@scrypted/libav 1.0.181 → 1.0.182

package/openh264/autotest/performanceTest/ios/run_AutoTest_ios.sh

@@ -1,193 +0,0 @@
-#!/bin/bash
-
-##############################################################
-#Build ios test ref app
-
-#set the default configuration
-CODEC_TEST_IOS_ARCH="armv7 armv7s arm64"
-CODEC_TEST_IOS_PLATFORM="iphoneos"
-CODEC_TEST_IOS_DEBUG_RELEASE="Release"
-CODEC_TEST_IOS_REPORT_SUBFOLDER="release"
-
-
-buildXcodeProject()
-{
- xcodebuild ARCHS="${CODEC_TEST_IOS_ARCH}" VALID_ARCHS="${CODEC_TEST_IOS_ARCH}" ONLY_ACTIVE_ARCH=YES  -project $1 -target $2 -configuration $3 -sdk ${CODEC_TEST_IOS_PLATFORM} clean build
-
-if [ $? -eq 0 ]; then
- echo "build $1 $3 successfully"
- else
- echo "build $1 $3  fail"
- exit 1
- fi
-}
-
-
-
-iosPerformanceTest()
-{
-
-if [ $# -gt 2 ]; then
-echo "Please use command $0 [enc/dec] [release/debug]"
-exit 1
-fi
-
-for PARAM in $*; do
- if [ "enc" = "${PARAM}" ]; then
-     CODEC_TEST_XCODE_PROJECT_NAME="${AUTO_TEST_SRC_PATH}/codec/build/iOS/enc/encDemo/encDemo.xcodeproj"
-     CODEC_TEST_IOS_PROJECT_NAME="encDemo"
-     CODEC_TEST_IOS_PROJECT_PATH="${AUTO_TEST_SRC_PATH}/codec/build/iOS/enc/encDemo/build"
-     CODEC_TEST_IOS_APP=${CODEC_TEST_IOS_PROJECT_PATH}/${CODEC_TEST_IOS_DEBUG_RELEASE}-iphoneos/${CODEC_TEST_IOS_PROJECT_NAME}.app
-     CODEC_TEST_IOS_APP_ID="cisco.encDemo"
-     CODEC_TEST_RES=${AUTO_TEST_IOS_PATH}/../EncoderPerfTestRes
-     CODEC_TEST_LOG="encPerf"
- elif [ "dec" = "${PARAM}" ]; then
-     CODEC_TEST_XCODE_PROJECT_NAME="${AUTO_TEST_SRC_PATH}/codec/build/iOS/dec/demo/demo.xcodeproj/"
-     CODEC_TEST_IOS_PROJECT_NAME="demo"
-     CODEC_TEST_IOS_PROJECT_PATH="${AUTO_TEST_SRC_PATH}/codec/build/iOS/dec/demo/build"
-     CODEC_TEST_IOS_APP=${CODEC_TEST_IOS_PROJECT_PATH}/${CODEC_TEST_IOS_DEBUG_RELEASE}-iphoneos/${CODEC_TEST_IOS_PROJECT_NAME}.app
-     CODEC_TEST_IOS_APP_ID="hf.cisco.demo"
-     CODEC_TEST_RES=${AUTO_TEST_IOS_PATH}/../DecoderPerfTestRes
-     CODEC_TEST_LOG="decPerf"
- elif [ "release" = "${PARAM}" ]; then
-     CODEC_TEST_IOS_DEBUG_RELEASE="Release"
-     CODEC_TEST_IOS_REPORT_SUBFOLDER="release"
- elif [ "debug" = "${PARAM}" ]; then
-     CODEC_TEST_IOS_DEBUG_RELEASE="Debug"
-     CODEC_TEST_IOS_REPORT_SUBFOLDER="debug"
- else
-    echo parameters are illegal!!!, please have a check.
