@scriptc/cli-darwin-x64 0.0.0 → 0.2.1

package/dist/lib/runtime-sources/vendor/mbedtls/library/mps_common.h

@@ -0,0 +1,181 @@
+/*
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+ */
+
+/**
+ * \file mps_common.h
+ *
+ * \brief Common functions and macros used by MPS
+ */
+
+#ifndef MBEDTLS_MPS_COMMON_H
+#define MBEDTLS_MPS_COMMON_H
+
+#include "mps_error.h"
+
+#include <stdio.h>
+
+/**
+ * \name SECTION:       MPS Configuration
+ *
+ * \{
+ */
+
+/*! This flag controls whether the MPS-internal components
+ *  (reader, writer, Layer 1-3) perform validation of the
+ *  expected abstract state at the entry of API calls.
+ *
+ *  Context: All MPS API functions impose assumptions/preconditions on the
+ *  context on which they operate. For example, every structure has a notion of
+ *  state integrity which is established by `xxx_init()` and preserved by any
+ *  calls to the MPS API which satisfy their preconditions and either succeed,
+ *  or fail with an error code which is explicitly documented to not corrupt
+ *  structure integrity (such as WANT_READ and WANT_WRITE);
+ *  apart from `xxx_init()` any function assumes state integrity as a
+ *  precondition (but usually more). If any of the preconditions is violated,
+ *  the function's behavior is entirely undefined.
+ *  In addition to state integrity, all MPS structures have a more refined
+ *  notion of abstract state that the API operates on. For example, all layers
+ *  have a notion of 'abstract read state' which indicates if incoming data has
+ *  been passed to the user, e.g. through mps_l2_read_start() for Layer 2
+ *  or mps_l3_read() in Layer 3. After such a call, it doesn't make sense to
+ *  call these reading functions again until the incoming data has been
+ *  explicitly 'consumed', e.g. through mps_l2_read_consume() for Layer 2 or
+ *  mps_l3_read_consume() on Layer 3. However, even if it doesn't make sense,
+ *  it's a design choice whether the API should fail gracefully on such
+ *  non-sensical calls or not, and that's what this option is about:
+ *
+ *  This option determines whether the expected abstract state
+ *  is part of the API preconditions or not: If the option is set,
+ *  then the abstract state is not part of the precondition and is
+ *  thus required to be validated by the implementation. If an unexpected
+ *  abstract state is encountered, the implementation must fail gracefully
+ *  with error #MBEDTLS_ERR_MPS_OPERATION_UNEXPECTED.
+ *  Conversely, if this option is not set, then the expected abstract state
+ *  is included in the preconditions of the respective API calls, and
+ *  an implementation's behaviour is undefined if the abstract state is
+ *  not as expected.
+ *
+ *  For example: Enabling this makes mps_l2_read_done() fail if
+ *  no incoming record is currently open; disabling this would
+ *  lead to undefined behavior in this case.
+ *
+ *  Comment this to remove state validation.
+ */
+#define MBEDTLS_MPS_STATE_VALIDATION
+
+/*! This flag enables/disables assertions on the internal state of MPS.
+ *
+ *  Assertions are sanity checks that should never trigger when MPS
+ *  is used within the bounds of its API and preconditions.
+ *
+ *  Enabling this increases security by limiting the scope of
+ *  potential bugs, but comes at the cost of increased code size.
+ *
+ *  Note: So far, there is no guiding principle as to what
+ *  expected conditions merit an assertion, and which don't.
+ *
+ *  Comment this to disable assertions.
