@willieee802/zigbee-herdsman 0.19.21 → 0.36.0

package/dist/adapter/ember/zdo.js

@@ -0,0 +1,723 @@
+"use strict";
+//------------------------------------------------------------------------------
+// ZigBee Device Object (ZDO)
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.NWK_UPDATE_ENHANCED_REQUEST = exports.NWK_UPDATE_RESPONSE = exports.NWK_UPDATE_REQUEST = exports.PERMIT_JOINING_RESPONSE = exports.PERMIT_JOINING_REQUEST = exports.LEAVE_RESPONSE = exports.LEAVE_REQUEST = exports.BINDING_TABLE_RESPONSE = exports.BINDING_TABLE_REQUEST = exports.ROUTING_TABLE_RESPONSE = exports.ROUTING_TABLE_REQUEST = exports.LQI_TABLE_RESPONSE = exports.LQI_TABLE_REQUEST = exports.UNBIND_RESPONSE = exports.UNBIND_REQUEST = exports.BIND_RESPONSE = exports.BIND_REQUEST = exports.MULTICAST_BINDING = exports.UNICAST_MANY_TO_ONE_BINDING = exports.UNICAST_BINDING = exports.CLEAR_ALL_BINDINGS_RESPONSE = exports.CLEAR_ALL_BINDINGS_REQUEST = exports.END_DEVICE_BIND_RESPONSE = exports.END_DEVICE_BIND_REQUEST = exports.FIND_NODE_CACHE_RESPONSE = exports.FIND_NODE_CACHE_REQUEST = exports.PARENT_ANNOUNCE_RESPONSE = exports.PARENT_ANNOUNCE = exports.SYSTEM_SERVER_DISCOVERY_RESPONSE = exports.SYSTEM_SERVER_DISCOVERY_REQUEST = exports.END_DEVICE_ANNOUNCE_RESPONSE = exports.END_DEVICE_ANNOUNCE = exports.MATCH_DESCRIPTORS_RESPONSE = exports.MATCH_DESCRIPTORS_REQUEST = exports.ACTIVE_ENDPOINTS_RESPONSE = exports.ACTIVE_ENDPOINTS_REQUEST = exports.SIMPLE_DESCRIPTOR_RESPONSE = exports.SIMPLE_DESCRIPTOR_REQUEST = exports.POWER_DESCRIPTOR_RESPONSE = exports.POWER_DESCRIPTOR_REQUEST = exports.NODE_DESCRIPTOR_RESPONSE = exports.NODE_DESCRIPTOR_REQUEST = exports.IEEE_ADDRESS_RESPONSE = exports.IEEE_ADDRESS_REQUEST = exports.NETWORK_ADDRESS_RESPONSE = exports.NETWORK_ADDRESS_REQUEST = exports.EmberZdoStatus = exports.ZDO_MESSAGE_OVERHEAD = exports.ZDO_PROFILE_ID = exports.ZDO_ENDPOINT = void 0;
+exports.CLUSTER_ID_RESPONSE_MINIMUM = exports.DISCOVERY_CACHE_RESPONSE = exports.DISCOVERY_CACHE_REQUEST = exports.DIRECT_JOIN_RESPONSE = exports.DIRECT_JOIN_REQUEST = exports.NETWORK_DISCOVERY_RESPONSE = exports.NETWORK_DISCOVERY_REQUEST = exports.USER_DESCRIPTOR_CONFIRM = exports.USER_DESCRIPTOR_SET = exports.DISCOVERY_REGISTER_RESPONSE = exports.DISCOVERY_REGISTER_REQUEST = exports.USER_DESCRIPTOR_RESPONSE = exports.USER_DESCRIPTOR_REQUEST = exports.COMPLEX_DESCRIPTOR_RESPONSE = exports.COMPLEX_DESCRIPTOR_REQUEST = exports.SECURITY_CHALLENGE_RESPONSE = exports.SECURITY_CHALLENGE_REQUEST = exports.SECURITY_DECOMMISSION_RESPONSE = exports.SECURITY_DECOMMISSION_REQUEST = exports.KEY_UPDATE_RESPONSE = exports.KEY_UPDATE_REQUEST = exports.GET_CONFIGURATION_RESPONSE = exports.GET_CONFIGURATION_REQUEST = exports.SET_CONFIGURATION_RESPONSE = exports.SET_CONFIGURATION_REQUEST = exports.AUTHENTICATION_LEVEL_RESPONSE = exports.AUTHENTICATION_LEVEL_REQUEST = exports.AUTHENTICATION_TOKEN_RESPONSE = exports.AUTHENTICATION_TOKEN_REQUEST = exports.KEY_NEGOTIATION_RESPONSE = exports.KEY_NEGOTIATION_REQUEST = exports.BEACON_SURVEY_RESPONSE = exports.BEACON_SURVEY_REQUEST = exports.NWK_UNSOLICITED_ENHANCED_UPDATE_NOTIFY = exports.NWK_UPDATE_IEEE_JOINING_LIST_REPONSE = exports.NWK_UPDATE_IEEE_JOINING_LIST_REQUEST = exports.NWK_UPDATE_ENHANCED_RESPONSE = void 0;
+/** The endpoint where the ZigBee Device Object (ZDO) resides. */
+exports.ZDO_ENDPOINT = 0;
+/** The profile ID used by the ZigBee Device Object (ZDO). */
+exports.ZDO_PROFILE_ID = 0x0000;
+/** ZDO messages start with a sequence number. */
+exports.ZDO_MESSAGE_OVERHEAD = 1;
+/**
+ * ZDO response status.
+ *
+ * Most responses to ZDO commands contain a status byte.
+ * The meaning of this byte is defined by the ZigBee Device Profile.
+ * uint8_t
+ */
+var EmberZdoStatus;
+(function (EmberZdoStatus) {
+    // These values are taken from Table 48 of ZDP Errata 043238r003 and Table 2
+    // of NWK 02130r10.
+    EmberZdoStatus[EmberZdoStatus["ZDP_SUCCESS"] = 0] = "ZDP_SUCCESS";
+    // 0x01 to 0x7F are reserved
+    EmberZdoStatus[EmberZdoStatus["ZDP_INVALID_REQUEST_TYPE"] = 128] = "ZDP_INVALID_REQUEST_TYPE";
+    EmberZdoStatus[EmberZdoStatus["ZDP_DEVICE_NOT_FOUND"] = 129] = "ZDP_DEVICE_NOT_FOUND";
+    EmberZdoStatus[EmberZdoStatus["ZDP_INVALID_ENDPOINT"] = 130] = "ZDP_INVALID_ENDPOINT";
+    EmberZdoStatus[EmberZdoStatus["ZDP_NOT_ACTIVE"] = 131] = "ZDP_NOT_ACTIVE";
+    EmberZdoStatus[EmberZdoStatus["ZDP_NOT_SUPPORTED"] = 132] = "ZDP_NOT_SUPPORTED";
+    EmberZdoStatus[EmberZdoStatus["ZDP_TIMEOUT"] = 133] = "ZDP_TIMEOUT";
+    EmberZdoStatus[EmberZdoStatus["ZDP_NO_MATCH"] = 134] = "ZDP_NO_MATCH";
+    // 0x87 is reserved                  = 0x87,
+    EmberZdoStatus[EmberZdoStatus["ZDP_NO_ENTRY"] = 136] = "ZDP_NO_ENTRY";
+    EmberZdoStatus[EmberZdoStatus["ZDP_NO_DESCRIPTOR"] = 137] = "ZDP_NO_DESCRIPTOR";
+    EmberZdoStatus[EmberZdoStatus["ZDP_INSUFFICIENT_SPACE"] = 138] = "ZDP_INSUFFICIENT_SPACE";
+    EmberZdoStatus[EmberZdoStatus["ZDP_NOT_PERMITTED"] = 139] = "ZDP_NOT_PERMITTED";
+    EmberZdoStatus[EmberZdoStatus["ZDP_TABLE_FULL"] = 140] = "ZDP_TABLE_FULL";
+    EmberZdoStatus[EmberZdoStatus["ZDP_NOT_AUTHORIZED"] = 141] = "ZDP_NOT_AUTHORIZED";
+    EmberZdoStatus[EmberZdoStatus["ZDP_DEVICE_BINDING_TABLE_FULL"] = 142] = "ZDP_DEVICE_BINDING_TABLE_FULL";
+    EmberZdoStatus[EmberZdoStatus["ZDP_INVALID_INDEX"] = 143] = "ZDP_INVALID_INDEX";
+    EmberZdoStatus[EmberZdoStatus["ZDP_FRAME_TOO_LARGE"] = 144] = "ZDP_FRAME_TOO_LARGE";
