@willieee802/zigbee-herdsman 0.48.3 → 0.49.0

package/dist/adapter/ember/zdo.d.ts

@@ -1,925 +0,0 @@
-import { EmberEUI64, EmberExtendedPanId, EmberNodeId } from "./types";
-/** The endpoint where the ZigBee Device Object (ZDO) resides. */
-export declare const ZDO_ENDPOINT = 0;
-/** The profile ID used by the ZigBee Device Object (ZDO). */
-export declare const ZDO_PROFILE_ID = 0;
-/** ZDO messages start with a sequence number. */
-export declare const ZDO_MESSAGE_OVERHEAD = 1;
-/**
- * ZDO response status.
- *
- * Most responses to ZDO commands contain a status byte.
- * The meaning of this byte is defined by the ZigBee Device Profile.
- * uint8_t
- */
-export declare enum EmberZdoStatus {
-    ZDP_SUCCESS = 0,
-    ZDP_INVALID_REQUEST_TYPE = 128,
-    ZDP_DEVICE_NOT_FOUND = 129,
-    ZDP_INVALID_ENDPOINT = 130,
-    ZDP_NOT_ACTIVE = 131,
-    ZDP_NOT_SUPPORTED = 132,
-    ZDP_TIMEOUT = 133,
-    ZDP_NO_MATCH = 134,
-    ZDP_NO_ENTRY = 136,
-    ZDP_NO_DESCRIPTOR = 137,
-    ZDP_INSUFFICIENT_SPACE = 138,
-    ZDP_NOT_PERMITTED = 139,
-    ZDP_TABLE_FULL = 140,
-    ZDP_NOT_AUTHORIZED = 141,
-    ZDP_DEVICE_BINDING_TABLE_FULL = 142,
-    ZDP_INVALID_INDEX = 143,
-    ZDP_FRAME_TOO_LARGE = 144,
-    ZDP_BAD_KEY_NEGOTIATION_METHOD = 145,
-    ZDP_TEMPORARY_FAILURE = 146,
-    APS_SECURITY_FAIL = 173,
-    NWK_ALREADY_PRESENT = 197,
-    NWK_TABLE_FULL = 199,
-    NWK_UNKNOWN_DEVICE = 200,
-    NWK_MISSING_TLV = 214,
-    NWK_INVALID_TLV = 215
-}
-export type MACCapabilityFlags = {
-    /**
-     * The alternate PAN coordinator sub-field is one bit in length and shall be set to 1 if this node is capable of becoming a PAN coordinator.
-     * Otherwise, the alternative PAN coordinator sub-field shall be set to 0.
-     */
-    alternatePANCoordinator: number;
-    /**
-     * The device type sub-field is one bit in length and shall be set to 1 if this node is a full function device (FFD).
-     * Otherwise, the device type sub-field shall be set to 0, indicating a reduced function device (RFD).
-     */
-    deviceType: number;
-    /**
-     * The power source sub-field is one bit in length and shall be set to 1 if the current power source is mains power.
-     * Otherwise, the power source sub-field shall be set to 0.
-     * This information is derived from the node current power source field of the node power descriptor.
-     */
-    powerSource: number;
-    /**
-     * The receiver on when idle sub-field is one bit in length and shall be set to 1 if the device does not disable its receiver to
-     * conserve power during idle periods.
-     * Otherwise, the receiver on when idle sub-field shall be set to 0 (see also section 2.3.2.4.)
-     */
-    rxOnWhenIdle: number;
-    /** reserved */
-    reserved1: number;
-    /** reserved */
-    reserved2: number;
-    /**
-     * The security capability sub-field is one bit in length and shall be set to 1 if the device is capable of sending and receiving
-     * frames secured using the security suite specified in [B1].
-     * Otherwise, the security capability sub-field shall be set to 0.
-     */
-    securityCapability: number;
-    /** The allocate address sub-field is one bit in length and shall be set to 0 or 1. */
-    allocateAddress: number;
-};
-export type ZDOLQITableEntry = {
-    /**
-     * The 64-bit extended PAN identifier of the neighboring device.
-     *
-     * 64-bit
-     */
-    extendedPanId: EmberExtendedPanId;
-    /**
-     * 64-bit IEEE address that is unique to every device.
