@torrent-tv/proxy 2.87.8 → 2.87.10

package/services/encode/calibration.js

@@ -1,361 +1,361 @@
-/**
- * @file Which encoding modes this machine may use, and what each costs at
- * every size it may be asked for — measured at startup, before any viewer
- * (roadmap item 97, step 14).
- *
- * A MODE is one encoder at one of the settings the proxy can actually select:
- * every libx264 preset the offer chooses from, and the one setting a hardware
- * encoder is driven at. A mode is usable only if it has been shown here to do
- * two things on THIS machine:
- *
- * 1. produce a correct stream through the product's own arguments — the same
- *    `buildVideoArgs` a real output is encoded with, into fMP4 segments, each
- *    of which must then decode with no error. A device being present, or one
- *    of its settings passing, qualifies nothing else;
- * 2. encode at a known speed at the size it is asked for.
- *
- * WHY SEVERAL SIZES. The speed used to be read at 640x360 alone and scaled to
- * every other size by pixel count. Measured 2026-08-22, cost per pixel is not
- * constant: 1280x720 came back at 0.445x the predicted throughput on
- * `ultrafast` and 0.725x on `fast` (`research/preset-benchmark-size-scaling-
- * 2026-08-22.md`). So each mode is read at a set of sizes that spans the
- * ladder, and a size between two readings is priced by interpolating between
- * them — never beyond the smallest or the largest one read. A frame outside
- * what was read is a mode this machine has not shown it can do, and is not
- * offered.
- *
- * HOW FAR AN INTERPOLATION MAY BE TRUSTED is measured too, not assumed: where
- * three consecutive sizes were read, the middle one is predicted from the two
- * outside it and compared with its own reading. The largest such error for the
- * mode is its error bound, and every interpolated figure is lowered by it. A
- * mode with fewer than three sizes read has no bound, and is then used only at
- * the sizes it was read at.
- *
- * WHAT IS NOT READ, so the startup stays short. Sizes are read from the
- * smallest up and, at each size, modes from the fastest down. A mode that
- * cannot keep up at a size ends that size: every slower mode is slower still.
- * A size at which even the fastest mode cannot keep up ends the walk: every
- * larger size is larger still. What is left unread is unavailable, which is
- * the answer it would have got anyway.
- */
-
-import { mkdtempSync, readdirSync, rmSync, statSync } from "node:fs";
-import os from "node:os";
-import path from "node:path";
-import { softwareRateControlFor, TRANSCODE_FPS } from "./args.js";
-import {
-  CALIBRATION_DIR,
-  CALIBRATION_REFERENCE_CLIP,
-  decodeToRawFrames,
-  measureEncodeSlope,
-  runFfmpeg,
-  verifySegmentsDecodeCleanly
-} from "./hwaccel.js";
-import { interpolationErrorOf } from "./throughput.js";
-
-export { throughputAt, interpolationErrorOf } from "./throughput.js";
-
-/**
- * The sizes a mode is read at, smallest first.
- *
- * The smallest is below every frame the ladder produces — its lowest row is
- * 426x240, and a 4:3 or narrower source gives less area than that at the same
- * height. The largest is the 2160 row. The two between are the 720 and 1080
- * rows, where most films are watched. 640x360 is the reference size every
- * earlier reading was taken at, so the figures stay comparable with them.
- */
-export const CALIBRATION_FRAMES = Object.freeze([
-  Object.freeze({ width: 256, height: 144 }),
-  Object.freeze({ width: 640, height: 360 }),
-  Object.freeze({ width: 1280, height: 720 }),
-  Object.freeze({ width: 1920, height: 1080 }),
-  Object.freeze({ width: 3840, height: 2160 })
-]);
-
-/** The size the correctness check encodes at, and every earlier reading was taken at. */
-const CHECK_FRAME = Object.freeze({ width: 640, height: 360 });
-
-/**
- * @typedef {object} SizeReading
- * @property {number} width
- * @property {number} height
- * @property {number} pixelsPerSec
- *
- * @typedef {object} CalibratedMode
- * @property {string} preset - The setting, or the encoder's name where it has one setting.
