@scriptc/cli-darwin-x64 0.0.0 → 0.2.1

package/dist/lib/runtime-sources/vendor/mbedtls/include/mbedtls/cmac.h

@@ -0,0 +1,246 @@
+/**
+ * \file cmac.h
+ *
+ * \brief This file contains CMAC definitions and functions.
+ *
+ * The Cipher-based Message Authentication Code (CMAC) Mode for
+ * Authentication is defined in <em>RFC-4493: The AES-CMAC Algorithm</em>.
+ * It is supported with AES and DES.
+ */
+/*
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+ */
+
+#ifndef MBEDTLS_CMAC_H
+#define MBEDTLS_CMAC_H
+#include "mbedtls/private_access.h"
+
+#include "mbedtls/build_info.h"
+
+#include "mbedtls/cipher.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define MBEDTLS_AES_BLOCK_SIZE          16
+#define MBEDTLS_DES3_BLOCK_SIZE         8
+
+/* We don't support Camellia or ARIA in this module */
+#if defined(MBEDTLS_AES_C)
+#define MBEDTLS_CMAC_MAX_BLOCK_SIZE      16  /**< The longest block used by CMAC is that of AES. */
+#else
+#define MBEDTLS_CMAC_MAX_BLOCK_SIZE      8   /**< The longest block used by CMAC is that of 3DES. */
+#endif
+
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+/** The longest block supported by the cipher module.
+ *
+ * \deprecated
+ * For the maximum block size of a cipher supported by the CMAC module,
+ * use #MBEDTLS_CMAC_MAX_BLOCK_SIZE.
+ * For the maximum block size of a cipher supported by the cipher module,
+ * use #MBEDTLS_MAX_BLOCK_LENGTH.
+ */
+/* Before Mbed TLS 3.5, this was the maximum block size supported by the CMAC
+ * module, so it didn't take Camellia or ARIA into account. Since the name
+ * of the macro doesn't even convey "CMAC", this was misleading. Now the size
+ * is sufficient for any cipher, but the name is defined in cmac.h for
+ * backward compatibility. */
+#define MBEDTLS_CIPHER_BLKSIZE_MAX MBEDTLS_MAX_BLOCK_LENGTH
+#endif /* MBEDTLS_DEPRECATED_REMOVED */
+
+#if !defined(MBEDTLS_CMAC_ALT)
+
+/**
+ * The CMAC context structure.
+ */
+struct mbedtls_cmac_context_t {
+    /** The internal state of the CMAC algorithm.  */
+    unsigned char       MBEDTLS_PRIVATE(state)[MBEDTLS_CMAC_MAX_BLOCK_SIZE];
+
+    /** Unprocessed data - either data that was not block aligned and is still
+     *  pending processing, or the final block. */
+    unsigned char       MBEDTLS_PRIVATE(unprocessed_block)[MBEDTLS_CMAC_MAX_BLOCK_SIZE];
+
+    /** The length of data pending processing. */
+    size_t              MBEDTLS_PRIVATE(unprocessed_len);
+};
+
+#else  /* !MBEDTLS_CMAC_ALT */
+#include "cmac_alt.h"
+#endif /* !MBEDTLS_CMAC_ALT */
+
+/**
+ * \brief               This function starts a new CMAC computation
+ *                      by setting the CMAC key, and preparing to authenticate
+ *                      the input data.
+ *                      It must be called with an initialized cipher context.
+ *
+ *                      Once this function has completed, data can be supplied
+ *                      to the CMAC computation by calling
+ *                      mbedtls_cipher_cmac_update().
+ *
+ *                      To start a CMAC computation using the same key as a previous
+ *                      CMAC computation, use mbedtls_cipher_cmac_finish().
+ *
+ * \note                When the CMAC implementation is supplied by an alternate
+ *                      implementation (through #MBEDTLS_CMAC_ALT), some ciphers
+ *                      may not be supported by that implementation, and thus
+ *                      return an error. Alternate implementations must support
+ *                      AES-128 and AES-256, and may support AES-192 and 3DES.
+ *
+ * \param ctx           The cipher context used for the CMAC operation, initialized
+ *                      as one of the following types: MBEDTLS_CIPHER_AES_128_ECB,
+ *                      MBEDTLS_CIPHER_AES_192_ECB, MBEDTLS_CIPHER_AES_256_ECB,
+ *                      or MBEDTLS_CIPHER_DES_EDE3_ECB.