-     * If this value is unknown at the time of the request, this field shall be set to 0xffffffffffffffff.
-     *
-     * 64-bit
-     */
-    eui64: EmberEUI64;
-    /** The 16-bit network address of the neighboring device. 16-bit */
-    nodeId: EmberNodeId;
-    /**
-     * The type of the neighbor device:
-     * 0x00 = ZigBee coordinator
-     * 0x01 = ZigBee router
-     * 0x02 = ZigBee end device
-     * 0x03 = Unknown
-     *
-     * 2-bit
-     */
-    deviceType: number;
-    /**
-     * Indicates if neighbor's receiver is enabled during idle portions of the CAP:
-     * 0x00 = Receiver is off
-     * 0x01 = Receiver is on
-     * 0x02 = unknown
-     *
-     * 2-bit
-     */
-    rxOnWhenIdle: number;
-    /**
-     * The relationship between the neighbor and the current device:
-     * 0x00 = neighbor is the parent
-     * 0x01 = neighbor is a child
-     * 0x02 = neighbor is a sibling
-     * 0x03 = None of the above
-     * 0x04 = previous child
-     *
-     * 3-bit
-     */
-    relationship: number;
-    /** This reserved bit shall be set to 0. 1-bit */
-    reserved1: number;
-    /**
-     * An indication of whether the neighbor device is accepting join requests:
-     * 0x00 = neighbor is not accepting join requests
-     * 0x01 = neighbor is accepting join requests
-     * 0x02 = unknown
-     *
-     * 2-bit
-     */
-    permitJoining: number;
-    /** Each of these reserved bits shall be set to 0. 6-bit */
-    reserved2: number;
-    /**
-     * The tree depth of the neighbor device.
-     * A value of 0x00 indicates that the device is the ZigBee coordinator for the network
-     *
-     * 8-bit
-     */
-    depth: number;
-    /**
-     * The estimated link quality for RF transmissions from this device.
-     * See [B1] for discussion of how this is calculated.
-     *
-     * 8-bit
-     */
-    lqi: number;
-};
-export type ZDORoutingTableEntry = {
-    /** 16-bit network address of this route */
-    destinationAddress: EmberNodeId;
-    /**
-     * Status of the route
-     * 0x0=ACTIVE.
-     * 0x1=DISCOVERY_UNDERWAY.
-     * 0x2=DISCOVERY_FAILED.
-     * 0x3=INACTIVE.
-     * 0x4=VALIDATION_UNDERWAY
-     * 0x5-0x7=RESERVED
-     *
-     * 3-bit
-     */
-    status: number;
-    /**
-     * A flag indicating whether the device is a memory constrained concentrator
-     *
-     * 1-bit
-     */
-    memoryConstrained: number;
-    /**
-     * A flag indicating that the destination is a concentrator that issued a many-to-one request
-     *
-     * 1-bit
-     */
-    manyToOne: number;
-    /**
-     * A flag indicating that a route record command frame should be sent to the destination prior to the next data packet.
-     *
-     * 1-bit
-     */
-    routeRecordRequired: number;
-    /** 2-bit */
-    reserved: number;
-    /** 16-bit network address of the next hop on the way to the destination. */
-    nextHopAddress: EmberNodeId;
-};
-export type ZDOBindingTableEntry = {
-    /** The source IEEE address for the binding entry. */
-    sourceEui64: EmberEUI64;
-    /** The source endpoint for the binding entry. uint8_t */
-    sourceEndpoint: number;
-    /** The identifier of the cluster on the source device that is bound to the destination device. uint16_t */
-    clusterId: number;
-    /**
-     * The addressing mode for the destination address. This field can take one of the non-reserved values from the following list:
-     *   - 0x00 = reserved
-     *   - 0x01 = 16-bit group address for DstAddr and DstEndpoint not present
-     *   - 0x02 = reserved
-     *   - 0x03 = 64-bit extended address for DstAddr and DstEndp present
-     *   - 0x04 – 0xff = reserved
-     *
-     * uint8_t
-     */
-    destAddrMode: number;
-    /** The destination address for the binding entry. uint16_t or uint8_t[EUI64_SIZE] */
-    dest: EmberNodeId | EmberEUI64;
-    /**
-     * This field shall be present only if the DstAddrMode field has a value of 0x03 and, if present,
-     * shall be the destination endpoint for the binding entry.
