@things-factory/figure-ui 10.1.82 → 10.1.84

package/test/resize-with-placement.test.ts

@@ -45,8 +45,8 @@ for (const mode of ['floor', 'ceiling', 'wall', 'center'] as const) {
     /* At twice the height the kept face is where it was. */
     const asset = parseFigureAsset(session.source())
     asset.designInputs['size.y'] = asset.designInputs['size.y']! * 2
-    const g = compileFigureAsset(asset).evaluate().geometry.find(g => g.id === 'box')! as unknown as { pose: { t: number[] }; shape: { dimensions: { height: number } } }
-    const y = g.pose.t[1]!, h = g.shape.dimensions.height
+    const g = compileFigureAsset(asset).evaluate().geometry.find(g => g.id === 'box')! as unknown as { pose: { t: number[] }; shape: { dimensions: Record<string, number> } }
+    const y = g.pose.t[1]!, h = g.shape.dimensions.length!
     if (mode === 'floor') assert.equal(y - h / 2, 0)
     if (mode === 'ceiling') assert.equal(y + h / 2, 0)
     if (mode === 'center') assert.equal(y, 50)
@@ -81,7 +81,7 @@ test('fresh, width only, and all set back to fixed are three different answers',
   const resized = applyFigureProposal(a, planFigureResize(a, { part: 'box', axes: only.axes }).steps)
   for (const axis of ['y', 'z'] as const) assert.equal(figureFollowOf(resized, 'box', axis).of, 'own', `${axis} stays fixed`)
   const g = compileFigureAsset({ ...resized, designInputs: { ...resized.designInputs, 'size.x': 200, 'size.y': 400, 'size.z': 400 } }).evaluate().geometry.find(g => g.id === 'box') as unknown as { shape: { dimensions: Record<string, number> }; pose: { t: number[] } }
-  assert.deepEqual(g.shape.dimensions, { width: 200, height: 100, depth: 100 })
+  assert.deepEqual([g.shape.dimensions['size.x'], g.shape.dimensions.length, g.shape.dimensions['size.z']], [200, 100, 100], 'width 200; height and depth kept')
   assert.equal(g.pose.t[1]! - 50, 0, 'and it stands on the floor')
   /* All set back to fixed: nothing is taken for "all". */
   let fixed = applyFigureAuthoring(a, { kind: 'follow-size', part: 'box', axes: ['x'] })
@@ -91,23 +91,23 @@ test('fresh, width only, and all set back to fixed are three different answers',
   const following = applyFigureAuthoring(a, { kind: 'follow-size', part: 'box', axes: ['y'] })
   assert.deepEqual(resizeAxesOf(following, 'box'), { axes: ['y'], basis: 'chosen' })
   assert.deepEqual(resizeAxesOf(following, 'box', ['x']), { axes: ['x', 'y'], basis: 'chosen' })
-  /* The screen: the button passes the axes, the button names its scope, and "none" disables it. */
+  /* The screen: size response is no longer a disguised placement command. */
   const links = readFileSync(new URL('../client/modeller/figure-links.ts', import.meta.url), 'utf-8')
-  assert.ok(links.includes("detail: { request: { part: this.partId, axes, ...(gap ? { gap } : {}) } }"))
-  assert.ok(links.includes("i18next.t('figure.button.resize-scoped-' + mode, { scope })"))
-  assert.ok(links.includes("?disabled=${choice.basis === 'none'"))
-  assert.ok(links.includes('this.pendingAxes = { ...this.pendingAxes, [this.partId]: axes.filter(one => one !== axis) }'), 'set back to fixed is remembered as a choice')
+  const dimensions = links.slice(links.indexOf('  private renderDimensions('), links.indexOf('  /** The same source'))
+  assert.ok(dimensions.includes("this.command({ kind: 'follow-size', part: this.partId })"))
+  assert.ok(!dimensions.includes('resize-with-placement'), 'size response does not attach the part')
+  assert.ok(!links.includes('figure.label.stands-on-plane'), 'the attachment form does not present a model-placement toggle')
   const ko = JSON.parse(readFileSync(new URL('../translations/ko.json', import.meta.url), 'utf-8'))
-  assert.equal(ko['figure.text.resize-scope-all-3'], '세 방향 모두')
+  assert.equal(ko['figure.button.follow-size'], '모델 크기에 맞추기')
 })
 