-    exit 1
- fi
- done
-
-echo "Codec test will run on ${CODEC_TEST_IOS_PLATFORM} with ${CODEC_TEST_IOS_DEBUG_RELEASE}"
-buildXcodeProject ${CODEC_TEST_XCODE_PROJECT_NAME} ${CODEC_TEST_IOS_PROJECT_NAME} ${CODEC_TEST_IOS_DEBUG_RELEASE} ${CODEC_TEST_IOS_PLATFORM}
-
-
-
-
-##############run on ios devices#########################
-# for real device
-if [ ! -d ${CODEC_TEST_IOS_APP} ] ; then
-echo "${CODEC_TEST_IOS_APP} is not found"
-exit 1
-else
-echo "Find app ${CODEC_TEST_IOS_APP}"
-fi
-
- #ensure instruments not runing
-echo "Try to kill the runing instruments"
-pids_str=`ps x -o pid,command | grep -v grep | grep "instruments" | awk '{printf "%s,", $1}'`
-instruments_pids="${pids_str//,/ }"
-for pid in ${instruments_pids}; do
-echo "Found instruments ${pid}. Killing..."
-kill -9 ${pid} && wait ${pid} &> /dev/null
-done
-
-
-
-DEVICES=`system_profiler SPUSBDataType | sed -n -e '/iPad/,/Serial/p' -e '/iPhone/,/Serial/p' | grep "Serial Number:" | awk -F ": " '{print $2}'`
-if [ "${DEVICES}#" == "#" ]
-then
-echo "Can not find any connected device! please check device is connected to MAC!"
-exit 1
-else
-rand=`date +%s`
-for DEVICE_ID in ${DEVICES}
-do
-echo "Try to run on device:${DEVICE_ID}"
-
-#Encoder YUV file too large
-if [ ${ENCDEC} = "enc" ]
-then
-#For limited devices space
-BAKRES=${CODEC_TEST_RES}_bak
-mv ${CODEC_TEST_RES} ${BAKRES}
-mkdir -p ${CODEC_TEST_RES}
-CODEC_CASE=`ls ${BAKRES}`
-echo ${CODEC_CASE}
-for CASE in ${CODEC_CASE}
-do
-echo ${CASE}
-cp -r ${BAKRES}/${CASE} ${CODEC_TEST_RES}/.
-
-
-#uninstall the application from device to remove the last result
-./fruitstrap uninstall --bundle ${CODEC_TEST_IOS_APP_ID} --id ${DEVICE_ID}
-if [ $? -ne 0 ]; then
-echo uninstall application: ${CODEC_TEST_IOS_APP} from device: ${DEVICE_ID} is failed!
-fi
-#install the application
-./fruitstrap install --bundle ${CODEC_TEST_IOS_APP} --id ${DEVICE_ID}
-if [ $? -ne 0 ]; then
-echo install application: ${CODEC_TEST_IOS_APP} to device: ${DEVICE_ID} is failed!
-exit 1
-fi
-
-./iFileTransfer -o copy -id ${DEVICE_ID} -app ${CODEC_TEST_IOS_APP_ID} -from ${CODEC_TEST_RES}
-instruments -w ${DEVICE_ID}  -t /Applications/Xcode.app/Contents/Applications/Instruments.app/Contents/PlugIns/AutomationInstrument.bundle/Contents/Resources/Automation.tracetemplate ${CODEC_TEST_IOS_APP} -e UIASCRIPT ./uiascript.js -e UIARRESULTPATH /tmp/
-#copy to report folder
-./iFileTransfer -o download -id ${DEVICE_ID} -app ${CODEC_TEST_IOS_APP_ID} -from /Documents/${CODEC_TEST_LOG}.log -to ${CODEC_TEST_IOS_REPORT_PATH}/${CODEC_TEST_LOG}_${DEVICE_ID}_${rand}_${CASE}.log
-if [ $? -ne 0 ]; then
-echo "download file: ${CODEC_TEST_LOG}.log from ${CODEC_TEST_IOS_APP_ID} is failed!"