+    EmberZdoStatus[EmberZdoStatus["ZDP_BAD_KEY_NEGOTIATION_METHOD"] = 145] = "ZDP_BAD_KEY_NEGOTIATION_METHOD";
+    EmberZdoStatus[EmberZdoStatus["ZDP_TEMPORARY_FAILURE"] = 146] = "ZDP_TEMPORARY_FAILURE";
+    EmberZdoStatus[EmberZdoStatus["APS_SECURITY_FAIL"] = 173] = "APS_SECURITY_FAIL";
+    EmberZdoStatus[EmberZdoStatus["NWK_ALREADY_PRESENT"] = 197] = "NWK_ALREADY_PRESENT";
+    EmberZdoStatus[EmberZdoStatus["NWK_TABLE_FULL"] = 199] = "NWK_TABLE_FULL";
+    EmberZdoStatus[EmberZdoStatus["NWK_UNKNOWN_DEVICE"] = 200] = "NWK_UNKNOWN_DEVICE";
+    EmberZdoStatus[EmberZdoStatus["NWK_MISSING_TLV"] = 214] = "NWK_MISSING_TLV";
+    EmberZdoStatus[EmberZdoStatus["NWK_INVALID_TLV"] = 215] = "NWK_INVALID_TLV";
+})(EmberZdoStatus || (exports.EmberZdoStatus = EmberZdoStatus = {}));
+;
+/**
+ * Defines for ZigBee device profile cluster IDs follow. These
+ * include descriptions of the formats of the messages.
+ *
+ * Note that each message starts with a 1-byte transaction sequence
+ * number. This sequence number is used to match a response command frame
+ * to the request frame that it is replying to. The application shall
+ * maintain a 1-byte counter that is copied into this field and incremented
+ * by one for each command sent. When a value of 0xff is reached, the next
+ * command shall re-start the counter with a value of 0x00.
+ */
+// Network and IEEE Address Request/Response
+/**
+ * Network request: [transaction sequence number: 1]
+ *                  [EUI64:8]   [type:1] [start index:1]
+ */
+exports.NETWORK_ADDRESS_REQUEST = 0x0000;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [EUI64:8] [node ID:2]
+ *           [ID count:1] [start index:1] [child ID:2]*
+ */
+exports.NETWORK_ADDRESS_RESPONSE = 0x8000;
+/**
+ * IEEE request:    [transaction sequence number: 1]
+ *                  [node ID:2] [type:1] [start index:1]
+ *                  [type] = 0x00 single address response, ignore the start index
+ *                  = 0x01 extended response -] sends kid's IDs as well
+ */
+exports.IEEE_ADDRESS_REQUEST = 0x0001;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [EUI64:8] [node ID:2]
+ *           [ID count:1] [start index:1] [child ID:2]*
+ */
+exports.IEEE_ADDRESS_RESPONSE = 0x8001;
+// Node Descriptor Request/Response
+/**
+ * Request:  [transaction sequence number: 1] [node ID:2] [tlvs: varies]
+ */
+exports.NODE_DESCRIPTOR_REQUEST = 0x0002;
+/**
+ * Response: [transaction sequence number: 1] [status:1] [node ID:2]
+ *           [node descriptor: 13] [tlvs: varies]
+ *
+ * Node Descriptor field is divided into subfields of bitmasks as follows:
+ *     (Note: All lengths below are given in bits rather than bytes.)
