@rtzh/engine 0.0.3 → 0.0.4

package/Build/Workers/createRectangleOutlineGeometry.js

@@ -0,0 +1,476 @@
+/**
+ * @license
+ * Cesium - https://github.com/CesiumGS/cesium
+ * Version 0.0.4
+ *
+ * Copyright 2011-2022 Cesium Contributors
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Columbus View (Pat. Pend.)
+ *
+ * Portions licensed separately.
+ * See https://github.com/CesiumGS/cesium/blob/main/LICENSE.md for full licensing details.
+ */
+
+import {
+  RectangleGeometryLibrary_default
+} from "./chunk-IDVURFRN.js";
+import {
+  GeometryOffsetAttribute_default
+} from "./chunk-J3FBVUY4.js";
+import {
+  PolygonPipeline_default
+} from "./chunk-3K2PK2OU.js";
+import "./chunk-5QTPACZQ.js";
+import {
+  IndexDatatype_default
+} from "./chunk-KBAGFNQ4.js";
+import {
+  GeometryAttributes_default
+} from "./chunk-ZV42SJKS.js";
+import {
+  GeometryAttribute_default,
+  Geometry_default,
+  PrimitiveType_default
+} from "./chunk-2BLQ3B4Q.js";
+import {
+  BoundingSphere_default
+} from "./chunk-UOD5YNH3.js";
+import "./chunk-5BIQOSBV.js";
+import {
+  Rectangle_default
+} from "./chunk-HAWJ7FMN.js";
+import "./chunk-EISI2CR2.js";
+import {
+  ComponentDatatype_default
+} from "./chunk-Z356SW7E.js";
+import "./chunk-DEIMB3B5.js";
+import "./chunk-HI6X33GO.js";
+import {
+  Cartographic_default,
+  Ellipsoid_default
+} from "./chunk-F5LAPCFC.js";
+import {
+  Cartesian3_default,
+  Frozen_default
+} from "./chunk-VR2L2Y4Z.js";
+import {
+  Math_default
+} from "./chunk-WMGESUDW.js";
+import {
+  DeveloperError_default
+} from "./chunk-HGIGANIQ.js";
+import {
+  defined_default
+} from "./chunk-BN4WA7LX.js";
+
+// packages/engine/Source/Core/RectangleOutlineGeometry.js
+var bottomBoundingSphere = new BoundingSphere_default();
+var topBoundingSphere = new BoundingSphere_default();
+var positionScratch = new Cartesian3_default();
+var rectangleScratch = new Rectangle_default();
+function constructRectangle(geometry, computedOptions) {
+  const ellipsoid = geometry._ellipsoid;
+  const height = computedOptions.height;
+  const width = computedOptions.width;
+  const northCap = computedOptions.northCap;
+  const southCap = computedOptions.southCap;
+  let rowHeight = height;
+  let widthMultiplier = 2;
+  let size = 0;
+  let corners = 4;
+  if (northCap) {
+    widthMultiplier -= 1;
+    rowHeight -= 1;
+    size += 1;
+    corners -= 2;
+  }
+  if (southCap) {
+    widthMultiplier -= 1;
+    rowHeight -= 1;
+    size += 1;
+    corners -= 2;
+  }
+  size += widthMultiplier * width + 2 * rowHeight - corners;
+  const positions = new Float64Array(size * 3);
+  let posIndex = 0;
+  let row = 0;
+  let col;
+  const position = positionScratch;
+  if (northCap) {
+    RectangleGeometryLibrary_default.computePosition(
+      computedOptions,
+      ellipsoid,
+      false,
+      row,
+      0,
+      position
+    );
+    positions[posIndex++] = position.x;
+    positions[posIndex++] = position.y;
+    positions[posIndex++] = position.z;
+  } else {
+    for (col = 0; col < width; col++) {
+      RectangleGeometryLibrary_default.computePosition(
+        computedOptions,
+        ellipsoid,
+        false,
+        row,
+        col,
+        position
+      );
+      positions[posIndex++] = position.x;
+      positions[posIndex++] = position.y;
+      positions[posIndex++] = position.z;
+    }
+  }
+  col = width - 1;
+  for (row = 1; row < height; row++) {
+    RectangleGeometryLibrary_default.computePosition(
+      computedOptions,
+      ellipsoid,
+      false,
+      row,
+      col,
+      position
+    );
+    positions[posIndex++] = position.x;
+    positions[posIndex++] = position.y;
+    positions[posIndex++] = position.z;
+  }
+  row = height - 1;
+  if (!southCap) {
+    for (col = width - 2; col >= 0; col--) {
+      RectangleGeometryLibrary_default.computePosition(
+        computedOptions,
