@scrypted/libav 1.0.166 → 1.0.168

package/opus/celt/mdct.c

@@ -0,0 +1,372 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2008 Xiph.Org Foundation
+   Written by Jean-Marc Valin */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/* This is a simple MDCT implementation that uses a N/4 complex FFT
+   to do most of the work. It should be relatively straightforward to
+   plug in pretty much and FFT here.
+
+   This replaces the Vorbis FFT (and uses the exact same API), which
+   was a bit too messy and that was ending up duplicating code
+   (might as well use the same FFT everywhere).
+
+   The algorithm is similar to (and inspired from) Fabrice Bellard's
+   MDCT implementation in FFMPEG, but has differences in signs, ordering
+   and scaling in many places.
+*/
+
+#ifndef SKIP_CONFIG_H
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+#endif
+
+#include "mdct.h"
+#include "kiss_fft.h"
+#include "_kiss_fft_guts.h"
+#include <math.h>
+#include "os_support.h"
+#include "mathops.h"
+#include "stack_alloc.h"
+
+#if defined(MIPSr1_ASM)
+#include "mips/mdct_mipsr1.h"
+#endif
+
+#ifndef M_PI
+#define M_PI 3.141592653
+#endif
+
+#ifdef CUSTOM_MODES
+
+int clt_mdct_init(mdct_lookup *l,int N, int maxshift, int arch)
+{
+   int i;
+   kiss_twiddle_scalar *trig;
+   int shift;
+   int N2=N>>1;
+   l->n = N;
+   l->maxshift = maxshift;
+   for (i=0;i<=maxshift;i++)
+   {
+      if (i==0)
+         l->kfft[i] = opus_fft_alloc(N>>2>>i, 0, 0, arch);
+      else
+         l->kfft[i] = opus_fft_alloc_twiddles(N>>2>>i, 0, 0, l->kfft[0], arch);
+#ifndef ENABLE_TI_DSPLIB55
+      if (l->kfft[i]==NULL)
+         return 0;
+#endif
+   }
+   l->trig = trig = (kiss_twiddle_scalar*)opus_alloc((N-(N2>>maxshift))*sizeof(kiss_twiddle_scalar));
+   if (l->trig==NULL)
+     return 0;
+   for (shift=0;shift<=maxshift;shift++)
+   {
+      /* We have enough points that sine isn't necessary */
+#if defined(FIXED_POINT)
+#ifndef ENABLE_QEXT
+      for (i=0;i<N2;i++)
+         trig[i] = TRIG_UPSCALE*celt_cos_norm(DIV32(ADD32(SHL32(EXTEND32(i),17),N2+16384),N));
+#else
+      for (i=0;i<N2;i++)
+         trig[i] = (kiss_twiddle_scalar)MAX32(-2147483647,MIN32(2147483647,floor(.5+2147483648*cos(2*M_PI*(i+.125)/N))));
+#endif
+#else
+      for (i=0;i<N2;i++)
+         trig[i] = (kiss_twiddle_scalar)cos(2*PI*(i+.125)/N);
+#endif
+      trig += N2;
+      N2 >>= 1;
+      N >>= 1;
+   }
+   return 1;
+}
+
+void clt_mdct_clear(mdct_lookup *l, int arch)
+{
+   int i;
+   for (i=0;i<=l->maxshift;i++)
+      opus_fft_free(l->kfft[i], arch);
+   opus_free((kiss_twiddle_scalar*)l->trig);
+}
+
+#endif /* CUSTOM_MODES */
+
+/* Forward MDCT trashes the input array */
+#ifndef OVERRIDE_clt_mdct_forward
+void clt_mdct_forward_c(const mdct_lookup *l, kiss_fft_scalar *in, kiss_fft_scalar * OPUS_RESTRICT out,
