@tyvm/knowhow 0.0.159 → 0.0.160

package/autodoc/generate-guide.md

@@ -1,437 +0,0 @@
-# `knowhow generate` Guide
-
-`knowhow generate` is Knowhow’s “code-to-documents” generator. It reads your `sources` from `.knowhow/knowhow.json`, resolves prompts, runs AI summarization (or plugin handlers), and writes output files (or sets of files) to your configured `output` paths.
-
----
-
-## 1) What `knowhow generate` does
-
-At a high level, for each entry in `config.sources`, it:
-
-1. **Finds input files** using `source.input` (glob / comma list / brace expansion).
-2. **Loads the prompt** via `source.prompt`.
-3. **Chooses output mode** based on `source.output`:
-   - If `source.output` ends with `/` → **multi-output mode** (one output per input file).
-   - Otherwise → **single-output mode** (one combined output file).
-4. **Skips work using caching** (`.knowhow/.hashes.json`):
-   - It computes an **MD5 hash of the prompt** and an **MD5 hash of each input file’s converted text**.
-   - If the prompt+file hashes match what was last generated, the output is skipped.
-5. **Writes generated documents** to disk.
-
-### Output mode behavior (from the code)
-
-#### A) Multi-output mode (directory output)
-If `source.output` ends with `/`:
-
-- For each matched input file:
-  - Compute an output folder that preserves subpaths **under the base prefix before `**`**.
-    - Example: with `input: "src/**/*.ts"`, the base prefix is `"src/"`.
-    - A file like `src/cli/index.ts` becomes an output at:
-      - `<output>/<nestedFolder>/<outputName>.<outputExt>`
-  - Default `outputExt` is `"mdx"` unless overridden by `outputExt`.
-
-#### B) Single-output mode (single file output)
-If `source.output` does **not** end with `/`:
-
-- It writes **one** `source.output` file that contains combined results for **all** matched inputs.
-
----
-
-## 2) `sources` configuration structure
-
-Your `sources` array lives in `.knowhow/knowhow.json` under `sources`.
-
-Each source entry is a `GenerationSource` with these commonly used fields:
-
-### `input`
-Controls which files are processed. Supported formats (as implemented):
-
-- **Single file**
-  ```json
-  "input": "src/index.ts"
-  ```
-- **Glob**
-  ```json
-  "input": "src/**/*.ts"
-  ```
-- **Comma-separated list**
-  ```json
-  "input": "src/a.ts,src/b.ts,src/c.ts"
-  ```
-  Comma lists are normalized into brace expansion internally.
-- **Brace expansion**
-  ```json
-  "input": "{src/a.ts,src/b.ts}"
-  ```
-
-> Implementation note: Knowhow normalizes comma-separated lists into `{a,b,c}` form (so it can pass it to the glob library).
-
----
-
-### `output`
-Controls where results are written:
-
-- **Directory output** (multi-output mode)
-  - Must end with `/`:
-  ```json
-  "output": ".knowhow/docs/"
-  ```
-- **Single file output** (single-output mode)
-  ```json
-  "output": ".knowhow/docs/README.mdx"
-  ```
-
-Knowhow creates directories automatically in multi-output mode.
-
----
-
-### `prompt`
-Controls the prompt to use for AI generation.
-
-Knowhow resolves `prompt` in this order:
-
-1. **Prompt name in `promptsDir`**  
-   If `prompt` is a name like `"BasicCodeDocumenter"`, it will try:
-   - `<promptsDir>/<prompt>.mdx`  
-   Example: `.knowhow/prompts/BasicCodeDocumenter.mdx`
-
-2. **Direct prompt file path**
-   - If `prompt` points to an existing file, it reads that file.
-
-3. **Inline prompt string**
-   - If neither a known prompt file nor a direct path exists, Knowhow treats the `prompt` value itself as the prompt text.
-
-> Also: Knowhow ensures your prompt contains a `{text}` placeholder. If it’s missing, it automatically appends:
-> `\n\n{text}`
-
----
-
-### `kind`
-Special processing kind.
-
-From the code:
-
-- If `kind` is `"file"` **or missing** → **standard file summarization** pipeline runs.
-- Otherwise → Knowhow attempts a **plugin-based handler**:
-  - It checks `Plugins.isPlugin(kind)`.
-  - If it is a plugin:
-    - It runs `Plugins.call(kind, input)` and writes the result to `source.output` (but **plugin output must be a single file**; directory outputs are rejected for plugins).
-  - After the plugin step (or if the kind is not a plugin), Knowhow still proceeds to the normal file summarization generation for that source.