- * @property {number} pixelsPerSec - At 640x360, for everything that has always read that figure.
- * @property {SizeReading[]} bySize - Smallest first.
- * @property {number | null} interpolationError - The largest measured relative
- *   error of an interpolation between two readings, or null where it could not
- *   be measured.
- * @property {{ averageKbps: number, peakKbps: number } | null} segmentKbps -
- *   What the correctness check's segments carried.
- */
-
-/**
- * The settings a mode is known by, as text, for the log and for the key its
- * later observations are filed under.
- *
- * @param {{ benchmarkArgs: (rung: string | null) => string[] }} encoder
- * @param {string | null} rung
- * @returns {string}
- */
-export function settingsOf(encoder, rung) {
-  return encoder.benchmarkArgs(rung).join(" ");
-}
-
-/**
- * Encode the calibration clip through the product's own arguments for this
- * mode, and check every segment decodes on its own.
- *
- * @param {{ ffmpegBin: string, encoder: object, rung: string | null, segmentDurationSec: number }} params
- * @returns {Promise<{ ok: boolean, reason: string, segmentKbps: { averageKbps: number, peakKbps: number } | null }>}
- */
-export async function checkModeProducesCorrectSegments({ ffmpegBin, encoder, rung, segmentDurationSec }) {
-  let directory;
-  try {
-    directory = mkdtempSync(path.join(os.tmpdir(), "tt-modecheck-"));
-  } catch (error) {
-    return { ok: false, reason: `no writable temp directory (${error instanceof Error ? error.message : String(error)})`, segmentKbps: null };
-  }
-  // Three segments' worth, so at least two are cut and each is checked alone.
-  const seconds = segmentDurationSec * 3;
-  const rateControl = encoder.kind === "software"
-    ? softwareRateControlFor({ ...CHECK_FRAME, fps: TRANSCODE_FPS })
-    : null;
-  const args = [
-    "-hide_banner", "-loglevel", "error",
-    ...encoder.inputArgs,
-    "-stream_loop", "-1",
-    "-i", path.join(CALIBRATION_DIR, CALIBRATION_REFERENCE_CLIP),
-    "-t", String(seconds),
-    "-map", "0:v:0", "-an",
-    ...encoder.buildVideoArgs({
-      targetWidth: CHECK_FRAME.width,
-      targetHeight: CHECK_FRAME.height,
-      segmentDurationSec,
-      preset: rung ?? undefined,
-      fps: TRANSCODE_FPS,
-      tonemap: false,
-      forcedKeyframeTimes: null,
-      rateControl
-    }),
-    "-f", "hls",
-    "-hls_time", String(segmentDurationSec),
-    "-hls_list_size", "0",
-    "-hls_flags", "independent_segments",
-    "-hls_segment_type", "fmp4",
-    "-hls_fmp4_init_filename", "init.mp4",
-    "-hls_segment_filename", path.join(directory, "seg-%03d.m4s"),
-    path.join(directory, "index.m3u8")
-  ];
-  try {
-    const encoded = await runFfmpeg(ffmpegBin, args, 60_000);
-    if (encoded.code !== 0) {
-      const line = encoded.stderr.trim().split(/\r?\n/).pop() ?? "";
-      return { ok: false, reason: `the encode failed (exit ${encoded.code}${line ? `: ${line}` : ""})`, segmentKbps: null };
-    }
-    if (!(await verifySegmentsDecodeCleanly(ffmpegBin, directory))) {
-      return { ok: false, reason: "a segment it produced does not decode on its own", segmentKbps: null };
-    }
-    const sizes = readdirSync(directory)
-      .filter((name) => /^seg-\d+\.m4s$/.test(name))
-      .sort()
-      .map((name) => statSync(path.join(directory, name)).size);
-    // The last segment may be short; only whole ones say what a segment carries.
