@scrypted/libav 1.0.170 → 1.0.171

package/opus/celt/_kiss_fft_guts.h

@@ -1,188 +0,0 @@
-/*Copyright (c) 2003-2004, Mark Borgerding
-
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-    * Redistributions of source code must retain the above copyright notice,
-       this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright notice,
-       this list of conditions and the following disclaimer in the
-       documentation and/or other materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-  POSSIBILITY OF SUCH DAMAGE.*/
-
-#ifndef KISS_FFT_GUTS_H
-#define KISS_FFT_GUTS_H
-
-#define MIN(a,b) ((a)<(b) ? (a):(b))
-#define MAX(a,b) ((a)>(b) ? (a):(b))
-
-/* kiss_fft.h
-   defines kiss_fft_scalar as either short or a float type
-   and defines
-   typedef struct { kiss_fft_scalar r; kiss_fft_scalar i; }kiss_fft_cpx; */
-#include "kiss_fft.h"
-
-/*
-  Explanation of macros dealing with complex math:
-
-   C_MUL(m,a,b)         : m = a*b
-   C_FIXDIV( c , div )  : if a fixed point impl., c /= div. noop otherwise
-   C_SUB( res, a,b)     : res = a - b
-   C_SUBFROM( res , a)  : res -= a
-   C_ADDTO( res , a)    : res += a
- * */
-#ifdef FIXED_POINT
-#include "arch.h"
-
-
-#define SAMP_MAX 2147483647
-#define TWID_MAX 32767
-#define TRIG_UPSCALE 1
-
-#define SAMP_MIN -SAMP_MAX
-
-#ifdef ENABLE_QEXT
-#   define S_MUL(a,b) MULT32_32_Q31(b, a)
-#   define S_MUL2(a,b) MULT32_32_Q31(b, a)
-#else
-#   define S_MUL(a,b) MULT16_32_Q15(b, a)
-#   define S_MUL2(a,b) MULT16_32_Q16(b, a)
-#endif
-
-#   define C_MUL(m,a,b) \
-      do{ (m).r = SUB32_ovflw(S_MUL((a).r,(b).r) , S_MUL((a).i,(b).i)); \
-          (m).i = ADD32_ovflw(S_MUL((a).r,(b).i) , S_MUL((a).i,(b).r)); }while(0)
-
-#   define C_MULC(m,a,b) \
-      do{ (m).r = ADD32_ovflw(S_MUL((a).r,(b).r) , S_MUL((a).i,(b).i)); \
-          (m).i = SUB32_ovflw(S_MUL((a).i,(b).r) , S_MUL((a).r,(b).i)); }while(0)
-
-#   define C_MULBYSCALAR( c, s ) \
-      do{ (c).r =  S_MUL( (c).r , s ) ;\
-          (c).i =  S_MUL( (c).i , s ) ; }while(0)
-
-#   define DIVSCALAR(x,k) \
-        (x) = S_MUL(  x, (TWID_MAX-((k)>>1))/(k)+1 )
-
-#   define C_FIXDIV(c,div) \
-        do {    DIVSCALAR( (c).r , div);  \
-                DIVSCALAR( (c).i  , div); }while (0)
-
-#define  C_ADD( res, a,b)\
-    do {(res).r=ADD32_ovflw((a).r,(b).r);  (res).i=ADD32_ovflw((a).i,(b).i); \
-    }while(0)
-#define  C_SUB( res, a,b)\
-    do {(res).r=SUB32_ovflw((a).r,(b).r);  (res).i=SUB32_ovflw((a).i,(b).i); \
-    }while(0)
-#define C_ADDTO( res , a)\
-    do {(res).r = ADD32_ovflw((res).r, (a).r);  (res).i = ADD32_ovflw((res).i,(a).i);\
-    }while(0)
-
-#define C_SUBFROM( res , a)\
-    do {(res).r = ADD32_ovflw((res).r,(a).r);  (res).i = SUB32_ovflw((res).i,(a).i); \
-    }while(0)
-
-#if defined(OPUS_ARM_INLINE_ASM)
-#include "arm/kiss_fft_armv4.h"
-#endif
-
-#if defined(OPUS_ARM_INLINE_EDSP)
