@things-factory/figure-ui 10.1.181 → 10.1.185

package/test/browser/section.check.mjs

@@ -521,40 +521,32 @@ describe('the inside\'s drawing in the 단면 group', () => {
   })
 })
 
-describe('the fastening drawing in the fastening form', () => {
+describe('the fastening drawing in the fastening window', () => {
   const labels = () => read(() => probe.fastenForm().map(s => s.label))
-  const target = () => read(() => probe.fastenForm().find(s => s.label === 'figure.label.target-part'))
-  /* A fastening the part has is said in one line; 「바꾸기」 opens the drawing (chief architect 2026-10-16). */
-  const change = () => press('button[change-fastening]')
+  const targets = () => read(() => probe.fastenTargets())
+  /* A fastening the part has is said in one line; 「바꾸기」 opens the window on it (user 2026-10-17). */
+  const change = async () => {
+    await press('button[change-fastening]')
+    await until(() => !!probe.fastenTargets(), 'the fastening window')
+  }
 
-  test('the part\'s own face and the facing are not asked: the target, its face and how are drawn', async () => {
+  test('the part\'s own face and the facing are not asked: what, which face and how, the face and the way drawn', async () => {
     await mount('arm')
     await pick('forearm')
     await change()
     const asked = await labels()
-    assert.ok(asked.includes('figure.label.target-part'))
+    assert.deepEqual(asked.slice(0, 3), ['figure.label.fasten-what', 'figure.label.fasten-face-on-part', 'figure.label.fasten-how'])
     assert.ok(!asked.includes('figure.label.my-face') && !asked.includes('figure.label.facing'), `asked: ${asked}`)
     assert.ok(await read(() => !!probe.fastenDrawing()), 'the drawing in their place')
   })
 
-  test('a fastened part: a face of the target pressed is one step', async () => {
+  test('a fastened part: a face of the target pressed, flush pressed, the footprint dragged -- tried, nothing written', async () => {
     const start = await state()
     const was = await read(() => probe.fastening('forearm'))
     const face = was.body0.face === 'front' ? 'right' : 'front'
     await press(`[face="${face}"]`, { within: 'figure-fasten-drawing' })
-    await until(r => probe.state().revision === r + 1, 'one step', start.revision)
-    assert.equal((await read(() => probe.fastening('forearm'))).body0.face, face)
-  })
-
-  test('a fastened part: flush pressed is one step, and the drawing shows it', async () => {
-    const start = await state()
     await press('button[mode="flush"]', { within: 'figure-fasten-drawing' })
-    await until(r => probe.state().revision === r + 1, 'one step', start.revision)
-    assert.equal(await read(() => probe.fastenMode()), 'flush')
-  })
-
-  test('a fastened part: the footprint dragged on the face and let go is one step', async () => {
-    const start = await state()
+    await until(() => probe.fastenMode() === 'flush', 'the drawing shows flush')
     const foot = await element('g[footprint] rect', { within: 'figure-fasten-drawing' })
     const at = await foot.evaluate(e => {
       e.scrollIntoView({ block: 'center' })
@@ -565,25 +557,46 @@ describe('the fastening drawing in the fastening form', () => {
     await page().mouse.down()
     for (let i = 1; i <= 5; i++) await page().mouse.move(at.x + 6 * i, at.y)
     await page().mouse.up()
+    await sleep(300)
+    assert.equal((await state()).revision, start.revision, 'nothing written while trying')
+    assert.deepEqual(await read(() => probe.fastening('forearm')), was)
+  })
+
+  test('a fastened part: 적용 writes all of it as one step', async () => {
+    const start = await state()
+    const was = await read(() => probe.fastening('forearm'))
+    const face = was.body0.face === 'front' ? 'right' : 'front'
+    await press('[apply]', { within: 'figure-fasten-dialog' })
     await until(r => probe.state().revision === r + 1, 'one step', start.revision)
     await sleep(300)
     assert.equal((await state()).revision, start.revision + 1, 'and only one')
+    const now = await read(() => probe.fastening('forearm'))
+    assert.deepEqual([now.body0.face, now.origin?.facing], [face, 'flush'])
   })
 
   test('fastened to the plane: the plane is named by the placement, chosen, and set on only', async () => {
     await mount('rollers')
     await pick('bed')
     await change()
-    const list = await target()
-    assert.equal(list.value, '__plane')
-    assert.equal(list.options.find(o => o.value === '__plane').text, 'figure.label.resize-place-floor')
+    const list = await targets()
+    const plane = list.find(t => t.target === '__plane')
+    assert.deepEqual([plane.selected, plane.text], [true, 'figure.label.resize-place-floor'])
+    assert.equal((await labels())[1], 'figure.label.fasten-face-on-plane', 'the face asked on the floor, not of a part')
     assert.deepEqual((await read(() => probe.fastenDrawing())).modes, [], 'one way only: no choice offered')
   })
 
