@willieee802/zigbee-herdsman-converters 15.0.8-4.1

package/devices/smartthings.js

@@ -0,0 +1,495 @@
+const exposes = require('../lib/exposes');
+const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee};
+const tz = require('../converters/toZigbee');
+const constants = require('../lib/constants');
+const reporting = require('../lib/reporting');
+const extend = require('../lib/extend');
+const e = exposes.presets;
+const ea = exposes.access;
+
+module.exports = [
+    {
+        zigbeeModel: ['PGC313'],
+        model: 'STSS-MULT-001',
+        vendor: 'SmartThings',
+        description: 'Multipurpose sensor',
+        fromZigbee: [fz.ias_contact_alarm_1],
+        toZigbee: [],
+        exposes: [e.contact(), e.battery_low(), e.tamper()],
+    },
+    {
+        zigbeeModel: ['PGC314'],
+        model: 'STSS-IRM-001',
+        vendor: 'SmartThings',
+        description: 'Motion sensor (2013 model)',
+        fromZigbee: [fz.ias_occupancy_alarm_1],
+        toZigbee: [],
+        exposes: [e.occupancy(), e.battery_low(), e.tamper()],
+    },
+    {
+        zigbeeModel: ['tagv4'],
+        model: 'STS-PRS-251',
+        vendor: 'SmartThings',
+        description: 'Arrival sensor',
+        fromZigbee: [fz.STS_PRS_251_presence, fz.battery, fz.legacy.STS_PRS_251_beeping],
+        exposes: [e.battery(), e.presence(), e.action(['beeping']),
+            exposes.enum('beep', ea.SET, ['2', '5', '10', '15', '30']).withDescription('Trigger beep for x seconds')],
+        toZigbee: [tz.STS_PRS_251_beep],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg', 'genBinaryInput']);
+            await reporting.batteryVoltage(endpoint);
+            await reporting.presentValue(endpoint);
+        },
+    },
+    {
+        zigbeeModel: ['PGC410EU', 'PGC410'],
+        model: 'STSS-PRES-001',
+        vendor: 'SmartThings',
+        description: 'Presence sensor',
+        fromZigbee: [fz.PGC410EU_presence, fz.battery],
+        exposes: [e.battery(), e.presence()],
+        toZigbee: [],
+    },
+    {
+        zigbeeModel: ['3325-S'],
+        model: '3325-S',
+        vendor: 'SmartThings',
+        description: 'Motion sensor (2015 model)',
+        fromZigbee: [fz.temperature, fz.ias_occupancy_alarm_2, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2100'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+        exposes: [e.temperature(), e.occupancy(), e.battery(), e.tamper()],
+    },
+    {
+        zigbeeModel: ['3321-S'],
+        model: '3321-S',
+        vendor: 'SmartThings',
+        description: 'Multi Sensor (2015 model)',
+        fromZigbee: [fz.temperature, fz.ias_contact_alarm_1_report, fz.ias_contact_alarm_1, fz.battery, fz.smartthings_acceleration],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2100'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            const options = {manufacturerCode: 0x104E};
+            await reporting.bind(endpoint, coordinatorEndpoint,
+                ['msTemperatureMeasurement', 'genPowerCfg', 'manuSpecificSamsungAccelerometer']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+            const payloadA = reporting.payload('acceleration', 10, constants.repInterval.MINUTE, 1);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadA, options);
+            const payloadX = reporting.payload('x_axis', 10, constants.repInterval.MINUTE, 1);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadX, options);
+            const payloadY = reporting.payload('y_axis', 10, constants.repInterval.MINUTE, 1);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadY, options);
+            const payloadZ = reporting.payload('z_axis', 10, constants.repInterval.MINUTE, 1);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadZ, options);
+            // Has Unknown power source, force it.
+            device.powerSource = 'Battery';
+            device.save();
+        },
+        exposes: [e.temperature(), e.contact(), e.battery_low(), e.tamper(), e.battery(),
+            e.moving(), e.x_axis(), e.y_axis(), e.z_axis()],
+    },
+    {
+        zigbeeModel: ['3200-Sgb'],
+        model: 'F-APP-UK-V2',
+        vendor: 'SmartThings',
+        description: 'Zigbee Outlet UK with power meter',
+        fromZigbee: [fz.on_off, fz.electrical_measurement],
+        toZigbee: [tz.on_off],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'haElectricalMeasurement']);
+            await reporting.onOff(endpoint);
+            // Does not support reading of acVoltageMultiplier/acVoltageDivisor
+            await endpoint.read('haElectricalMeasurement', ['acCurrentMultiplier', 'acCurrentDivisor']);