+ *           Logical Type:                     3
+ *           Complex Descriptor Available:     1
+ *           User Descriptor Available:        1
+ *           (reserved/unused):                3
+ *           APS Flags:                        3
+ *           Frequency Band:                   5
+ *           MAC capability flags:             8
+ *           Manufacturer Code:               16
+ *           Maximum buffer size:              8
+ *           Maximum incoming transfer size:  16
+ *           Server mask:                     16
+ *           Maximum outgoing transfer size:  16
+ *           Descriptor Capability Flags:      8
+ *    See ZigBee document 053474, Section 2.3.2.3 for more details.
+ */
+exports.NODE_DESCRIPTOR_RESPONSE = 0x8002;
+// Power Descriptor Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1] [node ID:2]
+ */
+exports.POWER_DESCRIPTOR_REQUEST = 0x0003;
+/**
+ * Response: [transaction sequence number: 1] [status:1] [node ID:2]
+ *           [current power mode, available power sources:1]
+ *           [current power source, current power source level:1]
+ *     See ZigBee document 053474, Section 2.3.2.4 for more details.
+ */
+exports.POWER_DESCRIPTOR_RESPONSE = 0x8003;
+// Simple Descriptor Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [node ID:2] [endpoint:1]
+ */
+exports.SIMPLE_DESCRIPTOR_REQUEST = 0x0004;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [node ID:2] [length:1] [endpoint:1]
+ *           [app profile ID:2] [app device ID:2]
+ *           [app device version, app flags:1]
+ *           [input cluster count:1] [input cluster:2]*
+ *           [output cluster count:1] [output cluster:2]*
+ */
+exports.SIMPLE_DESCRIPTOR_RESPONSE = 0x8004;
+// Active Endpoints Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1] [node ID:2]
+ */
+exports.ACTIVE_ENDPOINTS_REQUEST = 0x0005;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [node ID:2] [endpoint count:1] [endpoint:1]*
+ */
+exports.ACTIVE_ENDPOINTS_RESPONSE = 0x8005;
+// Match Descriptors Request / Response
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [node ID:2] [app profile ID:2]
+ *           [input cluster count:1] [input cluster:2]*
+ *           [output cluster count:1] [output cluster:2]*
+ */
+exports.MATCH_DESCRIPTORS_REQUEST = 0x0006;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [node ID:2] [endpoint count:1] [endpoint:1]*
+ */
+exports.MATCH_DESCRIPTORS_RESPONSE = 0x8006;
+// End Device Announce and End Device Announce Response
+/**
+ * Request: [transaction sequence number: 1]
+ *          [node ID:2] [EUI64:8] [capabilities:1]
+ */
+exports.END_DEVICE_ANNOUNCE = 0x0013;
+/**
+ * No response is sent.
+ */
+exports.END_DEVICE_ANNOUNCE_RESPONSE = 0x8013;
+// System Server Discovery Request / Response
+// This is broadcast and only servers which have matching services respond. 
+// The response contains the request services that the recipient provides.
+/**
+ * Request:  [transaction sequence number: 1] [server mask:2]
+ */
+exports.SYSTEM_SERVER_DISCOVERY_REQUEST = 0x0015;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status (== EMBER_ZDP_SUCCESS):1] [server mask:2]
+ */
+exports.SYSTEM_SERVER_DISCOVERY_RESPONSE = 0x8015;
+// Parent Announce and Parent Announce Response
+// This is broadcast and only servers which have matching children respond.
+// The response contains the list of children that the recipient now holds.
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [number of children:1] [child EUI64:8] [child Age:4]*
+ */
+exports.PARENT_ANNOUNCE = 0x001F;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [number of children:1] [child EUI64:8] [child Age:4]*
+ */
+exports.PARENT_ANNOUNCE_RESPONSE = 0x801F;
+// Find Node Cache Request / Response
+// This is broadcast and only discovery servers which have the information for the device of interest, or the device of interest itself, respond.
+// The requesting device can then direct any service discovery requests to the responder.
