@willieee802/zigbee-herdsman-converters 15.0.8-4.1

package/devices/stelpro.js

@@ -0,0 +1,216 @@
+const exposes = require('../lib/exposes');
+const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee};
+const tz = require('../converters/toZigbee');
+const reporting = require('../lib/reporting');
+const e = exposes.presets;
+const constants = require('../lib/constants');
+
+const fzLocal = {
+    power: {
+        cluster: 'hvacThermostat',
+        type: ['attributeReport', 'readResponse'],
+        convert: (model, msg, publish, options, meta) => {
+            if (msg.data.hasOwnProperty('16392')) {
+                return {power: msg.data['16392']};
+            }
+        },
+    },
+    energy: {
+        cluster: 'hvacThermostat',
+        type: ['attributeReport', 'readResponse'],
+        convert: (model, msg, publish, options, meta) => {
+            if (msg.data.hasOwnProperty('16393')) {
+                return {energy: parseFloat(msg.data['16393']) / 1000};
+            }
+        },
+    },
+};
+
+module.exports = [
+    {
+        zigbeeModel: ['HT402'],
+        model: 'HT402',
+        vendor: 'Stelpro',
+        description: 'Hilo thermostat',
+        fromZigbee: [fz.stelpro_thermostat, fz.hvac_user_interface, fzLocal.power, fzLocal.energy],
+        toZigbee: [tz.thermostat_local_temperature, tz.thermostat_occupancy, tz.thermostat_occupied_heating_setpoint,
+            tz.thermostat_temperature_display_mode, tz.thermostat_keypad_lockout, tz.thermostat_system_mode,
+            tz.thermostat_running_state, tz.stelpro_thermostat_outdoor_temperature],
+        exposes: [e.local_temperature(), e.keypad_lockout(), e.power(), e.energy(),
+            exposes.climate().withSetpoint('occupied_heating_setpoint', 5, 30, 0.5).withLocalTemperature()
+                .withSystemMode(['heat']).withRunningState(['idle', 'heat'])],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(25);
+            const binds = ['genBasic', 'genIdentify', 'genGroups', 'hvacThermostat', 'hvacUserInterfaceCfg', 'msTemperatureMeasurement'];
+            await reporting.bind(endpoint, coordinatorEndpoint, binds);
+            await reporting.thermostatTemperature(endpoint);
+            await reporting.thermostatOccupiedHeatingSetpoint(endpoint);
+            await reporting.thermostatSystemMode(endpoint);
+            await reporting.thermostatPIHeatingDemand(endpoint);
+            await reporting.thermostatKeypadLockMode(endpoint);
+            // Has Unknown power source, force it.
+            device.powerSource = 'Mains (single phase)';
+            device.save();
+        },
+    },
+    {
+        zigbeeModel: ['ST218'],
+        model: 'ST218',
+        vendor: 'Stelpro',
+        description: 'Ki convector, line-voltage thermostat',
+        fromZigbee: [fz.legacy.stelpro_thermostat, fz.legacy.hvac_user_interface],
+        toZigbee: [tz.thermostat_local_temperature, tz.thermostat_occupancy, tz.thermostat_occupied_heating_setpoint,
+            tz.thermostat_temperature_display_mode, tz.thermostat_keypad_lockout, tz.thermostat_system_mode, tz.thermostat_running_state,
+            tz.stelpro_thermostat_outdoor_temperature],
+        exposes: [e.local_temperature(), e.keypad_lockout(),
+            exposes.climate().withSetpoint('occupied_heating_setpoint', 5, 30, 0.5).withLocalTemperature()
+                .withSystemMode(['off', 'auto', 'heat']).withRunningState(['idle', 'heat']).withPiHeatingDemand()],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(25);
+            const binds = ['genBasic', 'genIdentify', 'genGroups', 'hvacThermostat', 'hvacUserInterfaceCfg', 'msTemperatureMeasurement'];
+            await reporting.bind(endpoint, coordinatorEndpoint, binds);
+
+            // Those exact parameters (min/max/change) are required for reporting to work with Stelpro Ki
+            await reporting.thermostatTemperature(endpoint);
+            await reporting.thermostatOccupiedHeatingSetpoint(endpoint);