-#include "arm/kiss_fft_armv5e.h"
-#endif
-#if defined(MIPSr1_ASM)
-#include "mips/kiss_fft_mipsr1.h"
-#endif
-
-#else  /* not FIXED_POINT*/
-
-#   define S_MUL(a,b) ( (a)*(b) )
-#   define S_MUL2(a,b) ( (a)*(b) )
-#define C_MUL(m,a,b) \
-    do{ (m).r = (a).r*(b).r - (a).i*(b).i;\
-        (m).i = (a).r*(b).i + (a).i*(b).r; }while(0)
-#define C_MULC(m,a,b) \
-    do{ (m).r = (a).r*(b).r + (a).i*(b).i;\
-        (m).i = (a).i*(b).r - (a).r*(b).i; }while(0)
-
-#define C_MUL4(m,a,b) C_MUL(m,a,b)
-
-#   define C_FIXDIV(c,div) /* NOOP */
-#   define C_MULBYSCALAR( c, s ) \
-    do{ (c).r *= (s);\
-        (c).i *= (s); }while(0)
-#endif
-
-#ifndef CHECK_OVERFLOW_OP
-#  define CHECK_OVERFLOW_OP(a,op,b) /* noop */
-#endif
-
-#ifndef C_ADD
-#define  C_ADD( res, a,b)\
-    do { \
-            CHECK_OVERFLOW_OP((a).r,+,(b).r)\
-            CHECK_OVERFLOW_OP((a).i,+,(b).i)\
-            (res).r=(a).r+(b).r;  (res).i=(a).i+(b).i; \
-    }while(0)
-#define  C_SUB( res, a,b)\
-    do { \
-            CHECK_OVERFLOW_OP((a).r,-,(b).r)\
-            CHECK_OVERFLOW_OP((a).i,-,(b).i)\
-            (res).r=(a).r-(b).r;  (res).i=(a).i-(b).i; \
-    }while(0)
-#define C_ADDTO( res , a)\
-    do { \
-            CHECK_OVERFLOW_OP((res).r,+,(a).r)\
-            CHECK_OVERFLOW_OP((res).i,+,(a).i)\
-            (res).r += (a).r;  (res).i += (a).i;\
-    }while(0)
-
-#define C_SUBFROM( res , a)\
-    do {\
-            CHECK_OVERFLOW_OP((res).r,-,(a).r)\
-            CHECK_OVERFLOW_OP((res).i,-,(a).i)\
-            (res).r -= (a).r;  (res).i -= (a).i; \
-    }while(0)
-#endif /* C_ADD defined */
-
-#ifdef FIXED_POINT
-/*#  define KISS_FFT_COS(phase)  TRIG_UPSCALE*floor(MIN(32767,MAX(-32767,.5+32768 * cos (phase))))
-#  define KISS_FFT_SIN(phase)  TRIG_UPSCALE*floor(MIN(32767,MAX(-32767,.5+32768 * sin (phase))))*/
-#  define KISS_FFT_COS(phase)  floor(.5+TWID_MAX*cos (phase))
-#  define KISS_FFT_SIN(phase)  floor(.5+TWID_MAX*sin (phase))
-#  define HALF_OF(x) ((x)>>1)
-#elif defined(USE_SIMD)
-#  define KISS_FFT_COS(phase) _mm_set1_ps( cos(phase) )
-#  define KISS_FFT_SIN(phase) _mm_set1_ps( sin(phase) )
-#  define HALF_OF(x) ((x)*_mm_set1_ps(.5f))
-#else
-#  define KISS_FFT_COS(phase) (kiss_fft_scalar) cos(phase)
-#  define KISS_FFT_SIN(phase) (kiss_fft_scalar) sin(phase)
-#  define HALF_OF(x) ((x)*.5f)
-#endif
-
-#define  kf_cexp(x,phase) \
-        do{ \
-                (x)->r = KISS_FFT_COS(phase);\
-                (x)->i = KISS_FFT_SIN(phase);\
-        }while(0)
-
-#define  kf_cexp2(x,phase) \
-   do{ \
-      (x)->r = TRIG_UPSCALE*celt_cos_norm((phase));\
-      (x)->i = TRIG_UPSCALE*celt_cos_norm((phase)-32768);\
-}while(0)
-
-#endif /* KISS_FFT_GUTS_H */

package/opus/celt/arch.h

@@ -1,390 +0,0 @@
-/* Copyright (c) 2003-2008 Jean-Marc Valin
-   Copyright (c) 2007-2008 CSIRO
-   Copyright (c) 2007-2009 Xiph.Org Foundation