-    const whole = sizes.slice(0, Math.max(1, sizes.length - 1));
-    const kbps = whole.map((bytes) => (bytes * 8) / segmentDurationSec / 1000);
-    return {
-      ok: true,
-      reason: "",
-      segmentKbps: {
-        averageKbps: kbps.reduce((sum, value) => sum + value, 0) / kbps.length,
-        peakKbps: Math.max(...kbps)
-      }
-    };
-  } finally {
-    try {
-      rmSync(directory, { recursive: true, force: true, maxRetries: 5, retryDelay: 200 });
-    } catch {
-      // A temp directory the operating system will clear.
-    }
-  }
-}
-
-/**
- * Qualify and measure every selectable mode of one encoder.
- *
- * Always resolves. A mode that fails either half is left out, with the reason
- * logged; an encoder none of whose modes qualify comes back with no modes,
- * and nothing on this host is then re-encoded with it.
- *
- * @param {object} params
- * @param {string} params.ffmpegBin
- * @param {object} params.encoder - An `Encoder`.
- * @param {{ info: (m: string) => void, warn: (m: string) => void }} [params.logger]
- * @param {number} [params.segmentDurationSec]
- * @param {Array<{ width: number, height: number }>} [params.frames]
- * @param {object} [params.measure] - Replaces the three readings, for a check
- *   that must not run ffmpeg: `check`, `rawFrames`, `speed`.
- * @returns {Promise<{ modes: CalibratedMode[], refused: Array<{ preset: string, reason: string }> }>}
- */
-export async function calibrateEncoder({
-  ffmpegBin,
-  encoder,
-  logger,
-  segmentDurationSec = 4,
-  frames = CALIBRATION_FRAMES,
-  measure = null
-}) {
-  const log = logger ?? { info: () => {}, warn: () => {} };
-  const check = measure?.check ?? checkModeProducesCorrectSegments;
-  const rawFrames = measure?.rawFrames ?? ((frame) => decodeToRawFrames(ffmpegBin, log, frame));
-  const speed = measure?.speed ?? ((rung, rawPath, frame) => measureEncodeSlope(ffmpegBin, encoder, rung, rawPath, frame));
-  const release = measure?.release ?? ((rawPath) => {
-    try {
-      rmSync(path.dirname(rawPath), { recursive: true, force: true, maxRetries: 5, retryDelay: 200 });
-    } catch {
-      // A temp directory the operating system will clear.
-    }
-  });
-  const rungs = Array.isArray(encoder.selectableRungs) && encoder.selectableRungs.length > 0
-    ? encoder.selectableRungs
-    : [null];
-  const startedAt = Date.now();
-
-  /** @type {Map<string | null, { ok: boolean, reason: string, segmentKbps: object | null }>} */
-  const checked = new Map();
-  for (const rung of rungs) {
-    const answer = await check({ ffmpegBin, encoder, rung, segmentDurationSec });
-    checked.set(rung, answer);
-    if (!answer.ok) {
-      log.warn(`calibration: ${encoder.name} "${rung ?? "as it comes"}" is not used on this host — ${answer.reason}`);
-    }
-  }
-  const qualified = rungs.filter((rung) => checked.get(rung)?.ok === true);
-
-  /** @type {Map<string | null, SizeReading[]>} */
-  const readings = new Map(qualified.map((rung) => [rung, []]));
-  const sortedFrames = [...frames].sort((left, right) => left.width * left.height - right.width * right.height);
-  for (const frame of sortedFrames) {
-    if (qualified.length === 0) {
-      break;
-    }
-    const rawPath = await rawFrames(frame);
-    if (rawPath === null) {
-      log.warn(`calibration: no frames at ${frame.width}x${frame.height}; ${encoder.name} is not read there or above`);
-      break;
-    }
-    let fastestKeptUp = false;
-    try {
-      // Fastest first: the ladder is slowest first, so walk it backwards.
-      for (let index = qualified.length - 1; index >= 0; index -= 1) {
-        const rung = qualified[index];
-        const realtimes = await speed(rung, rawPath, frame);
-        if (realtimes === null) {
-          log.warn(`calibration: ${encoder.name} "${rung ?? "as it comes"}" gave no reading at ${frame.width}x${frame.height}`);
-          break;
-        }
-        readings.get(rung).push({
-          width: frame.width,
-          height: frame.height,
-          pixelsPerSec: frame.width * frame.height * TRANSCODE_FPS * realtimes
-        });
-        if (index === qualified.length - 1) {
-          fastestKeptUp = realtimes >= 1;
-        }
-        if (realtimes < 1) {
-          // Every slower mode is slower still at this size.
