@willieee802/zigbee-herdsman 0.48.3 → 0.49.1

package/src/zspec/zcl/definition/status.ts

@@ -0,0 +1,69 @@
+export enum Status {
+    /**  Operation was successful. */
+    SUCCESS = 0x00,
+    /**  Operation was not successful. */
+    FAILURE = 0x01,
+    /** The sender of the command does not have authorization to carry out this command. */
+    NOT_AUTHORIZED = 0x7e,
+    RESERVED = 0x7f,
+    /**
+     * The command appears to contain the wrong fields, as detected either by the presence of one or more invalid
+     * field entries or by there being missing fields.
+     * Command not carried out. Implementer has discretion as to whether to return this error or INVALID_FIELD.
+     */
+    MALFORMED_COMMAND = 0x80,
+    // UNSUP_CLUSTER_COMMAND = 0x81, DEPRECATED in favor of UNSUP_COMMAND
+    /** The specified command is not supported on the device. Command not carried out. */
+    UNSUP_COMMAND = 0x81,
+    UNSUP_GENERAL_COMMAND = 0x82, // DEPRECATED in favor of UNSUP_COMMAND
+    UNSUP_MANUF_CLUSTER_COMMAND = 0x83, // DEPRECATED in favor of UNSUP_COMMAND
+    UNSUP_MANUF_GENERAL_COMMAND = 0x84, // DEPRECATED in favor of UNSUP_COMMAND
+    /** At least one field of the command contains an incorrect value, according to the specification the device is implemented to. */
+    INVALID_FIELD = 0x85,
+    /** The specified attribute does not exist on the device. */
+    UNSUPPORTED_ATTRIBUTE = 0x86,
+    /**
+     * Out of range error or set to a reserved value. Attribute keeps its old value.
+     * Note that an attribute value may be out of range if an attribute is related to another,
+     * e.g., with minimum and maximum attributes. See the individual attribute descriptions for specific details.
+     */
+    INVALID_VALUE = 0x87,
+    /** Attempt to write a read-only attribute. */
+    READ_ONLY = 0x88,
+    /** An operation failed due to an insufficient amount of free space available. */
+    INSUFFICIENT_SPACE = 0x89,
+    DUPLICATE_EXISTS = 0x8a, // DEPRECATED in favor of SUCCESS
+    /** The requested information (e.g., table entry) could not be found. */
+    NOT_FOUND = 0x8b,
+    /** Periodic reports cannot be issued for this attribute.*/
+    UNREPORTABLE_ATTRIBUTE = 0x8c,
+    /** The data type given for an attribute is incorrect. Command not carried out.*/
+    INVALID_DATA_TYPE = 0x8d,
+    /** The selector for an attribute is incorrect. */
+    INVALID_SELECTOR = 0x8e,
+    WRITE_ONLY = 0x8f, // DEPRECATED in favor of NOT_AUTHORIZED
+    INCONSISTENT_STARTUP_STATE = 0x90, // DEPRECATED in favor of FAILURE
+    DEFINED_OUT_OF_BAND = 0x91, // DEPRECATED in favor of FAILURE
+    RESERVED14 = 0x92,
+    ACTION_DENIED = 0x93, // DEPRECATED in favor of FAILURE
+    /** The exchange was aborted due to excessive response time. */
+    TIMEOUT = 0x94,
+    /** Failed case when a client or a server decides to abort the upgrade process. */
+    ABORT = 0x95,
+    /** Invalid OTA upgrade image (ex. failed signature validation or signer information check or CRC check). */
+    INVALID_IMAGE = 0x96,
+    /** Server does not have data block available yet. */
+    WAIT_FOR_DATA = 0x97,
+    /** No OTA upgrade image available for the client. */
+    NO_IMAGE_AVAILABLE = 0x98,
+    /** The client still requires more OTA upgrade image files to successfully upgrade. */
+    REQUIRE_MORE_IMAGE = 0x99,
+    /** The command has been received and is being processed. */
+    NOTIFICATION_PENDING = 0x9a,
+    HARDWARE_FAILURE = 0xc0, // DEPRECATED in favor of FAILURE
+    SOFTWARE_FAILURE = 0xc1, // DEPRECATED in favor of FAILURE
+    RESERVED15 = 0xc2,
+    /** The cluster is not supported. */
+    UNSUPPORTED_CLUSTER = 0xc3,
+    LIMIT_REACHED = 0xc4, // DEPRECATED in favor of SUCCESS
+}

package/src/zspec/zcl/definition/tstype.ts