-test('a part off the floor is offered both, with the distance: keep the gap, or be brought onto the floor', () => {
+test('a part off the floor is not moved by choosing its size response', () => {
   let a = addFigureBox(createFigureAsset('UX'), { id: 'shelf', size: { x: 400, y: 40, z: 300 }, position: { x: 0, y: 520, z: 0 } })
   a = applyFigureAuthoring(a, { kind: 'declare-occupancy', proposal: proposeFigureOccupancy(a), placement: 'floor' })
   const asked = planFigureResize(a, { part: 'shelf', axes: resizeAxesOf(a, 'shelf').axes })
   assert.deepEqual([asked.refusal?.code, asked.refusal?.mm], ['GAP_CHOICE', 500])
   const links = readFileSync(new URL('../client/modeller/figure-links.ts', import.meta.url), 'utf-8')
-  assert.ok(links.includes("@click=${() => ask('keep')}") && links.includes("@click=${() => ask('plane')}"), 'two buttons, each a choice')
+  assert.ok(!links.includes("@click=${() => ask('keep')}"), 'the UI does not offer a size command that also moves the part')
 })
 
 test('a field only the room reads is taken out of the part\'s position row and shown apart', () => {
@@ -164,10 +164,11 @@ test('a fastened part keeps its position and turn rows, with the numbers the rul
   assert.ok(!editor.includes('value="—" disabled'), 'not a blank')
 })
 
-test('after "follow size, attached" the part says what holds it, not a refusal', () => {
+test('size response and attachment are separate screen paths', () => {
   const links = readFileSync(new URL('../client/modeller/figure-links.ts', import.meta.url), 'utf-8')
-  assert.ok(links.includes('? this.renderHeld(asset)'))
-  assert.ok(!links.includes("<p hint resize-held>${i18next.t('figure.text.resize-refused-held'"))
+  assert.ok(links.includes('figure.button.fasten-start'))
+  assert.ok(links.includes('figure.label.target-part-placeholder'))
+  assert.ok(!links.includes('? this.renderHeld(asset)'))
   const ko = JSON.parse(readFileSync(new URL('../translations/ko.json', import.meta.url), 'utf-8'))
   assert.equal(ko['figure.text.held-on-plane'].replace('{face}', '아랫면').replace('{place}', '바닥').replace('{gap}', '0'), '아랫면을 바닥에 유지 중 (간격 0 mm)')
 })

package/test/scene-canvas.test.ts

@@ -12,6 +12,7 @@ import { fileURLToPath } from 'node:url'
 
 import { changedKeys, componentOf, gizmoResultOf } from '../client/modeller/stage-model.ts'
 import type { FigureRenderPart } from '../client/modeller/renderer.ts'
+import { boxShape } from '../client/modeller/drawn-shapes.ts'
 
 const read = (path: string) => readFileSync(fileURLToPath(new URL(path, import.meta.url)), 'utf8')
 const canvas = read('../client/modeller/canvas.ts')
@@ -27,7 +28,7 @@ const turned = (deg: number) => {
 }
 const box = (t: number[], r = turned(0)): FigureRenderPart => ({
   id: 'block',
-  shape: { provider: 'box', dimensions: { width: 200, height: 100, depth: 60 } },
+  shape: boxShape(200, 100, 60),
   pose: { r, t },
   material: { token: 'palette.primary' }
 })