+  /* The window is a popup over the work: closed, nothing written, before another part is picked. */
+  const cancel = async () => {
+    await press('[cancel]', { within: 'figure-fasten-dialog' })
+    await until(() => !probe.fastenTargets(), 'the window closed')
+  }
+
   test('a part that turns in place may have its centre on the face; a part that does not, not', async () => {
+    await cancel()
     await pick('roller')
     await change()
     assert.deepEqual((await read(() => probe.fastenDrawing())).modes, ['meet', 'flush', 'centre'])
+    await cancel()
     await pick('mark')
     await change()
     assert.deepEqual((await read(() => probe.fastenDrawing())).modes, ['meet', 'flush'])
@@ -592,19 +605,15 @@ describe('the fastening drawing in the fastening form', () => {
   test('a new fastening waits for 붙이기; the part\'s own face follows the target\'s face and how', async () => {
     await mount('door')
     await pick('leaf')
-    await press('button[act]', { has: 'figure.button.fasten-start' })
-    await until(() => probe.fastenForm().some(s => s.label === 'figure.label.target-part'), 'the target asked')
-    const targetSelect = await page().evaluateHandle(() => {
-      const deep = (root = document) => [...root.querySelectorAll('select')].concat(...[...root.querySelectorAll('*')].filter(e => e.shadowRoot).map(e => deep(e.shadowRoot)))
-      return deep().find(s => s.previousElementSibling?.textContent?.trim() === 'figure.label.target-part') ?? null
-    })
-    await targetSelect.select('frame')
+    await press('button[fasten-start]')
+    await until(() => !!probe.fastenTargets(), 'the window')
+    await press('md-filter-chip[data-value="frame"]', { within: 'figure-fasten-dialog' })
     await until(() => !!probe.fastenDrawing(), 'the fastening drawing')
     const start = await state()
     await press('[face="front"]', { within: 'figure-fasten-drawing' })
     await sleep(300)
     assert.equal((await state()).revision, start.revision, 'nothing sent before 붙이기')
-    await press('button[act]', { text: 'linkfigure.button.fasten' })
+    await press('[apply]', { within: 'figure-fasten-dialog', has: 'figure.button.fasten' })
     await until(r => probe.state().revision === r + 1, 'one step', start.revision)
     const joint = await read(() => probe.fastening('leaf'))
     assert.deepEqual(joint.body0, { part: 'frame', face: 'front' })

package/test/fasten-form.test.ts

@@ -0,0 +1,77 @@
+/*
+ * The fastening as it is chosen in the window (`fasten-form.ts`): opened on what the part has, aimed, changed by the
+ * drawing, and the one attach command worked out from it -- the command the window applies, its preview shows and the
+ * panel's 「정렬 고치기」 sends.
+ */
+import { test } from 'node:test'
+import assert from 'node:assert/strict'
+
+import { addFigureBox, applyFigureAuthoring, createFigureAsset } from '@hatiolab/figure-model'
+import type { FigureAsset } from '@hatiolab/figure-model'
+
+import { aimFasten, fastenChanged, fastenDetailWordsOf, fastenFormOf, fastenPlanOf, fastenSentenceOf, fastenTargetsOf, freshFasten } from '../client/modeller/fasten-form.ts'
+import { revisionOf } from './revision-of.ts'
+
+const box = (asset: FigureAsset, id: string, [x, y, z]: number[], at = [0, 0, 0]) => addFigureBox(asset, { id, size: { x, y, z }, position: { x: at[0]!, y: at[1]!, z: at[2]! } })
+const fasten = (asset: FigureAsset, part: string, to: string, more = {}) =>
+  applyFigureAuthoring(asset, { kind: 'attach', part, face: 'bottom', to: to === 'plane' ? { plane: 'mounting-plane' } : { part: to, face: 'top' }, ...more } as never)
+
+/* A frame on the floor, a roller on the frame 300 mm off its centre, a loose lid beside them. */
+function conveyor() {
+  let a = fasten(box(createFigureAsset('Conveyor'), 'frame', [2000, 100, 600], [0, 50, 0]), 'frame', 'plane')
+  a = fasten(box(a, 'roller', [60, 60, 560], [300, 130, 0]), 'roller', 'frame', { align: { x: { mm: 300 } } })
+  return revisionOf(box(a, 'lid', [100, 20, 100], [1500, 10, 0]))
+}
+const say = (key: string, params: Record<string, string> = {}) => `${key}(${Object.entries(params).map(([k, v]) => `${k}=${v}`).join(',')})`
+
+test('opened on what the part has; a loose part opens on nothing chosen', () => {
+  const r = conveyor()
+  const own = fastenFormOf(r, 'roller')
+  assert.deepEqual([own.target, own.targetFace, own.toPlane, own.align.x, own.alignMm.x], ['frame', 'top', false, 'mm', 300])
+  assert.deepEqual(fastenFormOf(r, 'lid'), freshFasten())
+  assert.equal(fastenPlanOf(r, 'lid', fastenFormOf(r, 'lid')).action, undefined, 'nothing to apply until something is chosen')
+})
+
+test('the one it has, unchanged, comes to the attach that replaces it with the same place across the face', () => {
+  const r = conveyor()
+  const plan = fastenPlanOf(r, 'roller', fastenFormOf(r, 'roller'))
+  assert.deepEqual(plan.action, { kind: 'attach', part: 'roller', face: 'bottom', to: { part: 'frame', face: 'top' }, facing: 'meet', twist: 0, align: { x: { mm: 300 } }, replace: true })
+  assert.deepEqual(plan.face, { part: 'frame', face: 'top' }, 'the face it meets, lit while tried')
+  assert.equal(fastenSentenceOf('roller', fastenFormOf(r, 'roller'), plan, '바닥', say), 'figure.text.fasten-sentence-meet(part=roller,face=figure.label.face-bottom(),to=frame의 figure.label.face-top())')
+})
+
+test('aimed at a part, the loose lid keeps its place across the face; aimed at the plane, nothing is said of a part face', () => {
+  const r = conveyor()
+  const onFrame = aimFasten(r, 'lid', fastenFormOf(r, 'lid'), { part: 'frame' })
+  assert.deepEqual([onFrame.target, onFrame.toPlane, onFrame.align.x, onFrame.alignMm.x], ['frame', false, 'mm', 1500])
+  const plan = fastenPlanOf(r, 'lid', onFrame)
+  assert.equal((plan.action as { replace: boolean }).replace, false, 'a new fastening')
+  const onPlane = fastenPlanOf(r, 'lid', aimFasten(r, 'lid', onFrame, { plane: true }))
+  assert.deepEqual((onPlane.action as { to: unknown }).to, { plane: 'mounting-plane' })
+  assert.equal(onPlane.face, undefined)
+})
+
+test('the drawing\'s changes: another face aims again, the way, the gap, a place across the face', () => {
+  const r = conveyor()
+  let f = fastenFormOf(r, 'roller')
+  f = fastenChanged(r, 'roller', f, { mode: 'flush' })
+  assert.equal(f.facing, 'flush')
+  f = fastenChanged(r, 'roller', f, { gap: 40 })
+  assert.deepEqual([f.gap, f.gapKept], [40, undefined])
+  f = fastenChanged(r, 'roller', f, { axis: 'x', how: 'max' })
+  assert.equal(f.align.x, 'max')
+  assert.deepEqual(fastenDetailWordsOf(f, say), ['figure.text.fasten-summary-gap(mm=40)'])
+  const action = fastenPlanOf(r, 'roller', f).action as { facing: string; gap: number; align: unknown }
+  assert.deepEqual([action.facing, action.gap, action.align], ['flush', 40, { x: 'max' }])
+  f = fastenChanged(r, 'roller', f, { targetFace: 'front' })
+  assert.equal(fastenPlanOf(r, 'roller', f).targetFace, 'front')
+})
+
+test('the target list: every other part, the one hanging from this part listed as a loop', () => {
+  const r = conveyor()
+  assert.deepEqual(fastenTargetsOf(r, 'frame'), [
+    { part: 'roller', loops: true },
+    { part: 'lid', loops: false }
+  ])
+  assert.deepEqual(fastenTargetsOf(r, 'lid').map(t => t.part), ['frame', 'roller'])
+})