-exit 1
-fi
-cat ${CODEC_TEST_IOS_REPORT_PATH}/${CODEC_TEST_LOG}_${DEVICE_ID}_${rand}_${CASE}.log>>${CODEC_TEST_IOS_REPORT_PATH}/${CODEC_TEST_LOG}_${DEVICE_ID}_${rand}.log
-rm -f ${CODEC_TEST_IOS_REPORT_PATH}/${CODEC_TEST_LOG}_${DEVICE_ID}_${rand}_${CASE}.log
-rm -rf ${CODEC_TEST_RES}/${CASE}
-done
-rm -rf ${CODEC_TEST_RES}
-mv ${BAKRES} ${CODEC_TEST_RES}
-#Enough spaces
-else
-#uninstall the application from device to remove the last result
-./fruitstrap uninstall --bundle ${CODEC_TEST_IOS_APP_ID} --id ${DEVICE_ID}
-if [ $? -ne 0 ]; then
-echo uninstall application: ${CODEC_TEST_IOS_APP} from device: ${DEVICE_ID} is failed!
-fi
-#install the application
-./fruitstrap install --bundle ${CODEC_TEST_IOS_APP} --id ${DEVICE_ID}
-if [ $? -ne 0 ]; then
-echo install application: ${CODEC_TEST_IOS_APP} to device: ${DEVICE_ID} is failed!
-exit 1
-fi
-
-./iFileTransfer -o copy -id ${DEVICE_ID} -app ${CODEC_TEST_IOS_APP_ID} -from ${CODEC_TEST_RES}
-instruments -w ${DEVICE_ID}  -t /Applications/Xcode.app/Contents/Applications/Instruments.app/Contents/PlugIns/AutomationInstrument.bundle/Contents/Resources/Automation.tracetemplate ${CODEC_TEST_IOS_APP} -e UIASCRIPT ./uiascript.js -e UIARRESULTPATH /tmp/
-#copy to report folder
-./iFileTransfer -o download -id ${DEVICE_ID} -app ${CODEC_TEST_IOS_APP_ID} -from /Documents/${CODEC_TEST_LOG}.log -to ${CODEC_TEST_IOS_REPORT_PATH}/${CODEC_TEST_LOG}_${DEVICE_ID}_${rand}_${CASE}.log
-if [ $? -ne 0 ]; then
-echo "download file: ${CODEC_TEST_LOG}.log from ${CODEC_TEST_IOS_APP_ID} is failed!"
-exit 1
-fi
-
-
-fi
-done
-
-fi
-}
-
-AUTO_TEST_IOS_PATH=`pwd`
-AUTO_TEST_SRC_PATH="../../.."
-CODEC_TEST_IOS_REPORT_PATH="${AUTO_TEST_IOS_PATH}/report"
-if [ ! -d ${CODEC_TEST_IOS_REPORT_PATH} ]
-then
- mkdir -p ${CODEC_TEST_IOS_REPORT_PATH}
-fi
-
-ENCDEC=$1
-#start to get encoder/decoder performance data,default run the xcode with release
-iosPerformanceTest $ENCDEC release
-
-if [ $? -ne 0 ]; then
-echo "Running $ENCDEC demo to get encoder performance is failed!"
-exit 1
-else
-echo Finished $ENCDEC performance test on ios devices
-echo the test result is generated at ./ios/report/xx.loGbash parsePerfData.sh
-echo xxxxxxxxxxxxxxxxxxxxxxxxxxxxIOS $ENCDEC  Endxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-fi
-#TODO:according to the trace of instruments to do some analysis
-#find ./ -name *.trace -exec rm -rf {} \;

package/openh264/autotest/performanceTest/ios/uiascript.js

@@ -1,19 +0,0 @@
-UIATarget.onAlert = function onAlert(alert){
-
-    UIALogger.logMessage("In Alert!");
-	title = alert.name();
-	if (title && title.indexOf("Microphone") !== -1) {
-		UIALogger.logMessage("Alert with title '" + title + "' encountered!");
-		var buttons = alert.buttons();
-		var buttonCount = buttons.length;
-
-		if (buttonCount > 0) {
-			var acceptButton = buttons[buttonCount - 1];
-			acceptButton.tap(); // last button is accept
-		}
-	return true; //forbid the default cancel processing
-    }
-    return false; //using the default cancel processing
-}
-var target = UIATarget.localTarget();
-target.delay(6000);

package/openh264/autotest/performanceTest/parsePerfData.sh

@@ -1,107 +0,0 @@
-#!/bin/bash
-
-#usage  runGetPerformanceInfo   ${PerformanceLogFile}
-runGetPerformanceInfo_openh264()
-{
-
-        if [ ! $# -eq 2 ]
-        then
-                echo "not enough parameters!"
