@things-factory/figure-ui 10.1.37 → 10.1.39

package/translations/ms.json

@@ -226,6 +226,7 @@
   "figure.label.recipe-lift": "lif menukar ketinggian",
   "figure.label.recipe-pusher": "penolak bergerak ke kedudukan",
   "figure.label.release": "terbitkan",
+  "figure.label.release-verdict": "semakan terbitan",
   "figure.label.released-versions": "versi yang diterbitkan",
   "figure.label.repeat-axis": "axis it repeats along",
   "figure.label.repeat-count": "bilangan",
@@ -287,6 +288,11 @@
   "figure.text.budget-measured-on": "Diukur pada {gpu}, {on}. Figura yang diam tidak menelan kos — hanya yang kelihatan dan dilukis semula dikira.",
   "figure.text.budget-not-measured-yet": "this target has not been measured yet.",
   "figure.text.cannot-release-now": "belum boleh diterbitkan",
+  "figure.text.fit-needs-parts": "tiada bahagian untuk dipadankan — tambah bentuk dahulu.",
+  "figure.text.nothing-blocks-release": "tiada apa pada bentuk semasa yang menghalang penerbitan.",
+  "figure.text.verdict-asking": "sedang menyemak…",
+  "figure.text.verdict-not-received": "semakan tidak diterima — {reason}",
+  "figure.text.verdict-waiting": "semakan mengikut suntingan anda.",
   "figure.text.canvas-appears-once-a-part-exists": "pilih bentuk di sebelah kiri untuk menambah bahagian pertama.",
   "figure.text.capability-hand-written": "ditetapkan secara manual, jadi tidak sepadan dengan mana-mana tahap di atas. ia disimpan dengan nama di bawah.",
   "figure.text.capacity-from-repeat": "kapasiti ditentukan oleh tetapan ulangan dan saiz instans",
@@ -464,5 +470,77 @@
   "figure.text.what-changed-in-this-release": "apa yang berubah dalam terbitan ini",
   "figure.title.figures": "figures",
   "figure.title.new-figure": "new figure",
-  "figure.title.save-new-figure": "simpan draf figure"
+  "figure.title.save-new-figure": "simpan draf figure",
+  "figure.text.no-parts-yet": "No parts yet. Pick a shape above to place one.",
+  "figure.label.primitive-portal": "Portal",
+  "figure.label.state-hidden": "hidden in this state",
+  "figure.label.follows": "Follows",
+  "figure.text.follows-explained": "What this side grows with. Stretch the figure on a board and this follows.",
+  "figure.label.follows-nothing": "fixed",
+  "figure.label.follows-instance": "instance size",
+  "figure.label.follows-part": "another part",
+  "figure.label.times": "times",
+  "figure.label.plus": "plus (mm)",
+  "figure.label.fastening": "Fastening",
+  "figure.text.fastening-explained": "Which face of this part meets which face of which part. It stays fastened when either is resized.",
+  "figure.label.fastened-to": "fastened to",
+  "figure.label.not-fastened": "not fastened",
+  "figure.label.my-face": "my face",
+  "figure.label.target-part": "target part",
+  "figure.label.target-face": "target face",
+  "figure.label.stands-on-plane": "stand on the mounting plane",
+  "figure.label.facing-meet": "faces meet",
+  "figure.label.facing-flush": "same plane",
+  "figure.label.gap": "gap (mm)",
+  "figure.label.align": "within the face",
+  "figure.label.align-centre": "centre",
+  "figure.label.align-min": "low edge",
+  "figure.label.align-max": "high edge",
+  "figure.button.fasten": "Fasten",
+  "figure.button.detach": "Detach",
+  "figure.label.face-left": "left",
+  "figure.label.face-right": "right",
+  "figure.label.face-bottom": "bottom",
+  "figure.label.face-top": "top",
+  "figure.label.face-back": "back",
+  "figure.label.face-front": "front",
+  "figure.label.motion": "Motion",
+  "figure.text.motion-explained": "How this part moves. Added on top of its fastening, never instead of it.",
+  "figure.label.motion-none": "does not move",
