@things-factory/figure-ui 10.1.66 → 10.1.67

package/translations/en.json

@@ -3,8 +3,6 @@
   "figure.button.add-clip": "add clip",
   "figure.button.add-key": "add key",
   "figure.button.add-parameter": "add parameter",
-  "figure.button.apply-fix": "apply fix · {part} {axis} face: {from} → {to}",
-  "figure.button.apply-recommended-fix": "apply recommended fix",
   "figure.button.ask": "ask",
   "figure.button.cancel": "cancel",
   "figure.button.center-x": "centre X",
@@ -27,22 +25,15 @@
   "figure.button.move-part-down": "move down",
   "figure.button.move-part-up": "move up",
   "figure.button.new-figure": "new figure",
-  "figure.button.pivot-clear": "part centre",
-  "figure.button.pivot-set": "set",
   "figure.button.pose-as-default": "make this the default pose",
-  "figure.button.preview-fix": "preview fix · {part} {axis} face: {from} → {to}",
   "figure.button.release-figure": "release",
-  "figure.button.restore-released-base": "restore the previous model width",
-  "figure.button.keep-changed-appearance": "publish with the adjusted width",
   "figure.button.remove": "remove",
   "figure.button.remove-part": "delete",
   "figure.button.reset-view": "reset",
   "figure.button.revert": "revert",
   "figure.button.save": "save",
   "figure.button.see-the-trend-chart": "see the trend chart",
-  "figure.button.settle-on-floor": "settle on the floor",
   "figure.button.snap": "snap",
-  "figure.button.take-n-changes": "apply {n}",
   "figure.label.declared-space": "declared space",
   "figure.label.follows-expression": "set by an expression",
   "figure.label.gizmo-rotate": "turn",
@@ -86,40 +77,9 @@
   "figure.text.part-name-invalid": "'{name}' cannot be a part name. Start with a letter and use letters, digits, - and _.",
   "figure.text.part-name-taken": "'{name}' is already used in this figure.",
   "figure.text.placement-redeclares": "changing it declares the space again from the parts as they are now.",
-  "figure.text.recommended-fix-explained": "{n} changes rechecked against every resize case. They apply to this draft only; review and save when ready.",
   "figure.text.show-affected-parts": "show affected parts",
   "figure.button.to-floor": "to floor",
   "figure.label.accepts": "accepts",
-  "figure.label.anchor": "anchored face",
-  "figure.label.anchor-advanced": "advanced proportional sizing",
-  "figure.label.anchor-aspect-x": "grows only as much as x does (keeps ratio)",
-  "figure.label.anchor-aspect-y": "grows only as much as y does (keeps ratio)",
-  "figure.label.anchor-aspect-z": "grows only as much as z does (keeps ratio)",
-  "figure.label.anchor-auto": "automatic ({rule})",
-  "figure.label.anchor-center": "stays centred, keeps its size",
-  "figure.label.anchor-choice-aspect-x": "keep X ratio",
-  "figure.label.anchor-choice-aspect-y": "keep Y ratio",
-  "figure.label.anchor-choice-aspect-z": "keep Z ratio",
-  "figure.label.anchor-choice-auto": "automatic",
-  "figure.label.anchor-choice-center": "stay centred",
-  "figure.label.anchor-choice-max-x": "right face",
-  "figure.label.anchor-choice-max-y": "upper face",
-  "figure.label.anchor-choice-max-z": "front face",
-  "figure.label.anchor-choice-min-x": "left face",
-  "figure.label.anchor-choice-min-y": "lower face",
-  "figure.label.anchor-choice-min-z": "back face",
-  "figure.label.anchor-choice-scale": "grow together",
-  "figure.label.anchor-choice-span": "fill both faces",
-  "figure.label.anchor-max": "stays on the upper face",
-  "figure.label.anchor-max-x": "stays on the right face",
-  "figure.label.anchor-max-y": "stays on the top face",
-  "figure.label.anchor-max-z": "stays on the front face",
-  "figure.label.anchor-min": "stays on the lower face",
-  "figure.label.anchor-min-x": "stays on the left face",
-  "figure.label.anchor-min-y": "stays on the bottom face",
-  "figure.label.anchor-min-z": "stays on the back face",