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [device of interest ID:2] [d-of-i EUI64:8]
+ */
+exports.FIND_NODE_CACHE_REQUEST = 0x001C;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [responder ID:2] [device of interest ID:2] [d-of-i EUI64:8]
+ */
+exports.FIND_NODE_CACHE_RESPONSE = 0x801C;
+// End Device Bind Request / Response
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [node ID:2] [EUI64:8] [endpoint:1] [app profile ID:2]
+ *           [input cluster count:1] [input cluster:2]*
+ *           [output cluster count:1] [output cluster:2]*
+ */
+exports.END_DEVICE_BIND_REQUEST = 0x0020;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+exports.END_DEVICE_BIND_RESPONSE = 0x8020;
+// Clear All Bindings Request / Response
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [clear all bindings request EUI64 TLV:Variable]
+ * Clear all bindings request EUI64 TLV:
+ *           [Count N:1][EUI64 1:8]...[EUI64 N:8]
+ */
+exports.CLEAR_ALL_BINDINGS_REQUEST = 0x002B;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+exports.CLEAR_ALL_BINDINGS_RESPONSE = 0x802B;
+// Binding types and Request / Response
+// Bind and unbind have the same formats.
+// There are two possible formats, depending on whether the destination is a group address or a device address.
+// Device addresses include an endpoint, groups don't.
+/**
+ *
+ */
+exports.UNICAST_BINDING = 0x03;
+/**
+ *
+ */
+exports.UNICAST_MANY_TO_ONE_BINDING = 0x83;
+/**
+ *
+ */
+exports.MULTICAST_BINDING = 0x01;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [source EUI64:8] [source endpoint:1]
+ *           [cluster ID:2] [destination address:3 or 10]
+ * Destination address:
+ *           [0x01:1] [destination group:2]
+ * Or:
+ *           [0x03:1] [destination EUI64:8] [destination endpoint:1]
+ *
+ */
+exports.BIND_REQUEST = 0x0021;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+exports.BIND_RESPONSE = 0x8021;
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [source EUI64:8] [source endpoint:1]
+ *           [cluster ID:2] [destination address:3 or 10]
+ * Destination address:
+ *           [0x01:1] [destination group:2]
+ * Or:
+ *           [0x03:1] [destination EUI64:8] [destination endpoint:1]
+ *
+ */
+exports.UNBIND_REQUEST = 0x0022;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+exports.UNBIND_RESPONSE = 0x8022;
+// LQI Table Request / Response
+/**
+ * Request:  [transaction sequence number: 1] [start index:1]
+ */
+exports.LQI_TABLE_REQUEST = 0x0031;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [neighbor table entries:1] [start index:1]
+ *           [entry count:1] [entry:22]*
+ *   [entry] = [extended PAN ID:8] [EUI64:8] [node ID:2]
+ *             [device type, RX on when idle, relationship:1]
+ *             [permit joining:1] [depth:1] [LQI:1]
+ *
+ * The device-type byte has the following fields:
+ *
+ *      Name          Mask        Values
+ *
+ *   device type      0x03     0x00 coordinator
+ *                             0x01 router
+ *                             0x02 end device
+ *                             0x03 unknown
+ *
+ *   rx mode          0x0C     0x00 off when idle
+ *                             0x04 on when idle
+ *                             0x08 unknown
+ *
+ *   relationship     0x70     0x00 parent
+ *                             0x10 child
+ *                             0x20 sibling
+ *                             0x30 other
+ *                             0x40 previous child
+ *   reserved         0x10
+ *
+ * The permit-joining byte has the following fields
+ *
+ *      Name          Mask        Values
+ *
+ *   permit joining   0x03     0x00 not accepting join requests
+ *                             0x01 accepting join requests
+ *                             0x02 unknown
+ *   reserved         0xFC
+ *
+ */
+exports.LQI_TABLE_RESPONSE = 0x8031;
+// Routing Table Request / Response
+/**
+ * Request:  [transaction sequence number: 1] [start index:1]
+ */
