@torrent-tv/proxy 2.87.10 → 2.87.12

package/services/media/ffmpeg-banner.js

@@ -1,260 +1,260 @@
-/**
- * @file ffmpeg banner parsers.
- *
- * Pure helpers that extract media info from the ffmpeg `-i` stderr banner
- * (printed before any decoding): duration, start time, video resolution,
- * frame rate and HDR transfer. Shared by the playback planner (which runs the
- * codec probe) and the HLS session manager (which needs the same fields when
- * building a session), so a session can reuse the planner's probe instead of
- * running a second ffmpeg scan of the same input.
- */
-
-/**
- * Extract the total duration in seconds from ffmpeg stderr output.
- * Returns `null` if the duration line is absent or unparseable.
- *
- * @param {string} stderrText
- * @returns {number | null}
- */
-export function parseFfmpegDurationSeconds(stderrText) {
-  if (typeof stderrText !== "string" || stderrText.length === 0) {
-    return null;
-  }
-  const match = stderrText.match(/Duration:\s*(\d+):(\d+):(\d+(?:\.\d+)?)/i);
-  if (!match) {
-    return null;
-  }
-  const hours = Number(match[1]);
-  const minutes = Number(match[2]);
-  const seconds = Number(match[3]);
-  if (![hours, minutes, seconds].every((item) => Number.isFinite(item))) {
-    return null;
-  }
-  return hours * 3600 + minutes * 60 + seconds;
-}
-
-/**
- * Parse the container start time (seconds) from ffmpeg's "Duration: …, start:
- * X, …" line. Many MKVs report a small non-zero start (e.g. 0.1 s); preserving
- * it via `-copyts` would put a hole at the beginning, so we normalize it away.
- * Returns 0 when absent.
- *
- * @param {string} stderrText
- * @returns {number}
- */
-export function parseFfmpegStartTimeSeconds(stderrText) {
-  if (typeof stderrText !== "string" || stderrText.length === 0) {
-    return 0;
-  }
-  const match = stderrText.match(/Duration:[^\n]*?start:\s*(-?\d+(?:\.\d+)?)/i);
-  if (!match) {
-    return 0;
-  }
-  const value = Number(match[1]);
-  return Number.isFinite(value) ? value : 0;
-}
-
-/**
- * Parse the bitrate (kbit/s) that the decode cost is priced from: the VIDEO
- * stream's own, falling back to the container's when the stream does not state
- * one. Returns null when neither is present.
- *
- * The distinction is not cosmetic. The calibration clips carry video alone and
- * are decoded with `-an`, so the fitted bitrate term describes VIDEO bits; the
- * container figure adds every audio and subtitle track. A Russian release with
- * two or three AC-3/DTS tracks carries 1-2 Mbit/s of audio, and on this host's
- * own fit that inflates the predicted decode cost by 10-25 % — refusing rungs
- * on the strength of audio the benchmark never decoded. And the term is not the
- * weak one it was once described as: on the shipped clips an 11.7× bitrate
- * change moved the cost 2.47×, and it accounts for about two thirds of the
- * predicted cost of a high-bitrate 1080p source.
- *
- * @param {string} stderrText
- * @returns {number | null}
- */
-export function parseFfmpegBitrateKbps(stderrText) {
-  if (typeof stderrText !== "string" || stderrText.length === 0) {
-    return null;
-  }
-  // `Stream #0:0 … Video: h264 … 11375 kb/s, 24 fps` — the stream's own rate,
-  // stated per stream and therefore free of the other tracks. Only the INPUT
-  // section is read: everything from "Stream mapping:" onwards describes what
-  // ffmpeg is about to produce, and that line carries a bitrate of its own.
-  const inputSection = stderrText.split(/^Stream mapping:/m)[0];
-  const perStream = inputSection.match(/Stream\s+#[^\n]*?Video:[^\n]*?,\s*(\d+)\s*kb\/s/i);
-  if (perStream) {
-    const streamValue = Number(perStream[1]);
-    if (Number.isFinite(streamValue) && streamValue > 0) {
-      return streamValue;
-    }
-  }
-  const match = stderrText.match(/Duration:[^\n]*?bitrate:\s*(\d+)\s*kb\/s/i);
-  if (!match) {
-    return null;
-  }
-  const value = Number(match[1]);
-  return Number.isFinite(value) && value > 0 ? value : null;
-}
-
-/**
- * Parse the source video resolution from ffmpeg's stderr (the "Stream … Video:
- * … WxH" line). Returns `{ width: null, height: null }` when absent.