-     * uint8_t or not present
-     */
-    destEndpoint?: number;
-};
-/** @see IEEE_ADDRESS_RESPONSE */
-export type IEEEAddressResponsePayload = {
-    eui64: EmberEUI64;
-    nodeId: EmberNodeId;
-    assocDevList: number[];
-};
-/** @see NETWORK_ADDRESS_RESPONSE */
-export type NetworkAddressResponsePayload = {
-    eui64: EmberEUI64;
-    nodeId: EmberNodeId;
-    assocDevList: number[];
-};
-/** @see MATCH_DESCRIPTORS_RESPONSE */
-export type MatchDescriptorsResponsePayload = {
-    nodeId: EmberNodeId;
-    endpointList: number[];
-};
-/** @see SIMPLE_DESCRIPTOR_RESPONSE */
-export type SimpleDescriptorResponsePayload = {
-    nodeId: EmberNodeId;
-    /** uint8_t  */
-    /** const uint16_t*  */
-    inClusterList: number[];
-    /** uint8_t  */
-    /** const uint16_t*  */
-    outClusterList: number[];
-    /** uint18_t  */
-    profileId: number;
-    /** uint16_t  */
-    deviceId: number;
-    /** uint8_t  */
-    endpoint: number;
-};
-/** @see NODE_DESCRIPTOR_RESPONSE */
-export type NodeDescriptorResponsePayload = {
-    nodeId: EmberNodeId;
-    logicalType: number;
-    macCapFlags: MACCapabilityFlags;
-    manufacturerCode: number;
-    stackRevision: number;
-};
-/** @see POWER_DESCRIPTOR_RESPONSE */
-export type PowerDescriptorResponsePayload = {
-    nodeId: EmberNodeId;
-    currentPowerMode: number;
-    availPowerSources: number;
-    currentPowerSource: number;
-    currentPowerSourceLevel: number;
-};
-/** @see ACTIVE_ENDPOINTS_RESPONSE */
-export type ActiveEndpointsResponsePayload = {
-    nodeId: EmberNodeId;
-    endpointList: number[];
-};
-/** @see LQI_TABLE_RESPONSE */
-export type LQITableResponsePayload = {
-    neighborTableEntries: number;
-    entryList: ZDOLQITableEntry[];
-};
-/** @see ROUTING_TABLE_RESPONSE */
-export type RoutingTableResponsePayload = {
-    routingTableEntries: number;
-    entryList: ZDORoutingTableEntry[];
-};
-/** @see BINDING_TABLE_RESPONSE */
-export type BindingTableResponsePayload = {
-    bindingTableEntries: number;
-    entryList: ZDOBindingTableEntry[];
-};
-/** @see END_DEVICE_ANNOUNCE */
-export type EndDeviceAnnouncePayload = {
-    nodeId: EmberNodeId;
-    eui64: EmberEUI64;
-    capabilities: MACCapabilityFlags;
-};
-/** @see PARENT_ANNOUNCE_RESPONSE */
-export type ParentAnnounceResponsePayload = {
-    children: EmberEUI64[];
-};
-/**
- * Defines for ZigBee device profile cluster IDs follow. These
- * include descriptions of the formats of the messages.
- *
- * Note that each message starts with a 1-byte transaction sequence
- * number. This sequence number is used to match a response command frame
- * to the request frame that it is replying to. The application shall
- * maintain a 1-byte counter that is copied into this field and incremented
- * by one for each command sent. When a value of 0xff is reached, the next
- * command shall re-start the counter with a value of 0x00.
