@stadiamaps/ferrostar 0.44.0 → 0.45.0

package/ferrostar.d.ts

@@ -1,86 +1,110 @@
 /* tslint:disable */
 /* eslint-disable */
+/**
+ * JavaScript wrapper for `advance_location_simulation`.
+ */
+export function advanceLocationSimulation(state: any): any;
 /**
  * JavaScript wrapper for `location_simulation_from_coordinates`.
  */
 export function locationSimulationFromCoordinates(coordinates: any, resample_distance: number | null | undefined, bias: LocationBias): any;
+/**
+ * JavaScript wrapper for `location_simulation_from_polyline`.
+ */
+export function locationSimulationFromPolyline(polyline: string, precision: number, resample_distance: number | null | undefined, bias: LocationBias): any;
 /**
  * JavaScript wrapper for `location_simulation_from_route`.
  */
 export function locationSimulationFromRoute(route: any, resample_distance: number | null | undefined, bias: LocationBias): any;
 /**
- * JavaScript wrapper for `location_simulation_from_polyline`.
+ * The lane type blocked by the incident.
  */
-export function locationSimulationFromPolyline(polyline: string, precision: number, resample_distance: number | null | undefined, bias: LocationBias): any;
+export type BlockedLane = "left" | "left center" | "left turn lane" | "center" | "right" | "right center" | "right turn lane" | "hov";
+
 /**
- * JavaScript wrapper for `advance_location_simulation`.
+ * The location of the user that is navigating.
+ *
+ * In addition to coordinates, this includes estimated accuracy and course information,
+ * which can influence navigation logic and UI.
+ *
+ * NOTE: Heading is absent on purpose.
+ * Heading updates are not related to a change in the user\'s location.
  */
-export function advanceLocationSimulation(state: any): any;
+export interface UserLocation {
+    coordinates: GeographicCoordinate;
+    /**
+     * The estimated accuracy of the coordinate (in meters)
+     */
+    horizontalAccuracy: number;
+    courseOverGround: CourseOverGround | undefined;
+    timestamp: { secs_since_epoch: number; nanos_since_epoch: number };
+    speed: Speed | undefined;
+}
+
 /**
- * An instruction for visual display (usually as banners) at a specific point along a [`RouteStep`].
+ * A maneuver (such as a turn or merge) followed by travel of a certain distance until reaching
+ * the next step.
  */
-export interface VisualInstruction {
+export interface RouteStep {
     /**
-     * The primary instruction content.
-     *
-     * This is usually given more visual weight.
+     * The full route geometry for this step.
      */
-    primaryContent: VisualInstructionContent;
+    geometry: GeographicCoordinate[];
     /**
-     * Optional secondary instruction content.
+     * The distance, in meters, to travel along the route after the maneuver to reach the next step.
      */
-    secondaryContent: VisualInstructionContent | undefined;
+    distance: number;
     /**
-     * Optional sub-maneuver instruction content.
+     * The estimated duration, in seconds, that it will take to complete this step.
      */
-    subContent: VisualInstructionContent | undefined;
+    duration: number;
     /**
-     * How far (in meters) from the upcoming maneuver the instruction should start being displayed
+     * The name of the road being traveled on (useful for certain UI styles).
      */
-    triggerDistanceBeforeManeuver: number;
-}
-
-/**
- * The content of a visual instruction.
- */
-export interface VisualInstructionContent {
+    roadName: string | undefined;
     /**
-     * The text to display.
+     * A list of exits (name or number).
      */
-    text: string;
+    exits: string[];
     /**
-     * A standardized maneuver type (if any).
+     * A description of the maneuver (ex: \"Turn wright onto main street\").
+     *
+     * Note for UI implementers: the context this appears in (or doesn\'t)
+     * depends somewhat on your use case and routing engine.
+     * For example, this field is useful as a written instruction in Valhalla.
      */
-    maneuverType: ManeuverType | undefined;
+    instruction: string;
     /**
-     * A standardized maneuver modifier (if any).
+     * A list of instructions for visual display (usually as banners) at specific points along the step.
      */
-    maneuverModifier: ManeuverModifier | undefined;
+    visualInstructions: VisualInstruction[];
     /**
-     * If applicable, the number of degrees you need to go around the roundabout before exiting.
-     *
-     * For example, entering and exiting the roundabout in the same direction of travel
-     * (as if you had gone straight, apart from the detour)
-     * would be an exit angle of 180 degrees.
+     * A list of prompts to announce (via speech synthesis) at specific points along the step.
      */
-    roundaboutExitDegrees: number | undefined;
+    spokenInstructions: SpokenInstruction[];
     /**
-     * Detailed information about the lanes. This is typically only present in sub-maneuver instructions.
+     * A list of json encoded strings representing annotations between each coordinate along the step.
      */
-    laneInfo: LaneInfo[] | undefined;
+    annotations: string[] | undefined;
     /**
-     * The exit number (or similar identifier like \"8B\").
+     * A list of incidents that occur along the step.
      */
-    exitNumbers: string[];
+    incidents: Incident[];
 }
 