- *
- * @param {string} stderrText
- * @returns {{ width: number | null, height: number | null }}
- */
-export function parseFfmpegVideoDimensions(stderrText) {
-  if (typeof stderrText !== "string" || stderrText.length === 0) {
-    return { width: null, height: null };
-  }
-  const match = stderrText.match(/Video:[^\n]*?\b(\d{2,5})x(\d{2,5})\b/i);
-  if (!match) {
-    return { width: null, height: null };
-  }
-  const width = Number(match[1]);
-  const height = Number(match[2]);
-  return {
-    width: Number.isFinite(width) && width > 0 ? width : null,
-    height: Number.isFinite(height) && height > 0 ? height : null
-  };
-}
-
-/**
- * Count the streams the source declares, by type, from ffmpeg's banner
- * ("Stream #0:3(rus): Audio: ac3 …").
- *
- * Every `-map` this proxy builds carries the `?` suffix, which tells ffmpeg to
- * drop the mapping silently when the stream is absent instead of refusing. Map
- * every stream of a run away that way and the output is left with nothing in
- * it, which ffmpeg reports as `Output file does not contain any stream` and
- * exit 255 — three sessions died that way on 2026-08-26 and the log held only
- * the exit code. What separates "we asked for a track that is not there" from
- * every other cause of 255 is this count, so it is read once, with the rest of
- * the banner, and kept for the failure to quote.
- *
- * @param {string} stderrText
- * @returns {{ video: number, audio: number, subtitle: number, other: number } | null}
- *   Null when the banner carried no stream lines at all — which is itself
- *   different from a file that genuinely has none.
- */
-export function parseFfmpegStreamCounts(stderrText) {
-  if (typeof stderrText !== "string" || stderrText.length === 0) {
-    return null;
-  }
-  const lines = stderrText.match(/^\s*Stream #\d+:\d+.*$/gim);
-  if (!lines || lines.length === 0) {
-    return null;
-  }
-  const counts = { video: 0, audio: 0, subtitle: 0, other: 0 };
-  for (const line of lines) {
-    // The type follows the stream's id and its optional language/metadata:
-    // "Stream #0:1(eng): Audio: aac". Attached pictures also announce
-    // themselves as Video, and they are counted as such deliberately — that is
-    // exactly what `0:v:0?` would map, and a cover image mapped as the picture
-    // is one of the ways a run ends up producing nothing anyone can watch.
-    const match = line.match(/Stream #\d+:\d+(?:\[[^\]]*\])?(?:\([^)]*\))?:\s*(\w+)/i);
-    const kind = match ? match[1].toLowerCase() : "";
-    if (kind === "video") {
-      counts.video += 1;
-    } else if (kind === "audio") {
-      counts.audio += 1;
-    } else if (kind === "subtitle") {
-      counts.subtitle += 1;
-    } else {
-      counts.other += 1;
-    }
-  }
-  return counts;
-}
-
-/**
- * Parse the source frame rate from the ffmpeg "Video:" line
- * (e.g. "… 23.98 fps," / "… 25 fps,"). Returns null when absent.
- *
- * @param {string} stderrText
- * @returns {number | null}
- */
-export function parseFfmpegVideoFps(stderrText) {
-  if (typeof stderrText !== "string" || stderrText.length === 0) {
-    return null;
-  }
-  const videoLine = stderrText.match(/Video:[^\n]*/i);
-  if (!videoLine) {
-    return null;
-  }
-  const match = videoLine[0].match(/([\d.]+)\s*fps/i);
-  if (!match) {
-    return null;
-  }
-  const value = Number(match[1]);
-  return Number.isFinite(value) && value > 0 ? value : null;
-}
-
-/**
- * Detect an HDR / wide-gamut source from the ffmpeg "Video:" line's colour
- * metadata. HDR is identified by the transfer function — `smpte2084` (PQ /
- * HDR10) or `arib-std-b67` (HLG). Re-encoding such a source to 8-bit SDR
- * without tone mapping produces a washed-out, desaturated picture, so this
- * gates the tonemap filter chain.
- *
- * @param {string} stderrText
- * @returns {boolean}
- */
-export function parseFfmpegHdr(stderrText) {
-  if (typeof stderrText !== "string" || stderrText.length === 0) {
-    return false;
-  }
-  const videoLine = stderrText.match(/Video:[^\n]*/i);
-  if (!videoLine) {
-    return false;
-  }
-  // ffmpeg prints the colour info in parentheses, e.g.