-  "figure.label.anchor-scale": "grows with the box",
-  "figure.label.anchor-span": "touches both faces, fills between",
   "figure.label.animation": "animation",
   "figure.label.assumed-drawing": "the drawing it goes on",
   "figure.label.axis-consistency": "visual consistency",
@@ -139,7 +99,6 @@
   "figure.label.axis-scale": "scale",
   "figure.label.axis-scale-short": "scale",
   "figure.label.axis-width": "width",
-  "figure.label.base-box": "base box (mm)",
   "figure.label.budget-groups": "groups (draw calls)",
   "figure.label.budget-independent": "independently moved parts",
   "figure.label.budget-parts": "part count",
@@ -148,20 +107,12 @@
   "figure.label.budget-triangles": "triangles",
   "figure.label.budgets": "budgets",
   "figure.label.by-axis": "maturity by item",
-  "figure.label.candidate-review": "candidate review",
   "figure.label.cast-shadow": "cast shadow",
   "figure.label.category": "category",
   "figure.label.ceiling-height": "ceiling height (mm)",
-  "figure.label.channel-path": "moves",
-  "figure.label.channel-pivot": "pivot",
-  "figure.label.channel-target": "part",
-  "figure.label.channel-target-joints": "joints",
-  "figure.label.channel-target-parts": "parts",
-  "figure.label.channels": "channels",
   "figure.label.clip-name": "clip name",
   "figure.label.clips": "animation (plays over time)",
   "figure.label.coordinate-ground": "coordinate ground",
-  "figure.label.corner-round": "corner round",
   "figure.label.detail-L": "detailed",
   "figure.label.detail-M": "normal",
   "figure.label.detail-S": "simple",
@@ -187,17 +138,12 @@
   "figure.label.figure-released": "released",
   "figure.label.figure-type": "type",
   "figure.label.findings": "findings",
-  "figure.label.flat-shading": "flat shading",
   "figure.label.follow-camera": "follow camera",
   "figure.label.guides": "guides",
   "figure.label.help": "help",
   "figure.label.hemisphere-light": "hemisphere light",
   "figure.label.history": "history",
-  "figure.label.hollow-floor": "floor thickness",
-  "figure.label.hollow-wall": "wall thickness",
   "figure.label.intensity": "intensity",
-  "figure.label.interpolation-linear": "smooth",
-  "figure.label.interpolation-step": "stepped",
   "figure.label.joint": "joint",
   "figure.label.joint-axis": "axis",
   "figure.label.joint-limit-max": "max",
@@ -213,7 +159,6 @@
   "figure.label.joint-type-prismatic": "slide",
   "figure.label.joint-type-revolute": "turn within limits",
   "figure.label.joint-value": "joint value",
-  "figure.label.keep-round": "section",
   "figure.label.key-at": "at (s)",
   "figure.label.key-at-value": "at (0–1)",
   "figure.label.key-light": "key light",
@@ -239,19 +184,11 @@
   "figure.label.palette-purpose-warning": "warning signal · an attention-needed indicator",
   "figure.label.palette-role": "color role",
   "figure.label.palette-token": "palette token",
-  "figure.label.parameter-default": "default",
-  "figure.label.parameter-duration": "full travel (s)",
-  "figure.label.parameter-name": "parameter name",
-  "figure.label.parameter-range": "range",
-  "figure.label.parameters": "parameters (pose set by value)",
   "figure.label.part": "part",
   "figure.label.part-material": "material",
   "figure.label.part-position": "position (centre)",
   "figure.label.part-size": "size",
   "figure.label.parts": "parts",
-  "figure.label.path-rotation": "rotation",
-  "figure.label.path-scale": "scale",
-  "figure.label.path-translation": "offset",
   "figure.label.placement": "position and size",
   "figure.label.placement-ceiling": "ceiling-based (ceiling)",
   "figure.label.placement-center": "center-based (center)",
@@ -270,15 +207,10 @@
   "figure.label.primitive-cube": "box",
   "figure.label.primitive-cylinder": "cylinder",
   "figure.label.primitive-polygon": "polygon",
-  "figure.label.primitive-rect": "rectangle",
