@selesai/code 0.9.9 → 0.9.11

package/docs/terminal-setup.md

@@ -1,142 +1,142 @@
-# Terminal Setup
-
-Pi uses the [Kitty keyboard protocol](https://sw.kovidgoyal.net/kitty/keyboard-protocol/) for reliable modifier key detection. Most modern terminals support this protocol, but some require configuration.
-
-## Kitty, iTerm2
-
-Work out of the box.
-
-## Apple Terminal
-
-Pi enables enhanced key reporting when available. If Terminal.app still sends plain Return for `Shift+Enter`, pi uses a local macOS modifier fallback to treat that Return as `Shift+Enter`.
-
-This fallback only works when pi runs on the same Mac as Terminal.app. It cannot detect the local keyboard over remote SSH.
-
-## Ghostty
-
-Add to your Ghostty config (`~/Library/Application Support/com.mitchellh.ghostty/config` on macOS, `~/.config/ghostty/config` on Linux):
-
-```
-keybind = alt+backspace=text:\x1b\x7f
-```
-
-Older Claude Code versions may have added this Ghostty mapping:
-
-```
-keybind = shift+enter=text:\n
-```
-
-That mapping sends a raw linefeed byte. Inside pi, that is indistinguishable from `Ctrl+J`, so tmux and pi no longer see a real `shift+enter` key event.
-
-If Claude Code 2.x or newer is the only reason you added that mapping, you can remove it, unless you want to use Claude Code in tmux, where it still requires that Ghostty mapping.
-
-Pi binds `Ctrl+J` as a default newline alias, so `Shift+Enter` keeps working in tmux via that remap without extra pi configuration.
-
-## WezTerm
-
-WezTerm usually works out of the box for `Shift+Enter` via xterm modifyOtherKeys. To use the Kitty keyboard protocol explicitly, create `~/.wezterm.lua`:
-
-```lua
-local wezterm = require 'wezterm'
-local config = wezterm.config_builder()
-config.enable_kitty_keyboard = true
-return config
-```
-
-On macOS, WezTerm binds `Option+Enter` to fullscreen by default. To use `Option+Enter` for pi follow-up queueing, add this key override:
-
-```lua
-local wezterm = require 'wezterm'
-local config = wezterm.config_builder()
-config.keys = {
-  {
-    key = 'Enter',
-    mods = 'ALT',
-    action = wezterm.action.SendString('\x1b[13;3u'),
-  },
-}
-return config
-```
-
-If you already have a `config.keys` table, add the entry to it.
-
-On WSL, WezTerm may require a visible hardware cursor for IME candidate window positioning. If CJK IME candidates do not follow the text cursor, set `PI_HARDWARE_CURSOR=1` before running pi or set `showHardwareCursor` to `true` in settings.
-
-## Alacritty
-
-Alacritty usually works out of the box for `Shift+Enter`. On macOS, `Option+Enter` may arrive as plain `Enter`. To use `Option+Enter` for pi follow-up queueing, add to `~/.config/alacritty/alacritty.toml`:
-
-```toml
-[[keyboard.bindings]]
-key = "Enter"
-mods = "Alt"
-chars = "\u001b[13;3u"
-```
-
-Restart Alacritty after changing the config.
-
-## VS Code (Integrated Terminal)
-
-VS Code 1.109.5 and newer enable Kitty keyboard protocol in the integrated terminal by default, so `Shift+Enter` should work out of the box.
-
-VS Code versions older than 1.109.5 need an explicit terminal keybinding for `Shift+Enter`.
-
-`keybindings.json` locations:
-- macOS: `~/Library/Application Support/Code/User/keybindings.json`
-- Linux: `~/.config/Code/User/keybindings.json`
-- Windows: `%APPDATA%\\Code\\User\\keybindings.json`
-
-Add to `keybindings.json`:
-
-```json
-{
-  "key": "shift+enter",
-  "command": "workbench.action.terminal.sendSequence",
-  "args": { "text": "\u001b[13;2u" },
-  "when": "terminalFocus"
-}
-```
-
-## Windows Terminal
-
-Add to `settings.json` (Ctrl+Shift+, or Settings → Open JSON file) to forward the modified Enter keys pi uses:
-
-```json
-{
-  "actions": [
-    {
-      "command": { "action": "sendInput", "input": "\u001b[13;2u" },
-      "keys": "shift+enter"
-    },
-    {
-      "command": { "action": "sendInput", "input": "\u001b[13;3u" },
-      "keys": "alt+enter"
-    }
-  ]
-}
-```
-
-- `Shift+Enter` inserts a new line.
-- Windows Terminal binds `Alt+Enter` to fullscreen by default. That prevents pi from receiving `Alt+Enter` for follow-up queueing.
-- Remapping `Alt+Enter` to `sendInput` forwards the real key chord to pi instead.