+exports.ROUTING_TABLE_REQUEST = 0x0032;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [routing table entries:1] [start index:1]
+ *           [entry count:1] [entry:5]*
+ *   [entry] = [destination address:2]
+ *             [status:1]
+ *             [next hop:2]
+ *
+ *
+ * The status byte has the following fields:
+ *      Name          Mask        Values
+ *
+ *   status           0x07     0x00 active
+ *                             0x01 discovery underway
+ *                             0x02 discovery failed
+ *                             0x03 inactive
+ *                             0x04 validation underway
+ *
+ *   flags            0x38
+ *                             0x08 memory constrained
+ *                             0x10 many-to-one
+ *                             0x20 route record required
+ *
+ *   reserved         0xC0
+ */
+exports.ROUTING_TABLE_RESPONSE = 0x8032;
+// Binding Table Request / Response
+/**
+ * Request:  [transaction sequence number: 1] [start index:1]
+ */
+exports.BINDING_TABLE_REQUEST = 0x0033;
+/**
+ * Response: [transaction sequence number: 1]
+ *           [status:1] [binding table entries:1] [start index:1]
+ *           [entry count:1] [entry:14/21]*
+ *   [entry] = [source EUI64:8] [source endpoint:1] [cluster ID:2]
+ *             [dest addr mode:1] [dest:2/8] [dest endpoint:0/1]
+ * [br]
+ * @note If Dest. Address Mode = 0x03, then the Long Dest. Address will be
+ * used and Dest. endpoint will be included.  If Dest. Address Mode = 0x01,
+ * then the Short Dest. Address will be used and there will be no Dest.
+ * endpoint.
+ */
+exports.BINDING_TABLE_RESPONSE = 0x8033;
+// Leave Request / Response
+/**
+ * Request:  [transaction sequence number: 1] [EUI64:8] [flags:1]
+ *          The flag bits are:
+ *          0x40 remove children
+ *          0x80 rejoin
+ */
+exports.LEAVE_REQUEST = 0x0034;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+exports.LEAVE_RESPONSE = 0x8034;
+// Permit Joining Request / Response
+/**
+ * Request:  [transaction sequence number: 1]
+ *           [duration:1] [permit authentication:1]
+ */
+exports.PERMIT_JOINING_REQUEST = 0x0036;
+/**
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+exports.PERMIT_JOINING_RESPONSE = 0x8036;
+// Network Update Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [scan channels:4] [duration:1] [count:0/1] [manager:0/2]
+ *
+ *   If the duration is in 0x00 ... 0x05, 'count' is present but
+ *   not 'manager'.  Perform 'count' scans of the given duration on the
+ *   given channels.
+ *
+ *   If duration is 0xFE, 'channels' should have a single channel
+ *   and 'count' and 'manager' are not present.  Switch to the indicated
+ *   channel.
+ *
+ *   If duration is 0xFF, 'count' is not present.  Set the active
+ *   channels and the network manager ID to the values given.
+ *
+ *   Unicast requests always get a response, which is INVALID_REQUEST if the
+ *   duration is not a legal value.
+ */
+exports.NWK_UPDATE_REQUEST = 0x0038;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *   [scanned channels:4] [transmissions:2] [failures:2]
+ *   [energy count:1] [energy:1]*
+ */
+exports.NWK_UPDATE_RESPONSE = 0x8038;
+/**
+ *
+ */
+exports.NWK_UPDATE_ENHANCED_REQUEST = 0x0039;
+/**
+ *
+ */
+exports.NWK_UPDATE_ENHANCED_RESPONSE = 0x8039;
+/**
+ *
+ */
+exports.NWK_UPDATE_IEEE_JOINING_LIST_REQUEST = 0x003A;
+/**
+ *
+ */
+exports.NWK_UPDATE_IEEE_JOINING_LIST_REPONSE = 0x803A;
+/**
+ *
+ */
+exports.NWK_UNSOLICITED_ENHANCED_UPDATE_NOTIFY = 0x803B;
+// Beacon Survey Request / Response
+// This command can be used by a remote device to survey the end devices to determine how many potential parents they have access to.
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one Beacon Survey Configuration TLV (variable octets),
+ * which contain the ScanChannelListStructure (variable length)
+ * and the ConfigurationBitmask (1 octet). This information provides
+ * the configuration for the end device's beacon survey.