   "figure.label.primitive-sphere": "sphere",
   "figure.label.primitive-wall": "wall",
   "figure.label.properties": "properties",
   "figure.label.proposed": "proposed",
-  "figure.label.recipe-conveyor": "conveyor rollers keep turning",
-  "figure.label.recipe-gate": "a door or gate opens",
-  "figure.label.recipe-lift": "a lift changes height",
-  "figure.label.recipe-pusher": "a pusher moves into place",
   "figure.label.release": "release",
   "figure.label.release-verdict": "release check",
   "figure.label.released-versions": "released versions",
@@ -288,10 +220,6 @@
   "figure.label.repeat-pitch": "pitch",
   "figure.label.reuse-trend": "reuse trend",
   "figure.label.instance-count": "instance count",
-  "figure.label.role-in-capability": "role in the capability",
-  "figure.label.role-port-in": "inbound port",
-  "figure.label.role-port-out": "outbound port",
-  "figure.label.role-slot": "slot",
   "figure.label.rotation-degrees": "rotation (degrees)",
   "figure.label.rung-flow": "things flow through",
   "figure.label.rung-hold": "holds things",
@@ -306,13 +234,7 @@
   "figure.label.shape": "shape",
   "figure.label.shape-detail": "shape detail",
   "figure.label.shapes": "shapes",
-  "figure.label.sizing-fixed": "keeps its size",
-  "figure.label.sizing-repeat": "repeats",
-  "figure.label.sizing-scale": "scales proportionally",
-  "figure.label.sizing-stretch": "stretches on one axis",
   "figure.label.sky-color": "sky color",
-  "figure.label.slot-capacity": "capacity",
-  "figure.label.slots-and-ports": "slots and ports",
   "figure.label.state": "state",
   "figure.label.status-colors": "lit colors (lamps · indicators)",
   "figure.label.tab-capability": "capability",
@@ -330,14 +252,9 @@
   "figure.text.add-a-shape": "click to add a part",
   "figure.text.all-lights-off": "both lights are off; only emissive surfaces show.",
   "figure.text.already-released-edit-to-release-again": "already released. edit and save to go back to draft, then release again.",
-  "figure.text.anchor-explained": "where this part stays as the box grows. two touching parts on different faces drift apart as it grows.",
-  "figure.text.anchors-are-not-drawn": "slots and ports are not drawn on a drawing; only the editor shows them.",
   "figure.text.animation-empty-examples": "a turning roller · a sliding door leaf · a rising lift · a blinking beacon.",
   "figure.text.animation-empty-what-it-is": "no motion yet. add a clip to move parts.",
-  "figure.text.animation-needs-a-named-part": "add a part first.",
-  "figure.text.assistant-proposed-a-figure": "the proposal is shown on the right.",
   "figure.text.axes-not-measurable-yet": "left off the chart because they cannot be measured: {axes}. the reasons are below.",
-  "figure.text.base-box-explained": "The box that sets the scale when the figure is placed on a drawing. A part reaching outside it blocks release. Changing the size leaves the parts where they are.",
   "figure.text.bound-by-groups": "Part groups fill up first — this figure is {per} groups, and one screen draws {budget} groups at 60fps.",
   "figure.text.bound-by-triangles": "triangles reach the limit first ({per} per instance, {budget} per drawing).",
   "figure.text.budget-measured-on": "Measured on {gpu}, {on}. A figure standing still costs nothing — only what is on screen and redrawn counts.",
@@ -356,31 +273,17 @@
   "figure.text.verdict-waiting": "the check follows your edits.",
   "figure.text.canvas-appears-once-a-part-exists": "pick a shape on the left to add the first part.",
   "figure.text.capability-hand-written": "set by hand, so it matches none of the levels above. it is saved under the names below.",
-  "figure.text.capacity-from-repeat": "capacity comes from the repeat setting and the instance size",
   "figure.text.category-explained": "how the palette groups figures. one per figure.",