+ */
+#define MBEDTLS_MPS_ENABLE_ASSERTIONS
+
+/*! This flag controls whether tracing for MPS should be enabled. */
+//#define MBEDTLS_MPS_ENABLE_TRACE
+
+#if defined(MBEDTLS_MPS_STATE_VALIDATION)
+
+#define MBEDTLS_MPS_STATE_VALIDATE_RAW(cond, string)                         \
+    do                                                                         \
+    {                                                                          \
+        if (!(cond))                                                          \
+        {                                                                      \
+            MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_ERROR, string);         \
+            MBEDTLS_MPS_TRACE_RETURN(MBEDTLS_ERR_MPS_OPERATION_UNEXPECTED);  \
+        }                                                                      \
+    } while (0)
+
+#else /* MBEDTLS_MPS_STATE_VALIDATION */
+
+#define MBEDTLS_MPS_STATE_VALIDATE_RAW(cond, string)           \
+    do                                                           \
+    {                                                            \
+        (cond);                                                \
+    } while (0)
+
+#endif /* MBEDTLS_MPS_STATE_VALIDATION */
+
+#if defined(MBEDTLS_MPS_ENABLE_ASSERTIONS)
+
+#define MBEDTLS_MPS_ASSERT_RAW(cond, string)                          \
+    do                                                                  \
+    {                                                                   \
+        if (!(cond))                                                   \
+        {                                                               \
+            MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_ERROR, string);  \
+            MBEDTLS_MPS_TRACE_RETURN(MBEDTLS_ERR_MPS_INTERNAL_ERROR); \
+        }                                                               \
+    } while (0)
+
+#else /* MBEDTLS_MPS_ENABLE_ASSERTIONS */
+
+#define MBEDTLS_MPS_ASSERT_RAW(cond, string) do {} while (0)
+
+#endif /* MBEDTLS_MPS_ENABLE_ASSERTIONS */
+
+
+/* \} name SECTION: MPS Configuration */
+
+/**
+ * \name SECTION:       Common types
+ *
+ * Various common types used throughout MPS.
+ * \{
+ */
+
+/** \brief   The type of buffer sizes and offsets used in MPS structures.
+ *
+ *           This is an unsigned integer type that should be large enough to
+ *           hold the length of any buffer or message processed by MPS.
+ *
+ *           The reason to pick a value as small as possible here is
+ *           to reduce the size of MPS structures.
+ *
+ * \warning  Care has to be taken when using a narrower type
+ *           than ::mbedtls_mps_size_t here because of
+ *           potential truncation during conversion.
+ *
+ * \warning  Handshake messages in TLS may be up to 2^24 ~ 16Mb in size.
+ *           If mbedtls_mps_[opt_]stored_size_t is smaller than that, the
+ *           maximum handshake message is restricted accordingly.
+ *
+ * For now, we use the default type of size_t throughout, and the use of
+ * smaller types or different types for ::mbedtls_mps_size_t and
+ * ::mbedtls_mps_stored_size_t is not yet supported.
+ *
+ */
+typedef size_t mbedtls_mps_stored_size_t;
+#define MBEDTLS_MPS_STORED_SIZE_MAX  (SIZE_MAX)
+
+/** \brief The type of buffer sizes and offsets used in the MPS API
+ *         and implementation.
+ *
+ *         This must be at least as wide as ::mbedtls_stored_size_t but
+ *         may be chosen to be strictly larger if more suitable for the
+ *         target architecture.
+ *
+ *         For example, in a test build for ARM Thumb, using uint_fast16_t
+ *         instead of uint16_t reduced the code size from 1060 Byte to 962 Byte,
+ *         so almost 10%.
+ */
+typedef size_t mbedtls_mps_size_t;
+#define MBEDTLS_MPS_SIZE_MAX  (SIZE_MAX)
+
+#if MBEDTLS_MPS_STORED_SIZE_MAX > MBEDTLS_MPS_SIZE_MAX
+#error "Misconfiguration of mbedtls_mps_size_t and mbedtls_mps_stored_size_t."
+#endif
+
+/* \} SECTION: Common types */
+
+
+#endif /* MBEDTLS_MPS_COMMON_H */

package/dist/lib/runtime-sources/vendor/mbedtls/library/mps_error.h

@@ -0,0 +1,89 @@
+/*
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+ */
+
+/**
+ * \file mps_error.h
+ *
+ * \brief Error codes used by MPS
+ */
+
+#ifndef MBEDTLS_MPS_ERROR_H
+#define MBEDTLS_MPS_ERROR_H
+
+
+/* TODO: The error code allocation needs to be revisited:
+ *
+ * - Should we make (some of) the MPS Reader error codes public?