- */
-/**
- * Network request: [transaction sequence number: 1]
- *                  [EUI64:8]   [type:1] [start index:1]
- */
-export declare const NETWORK_ADDRESS_REQUEST = 0;
-/**
- * Response: [transaction sequence number: 1]
- *           [status:1] [EUI64:8] [node ID:2]
- *           [ID count:1] [start index:1] [child ID:2]*
- */
-export declare const NETWORK_ADDRESS_RESPONSE = 32768;
-/**
- * IEEE request:    [transaction sequence number: 1]
- *                  [node ID:2] [type:1] [start index:1]
- *                  [type] = 0x00 single address response, ignore the start index
- *                  = 0x01 extended response -] sends kid's IDs as well
- */
-export declare const IEEE_ADDRESS_REQUEST = 1;
-/**
- * Response: [transaction sequence number: 1]
- *           [status:1] [EUI64:8] [node ID:2]
- *           [ID count:1] [start index:1] [child ID:2]*
- */
-export declare const IEEE_ADDRESS_RESPONSE = 32769;
-/**
- * Request:  [transaction sequence number: 1] [node ID:2] [tlvs: varies]
- */
-export declare const NODE_DESCRIPTOR_REQUEST = 2;
-/**
- * Response: [transaction sequence number: 1] [status:1] [node ID:2]
- *           [node descriptor: 13] [tlvs: varies]
- *
- * Node Descriptor field is divided into subfields of bitmasks as follows:
- *     (Note: All lengths below are given in bits rather than bytes.)
- *           Logical Type:                     3
- *           Complex Descriptor Available:     1
- *           User Descriptor Available:        1
- *           (reserved/unused):                3
- *           APS Flags:                        3
- *           Frequency Band:                   5
- *           MAC capability flags:             8
- *           Manufacturer Code:               16
- *           Maximum buffer size:              8
- *           Maximum incoming transfer size:  16
- *           Server mask:                     16
- *           Maximum outgoing transfer size:  16
- *           Descriptor Capability Flags:      8
- *    See ZigBee document 053474, Section 2.3.2.3 for more details.
- */
-export declare const NODE_DESCRIPTOR_RESPONSE = 32770;
-/**
- *
- * Request:  [transaction sequence number: 1] [node ID:2]
- */
-export declare const POWER_DESCRIPTOR_REQUEST = 3;
-/**
- * Response: [transaction sequence number: 1] [status:1] [node ID:2]
- *           [current power mode, available power sources:1]
- *           [current power source, current power source level:1]
- *     See ZigBee document 053474, Section 2.3.2.4 for more details.
- */
-export declare const POWER_DESCRIPTOR_RESPONSE = 32771;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [node ID:2] [endpoint:1]
- */
-export declare const SIMPLE_DESCRIPTOR_REQUEST = 4;
-/**
- * Response: [transaction sequence number: 1]
- *           [status:1] [node ID:2] [length:1] [endpoint:1]
- *           [app profile ID:2] [app device ID:2]
- *           [app device version, app flags:1]
- *           [input cluster count:1] [input cluster:2]*
- *           [output cluster count:1] [output cluster:2]*
- */
-export declare const SIMPLE_DESCRIPTOR_RESPONSE = 32772;
-/**
- *
- * Request:  [transaction sequence number: 1] [node ID:2]
- */
-export declare const ACTIVE_ENDPOINTS_REQUEST = 5;
-/**
- * Response: [transaction sequence number: 1]
- *           [status:1] [node ID:2] [endpoint count:1] [endpoint:1]*
- */
-export declare const ACTIVE_ENDPOINTS_RESPONSE = 32773;
-/**
- * Request:  [transaction sequence number: 1]
- *           [node ID:2] [app profile ID:2]
- *           [input cluster count:1] [input cluster:2]*
- *           [output cluster count:1] [output cluster:2]*
- */
-export declare const MATCH_DESCRIPTORS_REQUEST = 6;
-/**
- * Response: [transaction sequence number: 1]
- *           [status:1] [node ID:2] [endpoint count:1] [endpoint:1]*
- */
-export declare const MATCH_DESCRIPTORS_RESPONSE = 32774;
-/**
- * Request: [transaction sequence number: 1]
- *          [node ID:2] [EUI64:8] [capabilities:1]
- */
-export declare const END_DEVICE_ANNOUNCE = 19;
-/**
- * No response is sent.