package/test/fasten-geometry.test.ts

@@ -87,6 +87,8 @@ test('the drawing\'s two names do not lie over each other (user 2026-10-16: 「r
   assert.deepEqual(thin.face, { x: 20, y: 55 })
   assert.equal(thin.part.inside, false)
   assert.ok(thin.part.y > 63 + 84 || thin.part.y < 63, 'outside the part')
+  /* As tall as the face, almost: under the part is the face's edge, and the name goes under that line (2026-10-18). */
+  assert.ok(thin.part.y - 11 >= face.y + face.h + 2, `clear of the face's edge: ${thin.part.y}`)
   /* A wide block: its name in it. */
   const wide = fastenLabelsOf(face, { x: 120, y: 80, w: 100, h: 40 }, 'lid', 180)
   assert.deepEqual(wide.part, { x: 170, y: 104, inside: true })

package/test/first-minute.test.ts

@@ -52,11 +52,14 @@ test('the start card and the figure panel choose the placement as the figure\'s
 })
 
 /* B.1 and the designer's items (2026-09-27): each target's panel is found as it was left; the fastening form says which it is. */
-test('the fastening form says whether it edits the current relation or fastens anew', () => {
-  /* Anew is said, the one it has changed at once, 붙이기 only for a new one: the browser check's (test/browser/screen.check.mjs). Here, the words. */
+test('the fastening window says by its button whether it changes the one the part has or fastens anew', () => {
+  /* 붙이기 for a new one, 적용 for the one it has, nothing more said: the browser check's (test/browser/screen.check.mjs). Here, the words. */
   const ko = JSON.parse(read('../translations/ko.json'))
-  assert.equal(ko['figure.text.fasten-new'], '새로 붙이기')
-  assert.equal(ko['figure.button.fasten-update'], undefined)
+  assert.equal(ko['figure.button.fasten'], '붙이기')
+  assert.equal(ko['figure.button.apply'], '적용')
+  assert.equal(ko['figure.text.fasten-new'], undefined)
+  /* The questions point at the result sentence's pieces: which part, which of its faces, how it is set there (user 2026-10-18). */
+  assert.deepEqual(['figure.label.fasten-what', 'figure.label.fasten-face-on-part', 'figure.label.fasten-face-on-plane', 'figure.label.fasten-how'].map(k => ko[k]), ['어느 부품에', '{part}의 어느 면에', '{plane}의 어디에', '어떻게 놓을지'])
 })
 
 test('a measure that follows something says what, where the row once said 「다른 규칙에 연결됨」 (user 2026-10-16)', () => {

package/test/properties.test.ts

@@ -13,7 +13,6 @@ import { addFigureBox, applyFigureAuthoring, createFigureAsset, inspectFigureAss
 
 import { tagsOf, figureFigureFacts } from '../client/modeller/figure-facts.ts'
 import { occupancyFromParts } from '../client/modeller/occupancy.ts'
-import { offeredMountingOf } from '../client/modeller/mounting-part.ts'
 import { revisionOf } from './revision-of.ts'
 import { wordsOf } from './words.ts'
 