-
-**Practical takeaway:**  
-Use `kind` for plugin integrations; otherwise default file generation happens.
-
----
-
-### `agent`
-Selects which agent to use when calling the AI summarizer.
-
-- If omitted, a default is used (the docs mention default agent: **Developer**).
-
----
-
-### `model`
-Overrides the model for this source.
-
-- The value is passed to `summarizeFile(...)` / `summarizeFiles(...)`.
-
-> If you don’t set `model`, Knowhow will use whatever default model the summarization layer chooses (not shown in the provided code).
-
----
-
-### `outputExt`
-Overrides the extension used for multi-output mode outputs.
-
-- Default in multi-output handler: `"mdx"`
-- Only applied when `output` ends with `/` (directory mode).
-
----
-
-### `outputName`
-Overrides the filename portion used for multi-output mode.
-
-- Only applied when `output` ends with `/`.
-- For each input file, output filename becomes:
-  - `<outputFolder>/<outputName>.<outputExt>` (instead of using the input’s basename)
-
----
-
-## 3) Prompt resolution (where your prompt comes from)
-
-Knowhow loads prompts with `loadPrompt(promptName)` and supports:
-
-### A) Prompt file in `promptsDir`
-- Default `promptsDir`: `.knowhow/prompts`
-- Example prompt file:
-  - `.knowhow/prompts/MyPrompt.mdx`
-
-Config:
-```json
-"prompt": "MyPrompt"
-```
-
-Knowhow reads:
-- `.knowhow/prompts/MyPrompt.mdx`
-
-### B) Direct prompt file path
-Config:
-```json
-"prompt": "./prompts/MyPrompt.mdx"
-```
-
-Knowhow reads that file if it exists.
-
-### C) Inline prompt string
-Config:
-```json
-"prompt": "Summarize the following code and output markdown with sections..."
-```
-
-### `{text}` placeholder requirement
-Knowhow requires/ensures the prompt contains `{text}`.
-
-- If your prompt doesn’t include it, Knowhow appends it automatically.
-- `{text}` is where Knowhow inserts the content it’s summarizing (the code/text extracted from each input file).
-
----
-
-## 4) Input patterns: examples
-
-### Single file
-```json
-{
-  "input": "src/index.ts",
-  "output": ".knowhow/out/index.mdx",
-  "prompt": "BasicCodeDocumenter"
-}
-```
-
-### Glob (multiple files → combined single output)
-```json
-{
-  "input": "src/**/*.ts",
-  "output": ".knowhow/docs/SDK.md",
-  "prompt": "BasicCodeDocumenter"
-}
-```
-
-### Glob (multiple files → one output per file)
-```json
-{
-  "input": "src/**/*.ts",
-  "output": ".knowhow/docs/",
-  "prompt": "BasicCodeDocumenter",
-  "outputExt": "mdx"
-}
-```
-
-### Comma-separated inputs (combined single output)
-```json
-{
-  "input": "src/a.ts,src/b.ts,src/c.ts",
-  "output": ".knowhow/docs/selected.md",
-  "prompt": "BasicCodeDocumenter"
-}
-```
-
-### Brace expansion
-```json
-{
-  "input": "{src/a.ts,src/b.ts}",
-  "output": ".knowhow/docs/selected.md",
-  "prompt": "BasicCodeDocumenter"
-}
-```
-
----
-
-## 5) Output modes: directory vs single file
-
-### Directory output (`output` ends with `/`)
-Produces **N output files** (one per input file matched).
-
-Each output file is placed under your output directory while preserving nested folders relative to the prefix before `**`.
-
----
-
-### Single-file output (`output` is a file path)
-Produces **one output file** that combines all matched inputs into a single document.
-
----
-
-## 6) Hashing / caching: when outputs are skipped
-
-Knowhow uses `.knowhow/.hashes.json` and stores hashes keyed by the input file path (and the prompt hash).
-
-In both output modes:
-
-- It computes:
-  - `promptHash = md5(prompt)`
-  - `fileHash = md5(convertToText(file))`
-- It calls `checkNoFilesChanged(...)` for the “to check” set:
-  - **Multi-output mode** checks: `[file, outputFile]`
-  - **Single-output mode** checks: `[outputFile, ...files]`
-- If nothing changed, Knowhow logs a skip and moves on.
-
-**Important:** If the input or output file is missing on disk, regeneration will happen.
-
----
-
-## 7) Writing good `.mdx` prompt files
-
-Knowhow expects prompt files to be **MDX** templates (e.g. `.knowhow/prompts/MyPrompt.mdx`).