+      const celt_coef *window, int overlap, int shift, int stride, int arch)
+{
+   int i;
+   int N, N2, N4;
+   VARDECL(kiss_fft_scalar, f);
+   VARDECL(kiss_fft_cpx, f2);
+   const kiss_fft_state *st = l->kfft[shift];
+   const kiss_twiddle_scalar *trig;
+   celt_coef scale;
+#ifdef FIXED_POINT
+   /* Allows us to scale with MULT16_32_Q16(), which is faster than
+      MULT16_32_Q15() on ARM. */
+   int scale_shift = st->scale_shift-1;
+   int headroom;
+#endif
+   SAVE_STACK;
+   (void)arch;
+   scale = st->scale;
+
+   N = l->n;
+   trig = l->trig;
+   for (i=0;i<shift;i++)
+   {
+      N >>= 1;
+      trig += N;
+   }
+   N2 = N>>1;
+   N4 = N>>2;
+
+   ALLOC(f, N2, kiss_fft_scalar);
+   ALLOC(f2, N4, kiss_fft_cpx);
+
+   /* Consider the input to be composed of four blocks: [a, b, c, d] */
+   /* Window, shuffle, fold */
+   {
+      /* Temp pointers to make it really clear to the compiler what we're doing */
+      const kiss_fft_scalar * OPUS_RESTRICT xp1 = in+(overlap>>1);
+      const kiss_fft_scalar * OPUS_RESTRICT xp2 = in+N2-1+(overlap>>1);
+      kiss_fft_scalar * OPUS_RESTRICT yp = f;
+      const celt_coef * OPUS_RESTRICT wp1 = window+(overlap>>1);
+      const celt_coef * OPUS_RESTRICT wp2 = window+(overlap>>1)-1;
+      for(i=0;i<((overlap+3)>>2);i++)
+      {
+         /* Real part arranged as -d-cR, Imag part arranged as -b+aR*/
+         *yp++ = S_MUL(xp1[N2], *wp2) + S_MUL(*xp2, *wp1);
+         *yp++ = S_MUL(*xp1, *wp1)    - S_MUL(xp2[-N2], *wp2);
+         xp1+=2;
+         xp2-=2;
+         wp1+=2;
+         wp2-=2;
+      }
+      wp1 = window;
+      wp2 = window+overlap-1;
+      for(;i<N4-((overlap+3)>>2);i++)
+      {
+         /* Real part arranged as a-bR, Imag part arranged as -c-dR */
+         *yp++ = *xp2;
+         *yp++ = *xp1;
+         xp1+=2;
+         xp2-=2;
+      }
+      for(;i<N4;i++)
+      {
+         /* Real part arranged as a-bR, Imag part arranged as -c-dR */
+         *yp++ =  -S_MUL(xp1[-N2], *wp1) + S_MUL(*xp2, *wp2);
+         *yp++ = S_MUL(*xp1, *wp2)     + S_MUL(xp2[N2], *wp1);
+         xp1+=2;
+         xp2-=2;
+         wp1+=2;
+         wp2-=2;
+      }
+   }
+   /* Pre-rotation */
+   {
+      kiss_fft_scalar * OPUS_RESTRICT yp = f;
+      const kiss_twiddle_scalar *t = &trig[0];
+#ifdef FIXED_POINT
+      opus_val32 maxval=1;
+#endif
+      for(i=0;i<N4;i++)
+      {
+         kiss_fft_cpx yc;
+         kiss_twiddle_scalar t0, t1;
+         kiss_fft_scalar re, im, yr, yi;
+         t0 = t[i];
+         t1 = t[N4+i];
+         re = *yp++;
+         im = *yp++;
+         yr = S_MUL(re,t0)  -  S_MUL(im,t1);
+         yi = S_MUL(im,t0)  +  S_MUL(re,t1);
+         /* For QEXT, it's best to scale before the FFT, but otherwise it's best to scale after.