-
-If you already have an `actions` array, add the objects to it. If the old fullscreen behavior persists, fully close and reopen Windows Terminal.
-
-## xfce4-terminal, terminator
-
-These terminals have limited escape sequence support. Modified Enter keys like `Ctrl+Enter` and `Shift+Enter` cannot be distinguished from plain `Enter`, preventing custom keybindings such as `submit: ["ctrl+enter"]` from working.
-
-For the best experience, use a terminal that supports the Kitty keyboard protocol:
-- [Kitty](https://sw.kovidgoyal.net/kitty/)
-- [Ghostty](https://ghostty.org/)
-- [WezTerm](https://wezfurlong.org/wezterm/)
-- [iTerm2](https://iterm2.com/)
-- [Alacritty](https://github.com/alacritty/alacritty) (requires compilation with Kitty protocol support)
-
-## IntelliJ IDEA (Integrated Terminal)
-
-The built-in terminal has limited escape sequence support. Shift+Enter cannot be distinguished from Enter in IntelliJ's terminal.
-
-If you want the hardware cursor visible, set `PI_HARDWARE_CURSOR=1` before running pi (disabled by default for compatibility).
-
-Consider using a dedicated terminal emulator for the best experience.
+# Terminal Setup
+
+Pi uses the [Kitty keyboard protocol](https://sw.kovidgoyal.net/kitty/keyboard-protocol/) for reliable modifier key detection. Most modern terminals support this protocol, but some require configuration.
+
+## Kitty, iTerm2
+
+Work out of the box.
+
+## Apple Terminal
+
+Pi enables enhanced key reporting when available. If Terminal.app still sends plain Return for `Shift+Enter`, pi uses a local macOS modifier fallback to treat that Return as `Shift+Enter`.
+
+This fallback only works when pi runs on the same Mac as Terminal.app. It cannot detect the local keyboard over remote SSH.
+
+## Ghostty
+
+Add to your Ghostty config (`~/Library/Application Support/com.mitchellh.ghostty/config` on macOS, `~/.config/ghostty/config` on Linux):
+
+```
+keybind = alt+backspace=text:\x1b\x7f
+```
+
+Older Claude Code versions may have added this Ghostty mapping:
+
+```
+keybind = shift+enter=text:\n
+```
+
+That mapping sends a raw linefeed byte. Inside pi, that is indistinguishable from `Ctrl+J`, so tmux and pi no longer see a real `shift+enter` key event.
+
+If Claude Code 2.x or newer is the only reason you added that mapping, you can remove it, unless you want to use Claude Code in tmux, where it still requires that Ghostty mapping.
+
+Pi binds `Ctrl+J` as a default newline alias, so `Shift+Enter` keeps working in tmux via that remap without extra pi configuration.
+
+## WezTerm
+
+WezTerm usually works out of the box for `Shift+Enter` via xterm modifyOtherKeys. To use the Kitty keyboard protocol explicitly, create `~/.wezterm.lua`:
+
+```lua
+local wezterm = require 'wezterm'
+local config = wezterm.config_builder()
+config.enable_kitty_keyboard = true
+return config
+```
+
+On macOS, WezTerm binds `Option+Enter` to fullscreen by default. To use `Option+Enter` for pi follow-up queueing, add this key override:
+
+```lua
+local wezterm = require 'wezterm'
+local config = wezterm.config_builder()
+config.keys = {
+  {
+    key = 'Enter',
+    mods = 'ALT',
+    action = wezterm.action.SendString('\x1b[13;3u'),
+  },
+}
+return config
+```
+
+If you already have a `config.keys` table, add the entry to it.
+
+On WSL, WezTerm may require a visible hardware cursor for IME candidate window positioning. If CJK IME candidates do not follow the text cursor, set `PI_HARDWARE_CURSOR=1` before running pi or set `showHardwareCursor` to `true` in settings.
+
+## Alacritty
+
+Alacritty usually works out of the box for `Shift+Enter`. On macOS, `Option+Enter` may arrive as plain `Enter`. To use `Option+Enter` for pi follow-up queueing, add to `~/.config/alacritty/alacritty.toml`:
+
+```toml
+[[keyboard.bindings]]
+key = "Enter"
+mods = "Alt"
+chars = "\u001b[13;3u"
+```
+
+Restart Alacritty after changing the config.
+
+## VS Code (Integrated Terminal)
+
+VS Code 1.109.5 and newer enable Kitty keyboard protocol in the integrated terminal by default, so `Shift+Enter` should work out of the box.
+
+VS Code versions older than 1.109.5 need an explicit terminal keybinding for `Shift+Enter`.