+ * \param key           The CMAC key.
+ * \param keybits       The length of the CMAC key in bits.
+ *                      Must be supported by the cipher.
+ *
+ * \return              \c 0 on success.
+ * \return              A cipher-specific error code on failure.
+ */
+int mbedtls_cipher_cmac_starts(mbedtls_cipher_context_t *ctx,
+                               const unsigned char *key, size_t keybits);
+
+/**
+ * \brief               This function feeds an input buffer into an ongoing CMAC
+ *                      computation.
+ *
+ *                      The CMAC computation must have previously been started
+ *                      by calling mbedtls_cipher_cmac_starts() or
+ *                      mbedtls_cipher_cmac_reset().
+ *
+ *                      Call this function as many times as needed to input the
+ *                      data to be authenticated.
+ *                      Once all of the required data has been input,
+ *                      call mbedtls_cipher_cmac_finish() to obtain the result
+ *                      of the CMAC operation.
+ *
+ * \param ctx           The cipher context used for the CMAC operation.
+ * \param input         The buffer holding the input data.
+ * \param ilen          The length of the input data.
+ *
+ * \return             \c 0 on success.
+ * \return             #MBEDTLS_ERR_MD_BAD_INPUT_DATA
+ *                     if parameter verification fails.
+ */
+int mbedtls_cipher_cmac_update(mbedtls_cipher_context_t *ctx,
+                               const unsigned char *input, size_t ilen);
+
+/**
+ * \brief               This function finishes an ongoing CMAC operation, and
+ *                      writes the result to the output buffer.
+ *
+ *                      It should be followed either by
+ *                      mbedtls_cipher_cmac_reset(), which starts another CMAC
+ *                      operation with the same key, or mbedtls_cipher_free(),
+ *                      which clears the cipher context.
+ *
+ * \param ctx           The cipher context used for the CMAC operation.
+ * \param output        The output buffer for the CMAC checksum result.
+ *
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_MD_BAD_INPUT_DATA
+ *                      if parameter verification fails.
+ */
+int mbedtls_cipher_cmac_finish(mbedtls_cipher_context_t *ctx,
+                               unsigned char *output);
+
+/**
+ * \brief               This function starts a new CMAC operation with the same
+ *                      key as the previous one.
+ *
+ *                      It should be called after finishing the previous CMAC
+ *                      operation with mbedtls_cipher_cmac_finish().
+ *                      After calling this function,
+ *                      call mbedtls_cipher_cmac_update() to supply the new
+ *                      CMAC operation with data.
+ *
+ * \param ctx           The cipher context used for the CMAC operation.
+ *
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_MD_BAD_INPUT_DATA
+ *                      if parameter verification fails.
+ */
+int mbedtls_cipher_cmac_reset(mbedtls_cipher_context_t *ctx);
+
+/**
+ * \brief               This function calculates the full generic CMAC
+ *                      on the input buffer with the provided key.
+ *
+ *                      The function allocates the context, performs the
+ *                      calculation, and frees the context.
+ *
+ *                      The CMAC result is calculated as
+ *                      output = generic CMAC(cmac key, input buffer).
+ *
+ * \note                When the CMAC implementation is supplied by an alternate
+ *                      implementation (through #MBEDTLS_CMAC_ALT), some ciphers
+ *                      may not be supported by that implementation, and thus
+ *                      return an error. Alternate implementations must support
+ *                      AES-128 and AES-256, and may support AES-192 and 3DES.
+ *
+ * \param cipher_info   The cipher information.
+ * \param key           The CMAC key.
+ * \param keylen        The length of the CMAC key in bits.
+ * \param input         The buffer holding the input data.
+ * \param ilen          The length of the input data.
+ * \param output        The buffer for the generic CMAC result.
+ *
+ * \return              \c 0 on success.
+ * \return              #MBEDTLS_ERR_MD_BAD_INPUT_DATA
+ *                      if parameter verification fails.