+            For floating-point it doesn't matter. */
+#ifdef ENABLE_QEXT
+         yc.r = yr;
+         yc.i = yi;
+#else
+         yc.r = S_MUL2(yr, scale);
+         yc.i = S_MUL2(yi, scale);
+#endif
+#ifdef FIXED_POINT
+         maxval = MAX32(maxval, MAX32(ABS32(yc.r), ABS32(yc.i)));
+#endif
+         f2[st->bitrev[i]] = yc;
+      }
+#ifdef FIXED_POINT
+      headroom = IMAX(0, IMIN(scale_shift, 28-celt_ilog2(maxval)));
+#endif
+   }
+
+   /* N/4 complex FFT, does not downscale anymore */
+   opus_fft_impl(st, f2 ARG_FIXED(scale_shift-headroom));
+
+   /* Post-rotate */
+   {
+      /* Temp pointers to make it really clear to the compiler what we're doing */
+      const kiss_fft_cpx * OPUS_RESTRICT fp = f2;
+      kiss_fft_scalar * OPUS_RESTRICT yp1 = out;
+      kiss_fft_scalar * OPUS_RESTRICT yp2 = out+stride*(N2-1);
+      const kiss_twiddle_scalar *t = &trig[0];
+      /* Temp pointers to make it really clear to the compiler what we're doing */
+      for(i=0;i<N4;i++)
+      {
+         kiss_fft_scalar yr, yi;
+         kiss_fft_scalar t0, t1;
+#ifdef ENABLE_QEXT
+         t0 = S_MUL2(t[i], scale);
+         t1 = S_MUL2(t[N4+i], scale);
+#else
+         t0 = t[i];
+         t1 = t[N4+i];
+#endif
+         yr = PSHR32(S_MUL(fp->i,t1) - S_MUL(fp->r,t0), headroom);
+         yi = PSHR32(S_MUL(fp->r,t1) + S_MUL(fp->i,t0), headroom);
+         *yp1 = yr;
+         *yp2 = yi;
+         fp++;
+         yp1 += 2*stride;
+         yp2 -= 2*stride;
+      }
+   }
+   RESTORE_STACK;
+}
+#endif /* OVERRIDE_clt_mdct_forward */
+
+#ifndef OVERRIDE_clt_mdct_backward
+void clt_mdct_backward_c(const mdct_lookup *l, kiss_fft_scalar *in, kiss_fft_scalar * OPUS_RESTRICT out,
+      const celt_coef * OPUS_RESTRICT window, int overlap, int shift, int stride, int arch)
+{
+   int i;
+   int N, N2, N4;
+   const kiss_twiddle_scalar *trig;
+   (void) arch;
+
+   N = l->n;
+   trig = l->trig;
+   for (i=0;i<shift;i++)
+   {
+      N >>= 1;
+      trig += N;
+   }
+   N2 = N>>1;
+   N4 = N>>2;
+
+   /* Pre-rotate */
+   {
+      /* Temp pointers to make it really clear to the compiler what we're doing */
+      const kiss_fft_scalar * OPUS_RESTRICT xp1 = in;
+      const kiss_fft_scalar * OPUS_RESTRICT xp2 = in+stride*(N2-1);
+      kiss_fft_scalar * OPUS_RESTRICT yp = out+(overlap>>1);
+      const kiss_twiddle_scalar * OPUS_RESTRICT t = &trig[0];
+      const opus_int16 * OPUS_RESTRICT bitrev = l->kfft[shift]->bitrev;
+      for(i=0;i<N4;i++)
+      {
+         int rev;
+         kiss_fft_scalar yr, yi;
+         opus_val32 x1, x2;
+         rev = *bitrev++;
+         x1 = SHL32(*xp1, IMDCT_HEADROOM);
+         x2 = SHL32(*xp2, IMDCT_HEADROOM);
+         yr = ADD32_ovflw(S_MUL(x2, t[i]), S_MUL(x1, t[N4+i]));
+         yi = SUB32_ovflw(S_MUL(x1, t[i]), S_MUL(x2, t[N4+i]));
+         /* We swap real and imag because we use an FFT instead of an IFFT. */
+         yp[2*rev+1] = yr;
+         yp[2*rev] = yi;
+         /* Storing the pre-rotation directly in the bitrev order. */