   "figure.text.category-placeholder": "e.g. conveyor",
   "figure.text.ceiling-height-explained": "the height a ceiling figure hangs from in the preview.",
   "figure.text.center-on-x": "move to the centre of the base box on X.",
   "figure.text.center-on-z": "move to the centre of the base box on Z.",
-  "figure.text.change-added": "a new part",
-  "figure.text.change-animations": "animations",
-  "figure.text.change-base": "the base size",
-  "figure.text.change-capabilities": "capabilities",
-  "figure.text.change-changed": "a changed part",
-  "figure.text.change-detail": "the detail level",
-  "figure.text.change-joints": "joints",
-  "figure.text.change-placement": "placement",
-  "figure.text.change-removed": "a part being removed",
-  "figure.text.change-styleKit": "the style kit",
-  "figure.text.channel-target-is-gone": "no such part. if you renamed the part, pick it again here.",
   "figure.text.clip-is-time-running": "plays over time. the value an instance gives is the playback speed.",
   "figure.text.clip-name-is-how-it-is-driven": "an instance gives a speed by this name.",
   "figure.text.clip-name-taken": "another clip already has this name. enter a different name.",
-  "figure.text.clip-needs-a-channel": "add at least one channel.",
   "figure.text.clip-needs-a-name": "enter a name.",
   "figure.text.collapse-parts-pane": "collapse the part list",
   "figure.text.collapse-properties-pane": "collapse the property pane",
-  "figure.text.contract-not-compared": "Could not check whether this change breaks what is already placed — {why}",
   "figure.text.coordinate-ground-explained": "draws the origin and a grid on the floor",
   "figure.text.delete-figure-confirm": "delete {name}? drawings already using this type will no longer find it.",
   "figure.text.designate-in-properties": "nothing designated yet. select a part and set its role in the properties tab.",
@@ -400,7 +303,6 @@
   "figure.text.figure-type-example": "e.g. OHT, AGV_LIFTER",
   "figure.text.figure-type-placeholder": "Figure type identifier (e.g. OHT)",
   "figure.text.find-by-this-tag": "find by this tag",
-  "figure.text.fit-base-explained": "Shrinks the box to the smallest one holding every part. The centre stays put, so a part sitting off-centre leaves room on the other side.",
   "figure.text.fits-n-instances": "up to {n}",
   "figure.text.floor-explained": "overlaps the coordinate ground, so it is usually off",
   "figure.text.follow-camera-explained": "turn off to fix the shadow direction",
@@ -419,19 +321,8 @@
   "figure.text.independent-parts-cost": "each part that carries its own transform adds one draw call.",
   "figure.text.independent-parts-over": "over the limit. fewer of these fit on one screen at once.",
   "figure.text.instances-unit": "instances",
-  "figure.text.interpolation-explained": "how the gap between keys is filled.",
-  "figure.text.joint-channel-value-deg": "key values are joint angles in degrees.",
-  "figure.text.joint-channel-value-mm": "key values are joint travel in mm.",
-  "figure.text.joint-driven-by": "parameter \"{name}\" moves this joint. check it in the preview.",
   "figure.text.joint-explained": "when the part it is attached to moves, this part moves with it. a joint sets the axis this part turns about or slides along relative to that part, and its limits. a parameter created with the joint sets its value.",
-  "figure.text.joint-limits-must-include-zero": "the limits must include 0. the pose as drawn is 0.",
-  "figure.text.joint-not-driven": "no parameter moves this joint. add one in the animation tab.",
   "figure.text.joint-value-beyond-limits": "outside the joint limits.",
-  "figure.text.keep-round-cost": "1 draw call",
-  "figure.text.keep-round-merged": "merged into a group",
-  "figure.text.keep-round-off": "off",
-  "figure.text.keep-round-on": "keep round",
-  "figure.text.keys-must-rise": "each key must come after the one before it.",