-                echo "usage: ${0} [android/ios] ${PerformanceLogFile}"
-                return 1
-        fi
-
-        local PerformanceLogFile=$2
-    local FileName=""
-        local Width=""
-        local Height=""
-        local Frames=""
-        local FPS=""
-        local EncodeTime=""
-    if [ $1 = "android" ]
-    then seperatorNum=3
-    else
-        seperatorNum=2
-    fi
-
-        while read line
-        do
-                if [[ $line =~ "enc yuv file"  ]]
-                then
-            FileName=`echo $line | awk 'BEGIN {FS="enc yuv file"} {print $2}'`
-            FileName=`echo $FileName | awk 'BEGIN {FS=":"} {print $2}'`
-        fi
-        if [[ $line =~ "Width" ]]
-        then
-            Width=`echo $line | awk 'BEGIN {FS=":"} {print $'${seperatorNum}'}'`
-        fi
-        if [[ $line =~ "Height" ]]
-        then
-            Height=`echo $line | awk 'BEGIN {FS=":"} {print $'${seperatorNum}'}'`
-        fi
-        if [[ $line =~ "Frames" ]]
-        then
-            Frames=`echo $line | awk 'BEGIN {FS=":"} {print $'${seperatorNum}'}'`
-        fi
-        if [[ $line =~ "FPS" ]]
-        then
-            FPS=`echo $line | awk 'BEGIN {FS=":"} {print $'${seperatorNum}'}'`
-            FPS=`echo $FPS | awk 'BEGIN {FS="fps"} {print $1}'`
-        echo "${FileName},"${Width}x${Height}",${Frames},${FPS}"
-        fi
-
-        if [[  $line =~ "encode time"  ]]
-                then
-                        EncodeTime=`echo $line | awk 'BEGIN {FS=":"} {print $'${seperatorNum}'}'`
-                fi
-        if [[ $line =~ "height" ]]
-        then
-            Height=`echo $line | awk 'BEGIN {FS=":"} {print $'${seperatorNum}'}'`
-        fi
-        if [[ $line =~ "H264 source file name" ]]
-        then
-            FileName=`echo $line | awk 'BEGIN {FS=":"} {print $'${seperatorNum}'}'`
-       if [ $1 = "ios" ]
-       then
-            FileName=`echo $FileName | awk -F"DecoderPerfTestRes" '{print $2}'`
-            FileName=`echo $FileName | awk -F"/" '{print $2}'`
-       else
-            FileName=`echo $FileName | awk -F"/" '{print $4}'`
-       fi
-      fi
-
-        done <${PerformanceLogFile}
-
-
-}
-AUTO_TEST_RESULT_PATH="./TestResultCSV/"
-
-
-parseLogToCSV()
-{
-if [ $# -ne 1 ]
-then echo "Please input $0 [android/ios]"
-fi
-if [ $* = "android" ]
-then
-     Result_log_path="./android/report/"
-     suffix=android
-     dos2unix ${Result_log_path}*.*
-else
-Result_log_path="./ios/report/"
-suffix=ios
-fi
-Result_log=`ls ${Result_log_path}`
-
-for log in ${Result_log}
-do
-  PerformFile=`echo $log |awk -F"." '{print $1}'`
-  PerformFile=${PerformFile}_${suffix}.csv
- #inital perfermance file
- echo "$log,,,">>${AUTO_TEST_RESULT_PATH}${PerformFile}
- echo "YUV,Resolution,Encodedframes,FPS">>${AUTO_TEST_RESULT_PATH}${PerformFile}
-  runGetPerformanceInfo_openh264 ${suffix} ${Result_log_path}${log}>>${AUTO_TEST_RESULT_PATH}${PerformFile}
-done
-}
-parseLogToCSV android
-parseLogToCSV ios

package/openh264/autotest/performanceTest/run_perfTest.sh