+         xp1+=2*stride;
+         xp2-=2*stride;
+      }
+   }
+
+   opus_fft_impl(l->kfft[shift], (kiss_fft_cpx*)(out+(overlap>>1)) ARG_FIXED(0));
+
+   /* Post-rotate and de-shuffle from both ends of the buffer at once to make
+      it in-place. */
+   {
+      kiss_fft_scalar * yp0 = out+(overlap>>1);
+      kiss_fft_scalar * yp1 = out+(overlap>>1)+N2-2;
+      const kiss_twiddle_scalar *t = &trig[0];
+      /* Loop to (N4+1)>>1 to handle odd N4. When N4 is odd, the
+         middle pair will be computed twice. */
+      for(i=0;i<(N4+1)>>1;i++)
+      {
+         kiss_fft_scalar re, im, yr, yi;
+         kiss_twiddle_scalar t0, t1;
+         /* We swap real and imag because we're using an FFT instead of an IFFT. */
+         re = yp0[1];
+         im = yp0[0];
+         t0 = t[i];
+         t1 = t[N4+i];
+         /* We'd scale up by 2 here, but instead it's done when mixing the windows */
+         yr = PSHR32(ADD32_ovflw(S_MUL(re,t0), S_MUL(im,t1)), IMDCT_HEADROOM);
+         yi = PSHR32(SUB32_ovflw(S_MUL(re,t1), S_MUL(im,t0)), IMDCT_HEADROOM);
+         /* We swap real and imag because we're using an FFT instead of an IFFT. */
+         re = yp1[1];
+         im = yp1[0];
+         yp0[0] = yr;
+         yp1[1] = yi;
+
+         t0 = t[(N4-i-1)];
+         t1 = t[(N2-i-1)];
+         /* We'd scale up by 2 here, but instead it's done when mixing the windows */
+         yr = PSHR32(ADD32_ovflw(S_MUL(re,t0), S_MUL(im,t1)), IMDCT_HEADROOM);
+         yi = PSHR32(SUB32_ovflw(S_MUL(re,t1), S_MUL(im,t0)), IMDCT_HEADROOM);
+         yp1[0] = yr;
+         yp0[1] = yi;
+         yp0 += 2;
+         yp1 -= 2;
+      }
+   }
+
+   /* Mirror on both sides for TDAC */
+   {
+      kiss_fft_scalar * OPUS_RESTRICT xp1 = out+overlap-1;
+      kiss_fft_scalar * OPUS_RESTRICT yp1 = out;
+      const celt_coef * OPUS_RESTRICT wp1 = window;
+      const celt_coef * OPUS_RESTRICT wp2 = window+overlap-1;
+
+      for(i = 0; i < overlap/2; i++)
+      {
+         kiss_fft_scalar x1, x2;
+         x1 = *xp1;
+         x2 = *yp1;
+         *yp1++ = SUB32_ovflw(S_MUL(x2, *wp2), S_MUL(x1, *wp1));
+         *xp1-- = ADD32_ovflw(S_MUL(x2, *wp1), S_MUL(x1, *wp2));
+         wp1++;
+         wp2--;
+      }
+   }
+}
+#endif /* OVERRIDE_clt_mdct_backward */

package/opus/celt/mdct.h

@@ -0,0 +1,115 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2008 Xiph.Org Foundation
+   Written by Jean-Marc Valin */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/* This is a simple MDCT implementation that uses a N/4 complex FFT
+   to do most of the work. It should be relatively straightforward to
+   plug in pretty much and FFT here.
+
+   This replaces the Vorbis FFT (and uses the exact same API), which
+   was a bit too messy and that was ending up duplicating code
+   (might as well use the same FFT everywhere).
+
+   The algorithm is similar to (and inspired from) Fabrice Bellard's
+   MDCT implementation in FFMPEG, but has differences in signs, ordering
+   and scaling in many places.