-
-### Minimum requirement
-Your prompt must include a `{text}` placeholder (Knowhow will add it if you forget).
-
-### Recommended structure
-A solid prompt usually asks for:
-
-- Clear sections (e.g. Overview / API / Usage / Notes)
-- Output format (markdown headings, lists)
-- Constraints (brevity, accuracy)
-- Interpretation rules (assume code is partial, etc.)
-
-### Example prompt file: `.knowhow/prompts/BasicCodeDocumenter.mdx`
-
-```mdx
-# File documentation
-
-You are a technical writer.
-
-Given this code, produce documentation with:
-1. **Purpose** (1-3 sentences)
-2. **Key exported items** (functions/classes/types)
-3. **How it works** (step-by-step at a high level)
-4. **Important caveats** (edge cases, assumptions)
-5. **Examples** (if obvious)
-
-Return valid Markdown.
-
-Source content:
-```text
-{text}
-```
-```
-
-### About “file: src/cli.ts”
-Many Knowhow prompt templates also include a filename header (often formatted like `file: src/cli.ts`) above the `{text}` block. In your own prompts, follow the same pattern you see in the built-in prompts under `.knowhow/prompts/`.
-
----
-
-## 8) Pipeline examples (transcribe → summarize → embed)
-
-`knowhow generate` performs “summarize / document from inputs” steps. Embeddings are handled by a separate command (`knowhow embed`), but you can model a pipeline with multiple config sections.
-
-### Example: Transcribe audio → generate summaries → embed them
-
-1. **Transcribe step**  
-   Use `sources` with an appropriate `kind` if you have a transcription plugin installed (or you can generate from already-transcribed text).
-
-2. **Summarize step**  
-   Use `knowhow generate` to turn transcripts into markdown documents.
-
-3. **Embed step**  
-   Use `embedSources` for chunking and embedding.
-
-Example config outline:
-
-```json
-{
-  "sources": [
-    {
-      "input": "audio/**/*.txt",
-      "output": ".knowhow/transcripts/",
-      "prompt": "TranscriptSummarizer",
-      "outputExt": "mdx"
-    },
-    {
-      "input": ".knowhow/transcripts/**/*.mdx",
-      "output": ".knowhow/docs/AllSummaries.mdx",
-      "prompt": "ProjectSummary"
-    }
-  ],
-  "embedSources": [
-    {
-      "input": ".knowhow/docs/**/*.mdx",
-      "output": ".knowhow/embeddings/docs.json",
-      "prompt": "BasicEmbeddingExplainer",
-      "chunkSize": 2000
-    }
-  ]
-}
-```
-
-Run sequence:
-- `knowhow generate`
-- `knowhow embed`
-
----
-
-## 9) Running for specific sources
-
-From the provided code, `generate()` loops through **all** entries in `config.sources`:
-
-```ts
-for (const source of config.sources) {
-  ...
-}
-```
-
-So, there isn’t an obvious built-in “select by name” mechanism shown here.
-
-### Practical approaches
-- **Temporarily edit** `.knowhow/knowhow.json` to include only the sources you want to regenerate.
-- Split sources into multiple config files/directories and swap configs (if your workflow supports it).
-- Rely on caching: if your inputs and prompts haven’t changed, Knowhow will skip work automatically.
-
----
-
-## 10) Practical `sources` config examples
-
-### Example A: Generate one file per component (directory output)
-```json
-{
-  "sources": [
-    {
-      "kind": "file",
-      "input": "src/components/**/*.ts",
-      "output": ".knowhow/docs/components/",
-      "prompt": "BasicCodeDocumenter",
-      "outputExt": "mdx",
-      "agent": "Developer",
-      "model": "gpt-5.4-nano"
-    }
-  ]
-}
-```
-
-### Example B: Generate a single README from multiple files (single-file output)
-```json
-{
-  "sources": [
-    {
-      "input": "src/**/*.ts",
-      "output": ".knowhow/docs/README.mdx",
-      "prompt": "BasicProjectDocumenter"
-    }
-  ]
-}
-```
-
-### Example C: Combine a custom set of files using comma-separated input
-```json
-{
-  "sources": [
-    {
-      "input": "src/cli.ts,src/config.ts,src/index.ts",
-      "output": ".knowhow/docs/CLI-Notes.mdx",
-      "prompt": "BasicCodeDocumenter"
-    }
-  ]
-}
-```
-
----
-
-If you want, paste your current `.knowhow/knowhow.json` `sources` section and the prompt(s) you’re using, and I’ll help you validate the config (including output folder structure expectations and caching behavior).