@@ -0,0 +1,432 @@
+import type {BuffaloZclDataType, DataType, DataTypeClass, Direction, FrameType, ParameterCondition, StructuredIndicatorType} from "./enums";
+
+export interface BuffaloZclOptions {
+    length?: number;
+    payload?: {
+        mode?: number; // used to read ListThermoTransitions
+        numoftrans?: number; // used to read ListThermoTransitions
+        commandID?: number; // used to read GpdFrame
+        payloadSize?: number; // used to read GpdFrame
+    } & {[key: string]: unknown};
+    dataType?: DataType | BuffaloZclDataType;
+    attrId?: number;
+}
+
+export interface ZclArray {
+    elementType: DataType | keyof typeof DataType;
+    elements: unknown[];
+}
+
+export interface StructuredSelector {
+    indexes?: number[];
+    indicatorType?: StructuredIndicatorType;
+}
+
+export interface KeyZclValue {
+    [s: string | number]: number | string;
+}
+
+export interface Struct {
+    elmType: DataType;
+    elmVal: unknown;
+}
+
+export interface ZclTimeOfDay {
+    /** [0-23] */
+    hours?: number;
+    /** [0-59] */
+    minutes?: number;
+    /** [0-59] */
+    seconds?: number;
+    /** [0-99] */
+    hundredths?: number;
+}
+
+export interface ZclDate {
+    /** [1900-2155], converted to/from [0-255] => value+1900=year */
+    year?: number;
+    /** [1-12] */
+    month?: number;
+    /** [1-31] */
+    dayOfMonth?: number;
+    /** [1-7] */
+    dayOfWeek?: number;
+}
+
+export interface ZoneInfo {
+    zoneID: number;
+    zoneStatus: number;
+}
+
+export interface ExtensionFieldSet {
+    clstId: number;
+    len: number;
+    extField: unknown[];
+}
+
+export interface ThermoTransition {
+    transitionTime: number;
+    heatSetpoint?: number;
+    coolSetpoint?: number;
+}
+
+export interface Gpd {
+    deviceID: number;
+    options: number;
+    extendedOptions: number;
+    securityKey: Buffer;
+    keyMic: number;
+    outgoingCounter: number;
+    applicationInfo: number;
+    manufacturerID: number;
+    modelID: number;
+    numGpdCommands: number;
+    gpdCommandIdList: Buffer;
+    numServerClusters: number;
+    numClientClusters: number;
+    gpdServerClusters: Buffer;
+    gpdClientClusters: Buffer;
+    genericSwitchConfig: number;
+    currentContactStatus: number;
+}
+
+export interface GpdChannelRequest {
+    nextChannel: number;
+    nextNextChannel: number;
+}
+
+export interface GpdChannelConfiguration {
+    commandID: number;
+    operationalChannel: number;
+    basic: boolean;
+}
+
+export interface GpdCommissioningReply {
+    commandID: number;
+    options: number;
+    /** expected valid if corresponding `options` bits set */
+    panID?: number;
+    /** expected valid if corresponding `options` bits set */
+    securityKey?: Buffer;
+    /** expected valid if corresponding `options` bits set */
+    keyMic?: number;
+    /** expected valid if corresponding `options` bits set */
+    frameCounter?: number;
+}
+
+export interface GpdCustomReply {
+    commandID: number;
+    buffer: Buffer;
+}
+
+export interface GpdAttributeReport {
+    manufacturerCode: number;
+    clusterID: number;
+    attributes: KeyZclValue;
+}
+
+export interface TuyaDataPointValue {
+    dp: number;
+    datatype: number;
+    data: Buffer;
+}
+
+export interface MiboxerZone {
+    zoneNum: number;
+    groupId: number;
+}
+
+export interface FrameControl {
+    reservedBits: number;
+    frameType: FrameType;
+    manufacturerSpecific: boolean;
+    direction: Direction;
+    disableDefaultResponse: boolean;
+}
+
+/**
+ * @see https://github.com/project-chip/zap/blob/master/zcl-builtin/dotdot/README.md#restrictions
+ */
+interface Restrictions {
+    /** specifies an exact length, generally used for a string. */
+    length?: number;
+    /** specifies the minimum length that a type must take, generally used for a string or a list/array */