@@ -25,11 +24,10 @@ const probe = () => {
 }
 const facts = (asset: ReturnType<typeof probe>) => figureFigureFacts(revisionOf(asset))
 
-test('탭이 읽는 사실 — 선언 전에는 배치 기준도 장착면도 「없음」이다', () => {
+test('탭이 읽는 사실 — 이름, 놓이는 곳, 이름 붙은 장착면뿐이다', () => {
   const read = facts(probe())
+  assert.deepEqual(Object.keys(read).sort(), ['mounting', 'name', 'placement'])
   assert.equal(read.name, 'Probe')
-  assert.deepEqual(read.parts, ['body'])
-  assert.equal(read.declared, false)
   assert.equal(read.placement, undefined, '없는 것을 바닥으로 읽지 않는다')
   assert.equal(read.mounting, undefined)
 })
@@ -39,7 +37,6 @@ test('배치 기준을 고르면 그 기준으로 공간을 선언한다 — 판
   const declared = applyFigureAuthoring(parseFigureAsset(source), occupancyFromParts(parseFigureAsset(source), 'ceiling'))
 
   assert.equal(facts(declared).placement, 'ceiling')
-  assert.equal(facts(declared).declared, true)
   assert.ok(!inspectFigureAsset(declared).violations.some(v => v.code === 'OCCUPANCY_UNDECLARED'))
 })
 
@@ -78,18 +75,13 @@ test('속성 탭의 말은 다섯 말 모두에 있다', () => {
   }
 })
 
-/* Walk 1 (2026-09-26): the mounting face offered is where the figure meets its plane -- a conveyor's legs, not its bed. */
-test('장착면은 도형이 평면에 닿는 부품으로 권한다 — 다리 위 바닥이 아니라 다리', async () => {
-  const fm = await import('@hatiolab/figure-model')
-  let asset = fm.addFigureBox(fm.createFigureAsset('Conveyor'), { id: 'bed', size: { x: 3000, y: 700, z: 800 }, position: { x: 0, y: 1050, z: 0 } })
-  asset = fm.addFigureBox(asset, { id: 'leg', size: { x: 60, y: 700, z: 60 }, position: { x: -1400, y: 350, z: -300 } })
-  asset = fm.applyFigureAuthoring(asset, { kind: 'attach', part: 'leg', face: 'top', to: { part: 'bed', face: 'bottom' }, align: { x: 'min', z: 'min' } })
-  const facts = figureFigureFacts(revisionOf(asset))
-  assert.deepEqual(facts.suggested, { part: 'leg', face: 'bottom' })
-  assert.equal(facts.parts[0], 'bed', '목록의 첫 부품은 바닥이다')
-  assert.deepEqual(offeredMountingOf(facts), { part: 'leg', face: 'bottom' }, 'where it meets its plane')
-  assert.deepEqual(offeredMountingOf(facts, { part: 'bed', face: 'top' }), { part: 'bed', face: 'top' }, 'a part picked comes first')
-  assert.deepEqual(offeredMountingOf({ ...facts, mounting: { part: 'bed', face: 'bottom' } }), { part: 'bed', face: 'bottom' }, 'then the one set, before the suggestion')
-  assert.deepEqual(offeredMountingOf(facts, { part: 'gone' }), { part: 'leg', face: 'bottom' }, 'a part no longer there is passed over')
-  assert.deepEqual(offeredMountingOf({ parts: ['bed'] }), { part: 'bed', face: 'bottom' }, 'nothing to suggest: the first part')
+/*
+ * The walk without the standing group (user 2026-10-18): nothing on the tab declares the room or names a face. The
+ * room is declared where release asks for it; whether the figure meets its plane the release check says from the parts.
+ */
+test('속성 탭에는 공간을 정하거나 장착면을 고르는 명령이 없다 — 이름 붙은 장착면을 떼는 것만 있다', () => {
+  const tab = read('../client/modeller/figure-properties.ts')
+  const kinds = [...tab.matchAll(/kind: '([a-z-]+)'/g)].map(m => m[1]).sort()
+  assert.deepEqual(kinds, ['clear-mounting-face', 'rename', 'set-placement'])
+  assert.doesNotMatch(tab, /occupancyFromParts|declare-occupancy|set-mounting-face/)
 })

