@typecad/framework-zephyr 1.0.0-alpha.16 → 1.0.0-alpha.19

package/src/lowering/sensor.ts

@@ -1,155 +1,159 @@
-// ---------------------------------------------------------------------------
-// Sensor lowering — Zephyr's uniform sensor API over the generated catalog
-//
-// One code shape for every part in @typecad/hal's sensor catalog: the op's
-// part token resolves to the DT compatible, the bus string to the controller
-// index, and the address to the I2C reg. The names are derived identically
-// here (device handles), in strategy.ts state blocks, and in the overlay
-// scanner (dt-config/overlay.ts + toolchain/index.ts) — the tc-pwm<pin>
-// discipline: both sides derive from the same facts, so they cannot drift.
-//
-// Kconfig: nothing per-part. The in-tree driver Kconfigs are `default y` on
-// DT_HAS_<COMPAT>_ENABLED, so the overlay's child node IS the enable switch;
-// CONFIG_SENSOR (the umbrella under `if SENSOR`) is usage-gated in
-// dt-config/kconfig.ts off the lowered `sensor_` tokens.
-// ---------------------------------------------------------------------------
-
-import { SENSOR_PART_INFO } from '@typecad/hal';
-import type { HALOpIR } from '@typecad/cuttlefish/api/shared';
-import { parseControllerIndex } from './util.js';
-
-/** Strip the 'SENSOR.' property-access prefix from a part token arg. */
-export function sensorPartKey(part: string): string {
-  return part.replace(/^SENSOR\./, '');
-}
-
-/** Strip the 'CHAN.' property-access prefix from a channel arg. */
-export function sensorChanName(chan: string): string {
-  return chan.replace(/^CHAN\./, '');
-}
-
-/** All names a constructed sensor is known by, derived from the op facts. */
-export interface SensorNames {
-  /** DT nodelabel of the child node the overlay emits
-   *  (tc_<part>_i2c<N>_0x<addr> / tc_<part>_spi<N>_cs<pin>). */
-  dtLabel: string;
-  /** C device-handle variable (__tc_sensor_<stem>_dev). */
-  devVar: string;
-  /** C sensor_value scratch variable (__tc_sensor_<stem>_val). */
-  valVar: string;
-  /** The controller index the bus string carries. */
-  busIndex: number;
-  /** The bus port: I2C address or SPI CS pin. */
-  port: number;
-  /** 'i2c' | 'spi'. */
-  busKind: 'i2c' | 'spi';
-}
-
-/** Derive a sensor's DT/C++ names. The scanner regexes the emitted __tc_
- *  prefix form, so the part group must stay [a-z0-9_]+ and greedy. */
-export function sensorNames(part: string, bus: string, port: number | string, busKind: string = 'i2c'): SensorNames {
-  const partKey = sensorPartKey(String(part));
-  const busIndex = parseControllerIndex(typeof bus === 'string' ? bus : String(bus));
-  const portNum = typeof port === 'number' ? port : parseInt(String(port));
-  const stem = busKind === 'spi'
-    ? `${partKey}_spi${busIndex}_cs${portNum}`
-    : `${partKey}_i2c${busIndex}_0x${portNum.toString(16)}`;
-  return {
-    dtLabel: `tc_${stem}`,
-    devVar: `__tc_sensor_${stem}_dev`,
-    valVar: `__tc_sensor_${stem}_val`,
-    busIndex,
-    port: portNum,
-    busKind: busKind === 'spi' ? 'spi' : 'i2c',
-  };
-}
-
-/**
- * Resolve the part token against the generated catalog, validating the bus
- * kind and (when the driver scan knows them) the channel. Throws a build-time
- * error with the Zephyr-facing name — the same words the user would meet in
- * Zephyr docs, checked before west ever runs.
- */
-/** @internal */
-function requirePartInfo(partKey: string) {
-  const info = SENSOR_PART_INFO[partKey];
-  if (!info) {
-    throw new Error(
-      `Sensor part '${partKey}' is not in the Zephyr sensor catalog (SENSOR in @typecad/hal). ` +
-        `Check the token against the catalog — it is the compatible with , and - replaced by _.`,
-    );
-  }
-  return info;
-}
-
-/** Validate the op's bus kind against the part's bindings. */
-function requireBusKind(partKey: string, info: ReturnType<typeof requirePartInfo>, busKind: string) {
-  if (!info.buses.includes(busKind)) {
-    throw new Error(
-      `Sensor part '${partKey}' (${info.compatible}) does not bind on ${busKind.toUpperCase()} — ` +
-        `its bindings are ${info.buses.join('/').toUpperCase()}.`,
-    );
-  }
-}
-
-/**
- * Emit the per-sensor state block (device handle + sensor_value scratch).