+ * See R23 spec section 2.4.3.3.12 for the request and 3.2.2.2.1
+ * for the ChannelListStructure.
+ */
+exports.BEACON_SURVEY_REQUEST = 0x003C;
+/**
+ *
+ * Response:  [transaction sequence number: 1]
+ *            [status: 1]
+ *            [TLVs: varies]
+ *
+ * Contains one Beacon Survey Results TLV (4 octets), which contain
+ * the number of on-network, off-network, potential parent and total
+ * beacons recorded. If the device that received the request is not a
+ * router, a Potential Parent TLV (variable octects) will be found. This
+ * will contain information on the device's current parent, as well as
+ * any potential parents found via beacons (up to a maximum of 5). A
+ * Pan ID Conflict TLV can also found in the response.
+ * See R23 spec section 2.4.4.3.13 for the response.
+ */
+exports.BEACON_SURVEY_RESPONSE = 0x803C;
+// Security Start Key Negotiation Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Curve25519 Public Point TLVs (40 octets),
+ * which contain an EUI64 and the 32-byte Curve public point.
+ * See R23 spec section 2.4.3.4.1
+ *
+ * @note This command SHALL NOT be APS encrypted regardless of
+ * whether sent before or after the device joins the network.
+ * This command SHALL be network encrypted if the device has a
+ * network key, i.e. it has joined the network earlier and wants
+ * to negotiate or renegotiate a new link key; otherwise, if it
+ * is used prior to joining the network, it SHALL NOT be network
+ *  encrypted.
+ */
+exports.KEY_NEGOTIATION_REQUEST = 0x0040;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Curve25519 Public Point TLVs (40 octets),
+ * which contain an EUI64 and the 32-byte Curve public point, or
+ * Local TLVs.
+ * See R23 spec section 2.4.4.4.1
+ *
+ * @note This command SHALL NOT be APS encrypted. When performing
+ * Key Negotiation with an unauthenticated neighbor that is not
+ * yet on the network, network layer encryption SHALL NOT be used
+ * on the message. If the message is being sent to unauthenticated
+ * device that is not on the network and is not a neighbor, it
+ * SHALL be relayed as described in section 4.6.3.7.7. Otherwise
+ * the message SHALL have network layer encryption.
+ */
+exports.KEY_NEGOTIATION_RESPONSE = 0x8040;
+// Retrieve Authentication Token Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Authentication Token ID TLVs (1 octet),
+ * which contain the TLV Type Tag ID of the source of the
+ * authentication token. See R23 spec section 2.4.3.4.2
+ */
+exports.AUTHENTICATION_TOKEN_REQUEST = 0x0041;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more 128-bit Symmetric Passphrase Global TLVs
+ * (16 octets), which contain the symmetric passphrase authentication
+ * token. See R23 spec section 2.4.4.4.2
+ */
+exports.AUTHENTICATION_TOKEN_RESPONSE = 0x8041;
+// Retrieve Authentication Level Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Target IEEE Address TLVs (8 octets),
+ * which contain the EUI64 of the device of interest.
+ * See R23 spec section 2.4.3.4.3
+ */
+exports.AUTHENTICATION_LEVEL_REQUEST = 0x0042;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Device Authentication Level TLVs
+ * (10 octets), which contain the EUI64 of the inquired device,
+ * along with the its initial join method and its active link
+ * key update method.
+ * See R23 spec section 2.4.4.4.3
+ */
+exports.AUTHENTICATION_LEVEL_RESPONSE = 0x8042;
+// Set Configuration Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more Global TLVs (1 octet),
+ * which contain the TLV Type Tag ID, and their
+ * value.
+ */
+exports.SET_CONFIGURATION_REQUEST = 0x0043;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+exports.SET_CONFIGURATION_RESPONSE = 0x8043;
+// Get Configuration Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more TLVs (1 octet),
+ * which the sender wants to get information
+ */
+exports.GET_CONFIGURATION_REQUEST = 0x0044;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more TLV tag Ids and their values
+ * in response to the request
+ */
+exports.GET_CONFIGURATION_RESPONSE = 0x8044;
+// Security Start Key Update Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains one or more TLVs. These TLVs can be Selected Key
+ * Negotiation Method TLVs (10 octets), Fragmentation Parameters
+ * Global TLVs (5 octets), or other TLVs.