package/translations/en.json

@@ -39,7 +39,6 @@
   "figure.button.save": "save",
   "figure.button.see-the-trend-chart": "see the trend chart",
   "figure.button.snap": "align to grid",
-  "figure.label.declared-space": "space it takes",
   "figure.label.follows-expression": "set by an expression",
   "figure.label.gizmo-rotate": "turn",
   "figure.label.gizmo-scale": "size",
@@ -48,8 +47,6 @@
   "figure.label.position-in-proportion": "in proportion to the figure size",
   "figure.label.primitive-rounded-box": "rounded box",
   "figure.text.catalog-needs-a-save": "can be set once the figure is saved.",
-  "figure.text.declared-space-declared": "fitted to the parts",
-  "figure.text.declared-space-none": "not set",
   "figure.text.fasten-would-loop": "that part is already fastened to this one, so it cannot be fastened the other way.",
   "figure.text.follow-would-loop": "that dimension already follows this part, so the two cannot follow each other.",
   "figure.text.links-need-a-box": "size following works on box-shaped parts, fastening on boxes and cylinders.",
@@ -90,11 +87,9 @@
   "figure.text.size-range-part-gone": "at its size now, {at} mm on {axis}, a part already has no length. change the link or the size.",
   "figure.text.input-range-size": "figure size {axis} can only be set between {min} and {max} mm. value given: {value} mm",
   "figure.text.input-range": "this value can only be set between {min} and {max}. value given: {value}",
-  "figure.text.mounting-face-needs-space": "declare the space first to choose one.",
   "figure.text.part-is-referenced": "'{part}' cannot be deleted: another part uses its values as they are.",
   "figure.text.part-name-invalid": "'{name}' cannot be a part name. Start with a letter and use letters, digits, - and _.",
   "figure.text.part-name-taken": "'{name}' is already used in this figure.",
-  "figure.text.placement-redeclares": "changing it declares the space again from the parts as they are now.",
   "figure.text.show-affected-parts": "show affected parts",
   "figure.button.to-floor": "to floor",
   "figure.label.accepts": "accepts",
@@ -530,7 +525,6 @@
   "figure.label.fastened-to": "fastened to",
   "figure.label.not-fastened": "not fastened",
   "figure.label.my-face": "my face",
-  "figure.label.target-part": "target part",
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
@@ -560,6 +554,10 @@
   "figure.text.preview-face-unknown": "This face cannot be shown on the canvas.",
   "figure.text.target-would-loop": "{part} — attached to {mine}, cannot be chosen",
   "figure.label.fasten-detail": "Details",
+  "figure.label.fasten-what": "Which part",
+  "figure.label.fasten-face-on-part": "Which face of {part}",
+  "figure.label.fasten-face-on-plane": "Where on the {plane}",
+  "figure.label.fasten-how": "How it sits",
   "figure.label.facing": "How faces meet",
   "figure.text.fasten-summary-gap": "gap {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "gap worked out by a formula",
@@ -598,10 +596,8 @@
   "figure.label.room-undeclared": "not set",
   "figure.label.room-declared": "Declared now",
   "figure.label.mounting-face": "Mounting face",
-  "figure.text.mounting-face-explained": "The face the figure is mounted on. A separate choice from the room it takes up.",
-  "figure.button.set-mounting-face": "This face",
   "figure.button.clear-mounting-face": "Clear",
-  "figure.label.mounting-face-none": "none",
+  "figure.text.mounting-face-unchecked-at-center": "not checked for a centred figure",
   "figure.label.dimensions": "Dimensions",
   "figure.label.part-id": "part id",
   "figure.text.part-id-is-stable": "The part id is what fastenings, motions and connections point at, so it does not change.",
@@ -675,7 +671,6 @@
   "figure.label.group-figure-size": "Size",
   "figure.label.group-part": "Part",
   "figure.label.group-figure": "Figure",
-  "figure.label.group-standing": "Where it stands",
   "figure.label.group-catalog": "Catalogue",
   "figure.button.control-settings": "Name, range and time",
   "figure.label.align-x": "left-right",
@@ -877,10 +872,8 @@
   "figure.button.show-model-settings": "Show model settings",
   "figure.text.new-figure-name": "New figure",
   "figure.text.fasten-editing": "Editing the current attachment: its {face} on {target}",
-  "figure.text.fasten-new": "Attach anew",
   "figure.text.fasten-start": "Attach this part to a face on another part so they keep their relationship when either changes.",
   "figure.button.fasten-start": "Attach to another part",
-  "figure.label.target-part-placeholder": "Choose a part",
   "figure.text.fasten-target-first": "Choose the part to attach to first.",
   "figure.text.fasten-edit-on-plane": "This part is connected to the model's placement reference. Detach it before attaching it to another part.",
   "figure.button.align-to-floor": "set on the floor",