 /**
- * The content of a visual instruction.
+ * The direction in which the user/device is observed to be traveling.
  */
-export interface LaneInfo {
-    active: boolean;
-    directions: string[];
-    activeDirection: string | undefined;
+export interface CourseOverGround {
+    /**
+     * The direction in which the user\'s device is traveling, measured in clockwise degrees from
+     * true north (N = 0, E = 90, S = 180, W = 270).
+     */
+    degrees: number;
+    /**
+     * The accuracy of the course value, measured in degrees.
+     */
+    accuracy: number | undefined;
 }
 
 /**
@@ -169,41 +193,19 @@ export interface Incident {
 }
 
 /**
- * Details about congestion for an incident.
+ * The speed of the user from the location provider.
  */
-export interface Congestion {
+export interface Speed {
     /**
-     * The level of congestion caused by the incident.
-     *
-     * 0 = no congestion
-     *
-     * 100 = road closed
-     *
-     * Other values mean no congestion was calculated
+     * The user\'s speed in meters per second.
      */
     value: number;
+    /**
+     * The accuracy of the speed value, measured in meters per second.
+     */
+    accuracy: number | undefined;
 }
 
-/**
- * The lane type blocked by the incident.
- */
-export type BlockedLane = "left" | "left center" | "left turn lane" | "center" | "right" | "right center" | "right turn lane" | "hov";
-
-/**
- * The impact of the incident that has occurred.
- */
-export type Impact = "unknown" | "critical" | "major" | "minor" | "low";
-
-/**
- * The type of incident that has occurred.
- */
-export type IncidentType = "accident" | "congestion" | "construction" | "disabled_vehicle" | "lane_restriction" | "mass_transit" | "miscellaneous" | "other_news" | "planned_event" | "road_closure" | "road_hazard" | "weather";
-
-/**
- * Additional information to further specify a [`ManeuverType`].
- */
-export type ManeuverModifier = "uturn" | "sharp right" | "right" | "slight right" | "straight" | "slight left" | "left" | "sharp left";
-
 /**
  * The broad class of maneuver to perform.
  *
@@ -212,85 +214,60 @@ export type ManeuverModifier = "uturn" | "sharp right" | "right" | "slight right
 export type ManeuverType = "turn" | "new name" | "depart" | "arrive" | "merge" | "on ramp" | "off ramp" | "fork" | "end of road" | "continue" | "roundabout" | "rotary" | "roundabout turn" | "notification" | "exit roundabout" | "exit rotary";
 
 /**
- * An instruction that can be synthesized using a TTS engine to announce an upcoming maneuver.
- *
- * Note that these do not have any locale information attached.
+ * A geographic coordinate in WGS84.
  */
-export interface SpokenInstruction {
-    /**
-     * Plain-text instruction which can be synthesized with a TTS engine.
-     */
-    text: string;
-    /**
-     * Speech Synthesis Markup Language, which should be preferred by clients capable of understanding it.
-     */
-    ssml: string | undefined;
+export interface GeographicCoordinate {
     /**
-     * How far (in meters) from the upcoming maneuver the instruction should start being displayed
+     * The latitude (in degrees).
      */
-    triggerDistanceBeforeManeuver: number;
+    lat: number;
     /**
-     * A unique identifier for this instruction.
-     *
-     * This is provided so that platform-layer integrations can easily disambiguate between distinct utterances,
-     * which may have the same textual content.
-     * UUIDs conveniently fill this purpose.
-     *
-     * NOTE: While it is possible to deterministically create UUIDs, we do not do so at this time.
-     * This should be theoretically possible though if someone cares to write up a proposal and a PR.
+     * The Longitude (in degrees).
      */
-    utteranceId: string;
+    lng: number;
 }
 