-  // "yuv420p10le(tv, bt2020nc/bt2020/smpte2084)". The transfer (last token) is
-  // the reliable HDR signal.
-  return /\b(smpte2084|arib-std-b67|arib_std_b67)\b/i.test(videoLine[0]);
-}
-
-/**
- * How many bits per sample the video carries, from the pixel format ffmpeg
- * prints on its `Video:` line.
- *
- * This is a decode-cost input, not a colour one: a 10-bit stream holds wider
- * samples and is decoded with wider arithmetic, and how much that costs is a
- * property of the machine. It is therefore its own calibration family rather
- * than a multiplier on the 8-bit one.
- *
- * ffmpeg names the depth in the format itself — `yuv420p10le`, `yuv420p12le`,
- * `p010le` — and omits it at 8 bits (`yuv420p`, `nv12`). An unreadable line
- * gives null, and the caller then prices the source as 8-bit, which is what
- * every source was priced as before this existed.
- *
- * @param {string} stderrText
- * @returns {number | null}
- */
-export function parseFfmpegBitDepth(stderrText) {
-  if (typeof stderrText !== "string" || stderrText.length === 0) {
-    return null;
-  }
-  const videoLine = stderrText.match(/Video:[^\n]*/i);
-  if (!videoLine) {
-    return null;
-  }
-  // The pixel format is the token after the codec and its tag, and the depth
-  // rides on its name. `p010`/`p016` are the two that state it without a `p`
-  // separator, and they are 10 and 16 bits.
-  const named = videoLine[0].match(/\byuv[a-z0-9]*?p(\d{1,2})(?:le|be)\b/i);
-  if (named) {
-    const depth = Number(named[1]);
-    return Number.isFinite(depth) && depth >= 8 ? depth : null;
-  }
-  if (/\bp010(?:le|be)?\b/i.test(videoLine[0])) {
-    return 10;
-  }
-  if (/\bp016(?:le|be)?\b/i.test(videoLine[0])) {
-    return 16;
-  }
-  if (/\byuv[a-z0-9]*p\b|\bnv12\b|\bnv21\b|\bgbrp\b/i.test(videoLine[0])) {
-    return 8;
-  }
-  return null;
-}
+/**
+ * @file ffmpeg banner parsers.
+ *
+ * Pure helpers that extract media info from the ffmpeg `-i` stderr banner
+ * (printed before any decoding): duration, start time, video resolution,
+ * frame rate and HDR transfer. Shared by the playback planner (which runs the
+ * codec probe) and the HLS session manager (which needs the same fields when
+ * building a session), so a session can reuse the planner's probe instead of
+ * running a second ffmpeg scan of the same input.
+ */
+
+/**
+ * Extract the total duration in seconds from ffmpeg stderr output.
+ * Returns `null` if the duration line is absent or unparseable.
+ *
+ * @param {string} stderrText
+ * @returns {number | null}
+ */
+export function parseFfmpegDurationSeconds(stderrText) {
+  if (typeof stderrText !== "string" || stderrText.length === 0) {
+    return null;
+  }
+  const match = stderrText.match(/Duration:\s*(\d+):(\d+):(\d+(?:\.\d+)?)/i);
+  if (!match) {
+    return null;
+  }
+  const hours = Number(match[1]);
+  const minutes = Number(match[2]);
+  const seconds = Number(match[3]);
+  if (![hours, minutes, seconds].every((item) => Number.isFinite(item))) {
+    return null;
+  }
+  return hours * 3600 + minutes * 60 + seconds;
+}
+
+/**
+ * Parse the container start time (seconds) from ffmpeg's "Duration: …, start:
+ * X, …" line. Many MKVs report a small non-zero start (e.g. 0.1 s); preserving
+ * it via `-copyts` would put a hole at the beginning, so we normalize it away.
+ * Returns 0 when absent.
+ *
+ * @param {string} stderrText
+ * @returns {number}
+ */
+export function parseFfmpegStartTimeSeconds(stderrText) {
+  if (typeof stderrText !== "string" || stderrText.length === 0) {
+    return 0;
+  }
+  const match = stderrText.match(/Duration:[^\n]*?start:\s*(-?\d+(?:\.\d+)?)/i);
+  if (!match) {
+    return 0;
+  }
+  const value = Number(match[1]);
+  return Number.isFinite(value) ? value : 0;
+}
+
+/**
+ * Parse the bitrate (kbit/s) that the decode cost is priced from: the VIDEO
+ * stream's own, falling back to the container's when the stream does not state
+ * one. Returns null when neither is present.