+
+`keybindings.json` locations:
+- macOS: `~/Library/Application Support/Code/User/keybindings.json`
+- Linux: `~/.config/Code/User/keybindings.json`
+- Windows: `%APPDATA%\\Code\\User\\keybindings.json`
+
+Add to `keybindings.json`:
+
+```json
+{
+  "key": "shift+enter",
+  "command": "workbench.action.terminal.sendSequence",
+  "args": { "text": "\u001b[13;2u" },
+  "when": "terminalFocus"
+}
+```
+
+## Windows Terminal
+
+Add to `settings.json` (Ctrl+Shift+, or Settings → Open JSON file) to forward the modified Enter keys pi uses:
+
+```json
+{
+  "actions": [
+    {
+      "command": { "action": "sendInput", "input": "\u001b[13;2u" },
+      "keys": "shift+enter"
+    },
+    {
+      "command": { "action": "sendInput", "input": "\u001b[13;3u" },
+      "keys": "alt+enter"
+    }
+  ]
+}
+```
+
+- `Shift+Enter` inserts a new line.
+- Windows Terminal binds `Alt+Enter` to fullscreen by default. That prevents pi from receiving `Alt+Enter` for follow-up queueing.
+- Remapping `Alt+Enter` to `sendInput` forwards the real key chord to pi instead.
+
+If you already have an `actions` array, add the objects to it. If the old fullscreen behavior persists, fully close and reopen Windows Terminal.
+
+## xfce4-terminal, terminator
+
+These terminals have limited escape sequence support. Modified Enter keys like `Ctrl+Enter` and `Shift+Enter` cannot be distinguished from plain `Enter`, preventing custom keybindings such as `submit: ["ctrl+enter"]` from working.
+
+For the best experience, use a terminal that supports the Kitty keyboard protocol:
+- [Kitty](https://sw.kovidgoyal.net/kitty/)
+- [Ghostty](https://ghostty.org/)
+- [WezTerm](https://wezfurlong.org/wezterm/)
+- [iTerm2](https://iterm2.com/)
+- [Alacritty](https://github.com/alacritty/alacritty) (requires compilation with Kitty protocol support)
+
+## IntelliJ IDEA (Integrated Terminal)
+
+The built-in terminal has limited escape sequence support. Shift+Enter cannot be distinguished from Enter in IntelliJ's terminal.
+
+If you want the hardware cursor visible, set `PI_HARDWARE_CURSOR=1` before running pi (disabled by default for compatibility).
+
+Consider using a dedicated terminal emulator for the best experience.

package/docs/termux.md

@@ -1,127 +1,127 @@
-# Termux (Android) Setup
-
-Pi runs on Android via [Termux](https://termux.dev/), a terminal emulator and Linux environment for Android.
-
-## Prerequisites
-
-1. Install [Termux](https://github.com/termux/termux-app#installation) from GitHub or F-Droid (not Google Play, that version is deprecated)
-2. Install [Termux:API](https://github.com/termux/termux-api#installation) from GitHub or F-Droid for clipboard and other device integrations
-
-## Installation
-
-```bash
-# Update packages
-pkg update && pkg upgrade
-
-# Install dependencies
-pkg install nodejs termux-api git
-
-# Install pi
-npm install -g --ignore-scripts @earendil-works/pi-coding-agent
-
-# Create config directory
-mkdir -p ~/.pi/agent
-
-# Run pi
-pi
-```
-
-## Clipboard Support
-
-Clipboard operations use `termux-clipboard-set` and `termux-clipboard-get` when running in Termux. The Termux:API app must be installed for these to work.
-
-Image clipboard is not supported on Termux (the `ctrl+v` image paste feature will not work).
-
-## Example AGENTS.md for Termux
-
-Create `~/.pi/agent/AGENTS.md` to help the agent understand the Termux environment:
-
-````markdown
-# Agent Environment: Termux on Android
-
-## Location
-- **OS**: Android (Termux terminal emulator)
-- **Home**: `/data/data/com.termux/files/home`
-- **Prefix**: `/data/data/com.termux/files/usr`
-- **Shared storage**: `/storage/emulated/0` (Downloads, Documents, etc.)