 /**
- * A maneuver (such as a turn or merge) followed by travel of a certain distance until reaching
- * the next step.
+ * The type of incident that has occurred.
  */
-export interface RouteStep {
-    /**
-     * The full route geometry for this step.
-     */
-    geometry: GeographicCoordinate[];
-    /**
-     * The distance, in meters, to travel along the route after the maneuver to reach the next step.
-     */
-    distance: number;
-    /**
-     * The estimated duration, in seconds, that it will take to complete this step.
-     */
-    duration: number;
+export type IncidentType = "accident" | "congestion" | "construction" | "disabled_vehicle" | "lane_restriction" | "mass_transit" | "miscellaneous" | "other_news" | "planned_event" | "road_closure" | "road_hazard" | "weather";
+
+/**
+ * A geographic bounding box defined by its corners.
+ */
+export interface BoundingBox {
     /**
-     * The name of the road being traveled on (useful for certain UI styles).
+     * The southwest corner of the bounding box.
      */
-    roadName: string | undefined;
+    sw: GeographicCoordinate;
     /**
-     * A list of exits (name or number).
+     * The northeast corner of the bounding box.
      */
-    exits: string[];
+    ne: GeographicCoordinate;
+}
+
+/**
+ * An instruction for visual display (usually as banners) at a specific point along a [`RouteStep`].
+ */
+export interface VisualInstruction {
     /**
-     * A description of the maneuver (ex: \"Turn wright onto main street\").
+     * The primary instruction content.
      *
-     * Note for UI implementers: the context this appears in (or doesn\'t)
-     * depends somewhat on your use case and routing engine.
-     * For example, this field is useful as a written instruction in Valhalla.
-     */
-    instruction: string;
-    /**
-     * A list of instructions for visual display (usually as banners) at specific points along the step.
+     * This is usually given more visual weight.
      */
-    visualInstructions: VisualInstruction[];
+    primaryContent: VisualInstructionContent;
     /**
-     * A list of prompts to announce (via speech synthesis) at specific points along the step.
+     * Optional secondary instruction content.
      */
-    spokenInstructions: SpokenInstruction[];
+    secondaryContent: VisualInstructionContent | undefined;
     /**
-     * A list of json encoded strings representing annotations between each coordinate along the step.
+     * Optional sub-maneuver instruction content.
      */
-    annotations: string[] | undefined;
+    subContent: VisualInstructionContent | undefined;
     /**
-     * A list of incidents that occur along the step.
+     * How far (in meters) from the upcoming maneuver the instruction should start being displayed
      */
-    incidents: Incident[];
+    triggerDistanceBeforeManeuver: number;
 }
 
 /**
@@ -316,73 +293,76 @@ export interface Route {
 }
 
 /**
- * The location of the user that is navigating.
- *
- * In addition to coordinates, this includes estimated accuracy and course information,
- * which can influence navigation logic and UI.
- *
- * NOTE: Heading is absent on purpose.
- * Heading updates are not related to a change in the user\'s location.
+ * Additional information to further specify a [`ManeuverType`].
  */
-export interface UserLocation {
-    coordinates: GeographicCoordinate;
-    /**
-     * The estimated accuracy of the coordinate (in meters)
-     */
-    horizontalAccuracy: number;
-    courseOverGround: CourseOverGround | undefined;
-    timestamp: { secs_since_epoch: number; nanos_since_epoch: number };
-    speed: Speed | undefined;
+export type ManeuverModifier = "uturn" | "sharp right" | "right" | "slight right" | "straight" | "slight left" | "left" | "sharp left";
+
+/**
+ * The content of a visual instruction.
+ */
+export interface LaneInfo {
+    active: boolean;
+    directions: string[];
+    activeDirection: string | undefined;
 }
 
 /**
- * The speed of the user from the location provider.
+ * An instruction that can be synthesized using a TTS engine to announce an upcoming maneuver.
+ *
+ * Note that these do not have any locale information attached.
  */
-export interface Speed {
+export interface SpokenInstruction {
     /**
-     * The user\'s speed in meters per second.
+     * Plain-text instruction which can be synthesized with a TTS engine.
      */
-    value: number;
+    text: string;
     /**
-     * The accuracy of the speed value, measured in meters per second.
+     * Speech Synthesis Markup Language, which should be preferred by clients capable of understanding it.
      */
-    accuracy: number | undefined;
-}
-
-/**
- * The direction in which the user/device is observed to be traveling.
- */
-export interface CourseOverGround {
+    ssml: string | undefined;
     /**
-     * The direction in which the user\'s device is traveling, measured in clockwise degrees from
-     * true north (N = 0, E = 90, S = 180, W = 270).
+     * How far (in meters) from the upcoming maneuver the instruction should start being spoken.
      */
-    degrees: number;
+    triggerDistanceBeforeManeuver: number;
     /**
-     * The accuracy of the course value, measured in degrees.
+     * A unique identifier for this instruction.
+     *
+     * This is provided so that platform-layer integrations can easily disambiguate between distinct utterances,
+     * which may have the same textual content.
+     * UUIDs conveniently fill this purpose.
+     *
+     * NOTE: While it is possible to deterministically create UUIDs, we do not do so at this time.
+     * This should be theoretically possible though if someone cares to write up a proposal and a PR.
      */
-    accuracy: number | undefined;
+    utteranceId: string;
 }
 
 /**
- * A geographic bounding box defined by its corners.
+ * Details about congestion for an incident.
  */
-export interface BoundingBox {
-    /**
-     * The southwest corner of the bounding box.
-     */
-    sw: GeographicCoordinate;
+export interface Congestion {
     /**
-     * The northeast corner of the bounding box.
+     * The level of congestion caused by the incident.
+     *
+     * 0 = no congestion
+     *
+     * 100 = road closed
+     *
+     * Other values mean no congestion was calculated
      */
-    ne: GeographicCoordinate;
+    value: number;
 }
 