@@ -1,122 +0,0 @@
-#!bin/bash
-IOS=1
-ANDROID=1
-ENC=1
-DEC=1
-AUTO_TEST_PATH=`pwd`
-
-#Judge to run the test on which kind of mobile
-if [ $# -eq 0 ];then
-echo Default testing will run on android and ios devices meanwhile
-else
-for params in $*; do
-if [ $params = "ios" ];then
-  echo Running the test just on ios devices
-  ANDROID=0
-elif [ $params = "android" ];then
-  echo Running the test just on android devices
-  IOS=0
-elif [ $params = "enc" ];then
-  echo Running the encoder performance test
-  DEC=0
-elif [ $params = "dec" ];then
-  echo Running the decoder performance test
-  ENC=0
-else
-  echo parameters are illegal!!!, ${0} [ios/android] [enc/dec]
-  exit 1
-fi
-done
-fi
-
-#Prepare encoder resources
-if [ ${ENC} = "1" ]
-then
-if [ ! -d ./EncoderPerTestRes ]
-then
-mkdir -p ./EncoderPerfTestRes
-fi
-if [ "#`ls ./EncoderPerfTestRes`" = "#" ]
-then
-echo put yuv and cfg file into ./EncoderPerfTest folder as
-echo case_720p
-echo case_720p/welsenc.cfg
-echo case_720p/layer2.cfg
-echo case_720p/yuv
-echo case_720p/yuv/xxx1.yuv
-echo case_720p/yuv/xxx2.yuv
-echo case_360p
-echo case_360p/welsenc.cfg
-echo ......
-else
-#Run the encoder performance test
-if [ ${IOS} = "1" ]
-then
-echo xxxxxxxxxxxxxxxxIOS ENC Startxxxxxxxxxxxxxxxxxx
-echo Run the Encoder performance test on ios devices
-cd ./ios
-bash run_AutoTest_ios.sh enc
-cd ${AUTO_TEST_PATH}
-fi
-
-if [ ${ANDROID} = "1" ]
-then
-echo xxxxxxxxxxxxxxAndroid ENC Startxxxxxxxxxxxxxxxxxxxx
-echo Run the Encoder performance test on android devices
-cd ./android
-bash run_AutoTest_android.sh enc
-cd ${AUTO_TEST_PATH}
-fi
-fi
-fi
-
-#Prepare decoder resources
-if [ ${DEC} = "1" ]
-then
-if [ ! -d ./DecoderPerfTestRes ]
-then
-mkdir -p ./DecoderPerfTestRes
-fi
-
-if [ "#`ls ./DecoderPerfTestRes`" = "#" ]
-then
-echo put decoded bitstreams into such folder as
-echo xxx1.264
-echo xxx2.264
-echo ........
-else
-#Run the decoder performance test
-if [ ${IOS} = "1" ]
-then
-echo xxxxxxxxxxxxxxxxIOS DEC Startxxxxxxxxxxxxxxxxxx
-echo Run the Decoder performance test on ios devices
-cd ./ios
-bash run_AutoTest_ios.sh dec
-cd ${AUTO_TEST_PATH}
-fi
-
-if [ ${ANDROID} = "1" ]
-then
-echo xxxxxxxxxxxxxxAndroid DEC Startxxxxxxxxxxxxxxxxxxxx
-echo Run the Decoder performance test on android devices
-cd ./android
-bash run_AutoTest_android.sh dec
-cd ${AUTO_TEST_PATH}
-fi
-fi
-fi
-
-#TODO:NOW just generate csv file to display performance data
-cd ${AUTO_TEST_PATH}
-if [[ "#`ls ./ios/report`" == "#" && "#`ls ./android/report`" == "#" ]]
-then
-echo There is nothing result log generated at ios or android devices
-else
-echo Start to generate test result csv file
-#Test result
-mkdir -p ./TestResultCSV
-bash parsePerfData.sh
-echo The csv file locate ./TestResultCSV/xxx.csv
-fi
-
-

package/openh264/autotest/unitTest/android/run_AutoTest_android.sh

@@ -1,112 +0,0 @@
-#!/bin/bash
-
-AUTO_TEST_ANDROID_PATH=`pwd`
-AUTO_TEST_SRC_PATH="../../../"
-AUTO_TEST_RES_PATH="${AUTO_TEST_ANDROID_PATH}/report"