package/test/section-panel.test.ts

@@ -0,0 +1,93 @@
+/*
+ * **단면 칸 — 모서리와 속 공간** (ADR-0100 1단계, 2026-09-29).
+ *
+ * 칸이 보내는 명령이 figure-model 에서 정말로 받아들여져 그려지는 몸체를 바꾸는지, 받아들여지지 않을 때 화면이 그 까닭을
+ * 사람의 말로 하는지를 잰다.
+ */
+import { test } from 'node:test'
+import assert from 'node:assert/strict'
+import { readFileSync } from 'node:fs'
+import { fileURLToPath } from 'node:url'
+
+import { addFigureBox, applyFigureAuthoring, compileFigureAsset, createFigureAsset } from '@hatiolab/figure-model'
+import type { FigureAsset, FigureEvaluatedShape } from '@hatiolab/figure-model'
+
+import { cavityRequestOf, defaultWallOf } from '../client/modeller/section-controls.ts'
+import { editRefusalOf } from '../client/modeller/refusals.ts'
+
+const read = (path: string) => readFileSync(fileURLToPath(new URL(path, import.meta.url)), 'utf8')
+const panel = read('../client/modeller/figure-section-panel.ts')
+const editor = read('../client/modeller/editor.ts')
+const ko = JSON.parse(read('../translations/ko.json')) as Record<string, string>
+
+const probe = () => addFigureBox(createFigureAsset('Probe'), { id: 'body', size: { x: 400, y: 200, z: 300 }, position: { x: 0, y: 100, z: 0 } })
+const shapeOf = (asset: FigureAsset, id = 'body') =>
+  (compileFigureAsset(asset).evaluate().geometry.find(g => (g as { id: string }).id === id) as unknown as { shape: FigureEvaluatedShape }).shape
+const say = (key: string, params: Record<string, string>) => Object.entries(params).reduce((s, [k, v]) => s.replace(`{${k}}`, v), ko[key] ?? key)
+const refusal = (run: () => unknown) => {
+  try {
+    run()
+  } catch (error) {
+    return editRefusalOf(error, say)
+  }
+  assert.fail('the command was taken')
+}
+
+test('모서리 반지름은 네 모서리를 한 값으로 둥글게 하고, 0 은 둥글림을 없앤다', () => {
+  const round = applyFigureAuthoring(probe(), { kind: 'set-section-corner', part: 'body', corner: 40 })
+  const shape = shapeOf(round)
+  assert.deepEqual(shape.extrusion!.section, { kind: 'rectangle', size: { x: 400, z: 300 }, corner: { x: 40, z: 40 } })
+  const sharp = applyFigureAuthoring(round, { kind: 'set-section-corner', part: 'body', corner: null })
+  assert.equal(shapeOf(sharp).extrusion!.section.kind, 'rectangle')
+  assert.equal('corner' in shapeOf(sharp).extrusion!.section, false)
+  assert.match(panel, /corner: value > 0 \? value : null/, 'the field sends 0 as no rounding')
+})
+
+test('속을 비우면 기본 벽·막힌 바닥·열린 윗면의 쟁반이 되고, 끝과 벽을 하나씩 바꾼다', () => {
+  const before = shapeOf(probe())
+  assert.equal(defaultWallOf(before), 30, 'a tenth of the narrower side (300)')
+  const tray = applyFigureAuthoring(probe(), { kind: 'set-cavity', part: 'body', cavity: cavityRequestOf(before) })
+  const shape = shapeOf(tray)
+  assert.deepEqual(shape.cavity!.start, { closed: 30 })
+  assert.equal(shape.cavity!.end, 'open')
+  assert.deepEqual(Object.values(shape.cavity!.wall), [30, 30, 30, 30])