 /**
- * Describes characteristics of the waypoint for the routing backend.
+ * Describes characteristics of the waypoint for routing purposes.
  */
 export type WaypointKind = "Break" | "Via";
 
+/**
+ * The impact of the incident that has occurred.
+ */
+export type Impact = "unknown" | "critical" | "major" | "minor" | "low";
+
 /**
  * A waypoint along a route.
  *
@@ -403,7 +383,7 @@ export interface Waypoint {
      * Optional additional properties that will be passed on to the [`crate::routing_adapters::RouteRequestGenerator`].
      *
      * Most users should prefer convenience functions like [`Waypoint::new_with_valhalla_properties`]
-     * (or, on platforms like iOS and Android with UniFFI bindings, [`crate::routing_adapters::valhalla::create_waypoint_with_valhalla_properties`]).
+     * (or, on platforms like iOS and Android with `UniFFI` bindings, [`crate::routing_adapters::valhalla::create_waypoint_with_valhalla_properties`]).
      *
      * # Format guidelines
      *
@@ -424,80 +404,105 @@ export interface Waypoint {
 }
 
 /**
- * A geographic coordinate in WGS84.
+ * The content of a visual instruction.
  */
-export interface GeographicCoordinate {
-    /**
-     * The latitude (in degrees).
-     */
-    lat: number;
+export interface VisualInstructionContent {
     /**
-     * The Longitude (in degrees).
+     * The text to display.
      */
-    lng: number;
-}
-
-/**
- * A set of optional filters to exclude candidate edges based on their attributes.
- */
-export interface ValhallaLocationSearchFilter {
+    text: string;
     /**
-     * Whether to exclude roads marked as tunnels.
+     * A standardized maneuver type (if any).
      */
-    exclude_tunnel?: boolean;
+    maneuverType: ManeuverType | undefined;
     /**
-     * Whether to exclude roads marked as bridges.
+     * A standardized maneuver modifier (if any).
      */
-    exclude_bridge?: boolean;
+    maneuverModifier: ManeuverModifier | undefined;
     /**
-     * Whether to exclude roads with tolls.
+     * If applicable, the number of degrees you need to go around the roundabout before exiting.
+     *
+     * For example, entering and exiting the roundabout in the same direction of travel
+     * (as if you had gone straight, apart from the detour)
+     * would be an exit angle of 180 degrees.
      */
-    exclude_tolls?: boolean;
+    roundaboutExitDegrees: number | undefined;
     /**
-     * Whether to exclude ferries.
+     * Detailed information about the lanes. This is typically only present in sub-maneuver instructions.
      */
-    exclude_ferry?: boolean;
+    laneInfo: LaneInfo[] | undefined;
     /**
-     * Whether to exclude roads marked as ramps.
+     * The exit number (or similar identifier like \"8B\").
      */
-    exclude_ramp?: boolean;
+    exitNumbers: string[];
+}
+
+/**
+ * Waypoint properties parsed from an OSRM-compatible server response.
+ *
+ * NOTE: Some servers (such as Valhalla) may support additional parameters at request time
+ * which are _not_ echoed back in the response time.
+ * This is unfortunate; PRs upstream would likely be welcomed!
+ * Similarly, if your server is OSRM-compatible and returns additional attributes,
+ * feel free to open a PR to include these as optional properties.
+ */
+export interface OsrmWaypointProperties {
     /**
-     * Whether to exclude roads marked as closed due to a live traffic closure.
+     * The name of the street that the waypoint snapped to.
      */
-    exclude_closures?: boolean;
+    name: string | undefined;
     /**
-     * The lowest road class allowed.
+     * The distance (in meters) between the snapped point and the input coordinate.
      */
-    min_road_class?: ValhallaRoadClass;
+    distance: number | undefined;
+}
+
+/**
+ * The event type.
+ *
+ * For full replayability, we record things like rerouting, and not just location updates.
+ */
+export type NavigationRecordingEventData = { StateUpdate: { trip_state: TripState; step_advance_condition: SerializableStepAdvanceCondition } } | { RouteUpdate: { route: Route } };
+
+/**
+ * An event that occurs during navigation.
+ *
+ * This is used for the optional session recording / telemetry.
+ */
+export interface NavigationRecordingEvent {
     /**
-     * The highest road class allowed.
+     * The timestamp of the event in milliseconds since Jan 1, 1970 UTC.
      */
-    max_road_class?: ValhallaRoadClass;
-    /**
-     * If specified, will only consider edges that are on or traverse the passed floor level.
-     * It will set `search_cutoff` to a default value of 300 meters if no cutoff value is passed.
-     * Additionally, if a `search_cutoff` is passed, it will be clamped to 1000 meters.
+    timestamp: number;
+    /**
+     * Data associated with the event.
      */
-    level?: number;
+    event_data: NavigationRecordingEventData;
 }
 