-   Written by Jean-Marc Valin */
-/**
-   @file arch.h
-   @brief Various architecture definitions for CELT
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
-   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef ARCH_H
-#define ARCH_H
-
-#include "opus_types.h"
-#include "opus_defines.h"
-
-# if !defined(__GNUC_PREREQ)
-#  if defined(__GNUC__)&&defined(__GNUC_MINOR__)
-#   define __GNUC_PREREQ(_maj,_min) \
- ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min))
-#  else
-#   define __GNUC_PREREQ(_maj,_min) 0
-#  endif
-# endif
-
-#if OPUS_GNUC_PREREQ(3, 0)
-#define opus_likely(x)       (__builtin_expect(!!(x), 1))
-#define opus_unlikely(x)     (__builtin_expect(!!(x), 0))
-#else
-#define opus_likely(x)       (!!(x))
-#define opus_unlikely(x)     (!!(x))
-#endif
-
-#define CELT_SIG_SCALE 32768.f
-
-#define CELT_FATAL(str) celt_fatal(str, __FILE__, __LINE__)
-
-#if defined(ENABLE_ASSERTIONS) || defined(ENABLE_HARDENING)
-#ifdef __GNUC__
-__attribute__((noreturn))
-#endif
-void celt_fatal(const char *str, const char *file, int line);
-
-#if defined(CELT_C) && !defined(OVERRIDE_celt_fatal)
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef __GNUC__
-__attribute__((noreturn))
-#endif
-void celt_fatal(const char *str, const char *file, int line)
-{
-   fprintf (stderr, "Fatal (internal) error in %s, line %d: %s\n", file, line, str);
-#if defined(_MSC_VER)
-   _set_abort_behavior( 0, _WRITE_ABORT_MSG);
-#endif
-   abort();
-}
-#endif
-
-#define celt_assert(cond) {if (!(cond)) {CELT_FATAL("assertion failed: " #cond);}}
-#define celt_assert2(cond, message) {if (!(cond)) {CELT_FATAL("assertion failed: " #cond "\n" message);}}
-#define MUST_SUCCEED(call) celt_assert((call) == OPUS_OK)
-#else
-#define celt_assert(cond)
-#define celt_assert2(cond, message)
-#define MUST_SUCCEED(call) do {if((call) != OPUS_OK) {RESTORE_STACK; return OPUS_INTERNAL_ERROR;} } while (0)
-#endif
-
-#if defined(ENABLE_ASSERTIONS)
-#define celt_sig_assert(cond) {if (!(cond)) {CELT_FATAL("signal assertion failed: " #cond);}}
-#else
-#define celt_sig_assert(cond)
-#endif
-
-#define IMUL32(a,b) ((a)*(b))
-
-#define MIN16(a,b) ((a) < (b) ? (a) : (b))   /**< Minimum 16-bit value.   */
-#define MAX16(a,b) ((a) > (b) ? (a) : (b))   /**< Maximum 16-bit value.   */
-#define MIN32(a,b) ((a) < (b) ? (a) : (b))   /**< Minimum 32-bit value.   */
-#define MAX32(a,b) ((a) > (b) ? (a) : (b))   /**< Maximum 32-bit value.   */
-#define IMIN(a,b) ((a) < (b) ? (a) : (b))   /**< Minimum int value.   */
-#define IMAX(a,b) ((a) > (b) ? (a) : (b))   /**< Maximum int value.   */
-#define UADD32(a,b) ((a)+(b))
-#define USUB32(a,b) ((a)-(b))
-#define MAXG(a,b) MAX32(a, b)
-#define MING(a,b) MIN32(a, b)
-
-/* Throughout the code, we use the following scaling for signals:
-   FLOAT: used for float API, normalized to +/-1.
