@things-factory/figure-ui 10.1.181 → 10.1.185

package/translations/ms.json

@@ -39,7 +39,6 @@
   "figure.button.save": "save",
   "figure.button.see-the-trend-chart": "see the trend chart",
   "figure.button.snap": "jajar ke grid",
-  "figure.label.declared-space": "ruang yang diisytiharkan",
   "figure.label.follows-expression": "ditetapkan oleh ungkapan",
   "figure.label.gizmo-rotate": "putar",
   "figure.label.gizmo-scale": "saiz",
@@ -48,8 +47,6 @@
   "figure.label.position-in-proportion": "berkadar dengan saiz figura",
   "figure.label.primitive-rounded-box": "kotak bucu bulat",
   "figure.text.catalog-needs-a-save": "boleh ditetapkan selepas disimpan.",
-  "figure.text.declared-space-declared": "diisytiharkan daripada bahagian.",
-  "figure.text.declared-space-none": "belum diisytiharkan.",
   "figure.text.fasten-would-loop": "bahagian itu sudah dipasang pada bahagian ini, jadi ia tidak boleh dipasang sebaliknya.",
   "figure.text.follow-would-loop": "dimensi itu sudah mengikut bahagian ini, jadi kedua-duanya tidak boleh saling mengikut.",
   "figure.text.links-need-a-box": "ikut saiz untuk bahagian berbentuk kotak, pasangan untuk kotak dan silinder.",
@@ -90,11 +87,9 @@
   "figure.text.size-range-part-gone": "pada saiznya sekarang, {at} mm pada {axis}, satu bahagian sudah tiada panjang. ubah pautan atau saiz.",
   "figure.text.input-range-size": "saiz rajah {axis} hanya boleh ditetapkan antara {min} dan {max} mm. nilai diberi: {value} mm",
   "figure.text.input-range": "nilai ini hanya boleh ditetapkan antara {min} dan {max}. nilai diberi: {value}",
-  "figure.text.mounting-face-needs-space": "isytiharkan ruang dahulu untuk memilih.",
   "figure.text.part-is-referenced": "'{part}' tidak boleh dipadam: bahagian lain menggunakan nilainya seperti sedia ada.",
   "figure.text.part-name-invalid": "'{name}' tidak boleh menjadi nama bahagian. Mulakan dengan huruf dan gunakan huruf, digit, - dan _.",
   "figure.text.part-name-taken": "'{name}' sudah digunakan dalam bentuk ini.",
-  "figure.text.placement-redeclares": "menukarnya mengisytiharkan semula ruang daripada bahagian semasa.",
   "figure.text.show-affected-parts": "tunjukkan bahagian terjejas",
   "figure.button.to-floor": "to floor",
   "figure.label.accepts": "diterima",
@@ -530,7 +525,6 @@
   "figure.label.fastened-to": "fastened to",
   "figure.label.not-fastened": "not fastened",
   "figure.label.my-face": "my face",
-  "figure.label.target-part": "target part",
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
@@ -560,6 +554,10 @@
   "figure.text.preview-face-unknown": "Muka ini tidak dapat ditunjukkan pada kanvas.",
   "figure.text.target-would-loop": "{part} — dilekatkan pada {mine}, tidak boleh dipilih",
   "figure.label.fasten-detail": "Butiran",
+  "figure.label.fasten-what": "Pada bahagian mana",
+  "figure.label.fasten-face-on-part": "Pada muka {part} yang mana",
+  "figure.label.fasten-face-on-plane": "Di mana pada {plane}",
+  "figure.label.fasten-how": "Bagaimana diletakkan",
   "figure.label.facing": "Cara muka bertemu",
   "figure.text.fasten-summary-gap": "jarak {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "jarak ditentukan oleh formula",
@@ -598,10 +596,8 @@
   "figure.label.room-undeclared": "not declared yet",
   "figure.label.room-declared": "Diisytiharkan sekarang",
   "figure.label.mounting-face": "Mounting face",
-  "figure.text.mounting-face-explained": "The face the figure is mounted on. A separate choice from the room it takes up.",
-  "figure.button.set-mounting-face": "This face",
   "figure.button.clear-mounting-face": "Clear",
-  "figure.label.mounting-face-none": "none",
+  "figure.text.mounting-face-unchecked-at-center": "tidak disemak untuk figure di tengah",
   "figure.label.dimensions": "Dimensions",
   "figure.label.part-id": "part id",
   "figure.text.part-id-is-stable": "The part id is what fastenings, motions and connections point at, so it does not change.",
@@ -675,7 +671,6 @@
   "figure.label.group-figure-size": "Saiz rajah",
   "figure.label.group-part": "Bahagian",
   "figure.label.group-figure": "Rajah",
-  "figure.label.group-standing": "Kedudukan letak",
   "figure.label.group-catalog": "Maklumat katalog",
   "figure.button.control-settings": "Nama, julat dan masa",
   "figure.label.align-x": "kiri-kanan",
@@ -877,10 +872,8 @@
   "figure.button.show-model-settings": "Tunjukkan tetapan model",
   "figure.text.new-figure-name": "Rajah baharu",
   "figure.text.fasten-editing": "Menyunting lekatan semasa: {face} pada {target}",
-  "figure.text.fasten-new": "Lekatkan baharu",
   "figure.text.fasten-start": "Lekatkan bahagian ini pada muka bahagian lain supaya hubungannya kekal apabila salah satu berubah.",
   "figure.button.fasten-start": "Lekatkan pada bahagian lain",
-  "figure.label.target-part-placeholder": "Pilih bahagian",
   "figure.text.fasten-target-first": "Pilih bahagian yang hendak dilekatkan dahulu.",
   "figure.text.fasten-edit-on-plane": "Bahagian ini disambungkan kepada rujukan peletakan model. Tanggalkan dahulu sebelum melekatkannya pada bahagian lain.",
   "figure.button.align-to-floor": "Jajarkan ke lantai",