 /**
- * A road class in the Valhalla taxonomy.
- *
- * These are ordered from highest (fastest travel speed) to lowest.
+ * Configurations for built-in route providers.
  */
-export type ValhallaRoadClass = "motorway" | "trunk" | "primary" | "secondary" | "tertiary" | "unclassified" | "residential" | "service_other";
+export type WellKnownRouteProvider = { Valhalla: { endpointUrl: string; profile: string; optionsJson?: string | undefined } } | { GraphHopper: { endpointUrl: string; profile: string; locale: string; voiceUnits: GraphHopperVoiceUnits; optionsJson?: string | undefined } };
+
+export type SimulationError = { PolylineError: { error: string } } | "NotEnoughPoints";
 
 /**
- * Specifies a preferred side for departing from / arriving at a location.
- *
- * Examples:
- * - Germany drives on the right side of the road. A value of `same` will only allow leaving
- *   or arriving at a location such that it is on your right.
- * - Australia drives on the left side of the road. Passing a value of `same` will only allow
- *   leaving or arriving at a location such that it is on your left.
+ * Controls how simulated locations deviate from the actual route line.
+ * This simulates real-world GPS behavior where readings often have systematic bias.
  */
-export type ValhallaWaypointPreferredSide = "same" | "opposite" | "either";
+export type LocationBias = { Left: number } | { Right: number } | { Random: number } | "None";
+
+/**
+ * The current state of the simulation.
+ */
+export interface LocationSimulationState {
+    current_location: UserLocation;
+    remaining_locations: GeographicCoordinate[];
+    bias: LocationBias;
+}
+
+export type GraphHopperVoiceUnits = "metric" | "imperial";
 
 /**
  * Waypoint properties supported by Valhalla servers.
@@ -514,6 +519,10 @@ export type ValhallaWaypointPreferredSide = "same" | "opposite" | "either";
 export interface ValhallaWaypointProperties {
     /**
      * Preferred direction of travel for the start from the location.
+     *
+     * The heading is indicated in degrees from north in a clockwise direction, where north is 0°, east is 90°, south is 180°, and west is 270°.
+     * Avoid specifying this unless you really know what you\'re doing.
+     * Most use cases for this are better served by `preferred_side`.
      */
     heading: number | undefined;
     /**
@@ -532,6 +541,13 @@ export interface ValhallaWaypointProperties {
      * will be considered as candidates for said location.
      * If there are no candidates within this distance,
      * it will return the closest candidate within reason.
+     *
+     * This allows the routing engine to match another edge which is NOT
+     * the closest to your location, but in within this range.
+     * This can be useful if you have other constraints and want to disambiguate,
+     * but beware that this can lead to very strange results,
+     * particularly if you have specified other parameters like `heading`.
+     * This is an advanced feature and should only be used with extreme care.
      */
     radius: number | undefined;
     /**
@@ -587,114 +603,91 @@ export interface ValhallaWaypointProperties {
 }
 
 /**
- * Waypoint properties parsed from an OSRM-compatible server response.
+ * Specifies a preferred side for departing from / arriving at a location.
  *
- * NOTE: Some servers (such as Valhalla) may support additional parameters at request time
- * which are _not_ echoed back in the response time.
- * This is unfortunate; PRs upstream would likely be welcomed!
- * Similarly, if your server is OSRM-compatible and returns additional attributes,
- * feel free to open a PR to include these as optional properties.
+ * Examples:
+ * - Germany drives on the right side of the road. A value of `same` will only allow leaving
+ *   or arriving at a location such that it is on your right.
+ * - Australia drives on the left side of the road. Passing a value of `same` will only allow
+ *   leaving or arriving at a location such that it is on your left.
  */
-export interface OsrmWaypointProperties {
-    /**
-     * The name of the street that the waypoint snapped to.
-     */
-    name: string | undefined;
-    /**
-     * The distance (in meters) between the snapped point and the input coordinate.
-     */
-    distance: number | undefined;
-}
+export type ValhallaWaypointPreferredSide = "same" | "opposite" | "either";
 
 /**
- * The event type.
+ * A road class in the Valhalla taxonomy.
  *
- * For full replayability, we record things like rerouting, and not just location updates.
+ * These are ordered from highest (fastest travel speed) to lowest.
  */
-export type NavigationRecordingEventData = { StateUpdate: { trip_state: TripState; step_advance_condition: SerializableStepAdvanceCondition } } | { RouteUpdate: { route: Route } };
+export type ValhallaRoadClass = "motorway" | "trunk" | "primary" | "secondary" | "tertiary" | "unclassified" | "residential" | "service_other";
 
