@reekon-tools/boldr-cad 0.1.0 → 1.0.0

package/dist/model/types.d.ts

@@ -6,6 +6,8 @@ export interface Pt extends XY {
     fixed?: boolean;
     origin?: boolean;
     datum?: boolean;
+    /** on a wall face: a point the plan sets (a corner of the wall, of a door or window) — fixed, kept in step with the plan */
+    anchor?: boolean;
 }
 export type LineKind = 'line' | 'wall';
 export interface Line {
@@ -16,6 +18,10 @@ export interface Line {
     thick: number;
     /** wall height, inches; unset = the default wall height in Settings */
     height?: number;
+    /** on a wall face: an edge the plan sets (the floor, the ceiling, the wall's ends, a door's or window's sides) */
+    anchor?: boolean;
+    /** on a wall face: an edge of this cabinet */
+    cab?: string;
 }
 /** Curves can be walls too (kind 'wall', with a thickness), like straight lines. */
 export interface Circle {
@@ -53,6 +59,17 @@ export interface Constraint {
     line?: string | null;
     /** dist: aligned, horizontal or vertical */
     kind?: 'al' | 'h' | 'v';
+    /**
+     * dist, a wall's length: measured along this face of it — +1 the face to the left of its line's A → B, −1 the right
+     * — corner to corner, as a tape measure along it reads. diam, a curved wall's: across its outer face (+1) or its
+     * inner face (−1). Unset, its centreline.
+     */
+    face?: 1 | -1;
+    /**
+     * pldist between two walls (`l`, and `l2`, the wall `p` is on): which face of each it's measured from — +1 the face
+     * toward the other, −1 the far one, 0 the centreline; unset, both centrelines.
+     */
+    faces?: [number, number];
     value?: number;
     /** false = reference dimension (shown in parentheses, never drives geometry) */
     driving?: boolean;
@@ -60,10 +77,32 @@ export interface Constraint {
     off?: number;
     /** diameters: direction of the diameter line, radians (default 60°) */
     ang?: number;
+    /** diameters: shown, entered and measured as a radius (a fillet's) — `value` is still the diameter */
+    rad?: boolean;
     sign?: number;
     layer?: 'print';
-    /** the BOLDR measurement this driving dimension's value is kept in (set by the host's measurement link) */
+    /**
+     * the drawing's own BOLDR measurement this driving dimension's value is kept in — made automatically by drawings
+     * from before Save to group, and still kept in step for them; no new ones are made
+     */
     measurementId?: string;
+    /**
+     * a job measurement this driving dimension shows (picked to drive a line, or saved to the group): the job's, never the
+     * drawing's — its value comes from the job, and a new one is written back only once the person says so. Never set
+     * together with measurementId.
+     */
+    measurementRef?: LinkTarget;
+    /**
+     * the host's own record of the laser reading that set this dimension's value (opaque, kept as JSON), handed back when
+     * it's saved to the group so the measurement is recorded as the tool's; dropped when the value changes any other way
+     */
+    capture?: unknown;
+    /** a default nobody measured (a new cabinet's size): it drives the drawing but isn't kept as a measurement until it's entered */
+    auto?: boolean;
+    /** on a wall face: drawn by the wall view (a cabinet's shape and size, the dimensions along the floor and beside things), not as a plan dimension or badge */
+    elev?: boolean;
+    /** on a wall face: kept by the plan (a door's or window's shape there, and where the plan locks it), never edited */
+    anchor?: boolean;
 }
 /** A room: its corner points, and (for loops with curves) the line or arc id after each corner. */
 export interface Room {
@@ -107,6 +146,11 @@ export interface Opening {
     /** centre, inches along the line from its start point */
     at: number;
     w: number;
+    /**
+     * the width was entered (typed or lasered); until then it's the standard size, shown grey. Unset on drawings from
+     * before this was kept: a width other than the standard one was entered.
+     */
+    wSet?: boolean;
     type: 'door' | 'window';
     flip: boolean;
     dims?: OpeningDim[];
@@ -119,7 +163,61 @@ export interface Opening {
     /** the sill height was entered (keypad / laser): it's locked — the window can't be dragged up or down until it's freed */
     sillLocked?: boolean;
 }
-export type NoteType = 'pen' | 'arrow' | 'cloud' | 'text';
+/**
+ * line … ellipse: markup shapes drawn by a drag, kept as two corners like a cloud (a line: its two ends, like an arrow).
+ * link: a tile for one of the job's files (see LinkTarget), at x, y, with an optional leader. (A measurement comes into a
+ *   drawing only as the dimension it drives; a measurement tile from before that rule still draws, its value live.)
+ */
+export type NoteType = 'pen' | 'arrow' | 'cloud' | 'text' | 'line' | 'rect' | 'triangle' | 'ellipse' | 'link';
+/**
+ * One of the job's files or measurements, as a drawing points at it. The host finds it by its group and id within the
+ * job it's open in — never by `path` — so a copied or moved job's drawings still find theirs.
+ */
+export interface LinkTarget {
+    kind: 'file' | 'measurement';
+    id: string;
+    /** the group it's in (any group of the job) */
+    groupId: string;
+    /** a form group's column (the host finds the measurement in it) */
+    columnId?: string;
+    /** the host's own reference, handed back as it was */
+    path?: string;
+    /**
+     * What it was when it was linked: shown until the host says what it is now, offline, in exports, and once it's been
+     * removed. Never refreshed by itself (a drawing opened would count as edited).
+     */
+    name?: string;
+    groupName?: string;
+    /** the host's tag for the kind of file (its icon) */
+    fileType?: string;
+    /** a measurement's kind: 'length', 'angle', or the host's own */
+    mkind?: string;
+    /** a measurement's value: µm for a length, degrees for an angle */
+    value?: number;
+    /** that value as the host writes it */
+    text?: string;
+}
+/**
+ * What a link is now, as the host says (LinkTarget has what it was when it was linked). A file's kind, for its icon:
+ * 'photo', 'pdf', 'document', 'note', 'calculator', 'label', 'drawing' or anything else (a plain page).