+            await endpoint.read('haElectricalMeasurement', ['acPowerMultiplier', 'acPowerDivisor']);
+            // Limit updates to 3V and max 600s (10m)
+            await reporting.rmsVoltage(endpoint, {max: 600, change: 3});
+            // Limit updates to 0.01A and max 600s (10m)
+            await reporting.rmsCurrent(endpoint, {max: 600, change: 10});
+            // Limit updates to 4.0W and max 600s (10m)
+            await reporting.activePower(endpoint, {max: 600, change: 40});
+        },
+        exposes: [e.switch(), e.power(), e.current(), e.voltage()],
+    },
+    {
+        zigbeeModel: ['ZB-ONOFFPlug-D0005'],
+        model: 'GP-WOU019BBDWG',
+        vendor: 'SmartThings',
+        description: 'Outlet with power meter',
+        extend: extend.switch({fromZigbee: [fz.electrical_measurement, fz.metering], exposes: [e.power(), e.energy()]}),
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'haElectricalMeasurement', 'seMetering']);
+            await reporting.onOff(endpoint);
+            // This plug only actively reports power. The voltage and current values are always 0, so we can ignore them.
+            // https://github.com/Koenkk/zigbee2mqtt/issues/5198
+            await endpoint.read('haElectricalMeasurement', ['acPowerMultiplier', 'acPowerDivisor']);
+            await reporting.activePower(endpoint);
+            await reporting.readMeteringMultiplierDivisor(endpoint);
+            await reporting.currentSummDelivered(endpoint);
+        },
+    },
+    {
+        zigbeeModel: ['outlet'],
+        model: 'IM6001-OTP05',
+        vendor: 'SmartThings',
+        description: 'Outlet',
+        fromZigbee: [fz.on_off, fz.electrical_measurement],
+        toZigbee: [tz.on_off],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'haElectricalMeasurement']);
+            await reporting.onOff(endpoint);
+            await reporting.readEletricalMeasurementMultiplierDivisors(endpoint);
+            await reporting.activePower(endpoint);
+            await reporting.rmsCurrent(endpoint);
+            await reporting.rmsVoltage(endpoint);
+        },
+        exposes: [e.switch(), e.power(), e.current(), e.voltage()],
+    },
+    {
+        zigbeeModel: ['outletv4'],
+        model: 'STS-OUT-US-2',
+        vendor: 'SmartThings',
+        description: 'Zigbee smart plug with power meter',
+        fromZigbee: [fz.on_off, fz.electrical_measurement],
+        toZigbee: [tz.on_off],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'haElectricalMeasurement']);
+            await reporting.onOff(endpoint);
+            try {
+                // https://github.com/Koenkk/zigbee2mqtt/issues/11706
+                await reporting.readEletricalMeasurementMultiplierDivisors(endpoint);
+            } catch (error) {/* Fails for some*/}
+            await reporting.activePower(endpoint);
+            await reporting.rmsCurrent(endpoint);
+            await reporting.rmsVoltage(endpoint, {change: 10});
+        },
+        exposes: [e.switch(), e.power(), e.current(), e.voltage()],
+    },
+    {
+        zigbeeModel: ['motion'],
+        model: 'IM6001-MTP01',
+        vendor: 'SmartThings',
+        description: 'Motion sensor (2018 model)',
+        fromZigbee: [fz.temperature, fz.ignore_iaszone_report, fz.ias_occupancy_alarm_1, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+        exposes: [e.temperature(), e.occupancy(), e.battery_low(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['motionv5'],
+        model: 'STS-IRM-251',
+        vendor: 'SmartThings',
+        description: 'Motion sensor (2017 model)',
+        fromZigbee: [fz.temperature, fz.ias_occupancy_alarm_1, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+            device.powerSource = 'Battery';
+            device.save();
+        },
+        exposes: [e.temperature(), e.occupancy(), e.battery_low(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['motionv4'],
+        model: 'STS-IRM-250',
+        vendor: 'SmartThings',
+        description: 'Motion sensor (2016 model)',
+        fromZigbee: [fz.temperature, fz.ias_occupancy_alarm_2, fz.ias_occupancy_alarm_1, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_1500_2800'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+            // Has Unknown power source, force it.
+            device.powerSource = 'Battery';
+            device.save();
+        },
+        exposes: [e.temperature(), e.occupancy(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['3305-S', '3305'],