- * Called from shimLines for each distinct sensor the program's ops reference.
- */
-export function sensorStateLines(part: string, bus: string, port: number | string, busKind: string = 'i2c', spiHz: number | string = 0, spiMode: number | string = 0, alertPin: number | string = -1): string[] {
-  const partKey = sensorPartKey(String(part));
-  requireBusKind(partKey, requirePartInfo(partKey), busKind);
-  const n = sensorNames(part, bus, port, busKind);
-  // The config comment carries construction facts (SPI clock, mode, alert
-  // GPIO) to the overlay scanner — they shape the DT node, not the C++.
-  const cfg = `// tc-sensor-cfg: ${n.dtLabel} hz=${Number(spiHz)} mode=${Number(spiMode)} alert=${Number(alertPin)}`;
-  return [
-    '// CUTTLEFISH_SENSOR_BEGIN',
-    `static const struct device* ${n.devVar} = DEVICE_DT_GET(DT_NODELABEL(${n.dtLabel}));`,
-    `static struct sensor_value ${n.valVar};`,
-    cfg,
-    '// CUTTLEFISH_SENSOR_END',
-  ];
-}
-
-/**
- * Resolve a HAL sensor.* op to Zephyr C++.
- * Returns `{ code }` for fetch (statement), `{ expression }` for get (value).
- */
-export function lowerSensor(op: HALOpIR): { code?: string; expression?: string } {
-  const o = op as any;
-  const partKey = sensorPartKey(String(o.part));
-  const info = requirePartInfo(partKey);
-  requireBusKind(partKey, info, String(o.busKind ?? 'i2c'));
-  const n = sensorNames(o.part, o.bus, o.port ?? o.address, String(o.busKind ?? 'i2c'));
-
-  switch (op.operation) {
-    case 'sensor.fetch':
-      // sensor_sample_fetch. The leading (void) keeps the value scratch
-      // referenced under Zephyr's -Werror when the program fetches but never
-      // reads a channel (the state block is emitted per referenced sensor).
-      return {
-        code: `(void)${n.valVar}; sensor_sample_fetch(${n.devVar});`,
-      };
-    case 'sensor.get': {
-      const chan = sensorChanName(String(o.chan));
-      if (info.channels.length > 0 && !info.channels.includes(chan)) {
-        throw new Error(
-          `Sensor part '${partKey}' (${info.compatible}) does not serve channel '${chan}' — ` +
-            `its driver serves: ${info.channels.join(', ')}.`,
-        );
-      }
-      // sensor_value is val1 + val2 * 1e-6; evaluate once per read.
-      return {
-        expression:
-          `(sensor_channel_get(${n.devVar}, SENSOR_CHAN_${chan}, &${n.valVar}), ` +
-          `static_cast<double>(${n.valVar}.val1) + static_cast<double>(${n.valVar}.val2) / 1000000.0)`,
-      };
-    }
-    default:
-      throw new Error(
-        `framework-zephyr does not yet support HAL op \`${op.operation}\`. ` +
-          `Open an issue or use rawCpp() to emit it manually.`,
-      );
-  }
-}
+// ---------------------------------------------------------------------------
+// Sensor lowering — Zephyr's uniform sensor API over the generated catalog
+//
+// One code shape for every part in @typecad/hal's sensor catalog: the op's
+// part token resolves to the DT compatible, the bus string to the controller
+// index, and the address to the I2C reg. The names are derived identically
+// here (device handles), in strategy.ts state blocks, and in the overlay
+// scanner (dt-config/overlay.ts + toolchain/index.ts) — the tc-pwm<pin>
+// discipline: both sides derive from the same facts, so they cannot drift.
+//
+// Kconfig: nothing per-part. The in-tree driver Kconfigs are `default y` on
+// DT_HAS_<COMPAT>_ENABLED, so the overlay's child node IS the enable switch;
+// CONFIG_SENSOR (the umbrella under `if SENSOR`) is usage-gated in
+// dt-config/kconfig.ts off the lowered `sensor_` tokens.