+        ellipsoid,
+        false,
+        row,
+        col,
+        position
+      );
+      positions[posIndex++] = position.x;
+      positions[posIndex++] = position.y;
+      positions[posIndex++] = position.z;
+    }
+  }
+  col = 0;
+  for (row = height - 2; row > 0; row--) {
+    RectangleGeometryLibrary_default.computePosition(
+      computedOptions,
+      ellipsoid,
+      false,
+      row,
+      col,
+      position
+    );
+    positions[posIndex++] = position.x;
+    positions[posIndex++] = position.y;
+    positions[posIndex++] = position.z;
+  }
+  const indicesSize = positions.length / 3 * 2;
+  const indices = IndexDatatype_default.createTypedArray(
+    positions.length / 3,
+    indicesSize
+  );
+  let index = 0;
+  for (let i = 0; i < positions.length / 3 - 1; i++) {
+    indices[index++] = i;
+    indices[index++] = i + 1;
+  }
+  indices[index++] = positions.length / 3 - 1;
+  indices[index++] = 0;
+  const geo = new Geometry_default({
+    attributes: new GeometryAttributes_default(),
+    primitiveType: PrimitiveType_default.LINES
+  });
+  geo.attributes.position = new GeometryAttribute_default({
+    componentDatatype: ComponentDatatype_default.DOUBLE,
+    componentsPerAttribute: 3,
+    values: positions
+  });
+  geo.indices = indices;
+  return geo;
+}
+function constructExtrudedRectangle(rectangleGeometry, computedOptions) {
+  const maxHeight = rectangleGeometry._surfaceHeight;
+  const minHeight = rectangleGeometry._extrudedHeight;
+  const ellipsoid = rectangleGeometry._ellipsoid;
+  const geo = constructRectangle(rectangleGeometry, computedOptions);
+  const height = computedOptions.height;
+  const width = computedOptions.width;
+  const topPositions = PolygonPipeline_default.scaleToGeodeticHeight(
+    geo.attributes.position.values,
+    maxHeight,
+    ellipsoid,
+    false
+  );
+  let length = topPositions.length;
+  const positions = new Float64Array(length * 2);
+  positions.set(topPositions);
+  const bottomPositions = PolygonPipeline_default.scaleToGeodeticHeight(
+    geo.attributes.position.values,
+    minHeight,
+    ellipsoid
+  );
+  positions.set(bottomPositions, length);
+  geo.attributes.position.values = positions;
+  const northCap = computedOptions.northCap;
+  const southCap = computedOptions.southCap;
+  let corners = 4;
+  if (northCap) {
+    corners -= 1;
+  }
+  if (southCap) {
+    corners -= 1;
+  }
+  const indicesSize = (positions.length / 3 + corners) * 2;
+  const indices = IndexDatatype_default.createTypedArray(
+    positions.length / 3,
+    indicesSize
+  );
+  length = positions.length / 6;
+  let index = 0;
+  for (let i = 0; i < length - 1; i++) {
+    indices[index++] = i;
+    indices[index++] = i + 1;
+    indices[index++] = i + length;
+    indices[index++] = i + length + 1;
+  }
+  indices[index++] = length - 1;
+  indices[index++] = 0;
+  indices[index++] = length + length - 1;
+  indices[index++] = length;
+  indices[index++] = 0;
+  indices[index++] = length;
+  let bottomCorner;
+  if (northCap) {
+    bottomCorner = height - 1;
+  } else {
+    const topRightCorner = width - 1;
+    indices[index++] = topRightCorner;
+    indices[index++] = topRightCorner + length;
+    bottomCorner = width + height - 2;
+  }
+  indices[index++] = bottomCorner;
+  indices[index++] = bottomCorner + length;
+  if (!southCap) {
+    const bottomLeftCorner = width + bottomCorner - 1;
+    indices[index++] = bottomLeftCorner;
+    indices[index] = bottomLeftCorner + length;
+  }
+  geo.indices = indices;
+  return geo;
+}
+function RectangleOutlineGeometry(options) {
+  options = options ?? Frozen_default.EMPTY_OBJECT;
+  const rectangle = options.rectangle;
+  const granularity = options.granularity ?? Math_default.RADIANS_PER_DEGREE;
+  const ellipsoid = options.ellipsoid ?? Ellipsoid_default.default;