-
-## Opening URLs
-```bash
-termux-open-url "https://example.com"
-```
-
-## Opening Files
-```bash
-termux-open file.pdf          # Opens with default app
-termux-open --chooser image.jpg      # Choose app
-```
-
-## Clipboard
-```bash
-termux-clipboard-set "text"   # Copy
-termux-clipboard-get          # Paste
-```
-
-## Notifications
-```bash
-termux-notification -t "Title" -c "Content"
-```
-
-## Device Info
-```bash
-termux-battery-status         # Battery info
-termux-wifi-connectioninfo    # WiFi info
-termux-telephony-deviceinfo   # Device info
-```
-
-## Sharing
-```bash
-termux-share -a send file.txt # Share file
-```
-
-## Other Useful Commands
-```bash
-termux-toast "message"        # Quick toast popup
-termux-vibrate                # Vibrate device
-termux-tts-speak "hello"      # Text to speech
-termux-camera-photo out.jpg   # Take photo
-```
-
-## Notes
-- Termux:API app must be installed for `termux-*` commands
-- Use `pkg install termux-api` for the command-line tools
-- Storage permission needed for `/storage/emulated/0` access
-````
-
-## Limitations
-
-- **No image clipboard**: Termux clipboard API only supports text
-- **No native binaries**: Some optional native dependencies (like the clipboard module) are unavailable on Android ARM64 and are skipped during installation
-- **Storage access**: To access files in `/storage/emulated/0` (Downloads, etc.), run `termux-setup-storage` once to grant permissions
-
-## Troubleshooting
-
-### Clipboard not working
-
-Ensure both apps are installed:
-1. Termux (from GitHub or F-Droid)
-2. Termux:API (from GitHub or F-Droid)
-
-Then install the CLI tools:
-```bash
-pkg install termux-api
-```
-
-### Permission denied for shared storage
-
-Run once to grant storage permissions:
-```bash
-termux-setup-storage
-```
-
-### Node.js installation issues
-
-If npm fails, try clearing the cache:
-```bash
-npm cache clean --force
-```
+# Termux (Android) Setup
+
+Pi runs on Android via [Termux](https://termux.dev/), a terminal emulator and Linux environment for Android.
+
+## Prerequisites
+
+1. Install [Termux](https://github.com/termux/termux-app#installation) from GitHub or F-Droid (not Google Play, that version is deprecated)
+2. Install [Termux:API](https://github.com/termux/termux-api#installation) from GitHub or F-Droid for clipboard and other device integrations
+
+## Installation
+
+```bash
+# Update packages
+pkg update && pkg upgrade
+
+# Install dependencies
+pkg install nodejs termux-api git
+
+# Install pi
+npm install -g --ignore-scripts @earendil-works/pi-coding-agent
+
+# Create config directory
+mkdir -p ~/.pi/agent
+
+# Run pi
+pi
+```
+
+## Clipboard Support
+
+Clipboard operations use `termux-clipboard-set` and `termux-clipboard-get` when running in Termux. The Termux:API app must be installed for these to work.
+
+Image clipboard is not supported on Termux (the `ctrl+v` image paste feature will not work).
+
+## Example AGENTS.md for Termux
+
+Create `~/.pi/agent/AGENTS.md` to help the agent understand the Termux environment:
+
+````markdown
+# Agent Environment: Termux on Android
+
+## Location
+- **OS**: Android (Termux terminal emulator)
+- **Home**: `/data/data/com.termux/files/home`
+- **Prefix**: `/data/data/com.termux/files/usr`
+- **Shared storage**: `/storage/emulated/0` (Downloads, Documents, etc.)
+
+## Opening URLs
+```bash
+termux-open-url "https://example.com"
+```
+
+## Opening Files
+```bash
+termux-open file.pdf          # Opens with default app
+termux-open --chooser image.jpg      # Choose app
+```
+
+## Clipboard
+```bash
+termux-clipboard-set "text"   # Copy
+termux-clipboard-get          # Paste
+```
+
+## Notifications
+```bash
+termux-notification -t "Title" -c "Content"
+```
+
+## Device Info
+```bash
+termux-battery-status         # Battery info
+termux-wifi-connectioninfo    # WiFi info
+termux-telephony-deviceinfo   # Device info
+```
+
+## Sharing
+```bash
+termux-share -a send file.txt # Share file
+```
+
+## Other Useful Commands
+```bash
+termux-toast "message"        # Quick toast popup
+termux-vibrate                # Vibrate device
+termux-tts-speak "hello"      # Text to speech
+termux-camera-photo out.jpg   # Take photo
+```
+
+## Notes
+- Termux:API app must be installed for `termux-*` commands
+- Use `pkg install termux-api` for the command-line tools
+- Storage permission needed for `/storage/emulated/0` access
+````
+
+## Limitations
+
+- **No image clipboard**: Termux clipboard API only supports text
+- **No native binaries**: Some optional native dependencies (like the clipboard module) are unavailable on Android ARM64 and are skipped during installation
+- **Storage access**: To access files in `/storage/emulated/0` (Downloads, etc.), run `termux-setup-storage` once to grant permissions
+
+## Troubleshooting
+
+### Clipboard not working
+
+Ensure both apps are installed:
+1. Termux (from GitHub or F-Droid)
+2. Termux:API (from GitHub or F-Droid)
+
+Then install the CLI tools:
+```bash
+pkg install termux-api
+```
+
+### Permission denied for shared storage
+
+Run once to grant storage permissions:
+```bash
+termux-setup-storage
+```
+
+### Node.js installation issues
+
+If npm fails, try clearing the cache:
+```bash
+npm cache clean --force
+```