+ */
+export interface LinkInfo {
+    /** false once the host has looked and it's gone — never while it's still loading */
+    exists: boolean;
+    name?: string;
+    groupName?: string;
+    fileType?: string;
+    /** a small picture of it: a URL or a data URL */
+    thumbUrl?: string;
+    mkind?: string;
+    /** µm for a length, degrees for an angle */
+    value?: number;
+    /** the value as the host writes it */
+    text?: string;
+    /** whether it can be opened from the drawing, and its measurement changed from it (unset: yes) */
+    canOpen?: boolean;
+    canEdit?: boolean;
+}
 export interface Note {
     id: string;
     type: NoteType;
@@ -128,10 +226,33 @@ export interface Note {
     y?: number;
     text?: string;
     color: string;
+    /**
+     * text: how tall its letters are on the drawing, in inches (unset: 5") — fixed to the drawing, so it zooms with it as
+     * the lines do; the box, padding and corners grow with it. Set by the note's corner handles or the markup panel.
+     * link: the tile's side on the drawing, inches (set as it's placed: a tile's size on the screen at that zoom).
+     */
+    ts?: number;
+    /** text, from before `ts`: a size in screen pixels (14 px read as 5", as the PDF has always printed it) */
+    size?: number;
+    /** stroke width in screen pixels (unset: 3, a cloud 2.5); not for text */
+    width?: number;
+    /** dashed or dotted (unset: solid); a note's box takes it too */
+    style?: 'dash' | 'dot';
+    /** pen strokes and arrows: how each end finishes (unset: round, an arrow's end an arrowhead) */
+    startCap?: NoteCap;
+    cap?: NoteCap;
+    /** link: what it's a tile for (x, y is the tile's centre, `ts` its side on the drawing, inches) */
+    link?: LinkTarget;
+    /**
+     * link: where its leader points, plan inches — the leader runs from the tile's edge to here, so `cap` is the end at
+     * what it points to. Unset: no leader. Its look is the note's color, width, style and caps.
+     */
+    leader?: [number, number];
 }
+export type NoteCap = 'butt' | 'round' | 'arrow';
 /**
- * A line drawn on a wall elevation (layout marks, guides). a / b are [s, z]: s inches along the wall from its
- * start point A (so it survives flipping the view), z inches up from the floor.
+ * A line drawn on a wall elevation by earlier versions (layout marks, guides). a / b are [s, z]: s inches along the
+ * wall from its start point A, z inches up from the floor. Read only to move it into the wall's face (WallFace).
  */
 export interface ElevLine {
     id: string;
@@ -139,6 +260,40 @@ export interface ElevLine {
     b: [number, number];
     guide?: boolean;
 }
+/**
+ * A cabinet on a wall face: a rectangle of four face points — bottom-left, bottom-right, top-right and top-left as
+ * seen — kept square by constraints. w, h: its width and height constraints.
+ */
+export interface Cabinet {
+    bl: string;
+    br: string;
+    tr: string;
+    tl: string;
+    w?: string;
+    h?: string;
+    /** inches from the wall face out into the room */
+    depth: number;
+    /** the depth was entered (not the standard one) */
+    depthSet?: boolean;
+    label?: string;
+}
+/**
+ * What's drawn on one face of a wall (one side of it, as its elevation shows it): a sketch of its own, edited and
+ * solved like the plan. x runs across the wall as seen from that side, y up from the floor. The plan's corners,
+ * floor, ceiling and doors and windows are in it as anchors (fixed points and edges, ids starting "@"), kept in step
+ * with the plan, so what's drawn can be snapped, constrained and dimensioned to them.
+ */
+export interface WallFace extends Sketch {
+    cabs: Record<string, Cabinet>;
+    /**
+     * Where the face's corners were when what's drawn on it was last placed: across as seen, and each in the plan. When
+     * one end of the wall moves, what's drawn keeps its place from the end that moved less (it stays where it is).
+     */
+    wall?: {
+        u: [number, number];
+        ends: [[number, number], [number, number]];
+    };
+}
 export interface Sketch {
     points: Record<string, Pt>;
     lines: Record<string, Line>;
@@ -151,11 +306,15 @@ export interface Sketch {
     seq: {
         room: number;
     };
-    /** lines drawn on wall elevations, per wall face: key "<wall line id>|<side>" (side 1: left of A → B, -1: right) */
+    /** what's drawn on wall elevations, per wall face: key "<wall line id>|<side>" (side 1: left of A → B, -1: right) */
+    faces?: Record<string, WallFace>;
+    /** earlier versions' lines on wall elevations (same keys): moved into `faces` when the drawing loads */
     elev?: Record<string, ElevLine[]>;
 }
 /** Photo or plan traced under the drawing. (x, y) is its top-left corner in world inches. */
 export interface Underlay {
+    /** which of the page's images (unique on its page) */
+    id: string;
     src: string;
     x: number;
     y: number;
@@ -163,7 +322,9 @@ export interface Underlay {
     /** height in inches; when missing, it follows the image's own aspect ratio */
     h?: number;
     opacity?: number;
-    /** locked images can't be moved or resized (they still show, and can be unlocked) */
+    /** turned about its middle, degrees clockwise as it's seen (unset: upright) — x, y, w, h are the box before it's turned */
+    rot?: number;
+    /** locked images can't be moved, resized or turned (they still show, and can be unlocked) */
     locked?: boolean;
 }
 export interface View {
@@ -171,11 +332,12 @@ export interface View {
     cy: number;
     s: number;
 }
+/** underlays: the page's photos and plans, drawn in order (the last on top) */
 export interface Page {
     id: string;
     name: string;
     sk: Sketch;
-    underlay: Underlay | null;
+    underlays: Underlay[];
     view: View | null;
     _fit?: boolean;
 }
@@ -195,7 +357,10 @@ export interface Analysis {
     ok: boolean;
 }
 /** 'odim': a door/window position dimension, id "<opening id>|<part>" (part 'a' / 'b' = distance to a wall end, 'd:<id>' = a placed one). */
-export type SelType = 'point' | 'line' | 'circle' | 'arc' | 'cons' | 'dim' | 'room' | 'opening' | 'odim' | 'note' | 'underlay';
+/** On a wall face, also 'cab' (a cabinet) and 'elev' (one of the wall view's dimension chips; id: what it measures, as JSON). */
+/** 'oanchor': one end of a door or window in the plan, id "<opening>|s0" or "<opening>|s1" */
+/** 'wface': one edge (face) of a wall, id '<line id>|1' (the face to the left of its A → B) or '<line id>|-1' (the right) */
+export type SelType = 'point' | 'line' | 'circle' | 'arc' | 'cons' | 'dim' | 'room' | 'opening' | 'odim' | 'oanchor' | 'note' | 'underlay' | 'cab' | 'elev' | 'wface';
 export interface SelItem {
     type: SelType;
     id: string;

package/dist/model/wallfaces.d.ts

@@ -6,7 +6,39 @@ export interface WallFace {
     /** neighbouring walls on this side, cut where they meet the face: their extent in s */
     strips: [number, number][];
 }
+/**
+ * A wall meeting one end of another (not a guide), and its thickness: a straight one, by the point it runs out to
+ * (`far`); a curved one, by its centre and which way it leaves the corner (`ccw`: counter-clockwise, from its start).