+        model: '3305-S',
+        vendor: 'SmartThings',
+        description: 'Motion sensor (2014 model)',
+        fromZigbee: [fz.temperature, fz.ias_occupancy_alarm_2, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+        exposes: [e.temperature(), e.occupancy(), e.battery_low(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['3300-S'],
+        model: '3300-S',
+        vendor: 'SmartThings',
+        description: 'Door sensor',
+        fromZigbee: [fz.temperature, fz.ias_contact_alarm_1_report, fz.ias_contact_alarm_1, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+        exposes: [e.temperature(), e.contact(), e.battery_low(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['multiv4'],
+        model: 'F-MLT-US-2',
+        vendor: 'SmartThings',
+        description: 'Multipurpose sensor (2016 model)',
+        fromZigbee: [fz.temperature, fz.battery, fz.ias_contact_alarm_1, fz.smartthings_acceleration],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_1500_2800'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            const options = {manufacturerCode: 0x110A};
+            await reporting.bind(endpoint, coordinatorEndpoint,
+                ['msTemperatureMeasurement', 'genPowerCfg', 'manuSpecificSamsungAccelerometer']);
+            await endpoint.write('manuSpecificSamsungAccelerometer', {0x0000: {value: 0x01, type: 0x20}}, options);
+            await endpoint.write('manuSpecificSamsungAccelerometer', {0x0002: {value: 0x0276, type: 0x21}}, options);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+            const payloadA = reporting.payload('acceleration', 10, constants.repInterval.MINUTE, 1);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadA, options);
+            const payloadX = reporting.payload('x_axis', 10, constants.repInterval.MINUTE, 1);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadX, options);
+            const payloadY = reporting.payload('y_axis', 10, constants.repInterval.MINUTE, 1);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadY, options);
+            const payloadZ = reporting.payload('z_axis', 10, constants.repInterval.MINUTE, 1);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadZ, options);
+            // Has Unknown power source, force it.
+            device.powerSource = 'Battery';
+            device.save();
+        },
+        exposes: [
+            e.temperature(), e.contact(), e.battery_low(), e.tamper(), e.battery(),
+            e.moving(), e.x_axis(), e.y_axis(), e.z_axis(),
+        ],
+    },
+    {
+        zigbeeModel: ['multi'],
+        model: 'IM6001-MPP01',
+        vendor: 'SmartThings',
+        description: 'Multipurpose sensor (2018 model)',
+        fromZigbee: [fz.temperature, fz.battery, fz.ias_contact_alarm_1, fz.smartthings_acceleration],
+        toZigbee: [],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            const options = {manufacturerCode: 0x1241};
+            await reporting.bind(endpoint, coordinatorEndpoint,
+                ['msTemperatureMeasurement', 'genPowerCfg', 'manuSpecificSamsungAccelerometer']);
+            await endpoint.write('manuSpecificSamsungAccelerometer', {0x0000: {value: 0x14, type: 0x20}}, options);
+            await reporting.temperature(endpoint);
+            await reporting.batteryPercentageRemaining(endpoint);
+            const payloadA = reporting.payload('acceleration', 10, constants.repInterval.HOUR, 5);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadA, options);
+            const payloadX = reporting.payload('x_axis', 10, constants.repInterval.HOUR, 5);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadX, options);
+            const payloadY = reporting.payload('y_axis', 10, constants.repInterval.HOUR, 5);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadY, options);
+            const payloadZ = reporting.payload('z_axis', 10, constants.repInterval.HOUR, 5);
+            await endpoint.configureReporting('manuSpecificSamsungAccelerometer', payloadZ, options);
+        },
+        exposes: [
+            e.temperature(), e.contact(), e.battery_low(), e.tamper(), e.battery(),
+            e.moving(), e.x_axis(), e.y_axis(), e.z_axis(),
+        ],
+    },
+    {
+        zigbeeModel: ['3310-S'],
+        model: '3310-S',
+        vendor: 'SmartThings',
+        description: 'Temperature and humidity sensor',
+        fromZigbee: [fz.temperature, fz._3310_humidity, fz.battery],
+        exposes: [e.temperature(), e.humidity(), e.battery()],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            const binds = ['msTemperatureMeasurement', 'manuSpecificCentraliteHumidity', 'genPowerCfg'];