+  const thin = applyFigureAuthoring(tray, { kind: 'set-cavity', part: 'body', cavity: cavityRequestOf(shape, { wall: 5 }) })
+  assert.deepEqual(Object.values(shapeOf(thin).cavity!.wall), [5, 5, 5, 5])
+  assert.deepEqual(shapeOf(thin).cavity!.start, { closed: 30 }, 'the ends stay as they were')
+  const lidded = applyFigureAuthoring(thin, { kind: 'set-cavity', part: 'body', cavity: cavityRequestOf(shapeOf(thin), { end: { closed: 8 } }) })
+  assert.deepEqual(shapeOf(lidded).cavity!.end, { closed: 8 })
+  const solid = applyFigureAuthoring(lidded, { kind: 'set-cavity', part: 'body', cavity: null })
+  assert.equal(shapeOf(solid).cavity, undefined)
+})
+
+test('벽이 단면을 다 채우거나 모서리가 변의 절반을 넘으면, 그 까닭을 말로 한다', () => {
+  const tray = applyFigureAuthoring(probe(), { kind: 'set-cavity', part: 'body', cavity: cavityRequestOf(shapeOf(probe())) })
+  assert.equal(
+    refusal(() => applyFigureAuthoring(tray, { kind: 'set-cavity', part: 'body', cavity: cavityRequestOf(shapeOf(tray), { wall: 150 }) })),
+    ko['figure.text.section-wall-too-thick']
+  )
+  assert.equal(
+    refusal(() => applyFigureAuthoring(tray, { kind: 'set-cavity', part: 'body', cavity: cavityRequestOf(shapeOf(tray), { start: { closed: 120 }, end: { closed: 90 } }) })),
+    ko['figure.text.section-ends-too-thick']
+  )
+  assert.equal(refusal(() => applyFigureAuthoring(probe(), { kind: 'set-section-corner', part: 'body', corner: 160 })), ko['figure.text.section-corner-too-large'])
+})
+
+test('편집기는 단면 칸의 명령을 세션의 이력 하나로 돌리고, 칸은 둥글린 사각·타원 단면에만 선다', () => {
+  assert.match(editor, /<figure-section-panel[\s\S]*?@command=\$\{\(e: CustomEvent\) => this\.linkCommand\(e\.detail\.action\)\}/)
+  assert.match(panel, /if \(kind !== 'rectangle' && kind !== 'ellipse'\) return nothing/)
+  for (const lang of ['ko', 'en', 'ja', 'zh', 'ms']) {
+    const words = JSON.parse(read(`../translations/${lang}.json`)) as Record<string, string>
+    const used = [...new Set([...panel.matchAll(/'(figure\.(?:label|text)\.section-[\w-]+|figure\.label\.group-section)'/g)].map(m => m[1]!))]
+    assert.ok(used.length >= 8)
+    for (const key of used) assert.ok(words[key], `${lang} has ${key}`)
+  }
+})
+
+test('붙어 있는 것이 기대는 면을 없애는 편집은 거절되고, 그 면을 사람의 말로 부른다', () => {
+  let asset = applyFigureAuthoring(probe(), { kind: 'set-cavity', part: 'body', cavity: { wall: 10, start: { closed: 15 }, end: 'open' } })
+  asset = addFigureBox(asset, { id: 'divider', size: { x: 10, y: 100, z: 200 }, position: { x: 0, y: 0, z: 0 } })
+  asset = applyFigureAuthoring(asset, { kind: 'attach', part: 'divider', face: 'bottom', to: { part: 'body', face: 'inside-bottom' as never } })
+  const said = refusal(() => applyFigureAuthoring(asset, { kind: 'set-cavity', part: 'body', cavity: { wall: 10, start: 'open', end: 'open' } }))
+  assert.equal(said, say('figure.text.section-face-in-use', { faces: ko['figure.label.face-inside-bottom']! }))
+})