+ */
+export interface FaceEnd {
+    thick: number;
+    far?: string;
+    arc?: {
+        c: string;
+        ccw: boolean;
+    };
+}
+/** The walls meeting each end of a wall. */
+export interface FaceEnds {
+    a: FaceEnd[];
+    b: FaceEnd[];
+}
+/**
+ * The walls meeting each end of a wall: those it shares the point with, and those its end sits on partway along (a T —
+ * a wall run up to the middle of another). One partway along runs out both ways from the end, as if it were split
+ * there, so the faces either side of the end stop at its near face. (A curved wall's end on its centreline, as snapping
+ * puts it: its radius is taken from there.)
+ */
+export declare function faceEnds(sk: Sketch, lid: string): FaceEnds;
+/**
+ * One face of a straight wall from A to B, `t` thick: `side` +1 the face to the left of A → B, −1 the right. The
+ * walls at its ends (`ends`) and every point are looked up by `pt` — the sketch's own, or a solve's trial positions
+ * (a face dimension is solved through this). Null if A and B are one point.
+ */
+export declare function faceSpan(pt: (id: string) => XY, A: XY, B: XY, t: number, side: 1 | -1, ends: FaceEnds): WallFace | null;
 /** One face of straight wall `lid`: `side` +1 is the face to the left of A → B, −1 the right. Null if it isn't a usable line. */
 export declare function wallFace(sk: Sketch, lid: string, side: 1 | -1): WallFace | null;
+/** How long one face of a wall is, corner to corner (what a tape measure along it reads); its centreline if it's not a wall. */
+export declare function faceLength(sk: Sketch, lid: string, side: 1 | -1): number;
 /** A face corner as a point: on the face (half the wall's thickness off the centerline) at the corner. */
 export declare function faceCorner(sk: Sketch, lid: string, side: 1 | -1, end: 'a' | 'b'): XY | null;

package/dist/model/wallfaces.js

@@ -1,17 +1,83 @@
 import { hyp } from './geom';
-/** One face of straight wall `lid`: `side` +1 is the face to the left of A → B, −1 the right. Null if it isn't a usable line. */
-export function wallFace(sk, lid, side) {
-    const l = sk.lines[lid];
-    if (!l)
-        return null;
-    const A = sk.points[l.a], B = sk.points[l.b];
+/** How close (inches) counts as the same place, for a wall's end on another wall. */
+const ON = 1e-3;
+/**
+ * The walls meeting each end of a wall: those it shares the point with, and those its end sits on partway along (a T —
+ * a wall run up to the middle of another). One partway along runs out both ways from the end, as if it were split
+ * there, so the faces either side of the end stop at its near face. (A curved wall's end on its centreline, as snapping
+ * puts it: its radius is taken from there.)
+ */
+export function faceEnds(sk, lid) {
+    const l = sk.lines[lid], out = { a: [], b: [] };
+    for (const end of ['a', 'b']) {
+        const pid = l[end], P = sk.points[pid], list = out[end];
+        for (const id in sk.lines) {
+            const n = sk.lines[id];
+            if (id === lid || n.kind !== 'wall' || n.constr)
+                continue;
+            if (n.a === pid || n.b === pid)
+                list.push({ far: n.a === pid ? n.b : n.a, thick: n.thick });
+            else if (P && alongWall(sk, n, P))
+                list.push({ far: n.a, thick: n.thick }, { far: n.b, thick: n.thick });
+        }
+        // (an arc runs counter-clockwise from its start, a, to its end, b; one drawn as a wall without a thickness is 4½")
+        for (const id in sk.arcs) {
+            const n = sk.arcs[id], t = n.thick || 4.5;
+            if (n.kind !== 'wall' || n.constr)
+                continue;
+            if (n.a === pid || n.b === pid) {
+                list.push({ arc: { c: n.c, ccw: n.a === pid }, thick: t });
+                continue;
+            }
+            const C = sk.points[n.c], S = sk.points[n.a];
+            if (P && C && S && alongCurve(sk, n.c, hyp(S.x - C.x, S.y - C.y), t, P, n))
+                list.push({ arc: { c: n.c, ccw: true }, thick: t }, { arc: { c: n.c, ccw: false }, thick: t });
+        }
+        for (const id in sk.circles) {
+            const n = sk.circles[id], t = n.thick || 4.5;
+            if (n.kind !== 'wall' || n.constr)
+                continue;
+            if (P && alongCurve(sk, n.c, n.r, t, P))
+                list.push({ arc: { c: n.c, ccw: true }, thick: t }, { arc: { c: n.c, ccw: false }, thick: t });
+        }
+    }
+    return out;
+}
+/** Whether point P is on straight wall `n` partway along it (within its thickness, short of its ends). */
+function alongWall(sk, n, P) {
+    const A = sk.points[n.a], B = sk.points[n.b];
     if (!A || !B)
-        return null;
+        return false;
+    const L = hyp(B.x - A.x, B.y - A.y);
+    if (L < ON)
+        return false;
+    const s = ((P.x - A.x) * (B.x - A.x) + (P.y - A.y) * (B.y - A.y)) / L, off = Math.abs((B.x - A.x) * (P.y - A.y) - (B.y - A.y) * (P.x - A.x)) / L;
+    return s > ON && s < L - ON && off <= n.thick / 2 + ON;
+}
+/** Whether point P is on a curved wall (centre `c`, radius `r`, `t` thick) partway along it — for an arc, short of its ends. */
+function alongCurve(sk, c, r, t, P, arc) {
+    const C = sk.points[c];
+    if (!C || r < ON || Math.abs(hyp(P.x - C.x, P.y - C.y) - r) > t / 2 + ON)
+        return false;
+    if (!arc)
+        return true;
+    const A = sk.points[arc.a], B = sk.points[arc.b];
+    if (!A || !B)
+        return false;
+    const turn = (v) => ((v % (2 * Math.PI)) + 2 * Math.PI) % (2 * Math.PI);
+    const t0 = Math.atan2(A.y - C.y, A.x - C.x), sweep = turn(Math.atan2(B.y - C.y, B.x - C.x) - t0), at = turn(Math.atan2(P.y - C.y, P.x - C.x) - t0);
+    return at * r > ON && at < sweep && (sweep - at) * r > ON;
+}
+/**
+ * One face of a straight wall from A to B, `t` thick: `side` +1 the face to the left of A → B, −1 the right. The
+ * walls at its ends (`ends`) and every point are looked up by `pt` — the sketch's own, or a solve's trial positions
+ * (a face dimension is solved through this). Null if A and B are one point.