+            await reporting.thermostatSystemMode(endpoint);
+            await reporting.thermostatPIHeatingDemand(endpoint);
+            await reporting.thermostatKeypadLockMode(endpoint);
+            // cluster 0x0201 attribute 0x401c
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: 'StelproSystemMode',
+                minimumReportInterval: constants.repInterval.MINUTE,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 1,
+            }]);
+        },
+    },
+    {
+        zigbeeModel: ['STZB402+', 'STZB402'],
+        model: 'STZB402',
+        vendor: 'Stelpro',
+        description: 'Ki, line-voltage thermostat',
+        fromZigbee: [fz.legacy.stelpro_thermostat, fz.legacy.hvac_user_interface, fz.humidity],
+        toZigbee: [tz.thermostat_local_temperature, tz.thermostat_occupancy, tz.thermostat_occupied_heating_setpoint,
+            tz.thermostat_temperature_display_mode, tz.thermostat_keypad_lockout, tz.thermostat_system_mode,
+            tz.thermostat_running_state, tz.stelpro_thermostat_outdoor_temperature],
+        exposes: [e.local_temperature(), e.keypad_lockout(), e.humidity(),
+            exposes.climate().withSetpoint('occupied_heating_setpoint', 5, 30, 0.5).withLocalTemperature()
+                .withSystemMode(['off', 'auto', 'heat']).withRunningState(['idle', 'heat'])],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(25);
+            const binds = ['genBasic', 'genIdentify', 'genGroups', 'hvacThermostat', 'hvacUserInterfaceCfg', 'msTemperatureMeasurement'];
+            await reporting.bind(endpoint, coordinatorEndpoint, binds);
+
+            // Those exact parameters (min/max/change) are required for reporting to work with Stelpro Ki
+            await reporting.thermostatTemperature(endpoint);
+            await reporting.thermostatOccupiedHeatingSetpoint(endpoint);
+            await reporting.thermostatSystemMode(endpoint);
+            await reporting.thermostatPIHeatingDemand(endpoint);
+            await reporting.thermostatKeypadLockMode(endpoint);
+            // cluster 0x0201 attribute 0x401c
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: 'StelproSystemMode',
+                minimumReportInterval: constants.repInterval.MINUTE,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 1,
+            }]);
+        },
+    },
+    {
+        zigbeeModel: ['MaestroStat'],
+        model: 'SMT402',
+        vendor: 'Stelpro',
+        description: 'Maestro, line-voltage thermostat',
+        fromZigbee: [fz.legacy.stelpro_thermostat, fz.legacy.hvac_user_interface, fz.humidity],
+        toZigbee: [tz.thermostat_local_temperature, tz.thermostat_occupancy, tz.thermostat_occupied_heating_setpoint,
+            tz.thermostat_temperature_display_mode, tz.thermostat_keypad_lockout, tz.thermostat_system_mode, tz.thermostat_running_state,
+            tz.stelpro_thermostat_outdoor_temperature],
+        exposes: [e.local_temperature(), e.keypad_lockout(), e.humidity(),
+            exposes.climate().withSetpoint('occupied_heating_setpoint', 5, 30, 0.5).withLocalTemperature()
+                .withSystemMode(['off', 'auto', 'heat']).withRunningState(['idle', 'heat'])],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(25);
+            const binds = ['genBasic', 'genIdentify', 'genGroups', 'hvacThermostat', 'hvacUserInterfaceCfg', 'msRelativeHumidity',
+                'msTemperatureMeasurement'];
+            await reporting.bind(endpoint, coordinatorEndpoint, binds);
+
+            // Those exact parameters (min/max/change) are required for reporting to work with Stelpro Maestro
+            await reporting.thermostatTemperature(endpoint);
+            await reporting.humidity(endpoint);
+            await reporting.thermostatOccupiedHeatingSetpoint(endpoint);
+            await reporting.thermostatSystemMode(endpoint);
+            await reporting.thermostatPIHeatingDemand(endpoint);