+  "figure.label.motion-slide": "slide",
+  "figure.label.motion-turn": "turn",
+  "figure.label.motion-axis": "axis",
+  "figure.label.control-id": "control name",
+  "figure.label.control-unit": "unit",
+  "figure.label.control-range": "range",
+  "figure.label.control-start": "start",
+  "figure.label.travel-follows": "travel follows",
+  "figure.button.add-motion": "Add motion",
+  "figure.button.remove-motion": "Remove motion",
+  "figure.label.room": "Room it takes up",
+  "figure.text.room-explained": "Bounds computed from the parts are a proposal. Nothing is declared until you confirm, and a declaration never widens on its own.",
+  "figure.label.room-rest": "as it stands",
+  "figure.label.room-range": "over its whole motion",
+  "figure.button.propose-room": "Compute bounds",
+  "figure.button.confirm-room": "Declare these bounds",
+  "figure.label.room-undeclared": "not declared yet",
+  "figure.label.room-declared": "declared",
+  "figure.label.mounting-face": "Mounting face",
+  "figure.text.mounting-face-explained": "The face the figure is mounted on. A separate choice from the room it takes up.",
+  "figure.button.set-mounting-face": "This face",
+  "figure.button.clear-mounting-face": "Clear",
+  "figure.label.mounting-face-none": "none",
+  "figure.label.dimensions": "Dimensions",
+  "figure.label.part-id": "part id",
+  "figure.text.part-id-is-stable": "The part id is what fastenings, motions and connections point at, so it does not change.",
+  "figure.label.verdict-proven": "proven over the whole range",
+  "figure.label.verdict-sampled": "sampled",
+  "figure.label.verdict-defaults": "default state only",
+  "figure.text.verdict-sampled-explained": "An operation could not be proven, so several states were sampled. It may fail between the states checked.",
+  "figure.label.bodies-drawn": "bodies drawn",
+  "figure.label.bodies-hidden": "bodies hidden",
+  "figure.label.state-inputs": "state inputs",
+  "figure.label.design-inputs": "design inputs",
+  "figure.text.release-blocked": "Release is blocked — {count}",
+  "figure.text.release-ready": "Ready to release"
 }

package/translations/zh.json

@@ -226,6 +226,7 @@
   "figure.label.recipe-lift": "升降机改变高度",
   "figure.label.recipe-pusher": "推杆移动到位",
   "figure.label.release": "发布",
+  "figure.label.release-verdict": "发布检查",
   "figure.label.released-versions": "已发布版本",
   "figure.label.repeat-axis": "axis it repeats along",
   "figure.label.repeat-count": "数量",
@@ -287,6 +288,11 @@
   "figure.text.budget-measured-on": "于 {on} 在 {gpu} 上实测。静止的图形不产生开销 — 只计算屏幕上被重绘的部分。",
   "figure.text.budget-not-measured-yet": "this target has not been measured yet.",
   "figure.text.cannot-release-now": "现在无法发布",
+  "figure.text.fit-needs-parts": "没有可适配的部件，请先添加形状。",
+  "figure.text.nothing-blocks-release": "按当前形状，没有阻止发布的问题。",
+  "figure.text.verdict-asking": "正在检查…",
+  "figure.text.verdict-not-received": "未能获得检查结果 — {reason}",
+  "figure.text.verdict-waiting": "编辑后即会检查。",
   "figure.text.canvas-appears-once-a-part-exists": "从左侧「形状」中选择一个来添加第一个部件。",
   "figure.text.capability-hand-written": "这是手动指定的能力，不属于上面的任何级别。将以下方的名称保存。",
   "figure.text.capacity-from-repeat": "容量由重复设置和实例尺寸决定",
@@ -464,5 +470,77 @@
   "figure.text.what-changed-in-this-release": "此版本的变更",
   "figure.title.figures": "figures",
   "figure.title.new-figure": "new figure",
-  "figure.title.save-new-figure": "保存 Figure 草稿"
+  "figure.title.save-new-figure": "保存 Figure 草稿",
+  "figure.text.no-parts-yet": "No parts yet. Pick a shape above to place one.",
+  "figure.label.primitive-portal": "Portal",
+  "figure.label.state-hidden": "hidden in this state",
+  "figure.label.follows": "Follows",
