@scrypted/libav 1.0.170 → 1.0.171

package/opus/include/opus_projection.h

@@ -1,643 +0,0 @@
-/* Copyright (c) 2017 Google Inc.
-   Written by Andrew Allen */
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
-   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/**
- * @file opus_projection.h
- * @brief Opus projection reference API
- */
-
-#ifndef OPUS_PROJECTION_H
-#define OPUS_PROJECTION_H
-
-#include "opus_multistream.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** @cond OPUS_INTERNAL_DOC */
-
-/** These are the actual encoder and decoder CTL ID numbers.
-  * They should not be used directly by applications.c
-  * In general, SETs should be even and GETs should be odd.*/
-/**@{*/
-#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST    6001
-#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST    6003
-#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST         6005
-/**@}*/
-
-
-/** @endcond */
-
-/** @defgroup opus_projection_ctls Projection specific encoder and decoder CTLs
-  *
-  * These are convenience macros that are specific to the
-  * opus_projection_encoder_ctl() and opus_projection_decoder_ctl()
-  * interface.
-  * The CTLs from @ref opus_genericctls, @ref opus_encoderctls,
-  * @ref opus_decoderctls, and @ref opus_multistream_ctls may be applied to a
-  * projection encoder or decoder as well.
-  */
-/**@{*/
-
-/** Gets the gain (in dB. S7.8-format) of the demixing matrix from the encoder.
-  * @param[out] x <tt>opus_int32 *</tt>: Returns the gain (in dB. S7.8-format)
-  *                                      of the demixing matrix.
-  * @hideinitializer
-  */
-#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST, __opus_check_int_ptr(x)
-
-
-/** Gets the size in bytes of the demixing matrix from the encoder.
-  * @param[out] x <tt>opus_int32 *</tt>: Returns the size in bytes of the
-  *                                      demixing matrix.
-  * @hideinitializer
-  */
-#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST, __opus_check_int_ptr(x)
-
-
-/** Copies the demixing matrix to the supplied pointer location.
-  * @param[out] x <tt>unsigned char *</tt>: Returns the demixing matrix to the
-  *                                         supplied pointer location.
-  * @param y <tt>opus_int32</tt>: The size in bytes of the reserved memory at the
-  *                              pointer location.
-  * @hideinitializer
-  */
-#define OPUS_PROJECTION_GET_DEMIXING_MATRIX(x,y) OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST, x, __opus_check_int(y)
-
-
-/**@}*/
-
-/** Opus projection encoder state.
- * This contains the complete state of a projection Opus encoder.
- * It is position independent and can be freely copied.
- * @see opus_projection_ambisonics_encoder_create
- */
-typedef struct OpusProjectionEncoder OpusProjectionEncoder;
-
-
-/** Opus projection decoder state.
-  * This contains the complete state of a projection Opus decoder.
-  * It is position independent and can be freely copied.
-  * @see opus_projection_decoder_create
-  * @see opus_projection_decoder_init
-  */
-typedef struct OpusProjectionDecoder OpusProjectionDecoder;
-
-
-/**\name Projection encoder functions */
-/**@{*/
-
-/** Gets the size of an OpusProjectionEncoder structure.
-  * @param channels <tt>int</tt>: The total number of input channels to encode.
-  *                               This must be no more than 255.
-  * @param mapping_family <tt>int</tt>: The mapping family to use for selecting
-  *                                     the appropriate projection.
-  * @returns The size in bytes on success, or a negative error code
-  *          (see @ref opus_errorcodes) on error.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_ambisonics_encoder_get_size(
-    int channels,
-    int mapping_family
-);
-
-
-/** Allocates and initializes a projection encoder state.
-  * Call opus_projection_encoder_destroy() to release
-  * this object when finished.
-  * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
-  *                                This must be one of 8000, 12000, 16000,
-  *                                24000, or 48000.
-  * @param channels <tt>int</tt>: Number of channels in the input signal.
-  *                               This must be at most 255.
-  *                               It may be greater than the number of
-  *                               coded channels (<code>streams +
-  *                               coupled_streams</code>).
-  * @param mapping_family <tt>int</tt>: The mapping family to use for selecting
-  *                                     the appropriate projection.
-  * @param[out] streams <tt>int *</tt>: The total number of streams that will
-  *                                     be encoded from the input.
-  * @param[out] coupled_streams <tt>int *</tt>: Number of coupled (2 channel)
-  *                                 streams that will be encoded from the input.
-  * @param application <tt>int</tt>: The target encoder application.