+  const rotation = options.rotation ?? 0;
+  if (!defined_default(rectangle)) {
+    throw new DeveloperError_default("rectangle is required.");
+  }
+  Rectangle_default._validate(rectangle);
+  if (rectangle.north < rectangle.south) {
+    throw new DeveloperError_default(
+      "options.rectangle.north must be greater than options.rectangle.south"
+    );
+  }
+  const height = options.height ?? 0;
+  const extrudedHeight = options.extrudedHeight ?? height;
+  this._rectangle = Rectangle_default.clone(rectangle);
+  this._granularity = granularity;
+  this._ellipsoid = ellipsoid;
+  this._surfaceHeight = Math.max(height, extrudedHeight);
+  this._rotation = rotation;
+  this._extrudedHeight = Math.min(height, extrudedHeight);
+  this._offsetAttribute = options.offsetAttribute;
+  this._workerName = "createRectangleOutlineGeometry";
+}
+RectangleOutlineGeometry.packedLength = Rectangle_default.packedLength + Ellipsoid_default.packedLength + 5;
+RectangleOutlineGeometry.pack = function(value, array, startingIndex) {
+  if (!defined_default(value)) {
+    throw new DeveloperError_default("value is required");
+  }
+  if (!defined_default(array)) {
+    throw new DeveloperError_default("array is required");
+  }
+  startingIndex = startingIndex ?? 0;
+  Rectangle_default.pack(value._rectangle, array, startingIndex);
+  startingIndex += Rectangle_default.packedLength;
+  Ellipsoid_default.pack(value._ellipsoid, array, startingIndex);
+  startingIndex += Ellipsoid_default.packedLength;
+  array[startingIndex++] = value._granularity;
+  array[startingIndex++] = value._surfaceHeight;
+  array[startingIndex++] = value._rotation;
+  array[startingIndex++] = value._extrudedHeight;
+  array[startingIndex] = value._offsetAttribute ?? -1;
+  return array;
+};
+var scratchRectangle = new Rectangle_default();
+var scratchEllipsoid = Ellipsoid_default.clone(Ellipsoid_default.UNIT_SPHERE);
+var scratchOptions = {
+  rectangle: scratchRectangle,
+  ellipsoid: scratchEllipsoid,
+  granularity: void 0,
+  height: void 0,
+  rotation: void 0,
+  extrudedHeight: void 0,
+  offsetAttribute: void 0
+};
+RectangleOutlineGeometry.unpack = function(array, startingIndex, result) {
+  if (!defined_default(array)) {
+    throw new DeveloperError_default("array is required");
+  }
+  startingIndex = startingIndex ?? 0;
+  const rectangle = Rectangle_default.unpack(array, startingIndex, scratchRectangle);
+  startingIndex += Rectangle_default.packedLength;
+  const ellipsoid = Ellipsoid_default.unpack(array, startingIndex, scratchEllipsoid);
+  startingIndex += Ellipsoid_default.packedLength;
+  const granularity = array[startingIndex++];
+  const height = array[startingIndex++];
+  const rotation = array[startingIndex++];
+  const extrudedHeight = array[startingIndex++];
+  const offsetAttribute = array[startingIndex];
+  if (!defined_default(result)) {
+    scratchOptions.granularity = granularity;
+    scratchOptions.height = height;
+    scratchOptions.rotation = rotation;
+    scratchOptions.extrudedHeight = extrudedHeight;
+    scratchOptions.offsetAttribute = offsetAttribute === -1 ? void 0 : offsetAttribute;
+    return new RectangleOutlineGeometry(scratchOptions);
+  }
+  result._rectangle = Rectangle_default.clone(rectangle, result._rectangle);
+  result._ellipsoid = Ellipsoid_default.clone(ellipsoid, result._ellipsoid);
+  result._surfaceHeight = height;
+  result._rotation = rotation;
+  result._extrudedHeight = extrudedHeight;
+  result._offsetAttribute = offsetAttribute === -1 ? void 0 : offsetAttribute;
+  return result;
+};
+var nwScratch = new Cartographic_default();
+RectangleOutlineGeometry.createGeometry = function(rectangleGeometry) {
+  const rectangle = rectangleGeometry._rectangle;
+  const ellipsoid = rectangleGeometry._ellipsoid;
+  const computedOptions = RectangleGeometryLibrary_default.computeOptions(
+    rectangle,