+  "figure.text.follows-explained": "What this side grows with. Stretch the figure on a board and this follows.",
+  "figure.label.follows-nothing": "fixed",
+  "figure.label.follows-instance": "instance size",
+  "figure.label.follows-part": "another part",
+  "figure.label.times": "times",
+  "figure.label.plus": "plus (mm)",
+  "figure.label.fastening": "Fastening",
+  "figure.text.fastening-explained": "Which face of this part meets which face of which part. It stays fastened when either is resized.",
+  "figure.label.fastened-to": "fastened to",
+  "figure.label.not-fastened": "not fastened",
+  "figure.label.my-face": "my face",
+  "figure.label.target-part": "target part",
+  "figure.label.target-face": "target face",
+  "figure.label.stands-on-plane": "stand on the mounting plane",
+  "figure.label.facing-meet": "faces meet",
+  "figure.label.facing-flush": "same plane",
+  "figure.label.gap": "gap (mm)",
+  "figure.label.align": "within the face",
+  "figure.label.align-centre": "centre",
+  "figure.label.align-min": "low edge",
+  "figure.label.align-max": "high edge",
+  "figure.button.fasten": "Fasten",
+  "figure.button.detach": "Detach",
+  "figure.label.face-left": "left",
+  "figure.label.face-right": "right",
+  "figure.label.face-bottom": "bottom",
+  "figure.label.face-top": "top",
+  "figure.label.face-back": "back",
+  "figure.label.face-front": "front",
+  "figure.label.motion": "Motion",
+  "figure.text.motion-explained": "How this part moves. Added on top of its fastening, never instead of it.",
+  "figure.label.motion-none": "does not move",
+  "figure.label.motion-slide": "slide",
+  "figure.label.motion-turn": "turn",
+  "figure.label.motion-axis": "axis",
+  "figure.label.control-id": "control name",
+  "figure.label.control-unit": "unit",
+  "figure.label.control-range": "range",
+  "figure.label.control-start": "start",
+  "figure.label.travel-follows": "travel follows",
+  "figure.button.add-motion": "Add motion",
+  "figure.button.remove-motion": "Remove motion",
+  "figure.label.room": "Room it takes up",
+  "figure.text.room-explained": "Bounds computed from the parts are a proposal. Nothing is declared until you confirm, and a declaration never widens on its own.",
+  "figure.label.room-rest": "as it stands",
+  "figure.label.room-range": "over its whole motion",
+  "figure.button.propose-room": "Compute bounds",
+  "figure.button.confirm-room": "Declare these bounds",
+  "figure.label.room-undeclared": "not declared yet",
+  "figure.label.room-declared": "declared",
+  "figure.label.mounting-face": "Mounting face",
+  "figure.text.mounting-face-explained": "The face the figure is mounted on. A separate choice from the room it takes up.",
+  "figure.button.set-mounting-face": "This face",
+  "figure.button.clear-mounting-face": "Clear",
+  "figure.label.mounting-face-none": "none",
+  "figure.label.dimensions": "Dimensions",
+  "figure.label.part-id": "part id",
+  "figure.text.part-id-is-stable": "The part id is what fastenings, motions and connections point at, so it does not change.",
+  "figure.label.verdict-proven": "proven over the whole range",
+  "figure.label.verdict-sampled": "sampled",
+  "figure.label.verdict-defaults": "default state only",
+  "figure.text.verdict-sampled-explained": "An operation could not be proven, so several states were sampled. It may fail between the states checked.",
+  "figure.label.bodies-drawn": "bodies drawn",
+  "figure.label.bodies-hidden": "bodies hidden",
+  "figure.label.state-inputs": "state inputs",
+  "figure.label.design-inputs": "design inputs",
+  "figure.text.release-blocked": "Release is blocked — {count}",
+  "figure.text.release-ready": "Ready to release"
 }