-          break;
-        }
-      }
-    } finally {
-      release(rawPath);
-    }
-    if (!fastestKeptUp) {
-      // Every larger size is larger still.
-      break;
-    }
-  }
-
-  /** @type {CalibratedMode[]} */
-  const modes = [];
-  /** @type {Array<{ preset: string, reason: string }>} */
-  const refused = [];
-  for (const rung of rungs) {
-    const preset = rung ?? encoder.name;
-    if (checked.get(rung)?.ok !== true) {
-      refused.push({ preset, reason: checked.get(rung)?.reason ?? "not checked" });
-      continue;
-    }
-    const bySize = readings.get(rung) ?? [];
-    if (bySize.length === 0) {
-      refused.push({ preset, reason: "no size was read" });
-      continue;
-    }
-    const reference = bySize.find((reading) => reading.width === CHECK_FRAME.width && reading.height === CHECK_FRAME.height) ?? bySize[0];
-    const interpolationError = interpolationErrorOf(bySize);
-    modes.push({
-      preset,
-      pixelsPerSec: reference.pixelsPerSec,
-      bySize,
-      interpolationError,
-      segmentKbps: checked.get(rung).segmentKbps
-    });
-    log.info(
-      `calibration: ${encoder.name} "${preset}" ` +
-      bySize.map((reading) => `${reading.width}x${reading.height}=${(reading.pixelsPerSec / 1e6).toFixed(1)}Mpx/s`).join(" ") +
-      ` interpolation error ${interpolationError === null ? "not measured, used only at the sizes read" : `${(interpolationError * 100).toFixed(1)}%`}` +
-      (checked.get(rung).segmentKbps
-        ? ` segments ${Math.round(checked.get(rung).segmentKbps.averageKbps)}kbps average, ${Math.round(checked.get(rung).segmentKbps.peakKbps)}kbps peak at ${CHECK_FRAME.width}x${CHECK_FRAME.height}`
-        : "")
-    );
-  }
-  log.info(
-    `calibration: ${encoder.name} ${modes.length} of ${rungs.length} mode(s) usable ` +
-    `(${((Date.now() - startedAt) / 1000).toFixed(1)}s)` +
-    (refused.length > 0 ? `; not usable: ${refused.map((one) => `${one.preset} (${one.reason})`).join(", ")}` : "")
-  );
-  return { modes, refused };
-}
-
-/**
- * What every encoder this proxy may use was measured to do, by kind: the one
- * detection chose, and software, which is where a failing hardware encoder
- * falls back to for the rest of the process.
- */
-export class HostCalibration {
-  /** @type {Map<string, CalibratedMode[]>} */
-  #byKind;
-
-  /**
-   * @param {object} params
-   * @param {Record<string, CalibratedMode[]>} params.byKind
-   * @param {import("./fingerprint.js").HostFingerprint | null} [params.fingerprint]
-   */
-  constructor({ byKind, fingerprint = null }) {
-    this.#byKind = new Map(Object.entries(byKind ?? {}).map(([kind, modes]) => [kind, Array.isArray(modes) ? modes : []]));
-    this.fingerprint = fingerprint;
-  }
-
-  /**
-   * The usable modes of one encoder kind, slowest first — the shape the offer
-   * and the preset choice have always read. Null where that kind was not
-   * calibrated at all.
-   *
-   * @param {string | null | undefined} kind
-   * @returns {CalibratedMode[] | null}
-   */
-  modesFor(kind) {
-    return kind && this.#byKind.has(kind) ? this.#byKind.get(kind) : null;
-  }
-
-  /**
-   * Every kind that was calibrated.
-   *
-   * @returns {string[]}
-   */
-  kinds() {
-    return [...this.#byKind.keys()];
-  }
-}
+/**
+ * @file Which encoding modes this machine may use, and what each costs at
+ * every size it may be asked for — measured at startup, before any viewer
+ * (roadmap item 97, step 14).