- */
-export declare const END_DEVICE_ANNOUNCE_RESPONSE = 32787;
-/**
- * Request:  [transaction sequence number: 1] [server mask:2]
- */
-export declare const SYSTEM_SERVER_DISCOVERY_REQUEST = 21;
-/**
- * Response: [transaction sequence number: 1]
- *           [status (== EMBER_ZDP_SUCCESS):1] [server mask:2]
- */
-export declare const SYSTEM_SERVER_DISCOVERY_RESPONSE = 32789;
-/**
- * Request:  [transaction sequence number: 1]
- *           [number of children:1] [child EUI64:8]*
- */
-export declare const PARENT_ANNOUNCE = 31;
-/**
- * Response: [transaction sequence number: 1]
- *           [status: 1] [number of children:1] [child EUI64:8]*
- */
-export declare const PARENT_ANNOUNCE_RESPONSE = 32799;
-/**
- * Request:  [transaction sequence number: 1]
- *           [device of interest ID:2] [d-of-i EUI64:8]
- */
-export declare const FIND_NODE_CACHE_REQUEST = 28;
-/**
- * Response: [transaction sequence number: 1]
- *           [responder ID:2] [device of interest ID:2] [d-of-i EUI64:8]
- */
-export declare const FIND_NODE_CACHE_RESPONSE = 32796;
-/**
- * Request:  [transaction sequence number: 1]
- *           [node ID:2] [EUI64:8] [endpoint:1] [app profile ID:2]
- *           [input cluster count:1] [input cluster:2]*
- *           [output cluster count:1] [output cluster:2]*
- */
-export declare const END_DEVICE_BIND_REQUEST = 32;
-/**
- * Response: [transaction sequence number: 1] [status:1]
- */
-export declare const END_DEVICE_BIND_RESPONSE = 32800;
-/**
- * Request:  [transaction sequence number: 1]
- *           [clear all bindings request EUI64 TLV:Variable]
- * Clear all bindings request EUI64 TLV:
- *           [Count N:1][EUI64 1:8]...[EUI64 N:8]
- */
-export declare const CLEAR_ALL_BINDINGS_REQUEST = 43;
-/**
- * Response: [transaction sequence number: 1] [status:1]
- */
-export declare const CLEAR_ALL_BINDINGS_RESPONSE = 32811;
-/**
- *
- */
-export declare const UNICAST_BINDING = 3;
-/**
- *
- */
-export declare const UNICAST_MANY_TO_ONE_BINDING = 131;
-/**
- *
- */
-export declare const MULTICAST_BINDING = 1;
-/**
- * Request:  [transaction sequence number: 1]
- *           [source EUI64:8] [source endpoint:1]
- *           [cluster ID:2] [destination address:3 or 10]
- * Destination address:
- *           [0x01:1] [destination group:2]
- * Or:
- *           [0x03:1] [destination EUI64:8] [destination endpoint:1]
- *
- */
-export declare const BIND_REQUEST = 33;
-/**
- * Response: [transaction sequence number: 1] [status:1]
- */
-export declare const BIND_RESPONSE = 32801;
-/**
- * Request:  [transaction sequence number: 1]
- *           [source EUI64:8] [source endpoint:1]
- *           [cluster ID:2] [destination address:3 or 10]
- * Destination address:
- *           [0x01:1] [destination group:2]
- * Or:
- *           [0x03:1] [destination EUI64:8] [destination endpoint:1]
- *
- */
-export declare const UNBIND_REQUEST = 34;
-/**
- * Response: [transaction sequence number: 1] [status:1]
- */
-export declare const UNBIND_RESPONSE = 32802;
-/**
- * Request:  [transaction sequence number: 1] [start index:1]
- */
-export declare const LQI_TABLE_REQUEST = 49;
-/**
- * Response: [transaction sequence number: 1] [status:1]
- *           [neighbor table entries:1] [start index:1]
- *           [entry count:1] [entry:22]*
- *   [entry] = [extended PAN ID:8] [EUI64:8] [node ID:2]
- *             [device type, RX on when idle, relationship:1]
- *             [permit joining:1] [depth:1] [LQI:1]
- *
- * The device-type byte has the following fields:
- *
- *      Name          Mask        Values
- *
- *   device type      0x03     0x00 coordinator
- *                             0x01 router
- *                             0x02 end device
- *                             0x03 unknown
- *
- *   rx mode          0x0C     0x00 off when idle
- *                             0x04 on when idle
- *                             0x08 unknown
- *
- *   relationship     0x70     0x00 parent
- *                             0x10 child
- *                             0x20 sibling
- *                             0x30 other
- *                             0x40 previous child
- *   reserved         0x10
- *
- * The permit-joining byte has the following fields
- *
- *      Name          Mask        Values