 /**
- * An event that occurs during navigation.
- *
- * This is used for the optional session recording / telemetry.
+ * A set of optional filters to exclude candidate edges based on their attributes.
  */
-export interface NavigationRecordingEvent {
+export interface ValhallaLocationSearchFilter {
     /**
-     * The timestamp of the event in milliseconds since Jan 1, 1970 UTC.
+     * Whether to exclude roads marked as tunnels.
      */
-    timestamp: number;
+    exclude_tunnel?: boolean;
     /**
-     * Data associated with the event.
+     * Whether to exclude roads marked as bridges.
      */
-    event_data: NavigationRecordingEventData;
-}
-
-export type SerializableStepAdvanceCondition = "Manual" | { DistanceToEndOfStep: { distance: number; minimumHorizontalAccuracy: number } } | { DistanceFromStep: { distance: number; minimumHorizontalAccuracy: number; calculateWhileOffRoute: boolean } } | { DistanceEntryExit: { distanceToEndOfStep: number; distanceAfterEndStep: number; minimumHorizontalAccuracy: number; hasReachedEndOfCurrentStep: boolean } } | { DistanceEntryAndSnappedExit: { distanceToEndOfStep: number; distanceAfterEndStep: number; minimumHorizontalAccuracy: number; hasReachedEndOfCurrentStep: boolean } } | { OrAdvanceConditions: { conditions: SerializableStepAdvanceCondition[] } } | { AndAdvanceConditions: { conditions: SerializableStepAdvanceCondition[] } };
-
-export interface SerializableNavigationControllerConfig {
+    exclude_bridge?: boolean;
     /**
-     * Configures when navigation advances to the next waypoint in the route.
+     * Whether to exclude roads with tolls.
      */
-    waypointAdvance: WaypointAdvanceMode;
+    exclude_tolls?: boolean;
     /**
-     * Configures when navigation advances to the next step in the route.
+     * Whether to exclude ferries.
      */
-    stepAdvanceCondition: SerializableStepAdvanceCondition;
+    exclude_ferry?: boolean;
     /**
-     * A special advance condition used for the final 2 route steps (last and arrival).
-     *
-     * This exists because several of our step advance conditions require entry and
-     * exit from a step\'s geometry. The end of the route/arrival doesn\'t always accommodate
-     * the expected location updates for the core step advance condition.
+     * Whether to exclude roads marked as ramps.
      */
-    arrivalStepAdvanceCondition: SerializableStepAdvanceCondition;
+    exclude_ramp?: boolean;
     /**
-     * Configures when the user is deemed to be off course.
-     *
-     * NOTE: This is distinct from the action that is taken.
-     * It is only the determination that the user has deviated from the expected route.
+     * Whether to exclude roads marked as closed due to a live traffic closure.
      */
-    routeDeviationTracking: RouteDeviationTracking;
+    exclude_closures?: boolean;
     /**
-     * Configures how the heading component of the snapped location is reported in [`TripState`].
+     * The lowest road class allowed.
      */
-    snappedLocationCourseFiltering: CourseFiltering;
+    min_road_class?: ValhallaRoadClass;
+    /**
+     * The highest road class allowed.
+     */
+    max_road_class?: ValhallaRoadClass;
+    /**
+     * If specified, will only consider edges that are on or traverse the passed floor level.
+     * It will set `search_cutoff` to a default value of 300 meters if no cutoff value is passed.
+     * Additionally, if a `search_cutoff` is passed, it will be clamped to 1000 meters.
+     */
+    level?: number;
 }
 
 /**
- * Controls when a waypoint should be marked as complete.
- *
- * While a route may consist of thousands of points, waypoints are special.
- * A simple trip will have only one waypoint: the final destination.
- * A more complex trip may have several intermediate stops.
- * Just as the navigation state keeps track of which steps remain in the route,
- * it also tracks which waypoints are still remaining.
- *
- * Tracking waypoints enables Ferrostar to reroute users when they stray off the route line.
- * The waypoint advance mode specifies how the framework decides
- * that a waypoint has been visited (and is removed from the list).
+ * Status information that describes whether the user is proceeding according to the route or not.
  *
- * NOTE: Advancing to the next *step* and advancing to the next *waypoint*
- * are separate processes.
- * This will not normally cause any issues, but keep in mind that
- * manually advancing to the next step does not *necessarily* imply
- * that the waypoint will be marked as complete!
+ * Note that the name is intentionally a bit generic to allow for expansion of other states.
+ * For example, we could conceivably add a \"wrong way\" status in the future.
  */
-export type WaypointAdvanceMode = { WaypointWithinRange: number } | { WaypointAlongAdvancingStep: number };
+export type RouteDeviation = "NoDeviation" | { OffRoute: { deviationFromRouteLine: number } };
 