package/translations/zh.json

@@ -39,7 +39,6 @@
   "figure.button.save": "save",
   "figure.button.see-the-trend-chart": "see the trend chart",
   "figure.button.snap": "对齐网格",
-  "figure.label.declared-space": "空间声明",
   "figure.label.follows-expression": "由表达式决定",
   "figure.label.gizmo-rotate": "旋转",
   "figure.label.gizmo-scale": "尺寸",
@@ -48,8 +47,6 @@
   "figure.label.position-in-proportion": "按图形尺寸比例",
   "figure.label.primitive-rounded-box": "圆角盒",
   "figure.text.catalog-needs-a-save": "保存后即可设置。",
-  "figure.text.declared-space-declared": "已根据部件声明。",
-  "figure.text.declared-space-none": "尚未声明。",
   "figure.text.fasten-would-loop": "该部件已固定在此部件上，不能反向固定。",
   "figure.text.follow-would-loop": "该尺寸已跟随此部件，二者不能互相跟随。",
   "figure.text.links-need-a-box": "尺寸跟随适用于盒形部件，固定适用于盒形和圆柱部件。",
@@ -90,11 +87,9 @@
   "figure.text.size-range-part-gone": "在当前尺寸 {at} mm（{axis} 轴）下，已有部件长度为 0。请修改链接或尺寸。",
   "figure.text.input-range-size": "图形尺寸 {axis} 只能设置在 {min} 到 {max} mm 之间。输入值：{value} mm",
   "figure.text.input-range": "此值只能设置在 {min} 到 {max} 之间。输入值：{value}",
-  "figure.text.mounting-face-needs-space": "请先声明空间，然后才能选择。",
   "figure.text.part-is-referenced": "其他部件直接使用 '{part}' 的值，无法删除。",
   "figure.text.part-name-invalid": "'{name}' 不能作为部件名称。请以字母开头，只使用字母、数字、- 和 _。",
   "figure.text.part-name-taken": "'{name}' 在此图形中已被使用。",
-  "figure.text.placement-redeclares": "更改后将按当前部件重新声明空间。",
   "figure.text.show-affected-parts": "查看受影响部件",
   "figure.button.to-floor": "to floor",
   "figure.label.accepts": "接受的类型",
@@ -530,7 +525,6 @@
   "figure.label.fastened-to": "fastened to",
   "figure.label.not-fastened": "not fastened",
   "figure.label.my-face": "my face",
-  "figure.label.target-part": "target part",
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
@@ -560,6 +554,10 @@
   "figure.text.preview-face-unknown": "此面无法在画布上显示。",
   "figure.text.target-would-loop": "{part} — 已附着于 {mine},无法选择",
   "figure.label.fasten-detail": "详细",
+  "figure.label.fasten-what": "附着到哪个部件",
+  "figure.label.fasten-face-on-part": "{part}的哪个面",
+  "figure.label.fasten-face-on-plane": "{plane}上的哪里",
+  "figure.label.fasten-how": "如何放置",
   "figure.label.facing": "接触方式",
   "figure.text.fasten-summary-gap": "间距 {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "间距由公式决定",
@@ -598,10 +596,8 @@
   "figure.label.room-undeclared": "not declared yet",
   "figure.label.room-declared": "当前声明",