+*/
+
+#ifndef MDCT_H
+#define MDCT_H
+
+#include "opus_defines.h"
+#include "kiss_fft.h"
+#include "arch.h"
+
+typedef struct {
+   int n;
+   int maxshift;
+   const kiss_fft_state *kfft[4];
+   const kiss_twiddle_scalar * OPUS_RESTRICT trig;
+} mdct_lookup;
+
+#if defined(HAVE_ARM_NE10)
+#include "arm/mdct_arm.h"
+#endif
+
+/* There should be 2 bits of headroom in the IMDCT which we can take
+   advantage of to maximize accuracy. */
+#define IMDCT_HEADROOM 2
+
+int clt_mdct_init(mdct_lookup *l,int N, int maxshift, int arch);
+void clt_mdct_clear(mdct_lookup *l, int arch);
+
+/** Compute a forward MDCT and scale by 4/N, trashes the input array */
+void clt_mdct_forward_c(const mdct_lookup *l, kiss_fft_scalar *in,
+                        kiss_fft_scalar * OPUS_RESTRICT out,
+                        const celt_coef *window, int overlap,
+                        int shift, int stride, int arch);
+
+/** Compute a backward MDCT (no scaling) and performs weighted overlap-add
+    (scales implicitly by 1/2) */
+void clt_mdct_backward_c(const mdct_lookup *l, kiss_fft_scalar *in,
+      kiss_fft_scalar * OPUS_RESTRICT out,
+      const celt_coef * OPUS_RESTRICT window,
+      int overlap, int shift, int stride, int arch);
+
+#if !defined(OVERRIDE_OPUS_MDCT)
+/* Is run-time CPU detection enabled on this platform? */
+#if defined(OPUS_HAVE_RTCD) && defined(HAVE_ARM_NE10)
+
+extern void (*const CLT_MDCT_FORWARD_IMPL[OPUS_ARCHMASK+1])(
+      const mdct_lookup *l, kiss_fft_scalar *in,
+      kiss_fft_scalar * OPUS_RESTRICT out, const celt_coef *window,
+      int overlap, int shift, int stride, int arch);
+
+#define clt_mdct_forward(_l, _in, _out, _window, _overlap, _shift, _stride, _arch) \
+   ((*CLT_MDCT_FORWARD_IMPL[(arch)&OPUS_ARCHMASK])(_l, _in, _out, \
+                                                   _window, _overlap, _shift, \
+                                                   _stride, _arch))
+
+extern void (*const CLT_MDCT_BACKWARD_IMPL[OPUS_ARCHMASK+1])(
+      const mdct_lookup *l, kiss_fft_scalar *in,
+      kiss_fft_scalar * OPUS_RESTRICT out, const celt_coef *window,
+      int overlap, int shift, int stride, int arch);
+
+#define clt_mdct_backward(_l, _in, _out, _window, _overlap, _shift, _stride, _arch) \
+   (*CLT_MDCT_BACKWARD_IMPL[(arch)&OPUS_ARCHMASK])(_l, _in, _out, \
+                                                   _window, _overlap, _shift, \
+                                                   _stride, _arch)
+
+#else /* if defined(OPUS_HAVE_RTCD) && defined(HAVE_ARM_NE10) */
+
+#define clt_mdct_forward(_l, _in, _out, _window, _overlap, _shift, _stride, _arch) \
+   clt_mdct_forward_c(_l, _in, _out, _window, _overlap, _shift, _stride, _arch)
+
+#define clt_mdct_backward(_l, _in, _out, _window, _overlap, _shift, _stride, _arch) \
+   clt_mdct_backward_c(_l, _in, _out, _window, _overlap, _shift, _stride, _arch)
+
+#endif /* end if defined(OPUS_HAVE_RTCD) && defined(HAVE_ARM_NE10) && !defined(FIXED_POINT) */
+#endif /* end if !defined(OVERRIDE_OPUS_MDCT) */