- *
- *   permit joining   0x03     0x00 not accepting join requests
- *                             0x01 accepting join requests
- *                             0x02 unknown
- *   reserved         0xFC
- *
- */
-export declare const LQI_TABLE_RESPONSE = 32817;
-/**
- * Request:  [transaction sequence number: 1] [start index:1]
- */
-export declare const ROUTING_TABLE_REQUEST = 50;
-/**
- * Response: [transaction sequence number: 1] [status:1]
- *           [routing table entries:1] [start index:1]
- *           [entry count:1] [entry:5]*
- *   [entry] = [destination address:2]
- *             [status:1]
- *             [next hop:2]
- *
- *
- * The status byte has the following fields:
- *      Name          Mask        Values
- *
- *   status           0x07     0x00 active
- *                             0x01 discovery underway
- *                             0x02 discovery failed
- *                             0x03 inactive
- *                             0x04 validation underway
- *
- *   flags            0x38
- *                             0x08 memory constrained
- *                             0x10 many-to-one
- *                             0x20 route record required
- *
- *   reserved         0xC0
- */
-export declare const ROUTING_TABLE_RESPONSE = 32818;
-/**
- * Request:  [transaction sequence number: 1] [start index:1]
- */
-export declare const BINDING_TABLE_REQUEST = 51;
-/**
- * Response: [transaction sequence number: 1]
- *           [status:1] [binding table entries:1] [start index:1]
- *           [entry count:1] [entry:14/21]*
- *   [entry] = [source EUI64:8] [source endpoint:1] [cluster ID:2]
- *             [dest addr mode:1] [dest:2/8] [dest endpoint:0/1]
- * [br]
- * @note If Dest. Address Mode = 0x03, then the Long Dest. Address will be
- * used and Dest. endpoint will be included.  If Dest. Address Mode = 0x01,
- * then the Short Dest. Address will be used and there will be no Dest.
- * endpoint.
- */
-export declare const BINDING_TABLE_RESPONSE = 32819;
-/**
- * Request:  [transaction sequence number: 1] [EUI64:8] [flags:1]
- *          The flag bits are:
- *          0x40 remove children
- *          0x80 rejoin
- */
-export declare const LEAVE_REQUEST = 52;
-/**
- * Response: [transaction sequence number: 1] [status:1]
- */
-export declare const LEAVE_RESPONSE = 32820;
-/**
- * Request:  [transaction sequence number: 1]
- *           [duration:1] [permit authentication:1]
- */
-export declare const PERMIT_JOINING_REQUEST = 54;
-/**
- * Response: [transaction sequence number: 1] [status:1]
- */
-export declare const PERMIT_JOINING_RESPONSE = 32822;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [scan channels:4] [duration:1] [count:0/1] [manager:0/2]
- *
- *   If the duration is in 0x00 ... 0x05, 'count' is present but
- *   not 'manager'.  Perform 'count' scans of the given duration on the
- *   given channels.
- *
- *   If duration is 0xFE, 'channels' should have a single channel
- *   and 'count' and 'manager' are not present.  Switch to the indicated
- *   channel.
- *
- *   If duration is 0xFF, 'count' is not present.  Set the active
- *   channels and the network manager ID to the values given.
- *
- *   Unicast requests always get a response, which is INVALID_REQUEST if the
- *   duration is not a legal value.
- */
-export declare const NWK_UPDATE_REQUEST = 56;
-/**
- *
- * Response: [transaction sequence number: 1] [status:1]
- *   [scanned channels:4] [transmissions:2] [failures:2]
- *   [energy count:1] [energy:1]*
- */
-export declare const NWK_UPDATE_RESPONSE = 32824;
-/**
- *
- */
-export declare const NWK_UPDATE_ENHANCED_REQUEST = 57;
-/**
- *
- */
-export declare const NWK_UPDATE_ENHANCED_RESPONSE = 32825;
-/**
- *
- */
-export declare const NWK_UPDATE_IEEE_JOINING_LIST_REQUEST = 58;
-/**
- *
- */
-export declare const NWK_UPDATE_IEEE_JOINING_LIST_REPONSE = 32826;
-/**
- *
- */
-export declare const NWK_UNSOLICITED_ENHANCED_UPDATE_NOTIFY = 32827;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains one Beacon Survey Configuration TLV (variable octets),
- * which contain the ScanChannelListStructure (variable length)
- * and the ConfigurationBitmask (1 octet). This information provides
- * the configuration for the end device's beacon survey.