+ */
+export function faceSpan(pt, A, B, t, side, ends) {
     const L = hyp(B.x - A.x, B.y - A.y);
     if (L < 1e-6)
         return null;
     const ux = (B.x - A.x) / L, uy = (B.y - A.y) / L, nx = -uy * side, ny = ux * side;
-    const t = l.kind === 'wall' ? l.thick : 0;
     const F = { x: A.x + nx * (t / 2), y: A.y + ny * (t / 2) };
     /** Where the face line (F + û s) crosses each face of a neighbouring wall leaving `P` in direction d. */
     const crossings = (P, d, tn) => {
@@ -25,20 +91,52 @@ export function wallFace(sk, lid, side) {
         const s1 = at(tn / 2), s2 = at(-tn / 2);
         return [Math.min(s1, s2), Math.max(s1, s2)];
     };
+    /**
+     * Where the face line crosses each face of a curved wall leaving `P` in direction d (its tangent there) around centre
+     * `C`: the circles half its thickness either side of it, each where it crosses nearest the corner (`sP`, s at P). A
+     * face the line misses is taken along the tangent, as a straight wall's would be.
+     */
+    const arcCrossings = (P, C, d, tn, sP, ccw) => {
+        const den = ux * d[1] - uy * d[0];
+        if (Math.abs(den) < 0.05)
+            return null; // (it carries on in line with the face, as a fillet does: no corner)
+        const R = hyp(P.x - C.x, P.y - C.y), fx = F.x - C.x, fy = F.y - C.y, b = ux * fx + uy * fy;
+        /** Along the tangent: where the face line crosses the line k to its left (a straight wall's face). */
+        const along = (k) => { const Q = { x: P.x - d[1] * k, y: P.y + d[0] * k }; return ((Q.x - F.x) * d[1] - (Q.y - F.y) * d[0]) / den; };
+        /** Where the face line crosses the circle of radius rho (k: the same face along the tangent, if it misses it). */
+        const at = (rho, k) => {
+            const disc = b * b - (fx * fx + fy * fy - rho * rho);
+            if (rho <= 0 || disc < 0)
+                return along(k);
+            const r1 = -b - Math.sqrt(disc), r2 = -b + Math.sqrt(disc);
+            return Math.abs(r1 - sP) <= Math.abs(r2 - sP) ? r1 : r2;
+        };
+        // (left of the tangent is toward the centre for an arc leaving counter-clockwise: its inner face)
+        const s1 = at(R + tn / 2, ccw ? -tn / 2 : tn / 2), s2 = at(R - tn / 2, ccw ? tn / 2 : -tn / 2);
+        return [Math.min(s1, s2), Math.max(s1, s2)];
+    };
     const strips = [];
     /** One end of the face: s of the corner, collecting the neighbouring walls cut on this side. */
-    const end = (pid, atStart) => {
+    const end = (P, walls, atStart) => {
         let toward = null, away = null;
-        const P = sk.points[pid];
-        for (const id in sk.lines) {
-            const n = sk.lines[id];
-            if (id === lid || n.kind !== 'wall' || n.constr || (n.a !== pid && n.b !== pid))
-                continue;
-            const Q = sk.points[n.a === pid ? n.b : n.a], Ln = hyp(Q.x - P.x, Q.y - P.y);
-            if (Ln < 1e-6)
-                continue;
-            const d = [(Q.x - P.x) / Ln, (Q.y - P.y) / Ln];
-            const c = crossings(P, d, n.thick);
+        for (const n of walls) {
+            let d, c;
+            if (n.arc) {
+                // a curved wall: it leaves the corner along its tangent there
+                const C = pt(n.arc.c), R = hyp(P.x - C.x, P.y - C.y);
+                if (R < 1e-6)
+                    continue;
+                const k = n.arc.ccw ? 1 : -1;
+                d = [(-(P.y - C.y) / R) * k, ((P.x - C.x) / R) * k];
+                c = arcCrossings(P, C, d, n.thick, atStart ? 0 : L, n.arc.ccw);
+            }
+            else {
+                const Q = pt(n.far), Ln = hyp(Q.x - P.x, Q.y - P.y);
+                if (Ln < 1e-6)
+                    continue;
+                d = [(Q.x - P.x) / Ln, (Q.y - P.y) / Ln];
+                c = crossings(P, d, n.thick);
+            }
             if (!c)
                 continue;
             if (d[0] * nx + d[1] * ny > 0) {
@@ -55,7 +153,22 @@ export function wallFace(sk, lid, side) {
         }
         return toward ?? away ?? (atStart ? 0 : L);
     };
-    return { s0: end(l.a, true), s1: end(l.b, false), strips };
+    return { s0: end(A, ends.a, true), s1: end(B, ends.b, false), strips };
+}
+/** One face of straight wall `lid`: `side` +1 is the face to the left of A → B, −1 the right. Null if it isn't a usable line. */
+export function wallFace(sk, lid, side) {
+    const l = sk.lines[lid];
+    if (!l)
+        return null;
+    const A = sk.points[l.a], B = sk.points[l.b];
+    if (!A || !B)
+        return null;
+    return faceSpan(id => sk.points[id], A, B, l.kind === 'wall' ? l.thick : 0, side, faceEnds(sk, lid));
+}
+/** How long one face of a wall is, corner to corner (what a tape measure along it reads); its centreline if it's not a wall. */
+export function faceLength(sk, lid, side) {
+    const f = wallFace(sk, lid, side);
+    return f ? f.s1 - f.s0 : 0;
 }