   "figure.label.mounting-face": "Mounting face",
-  "figure.text.mounting-face-explained": "The face the figure is mounted on. A separate choice from the room it takes up.",
-  "figure.button.set-mounting-face": "This face",
   "figure.button.clear-mounting-face": "Clear",
-  "figure.label.mounting-face-none": "none",
+  "figure.text.mounting-face-unchecked-at-center": "中心放置，不检查",
   "figure.label.dimensions": "Dimensions",
   "figure.label.part-id": "part id",
   "figure.text.part-id-is-stable": "The part id is what fastenings, motions and connections point at, so it does not change.",
@@ -675,7 +671,6 @@
   "figure.label.group-figure-size": "图形尺寸",
   "figure.label.group-part": "部件",
   "figure.label.group-figure": "图形",
-  "figure.label.group-standing": "放置方式",
   "figure.label.group-catalog": "目录信息",
   "figure.button.control-settings": "名称 · 范围 · 时间",
   "figure.label.align-x": "左右位置",
@@ -877,10 +872,8 @@
   "figure.button.show-model-settings": "查看模型设置",
   "figure.text.new-figure-name": "新 Figure",
   "figure.text.fasten-editing": "编辑当前附着：{face}附着在{target}上",
-  "figure.text.fasten-new": "新建附着",
   "figure.text.fasten-start": "将此部件附着到另一部件的面上，任一部件变化时都会保持该关系。",
   "figure.button.fasten-start": "附着到另一部件",
-  "figure.label.target-part-placeholder": "选择部件",
   "figure.text.fasten-target-first": "请先选择要附着的部件。",
   "figure.text.fasten-edit-on-plane": "此部件当前连接到模型的安装基准。附着到另一部件前请先解除连接。",
   "figure.button.align-to-floor": "对齐地面",

package/client/modeller/mounting-part.ts

@@ -1,15 +0,0 @@
-import type { FigureFace } from '@hatiolab/figure-model'
-import type { FigureFigureFacts } from './figure-facts.js'
-
-/**
- * The mounting face the properties tab offers: the part and face picked in its lists, else the one set, else where the
- * figure meets its plane (`suggested`) -- a conveyor's legs, not its bed (walk 1, 2026-09-26) -- else the first part.
- * A part no longer in the figure is passed over.
- */
-export function offeredMountingOf(
-  facts: Pick<FigureFigureFacts, 'parts' | 'mounting' | 'suggested'>,
-  picked: { part?: string; face?: FigureFace } = {}
-): { part?: string; face: FigureFace } {
-  const part = [picked.part, facts.mounting?.part, facts.suggested?.part, facts.parts[0]].find(one => one && facts.parts.includes(one))
-  return { part, face: picked.face ?? facts.mounting?.face ?? facts.suggested?.face ?? 'bottom' }
-}