+// ---------------------------------------------------------------------------
+
+import { SENSOR_PART_INFO } from '@typecad/hal';
+import type { HALOpIR } from '@typecad/cuttlefish/api/shared';
+import { parseControllerIndex } from './util.js';
+
+/** Strip the 'SENSOR.' property-access prefix from a part token arg. */
+export function sensorPartKey(part: string): string {
+  return part.replace(/^SENSOR\./, '');
+}
+
+/** Strip the 'CHAN.' property-access prefix from a channel arg. */
+export function sensorChanName(chan: string): string {
+  return chan.replace(/^CHAN\./, '');
+}
+
+/** All names a constructed sensor is known by, derived from the op facts. */
+export interface SensorNames {
+  /** DT nodelabel of the child node the overlay emits
+   *  (tc_<part>_i2c<N>_0x<addr> / tc_<part>_spi<N>_cs<pin>). */
+  dtLabel: string;
+  /** C device-handle variable (__tc_sensor_<stem>_dev). */
+  devVar: string;
+  /** C sensor_value scratch variable (__tc_sensor_<stem>_val). */
+  valVar: string;
+  /** The controller index the bus string carries. */
+  busIndex: number;
+  /** The bus port: I2C address or SPI CS pin. */
+  port: number;
+  /** 'i2c' | 'spi'. */
+  busKind: 'i2c' | 'spi' | 'w1';
+}
+
+/** Derive a sensor's DT/C++ names. The scanner regexes the emitted __tc_
+ *  prefix form, so the part group must stay [a-z0-9_]+ and greedy. */
+export function sensorNames(part: string, bus: string, port: number | string, busKind: string = 'i2c'): SensorNames {
+  const partKey = sensorPartKey(String(part));
+  const busIndex = parseControllerIndex(typeof bus === 'string' ? bus : String(bus));
+  const portNum = typeof port === 'number' ? port : parseInt(String(port));
+  const stem = busKind === 'spi'
+    ? `${partKey}_spi${busIndex}_cs${portNum}`
+    : busKind === 'w1'
+      ? `${partKey}_w1_p${portNum}`
+      : `${partKey}_i2c${busIndex}_0x${portNum.toString(16)}`;
+  return {
+    dtLabel: `tc_${stem}`,
+    devVar: `__tc_sensor_${stem}_dev`,
+    valVar: `__tc_sensor_${stem}_val`,
+    busIndex,
+    port: portNum,
+    busKind: busKind === 'spi' ? 'spi' : busKind === 'w1' ? 'w1' : 'i2c',
+  };
+}
+
+/**
+ * Resolve the part token against the generated catalog, validating the bus
+ * kind and (when the driver scan knows them) the channel. Throws a build-time
+ * error with the Zephyr-facing name — the same words the user would meet in
+ * Zephyr docs, checked before west ever runs.
+ */
+/** @internal */
+function requirePartInfo(partKey: string) {
+  const info = SENSOR_PART_INFO[partKey];
+  if (!info) {
+    throw new Error(
+      `Sensor part '${partKey}' is not in the Zephyr sensor catalog (SENSOR in @typecad/hal). ` +
+        `Check the token against the catalog — it is the compatible with , and - replaced by _.`,
+    );
+  }
+  return info;
+}
+
+/** Validate the op's bus kind against the part's bindings. */
+function requireBusKind(partKey: string, info: ReturnType<typeof requirePartInfo>, busKind: string) {
+  if (!info.buses.includes(busKind)) {
+    throw new Error(
+      `Sensor part '${partKey}' (${info.compatible}) does not bind on ${busKind.toUpperCase()} — ` +
+        `its bindings are ${info.buses.join('/').toUpperCase()}.`,
+    );
+  }
+}
+
+/**
+ * Emit the per-sensor state block (device handle + sensor_value scratch).
+ * Called from shimLines for each distinct sensor the program's ops reference.
+ */
+export function sensorStateLines(part: string, bus: string, port: number | string, busKind: string = 'i2c', spiHz: number | string = 0, spiMode: number | string = 0, alertPin: number | string = -1, resolution: number | string = 12): string[] {
+  const partKey = sensorPartKey(String(part));
+  requireBusKind(partKey, requirePartInfo(partKey), busKind);
+  const n = sensorNames(part, bus, port, busKind);
+  // The config comment carries construction facts (SPI clock, mode, alert
+  // GPIO) to the overlay scanner — they shape the DT node, not the C++.