-  *                                  This must be one of the following:
-  * <dl>
-  * <dt>#OPUS_APPLICATION_VOIP</dt>
-  * <dd>Process signal for improved speech intelligibility.</dd>
-  * <dt>#OPUS_APPLICATION_AUDIO</dt>
-  * <dd>Favor faithfulness to the original input.</dd>
-  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
-  * <dd>Configure the minimum possible coding delay by disabling certain modes
-  * of operation.</dd>
-  * </dl>
-  * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
-  *                                   code (see @ref opus_errorcodes) on
-  *                                   failure.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionEncoder *opus_projection_ambisonics_encoder_create(
-    opus_int32 Fs,
-    int channels,
-    int mapping_family,
-    int *streams,
-    int *coupled_streams,
-    int application,
-    int *error
-) OPUS_ARG_NONNULL(4) OPUS_ARG_NONNULL(5);
-
-
-/** Initialize a previously allocated projection encoder state.
-  * The memory pointed to by \a st must be at least the size returned by
-  * opus_projection_ambisonics_encoder_get_size().
-  * This is intended for applications which use their own allocator instead of
-  * malloc.
-  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
-  * @see opus_projection_ambisonics_encoder_create
-  * @see opus_projection_ambisonics_encoder_get_size
-  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to initialize.
-  * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
-  *                                This must be one of 8000, 12000, 16000,
-  *                                24000, or 48000.
-  * @param channels <tt>int</tt>: Number of channels in the input signal.
-  *                               This must be at most 255.
-  *                               It may be greater than the number of
-  *                               coded channels (<code>streams +
-  *                               coupled_streams</code>).
-  * @param streams <tt>int</tt>: The total number of streams to encode from the
-  *                              input.
-  *                              This must be no more than the number of channels.
-  * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
-  *                                      to encode.
-  *                                      This must be no larger than the total
-  *                                      number of streams.
-  *                                      Additionally, The total number of
-  *                                      encoded channels (<code>streams +
-  *                                      coupled_streams</code>) must be no
-  *                                      more than the number of input channels.
-  * @param application <tt>int</tt>: The target encoder application.
-  *                                  This must be one of the following:
-  * <dl>
-  * <dt>#OPUS_APPLICATION_VOIP</dt>
-  * <dd>Process signal for improved speech intelligibility.</dd>
-  * <dt>#OPUS_APPLICATION_AUDIO</dt>
-  * <dd>Favor faithfulness to the original input.</dd>
-  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
-  * <dd>Configure the minimum possible coding delay by disabling certain modes
-  * of operation.</dd>
-  * </dl>
-  * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
-  *          on failure.
-  */
-OPUS_EXPORT int opus_projection_ambisonics_encoder_init(
-    OpusProjectionEncoder *st,
-    opus_int32 Fs,
-    int channels,
-    int mapping_family,
-    int *streams,
-    int *coupled_streams,
-    int application
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6);
-
-
-/** Encodes a projection Opus frame.
-  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state.
-  * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved
-  *                                            samples.
-  *                                            This must contain
-  *                                            <code>frame_size*channels</code>
-  *                                            samples.
-  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
-  *                                 signal.
-  *                                 This must be an Opus frame size for the
-  *                                 encoder's sampling rate.
-  *                                 For example, at 48 kHz the permitted values
-  *                                 are 120, 240, 480, 960, 1920, and 2880.
-  *                                 Passing in a duration of less than 10 ms
-  *                                 (480 samples at 48 kHz) will prevent the
-  *                                 encoder from using the LPC or hybrid modes.
-  * @param[out] data <tt>unsigned char*</tt>: Output payload.
-  *                                           This must contain storage for at
-  *                                           least \a max_data_bytes.
-  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
-  *                                                 memory for the output
-  *                                                 payload. This may be
-  *                                                 used to impose an upper limit on
-  *                                                 the instant bitrate, but should
-  *                                                 not be used as the only bitrate
-  *                                                 control. Use #OPUS_SET_BITRATE to
-  *                                                 control the bitrate.
-  * @returns The length of the encoded packet (in bytes) on success or a
-  *          negative error code (see @ref opus_errorcodes) on failure.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode(
-    OpusProjectionEncoder *st,
-    const opus_int16 *pcm,
-    int frame_size,
-    unsigned char *data,
-    opus_int32 max_data_bytes
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
-
-/** Encodes a projection Opus frame.
-  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state.
-  * @param[in] pcm <tt>const opus_int32*</tt>: The input signal as interleaved
-  *                                            samples representing (or slightly exceeding) 24-bit values.