 /** A face corner as a point: on the face (half the wall's thickness off the centerline) at the corner. */
 export function faceCorner(sk, lid, side, end) {

package/dist/model/wallfaces.js.map

@@ -1 +1 @@
-{"version":3,"file":"wallfaces.js","sourceRoot":"","sources":["../../src/model/wallfaces.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,GAAG,EAAE,MAAM,QAAQ,CAAC;AAkB7B,iIAAiI;AACjI,MAAM,UAAU,QAAQ,CAAC,EAAU,EAAE,GAAW,EAAE,IAAY;IAC5D,MAAM,CAAC,GAAG,EAAE,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC;IACxB,IAAI,CAAC,CAAC;QAAE,OAAO,IAAI,CAAC;IACpB,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAC7C,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC;QAAE,OAAO,IAAI,CAAC;IAC1B,MAAM,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;IACpC,IAAI,CAAC,GAAG,IAAI;QAAE,OAAO,IAAI,CAAC;IAC1B,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,EAAE,GAAG,CAAC,EAAE,GAAG,IAAI,EAAE,EAAE,GAAG,EAAE,GAAG,IAAI,CAAC;IAClF,MAAM,CAAC,GAAG,CAAC,CAAC,IAAI,KAAK,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;IAC1C,MAAM,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC;IAE3D,yGAAyG;IACzG,MAAM,SAAS,GAAG,CAAC,CAAK,EAAE,CAAmB,EAAE,EAAU,EAA2B,EAAE;QACpF,MAAM,GAAG,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;QAClC,IAAI,IAAI,CAAC,GAAG,CAAC,GAAG,CAAC,GAAG,IAAI;YAAE,OAAO,IAAI,CAAC,CAAC,8BAA8B;QACrE,MAAM,EAAE,GAAG,CAAC,CAAS,EAAE,EAAE;YACvB,MAAM,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC;YACnD,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC;QACzD,CAAC,CAAC;QACF,MAAM,EAAE,GAAG,EAAE,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QACxC,OAAO,CAAC,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,EAAE,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC;IAC9C,CAAC,CAAC;IACF,MAAM,MAAM,GAAuB,EAAE,CAAC;IACtC,gGAAgG;IAChG,MAAM,GAAG,GAAG,CAAC,GAAW,EAAE,OAAgB,EAAU,EAAE;QACpD,IAAI,MAAM,GAAkB,IAAI,EAAE,IAAI,GAAkB,IAAI,CAAC;QAC7D,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC;QACzB,KAAK,MAAM,EAAE,IAAI,EAAE,CAAC,KAAK,EAAE,CAAC;YAC1B,MAAM,CAAC,GAAG,EAAE,CAAC,KAAK,CAAC,EAAE,CAAC,CAAC;YACvB,IAAI,EAAE,KAAK,GAAG,IAAI,CAAC,CAAC,IAAI,KAAK,MAAM,IAAI,CAAC,CAAC,MAAM,IAAI,CAAC,CAAC,CAAC,CAAC,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC;gBAAE,SAAS;YAC1F,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,EAAE,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;YAC7E,IAAI,EAAE,GAAG,IAAI;gBAAE,SAAS;YACxB,MAAM,CAAC,GAAqB,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC;YACjE,MAAM,CAAC,GAAG,SAAS,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,KAAK,CAAC,CAAC;YACnC,IAAI,CAAC,CAAC;gBAAE,SAAS;YACjB,IAAI,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,EAAE,CAAC;gBAC9B,iGAAiG;gBACjG,MAAM,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC;gBACf,MAAM,CAAC,GAAG,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;gBAChC,MAAM,GAAG,MAAM,IAAI,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC;YACpF,CAAC;iBAAM,CAAC;gBACN,oEAAoE;gBACpE,MAAM,CAAC,GAAG,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;gBAChC,IAAI,GAAG,IAAI,IAAI,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC;YAC5E,CAAC;QACH,CAAC;QACD,OAAO,MAAM,IAAI,IAAI,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAC7C,CAAC,CAAC;IACF,OAAO,EAAE,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,IAAI,CAAC,EAAE,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,KAAK,CAAC,EAAE,MAAM,EAAE,CAAC;AAC7D,CAAC;AAED,0GAA0G;AAC1G,MAAM,UAAU,UAAU,CAAC,EAAU,EAAE,GAAW,EAAE,IAAY,EAAE,GAAc;IAC9E,MAAM,CAAC,GAAG,QAAQ,CAAC,EAAE,EAAE,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC;IACrD,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC;QAAE,OAAO,IAAI,CAAC;IAC1B,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;IAC5E,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,IAAI,KAAK,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,GAAG,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC;IACrH,OAAO,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,GAAG,EAAE,GAAG,IAAI,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,GAAG,EAAE,GAAG,IAAI,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC;AAC1F,CAAC"}
+{"version":3,"file":"wallfaces.js","sourceRoot":"","sources":["../../src/model/wallfaces.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,GAAG,EAAE,MAAM,QAAQ,CAAC;AA0B7B,qFAAqF;AACrF,MAAM,EAAE,GAAG,IAAI,CAAC;AAEhB;;;;;GAKG;AACH,MAAM,UAAU,QAAQ,CAAC,EAAU,EAAE,GAAW;IAC9C,MAAM,CAAC,GAAG,EAAE,CAAC,KAAK,CAAC,GAAG,CAAC,EAAE,GAAG,GAAa,EAAE,CAAC,EAAE,EAAE,EAAE,CAAC,EAAE,EAAE,EAAE,CAAC;IAC1D,KAAK,MAAM,GAAG,IAAI,CAAC,GAAG,EAAE,GAAG,CAAU,EAAE,CAAC;QACtC,MAAM,GAAG,GAAG,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,GAAG,CAAC,EAAE,IAAI,GAAG,GAAG,CAAC,GAAG,CAAC,CAAC;QACxD,KAAK,MAAM,EAAE,IAAI,EAAE,CAAC,KAAK,EAAE,CAAC;YAC1B,MAAM,CAAC,GAAG,EAAE,CAAC,KAAK,CAAC,EAAE,CAAC,CAAC;YACvB,IAAI,EAAE,KAAK,GAAG,IAAI,CAAC,CAAC,IAAI,KAAK,MAAM,IAAI,CAAC,CAAC,MAAM;gBAAE,SAAS;YAC1D,IAAI,CAAC,CAAC,CAAC,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,KAAK