+    minLen?: number;
+    /** specifies the maximum length that a type must take, generally used for a string or a list/array */
+    maxLen?: number;
+    /** sets a minimum that doesn't include the value specified, i.e. a field of this type must be strictly greater than the value */
+    minExcl?: number;
+    /** sets a minimum that includes the value specified, i.e. a field of this type must be greater than or equal than the value */
+    min?: number;
+    /** sets a maximum that doesn't include the value specified, i.e. a field of this type must be strictly less than the value */
+    maxExcl?: number;
+    /** sets a maximum that includes the value specified, i.e. a field of this type must be less than or equal to the value */
+    max?: number;
+    /** sets a minimum that is based on the value of the referenced attribute. The value of the referenced attribute is included in the range */
+    // minRef?: string;
+    /** sets a minimum that is based on the value of the referenced attribute. The value of the referenced attribute is excluded from the range */
+    // minExclRef?: string;
+    /** sets a maximum that is based on the value of the referenced attribute. The value of the referenced attribute is included in the range */
+    // maxRef?: string;
+    /** sets a maximum that is based on the value of the referenced attribute. The value of the referenced attribute is excluded from the range */
+    // maxExclRef?: string;
+    /**
+     * In some cases, a special value is defined by the Zigbee specification.
+     * In these cases, the special value along with a descriptor should be defined using this tag.
+     * Special values take precedence over other restrictions imposed (e.g. a special value may fall outside the min/max range for the attribute).
+     * `value` is kept as string for easier handling (will be checked on spot if used anyway) though most often is a hex number string (without 0x)
+     */
+    special?: [name: string, value: string][];
+}
+
+/**
+ * @see https://github.com/project-chip/zap/blob/master/zcl-builtin/dotdot/README.md#attributes
+ * Extra metadata:
+ * - writableIf: Indicates an expression that specifies the writability of the attribute.
+ *               Defaults to true.
+ *               Note: An attribute is only writable if this attribute and the writable attribute are true.
+ * - requiredIf: Allows for an expression to be implemented which indicates the conditions in which an attribute is mandatory.
+ *               Defaults to false
+ */
+export interface Attribute extends Restrictions {
+    ID: number;
+    name: string;
+    type: DataType;
+    manufacturerCode?: number;
+    /** If the attribute is readable OTA. Defaults to true. NOTE: marked as `R` in spec PDF */
+    read?: false;
+    /** If the attribute is writable OTA. Defaults to false. NOTE: marked as `W` in spec PDF */
+    write?: true;
+    /** If the attribute is specified as writable this indicates if the write is required (returns READ_ONLY if not). Defaults to false. */
+    writeOptional?: true;
+    /** If attribute is required to be reportable. Defaults to false. NOTE: marked as `P` in spec PDF */
+    report?: true;
+    /** If attribute is required to be part of the scene extensions. Defaults to false. NOTE: marked as `S` in spec PDF */
+    scene?: true;
+    /** If the attribute is mandatory. Defaults to false */
+    required?: true;
+    /** Specifies the default value of an attribute. No Default */
+    default?: number | string;
+    /**
+     * Specifies that the default value of the attribute takes the value of the referenced attribute.
+     * Must be another attriibute in this cluster.
+     * Referenced by name, schema forces this during validation.