   "figure.text.limit-comes-from-level": "the detail level sets this limit.",
   "figure.text.maturity-blocked-no-binding": "state display is not measured yet.",
   "figure.text.maturity-blocked-no-detail-level": "the V3 format has no detail level. the budgets and placement scale above take its place.",
@@ -450,8 +341,6 @@
   "figure.text.more-segment-options": "advanced segment counts",
   "figure.text.motion-intent-help": "pick the part to move, then what it is for. the motion it makes can be adjusted in the advanced editor below.",
   "figure.text.must-fix-to-release": "fix these first",
-  "figure.text.choose-appearance-change": "choose how to handle the adjusted model width",
-  "figure.text.appearance-choice-explained": "Restore returns X and Z to the previous release while retaining Y and all other edits. Publishing with the adjusted width keeps the current model outline.",
   "figure.text.n-of-limit": "{used} / {limit}",
   "figure.text.n-parts-at-most": "up to {limit} parts",
   "figure.text.n-triangles": "{count} triangles",
@@ -463,47 +352,23 @@
   "figure.text.on-by-default-explained": "the starting state when placed on a drawing. a value set on the instance takes priority.",
   "figure.text.other-segment-count": "enter a value",
   "figure.text.palette-purpose-explained": "choose the color role this part plays on screen.",
-  "figure.text.parameter-curve-is-the-value-axis": "keys sit on the value (0 = minimum, 1 = maximum). full travel time is set separately.",
-  "figure.text.parameter-duration-empty-is-instant": "seconds to move from minimum to maximum. leave empty to apply a new value at once.",
-  "figure.text.parameter-is-a-value-not-a-timeline": "shows the pose for the value an instance gives (e.g. hoist 1200mm down).",
-  "figure.text.parameter-key-within-span": "enter a key between 0 (minimum) and 1 (maximum).",
-  "figure.text.parameter-name-is-how-a-value-arrives": "an instance gives a value by this name.",
-  "figure.text.parameter-needs-a-name": "enter a name.",
   "figure.text.part-limit-reached": "the detail level allows no more parts — raise the level or remove a part.",
   "figure.text.part-limit-reached-short": "level {level} allows {limit} parts. raise the level or remove a part.",
   "figure.text.part-name-cannot-be-empty": "give the part a name.",
-  "figure.text.path-rotation-unit": "euler angles in degrees, the same convention as the part's rotation.",
-  "figure.text.path-scale-unit": "a ratio. 1 is full size; 0 makes the part vanish.",
-  "figure.text.path-translation-unit": "offset from where the part sits. 0 leaves it in place.",
   "figure.text.pick-a-shape-above-to-start": "pick a shape above to add the first part.",
-  "figure.text.picked-changes-do-not-validate": "the selected changes do not make a valid figure",
-  "figure.text.pivot-defaults-to-the-part-centre": "left unset, the part turns about its own centre. coordinates are local to the part.",
   "figure.text.placement-explained": "sets the anchor plane in 3D scene (floor: AGV/conveyor, ceiling: OHT/hoist, center: sensor/drone).",
   "figure.text.pose-as-default-explained": "Writes the pose you have set as the parameters’ defaults, so the figure stands like this when nobody gives it a value.",
   "figure.text.preview-blocked-by-errors": "cannot show the preview because of format errors. see the maturity tab for the reason.",
   "figure.text.preview-needs-a-part": "add a part to see how it looks placed on a drawing.",
-  "figure.text.proposal-feedback-note": "optional note for the next suggestion (this session only)",
-  "figure.text.proposal-feedback-placeholder": "e.g. keep the silhouette, but make the port easier to read",
   "figure.text.put-on-floor": "drop it to the floor (Z=0).",
   "figure.text.range-needs-room": "the maximum must be above the minimum.",