,GAAG;gBAAE,IAAI,CAAC,IAAI,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,KAAK,EAAE,CAAC,CAAC,KAAK,EAAE,CAAC,CAAC;iBACvF,IAAI,CAAC,IAAI,SAAS,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC;gBAAE,IAAI,CAAC,IAAI,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,EAAE,KAAK,EAAE,CAAC,CAAC,KAAK,EAAE,EAAE,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,EAAE,KAAK,EAAE,CAAC,CAAC,KAAK,EAAE,CAAC,CAAC;QAC3G,CAAC;QACD,mHAAmH;QACnH,KAAK,MAAM,EAAE,IAAI,EAAE,CAAC,IAAI,EAAE,CAAC;YACzB,MAAM,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,EAAE,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,KAAK,IAAI,GAAG,CAAC;YAC1C,IAAI,CAAC,CAAC,IAAI,KAAK,MAAM,IAAI,CAAC,CAAC,MAAM;gBAAE,SAAS;YAC5C,IAAI,CAAC,CAAC,CAAC,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,KAAK,GAAG,EAAE,CAAC;gBAAC,IAAI,CAAC,IAAI,CAAC,EAAE,GAAG,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,KAAK,GAAG,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE,CAAC,CAAC;gBAAC,SAAS;YAAC,CAAC;YACzG,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;YAC7C,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,IAAI,UAAU,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC;gBAAE,IAAI,CAAC,IAAI,CAAC,EAAE,GAAG,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,IAAI,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE,CAAC,CAAC;QAC7K,CAAC;QACD,KAAK,MAAM,EAAE,IAAI,EAAE,CAAC,OAAO,EAAE,CAAC;YAC5B,MAAM,CAAC,GAAG,EAAE,CAAC,OAAO,CAAC,EAAE,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,KAAK,IAAI,GAAG,CAAC;YAC7C,IAAI,CAAC,CAAC,IAAI,KAAK,MAAM,IAAI,CAAC,CAAC,MAAM;gBAAE,SAAS;YAC5C,IAAI,CAAC,IAAI,UAAU,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC;gBAAE,IAAI,CAAC,IAAI,CAAC,EAAE,GAAG,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,IAAI,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE,EAAE,EAAE,GAAG,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,GAAG,EAAE,KAAK,EAAE,EAAE,KAAK,EAAE,CAAC,EAAE,CAAC,CAAC;QAC1I,CAAC;IACH,CAAC;IACD,OAAO,GAAG,CAAC;AACb,CAAC;AAED,0GAA0G;AAC1G,SAAS,SAAS,CAAC,EAAU,EAAE,CAA0C,EAAE,CAAK;IAC9E,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAC7C,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC;QAAE,OAAO,KAAK,CAAC;IAC3B,MAAM,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;IACpC,IAAI,CAAC,GAAG,EAAE;QAAE,OAAO,KAAK,CAAC;IACzB,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,GAAG,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;IACjJ,OAAO,CAAC,GAAG,EAAE,IAAI,CAAC,GAAG,CAAC,GAAG,EAAE,IAAI,GAAG,IAAI,CAAC,CAAC,KAAK,GAAG,CAAC,GAAG,EAAE,CAAC;AACzD,CAAC;AAED,gIAAgI;AAChI,SAAS,UAAU,CAAC,EAAU,EAAE,CAAS,EAAE,CAAS,EAAE,CAAS,EAAE,CAAK,EAAE,GAA8B;IACpG,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC;IACvB,IAAI,CAAC,CAAC,IAAI,CAAC,GAAG,EAAE,IAAI,IAAI,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,GAAG,EAAE;QAAE,OAAO,KAAK,CAAC;IACvF,IAAI,CAAC,GAAG;QAAE,OAAO,IAAI,CAAC;IACtB,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC;IACjD,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC;QAAE,OAAO,KAAK,CAAC;IAC3B,MAAM,IAAI,GAAG,CAAC,CAAS,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,CAAC,GAAG,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,EAAE,CAAC,CAAC;IAChF,MAAM,EAAE,GAAG,IAAI,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,KAAK,GAAG,IAAI,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,GAAG,IAAI,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC;IACnJ,OAAO,EAAE,GAAG,CAAC,GAAG,EAAE,IAAI,EAAE,GAAG,KAAK,IAAI,CAAC,KAAK,GAAG,EAAE,CAAC,GAAG,CAAC,GAAG,EAAE,CAAC;AAC5D,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,QAAQ,CAAC,EAAsB,EAAE,CAAK,EAAE,CAAK,EAAE,CAAS,EAAE,IAAY,EAAE,IAAc;IACpG,MAAM,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;IACpC,IAAI,CAAC,GAAG,IAAI;QAAE,OAAO,IAAI,CAAC;IAC1B,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,EAAE,GAAG,CAAC,EAAE,GAAG,IAAI,EAAE,EAAE,GAAG,EAAE,GAAG,IAAI,CAAC;IAClF,MAAM,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC;IAE3D,yGAAyG;IACzG,MAAM,SAAS,GAAG,CAAC,CAAK,EAAE,CAAmB,EAAE,EAAU,EAA2B,EAAE;QACpF,MAAM,GAAG,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;QAClC,IAAI,IAAI,CAAC,GAAG,CAAC,GAAG,CAAC,GAAG,IAAI;YAAE,OAAO,IAAI,CAAC,CAAC,8BAA8B;QACrE,MAAM,EAAE,GAAG,CAAC,CAAS,EAAE,EAAE;YACvB,MAAM,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC;YACnD,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC;QACzD,CAAC,CAAC;QACF,MAAM,EAAE,GAAG,EAAE,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QACxC,OAAO,CAAC,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,EAAE,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC;IAC9C,CAAC,CAAC;IACF;;;;OAIG;IACH,MAAM,YAAY,GAAG,CAAC,CAAK,EAAE,CAAK,EAAE,CAAmB,EAAE,EAAU,EAAE,EAAU,EAAE,GAAY,EAA2B,EAAE;QACxH,MAAM,GAAG,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;QAClC,IAAI,IAAI,CAAC,GAAG,CAAC,GAAG,CAAC,GAAG,IAAI;YAAE,OAAO,IAAI,CAAC,CAAC,qEAAqE;QAC5G,MAAM,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,CAAC;QAC3F,sGAAsG;QACtG,MAAM,KAAK,GAAG,CAAC,CAAS,