package/translations/en.json

@@ -188,6 +188,19 @@
   "figure.label.palette-token": "palette token",
   "figure.label.part": "part",
   "figure.label.part-material": "material",
+  "figure.label.group-section": "section",
+  "figure.label.section-corner": "corner radius",
+  "figure.text.section-corner-differs": "differs by axis",
+  "figure.label.section-cavity": "hollow",
+  "figure.label.section-wall": "wall thickness",
+  "figure.text.section-wall-differs": "differs by side",
+  "figure.label.section-end-closed": "closed",
+  "figure.label.section-end-open": "open",
+  "figure.text.section-face-in-use": "Not changed: something is attached to {faces}. Detach it first.",
+  "figure.text.section-dimension-linked": "This dimension follows another value. Unlink it before changing it.",
+  "figure.text.section-corner-too-large": "The corner radius is more than half the side.",
+  "figure.text.section-wall-too-thick": "The walls are too thick to leave an inside.",
+  "figure.text.section-ends-too-thick": "The closed ends are too thick to leave an inside.",
   "figure.label.part-position": "position (centre)",
   "figure.label.part-size": "size",
   "figure.label.parts": "parts",
@@ -200,7 +213,7 @@
   "figure.label.shown-always": "always",
   "figure.label.shown-while": "while {control} is at least",
   "figure.label.shown-at-least": "at least",
-  "figure.button.follow-size": "follow the figure size",
+  "figure.button.follow-size": "Match model size",
   "figure.text.size-declared-to-follow": "the figure size to follow was set from its parts: {x} × {y} × {z} mm.",
   "figure.label.recipes": "recipes",
   "figure.text.recipe-needs-a-part": "choose the part to put it on first.",
@@ -731,7 +744,8 @@
   "figure.label.resize-z": "Depth (Z)",
   "figure.label.resize-custom": "Linked to another rule",
   "figure.label.resize-following": "Follows equipment size",
-  "figure.label.resize-advanced": "Link to other parts · Advanced",
+  "figure.label.resize-advanced": "Choose size response",
+  "figure.text.resize-all-following": "This part changes with the model size.",
   "figure.text.resize-uniform-warning": "This equipment uses uniform scaling, which takes precedence over individual axis changes. Switching this mode is not yet available.",
   "figure.text.preview-setup": "Not resizing as expected? Choose a part to set which dimensions follow and where it stays attached. Preview controls do not change the saved model.",
   "figure.label.resize-part": "Part to configure",
@@ -829,6 +843,11 @@
   "figure.label.model-settings": "Model settings",
   "figure.text.fasten-editing": "Editing the current attachment: its {face} on {target}",
   "figure.text.fasten-new": "Attach anew",
+  "figure.text.fasten-start": "Attach this part to a face on another part so they keep their relationship when either changes.",
+  "figure.button.fasten-start": "Attach to another part",
+  "figure.label.target-part-placeholder": "Choose a part",
+  "figure.text.fasten-target-first": "Choose the part to attach to first.",
+  "figure.text.fasten-edit-on-plane": "This part is connected to the model's placement reference. Detach it before attaching it to another part.",
   "figure.button.fasten-update": "Update this attachment",
   "figure.button.align-to-floor": "Align to the floor",
   "figure.button.align-to-ceiling": "Align to the ceiling",

package/translations/ja.json

@@ -188,6 +188,19 @@
   "figure.label.palette-token": "palette token",
   "figure.label.part": "part",
   "figure.label.part-material": "material",
+  "figure.label.group-section": "断面",
+  "figure.label.section-corner": "角の半径",
+  "figure.text.section-corner-differs": "軸ごとに異なる",
+  "figure.label.section-cavity": "中空",
+  "figure.label.section-wall": "壁の厚さ",
+  "figure.text.section-wall-differs": "面ごとに異なる",
+  "figure.label.section-end-closed": "閉じる",
+  "figure.label.section-end-open": "開く",
+  "figure.text.section-face-in-use": "変更しませんでした: {faces} に取り付けられたものがあります。先に外してください。",
+  "figure.text.section-dimension-linked": "この寸法は他の値に従います。連動を解除してから変更してください。",
+  "figure.text.section-corner-too-large": "角の半径が辺の半分より大きいです。",
+  "figure.text.section-wall-too-thick": "壁が厚く、内部の空間が残りません。",
+  "figure.text.section-ends-too-thick": "閉じた端が厚く、内部の空間が残りません。",
   "figure.label.part-position": "position (centre)",
   "figure.label.part-size": "size",
   "figure.label.parts": "parts",
@@ -731,7 +744,8 @@
   "figure.label.resize-z": "奥行き (Z)",
   "figure.label.resize-custom": "別の規則に連結",
   "figure.label.resize-following": "図形と一緒に変わる",
-  "figure.label.resize-advanced": "他の部品と連結 · 詳細設定",
+  "figure.label.resize-advanced": "サイズの反応を設定",
+  "figure.text.resize-all-following": "この部品のサイズはモデルのサイズに合わせて変わります。",
   "figure.text.resize-uniform-warning": "この図形は全体を一つの比率で拡大します。方向ごとの変更より全体の比率が優先されます。この方式の切り替えはまだ提供されていません。",
   "figure.text.preview-setup": "思った通りにサイズが変わりませんか? 部品を選んで、伸びる方向と付いている場所を設定してください。この画面の操作値は保存されたモデルを変えません。",
   "figure.label.resize-part": "サイズ追従を設定する部品",
@@ -829,6 +843,11 @@
   "figure.label.model-settings": "モデル設定",
   "figure.text.fasten-editing": "現在の取り付けを編集: {face}を{target}に",
   "figure.text.fasten-new": "新しく取り付ける",
+  "figure.text.fasten-start": "別の部品の面に取り付けると、相手の部品が変わっても関係を保ちます。",
+  "figure.button.fasten-start": "別の部品に取り付ける",
+  "figure.label.target-part-placeholder": "取り付ける部品を選択",
+  "figure.text.fasten-target-first": "先に取り付ける部品を選んでください。",
+  "figure.text.fasten-edit-on-plane": "この部品はモデルの設置基準に接続されています。別の部品に取り付ける前に外してください。",
   "figure.button.fasten-update": "この取り付けを更新",
   "figure.button.align-to-floor": "床に合わせる",
   "figure.button.align-to-ceiling": "天井に合わせる",