-  *                                            This must contain
-  *                                            <code>frame_size*channels</code>
-  *                                            samples.
-  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
-  *                                 signal.
-  *                                 This must be an Opus frame size for the
-  *                                 encoder's sampling rate.
-  *                                 For example, at 48 kHz the permitted values
-  *                                 are 120, 240, 480, 960, 1920, and 2880.
-  *                                 Passing in a duration of less than 10 ms
-  *                                 (480 samples at 48 kHz) will prevent the
-  *                                 encoder from using the LPC or hybrid modes.
-  * @param[out] data <tt>unsigned char*</tt>: Output payload.
-  *                                           This must contain storage for at
-  *                                           least \a max_data_bytes.
-  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
-  *                                                 memory for the output
-  *                                                 payload. This may be
-  *                                                 used to impose an upper limit on
-  *                                                 the instant bitrate, but should
-  *                                                 not be used as the only bitrate
-  *                                                 control. Use #OPUS_SET_BITRATE to
-  *                                                 control the bitrate.
-  * @returns The length of the encoded packet (in bytes) on success or a
-  *          negative error code (see @ref opus_errorcodes) on failure.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode24(
-    OpusProjectionEncoder *st,
-    const opus_int32 *pcm,
-    int frame_size,
-    unsigned char *data,
-    opus_int32 max_data_bytes
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
-
-
-/** Encodes a projection Opus frame from floating point input.
-  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state.
-  * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved
-  *                                       samples with a normal range of
-  *                                       +/-1.0.
-  *                                       Samples with a range beyond +/-1.0
-  *                                       are supported but will be clipped by
-  *                                       decoders using the integer API and
-  *                                       should only be used if it is known
-  *                                       that the far end supports extended
-  *                                       dynamic range.
-  *                                       This must contain
-  *                                       <code>frame_size*channels</code>
-  *                                       samples.
-  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
-  *                                 signal.
-  *                                 This must be an Opus frame size for the
-  *                                 encoder's sampling rate.
-  *                                 For example, at 48 kHz the permitted values
-  *                                 are 120, 240, 480, 960, 1920, and 2880.
-  *                                 Passing in a duration of less than 10 ms
-  *                                 (480 samples at 48 kHz) will prevent the
-  *                                 encoder from using the LPC or hybrid modes.
-  * @param[out] data <tt>unsigned char*</tt>: Output payload.
-  *                                           This must contain storage for at
-  *                                           least \a max_data_bytes.
-  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
-  *                                                 memory for the output
-  *                                                 payload. This may be
-  *                                                 used to impose an upper limit on
-  *                                                 the instant bitrate, but should
-  *                                                 not be used as the only bitrate
-  *                                                 control. Use #OPUS_SET_BITRATE to
-  *                                                 control the bitrate.
-  * @returns The length of the encoded packet (in bytes) on success or a
-  *          negative error code (see @ref opus_errorcodes) on failure.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode_float(
-    OpusProjectionEncoder *st,
-    const float *pcm,
-    int frame_size,
-    unsigned char *data,
-    opus_int32 max_data_bytes
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
-
-
-/** Frees an <code>OpusProjectionEncoder</code> allocated by
-  * opus_projection_ambisonics_encoder_create().
-  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to be freed.
-  */
-OPUS_EXPORT void opus_projection_encoder_destroy(OpusProjectionEncoder *st);
-
-
-/** Perform a CTL function on a projection Opus encoder.
-  *
-  * Generally the request and subsequent arguments are generated by a
-  * convenience macro.
-  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state.
-  * @param request This and all remaining parameters should be replaced by one
-  *                of the convenience macros in @ref opus_genericctls,
-  *                @ref opus_encoderctls, @ref opus_multistream_ctls, or
-  *                @ref opus_projection_ctls
-  * @see opus_genericctls
-  * @see opus_encoderctls
-  * @see opus_multistream_ctls
-  * @see opus_projection_ctls
-  */
-OPUS_EXPORT int opus_projection_encoder_ctl(OpusProjectionEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
-
-
-/**@}*/
-
-/**\name Projection decoder functions */
-/**@{*/
-
-/** Gets the size of an <code>OpusProjectionDecoder</code> structure.
-  * @param channels <tt>int</tt>: The total number of output channels.
-  *                               This must be no more than 255.
-  * @param streams <tt>int</tt>: The total number of streams coded in the
-  *                              input.
-  *                              This must be no more than 255.