+     */
+    // defaultRef?: string;
+    /** If attribute is client side */
+    client?: true;
+}
+
+export interface Parameter extends Restrictions {
+    name: string;
+    type: DataType | BuffaloZclDataType;
+    conditions?: (
+        | {type: ParameterCondition.MINIMUM_REMAINING_BUFFER_BYTES; value: number}
+        | {type: ParameterCondition.BITMASK_SET; param: string; mask: number /* not set */; reversed?: boolean}
+        | {type: ParameterCondition.BITFIELD_ENUM; param: string; offset: number; size: number; value: number}
+        | {type: ParameterCondition.DATA_TYPE_CLASS_EQUAL; value: DataTypeClass}
+        | {type: ParameterCondition.FIELD_EQUAL; field: string; value: unknown; reversed?: boolean}
+        | {type: ParameterCondition.FIELD_GT; field: string; value: number /*; reversed?: boolean*/}
+    )[];
+    // XXX: current have no use for neither of below
+    /**
+     * When an array is present, specifies the size (in octets) of the field that specifies the array length.
+     * Defaults to 1.
+     */
+    // arrayLengthSize?: number;
+    /**
+     * When the number of elements in an array field is specified by another field which does not immediately precede an array field,
+     * that field may be referenced using this attribute.
+     */
+    // arrayLengthField?: string;
+}
+
+/**
+ * @see https://github.com/project-chip/zap/blob/master/zcl-builtin/dotdot/README.md#commands
+ * Extra metadata:
+ * - requiredIf: Allows for an expression to be implemented which indicates the conditions in which a command is mandatory. Defaults to false
+ */
+export interface Command {
+    ID: number;
+    name: string;
+    parameters: readonly Parameter[];
+    response?: number;
+    /** If the command is mandatory. Defaults to false */
+    required?: true;
+}
+
+export interface AttributeDefinition extends Omit<Attribute, "name"> {}
+
+export interface CommandDefinition extends Omit<Command, "name"> {
+    parameters: readonly Parameter[];
+}
+
+export interface Cluster {
+    ID: number;
+    name: string;
+    manufacturerCode?: number;
+    attributes: {[s: string]: Attribute};
+    commands: {
+        [s: string]: Command;
+    };
+    commandsResponse: {
+        [s: string]: Command;
+    };
+    getAttribute: (key: number | string) => Attribute | undefined;
+    getCommand: (key: number | string) => Command;
+    getCommandResponse: (key: number | string) => Command;
+}
+
+export interface ClusterDefinition {
+    ID: number;
+    manufacturerCode?: number;
+    attributes: Readonly<Record<string, Readonly<AttributeDefinition>>>;
+    commands: Readonly<Record<string, Readonly<CommandDefinition>>>;
+    commandsResponse: Readonly<Record<string, Readonly<CommandDefinition>>>;
+}
+
+export interface CustomClusters {
+    [k: string]: ClusterDefinition;
+}
+
+export type ClusterName =
+    | "genBasic"
+    | "genPowerCfg"
+    | "genDeviceTempCfg"
+    | "genIdentify"
+    | "genGroups"
+    | "genScenes"
+    | "genOnOff"
+    | "genOnOffSwitchCfg"
+    | "genLevelCtrl"
+    | "genAlarms"
+    | "genTime"
+    | "genRssiLocation"
+    | "genAnalogInput"
+    | "genAnalogOutput"
+    | "genAnalogValue"
+    | "genBinaryInput"
+    | "genBinaryOutput"
+    | "genBinaryValue"
+    | "genMultistateInput"
+    | "genMultistateOutput"
+    | "genMultistateValue"
+    | "genCommissioning"
+    | "piPartition"
+    | "genOta"
+    | "powerProfile"
+    | "haApplianceControl"
+    | "pulseWidthModulation"
+    | "genPollCtrl"
+    | "greenPower"