package/translations/es.json

@@ -39,7 +39,6 @@
   "figure.button.save": "guardar",
   "figure.button.see-the-trend-chart": "ver el gráfico de tendencia",
   "figure.button.snap": "ajustar a la cuadrícula",
-  "figure.label.declared-space": "espacio declarado",
   "figure.label.follows-expression": "definido por una expresión",
   "figure.label.gizmo-rotate": "girar",
   "figure.label.gizmo-scale": "tamaño",
@@ -48,8 +47,6 @@
   "figure.label.position-in-proportion": "en proporción al tamaño de la figura",
   "figure.label.primitive-rounded-box": "caja redondeada",
   "figure.text.catalog-needs-a-save": "se puede definir una vez guardada la figura.",
-  "figure.text.declared-space-declared": "declarado a partir de las piezas.",
-  "figure.text.declared-space-none": "aún no declarado.",
   "figure.text.fasten-would-loop": "esa pieza ya está sujeta a esta, por lo que no se puede sujetar en sentido inverso.",
   "figure.text.follow-would-loop": "esa dimensión ya sigue a esta pieza, por lo que no pueden seguirse mutuamente.",
   "figure.text.links-need-a-box": "el seguimiento de tamaño funciona en piezas con forma de caja; la sujeción, en cajas y cilindros.",
@@ -90,11 +87,9 @@
   "figure.text.size-range-part-gone": "con su tamaño actual, {at} mm en {axis}, una pieza ya no tiene longitud. cambie el vínculo o el tamaño.",
   "figure.text.input-range-size": "el tamaño de la figura en {axis} solo se puede definir entre {min} y {max} mm. valor introducido: {value} mm",
   "figure.text.input-range": "este valor solo se puede definir entre {min} y {max}. valor introducido: {value}",
-  "figure.text.mounting-face-needs-space": "declare primero el espacio para poder elegir una.",
   "figure.text.part-is-referenced": "'{part}' no se puede eliminar: otra pieza usa sus valores tal cual.",
   "figure.text.part-name-invalid": "'{name}' no puede ser un nombre de pieza. Empiece por una letra y use letras, dígitos, - y _.",
   "figure.text.part-name-taken": "'{name}' ya se usa en esta figura.",
-  "figure.text.placement-redeclares": "al cambiarlo se vuelve a declarar el espacio a partir de las piezas tal como están ahora.",
   "figure.text.show-affected-parts": "mostrar piezas afectadas",
   "figure.button.to-floor": "al suelo",
   "figure.label.accepts": "acepta",
@@ -530,7 +525,6 @@
   "figure.label.fastened-to": "sujeta a",
   "figure.label.not-fastened": "sin sujetar",
   "figure.label.my-face": "mi cara",
-  "figure.label.target-part": "pieza de destino",
   "figure.label.target-face": "cara de destino",
   "figure.label.stands-on-plane": "apoyar en el plano de montaje",
   "figure.label.facing-meet": "caras en contacto",
@@ -560,6 +554,10 @@
   "figure.text.preview-face-unknown": "Esta cara no se puede mostrar en el lienzo.",
   "figure.text.target-would-loop": "{part}: unida a {mine}, no se puede elegir",
   "figure.label.fasten-detail": "Detalles",
+  "figure.label.fasten-what": "En qué pieza",
+  "figure.label.fasten-face-on-part": "En qué cara de {part}",
+  "figure.label.fasten-face-on-plane": "Dónde en el {plane}",
+  "figure.label.fasten-how": "Cómo se coloca",
   "figure.label.facing": "Cómo se unen las caras",
   "figure.text.fasten-summary-gap": "separación {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "separación calculada por una fórmula",
@@ -598,10 +596,8 @@
   "figure.label.room-undeclared": "aún no declarado",
   "figure.label.room-declared": "Declarado ahora",
   "figure.label.mounting-face": "Cara de montaje",
-  "figure.text.mounting-face-explained": "La cara sobre la que se monta la figura. Es una elección independiente del espacio que ocupa.",
-  "figure.button.set-mounting-face": "Esta cara",
   "figure.button.clear-mounting-face": "Borrar",
-  "figure.label.mounting-face-none": "ninguna",
+  "figure.text.mounting-face-unchecked-at-center": "no se comprueba en una figura centrada",
   "figure.label.dimensions": "Dimensiones",
   "figure.label.part-id": "id de pieza",
   "figure.text.part-id-is-stable": "El id de pieza es al que apuntan las sujeciones, los movimientos y las conexiones, por lo que no cambia.",
@@ -675,7 +671,6 @@
   "figure.label.group-figure-size": "Tamaño de la figura",
   "figure.label.group-part": "Pieza",
   "figure.label.group-figure": "Figura",
-  "figure.label.group-standing": "Dónde se apoya",
   "figure.label.group-catalog": "Catálogo",
   "figure.button.control-settings": "Nombre, rango y tiempo",
   "figure.label.align-x": "izquierda-derecha",
@@ -877,10 +872,8 @@
   "figure.button.show-model-settings": "Mostrar la configuración del modelo",
   "figure.text.new-figure-name": "Nueva figura",
   "figure.text.fasten-editing": "Editando la unión actual: su {face} en {target}",
-  "figure.text.fasten-new": "Unir de nuevo",
   "figure.text.fasten-start": "Una esta pieza a una cara de otra pieza para que mantengan su relación cuando cualquiera de ellas cambie.",
   "figure.button.fasten-start": "Unir a otra pieza",
-  "figure.label.target-part-placeholder": "Elija una pieza",
   "figure.text.fasten-target-first": "Elija primero la pieza a la que unirla.",
   "figure.text.fasten-edit-on-plane": "Esta pieza está conectada a la referencia de colocación del modelo. Sepárela antes de unirla a otra pieza.",
   "figure.button.align-to-floor": "apoyar en el suelo",