EAAE,EAAE,GAAG,MAAM,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC;QAC7I,kHAAkH;QAClH,MAAM,EAAE,GAAG,CAAC,GAAW,EAAE,CAAS,EAAE,EAAE;YACpC,MAAM,IAAI,GAAG,CAAC,GAAG,CAAC,GAAG,CAAC,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,GAAG,GAAG,GAAG,GAAG,CAAC,CAAC;YACrD,IAAI,GAAG,IAAI,CAAC,IAAI,IAAI,GAAG,CAAC;gBAAE,OAAO,KAAK,CAAC,CAAC,CAAC,CAAC;YAC1C,MAAM,EAAE,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,GAAG,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;YAC3D,OAAO,IAAI,CAAC,GAAG,CAAC,EAAE,GAAG,EAAE,CAAC,IAAI,IAAI,CAAC,GAAG,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;QAC1D,CAAC,CAAC;QACF,kGAAkG;QAClG,MAAM,EAAE,GAAG,EAAE,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,EAAE,GAAG,EAAE,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,CAAC;QAC/F,OAAO,CAAC,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,EAAE,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC;IAC9C,CAAC,CAAC;IACF,MAAM,MAAM,GAAuB,EAAE,CAAC;IACtC,gGAAgG;IAChG,MAAM,GAAG,GAAG,CAAC,CAAK,EAAE,KAAoB,EAAE,OAAgB,EAAU,EAAE;QACpE,IAAI,MAAM,GAAkB,IAAI,EAAE,IAAI,GAAkB,IAAI,CAAC;QAC7D,KAAK,MAAM,CAAC,IAAI,KAAK,EAAE,CAAC;YACtB,IAAI,CAAmB,EAAE,CAA0B,CAAC;YACpD,IAAI,CAAC,CAAC,GAAG,EAAE,CAAC;gBACV,8DAA8D;gBAC9D,MAAM,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;gBACrD,IAAI,CAAC,GAAG,IAAI;oBAAE,SAAS;gBACvB,MAAM,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;gBAC7B,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC;gBACpD,CAAC,GAAG,YAAY,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,KAAK,EAAE,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC;YACjE,CAAC;iBAAM,CAAC;gBACN,MAAM,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,GAAI,CAAC,EAAE,EAAE,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;gBACrD,IAAI,EAAE,GAAG,IAAI;oBAAE,SAAS;gBACxB,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC;gBACzC,CAAC,GAAG,SAAS,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,KAAK,CAAC,CAAC;YAC/B,CAAC;YACD,IAAI,CAAC,CAAC;gBAAE,SAAS;YACjB,IAAI,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,EAAE,CAAC;gBAC9B,iGAAiG;gBACjG,MAAM,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC;gBACf,MAAM,CAAC,GAAG,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;gBAChC,MAAM,GAAG,MAAM,IAAI,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC;YACpF,CAAC;iBAAM,CAAC;gBACN,oEAAoE;gBACpE,MAAM,CAAC,GAAG,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;gBAChC,IAAI,GAAG,IAAI,IAAI,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC;YAC5E,CAAC;QACH,CAAC;QACD,OAAO,MAAM,IAAI,IAAI,IAAI,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAC7C,CAAC,CAAC;IACF,OAAO,EAAE,EAAE,EAAE,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,CAAC,EAAE,IAAI,CAAC,EAAE,EAAE,EAAE,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,CAAC,EAAE,KAAK,CAAC,EAAE,MAAM,EAAE,CAAC;AACzE,CAAC;AAED,iIAAiI;AACjI,MAAM,UAAU,QAAQ,CAAC,EAAU,EAAE,GAAW,EAAE,IAAY;IAC5D,MAAM,CAAC,GAAG,EAAE,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC;IACxB,IAAI,CAAC,CAAC;QAAE,OAAO,IAAI,CAAC;IACpB,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAC7C,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC;QAAE,OAAO,IAAI,CAAC;IAC1B,OAAO,QAAQ,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,MAAM,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,IAAI,KAAK,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,IAAI,EAAE,QAAQ,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC;AACvG,CAAC;AAED,gIAAgI;AAChI,MAAM,UAAU,UAAU,CAAC,EAAU,EAAE,GAAW,EAAE,IAAY;IAC9D,MAAM,CAAC,GAAG,QAAQ,CAAC,EAAE,EAAE,GAAG,EAAE,IAAI,CAAC,CAAC;IAClC,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,GAAG,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC;AAC7B,CAAC;AAED,0GAA0G;AAC1G,MAAM,UAAU,UAAU,CAAC,EAAU,EAAE,GAAW,EAAE,IAAY,EAAE,GAAc;IAC9E,MAAM,CAAC,GAAG,QAAQ,CAAC,EAAE,EAAE,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC;IACrD,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC;QAAE,OAAO,IAAI,CAAC;IAC1B,MAAM,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;IAC5E,MAAM,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,EAAE,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,CAAC,IAAI,KAAK,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,GAAG,GAAG,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC;IACrH,OAAO,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,GAAG,EAAE,GAAG,IAAI,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE,GAAG,CAAC,GAAG,EAAE,GAAG,IAAI,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,EAAE,CAAC;AAC1F,CAAC"}

package/dist/model/wallshape.d.ts

@@ -0,0 +1,15 @@
+import type { Sketch, XY } from './types';
+/** A piece of wall to fill: a straight wall (`id`), or a bevel at a sharp joint (`of`: a wall it belongs to). */
+export interface WallPiece {
+    id: string | null;
+    of: string;
+    pts: XY[];
+}
+/**
+ * The pieces to fill for the sketch's straight walls (`show`: which to include, e.g. not hidden construction walls).