+            await reporting.bind(endpoint, coordinatorEndpoint, binds);
+            await reporting.temperature(endpoint);
+
+            const payload = [{
+                attribute: 'measuredValue',
+                minimumReportInterval: 10,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 10,
+            }];
+            await endpoint.configureReporting('manuSpecificCentraliteHumidity', payload, {manufacturerCode: 0x104E});
+
+            await reporting.batteryVoltage(endpoint);
+        },
+    },
+    {
+        zigbeeModel: ['3315-S'],
+        model: '3315-S',
+        vendor: 'SmartThings',
+        description: 'Water sensor',
+        fromZigbee: [fz.temperature, fz.ias_water_leak_alarm_1, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+        exposes: [e.temperature(), e.water_leak(), e.battery_low(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['3315-Seu'],
+        model: 'WTR-UK-V2',
+        vendor: 'SmartThings',
+        description: 'Water leak sensor (2015 model)',
+        fromZigbee: [fz.temperature, fz.ias_water_leak_alarm_1, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+        exposes: [e.temperature(), e.water_leak(), e.battery_low(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['water'],
+        model: 'IM6001-WLP01',
+        vendor: 'SmartThings',
+        description: 'Water leak sensor (2018 model)',
+        fromZigbee: [fz.temperature, fz.ias_water_leak_alarm_1, fz.battery, fz.ias_water_leak_alarm_1_report],
+        toZigbee: [],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryPercentageRemaining(endpoint);
+        },
+        exposes: [e.temperature(), e.water_leak(), e.battery_low(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['moisturev4'],
+        model: 'STS-WTR-250',
+        vendor: 'SmartThings',
+        description: 'Water leak sensor (2016 model)',
+        fromZigbee: [fz.ias_water_leak_alarm_1, fz.battery, fz.temperature],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg', 'msTemperatureMeasurement']);
+            await reporting.batteryVoltage(endpoint);
+            await reporting.temperature(endpoint);
+            device.powerSource = 'Battery';
+            device.save();
+        },
+        exposes: [e.water_leak(), e.battery_low(), e.tamper(), e.battery(), e.temperature()],
+    },
+    {
+        zigbeeModel: ['3315-G'],
+        model: '3315-G',
+        vendor: 'SmartThings',
+        description: 'Water sensor',
+        fromZigbee: [fz.temperature, fz.ias_water_leak_alarm_1, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+        exposes: [e.temperature(), e.water_leak(), e.battery_low(), e.tamper(), e.battery()],
+    },
+    {
+        zigbeeModel: ['F-ADT-WTR-1'],
+        model: 'F-ADT-WTR-1',
+        vendor: 'SmartThings',
+        description: 'ADT water leak detector',
+        fromZigbee: [fz.temperature, fz.ias_water_leak_alarm_1, fz.battery],
+        toZigbee: [],
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+        exposes: [e.temperature(), e.water_leak(), e.battery_low(), e.battery()],
+    },
+    {
+        zigbeeModel: ['button'],
+        model: 'IM6001-BTP01',
+        vendor: 'SmartThings',
+        description: 'Button',
+        fromZigbee: [fz.command_status_change_notification_action, fz.legacy.st_button_state, fz.battery, fz.temperature,
+            fz.ignore_iaszone_attreport],
+        exposes: [e.action(['off', 'single', 'double', 'hold']), e.battery(), e.temperature()],
+        toZigbee: [],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msTemperatureMeasurement', 'genPowerCfg']);
+            await reporting.temperature(endpoint);
+            await reporting.batteryVoltage(endpoint);
+        },
+    },
+    {
+        zigbeeModel: ['Z-SRN12N', 'SZ-SRN12N'],
+        model: 'SZ-SRN12N',
+        vendor: 'SmartThings',
+        description: 'Smart siren',
+        fromZigbee: [],
+        toZigbee: [tz.warning],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg']);
+        },
+        exposes: [e.warning()],
+    },
+    {
+        zigbeeModel: ['zbt-dimlight-gls0006'],
+        model: 'GP-LBU019BBAWU',
+        vendor: 'SmartThings',
+        description: 'Smart bulb',
+        extend: extend.light_onoff_brightness(),
+    },
+    {
+        zigbeeModel: ['ZBT-DIMLight-GLS0044'],
+        model: '7ZA-A806ST-Q1R',
+        vendor: 'SmartThings',
+        description: 'Smart bulb',
+        extend: extend.light_onoff_brightness(),
+    },
+];