package/translations/ja.json

@@ -39,7 +39,6 @@
   "figure.button.save": "save",
   "figure.button.see-the-trend-chart": "see the trend chart",
   "figure.button.snap": "グリッドに合わせる",
-  "figure.label.declared-space": "空間宣言",
   "figure.label.follows-expression": "式で決まる",
   "figure.label.gizmo-rotate": "回転",
   "figure.label.gizmo-scale": "サイズ",
@@ -48,8 +47,6 @@
   "figure.label.position-in-proportion": "図形サイズに比例",
   "figure.label.primitive-rounded-box": "角丸ボックス",
   "figure.text.catalog-needs-a-save": "保存した後に設定できます。",
-  "figure.text.declared-space-declared": "部品から宣言しました。",
-  "figure.text.declared-space-none": "まだ宣言していません。",
   "figure.text.fasten-would-loop": "その部品はすでにこの部品に取り付けられているため、逆向きに取り付けられません。",
   "figure.text.follow-would-loop": "その寸法はすでにこの部品に追従しているため、互いに追従させられません。",
   "figure.text.links-need-a-box": "サイズ追従は箱形、取り付けは箱形と円柱の部品で使えます。",
@@ -90,11 +87,9 @@
   "figure.text.size-range-part-gone": "現在のサイズ {at} mm では {axis} 軸の部品の長さがすでに 0 です。リンクかサイズを変えてください。",
   "figure.text.input-range-size": "図形サイズ {axis} は {min} ～ {max} mm の間でのみ設定できます。入力値: {value} mm",
   "figure.text.input-range": "この値は {min} ～ {max} の間でのみ設定できます。入力値: {value}",
-  "figure.text.mounting-face-needs-space": "先に空間を宣言すると選べます。",
   "figure.text.part-is-referenced": "他の部品が '{part}' の値をそのまま使っているため削除できません。",
   "figure.text.part-name-invalid": "'{name}' は部品名に使えません。英字で始め、英字・数字・-・_ のみ使えます。",
   "figure.text.part-name-taken": "'{name}' はこの図形ですでに使われている名前です。",
-  "figure.text.placement-redeclares": "変更すると、今の部品で空間を宣言し直します。",
   "figure.text.show-affected-parts": "影響する部品を見る",
   "figure.button.to-floor": "to floor",
   "figure.label.accepts": "受け入れるもの",
@@ -530,7 +525,6 @@
   "figure.label.fastened-to": "fastened to",
   "figure.label.not-fastened": "not fastened",
   "figure.label.my-face": "my face",
-  "figure.label.target-part": "target part",
   "figure.label.target-face": "target face",
   "figure.label.stands-on-plane": "stand on the mounting plane",
   "figure.label.facing-meet": "faces meet",
@@ -560,6 +554,10 @@
   "figure.text.preview-face-unknown": "この面はキャンバスに表示できません。",
   "figure.text.target-would-loop": "{part} — {mine} に取り付いているため選べません",
   "figure.label.fasten-detail": "詳細",
+  "figure.label.fasten-what": "どの部品に",
+  "figure.label.fasten-face-on-part": "{part}のどの面に",
+  "figure.label.fasten-face-on-plane": "{plane}のどこに",
+  "figure.label.fasten-how": "どう置くか",
   "figure.label.facing": "接し方",
   "figure.text.fasten-summary-gap": "間隔 {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "間隔は式で決まる",
@@ -598,10 +596,8 @@
   "figure.label.room-undeclared": "not declared yet",
   "figure.label.room-declared": "現在の宣言",
   "figure.label.mounting-face": "Mounting face",
-  "figure.text.mounting-face-explained": "The face the figure is mounted on. A separate choice from the room it takes up.",
-  "figure.button.set-mounting-face": "This face",
   "figure.button.clear-mounting-face": "Clear",
-  "figure.label.mounting-face-none": "none",
+  "figure.text.mounting-face-unchecked-at-center": "中心配置のため検査しません",
   "figure.label.dimensions": "Dimensions",
   "figure.label.part-id": "part id",
   "figure.text.part-id-is-stable": "The part id is what fastenings, motions and connections point at, so it does not change.",
@@ -675,7 +671,6 @@
   "figure.label.group-figure-size": "図形のサイズ",
   "figure.label.group-part": "部品",
   "figure.label.group-figure": "図形",
-  "figure.label.group-standing": "置き方",
   "figure.label.group-catalog": "一覧情報",
   "figure.button.control-settings": "名前・範囲・時間",
   "figure.label.align-x": "左右の位置",
@@ -877,10 +872,8 @@
   "figure.button.show-model-settings": "モデル設定を表示",
   "figure.text.new-figure-name": "新しい Figure",
   "figure.text.fasten-editing": "現在の取り付けを編集: {face}を{target}に",
-  "figure.text.fasten-new": "新しく取り付ける",
   "figure.text.fasten-start": "別の部品の面に取り付けると、相手の部品が変わっても関係を保ちます。",
   "figure.button.fasten-start": "別の部品に取り付ける",
-  "figure.label.target-part-placeholder": "取り付ける部品を選択",
   "figure.text.fasten-target-first": "先に取り付ける部品を選んでください。",
   "figure.text.fasten-edit-on-plane": "この部品はモデルの設置基準に接続されています。別の部品に取り付ける前に外してください。",
   "figure.button.align-to-floor": "床に合わせる",