+ *
+ * A MODE is one encoder at one of the settings the proxy can actually select:
+ * every libx264 preset the offer chooses from, and the one setting a hardware
+ * encoder is driven at. A mode is usable only if it has been shown here to do
+ * two things on THIS machine:
+ *
+ * 1. produce a correct stream through the product's own arguments — the same
+ *    `buildVideoArgs` a real output is encoded with, into fMP4 segments, each
+ *    of which must then decode with no error. A device being present, or one
+ *    of its settings passing, qualifies nothing else;
+ * 2. encode at a known speed at the size it is asked for.
+ *
+ * WHY SEVERAL SIZES. The speed used to be read at 640x360 alone and scaled to
+ * every other size by pixel count. Measured 2026-08-22, cost per pixel is not
+ * constant: 1280x720 came back at 0.445x the predicted throughput on
+ * `ultrafast` and 0.725x on `fast` (`research/preset-benchmark-size-scaling-
+ * 2026-08-22.md`). So each mode is read at a set of sizes that spans the
+ * ladder, and a size between two readings is priced by interpolating between
+ * them — never beyond the smallest or the largest one read. A frame outside
+ * what was read is a mode this machine has not shown it can do, and is not
+ * offered.
+ *
+ * HOW FAR AN INTERPOLATION MAY BE TRUSTED is measured too, not assumed: where
+ * three consecutive sizes were read, the middle one is predicted from the two
+ * outside it and compared with its own reading. The largest such error for the
+ * mode is its error bound, and every interpolated figure is lowered by it. A
+ * mode with fewer than three sizes read has no bound, and is then used only at
+ * the sizes it was read at.
+ *
+ * WHAT IS NOT READ, so the startup stays short. Sizes are read from the
+ * smallest up and, at each size, modes from the fastest down. A mode that
+ * cannot keep up at a size ends that size: every slower mode is slower still.
+ * A size at which even the fastest mode cannot keep up ends the walk: every
+ * larger size is larger still. What is left unread is unavailable, which is
+ * the answer it would have got anyway.
+ */
+
+import { mkdtempSync, readdirSync, rmSync, statSync } from "node:fs";
+import os from "node:os";
+import path from "node:path";
+import { softwareRateControlFor, TRANSCODE_FPS } from "./args.js";
+import {
+  CALIBRATION_DIR,
+  CALIBRATION_REFERENCE_CLIP,
+  decodeToRawFrames,
+  measureEncodeSlope,
+  runFfmpeg,
+  verifySegmentsDecodeCleanly
+} from "./hwaccel.js";
+import { interpolationErrorOf } from "./throughput.js";
+
+export { throughputAt, interpolationErrorOf } from "./throughput.js";
+
+/**
+ * The sizes a mode is read at, smallest first.
+ *
+ * The smallest is below every frame the ladder produces — its lowest row is
+ * 426x240, and a 4:3 or narrower source gives less area than that at the same
+ * height. The largest is the 2160 row. The two between are the 720 and 1080
+ * rows, where most films are watched. 640x360 is the reference size every
+ * earlier reading was taken at, so the figures stay comparable with them.
+ */
+export const CALIBRATION_FRAMES = Object.freeze([
+  Object.freeze({ width: 256, height: 144 }),
+  Object.freeze({ width: 640, height: 360 }),
+  Object.freeze({ width: 1280, height: 720 }),
+  Object.freeze({ width: 1920, height: 1080 }),
+  Object.freeze({ width: 3840, height: 2160 })
+]);
+
+/** The size the correctness check encodes at, and every earlier reading was taken at. */
+const CHECK_FRAME = Object.freeze({ width: 640, height: 360 });
+
+/**
+ * @typedef {object} SizeReading
+ * @property {number} width
+ * @property {number} height
+ * @property {number} pixelsPerSec
+ *
+ * @typedef {object} CalibratedMode
+ * @property {string} preset - The setting, or the encoder's name where it has one setting.