package/devices/smartwings.js

@@ -0,0 +1,24 @@
+const exposes = require('../lib/exposes');
+const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee};
+const tz = require('../converters/toZigbee');
+const reporting = require('../lib/reporting');
+const e = exposes.presets;
+
+module.exports = [
+    {
+        zigbeeModel: ['WM25/L-Z'],
+        model: 'WM25L-Z',
+        vendor: 'Smartwings',
+        description: 'Roller shade',
+        fromZigbee: [fz.cover_position_tilt, fz.battery],
+        toZigbee: [tz.cover_state, tz.cover_position_tilt],
+        meta: {battery: {dontDividePercentage: true}, coverInverted: true},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg', 'closuresWindowCovering']);
+            device.powerSource = 'Mains (single phase)';
+            device.save();
+        },
+        exposes: [e.cover_position(), e.battery()],
+    },
+];

package/devices/sohan_electric.js

@@ -0,0 +1,13 @@
+const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee};
+const extend = require('../lib/extend');
+
+module.exports = [
+    {
+        fingerprint: [{modelID: 'TS0001', manufacturerName: '_TZ3000_bezfthwc'}],
+        model: 'RDCBC/Z',
+        vendor: 'SOHAN Electric',
+        description: 'DIN circuit breaker (1 pole / 2 poles)',
+        extend: extend.switch(),
+        fromZigbee: [fz.on_off, fz.ignore_basic_report, fz.ignore_time_read],
+    },
+];

package/devices/solaredge.js

@@ -0,0 +1,11 @@
+const extend = require('../lib/extend');
+
+module.exports = [
+    {
+        zigbeeModel: ['SE-SW'],
+        model: 'SEHAZB-DR-SWITCH-2',
+        vendor: 'SolarEdge',
+        description: 'Smart energy switch',
+        extend: extend.switch(),
+    },
+];

package/devices/somgoms.js

@@ -0,0 +1,47 @@
+const exposes = require('../lib/exposes');
+const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee};
+const tz = require('../converters/toZigbee');
+const extend = require('../lib/extend');
+const e = exposes.presets;
+const ea = exposes.access;
+
+module.exports = [
+    {
+        zigbeeModel: ['tdtqgwv'],
+        model: 'ZSTY-SM-11ZG-US-W',
+        vendor: 'Somgoms',
+        description: '1 gang switch',
+        extend: extend.switch(),
+        exposes: [e.switch().setAccess('state', ea.STATE_SET)],
+        fromZigbee: [fz.tuya_switch, fz.ignore_time_read, fz.ignore_basic_report],
+        toZigbee: [tz.tuya_switch_state],
+    },
+    {
+        zigbeeModel: ['bordckq'],
+        model: 'ZSTY-SM-1CTZG-US-W',
+        vendor: 'Somgoms',
+        description: 'Curtain switch',
+        fromZigbee: [fz.tuya_cover, fz.ignore_basic_report],
+        toZigbee: [tz.tuya_cover_control, tz.tuya_cover_options],
+        exposes: [e.cover_position().setAccess('position', ea.STATE_SET)],
+    },
+    {
+        fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_sbordckq'}],
+        model: 'SM-1CTW-EU',
+        vendor: 'Somgoms',
+        description: 'Curtain switch',
+        fromZigbee: [fz.tuya_cover, fz.ignore_basic_report],
+        toZigbee: [tz.tuya_cover_control, tz.tuya_cover_options],
+        exposes: [e.cover_position().setAccess('position', ea.STATE_SET)],
+    },
+    {
+        zigbeeModel: ['hpb9yts'],
+        model: 'ZSTY-SM-1DMZG-US-W',
+        vendor: 'Somgoms',
+        description: 'Dimmer switch',
+        fromZigbee: [fz.tuya_dimmer, fz.ignore_basic_report],
+        toZigbee: [tz.tuya_dimmer_state, tz.tuya_dimmer_level],
+        exposes: [e.light_brightness().setAccess('state', ea.STATE_SET).setAccess('brightness', ea.STATE_SET)],
+        extend: extend.light_onoff_brightness(),
+    },
+];