-   INT16: used for 16-bit API, normalized to +/- 32768
-   RES: internal Opus resolution, defined as +/-1. in float builds, or either 16-bit or 24-bit int for fixed-point builds
-   SIG: internal CELT resolution: defined as +/- 32768. in float builds, or Q27 in fixed-point builds (int16 shifted by 12)
-*/
-
-
-/* Set this if opus_int64 is a native type of the CPU. */
-/* Assume that all LP64 architectures have fast 64-bit types; also x86_64
-   (which can be ILP32 for x32) and Win64 (which is LLP64). */
-#if defined(__x86_64__) || defined(__LP64__) || defined(_WIN64)
-#define OPUS_FAST_INT64 1
-#else
-#define OPUS_FAST_INT64 0
-#endif
-
-#ifdef FIXED_POINT
-#define ARG_FIXED(arg) , arg
-#else
-#define ARG_FIXED(arg)
-#endif
-
-#define PRINT_MIPS(file)
-
-#ifdef FIXED_POINT
-
-typedef opus_int16 opus_val16;
-typedef opus_int32 opus_val32;
-typedef opus_int64 opus_val64;
-
-typedef opus_val32 celt_sig;
-typedef opus_val16 celt_norm;
-typedef opus_val32 celt_ener;
-typedef opus_val32 celt_glog;
-
-#ifdef ENABLE_RES24
-typedef opus_val32 opus_res;
-#define RES_SHIFT 8
-#define SIG2RES(a)      PSHR32(a, SIG_SHIFT-RES_SHIFT)
-#define RES2INT16(a)    SAT16(PSHR32(a, RES_SHIFT))
-#define RES2INT24(a)    (a)
-#define RES2FLOAT(a)    ((1.f/32768.f/256.)*(a))
-#define INT16TORES(a)   SHL32(EXTEND32(a), RES_SHIFT)
-#define INT24TORES(a)   (a)
-#define ADD_RES(a, b)   ADD32(a, b)
-#define FLOAT2RES(a)    float2int(32768.f*256.f*(a))
-#define RES2SIG(a)      SHL32((a), SIG_SHIFT-RES_SHIFT)
-#define MULT16_RES_Q15(a,b) MULT16_32_Q15(a,b)
-#define MAX_ENCODING_DEPTH 24
-#else
-typedef opus_val16 opus_res;
-#define RES_SHIFT 0
-#define SIG2RES(a)      SIG2WORD16(a)
-#define RES2INT16(a)    (a)
-#define RES2INT24(a)    SHL32(EXTEND32(a), 8)
-#define RES2FLOAT(a)    ((1.f/32768.f)*(a))
-#define INT16TORES(a)   (a)
-#define INT24TORES(a)   SAT16(PSHR32(a, 8))
-#define ADD_RES(a, b)   SAT16(ADD32((a), (b)));
-#define FLOAT2RES(a)    FLOAT2INT16(a)
-#define RES2SIG(a)      SHL32(EXTEND32(a), SIG_SHIFT)
-#define MULT16_RES_Q15(a,b) MULT16_16_Q15(a,b)
-#define MAX_ENCODING_DEPTH 16
-#endif
-
-#define RES2VAL16(a)    RES2INT16(a)
-#define FLOAT2SIG(a)    float2int(((opus_int32)32768<<SIG_SHIFT)*(a))
-#define INT16TOSIG(a)   SHL32(EXTEND32(a), SIG_SHIFT)
-#define INT24TOSIG(a)   SHL32(a, SIG_SHIFT-8)
-
-#ifdef ENABLE_QEXT
-typedef opus_val32 celt_coef;
-#define COEF_ONE Q31ONE
-#define MULT_COEF_32(a, b) MULT32_32_Q31(a,b)
-#define MAC_COEF_32_ARM(c, a, b) ADD32((c), MULT32_32_Q32(a,b))
-#define MULT_COEF(a, b) MULT32_32_Q31(a,b)
-#define MULT_COEF_TAPS(a, b) SHL32(MULT16_16(a,b), 1)
-#define COEF2VAL16(x) EXTRACT16(SHR32(x, 16))
-#else
-typedef opus_val16 celt_coef;
-#define COEF_ONE Q15ONE
-#define MULT_COEF_32(a, b) MULT16_32_Q15(a,b)
-#define MAC_COEF_32_ARM(a, b, c) MAC16_32_Q16(a,b,c)
-#define MULT_COEF(a, b) MULT16_16_Q15(a,b)
-#define MULT_COEF_TAPS(a, b) MULT16_16_P15(a,b)
-#define COEF2VAL16(x) (x)
-#endif
-
-#define celt_isnan(x) 0
-
-#define Q15ONE 32767
-#define Q31ONE 2147483647
-
-#define SIG_SHIFT 12
-/* Safe saturation value for 32-bit signals. We need to make sure that we can
-   add two sig values and that the first stages of the MDCT don't cause an overflow.
