@things-factory/figure-ui 10.1.68 → 10.1.69

package/translations/ko.json

@@ -189,7 +189,22 @@
   "figure.label.part-position": "위치 (중심)",
   "figure.label.part-size": "크기",
   "figure.label.parts": "부품",
-  "figure.label.placement": "위치와 크기",
+  "figure.label.gizmo-tools": "끌어서 바꾸기",
+  "figure.button.gizmo-translate": "옮기기",
+  "figure.button.gizmo-rotate": "돌리기",
+  "figure.button.gizmo-scale": "크기 바꾸기",
+  "figure.text.gizmo-not-own": "다른 부품이나 크기에 맞춰 놓인 부품이라 끌어서 바꿀 수 없습니다",
+  "figure.label.shown-when": "보이는 때",
+  "figure.label.shown-always": "늘 보임",
+  "figure.label.shown-while": "{control} 값에 따라",
+  "figure.label.shown-at-least": "이 값 이상에서 보임",
+  "figure.button.follow-size": "도형 크기를 따라감",
+  "figure.text.size-declared-to-follow": "따라갈 도형 크기를 부품에 맞춰 {x} × {y} × {z} mm 로 정했습니다.",
+  "figure.label.recipes": "조각",
+  "figure.text.recipe-needs-a-part": "붙일 부품을 먼저 고르세요.",
+  "figure.text.recipe-onto": "{part} 에 넣습니다.",
+  "figure.button.insert-recipe": "넣기",
+  "figure.label.placement": "붙이기",
   "figure.label.placement-ceiling": "천장 기반 (ceiling)",
   "figure.label.placement-center": "중심 기반 (center)",
   "figure.label.placement-floor": "바닥 기반 (floor)",
@@ -523,13 +538,8 @@
   "figure.label.field-radius": "반지름",
   "figure.label.field-length": "길이",
   "figure.label.field-round": "모서리 반경",
-  "figure.label.field-left": "왼쪽",
-  "figure.label.field-right": "오른쪽",
-  "figure.label.field-bottom": "아랫면",
-  "figure.label.field-top": "윗면",
-  "figure.label.field-openingLeft": "개구부 왼쪽",
-  "figure.label.field-openingRight": "개구부 오른쪽",
-  "figure.label.field-openingTop": "개구부 윗면",
+  "figure.label.field-jamb": "기둥 두께",
+  "figure.label.field-head": "윗틀 두께",
   "figure.label.field-radiusX": "반지름 X",
   "figure.label.field-radiusY": "반지름 Y",
   "figure.label.field-radiusZ": "반지름 Z",

package/translations/ms.json

@@ -189,7 +189,22 @@
   "figure.label.part-position": "position (centre)",
   "figure.label.part-size": "size",
   "figure.label.parts": "parts",
-  "figure.label.placement": "position and size",
+  "figure.label.gizmo-tools": "drag to change",
+  "figure.button.gizmo-translate": "move",
+  "figure.button.gizmo-rotate": "turn",
+  "figure.button.gizmo-scale": "resize",
+  "figure.text.gizmo-not-own": "this part is placed by another part or by the size, so it cannot be dragged",
+  "figure.label.shown-when": "shown when",
+  "figure.label.shown-always": "always",
+  "figure.label.shown-while": "while {control} is at least",
+  "figure.label.shown-at-least": "at least",
+  "figure.button.follow-size": "follow the figure size",
+  "figure.text.size-declared-to-follow": "the figure size to follow was set from its parts: {x} × {y} × {z} mm.",
+  "figure.label.recipes": "recipes",
+  "figure.text.recipe-needs-a-part": "choose the part to put it on first.",
+  "figure.text.recipe-onto": "onto {part}.",
+  "figure.button.insert-recipe": "put in",
+  "figure.label.placement": "lekatan",
   "figure.label.placement-ceiling": "berasaskan siling (ceiling)",
   "figure.label.placement-center": "berasaskan pusat (center)",
   "figure.label.placement-floor": "berasaskan lantai (floor)",
@@ -523,13 +538,8 @@
   "figure.label.field-radius": "Jejari",
   "figure.label.field-length": "Panjang",
   "figure.label.field-round": "Jejari bucu",
-  "figure.label.field-left": "Kiri",
-  "figure.label.field-right": "Kanan",
-  "figure.label.field-bottom": "Bawah",
-  "figure.label.field-top": "Atas",
-  "figure.label.field-openingLeft": "Bukaan kiri",
-  "figure.label.field-openingRight": "Bukaan kanan",
-  "figure.label.field-openingTop": "Bukaan atas",
+  "figure.label.field-jamb": "jamb",
+  "figure.label.field-head": "head",
   "figure.label.field-radiusX": "Jejari X",
   "figure.label.field-radiusY": "Jejari Y",
   "figure.label.field-radiusZ": "Jejari Z",

package/translations/zh.json

@@ -189,7 +189,22 @@
   "figure.label.part-position": "position (centre)",
   "figure.label.part-size": "size",
   "figure.label.parts": "parts",
-  "figure.label.placement": "position and size",
+  "figure.label.gizmo-tools": "drag to change",
+  "figure.button.gizmo-translate": "move",
+  "figure.button.gizmo-rotate": "turn",
+  "figure.button.gizmo-scale": "resize",
+  "figure.text.gizmo-not-own": "this part is placed by another part or by the size, so it cannot be dragged",
+  "figure.label.shown-when": "shown when",
+  "figure.label.shown-always": "always",
+  "figure.label.shown-while": "while {control} is at least",
+  "figure.label.shown-at-least": "at least",
+  "figure.button.follow-size": "follow the figure size",
+  "figure.text.size-declared-to-follow": "the figure size to follow was set from its parts: {x} × {y} × {z} mm.",
+  "figure.label.recipes": "recipes",
+  "figure.text.recipe-needs-a-part": "choose the part to put it on first.",
+  "figure.text.recipe-onto": "onto {part}.",
+  "figure.button.insert-recipe": "put in",
+  "figure.label.placement": "附着",
   "figure.label.placement-ceiling": "天花板基准 (ceiling)",
   "figure.label.placement-center": "中心基准 (center)",
   "figure.label.placement-floor": "地面基准 (floor)",
@@ -523,13 +538,8 @@
   "figure.label.field-radius": "半径",
   "figure.label.field-length": "长度",
   "figure.label.field-round": "圆角半径",
-  "figure.label.field-left": "左",
-  "figure.label.field-right": "右",
-  "figure.label.field-bottom": "底面",
-  "figure.label.field-top": "顶面",
-  "figure.label.field-openingLeft": "开口 左",
-  "figure.label.field-openingRight": "开口 右",
-  "figure.label.field-openingTop": "开口 顶",
+  "figure.label.field-jamb": "jamb",
+  "figure.label.field-head": "head",
   "figure.label.field-radiusX": "半径 X",
   "figure.label.field-radiusY": "半径 Y",
   "figure.label.field-radiusZ": "半径 Z",