+  const cfg = busKind === 'w1'
+    ? `// tc-sensor-cfg: ${n.dtLabel} res=${Number(resolution)}`
+    : `// tc-sensor-cfg: ${n.dtLabel} hz=${Number(spiHz)} mode=${Number(spiMode)} alert=${Number(alertPin)}`;
+  return [
+    '// CUTTLEFISH_SENSOR_BEGIN',
+    `static const struct device* ${n.devVar} = DEVICE_DT_GET(DT_NODELABEL(${n.dtLabel}));`,
+    `static struct sensor_value ${n.valVar};`,
+    cfg,
+    '// CUTTLEFISH_SENSOR_END',
+  ];
+}
+
+/**
+ * Resolve a HAL sensor.* op to Zephyr C++.
+ * Returns `{ code }` for fetch (statement), `{ expression }` for get (value).
+ */
+export function lowerSensor(op: HALOpIR): { code?: string; expression?: string } {
+  const o = op as any;
+  const partKey = sensorPartKey(String(o.part));
+  const info = requirePartInfo(partKey);
+  requireBusKind(partKey, info, String(o.busKind ?? 'i2c'));
+  const n = sensorNames(o.part, o.bus, o.port ?? o.address, String(o.busKind ?? 'i2c'));
+
+  switch (op.operation) {
+    case 'sensor.fetch':
+      // sensor_sample_fetch. The leading (void) keeps the value scratch
+      // referenced under Zephyr's -Werror when the program fetches but never
+      // reads a channel (the state block is emitted per referenced sensor).
+      return {
+        code: `(void)${n.valVar}; sensor_sample_fetch(${n.devVar});`,
+      };
+    case 'sensor.get': {
+      const chan = sensorChanName(String(o.chan));
+      if (info.channels.length > 0 && !info.channels.includes(chan)) {
+        throw new Error(
+          `Sensor part '${partKey}' (${info.compatible}) does not serve channel '${chan}' — ` +
+            `its driver serves: ${info.channels.join(', ')}.`,
+        );
+      }
+      // sensor_value is val1 + val2 * 1e-6; evaluate once per read.
+      return {
+        expression:
+          `(sensor_channel_get(${n.devVar}, SENSOR_CHAN_${chan}, &${n.valVar}), ` +
+          `static_cast<double>(${n.valVar}.val1) + static_cast<double>(${n.valVar}.val2) / 1000000.0)`,
+      };
+    }
+    default:
+      throw new Error(
+        `framework-zephyr does not yet support HAL op \`${op.operation}\`. ` +
+          `Open an issue or use rawCpp() to emit it manually.`,
+      );
+  }
+}

package/src/lowering/strip.ts

@@ -0,0 +1,81 @@
+// ---------------------------------------------------------------------------
+// Strip lowering — ws2812-spi child node + led_strip_update_rgb
+//
+// The strip is an spi-device child of one of the board's wired SPI
+// controllers (Zephyr's ws2812-spi driver synthesizes the WS2812 waveform
+// on the bus's MOSI line — the board-equal form: the strip uses whatever
+// pads the board's devicetree routes that SPI to). The shim block declares
+// the pixel buffer + device handle; the overlay generator synthesizes the
+// DT child node (chain length + tuned frames — see dt-config/overlay.ts).
+// set/fill edit the buffer; show() is one led_strip_update_rgb.
+// ----------------------------------------------------------------------------
+
+import type { HALOpIR } from '@typecad/cuttlefish/api/shared';
+import type { ZephyrChipDescriptor } from '../chips/types.js';
+import { parseControllerIndex } from './util.js';
+
+/** The C variable names for a strip on controller index `idx`. */
+function stripVars(idx: number): { buf: string; dev: string } {
+  return { buf: `__tc_strip${idx}_buf`, dev: `__tc_strip${idx}_dev` };
+}
+
+/**
+ * Emit the per-strip state. Called from shimLines for each SPI controller
+ * the program drives a strip on: one `struct led_rgb` buffer sized by the
+ * construction chain length + the DT device handle.