package/translations/ko.json

@@ -188,6 +188,19 @@
   "figure.label.palette-token": "팔레트 토큰",
   "figure.label.part": "부품",
   "figure.label.part-material": "재질",
+  "figure.label.group-section": "단면",
+  "figure.label.section-corner": "모서리 반지름",
+  "figure.text.section-corner-differs": "축마다 다름",
+  "figure.label.section-cavity": "속을 비움",
+  "figure.label.section-wall": "벽 두께",
+  "figure.text.section-wall-differs": "면마다 다름",
+  "figure.label.section-end-closed": "막힘",
+  "figure.label.section-end-open": "열림",
+  "figure.text.section-face-in-use": "이 면에 붙어 있는 것이 있어 바꾸지 않았습니다: {faces}. 먼저 떼어 냅니다.",
+  "figure.text.section-dimension-linked": "이 치수는 다른 값을 따릅니다. 따르기를 풀고 고칩니다.",
+  "figure.text.section-corner-too-large": "모서리 반지름이 변 길이의 절반보다 큽니다.",
+  "figure.text.section-wall-too-thick": "벽이 두꺼워 속 공간이 남지 않습니다.",
+  "figure.text.section-ends-too-thick": "막힌 끝이 두꺼워 속 공간이 남지 않습니다.",
   "figure.label.part-position": "위치 (중심)",
   "figure.label.part-size": "크기",
   "figure.label.parts": "부품",
@@ -200,7 +213,7 @@
   "figure.label.shown-always": "늘 보임",
   "figure.label.shown-while": "{control} 값에 따라",
   "figure.label.shown-at-least": "이 값 이상에서 보임",
-  "figure.button.follow-size": "도형 크기를 따라감",
+  "figure.button.follow-size": "모델 크기에 맞추기",
   "figure.text.size-declared-to-follow": "따라갈 도형 크기를 부품에 맞춰 {x} × {y} × {z} mm 로 정했습니다.",
   "figure.label.recipes": "조각",
   "figure.text.recipe-needs-a-part": "붙일 부품을 먼저 고르세요.",
@@ -724,14 +737,15 @@
   "figure.text.placement-intent-wall": "벽 배치: 뒷면을 벽(Z=0)에서 지금 간격 그대로 유지하며 크기를 따라갑니다. 벽 위의 위치(X·Y)는 그대로입니다.",
   "figure.text.placement-intent-center": "중심 배치: 지금 중심 위치를 그대로 두고 크기만 따라갑니다. 바닥·천장·벽에 붙이지 않습니다.",
   "figure.label.resize-intent": "이 부품은 크기가 바뀔 때",
-  "figure.text.resize-intent": "방향마다 지금 치수와 크기 반응이 있습니다. 아래에서 따라갈 방향을 고르고, 붙어 있을 자리와 함께 적용하세요.",
+  "figure.text.resize-intent": "지금은 고정 크기입니다. 모델 크기가 바뀔 때 이 부품도 함께 바꿀지 정할 수 있습니다.",
   "figure.label.resize-diameter": "지름 (X·Z 함께)",
   "figure.label.resize-x": "너비 (X)",
   "figure.label.resize-y": "높이 (Y)",
   "figure.label.resize-z": "깊이 (Z)",
   "figure.label.resize-custom": "다른 규칙에 연결됨",
   "figure.label.resize-following": "도형과 함께 변경",
-  "figure.label.resize-advanced": "다른 부품과 연결 · 세부 설정",
+  "figure.label.resize-advanced": "크기 반응 정하기",
+  "figure.text.resize-all-following": "이 부품의 크기는 모델 크기를 따라 바뀝니다.",
   "figure.text.resize-uniform-warning": "이 도형은 전체 비율 유지 방식입니다. 방향별 변경보다 전체 비율 규칙이 우선합니다. 이 방식의 전환 기능은 아직 제공되지 않습니다.",
   "figure.text.preview-setup": "크기가 기대대로 바뀌지 않나요? 부품을 골라 늘어날 방향과 붙어 있을 자리를 설정하세요. 이 화면의 조작값은 저장된 모델을 바꾸지 않습니다.",
   "figure.label.resize-part": "크기 반응을 설정할 부품",
@@ -829,6 +843,11 @@
   "figure.label.model-settings": "모델 설정",
   "figure.text.fasten-editing": "현재 관계 수정 — {face} → {target}",
   "figure.text.fasten-new": "새로 붙이기",
+  "figure.text.fasten-start": "이 부품을 다른 부품의 면에 붙여 두면, 상대 부품의 크기나 위치가 바뀌어도 함께 움직입니다.",
+  "figure.button.fasten-start": "다른 부품에 붙이기",
+  "figure.label.target-part-placeholder": "붙일 부품 선택",
+  "figure.text.fasten-target-first": "먼저 붙일 부품을 고르세요.",
+  "figure.text.fasten-edit-on-plane": "이 부품은 현재 모델의 설치 기준면에 연결되어 있습니다. 다른 부품에 붙이려면 먼저 붙임을 푸세요.",
   "figure.button.fasten-update": "이 붙임 수정",
   "figure.button.align-to-floor": "바닥에 맞추기",
   "figure.button.align-to-ceiling": "천장에 맞추기",

