@things-factory/figure-ui 10.1.66 → 10.1.67

package/dist-client/modeller/v3-editor.js

@@ -39,16 +39,16 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
         this.selected = '';
         this.error = '';
         this.tab = 'properties';
-        /** What the middle shows: the parts being edited, or the figure placed on a board at eight sizes (V2's two modes). */
+        /** What the middle shows: the parts being edited, or the figure placed on a board at eight sizes. */
         this.middle = 'edit';
         /**
-         * How the workbench shows the figure -- V2's view settings, the board's own state names. The viewer's, kept in
+         * How the workbench shows the figure, in the board's own state names. The viewer's, kept in
          * their browser, never in the figure.
          */
         this.view = FigureV3Editor_1.storedView();
         /**
-         * Parts hidden on the workbench — the author's view while working, not the asset's visibility. Not saved, as in
-         * the V2 modeller: a part hidden here is still in the figure, still checked, still drawn on a board.
+         * Parts hidden on the workbench — the author's view while working, not the asset's visibility. Not saved: a part
+         * hidden here is still in the figure, still checked, still drawn on a board.
          */
         this.hiddenParts = new Set();
         /** A value in hand -- typed, held on a spinner, scrubbed, dragged -- drawn at once and recorded on release. */
@@ -68,7 +68,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
             /*
               The session's history is the only one. With the canvas focused the scene took Ctrl+Z as well, undoing on its own
               board the last value the canvas had written -- which the canvas then told as a drag: an undo of a drag on a
-              converted part wrote the drag again (2026-09-25). Heard first (capture) and kept from the scene.
+              part placed by a rule wrote the drag again (2026-09-25). Heard first (capture) and kept from the scene.
             */
             e.stopPropagation();
             if (action === 'translate' || action === 'rotate' || action === 'scale')
@@ -143,7 +143,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
       min-width: 0;
       min-height: 0;
     }
-    /* The side: tabs over one panel at a time, each using the whole height (V2's side, and why it had tabs). */
+    /* The side: tabs over one panel at a time, each using the whole height. */
     aside {
       display: flex;
       flex-direction: column;
@@ -401,7 +401,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
     }
     /**
      * The list's own operations, as V3 part edits — each one step of the session's history. The copy and the moved
-     * part stay selected, as they do in the V2 list.
+     * part stay selected.
      */
     duplicatePart(id) {
         this.run(() => {
@@ -488,7 +488,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
             return this.requestUpdate();
         }
         /*
-          A part whose place is worked out (a converted one) has no numbers for the gizmo to write: the drag is added beside
+          A part whose place is worked out has no numbers for the gizmo to write: the drag is added beside
           its rule (`nudge-part`). A part a joint or a fastening places, or a size that is worked out, is refused -- said in
           words, not by the part silently springing back (user, 2026-09-24: 「기즈모 컨트롤도 전혀 작동이 안되는군」).
         */
@@ -496,7 +496,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
         if (!body)
             return this.requestUpdate();
         const { by, turn } = nudgeOf(body, result);
-        /* A size worked out from the figure's: the drag's factor beside its rule, so it still follows (V2 scaled any part). */
+        /* A size worked out from the figure's: the drag's factor beside its rule, so it still follows. */
         const grow = {};
         if (result.scale)
             ['x', 'y', 'z'].forEach((axis, i) => Math.abs(result.scale[i] - 1) > 1e-6 && (grow[axis] = Math.round(result.scale[i] * 1e6) / 1e6));
@@ -532,7 +532,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
                 this.session.apply(changes);
         });
     }
-    /** A mirrored copy: duplicate, then place the copy on the other side — two steps, as the V2 list makes it. */
+    /** A mirrored copy: duplicate, then place the copy on the other side — two steps. */
     mirror(axis) {
         this.run(() => {
             const id = this.selected;
@@ -578,7 +578,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
     </div>`;
     }
     /**
-     * A part's name — the V2 part name field. It renames every value the part owns, and what refers to them follows
+     * A part's name. It renames every value the part owns, and what refers to them follows
      * (figure-model's rename-part), as one step of the history.
      */
     /**
@@ -613,7 +613,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
                         : String(error);
         }
     }
-    /** Size response, fastening and motion for the selected part (parity ④ ⑤ ⑥), as authoring commands. */
+    /** Size response, fastening and motion for the selected part, as authoring commands. */
     renderLinks(unavailable, section) {
         let asset;
         try {
@@ -639,7 +639,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
       @v3-part-edit=${(e) => this.run(() => this.session.edit(e.detail.edit))}
     ></figure-v3-links>`;
     }
-    /** The figure's controls: try a value, name it, set its range and travel time, keep the pose (parity row ⑥). */
+    /** The figure's controls: try a value, name it, set its range and travel time, keep the pose. */
     renderControls(view, unavailable) {
         let asset;
         try {
@@ -841,8 +841,8 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
       </button>`;
     }
     /**
-     * The parts list, one row per part the author made: a repeat is one row with how many copies it makes now (V2 listed
-     * its parts the same way; user, 2026-09-24: the conveyor's sixteen rollers were sixteen rows).
+     * The parts list, one row per part the author made: a repeat is one row with how many copies it makes now
+     * (user, 2026-09-24: the conveyor's sixteen rollers were sixteen rows).
      */
     partRows(geometry) {
         const rows = new Map();
@@ -875,7 +875,7 @@ let FigureV3Editor = class FigureV3Editor extends LitElement {
         }
     }
     /**
-     * A repeat: which way its copies run, how many there are now, and how far apart -- V2's `repeat: { axis, pitch }`.
+     * A repeat: which way its copies run, how many there are now, and how far apart.
      * The pitch of a row that fills its length is edited as a number (`set-repeat` makes it the part's own the first
      * time); a row of a fixed count says its pitch cannot be set yet (figure-model refuses it the same way).
      */