-   The most constraining is the ARM_ASM comb filter where we shift left by one
-   and then add two values. Because of that, we use 2^29-1. SIG_SAT must be large
-   enough to fit a full-scale high-freq tone through the prefilter and comb filter,
-   meaning 1.85*1.75*2^(15+SIG_SHIFT) =  434529895.
-   so the limit should be about 2^31*sqrt(.5). */
-#define SIG_SAT (536870911)
-
-#define NORM_SCALING 16384
-
-#define DB_SHIFT 24
-
-#define EPSILON 1
-#define VERY_SMALL 0
-#define VERY_LARGE16 ((opus_val16)32767)
-#define Q15_ONE ((opus_val16)32767)
-
-
-#define ABS16(x) ((x) < 0 ? (-(x)) : (x))
-#define ABS32(x) ((x) < 0 ? (-(x)) : (x))
-
-static OPUS_INLINE opus_int16 SAT16(opus_int32 x) {
-   return x > 32767 ? 32767 : x < -32768 ? -32768 : (opus_int16)x;
-}
-
-#ifdef FIXED_DEBUG
-#include "fixed_debug.h"
-#else
-
-#include "fixed_generic.h"
-
-#ifdef OPUS_ARM_PRESUME_AARCH64_NEON_INTR
-#include "arm/fixed_arm64.h"
-#elif defined (OPUS_ARM_INLINE_EDSP)
-#include "arm/fixed_armv5e.h"
-#elif defined (OPUS_ARM_INLINE_ASM)
-#include "arm/fixed_armv4.h"
-#elif defined (BFIN_ASM)
-#include "fixed_bfin.h"
-#elif defined (TI_C5X_ASM)
-#include "fixed_c5x.h"
-#elif defined (TI_C6X_ASM)
-#include "fixed_c6x.h"
-#endif
-
-#endif
-
-#else /* FIXED_POINT */
-
-typedef float opus_val16;
-typedef float opus_val32;
-typedef float opus_val64;
-
-typedef float celt_sig;
-typedef float celt_norm;
-typedef float celt_ener;
-typedef float celt_glog;
-
-typedef float opus_res;
-typedef float celt_coef;
-
-#ifdef FLOAT_APPROX
-/* This code should reliably detect NaN/inf even when -ffast-math is used.
-   Assumes IEEE 754 format. */
-static OPUS_INLINE int celt_isnan(float x)
-{
-   union {float f; opus_uint32 i;} in;
-   in.f = x;
-   return ((in.i>>23)&0xFF)==0xFF && (in.i&0x007FFFFF)!=0;
-}
-#else
-#ifdef __FAST_MATH__
-#error Cannot build libopus with -ffast-math unless FLOAT_APPROX is defined. This could result in crashes on extreme (e.g. NaN) input
-#endif
-#define celt_isnan(x) ((x)!=(x))
-#endif
-
-#define Q15ONE 1.0f
-#define Q31ONE 1.0f
-#define COEF_ONE 1.0f
-#define COEF2VAL16(x) (x)
-
-#define NORM_SCALING 1.f
-
-#define EPSILON 1e-15f
-#define VERY_SMALL 1e-30f
-#define VERY_LARGE16 1e15f
-#define Q15_ONE ((opus_val16)1.f)
-
-/* This appears to be the same speed as C99's fabsf() but it's more portable. */
-#define ABS16(x) ((float)fabs(x))
-#define ABS32(x) ((float)fabs(x))
-
-#define QCONST16(x,bits) (x)
-#define QCONST32(x,bits) (x)
-#define GCONST(x) (x)
-
-#define NEG16(x) (-(x))
-#define NEG32(x) (-(x))
-#define NEG32_ovflw(x) (-(x))