package/translations/ms.json

@@ -188,6 +188,19 @@
   "figure.label.palette-token": "palette token",
   "figure.label.part": "part",
   "figure.label.part-material": "material",
+  "figure.label.group-section": "keratan",
+  "figure.label.section-corner": "jejari sudut",
+  "figure.text.section-corner-differs": "berbeza mengikut paksi",
+  "figure.label.section-cavity": "berongga",
+  "figure.label.section-wall": "ketebalan dinding",
+  "figure.text.section-wall-differs": "berbeza mengikut sisi",
+  "figure.label.section-end-closed": "tertutup",
+  "figure.label.section-end-open": "terbuka",
+  "figure.text.section-face-in-use": "Tidak diubah: ada sesuatu dipasang pada {faces}. Tanggalkannya dahulu.",
+  "figure.text.section-dimension-linked": "Dimensi ini mengikut nilai lain. Nyahpaut sebelum mengubahnya.",
+  "figure.text.section-corner-too-large": "Jejari sudut melebihi separuh panjang sisi.",
+  "figure.text.section-wall-too-thick": "Dinding terlalu tebal sehingga tiada ruang di dalam.",
+  "figure.text.section-ends-too-thick": "Hujung tertutup terlalu tebal sehingga tiada ruang di dalam.",
   "figure.label.part-position": "position (centre)",
   "figure.label.part-size": "size",
   "figure.label.parts": "parts",
@@ -731,7 +744,8 @@
   "figure.label.resize-z": "Kedalaman (Z)",
   "figure.label.resize-custom": "Dipautkan pada peraturan lain",
   "figure.label.resize-following": "Berubah bersama rajah",
-  "figure.label.resize-advanced": "Paut pada bahagian lain · Lanjutan",
+  "figure.label.resize-advanced": "Tetapkan tindak balas saiz",
+  "figure.text.resize-all-following": "Saiz bahagian ini berubah bersama saiz model.",
   "figure.text.resize-uniform-warning": "Rajah ini membesar dengan satu nisbah, yang didahulukan berbanding perubahan setiap arah. Penukaran cara ini belum tersedia.",
   "figure.text.preview-setup": "Saiz tidak berubah seperti dijangka? Pilih bahagian untuk menetapkan arah yang mengikut dan tempat ia dilekatkan. Nilai di sini tidak mengubah model yang disimpan.",
   "figure.label.resize-part": "Bahagian untuk ditetapkan",
@@ -829,6 +843,11 @@
   "figure.label.model-settings": "Tetapan model",
   "figure.text.fasten-editing": "Menyunting lekatan semasa: {face} pada {target}",
   "figure.text.fasten-new": "Lekatkan baharu",
+  "figure.text.fasten-start": "Lekatkan bahagian ini pada muka bahagian lain supaya hubungannya kekal apabila salah satu berubah.",
+  "figure.button.fasten-start": "Lekatkan pada bahagian lain",
+  "figure.label.target-part-placeholder": "Pilih bahagian",
+  "figure.text.fasten-target-first": "Pilih bahagian yang hendak dilekatkan dahulu.",
+  "figure.text.fasten-edit-on-plane": "Bahagian ini disambungkan kepada rujukan peletakan model. Tanggalkan dahulu sebelum melekatkannya pada bahagian lain.",
   "figure.button.fasten-update": "Kemas kini lekatan ini",
   "figure.button.align-to-floor": "Jajarkan ke lantai",
   "figure.button.align-to-ceiling": "Jajarkan ke siling",