+            await reporting.thermostatKeypadLockMode(endpoint);
+            // cluster 0x0201 attribute 0x401c
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: 'StelproSystemMode',
+                minimumReportInterval: constants.repInterval.MINUTE,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 1}]);
+        },
+    },
+    {
+        zigbeeModel: ['SORB'],
+        model: 'SORB',
+        vendor: 'Stelpro',
+        description: 'ORLÉANS fan heater',
+        fromZigbee: [fz.stelpro_thermostat, fz.hvac_user_interface],
+        toZigbee: [tz.thermostat_local_temperature, tz.thermostat_occupied_heating_setpoint,
+            tz.thermostat_temperature_display_mode, tz.thermostat_keypad_lockout, tz.thermostat_system_mode, tz.thermostat_running_state],
+        exposes: [e.local_temperature(), e.keypad_lockout(),
+            exposes.climate().withSetpoint('occupied_heating_setpoint', 5, 30, 0.5).withLocalTemperature()
+                .withSystemMode(['off', 'auto', 'heat']).withRunningState(['idle', 'heat'])],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(25);
+            const binds = ['genBasic', 'genIdentify', 'genGroups', 'hvacThermostat', 'hvacUserInterfaceCfg', 'msTemperatureMeasurement'];
+            await reporting.bind(endpoint, coordinatorEndpoint, binds);
+
+            // Those exact parameters (min/max/change) are required for reporting to work with Stelpro SORB
+            await reporting.thermostatTemperature(endpoint);
+            await reporting.thermostatOccupiedHeatingSetpoint(endpoint);
+            await reporting.thermostatSystemMode(endpoint);
+            await reporting.thermostatPIHeatingDemand(endpoint);
+            await reporting.thermostatKeypadLockMode(endpoint);
+            // cluster 0x0201 attribute 0x401c
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: 'StelproSystemMode',
+                minimumReportInterval: constants.repInterval.MINUTE,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 1}]);
+        },
+    },
+    {
+        zigbeeModel: ['SMT402AD'],
+        model: 'SMT402AD',
+        vendor: 'Stelpro',
+        description: 'Maestro, line-voltage thermostat',
+        fromZigbee: [fz.legacy.stelpro_thermostat, fz.legacy.hvac_user_interface, fz.humidity],
+        toZigbee: [tz.thermostat_local_temperature, tz.thermostat_occupancy, tz.thermostat_occupied_heating_setpoint,
+            tz.thermostat_temperature_display_mode, tz.thermostat_keypad_lockout, tz.thermostat_system_mode, tz.thermostat_running_state,
+            tz.stelpro_thermostat_outdoor_temperature],
+        exposes: [e.local_temperature(), e.keypad_lockout(), e.humidity(),
+            exposes.climate().withSetpoint('occupied_heating_setpoint', 5, 30, 0.5).withLocalTemperature()
+                .withSystemMode(['off', 'auto', 'heat']).withRunningState(['idle', 'heat'])],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(25);
+            const binds = ['genBasic', 'genIdentify', 'genGroups', 'hvacThermostat', 'hvacUserInterfaceCfg', 'msRelativeHumidity',
+                'msTemperatureMeasurement'];
+            await reporting.bind(endpoint, coordinatorEndpoint, binds);
+
+            // Those exact parameters (min/max/change) are required for reporting to work with Stelpro Maestro
+            await reporting.thermostatTemperature(endpoint);
+            await reporting.humidity(endpoint);
+            await reporting.thermostatOccupiedHeatingSetpoint(endpoint);
+            await reporting.thermostatSystemMode(endpoint);
+            await reporting.thermostatPIHeatingDemand(endpoint);
+            await reporting.thermostatKeypadLockMode(endpoint);
+            // cluster 0x0201 attribute 0x401c
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: 'StelproSystemMode',
+                minimumReportInterval: constants.repInterval.MINUTE,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 1}]);
+        },
+    },
+];