-if [ ! -d ${AUTO_TEST_RES_PATH} ]
-then
-mkdir -p ${AUTO_TEST_RES_PATH}
-else
-echo "Will delete those outdate xml in the report"
-rm -f ${AUTO_TEST_RES_PATH}/*.xml
-fi
-#Prepare android build enviroment
-echo please set the enviroment variable as:
-echo export ANDROID_HOME="path of android sdk"
-echo export ANDROID_NDK_HOME="path of android ndk"
-ANDROID_SDK_PATH=${ANDROID_HOME}
-ANDROID_NDK_PATH=${ANDROID_NDK_HOME}
-ANDROID_MAKE_PARAMS="OS=android NDKROOT=${ANDROID_NDK_PATH} TARGET=android-19"
-
-if [ "#${ANDROID_SDK_PATH}" = "#" ]
-then
-echo Please set ANDROID_HOME with the path of Android SDK
-exit 1
-fi
-if [ "#${ANDROID_NDK_PATH}" = "#" ]
-then
-echo Please set ANDROID_NDK_HOME with the path of Android NDK
-exit 1
-fi
-#make build
-cd ${AUTO_TEST_SRC_PATH}
-find ./ -name *.o -exec rm -f {} \;
-find ./ -name *.d -exec rm -f {} \;
-make clean
-make $ANDROID_MAKE_PARAMS test
-
-if [ $? -ne 0 ]
-then
-   echo Build error,check with the trace of make
-   exit 1
-fi
-
-#find apk
-echo Start to find unittest apk
-apk_name=`find ./ -name MainActivity-debug.apk`
-if [ "#${apk_name}" = "#" ]
-then
-  echo Fail to find encoder APK.
-  exit 1
-fi
-
-#prepare devices
-ADB=${ANDROID_SDK_PATH}/platform-tools/adb
-
-#get devices
-devices=`$ADB devices | awk -F" " '/\tdevice/{print $1}'`
-if [ "#$devices" = "#" ];then
-   echo "Have not any android devices."
-   exit 1
-fi
-
-#run apk
-run_apk() {
-local apk=$1;
-local rand=` date +%s`
-apk_id="com.cisco.codec.unittest"
-apk_main="com.cisco.codec.unittest/.MainActivity"
-test_path="/sdcard/welsenc"
-log_grep_params="welsenc"
-test_res=./res
-xml_file="sdcard/codec_unittest.xml"
-for dev in $devices; do
-    #dev_info_file=${AUTO_TEST_RES_PATH}/${dev}.log
-    report_file=${AUTO_TEST_RES_PATH}/codec_unittest_${dev}_${rand}.xml
-    $ADB -s $dev uninstall ${apk_id}
-    $ADB -s $dev install -r ${apk}
-    #TODO: output more info about android device such as name,cpu,memory,and also power comsumption.
-    echo `$ADB -s $dev shell cat /system/build.prop |grep ro.product.model | awk -F"=" '{print $2}'`>${dev_info_file}
-    $ADB -s $dev push ${test_res} /sdcard/res
-    $ADB -s $dev shell am start --es path "$xml_file" -n ${apk_main}
-    # check whetehr the app is finished every 2 sec
-    for (( ; ; )); do
-        $ADB -s $dev shell ps | grep ${apk_id}
-        if [ $? -ne 0 ]; then
-            sleep 2
-            $ADB -s $dev shell ps | grep ${apk_id}
-            [ $? -ne 0 ] && break
-        fi
-        sleep 2
-    done
-
-    # kill logcat
-    $ADB -s $dev pull ${xml_file} ${report_file}
-    #delete the res
-    $ADB -s $dev shell rm -rf ${xml_file}
-    $ADB -s $dev shell rm -rf /sdcard/res
-done
-}
-for apk in ${apk_name};do
-   run_apk $apk;
-   if [ $? -ne 0 ]
-   then
-     echo There is something wrong happened when run ${apk_name}
-     exit 1
-   else
-     echo Finished unit test on android
-     echo The test result is at ./android/report/xxx.xml
-     echo xxxxxxxxxxxxxxxAndroid unittest Endxxxxxxxxxxxxxxxx
-   fi
-done
-