package/translations/zh.json

@@ -188,6 +188,19 @@
   "figure.label.palette-token": "palette token",
   "figure.label.part": "part",
   "figure.label.part-material": "material",
+  "figure.label.group-section": "截面",
+  "figure.label.section-corner": "圆角半径",
+  "figure.text.section-corner-differs": "各轴不同",
+  "figure.label.section-cavity": "中空",
+  "figure.label.section-wall": "壁厚",
+  "figure.text.section-wall-differs": "各面不同",
+  "figure.label.section-end-closed": "封闭",
+  "figure.label.section-end-open": "开口",
+  "figure.text.section-face-in-use": "未更改：{faces} 上附着有其他部件。请先拆下。",
+  "figure.text.section-dimension-linked": "此尺寸跟随其他值。请先解除关联再修改。",
+  "figure.text.section-corner-too-large": "圆角半径超过边长的一半。",
+  "figure.text.section-wall-too-thick": "壁太厚，内部没有空间。",
+  "figure.text.section-ends-too-thick": "封闭端太厚，内部没有空间。",
   "figure.label.part-position": "position (centre)",
   "figure.label.part-size": "size",
   "figure.label.parts": "parts",
@@ -731,7 +744,8 @@
   "figure.label.resize-z": "深度（Z）",
   "figure.label.resize-custom": "已链接到其他规则",
   "figure.label.resize-following": "随图形一起变化",
-  "figure.label.resize-advanced": "与其他部件链接 · 高级设置",
+  "figure.label.resize-advanced": "设置尺寸响应",
+  "figure.text.resize-all-following": "此部件会随模型尺寸一起变化。",
   "figure.text.resize-uniform-warning": "此图形按单一比例整体缩放，整体比例优先于各方向的变化。暂不提供切换此方式的功能。",
   "figure.text.preview-setup": "尺寸没有按预期变化？请选择部件，设置跟随的方向和附着的位置。此处的操作值不会更改已保存的模型。",
   "figure.label.resize-part": "要设置尺寸跟随的部件",
@@ -829,6 +843,11 @@
   "figure.label.model-settings": "模型设置",
   "figure.text.fasten-editing": "编辑当前附着：{face}附着在{target}上",
   "figure.text.fasten-new": "新建附着",
+  "figure.text.fasten-start": "将此部件附着到另一部件的面上，任一部件变化时都会保持该关系。",
+  "figure.button.fasten-start": "附着到另一部件",
+  "figure.label.target-part-placeholder": "选择部件",
+  "figure.text.fasten-target-first": "请先选择要附着的部件。",
+  "figure.text.fasten-edit-on-plane": "此部件当前连接到模型的安装基准。附着到另一部件前请先解除连接。",
   "figure.button.fasten-update": "更新此附着",
   "figure.button.align-to-floor": "对齐地面",
   "figure.button.align-to-ceiling": "对齐天花板",