+    rectangleGeometry._granularity,
+    rectangleGeometry._rotation,
+    0,
+    rectangleScratch,
+    nwScratch
+  );
+  let geometry;
+  let boundingSphere;
+  if (Math_default.equalsEpsilon(
+    rectangle.north,
+    rectangle.south,
+    Math_default.EPSILON10
+  ) || Math_default.equalsEpsilon(
+    rectangle.east,
+    rectangle.west,
+    Math_default.EPSILON10
+  )) {
+    return void 0;
+  }
+  const surfaceHeight = rectangleGeometry._surfaceHeight;
+  const extrudedHeight = rectangleGeometry._extrudedHeight;
+  const extrude = !Math_default.equalsEpsilon(
+    surfaceHeight,
+    extrudedHeight,
+    0,
+    Math_default.EPSILON2
+  );
+  let offsetValue;
+  if (extrude) {
+    geometry = constructExtrudedRectangle(rectangleGeometry, computedOptions);
+    if (defined_default(rectangleGeometry._offsetAttribute)) {
+      const size = geometry.attributes.position.values.length / 3;
+      let offsetAttribute = new Uint8Array(size);
+      if (rectangleGeometry._offsetAttribute === GeometryOffsetAttribute_default.TOP) {
+        offsetAttribute = offsetAttribute.fill(1, 0, size / 2);
+      } else {
+        offsetValue = rectangleGeometry._offsetAttribute === GeometryOffsetAttribute_default.NONE ? 0 : 1;
+        offsetAttribute = offsetAttribute.fill(offsetValue);
+      }
+      geometry.attributes.applyOffset = new GeometryAttribute_default({
+        componentDatatype: ComponentDatatype_default.UNSIGNED_BYTE,
+        componentsPerAttribute: 1,
+        values: offsetAttribute
+      });
+    }
+    const topBS = BoundingSphere_default.fromRectangle3D(
+      rectangle,
+      ellipsoid,
+      surfaceHeight,
+      topBoundingSphere
+    );
+    const bottomBS = BoundingSphere_default.fromRectangle3D(
+      rectangle,
+      ellipsoid,
+      extrudedHeight,
+      bottomBoundingSphere
+    );
+    boundingSphere = BoundingSphere_default.union(topBS, bottomBS);
+  } else {
+    geometry = constructRectangle(rectangleGeometry, computedOptions);
+    geometry.attributes.position.values = PolygonPipeline_default.scaleToGeodeticHeight(
+      geometry.attributes.position.values,
+      surfaceHeight,
+      ellipsoid,
+      false
+    );
+    if (defined_default(rectangleGeometry._offsetAttribute)) {
+      const length = geometry.attributes.position.values.length;
+      offsetValue = rectangleGeometry._offsetAttribute === GeometryOffsetAttribute_default.NONE ? 0 : 1;
+      const applyOffset = new Uint8Array(length / 3).fill(offsetValue);
+      geometry.attributes.applyOffset = new GeometryAttribute_default({
+        componentDatatype: ComponentDatatype_default.UNSIGNED_BYTE,
+        componentsPerAttribute: 1,
+        values: applyOffset
+      });
+    }
+    boundingSphere = BoundingSphere_default.fromRectangle3D(
+      rectangle,
+      ellipsoid,
+      surfaceHeight
+    );
+  }
+  return new Geometry_default({
+    attributes: geometry.attributes,
+    indices: geometry.indices,
+    primitiveType: PrimitiveType_default.LINES,
+    boundingSphere,
+    offsetAttribute: rectangleGeometry._offsetAttribute
+  });
+};
+var RectangleOutlineGeometry_default = RectangleOutlineGeometry;
+
+// packages/engine/Source/Workers/createRectangleOutlineGeometry.js
+function createRectangleOutlineGeometry(rectangleGeometry, offset) {
+  if (defined_default(offset)) {
+    rectangleGeometry = RectangleOutlineGeometry_default.unpack(
+      rectangleGeometry,
+      offset
+    );
+  }
+  rectangleGeometry._ellipsoid = Ellipsoid_default.clone(rectangleGeometry._ellipsoid);
+  rectangleGeometry._rectangle = Rectangle_default.clone(rectangleGeometry._rectangle);
+  return RectangleOutlineGeometry_default.createGeometry(rectangleGeometry);
+}
+var createRectangleOutlineGeometry_default = createRectangleOutlineGeometry;
+export {
+  createRectangleOutlineGeometry_default as default
+};