+
+#endif

package/opus/celt/meson.build

@@ -0,0 +1,64 @@
+celt_sources = sources['CELT_SOURCES']
+
+celt_sse_sources = sources['CELT_SOURCES_SSE']
+
+celt_sse2_sources = sources['CELT_SOURCES_SSE2']
+
+celt_sse4_1_sources = sources['CELT_SOURCES_SSE4_1']
+
+celt_avx2_sources = sources['CELT_SOURCES_AVX2']
+
+celt_neon_intr_sources = sources['CELT_SOURCES_ARM_NEON_INTR']
+
+celt_static_libs = []
+
+if host_cpu_family in ['x86', 'x86_64'] and opus_conf.has('OPUS_HAVE_RTCD')
+  celt_sources +=  sources['CELT_SOURCES_X86_RTCD']
+endif
+
+foreach intr_name : ['sse', 'sse2', 'sse4_1', 'avx2', 'neon_intr']
+  have_intr = get_variable('have_' + intr_name)
+  if not have_intr
+    continue
+  endif
+
+  intr_sources = get_variable('celt_@0@_sources'.format(intr_name))
+  intr_args = get_variable('opus_@0@_args'.format(intr_name), [])
+  celt_static_libs += static_library('celt_' + intr_name, intr_sources,
+      c_args: intr_args,
+      include_directories: opus_includes,
+      install: false)
+endforeach
+
+have_arm_intrinsics_or_asm = have_arm_ne10
+if (intrinsics_support.length() + asm_optimization.length() + inline_optimization.length()) > 0
+  have_arm_intrinsics_or_asm = true
+endif
+
+if host_cpu_family in ['arm', 'aarch64'] and have_arm_intrinsics_or_asm
+  if opus_conf.has('OPUS_HAVE_RTCD')
+    celt_sources +=  sources['CELT_SOURCES_ARM_RTCD']
+  endif
+  if have_arm_ne10
+    celt_sources += sources['CELT_SOURCES_ARM_NE10']
+  endif
+  if opus_arm_external_asm
+    subdir('arm')
+    celt_static_libs += static_library('celt-armasm',
+      celt_arm_armopts_s, celt_sources_arm_asm,
+      install: false)
+  endif
+endif
+
+celt_c_args = []
+if host_system == 'windows'
+  celt_c_args += ['-DDLL_EXPORT']
+endif
+
+celt_lib = static_library('opus-celt',
+  celt_sources,
+  c_args: celt_c_args,
+  include_directories: opus_includes,
+  link_whole: celt_static_libs,
+  dependencies: libm,
+  install: false)

package/opus/celt/mfrngcod.h

@@ -0,0 +1,48 @@
+/* Copyright (c) 2001-2008 Timothy B. Terriberry
+   Copyright (c) 2008-2009 Xiph.Org Foundation */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#if !defined(_mfrngcode_H)
+# define _mfrngcode_H (1)
+# include "entcode.h"
+
+/*Constants used by the entropy encoder/decoder.*/
+
+/*The number of bits to output at a time.*/
+# define EC_SYM_BITS   (8)
+/*The total number of bits in each of the state registers.*/
+# define EC_CODE_BITS  (32)
+/*The maximum symbol value.*/
+# define EC_SYM_MAX    ((1U<<EC_SYM_BITS)-1)
+/*Bits to shift by to move a symbol into the high-order position.*/
+# define EC_CODE_SHIFT (EC_CODE_BITS-EC_SYM_BITS-1)
+/*Carry bit of the high-order range symbol.*/
+# define EC_CODE_TOP   (((opus_uint32)1U)<<(EC_CODE_BITS-1))
+/*Low-order bit of the high-order range symbol.*/
+# define EC_CODE_BOT   (EC_CODE_TOP>>EC_SYM_BITS)
+/*The number of bits available for the last, partial symbol in the code field.*/
+# define EC_CODE_EXTRA ((EC_CODE_BITS-2)%EC_SYM_BITS+1)
+#endif