- * See R23 spec section 2.4.3.3.12 for the request and 3.2.2.2.1
- * for the ChannelListStructure.
- */
-export declare const BEACON_SURVEY_REQUEST = 60;
-/**
- *
- * Response:  [transaction sequence number: 1]
- *            [status: 1]
- *            [TLVs: varies]
- *
- * Contains one Beacon Survey Results TLV (4 octets), which contain
- * the number of on-network, off-network, potential parent and total
- * beacons recorded. If the device that received the request is not a
- * router, a Potential Parent TLV (variable octects) will be found. This
- * will contain information on the device's current parent, as well as
- * any potential parents found via beacons (up to a maximum of 5). A
- * Pan ID Conflict TLV can also found in the response.
- * See R23 spec section 2.4.4.3.13 for the response.
- */
-export declare const BEACON_SURVEY_RESPONSE = 32828;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains one or more Curve25519 Public Point TLVs (40 octets),
- * which contain an EUI64 and the 32-byte Curve public point.
- * See R23 spec section 2.4.3.4.1
- *
- * @note This command SHALL NOT be APS encrypted regardless of
- * whether sent before or after the device joins the network.
- * This command SHALL be network encrypted if the device has a
- * network key, i.e. it has joined the network earlier and wants
- * to negotiate or renegotiate a new link key; otherwise, if it
- * is used prior to joining the network, it SHALL NOT be network
- *  encrypted.
- */
-export declare const KEY_NEGOTIATION_REQUEST = 64;
-/**
- *
- * Response: [transaction sequence number: 1] [status:1]
- *           [TLVs: varies]
- *
- * Contains one or more Curve25519 Public Point TLVs (40 octets),
- * which contain an EUI64 and the 32-byte Curve public point, or
- * Local TLVs.
- * See R23 spec section 2.4.4.4.1
- *
- * @note This command SHALL NOT be APS encrypted. When performing
- * Key Negotiation with an unauthenticated neighbor that is not
- * yet on the network, network layer encryption SHALL NOT be used
- * on the message. If the message is being sent to unauthenticated
- * device that is not on the network and is not a neighbor, it
- * SHALL be relayed as described in section 4.6.3.7.7. Otherwise
- * the message SHALL have network layer encryption.
- */
-export declare const KEY_NEGOTIATION_RESPONSE = 32832;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains one or more Authentication Token ID TLVs (1 octet),
- * which contain the TLV Type Tag ID of the source of the
- * authentication token. See R23 spec section 2.4.3.4.2
- */
-export declare const AUTHENTICATION_TOKEN_REQUEST = 65;
-/**
- *
- * Response: [transaction sequence number: 1] [status:1]
- *           [TLVs: varies]
- *
- * Contains one or more 128-bit Symmetric Passphrase Global TLVs
- * (16 octets), which contain the symmetric passphrase authentication
- * token. See R23 spec section 2.4.4.4.2
- */
-export declare const AUTHENTICATION_TOKEN_RESPONSE = 32833;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains one or more Target IEEE Address TLVs (8 octets),
- * which contain the EUI64 of the device of interest.
- * See R23 spec section 2.4.3.4.3
- */
-export declare const AUTHENTICATION_LEVEL_REQUEST = 66;
-/**
- *
- * Response: [transaction sequence number: 1] [status:1]
- *           [TLVs: varies]
- *
- * Contains one or more Device Authentication Level TLVs
- * (10 octets), which contain the EUI64 of the inquired device,
- * along with the its initial join method and its active link
- * key update method.
- * See R23 spec section 2.4.4.4.3
- */
-export declare const AUTHENTICATION_LEVEL_RESPONSE = 32834;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains one or more Global TLVs (1 octet),
- * which contain the TLV Type Tag ID, and their
- * value.