-  * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled
-  *                                      (2 channel) streams.
-  *                                      This must be no larger than the total
-  *                                      number of streams.
-  *                                      Additionally, The total number of
-  *                                      coded channels (<code>streams +
-  *                                      coupled_streams</code>) must be no
-  *                                      more than 255.
-  * @returns The size in bytes on success, or a negative error code
-  *          (see @ref opus_errorcodes) on error.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_decoder_get_size(
-    int channels,
-    int streams,
-    int coupled_streams
-);
-
-
-/** Allocates and initializes a projection decoder state.
-  * Call opus_projection_decoder_destroy() to release
-  * this object when finished.
-  * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
-  *                                This must be one of 8000, 12000, 16000,
-  *                                24000, or 48000.
-  * @param channels <tt>int</tt>: Number of channels to output.
-  *                               This must be at most 255.
-  *                               It may be different from the number of coded
-  *                               channels (<code>streams +
-  *                               coupled_streams</code>).
-  * @param streams <tt>int</tt>: The total number of streams coded in the
-  *                              input.
-  *                              This must be no more than 255.
-  * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
-  *                                      (2 channel) streams.
-  *                                      This must be no larger than the total
-  *                                      number of streams.
-  *                                      Additionally, The total number of
-  *                                      coded channels (<code>streams +
-  *                                      coupled_streams</code>) must be no
-  *                                      more than 255.
-  * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix
-  *                         that mapping from coded channels to output channels,
-  *                         as described in @ref opus_projection and
-  *                         @ref opus_projection_ctls.
-  * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the
-  *                                                  demixing matrix, as
-  *                                                  described in @ref
-  *                                                  opus_projection_ctls.
-  * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
-  *                                   code (see @ref opus_errorcodes) on
-  *                                   failure.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionDecoder *opus_projection_decoder_create(
-    opus_int32 Fs,
-    int channels,
-    int streams,
-    int coupled_streams,
-    unsigned char *demixing_matrix,
-    opus_int32 demixing_matrix_size,
-    int *error
-) OPUS_ARG_NONNULL(5);
-
-
-/** Initialize a previously allocated projection decoder state object.
-  * The memory pointed to by \a st must be at least the size returned by
-  * opus_projection_decoder_get_size().
-  * This is intended for applications which use their own allocator instead of
-  * malloc.
-  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
-  * @see opus_projection_decoder_create
-  * @see opus_projection_deocder_get_size
-  * @param st <tt>OpusProjectionDecoder*</tt>: Projection encoder state to initialize.
-  * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
-  *                                This must be one of 8000, 12000, 16000,
-  *                                24000, or 48000.
-  * @param channels <tt>int</tt>: Number of channels to output.
-  *                               This must be at most 255.
-  *                               It may be different from the number of coded
-  *                               channels (<code>streams +
-  *                               coupled_streams</code>).
-  * @param streams <tt>int</tt>: The total number of streams coded in the
-  *                              input.
-  *                              This must be no more than 255.
-  * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
-  *                                      (2 channel) streams.
-  *                                      This must be no larger than the total
-  *                                      number of streams.
-  *                                      Additionally, The total number of
-  *                                      coded channels (<code>streams +
-  *                                      coupled_streams</code>) must be no
-  *                                      more than 255.
-  * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix
-  *                         that mapping from coded channels to output channels,
-  *                         as described in @ref opus_projection and
-  *                         @ref opus_projection_ctls.
-  * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the
-  *                                                  demixing matrix, as
-  *                                                  described in @ref
-  *                                                  opus_projection_ctls.
-  * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
-  *          on failure.
-  */
-OPUS_EXPORT int opus_projection_decoder_init(
-    OpusProjectionDecoder *st,
-    opus_int32 Fs,
-    int channels,
-    int streams,
-    int coupled_streams,
-    unsigned char *demixing_matrix,
-    opus_int32 demixing_matrix_size
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
-
-
-/** Decode a projection Opus packet.
-  * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state.
-  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
-  *                                                Use a <code>NULL</code>
-  *                                                pointer to indicate packet
-  *                                                loss.
-  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
-  * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
-  *                                       samples.
-  *                                       This must contain room for
-  *                                       <code>frame_size*channels</code>
-  *                                       samples.
-  * @param frame_size <tt>int</tt>: The number of samples per channel of
-  *                                 available space in \a pcm.