package/translations/ko.json

@@ -39,7 +39,6 @@
   "figure.button.save": "저장",
   "figure.button.see-the-trend-chart": "추이 그래프 보기",
   "figure.button.snap": "눈금에 정렬",
-  "figure.label.declared-space": "차지하는 공간",
   "figure.label.follows-expression": "식으로 정해짐",
   "figure.label.gizmo-rotate": "돌리기",
   "figure.label.gizmo-scale": "크기",
@@ -48,8 +47,6 @@
   "figure.label.position-in-proportion": "도형 크기에 비례",
   "figure.label.primitive-rounded-box": "둥근 상자",
   "figure.text.catalog-needs-a-save": "저장한 뒤에 정할 수 있습니다.",
-  "figure.text.declared-space-declared": "부품에 맞춤",
-  "figure.text.declared-space-none": "정하지 않음",
   "figure.text.fasten-would-loop": "그 부품은 이미 이 부품에 붙어 있어서 거꾸로 붙일 수 없습니다.",
   "figure.text.follow-would-loop": "그 치수는 이미 이 부품을 따르고 있어서 서로 따르게 할 수 없습니다.",
   "figure.text.links-need-a-box": "「크기 따르기」는 상자 모양 부품에서, 「붙이기」는 상자·원기둥 부품에서 사용할 수 있습니다.",
@@ -90,11 +87,9 @@
   "figure.text.size-range-part-gone": "지금 크기 {at} mm 에서 {axis} 축의 부품 길이가 이미 0 입니다. 연결이나 크기를 바꿔 주세요.",
   "figure.text.input-range-size": "도형 크기 {axis} 는 {min} ~ {max} mm 사이에서만 정할 수 있습니다. 넣은 값: {value} mm",
   "figure.text.input-range": "이 값은 {min} ~ {max} 사이에서만 정할 수 있습니다. 넣은 값: {value}",
-  "figure.text.mounting-face-needs-space": "공간을 먼저 선언해야 고를 수 있습니다.",
   "figure.text.part-is-referenced": "다른 부품이 '{part}' 의 값을 그대로 쓰고 있어 삭제할 수 없습니다.",
   "figure.text.part-name-invalid": "'{name}'은(는) 부품 이름으로 사용할 수 없습니다. 영문자로 시작하고 영문자·숫자·-·_만 포함해야 합니다.",
   "figure.text.part-name-taken": "'{name}' 은 이 도형에서 이미 쓰는 이름입니다.",
-  "figure.text.placement-redeclares": "바꾸면 지금 부품으로 공간을 다시 선언합니다.",
   "figure.text.show-affected-parts": "영향 받는 부품 보기",
   "figure.button.to-floor": "바닥에",
   "figure.label.accepts": "받는 것",
@@ -530,7 +525,6 @@
   "figure.label.fastened-to": "붙은 곳",
   "figure.label.not-fastened": "붙지 않음",
   "figure.label.my-face": "내 면",
-  "figure.label.target-part": "상대 부품",
   "figure.label.target-face": "상대 면",
   "figure.label.stands-on-plane": "장착 평면에 세우기",
   "figure.label.facing-meet": "맞닿게",
@@ -560,6 +554,10 @@
   "figure.text.preview-face-unknown": "이 면은 캔버스에 표시하지 못합니다.",
   "figure.text.target-would-loop": "{part} — {mine}에 붙어 있어 고를 수 없음",
   "figure.label.fasten-detail": "세부",
+  "figure.label.fasten-what": "어느 부품에",
+  "figure.label.fasten-face-on-part": "{part}의 어느 면에",
+  "figure.label.fasten-face-on-plane": "{plane}의 어디에",
+  "figure.label.fasten-how": "어떻게 놓을지",
   "figure.label.facing": "닿는 방식",
   "figure.text.fasten-summary-gap": "간격 {mm} mm",
   "figure.text.fasten-summary-gap-worked-out": "간격은 식으로 정해짐",
@@ -598,10 +596,8 @@
   "figure.label.room-undeclared": "정하지 않음",
   "figure.label.room-declared": "지금 선언",
   "figure.label.mounting-face": "장착면",
-  "figure.text.mounting-face-explained": "도형을 배치할 때 기준이 되는 장착면을 지정합니다. 점유 공간 설정과는 별개입니다.",
-  "figure.button.set-mounting-face": "이 면으로",
   "figure.button.clear-mounting-face": "지정 해제",
-  "figure.label.mounting-face-none": "지정 안 함",
+  "figure.text.mounting-face-unchecked-at-center": "중심 배치라 검사하지 않음",
   "figure.label.dimensions": "치수",
   "figure.label.part-id": "부품 id",
   "figure.text.part-id-is-stable": "부품 id 는 붙이기·움직임·연결이 가리키는 이름이라 바꾸지 않습니다.",
@@ -675,7 +671,6 @@
   "figure.label.group-figure-size": "크기",
   "figure.label.group-part": "부품",
   "figure.label.group-figure": "도형",
-  "figure.label.group-standing": "놓이는 자리",
   "figure.label.group-catalog": "목록 정보",
   "figure.button.control-settings": "이름 · 범위 · 시간",
   "figure.label.align-x": "좌우 자리",
@@ -877,10 +872,8 @@
   "figure.button.show-model-settings": "모델 설정 보기",
   "figure.text.new-figure-name": "새 Figure",
   "figure.text.fasten-editing": "현재 관계 수정 — {face} → {target}",
-  "figure.text.fasten-new": "새로 붙이기",
   "figure.text.fasten-start": "이 부품을 다른 부품의 면에 붙여 두면, 상대 부품의 크기나 위치가 바뀌어도 함께 움직입니다.",
   "figure.button.fasten-start": "다른 부품에 붙이기",
-  "figure.label.target-part-placeholder": "붙일 부품 선택",
   "figure.text.fasten-target-first": "먼저 붙일 부품을 선택해 주세요.",
   "figure.text.fasten-edit-on-plane": "이 부품은 현재 모델의 설치 기준면에 연결되어 있습니다. 다른 부품에 붙이려면 먼저 붙임을 푸세요.",
   "figure.button.align-to-floor": "바닥에 내려놓기",