+ * @property {number} pixelsPerSec - At 640x360, for everything that has always read that figure.
+ * @property {SizeReading[]} bySize - Smallest first.
+ * @property {number | null} interpolationError - The largest measured relative
+ *   error of an interpolation between two readings, or null where it could not
+ *   be measured.
+ * @property {{ averageKbps: number, peakKbps: number } | null} segmentKbps -
+ *   What the correctness check's segments carried.
+ */
+
+/**
+ * The settings a mode is known by, as text, for the log and for the key its
+ * later observations are filed under.
+ *
+ * @param {{ benchmarkArgs: (rung: string | null) => string[] }} encoder
+ * @param {string | null} rung
+ * @returns {string}
+ */
+export function settingsOf(encoder, rung) {
+  return encoder.benchmarkArgs(rung).join(" ");
+}
+
+/**
+ * Encode the calibration clip through the product's own arguments for this
+ * mode, and check every segment decodes on its own.
+ *
+ * @param {{ ffmpegBin: string, encoder: object, rung: string | null, segmentDurationSec: number }} params
+ * @returns {Promise<{ ok: boolean, reason: string, segmentKbps: { averageKbps: number, peakKbps: number } | null }>}
+ */
+export async function checkModeProducesCorrectSegments({ ffmpegBin, encoder, rung, segmentDurationSec }) {
+  let directory;
+  try {
+    directory = mkdtempSync(path.join(os.tmpdir(), "tt-modecheck-"));
+  } catch (error) {
+    return { ok: false, reason: `no writable temp directory (${error instanceof Error ? error.message : String(error)})`, segmentKbps: null };
+  }
+  // Three segments' worth, so at least two are cut and each is checked alone.
+  const seconds = segmentDurationSec * 3;
+  const rateControl = encoder.kind === "software"
+    ? softwareRateControlFor({ ...CHECK_FRAME, fps: TRANSCODE_FPS })
+    : null;
+  const args = [
+    "-hide_banner", "-loglevel", "error",
+    ...encoder.inputArgs,
+    "-stream_loop", "-1",
+    "-i", path.join(CALIBRATION_DIR, CALIBRATION_REFERENCE_CLIP),
+    "-t", String(seconds),
+    "-map", "0:v:0", "-an",
+    ...encoder.buildVideoArgs({
+      targetWidth: CHECK_FRAME.width,
+      targetHeight: CHECK_FRAME.height,
+      segmentDurationSec,
+      preset: rung ?? undefined,
+      fps: TRANSCODE_FPS,
+      tonemap: false,
+      forcedKeyframeTimes: null,
+      rateControl
+    }),
+    "-f", "hls",
+    "-hls_time", String(segmentDurationSec),
+    "-hls_list_size", "0",
+    "-hls_flags", "independent_segments",
+    "-hls_segment_type", "fmp4",
+    "-hls_fmp4_init_filename", "init.mp4",
+    "-hls_segment_filename", path.join(directory, "seg-%03d.m4s"),
+    path.join(directory, "index.m3u8")
+  ];
+  try {
+    const encoded = await runFfmpeg(ffmpegBin, args, 60_000);
+    if (encoded.code !== 0) {
+      const line = encoded.stderr.trim().split(/\r?\n/).pop() ?? "";
+      return { ok: false, reason: `the encode failed (exit ${encoded.code}${line ? `: ${line}` : ""})`, segmentKbps: null };
+    }
+    if (!(await verifySegmentsDecodeCleanly(ffmpegBin, directory))) {
+      return { ok: false, reason: "a segment it produced does not decode on its own", segmentKbps: null };
+    }
+    const sizes = readdirSync(directory)
+      .filter((name) => /^seg-\d+\.m4s$/.test(name))
+      .sort()
+      .map((name) => statSync(path.join(directory, name)).size);
+    // The last segment may be short; only whole ones say what a segment carries.