+ *
+ * The distinction is not cosmetic. The calibration clips carry video alone and
+ * are decoded with `-an`, so the fitted bitrate term describes VIDEO bits; the
+ * container figure adds every audio and subtitle track. A Russian release with
+ * two or three AC-3/DTS tracks carries 1-2 Mbit/s of audio, and on this host's
+ * own fit that inflates the predicted decode cost by 10-25 % — refusing rungs
+ * on the strength of audio the benchmark never decoded. And the term is not the
+ * weak one it was once described as: on the shipped clips an 11.7× bitrate
+ * change moved the cost 2.47×, and it accounts for about two thirds of the
+ * predicted cost of a high-bitrate 1080p source.
+ *
+ * @param {string} stderrText
+ * @returns {number | null}
+ */
+export function parseFfmpegBitrateKbps(stderrText) {
+  if (typeof stderrText !== "string" || stderrText.length === 0) {
+    return null;
+  }
+  // `Stream #0:0 … Video: h264 … 11375 kb/s, 24 fps` — the stream's own rate,
+  // stated per stream and therefore free of the other tracks. Only the INPUT
+  // section is read: everything from "Stream mapping:" onwards describes what
+  // ffmpeg is about to produce, and that line carries a bitrate of its own.
+  const inputSection = stderrText.split(/^Stream mapping:/m)[0];
+  const perStream = inputSection.match(/Stream\s+#[^\n]*?Video:[^\n]*?,\s*(\d+)\s*kb\/s/i);
+  if (perStream) {
+    const streamValue = Number(perStream[1]);
+    if (Number.isFinite(streamValue) && streamValue > 0) {
+      return streamValue;
+    }
+  }
+  const match = stderrText.match(/Duration:[^\n]*?bitrate:\s*(\d+)\s*kb\/s/i);
+  if (!match) {
+    return null;
+  }
+  const value = Number(match[1]);
+  return Number.isFinite(value) && value > 0 ? value : null;
+}
+
+/**
+ * Parse the source video resolution from ffmpeg's stderr (the "Stream … Video:
+ * … WxH" line). Returns `{ width: null, height: null }` when absent.
+ *
+ * @param {string} stderrText
+ * @returns {{ width: number | null, height: number | null }}
+ */
+export function parseFfmpegVideoDimensions(stderrText) {
+  if (typeof stderrText !== "string" || stderrText.length === 0) {
+    return { width: null, height: null };
+  }
+  const match = stderrText.match(/Video:[^\n]*?\b(\d{2,5})x(\d{2,5})\b/i);
+  if (!match) {
+    return { width: null, height: null };
+  }
+  const width = Number(match[1]);
+  const height = Number(match[2]);
+  return {
+    width: Number.isFinite(width) && width > 0 ? width : null,
+    height: Number.isFinite(height) && height > 0 ? height : null
+  };
+}
+
+/**
+ * Count the streams the source declares, by type, from ffmpeg's banner
+ * ("Stream #0:3(rus): Audio: ac3 …").
+ *
+ * Every `-map` this proxy builds carries the `?` suffix, which tells ffmpeg to
+ * drop the mapping silently when the stream is absent instead of refusing. Map
+ * every stream of a run away that way and the output is left with nothing in
+ * it, which ffmpeg reports as `Output file does not contain any stream` and
+ * exit 255 — three sessions died that way on 2026-08-26 and the log held only
+ * the exit code. What separates "we asked for a track that is not there" from
+ * every other cause of 255 is this count, so it is read once, with the rest of
+ * the banner, and kept for the failure to quote.
+ *
+ * @param {string} stderrText
+ * @returns {{ video: number, audio: number, subtitle: number, other: number } | null}
+ *   Null when the banner carried no stream lines at all — which is itself
+ *   different from a file that genuinely has none.
+ */
+export function parseFfmpegStreamCounts(stderrText) {
+  if (typeof stderrText !== "string" || stderrText.length === 0) {
+    return null;
+  }
+  const lines = stderrText.match(/^\s*Stream #\d+:\d+.*$/gim);
+  if (!lines || lines.length === 0) {
+    return null;
+  }
+  const counts = { video: 0, audio: 0, subtitle: 0, other: 0 };
+  for (const line of lines) {
+    // The type follows the stream's id and its optional language/metadata:
+    // "Stream #0:1(eng): Audio: aac". Attached pictures also announce
+    // themselves as Video, and they are counted as such deliberately — that is
+    // exactly what `0:v:0?` would map, and a cover image mapped as the picture
+    // is one of the ways a run ends up producing nothing anyone can watch.