+ */
+export function stripInitLines(chip: ZephyrChipDescriptor, busIndex: number, count: number): string[] {
+  const ctrl = chip.spi?.controllers[busIndex];
+  if (!ctrl) return [];
+  const { buf, dev } = stripVars(busIndex);
+  return [
+    '// CUTTLEFISH_STRIP_BEGIN',
+    `static struct led_rgb ${buf}[${count}];`,
+    `static const struct device* ${dev} = DEVICE_DT_GET(DT_NODELABEL(tc_strip${busIndex}));`,
+    '// CUTTLEFISH_STRIP_END',
+  ];
+}
+
+/**
+ * Resolve a HAL strip.* op to Zephyr C++.
+ * Returns `{ code }` for statement ops.
+ */
+export function lowerStrip(
+  op: HALOpIR,
+  chip: ZephyrChipDescriptor,
+): { code?: string; expression?: string } {
+  const o = op as any;
+  // DAC discipline: a board with no wired SPI (or an out-of-range bus)
+  // lowers to a comment naming the constraint — the honest per-board answer
+  // (the manifest probe runs boardless; profileDiagnostics flags the usage).
+  const idx = parseControllerIndex(typeof o.bus === 'string' ? o.bus : String(o.bus));
+  if (!chip.spi || idx >= chip.spi.controllers.length) {
+    const wired = chip.spi ? `this board wires ${chip.spi.controllers.length} SPI controller(s)` : 'this board wires no SPI controller';
+    return { code: `/* strip on bus ${o.bus}: no such SPI controller — ${wired}; a Strip rides one of the board's SPI buses */` };
+  }
+  const { buf, dev } = stripVars(idx);
+  const count = Number(o.count ?? 1) || 1;
+
+  switch (op.operation) {
+    case 'strip.set_pixel': {
+      // Buffer assignment — runtime index and channel values splice as C++.
+      // The driver applies the strip's color order (GRB mapping) at show.
+      return {
+        code: `{ uint32_t __tc_strip_i = static_cast<uint32_t>(${o.index}); if (__tc_strip_i < ${count}U) { ${buf}[__tc_strip_i].r = static_cast<uint8_t>(${o.r}); ${buf}[__tc_strip_i].g = static_cast<uint8_t>(${o.g}); ${buf}[__tc_strip_i].b = static_cast<uint8_t>(${o.b}); } }`,
+      };
+    }
+    case 'strip.fill': {
+      return {
+        code: `{ for (uint32_t __tc_strip_j = 0U; __tc_strip_j < ${count}U; ++__tc_strip_j) { ${buf}[__tc_strip_j].r = static_cast<uint8_t>(${o.r}); ${buf}[__tc_strip_j].g = static_cast<uint8_t>(${o.g}); ${buf}[__tc_strip_j].b = static_cast<uint8_t>(${o.b}); } }`,
+      };
+    }
+    case 'strip.show': {
+      return { code: `(void)led_strip_update_rgb(${dev}, ${buf}, ${count}U);` };
+    }
+    default:
+      throw new Error(
+        `framework-zephyr does not yet support HAL op \`${op.operation}\`. ` +
+          `Open an issue or use rawCpp() to emit it manually.`,
+      );
+  }
+}

package/src/lowering/thread.ts

@@ -48,8 +48,12 @@ export function lowerThread(op: HALOpIR): { code?: string; expression?: string }
     case 'thread.start': {
       // Store the entry, create + schedule immediately. The stack size comes
       // from the state block (the construction fact), via K_THREAD_STACK_SIZEOF.
+      // The thread gets a name so trace heartbeats report it as something
+      // other than "unnamed" — k_thread_name_set returns -ENOSYS without
+      // CONFIG_THREAD_NAME (which the scaffold turns on for traced builds),
+      // so the call is emitted unconditionally.
       return {
-        code: `${p}_fn = (${o.handler}); (void)k_thread_create(&${p}_thread, ${p}_stack, K_THREAD_STACK_SIZEOF(${p}_stack), ${p}_tramp, NULL, NULL, NULL, ${o.priority ?? 5}, 0, K_NO_WAIT);`,
+        code: `${p}_fn = (${o.handler}); (void)k_thread_create(&${p}_thread, ${p}_stack, K_THREAD_STACK_SIZEOF(${p}_stack), ${p}_tramp, NULL, NULL, NULL, ${o.priority ?? 5}, 0, K_NO_WAIT); (void)k_thread_name_set(&${p}_thread, "tc_thread_${instance}");`,
       };
     }
     case 'thread.join':