+    const whole = sizes.slice(0, Math.max(1, sizes.length - 1));
+    const kbps = whole.map((bytes) => (bytes * 8) / segmentDurationSec / 1000);
+    return {
+      ok: true,
+      reason: "",
+      segmentKbps: {
+        averageKbps: kbps.reduce((sum, value) => sum + value, 0) / kbps.length,
+        peakKbps: Math.max(...kbps)
+      }
+    };
+  } finally {
+    try {
+      rmSync(directory, { recursive: true, force: true, maxRetries: 5, retryDelay: 200 });
+    } catch {
+      // A temp directory the operating system will clear.
+    }
+  }
+}
+
+/**
+ * Qualify and measure every selectable mode of one encoder.
+ *
+ * Always resolves. A mode that fails either half is left out, with the reason
+ * logged; an encoder none of whose modes qualify comes back with no modes,
+ * and nothing on this host is then re-encoded with it.
+ *
+ * @param {object} params
+ * @param {string} params.ffmpegBin
+ * @param {object} params.encoder - An `Encoder`.
+ * @param {{ info: (m: string) => void, warn: (m: string) => void }} [params.logger]
+ * @param {number} [params.segmentDurationSec]
+ * @param {Array<{ width: number, height: number }>} [params.frames]
+ * @param {object} [params.measure] - Replaces the three readings, for a check
+ *   that must not run ffmpeg: `check`, `rawFrames`, `speed`.
+ * @returns {Promise<{ modes: CalibratedMode[], refused: Array<{ preset: string, reason: string }> }>}
+ */
+export async function calibrateEncoder({
+  ffmpegBin,
+  encoder,
+  logger,
+  segmentDurationSec = 4,
+  frames = CALIBRATION_FRAMES,
+  measure = null
+}) {
+  const log = logger ?? { info: () => {}, warn: () => {} };
+  const check = measure?.check ?? checkModeProducesCorrectSegments;
+  const rawFrames = measure?.rawFrames ?? ((frame) => decodeToRawFrames(ffmpegBin, log, frame));
+  const speed = measure?.speed ?? ((rung, rawPath, frame) => measureEncodeSlope(ffmpegBin, encoder, rung, rawPath, frame));
+  const release = measure?.release ?? ((rawPath) => {
+    try {
+      rmSync(path.dirname(rawPath), { recursive: true, force: true, maxRetries: 5, retryDelay: 200 });
+    } catch {
+      // A temp directory the operating system will clear.
+    }
+  });
+  const rungs = Array.isArray(encoder.selectableRungs) && encoder.selectableRungs.length > 0
+    ? encoder.selectableRungs
+    : [null];
+  const startedAt = Date.now();
+
+  /** @type {Map<string | null, { ok: boolean, reason: string, segmentKbps: object | null }>} */
+  const checked = new Map();
+  for (const rung of rungs) {
+    const answer = await check({ ffmpegBin, encoder, rung, segmentDurationSec });
+    checked.set(rung, answer);
+    if (!answer.ok) {
+      log.warn(`calibration: ${encoder.name} "${rung ?? "as it comes"}" is not used on this host — ${answer.reason}`);
+    }
+  }
+  const qualified = rungs.filter((rung) => checked.get(rung)?.ok === true);
+
+  /** @type {Map<string | null, SizeReading[]>} */
+  const readings = new Map(qualified.map((rung) => [rung, []]));
+  const sortedFrames = [...frames].sort((left, right) => left.width * left.height - right.width * right.height);
+  for (const frame of sortedFrames) {
+    if (qualified.length === 0) {
+      break;
+    }
+    const rawPath = await rawFrames(frame);
+    if (rawPath === null) {
+      log.warn(`calibration: no frames at ${frame.width}x${frame.height}; ${encoder.name} is not read there or above`);
+      break;
+    }
+    let fastestKeptUp = false;
+    try {
+      // Fastest first: the ladder is slowest first, so walk it backwards.
+      for (let index = qualified.length - 1; index >= 0; index -= 1) {
+        const rung = qualified[index];
+        const realtimes = await speed(rung, rawPath, frame);
+        if (realtimes === null) {
+          log.warn(`calibration: ${encoder.name} "${rung ?? "as it comes"}" gave no reading at ${frame.width}x${frame.height}`);
+          break;
+        }
+        readings.get(rung).push({
+          width: frame.width,
+          height: frame.height,
+          pixelsPerSec: frame.width * frame.height * TRANSCODE_FPS * realtimes
+        });
+        if (index === qualified.length - 1) {
+          fastestKeptUp = realtimes >= 1;
+        }
+        if (realtimes < 1) {
+          // Every slower mode is slower still at this size.