+    const match = line.match(/Stream #\d+:\d+(?:\[[^\]]*\])?(?:\([^)]*\))?:\s*(\w+)/i);
+    const kind = match ? match[1].toLowerCase() : "";
+    if (kind === "video") {
+      counts.video += 1;
+    } else if (kind === "audio") {
+      counts.audio += 1;
+    } else if (kind === "subtitle") {
+      counts.subtitle += 1;
+    } else {
+      counts.other += 1;
+    }
+  }
+  return counts;
+}
+
+/**
+ * Parse the source frame rate from the ffmpeg "Video:" line
+ * (e.g. "… 23.98 fps," / "… 25 fps,"). Returns null when absent.
+ *
+ * @param {string} stderrText
+ * @returns {number | null}
+ */
+export function parseFfmpegVideoFps(stderrText) {
+  if (typeof stderrText !== "string" || stderrText.length === 0) {
+    return null;
+  }
+  const videoLine = stderrText.match(/Video:[^\n]*/i);
+  if (!videoLine) {
+    return null;
+  }
+  const match = videoLine[0].match(/([\d.]+)\s*fps/i);
+  if (!match) {
+    return null;
+  }
+  const value = Number(match[1]);
+  return Number.isFinite(value) && value > 0 ? value : null;
+}
+
+/**
+ * Detect an HDR / wide-gamut source from the ffmpeg "Video:" line's colour
+ * metadata. HDR is identified by the transfer function — `smpte2084` (PQ /
+ * HDR10) or `arib-std-b67` (HLG). Re-encoding such a source to 8-bit SDR
+ * without tone mapping produces a washed-out, desaturated picture, so this
+ * gates the tonemap filter chain.
+ *
+ * @param {string} stderrText
+ * @returns {boolean}
+ */
+export function parseFfmpegHdr(stderrText) {
+  if (typeof stderrText !== "string" || stderrText.length === 0) {
+    return false;
+  }
+  const videoLine = stderrText.match(/Video:[^\n]*/i);
+  if (!videoLine) {
+    return false;
+  }
+  // ffmpeg prints the colour info in parentheses, e.g.
+  // "yuv420p10le(tv, bt2020nc/bt2020/smpte2084)". The transfer (last token) is
+  // the reliable HDR signal.
+  return /\b(smpte2084|arib-std-b67|arib_std_b67)\b/i.test(videoLine[0]);
+}
+
+/**
+ * How many bits per sample the video carries, from the pixel format ffmpeg
+ * prints on its `Video:` line.
+ *
+ * This is a decode-cost input, not a colour one: a 10-bit stream holds wider
+ * samples and is decoded with wider arithmetic, and how much that costs is a
+ * property of the machine. It is therefore its own calibration family rather
+ * than a multiplier on the 8-bit one.
+ *
+ * ffmpeg names the depth in the format itself — `yuv420p10le`, `yuv420p12le`,
+ * `p010le` — and omits it at 8 bits (`yuv420p`, `nv12`). An unreadable line
+ * gives null, and the caller then prices the source as 8-bit, which is what
+ * every source was priced as before this existed.
+ *
+ * @param {string} stderrText
+ * @returns {number | null}
+ */
+export function parseFfmpegBitDepth(stderrText) {
+  if (typeof stderrText !== "string" || stderrText.length === 0) {
+    return null;
+  }
+  const videoLine = stderrText.match(/Video:[^\n]*/i);
+  if (!videoLine) {
+    return null;
+  }
+  // The pixel format is the token after the codec and its tag, and the depth
+  // rides on its name. `p010`/`p016` are the two that state it without a `p`
+  // separator, and they are 10 and 16 bits.
+  const named = videoLine[0].match(/\byuv[a-z0-9]*?p(\d{1,2})(?:le|be)\b/i);
+  if (named) {
+    const depth = Number(named[1]);
+    return Number.isFinite(depth) && depth >= 8 ? depth : null;
+  }
+  if (/\bp010(?:le|be)?\b/i.test(videoLine[0])) {
+    return 10;
+  }
+  if (/\bp016(?:le|be)?\b/i.test(videoLine[0])) {
+    return 16;
+  }
+  if (/\byuv[a-z0-9]*p\b|\bnv12\b|\bnv21\b|\bgbrp\b/i.test(videoLine[0])) {
+    return 8;
+  }
+  return null;
+}