-  *                                 If this is less than the maximum packet duration
-  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
-  *                                 of decoding some packets. In the case of PLC (data==NULL)
-  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
-  *                                 the duration of audio that is missing, otherwise the
-  *                                 decoder will not be in the optimal state to decode the
-  *                                 next incoming packet. For the PLC and FEC cases, frame_size
-  *                                 <b>must</b> be a multiple of 2.5 ms.
-  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
-  *                                 forward error correction data be decoded.
-  *                                 If no such data is available, the frame is
-  *                                 decoded as if it were lost.
-  * @returns Number of samples decoded on success or a negative error code
-  *          (see @ref opus_errorcodes) on failure.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode(
-    OpusProjectionDecoder *st,
-    const unsigned char *data,
-    opus_int32 len,
-    opus_int16 *pcm,
-    int frame_size,
-    int decode_fec
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-/** Decode a projection Opus packet.
-  * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state.
-  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
-  *                                                Use a <code>NULL</code>
-  *                                                pointer to indicate packet
-  *                                                loss.
-  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
-  * @param[out] pcm <tt>opus_int32*</tt>: Output signal, with interleaved
-  *                                       samples representing (or slightly exceeding) 24-bit values.
-  *                                       This must contain room for
-  *                                       <code>frame_size*channels</code>
-  *                                       samples.
-  * @param frame_size <tt>int</tt>: The number of samples per channel of
-  *                                 available space in \a pcm.
-  *                                 If this is less than the maximum packet duration
-  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
-  *                                 of decoding some packets. In the case of PLC (data==NULL)
-  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
-  *                                 the duration of audio that is missing, otherwise the
-  *                                 decoder will not be in the optimal state to decode the
-  *                                 next incoming packet. For the PLC and FEC cases, frame_size
-  *                                 <b>must</b> be a multiple of 2.5 ms.
-  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
-  *                                 forward error correction data be decoded.
-  *                                 If no such data is available, the frame is
-  *                                 decoded as if it were lost.
-  * @returns Number of samples decoded on success or a negative error code
-  *          (see @ref opus_errorcodes) on failure.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode24(
-    OpusProjectionDecoder *st,
-    const unsigned char *data,
-    opus_int32 len,
-    opus_int32 *pcm,
-    int frame_size,
-    int decode_fec
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-/** Decode a projection Opus packet with floating point output.
-  * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state.
-  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
-  *                                                Use a <code>NULL</code>
-  *                                                pointer to indicate packet
-  *                                                loss.
-  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
-  * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
-  *                                       samples.
-  *                                       This must contain room for
-  *                                       <code>frame_size*channels</code>
-  *                                       samples.
-  * @param frame_size <tt>int</tt>: The number of samples per channel of
-  *                                 available space in \a pcm.
-  *                                 If this is less than the maximum packet duration
-  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
-  *                                 of decoding some packets. In the case of PLC (data==NULL)
-  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
-  *                                 the duration of audio that is missing, otherwise the
-  *                                 decoder will not be in the optimal state to decode the
-  *                                 next incoming packet. For the PLC and FEC cases, frame_size
-  *                                 <b>must</b> be a multiple of 2.5 ms.
-  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
-  *                                 forward error correction data be decoded.
-  *                                 If no such data is available, the frame is
-  *                                 decoded as if it were lost.
-  * @returns Number of samples decoded on success or a negative error code
-  *          (see @ref opus_errorcodes) on failure.
-  */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode_float(
-    OpusProjectionDecoder *st,
-    const unsigned char *data,
-    opus_int32 len,
-    float *pcm,
-    int frame_size,
-    int decode_fec
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-
-/** Perform a CTL function on a projection Opus decoder.
-  *
-  * Generally the request and subsequent arguments are generated by a
-  * convenience macro.
-  * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state.
-  * @param request This and all remaining parameters should be replaced by one
-  *                of the convenience macros in @ref opus_genericctls,
-  *                @ref opus_decoderctls, @ref opus_multistream_ctls, or
-  *                @ref opus_projection_ctls.
-  * @see opus_genericctls
-  * @see opus_decoderctls
-  * @see opus_multistream_ctls
-  * @see opus_projection_ctls
-  */
-OPUS_EXPORT int opus_projection_decoder_ctl(OpusProjectionDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
-
-
-/** Frees an <code>OpusProjectionDecoder</code> allocated by
-  * opus_projection_decoder_create().
-  * @param st <tt>OpusProjectionDecoder</tt>: Projection decoder state to be freed.
-  */
-OPUS_EXPORT void opus_projection_decoder_destroy(OpusProjectionDecoder *st);
-
-
-/**@}*/
-
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* OPUS_PROJECTION_H */