-  "figure.text.recipe-conveyor": "animation · an instance gives it a speed",
-  "figure.text.recipe-gate": "parameter · an instance gives how far open, 0 to 100 %",
-  "figure.text.recipe-lift": "parameter · an instance gives the height, 0 to 100 mm",
-  "figure.text.recipe-pusher": "parameter · an instance gives the travel, 0 to 100 mm",
-  "figure.text.release-check-fix": "release check fix · {part} {axis} face: {from} → {to}",
   "figure.text.release-needs-a-save-first": "there are unsaved changes. save first.",
   "figure.text.releasing": "releasing…",
   "figure.text.renaming-a-part-breaks-bindings": "renaming breaks bindings on instances already placed.",
-  "figure.text.repeat-count-capped": "up to {limit}. each copy adds one draw call.",
-  "figure.text.repeat-count-now": "{count} at the authored size",
-  "figure.text.repeat-edits-the-unit": "repeated copies are edited as one. to change a single copy, add it as a separate part.",
-  "figure.text.repeat-grows-with-instance": "the count grows as the instance grows on this axis. the pitch stays",
-  "figure.text.repeat-keeps-count": "the count stays and each copy grows.",
   "figure.text.repeat-pitch-explained": "centre-to-centre distance. it stays when the part size changes.",
   "figure.text.report-appears-when-you-add-a-part": "shows triangles, draw calls, and how many fit on one drawing. measured once you make a part.",
   "figure.text.reuse-score-explained": "how much headroom is left in the declared limits. the one closest to its cap sets the score.",
   "figure.text.revert-to-version-confirm": "revert to v{version}? what you are editing will be replaced by that version.",
-  "figure.text.role-none-means-drawn": "with none checked this is just a drawn part",
   "figure.text.rung-flow-note": "holds things and takes them in and out through ports. conveyors, chutes, sorters",
   "figure.text.rung-hold-note": "has slots to put things in. racks, pallets, benches",
   "figure.text.rung-none-note": "takes nothing. most figures belong here",
@@ -516,20 +381,12 @@
   "figure.text.server-returned-no-data": "the server response had no data. try again.",
   "figure.text.show-all-parts": "show all",
   "figure.text.show-this-part": "show this part again",
-  "figure.text.sizing-costs-one-draw-call": "a part that does not scale proportionally adds one draw call.",
-  "figure.text.sizing-fixed-explained": "the size stays, only the position follows — like a motor or a gauge.",
-  "figure.text.sizing-repeat-explained": "the count grows instead of the size. each copy adds one draw call.",
-  "figure.text.sizing-scale-explained": "this part grows with the instance.",
-  "figure.text.sizing-stretch-explained": "only one axis stretches — like a frame, a belt or a rail.",
-  "figure.text.slots-need-capability": "select \"holds things\" or above before designating a slot.",
   "figure.text.snap-explained": "rounds position and size to the grid — the same spacing you see on the canvas.",
-  "figure.text.source-changed-ask-again": "the source changed. discard the candidate and ask again in AI assist.",
   "figure.text.tags-explained": "tags used for search. separate several with commas.",
   "figure.text.tags-placeholder": "e.g. outbound, automatic, level 2",
   "figure.text.thumbnail-not-made-yet": "no thumbnail yet",
   "figure.text.tools-explained": "from left: centre X, centre Z, to floor, mirror X, mirror Z, snap to grid.",
   "figure.text.triangle-count": "{count} triangles",
-  "figure.text.two-keys-at-least": "add at least two keys.",
   "figure.text.type-name-already-taken": "the type name {type} is already in use. pick another one.",
   "figure.text.type-name-cannot-change": "the type name cannot be changed after creation.",
   "figure.text.type-name-will-not-release": "this name cannot be released. use capitals, digits and single underscores, 3 to 32 characters (e.g. AGV_LIFTER).",