 /**
- * Controls filtering/post-processing of user course by the [`NavigationController`].
+ * Determines if the user has deviated from the expected route.
  */
-export type CourseFiltering = "SnapToRoute" | "Raw";
+export type RouteDeviationTracking = "None" | { StaticThreshold: { minimumHorizontalAccuracy: number; maxAcceptableDeviation: number } };
+
+export type SerializableStepAdvanceCondition = "Manual" | { DistanceToEndOfStep: { distance: number; minimumHorizontalAccuracy: number } } | { DistanceFromStep: { distance: number; minimumHorizontalAccuracy: number; calculateWhileOffRoute: boolean } } | { DistanceEntryExit: { distanceToEndOfStep: number; distanceAfterEndStep: number; minimumHorizontalAccuracy: number; hasReachedEndOfCurrentStep: boolean } } | { DistanceEntryAndSnappedExit: { distanceToEndOfStep: number; distanceAfterEndStep: number; minimumHorizontalAccuracy: number; hasReachedEndOfCurrentStep: boolean } } | { OrAdvanceConditions: { conditions: SerializableStepAdvanceCondition[] } } | { AndAdvanceConditions: { conditions: SerializableStepAdvanceCondition[] } };
+
+export interface SerializableNavState {
+    tripState: TripState;
+    stepAdvanceCondition: SerializableStepAdvanceCondition;
+}
 
 /**
- * The state of a navigation session.
- *
- * This is produced by [`NavigationController`](super::NavigationController) methods
- * including [`get_initial_state`](super::NavigationController::get_initial_state)
- * and [`update_user_location`](super::NavigationController::update_user_location).
+ * Controls filtering/post-processing of user course by the [`NavigationController`].
  */
-export type TripState = { Idle: { user_location: UserLocation | undefined } } | { Navigating: { currentStepGeometryIndex: number | undefined; userLocation: UserLocation; snappedUserLocation: UserLocation; remainingSteps: RouteStep[]; remainingWaypoints: Waypoint[]; progress: TripProgress; summary: TripSummary; deviation: RouteDeviation; visualInstruction: VisualInstruction | undefined; spokenInstruction: SpokenInstruction | undefined; annotationJson: string | undefined } } | { Complete: { user_location: UserLocation; summary: TripSummary } };
+export type CourseFiltering = "SnapToRoute" | "Raw";
 
 /**
  * Information pertaining to the user\'s full navigation trip. This includes
@@ -739,39 +732,64 @@ export interface TripProgress {
     durationRemaining: number;
 }
 
-export interface SerializableNavState {
-    tripState: TripState;
-    stepAdvanceCondition: SerializableStepAdvanceCondition;
-}
-
 /**
- * Status information that describes whether the user is proceeding according to the route or not.
+ * Controls when a waypoint should be marked as complete.
  *
- * Note that the name is intentionally a bit generic to allow for expansion of other states.
- * For example, we could conceivably add a \"wrong way\" status in the future.
- */
-export type RouteDeviation = "NoDeviation" | { OffRoute: { deviationFromRouteLine: number } };
-
-/**
- * Determines if the user has deviated from the expected route.
+ * While a route may consist of thousands of points, waypoints are special.
+ * A simple trip will have only one waypoint: the final destination.
+ * A more complex trip may have several intermediate stops.
+ * Just as the navigation state keeps track of which steps remain in the route,
+ * it also tracks which waypoints are still remaining.
+ *
+ * Tracking waypoints enables Ferrostar to reroute users when they stray off the route line.
+ * The waypoint advance mode specifies how the framework decides
+ * that a waypoint has been visited (and is removed from the list).
+ *
+ * NOTE: Advancing to the next *step* and advancing to the next *waypoint*
+ * are separate processes.
+ * This will not normally cause any issues, but keep in mind that
+ * manually advancing to the next step does not *necessarily* imply
+ * that the waypoint will be marked as complete!
  */
-export type RouteDeviationTracking = "None" | { StaticThreshold: { minimumHorizontalAccuracy: number; maxAcceptableDeviation: number } };
-
-export type SimulationError = { PolylineError: { error: string } } | "NotEnoughPoints";
+export type WaypointAdvanceMode = { WaypointWithinRange: number } | { WaypointAlongAdvancingStep: number };
 