+    | "mobileDeviceCfg"
+    | "neighborCleaning"
+    | "nearestGateway"
+    | "keepAlive"
+    | "closuresShadeCfg"
+    | "closuresDoorLock"
+    | "closuresWindowCovering"
+    | "barrierControl"
+    | "hvacPumpCfgCtrl"
+    | "hvacThermostat"
+    | "hvacFanCtrl"
+    | "hvacDehumidificationCtrl"
+    | "hvacUserInterfaceCfg"
+    | "lightingColorCtrl"
+    | "lightingBallastCfg"
+    | "msIlluminanceMeasurement"
+    | "msIlluminanceLevelSensing"
+    | "msTemperatureMeasurement"
+    | "msPressureMeasurement"
+    | "msFlowMeasurement"
+    | "msRelativeHumidity"
+    | "msOccupancySensing"
+    | "msLeafWetness"
+    | "msSoilMoisture"
+    | "pHMeasurement"
+    | "msElectricalConductivity"
+    | "msWindSpeed"
+    | "msCarbonMonoxide"
+    | "msCO2"
+    | "msEthylene"
+    | "msEthyleneOxide"
+    | "msHydrogen"
+    | "msHydrogenSulfide"
+    | "msNitricOxide"
+    | "msNitrogenDioxide"
+    | "msOxygen"
+    | "msOzone"
+    | "msSulfurDioxide"
+    | "msDissolvedOxygen"
+    | "msBromate"
+    | "msChloramines"
+    | "msChlorine"
+    | "msFecalColiformAndEColi"
+    | "msFluoride"
+    | "msHaloaceticAcids"
+    | "msTotalTrihalomethanes"
+    | "msTotalColiformBacteria"
+    | "msTurbidity"
+    | "msCopper"
+    | "msLead"
+    | "msManganese"
+    | "msSulfate"
+    | "msBromodichloromethane"
+    | "msBromoform"
+    | "msChlorodibromomethane"
+    | "msChloroform"
+    | "msSodium"
+    | "pm25Measurement"
+    | "msFormaldehyde"
+    | "ssIasZone"
+    | "ssIasAce"
+    | "ssIasWd"
+    | "piGenericTunnel"
+    | "piBacnetProtocolTunnel"
+    | "piAnalogInputReg"
+    | "piAnalogInputExt"
+    | "piAnalogOutputReg"
+    | "piAnalogOutputExt"
+    | "piAnalogValueReg"
+    | "piAnalogValueExt"
+    | "piBinaryInputReg"
+    | "piBinaryInputExt"
+    | "piBinaryOutputReg"
+    | "piBinaryOutputExt"
+    | "piBinaryValueReg"
+    | "piBinaryValueExt"
+    | "piMultistateInputReg"
+    | "piMultistateInputExt"
+    | "piMultistateOutputReg"
+    | "piMultistateOutputExt"
+    | "piMultistateValueReg"
+    | "piMultistateValueExt"
+    | "pi11073ProtocolTunnel"
+    | "piIso7818ProtocolTunnel"
+    | "retailTunnel"
+    | "seMetering"
+    | "seTunneling"
+    | "telecommunicationsInformation"
+    | "telecommunicationsVoiceOverZigbee"
+    | "telecommunicationsChatting"
+    | "haApplianceIdentification"
+    | "seMeterIdentification"
+    | "haApplianceEventsAlerts"
+    | "haApplianceStatistics"
+    | "haElectricalMeasurement"
+    | "haDiagnostic"
+    | "touchlink"
+    | "manuSpecificPhilips"
+    | "manuSpecificPhilips2"
+    | "manuSpecificSinope"
+    | "manuSpecificTuya"
+    | "manuSpecificLumi"
+    | "manuSpecificTuya2"
+    | "manuSpecificTuya3"
+    | "manuSpecificSmartThingsArrivalSensor"
+    | "manuSpecificSiglisZigfred"
+    | "owonClearMetering"
+    | "zosungIRTransmit"
+    | "zosungIRControl"
+    | "manuSpecificProfalux1"
+    | "manuSpecificAmazonWWAH";

package/src/zspec/zcl/index.ts

@@ -0,0 +1,11 @@
+export {Clusters} from "./definition/cluster";
+export type * as ClustersTypes from "./definition/clusters-types";
+export * from "./definition/consts";
+export * from "./definition/enums";
+export {Foundation} from "./definition/foundation";
+export {ManufacturerCode} from "./definition/manufacturerCode";
+export {Status} from "./definition/status";
+export * as Utils from "./utils";
+export {ZclFrame as Frame} from "./zclFrame";
+export {ZclHeader as Header} from "./zclHeader";
+export {ZclStatusError as StatusError} from "./zclStatusError";