-#define EXTRACT16(x) (x)
-#define EXTEND32(x) (x)
-#define SHR16(a,shift) (a)
-#define SHL16(a,shift) (a)
-#define SHR32(a,shift) (a)
-#define SHL32(a,shift) (a)
-#define PSHR32(a,shift) (a)
-#define VSHR32(a,shift) (a)
-
-#define PSHR(a,shift)   (a)
-#define SHR(a,shift)    (a)
-#define SHL(a,shift)    (a)
-#define SATURATE(x,a)   (x)
-#define SATURATE16(x)   (x)
-
-#define ROUND16(a,shift)  (a)
-#define SROUND16(a,shift) (a)
-#define HALF16(x)       (.5f*(x))
-#define HALF32(x)       (.5f*(x))
-
-#define ADD16(a,b) ((a)+(b))
-#define SUB16(a,b) ((a)-(b))
-#define ADD32(a,b) ((a)+(b))
-#define SUB32(a,b) ((a)-(b))
-#define ADD32_ovflw(a,b) ((a)+(b))
-#define SUB32_ovflw(a,b) ((a)-(b))
-#define MULT16_16_16(a,b)     ((a)*(b))
-#define MULT16_16(a,b)     ((opus_val32)(a)*(opus_val32)(b))
-#define MAC16_16(c,a,b)     ((c)+(opus_val32)(a)*(opus_val32)(b))
-
-#define MULT16_32_Q15(a,b)     ((a)*(b))
-#define MULT16_32_Q16(a,b)     ((a)*(b))
-
-#define MULT32_32_Q31(a,b)     ((a)*(b))
-
-#define MAC16_32_Q15(c,a,b)     ((c)+(a)*(b))
-#define MAC16_32_Q16(c,a,b)     ((c)+(a)*(b))
-#define MAC_COEF_32_ARM(c,a,b)     ((c)+(a)*(b))
-
-#define MULT16_16_Q11_32(a,b)     ((a)*(b))
-#define MULT16_16_Q11(a,b)     ((a)*(b))
-#define MULT16_16_Q13(a,b)     ((a)*(b))
-#define MULT16_16_Q14(a,b)     ((a)*(b))
-#define MULT16_16_Q15(a,b)     ((a)*(b))
-#define MULT16_16_P15(a,b)     ((a)*(b))
-#define MULT16_16_P13(a,b)     ((a)*(b))
-#define MULT16_16_P14(a,b)     ((a)*(b))
-#define MULT16_32_P16(a,b)     ((a)*(b))
-
-#define MULT_COEF_32(a, b)      ((a)*(b))
-#define MULT_COEF(a, b)   ((a)*(b))
-#define MULT_COEF_TAPS(a, b)   ((a)*(b))
-
-#define DIV32_16(a,b)     (((opus_val32)(a))/(opus_val16)(b))
-#define DIV32(a,b)     (((opus_val32)(a))/(opus_val32)(b))
-
-#define SIG2RES(a)      ((1/CELT_SIG_SCALE)*(a))
-#define RES2INT16(a)    FLOAT2INT16(a)
-#define RES2INT24(a)    float2int(32768.f*256.f*(a))
-#define RES2FLOAT(a)    (a)
-#define INT16TORES(a)   ((a)*(1/CELT_SIG_SCALE))
-#define INT24TORES(a)   ((1.f/32768.f/256.)*(a))
-#define ADD_RES(a, b)   ADD32(a, b)
-#define FLOAT2RES(a)    (a)
-#define RES2SIG(a)      (CELT_SIG_SCALE*(a))
-#define MULT16_RES_Q15(a,b) MULT16_16_Q15(a,b)
-
-#define RES2VAL16(a)    (a)
-#define FLOAT2SIG(a)    ((a)*CELT_SIG_SCALE)
-#define INT16TOSIG(a)   ((float)(a))
-#define INT24TOSIG(a)   ((float)(a)*(1.f/256.f))
-#define MAX_ENCODING_DEPTH 24
-
-#endif /* !FIXED_POINT */
-
-#ifndef GLOBAL_STACK_SIZE
-#ifdef FIXED_POINT
-#define GLOBAL_STACK_SIZE 120000
-#else
-#define GLOBAL_STACK_SIZE 120000
-#endif
-#endif
-
-#endif /* ARCH_H */