+ *   If so, we need to adjust MBEDTLS_MPS_READER_MAKE_ERROR() to hit
+ *   a gap in the Mbed TLS public error space.
+ *   If not, we have to make sure we don't forward those errors
+ *   at the level of the public API -- no risk at the moment as
+ *   long as MPS is an experimental component not accessible from
+ *   public API.
+ */
+
+/**
+ * \name SECTION:       MPS general error codes
+ *
+ * \{
+ */
+
+#ifndef MBEDTLS_MPS_ERR_BASE
+#define MBEDTLS_MPS_ERR_BASE (0)
+#endif
+
+#define MBEDTLS_MPS_MAKE_ERROR(code) \
+    (-(MBEDTLS_MPS_ERR_BASE | (code)))
+
+#define MBEDTLS_ERR_MPS_OPERATION_UNEXPECTED  MBEDTLS_MPS_MAKE_ERROR(0x1)
+#define MBEDTLS_ERR_MPS_INTERNAL_ERROR        MBEDTLS_MPS_MAKE_ERROR(0x2)
+
+/* \} name SECTION: MPS general error codes */
+
+/**
+ * \name SECTION:       MPS Reader error codes
+ *
+ * \{
+ */
+
+#ifndef MBEDTLS_MPS_READER_ERR_BASE
+#define MBEDTLS_MPS_READER_ERR_BASE (1 << 8)
+#endif
+
+#define MBEDTLS_MPS_READER_MAKE_ERROR(code) \
+    (-(MBEDTLS_MPS_READER_ERR_BASE | (code)))
+
+/*! An attempt to reclaim the data buffer from a reader failed because
+ *  the user hasn't yet read and committed all of it. */
+#define MBEDTLS_ERR_MPS_READER_DATA_LEFT             MBEDTLS_MPS_READER_MAKE_ERROR(0x1)
+
+/*! An invalid argument was passed to the reader. */
+#define MBEDTLS_ERR_MPS_READER_INVALID_ARG           MBEDTLS_MPS_READER_MAKE_ERROR(0x2)
+
+/*! An attempt to move a reader to consuming mode through mbedtls_mps_reader_feed()
+ *  after pausing failed because the provided data is not sufficient to serve the
+ *  read requests that led to the pausing. */
+#define MBEDTLS_ERR_MPS_READER_NEED_MORE             MBEDTLS_MPS_READER_MAKE_ERROR(0x3)
+
+/*! A get request failed because not enough data is available in the reader. */
+#define MBEDTLS_ERR_MPS_READER_OUT_OF_DATA           MBEDTLS_MPS_READER_MAKE_ERROR(0x4)
+
+/*!< A get request after pausing and reactivating the reader failed because
+ *   the request is not in line with the request made prior to pausing. The user
+ *   must not change it's 'strategy' after pausing and reactivating a reader. */
+#define MBEDTLS_ERR_MPS_READER_INCONSISTENT_REQUESTS MBEDTLS_MPS_READER_MAKE_ERROR(0x5)
+
+/*! An attempt to reclaim the data buffer from a reader failed because the reader
+ *  has no accumulator it can use to backup the data that hasn't been processed. */
+#define MBEDTLS_ERR_MPS_READER_NEED_ACCUMULATOR      MBEDTLS_MPS_READER_MAKE_ERROR(0x6)
+
+/*! An attempt to reclaim the data buffer from a reader failed because the
+ *  accumulator passed to the reader is not large enough to hold both the
+ *  data that hasn't been processed and the excess of the last read-request. */
+#define MBEDTLS_ERR_MPS_READER_ACCUMULATOR_TOO_SMALL MBEDTLS_MPS_READER_MAKE_ERROR(0x7)
+
+/* \} name SECTION: MPS Reader error codes */
+
+#endif /* MBEDTLS_MPS_ERROR_H */