- */
-export declare const SET_CONFIGURATION_REQUEST = 67;
-/**
- *
- * Response: [transaction sequence number: 1] [status:1]
- */
-export declare const SET_CONFIGURATION_RESPONSE = 32835;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains one or more TLVs (1 octet),
- * which the sender wants to get information
- */
-export declare const GET_CONFIGURATION_REQUEST = 68;
-/**
- *
- * Response: [transaction sequence number: 1] [status:1]
- *           [TLVs: varies]
- *
- * Contains one or more TLV tag Ids and their values
- * in response to the request
- */
-export declare const GET_CONFIGURATION_RESPONSE = 32836;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains one or more TLVs. These TLVs can be Selected Key
- * Negotiation Method TLVs (10 octets), Fragmentation Parameters
- * Global TLVs (5 octets), or other TLVs.
- * See R23 spec section 2.4.3.4.6
- *
- * @note This SHALL NOT be APS encrypted or NWK encrypted if the
- * link key update mechanism is done as part of the initial join
- * and before the receiving device has been issued a network
- * key. This SHALL be both APS encrypted and NWK encrypted if
- * the link key update mechanism is performed to refresh the
- * link key when the receiving device has the network key and
- * has previously successfully joined the network.
- */
-export declare const KEY_UPDATE_REQUEST = 69;
-/**
- *
- * Response: [transaction sequence number: 1] [status:1]
- *
- * See R23 spec section 2.4.4.4.6
- *
- * @note This command SHALL be APS encrypted.
- */
-export declare const KEY_UPDATE_RESPONSE = 32837;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [security decommission request EUI64 TLV:Variable]
- * Security Decommission request EUI64 TLV:
- *           [Count N:1][EUI64 1:8]...[EUI64 N:8]
- */
-export declare const SECURITY_DECOMMISSION_REQUEST = 70;
-/**
- *
- * Response: [transaction sequence number: 1] [status:1]
- */
-export declare const SECURITY_DECOMMISSION_RESPONSE = 32838;
-/**
- *
- * Request:  [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains at least the APS Frame Counter Challenge TLV, which holds the
- * sender EUI and the 64 bit challenge value.
- */
-export declare const SECURITY_CHALLENGE_REQUEST = 71;
-/**
- *
- * Response: [transaction sequence number: 1]
- *           [TLVs: varies]
- *
- * Contains at least the APS Frame Counter Response TLV, which holds the
- * sender EUI, received challenge value, APS frame counter, challenge
- * security frame counter, and 8-byte MIC.
- */
-export declare const SECURITY_CHALLENGE_RESPONSE = 32839;
-/**
- *
- */
-export declare const COMPLEX_DESCRIPTOR_REQUEST = 16;
-/**
- *
- */
-export declare const COMPLEX_DESCRIPTOR_RESPONSE = 32784;
-/**
- *
- */
-export declare const USER_DESCRIPTOR_REQUEST = 17;
-/**
- *
- */
-export declare const USER_DESCRIPTOR_RESPONSE = 32785;
-/**
- *
- */
-export declare const DISCOVERY_REGISTER_REQUEST = 18;
-/**
- *
- */
-export declare const DISCOVERY_REGISTER_RESPONSE = 32786;
-/**
- *
- */
-export declare const USER_DESCRIPTOR_SET = 20;
-/**
- *
- */
-export declare const USER_DESCRIPTOR_CONFIRM = 32788;
-/**
- *
- */
-export declare const NETWORK_DISCOVERY_REQUEST = 48;
-/**
- *
- */
-export declare const NETWORK_DISCOVERY_RESPONSE = 32816;
-/**
- *
- */
-export declare const DIRECT_JOIN_REQUEST = 53;
-/**
- *
- */
-export declare const DIRECT_JOIN_RESPONSE = 32821;
-/**
- * Response: [transaction sequence number: 1]
- *            [status (== EMBER_ZDP_SUCCESS):1]
- */
-export declare const DISCOVERY_CACHE_REQUEST = 18;
-/**
- * Request:  [transaction sequence number: 1]
- *            [source node ID:2] [source EUI64:8]
- */
-export declare const DISCOVERY_CACHE_RESPONSE = 32786;
-export declare const CLUSTER_ID_RESPONSE_MINIMUM = 32768;
-//# sourceMappingURL=zdo.d.ts.map