+ */
+int mbedtls_cipher_cmac(const mbedtls_cipher_info_t *cipher_info,
+                        const unsigned char *key, size_t keylen,
+                        const unsigned char *input, size_t ilen,
+                        unsigned char *output);
+
+#if defined(MBEDTLS_AES_C)
+/**
+ * \brief           This function implements the AES-CMAC-PRF-128 pseudorandom
+ *                  function, as defined in
+ *                  <em>RFC-4615: The Advanced Encryption Standard-Cipher-based
+ *                  Message Authentication Code-Pseudo-Random Function-128
+ *                  (AES-CMAC-PRF-128) Algorithm for the Internet Key
+ *                  Exchange Protocol (IKE).</em>
+ *
+ * \param key       The key to use.
+ * \param key_len   The key length in Bytes.
+ * \param input     The buffer holding the input data.
+ * \param in_len    The length of the input data in Bytes.
+ * \param output    The buffer holding the generated 16 Bytes of
+ *                  pseudorandom output.
+ *
+ * \return          \c 0 on success.
+ */
+int mbedtls_aes_cmac_prf_128(const unsigned char *key, size_t key_len,
+                             const unsigned char *input, size_t in_len,
+                             unsigned char output[16]);
+#endif /* MBEDTLS_AES_C */
+
+#if defined(MBEDTLS_SELF_TEST) && (defined(MBEDTLS_AES_C) || defined(MBEDTLS_DES_C))
+/**
+ * \brief          The CMAC checkup routine.
+ *
+ * \note           In case the CMAC routines are provided by an alternative
+ *                 implementation (i.e. #MBEDTLS_CMAC_ALT is defined), the
+ *                 checkup routine will succeed even if the implementation does
+ *                 not support the less widely used AES-192 or 3DES primitives.
+ *                 The self-test requires at least AES-128 and AES-256 to be
+ *                 supported by the underlying implementation.
+ *
+ * \return         \c 0 on success.
+ * \return         \c 1 on failure.
+ */
+int mbedtls_cmac_self_test(int verbose);
+#endif /* MBEDTLS_SELF_TEST && ( MBEDTLS_AES_C || MBEDTLS_DES_C ) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBEDTLS_CMAC_H */

package/dist/lib/runtime-sources/vendor/mbedtls/include/mbedtls/compat-2.x.h

@@ -0,0 +1,46 @@
+/**
+ * \file compat-2.x.h
+ *
+ * \brief Compatibility definitions
+ *
+ * \deprecated Use the new names directly instead
+ */
+/*
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+ */
+
+#if defined(MBEDTLS_DEPRECATED_WARNING)
+#warning "Including compat-2.x.h is deprecated"
+#endif
+
+#ifndef MBEDTLS_COMPAT2X_H
+#define MBEDTLS_COMPAT2X_H
+
+/*
+ * Macros for renamed functions
+ */
+#define mbedtls_ctr_drbg_update_ret   mbedtls_ctr_drbg_update
+#define mbedtls_hmac_drbg_update_ret  mbedtls_hmac_drbg_update
+#define mbedtls_md5_starts_ret        mbedtls_md5_starts
+#define mbedtls_md5_update_ret        mbedtls_md5_update
+#define mbedtls_md5_finish_ret        mbedtls_md5_finish
+#define mbedtls_md5_ret               mbedtls_md5
+#define mbedtls_ripemd160_starts_ret  mbedtls_ripemd160_starts
+#define mbedtls_ripemd160_update_ret  mbedtls_ripemd160_update
+#define mbedtls_ripemd160_finish_ret  mbedtls_ripemd160_finish
+#define mbedtls_ripemd160_ret         mbedtls_ripemd160
+#define mbedtls_sha1_starts_ret       mbedtls_sha1_starts
+#define mbedtls_sha1_update_ret       mbedtls_sha1_update
+#define mbedtls_sha1_finish_ret       mbedtls_sha1_finish
+#define mbedtls_sha1_ret              mbedtls_sha1
+#define mbedtls_sha256_starts_ret     mbedtls_sha256_starts
+#define mbedtls_sha256_update_ret     mbedtls_sha256_update
+#define mbedtls_sha256_finish_ret     mbedtls_sha256_finish
+#define mbedtls_sha256_ret            mbedtls_sha256
+#define mbedtls_sha512_starts_ret     mbedtls_sha512_starts
+#define mbedtls_sha512_update_ret     mbedtls_sha512_update
+#define mbedtls_sha512_finish_ret     mbedtls_sha512_finish
+#define mbedtls_sha512_ret            mbedtls_sha512
+
+#endif /* MBEDTLS_COMPAT2X_H */