+          break;
+        }
+      }
+    } finally {
+      release(rawPath);
+    }
+    if (!fastestKeptUp) {
+      // Every larger size is larger still.
+      break;
+    }
+  }
+
+  /** @type {CalibratedMode[]} */
+  const modes = [];
+  /** @type {Array<{ preset: string, reason: string }>} */
+  const refused = [];
+  for (const rung of rungs) {
+    const preset = rung ?? encoder.name;
+    if (checked.get(rung)?.ok !== true) {
+      refused.push({ preset, reason: checked.get(rung)?.reason ?? "not checked" });
+      continue;
+    }
+    const bySize = readings.get(rung) ?? [];
+    if (bySize.length === 0) {
+      refused.push({ preset, reason: "no size was read" });
+      continue;
+    }
+    const reference = bySize.find((reading) => reading.width === CHECK_FRAME.width && reading.height === CHECK_FRAME.height) ?? bySize[0];
+    const interpolationError = interpolationErrorOf(bySize);
+    modes.push({
+      preset,
+      pixelsPerSec: reference.pixelsPerSec,
+      bySize,
+      interpolationError,
+      segmentKbps: checked.get(rung).segmentKbps
+    });
+    log.info(
+      `calibration: ${encoder.name} "${preset}" ` +
+      bySize.map((reading) => `${reading.width}x${reading.height}=${(reading.pixelsPerSec / 1e6).toFixed(1)}Mpx/s`).join(" ") +
+      ` interpolation error ${interpolationError === null ? "not measured, used only at the sizes read" : `${(interpolationError * 100).toFixed(1)}%`}` +
+      (checked.get(rung).segmentKbps
+        ? ` segments ${Math.round(checked.get(rung).segmentKbps.averageKbps)}kbps average, ${Math.round(checked.get(rung).segmentKbps.peakKbps)}kbps peak at ${CHECK_FRAME.width}x${CHECK_FRAME.height}`
+        : "")
+    );
+  }
+  log.info(
+    `calibration: ${encoder.name} ${modes.length} of ${rungs.length} mode(s) usable ` +
+    `(${((Date.now() - startedAt) / 1000).toFixed(1)}s)` +
+    (refused.length > 0 ? `; not usable: ${refused.map((one) => `${one.preset} (${one.reason})`).join(", ")}` : "")
+  );
+  return { modes, refused };
+}
+
+/**
+ * What every encoder this proxy may use was measured to do, by kind: the one
+ * detection chose, and software, which is where a failing hardware encoder
+ * falls back to for the rest of the process.
+ */
+export class HostCalibration {
+  /** @type {Map<string, CalibratedMode[]>} */
+  #byKind;
+
+  /**
+   * @param {object} params
+   * @param {Record<string, CalibratedMode[]>} params.byKind
+   * @param {import("./fingerprint.js").HostFingerprint | null} [params.fingerprint]
+   */
+  constructor({ byKind, fingerprint = null }) {
+    this.#byKind = new Map(Object.entries(byKind ?? {}).map(([kind, modes]) => [kind, Array.isArray(modes) ? modes : []]));
+    this.fingerprint = fingerprint;
+  }
+
+  /**
+   * The usable modes of one encoder kind, slowest first — the shape the offer
+   * and the preset choice have always read. Null where that kind was not
+   * calibrated at all.
+   *
+   * @param {string | null | undefined} kind
+   * @returns {CalibratedMode[] | null}
+   */
+  modesFor(kind) {
+    return kind && this.#byKind.has(kind) ? this.#byKind.get(kind) : null;
+  }
+
+  /**
+   * Every kind that was calibrated.
+   *
+   * @returns {string[]}
+   */
+  kinds() {
+    return [...this.#byKind.keys()];
+  }
+}