 /**
- * Controls how simulated locations deviate from the actual route line.
- * This simulates real-world GPS behavior where readings often have systematic bias.
+ * The state of a navigation session.
+ *
+ * This is produced by [`NavigationController`](super::NavigationController) methods
+ * including [`get_initial_state`](super::NavigationController::get_initial_state)
+ * and [`update_user_location`](super::NavigationController::update_user_location).
  */
-export type LocationBias = { Left: number } | { Right: number } | { Random: number } | "None";
+export type TripState = { Idle: { user_location: UserLocation | undefined } } | { Navigating: { currentStepGeometryIndex: number | undefined; userLocation: UserLocation; snappedUserLocation: UserLocation; remainingSteps: RouteStep[]; remainingWaypoints: Waypoint[]; progress: TripProgress; summary: TripSummary; deviation: RouteDeviation; visualInstruction: VisualInstruction | undefined; spokenInstruction: SpokenInstruction | undefined; annotationJson: string | undefined } } | { Complete: { user_location: UserLocation; summary: TripSummary } };
 
-/**
- * The current state of the simulation.
- */
-export interface LocationSimulationState {
-    current_location: UserLocation;
-    remaining_locations: GeographicCoordinate[];
-    bias: LocationBias;
+export interface SerializableNavigationControllerConfig {
+    /**
+     * Configures when navigation advances to the next waypoint in the route.
+     */
+    waypointAdvance: WaypointAdvanceMode;
+    /**
+     * Configures when navigation advances to the next step in the route.
+     */
+    stepAdvanceCondition: SerializableStepAdvanceCondition;
+    /**
+     * A special advance condition used for the final 2 route steps (last and arrival).
+     *
+     * This exists because several of our step advance conditions require entry and
+     * exit from a step\'s geometry. The end of the route/arrival doesn\'t always accommodate
+     * the expected location updates for the core step advance condition.
+     */
+    arrivalStepAdvanceCondition: SerializableStepAdvanceCondition;
+    /**
+     * Configures when the user is deemed to be off course.
+     *
+     * NOTE: This is distinct from the action that is taken.
+     * It is only the determination that the user has deviated from the expected route.
+     */
+    routeDeviationTracking: RouteDeviationTracking;
+    /**
+     * Configures how the heading component of the snapped location is reported in [`TripState`].
+     */
+    snappedLocationCourseFiltering: CourseFiltering;
 }
 
 /**
@@ -781,10 +799,11 @@ export interface LocationSimulationState {
  */
 export class NavigationController {
   free(): void;
-  constructor(route: any, config: any, should_record: any);
+  [Symbol.dispose](): void;
   getInitialState(location: any): any;
   advanceToNextStep(state: any): any;
   updateUserLocation(location: any, state: any): any;
+  constructor(route: any, config: any, should_record: any);
 }
 /**
  * A WebAssembly-compatible wrapper for `NavigationReplay` that exposes its functionality as a JavaScript object.
@@ -794,47 +813,51 @@ export class NavigationController {
  */
 export class NavigationReplay {
   free(): void;
-  constructor(json: any);
-  getEventByIndex(current_index: any): any;
+  [Symbol.dispose](): void;
   getAllEvents(): any;
+  getInitialRoute(): any;
+  getEventByIndex(current_index: any): any;
   getTotalDuration(): any;
   getInitialTimestamp(): any;
-  getInitialRoute(): any;
+  constructor(json: any);
 }
 /**
- * JavaScript wrapper for `NavigationSession` (simple version).
+ * JavaScript wrapper for [`NavigationSession`] (simple version).
  * This wrapper provides basic navigation functionality without observers.
  */
 export class NavigationSession {
   free(): void;
-  constructor(route: any, config: any);
+  [Symbol.dispose](): void;
   getInitialState(location: any): any;
   advanceToNextStep(state: any): any;
   updateUserLocation(location: any, state: any): any;
+  constructor(route: any, config: any);
 }
 /**
- * JavaScript wrapper for `NavigationSession` with recording capabilities.
+ * JavaScript wrapper for [`NavigationSession`] with recording capabilities.
  * This version includes a NavigationRecorder observer and provides direct access to recording functionality.
  */
 export class NavigationSessionRecording {
   free(): void;
-  constructor(route: any, config: any);
+  [Symbol.dispose](): void;
+  getEvents(): any;
+  getRecording(): any;
   getInitialState(location: any): any;
   advanceToNextStep(state: any): any;
   updateUserLocation(location: any, state: any): any;
-  getRecording(): any;
-  getEvents(): any;
+  constructor(route: any, config: any);
 }
 /**
  * JavaScript wrapper for `RouteAdapter`.
  */
 export class RouteAdapter {
   free(): void;
+  [Symbol.dispose](): void;
+  parseResponse(response: Uint8Array): any;
+  generateRequest(user_location: any, waypoints: any): any;
   /**
    * Creates a new RouteAdapter with a Valhalla HTTP request generator and an OSRM response parser.
    * At the moment, this is the only supported combination.
    */
-  constructor(endpoint_url: string, profile: string, costing_options_json?: string | null);
-  generateRequest(user_location: any, waypoints: any): any;
-  parseResponse(response: Uint8Array): any;
+  constructor(well_known_route_provider: WellKnownRouteProvider);
 }