+ * See R23 spec section 2.4.3.4.6
+ *
+ * @note This SHALL NOT be APS encrypted or NWK encrypted if the
+ * link key update mechanism is done as part of the initial join
+ * and before the receiving device has been issued a network
+ * key. This SHALL be both APS encrypted and NWK encrypted if
+ * the link key update mechanism is performed to refresh the
+ * link key when the receiving device has the network key and
+ * has previously successfully joined the network.
+ */
+exports.KEY_UPDATE_REQUEST = 0x0045;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ *
+ * See R23 spec section 2.4.4.4.6
+ *
+ * @note This command SHALL be APS encrypted.
+ */
+exports.KEY_UPDATE_RESPONSE = 0x8045;
+// Security Decommission Request / Response
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [security decommission request EUI64 TLV:Variable]
+ * Security Decommission request EUI64 TLV:
+ *           [Count N:1][EUI64 1:8]...[EUI64 N:8]
+ */
+exports.SECURITY_DECOMMISSION_REQUEST = 0x0046;
+/**
+ *
+ * Response: [transaction sequence number: 1] [status:1]
+ */
+exports.SECURITY_DECOMMISSION_RESPONSE = 0x8046;
+// Challenge for APS frame counter synchronization
+/**
+ *
+ * Request:  [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains at least the APS Frame Counter Challenge TLV, which holds the
+ * sender EUI and the 64 bit challenge value.
+ */
+exports.SECURITY_CHALLENGE_REQUEST = 0x0047;
+/**
+ *
+ * Response: [transaction sequence number: 1]
+ *           [TLVs: varies]
+ *
+ * Contains at least the APS Frame Counter Response TLV, which holds the
+ * sender EUI, received challenge value, APS frame counter, challenge
+ * security frame counter, and 8-byte MIC.
+ */
+exports.SECURITY_CHALLENGE_RESPONSE = 0x8047;
+// Unsupported Not mandatory and not supported.
+/**
+ *
+ */
+exports.COMPLEX_DESCRIPTOR_REQUEST = 0x0010;
+/**
+ *
+ */
+exports.COMPLEX_DESCRIPTOR_RESPONSE = 0x8010;
+/**
+ *
+ */
+exports.USER_DESCRIPTOR_REQUEST = 0x0011;
+/**
+ *
+ */
+exports.USER_DESCRIPTOR_RESPONSE = 0x8011;
+/**
+ *
+ */
+exports.DISCOVERY_REGISTER_REQUEST = 0x0012;
+/**
+ *
+ */
+exports.DISCOVERY_REGISTER_RESPONSE = 0x8012;
+/**
+ *
+ */
+exports.USER_DESCRIPTOR_SET = 0x0014;
+/**
+ *
+ */
+exports.USER_DESCRIPTOR_CONFIRM = 0x8014;
+/**
+ *
+ */
+exports.NETWORK_DISCOVERY_REQUEST = 0x0030;
+/**
+ *
+ */
+exports.NETWORK_DISCOVERY_RESPONSE = 0x8030;
+/**
+ *
+ */
+exports.DIRECT_JOIN_REQUEST = 0x0035;
+/**
+ *
+ */
+exports.DIRECT_JOIN_RESPONSE = 0x8035;
+// Discovery Cache Request / Response
+// DEPRECATED
+/**
+ * Response: [transaction sequence number: 1]
+ *            [status (== EMBER_ZDP_SUCCESS):1]
+ */
+exports.DISCOVERY_CACHE_REQUEST = 0x0012;
+/**
+ * Request:  [transaction sequence number: 1]
+ *            [source node ID:2] [source EUI64:8]
+ */
+exports.DISCOVERY_CACHE_RESPONSE = 0x8012;
+exports.CLUSTER_ID_RESPONSE_MINIMUM = 0x8000;
+//# sourceMappingURL=zdo.js.map