+ * Each wall's outline runs: its start's right corner, its end's right corner, (its end point, at a joint), its end's
+ * left corner, its start's left corner, (its start point, at a joint) — right and left as seen going from start to end.
+ */
+export declare function wallPieces(sk: Sketch, show?: (w: {
+    constr?: boolean;
+}) => boolean): WallPiece[];

package/dist/model/wallshape.js

@@ -0,0 +1,89 @@
+import { hyp } from './geom';
+const left = (u) => ({ x: -u.y, y: u.x });
+const right = (u) => ({ x: u.y, y: -u.x });
+const at = (p, n, k) => ({ x: p.x + n.x * k, y: p.y + n.y * k });
+/** Where two lines (a point and a direction each) cross; for parallel ones, the middle of the two points if they're the same line, else null. */
+function cross(p1, d1, p2, d2) {
+    const c = d1.x * d2.y - d1.y * d2.x;
+    if (Math.abs(c) < 1e-9) {
+        const off = Math.abs((p2.x - p1.x) * d1.y - (p2.y - p1.y) * d1.x);
+        return off < 1e-6 ? { x: (p1.x + p2.x) / 2, y: (p1.y + p2.y) / 2 } : null;
+    }
+    const l = ((p2.x - p1.x) * d2.y - (p2.y - p1.y) * d2.x) / c;
+    return { x: p1.x + d1.x * l, y: p1.y + d1.y * l };
+}
+/**
+ * The pieces to fill for the sketch's straight walls (`show`: which to include, e.g. not hidden construction walls).
+ * Each wall's outline runs: its start's right corner, its end's right corner, (its end point, at a joint), its end's
+ * left corner, its start's left corner, (its start point, at a joint) — right and left as seen going from start to end.
+ */
+export function wallPieces(sk, show = () => true) {
+    const walls = Object.entries(sk.lines).filter(([, l]) => l.kind === 'wall' && show(l));
+    // what meets at each point: straight walls (their direction away from it) and whether a curved wall does
+    /** at each point a curved wall ends: the centres of those curves */
+    const ends = new Map(), curved = new Map();
+    for (const [id, l] of walls) {
+        const A = sk.points[l.a], B = sk.points[l.b], L = hyp(B.x - A.x, B.y - A.y);
+        if (L < 1e-9)
+            continue;
+        const u = { x: (B.x - A.x) / L, y: (B.y - A.y) / L };
+        (ends.get(l.a) ?? ends.set(l.a, []).get(l.a)).push({ id, u, t: l.thick });
+        (ends.get(l.b) ?? ends.set(l.b, []).get(l.b)).push({ id, u: { x: -u.x, y: -u.y }, t: l.thick });
+    }
+    for (const a of Object.values(sk.arcs)) {
+        if (a.kind !== 'wall' || !show(a))
+            continue;
+        for (const p of [a.a, a.b])
+            (curved.get(p) ?? curved.set(p, []).get(p)).push(sk.points[a.c]);
+    }
+    /** whether a straight wall leaving P along u runs on into a curve there (tangent to it: a fillet) */
+    const tangent = (pid, u) => {
+        const P = sk.points[pid];
+        return (curved.get(pid) ?? []).every(o => Math.abs(u.x * (P.x - o.x) + u.y * (P.y - o.y)) < 0.02 * (hyp(P.x - o.x, P.y - o.y) || 1));
+    };
+    /** each wall end's two corners: [left, right] as seen going away from the point; joint: whether the point itself is part of its outline */
+    const corners = new Map();
+    const bevels = [];
+    for (const [pid, list] of ends) {
+        const P = sk.points[pid];
+        if (list.length === 1 || curved.has(pid)) {
+            // a free end is square, and so is one running on into a curve (a fillet: the curve's end is square to it too);
+            // next to a curve at an angle, run on half the thickness so the two overlap
+            for (const e of list) {
+                const Q = curved.has(pid) && !tangent(pid, e.u) ? at(P, e.u, -e.t / 2) : P;
+                corners.set(e.id + '|' + pid, { l: at(Q, left(e.u), e.t / 2), r: at(Q, right(e.u), e.t / 2), joint: false });
+            }
+            continue;
+        }
+        // walls around the point, counter-clockwise; between each and the next, the corner where their sides cross
+        const sorted = [...list].sort((p, q) => Math.atan2(p.u.y, p.u.x) - Math.atan2(q.u.y, q.u.x));
+        const ccw = new Map(), cw = new Map();
+        for (let i = 0; i < sorted.length; i++) {
+            const a = sorted[i], b = sorted[(i + 1) % sorted.length];
+            const ea = at(P, left(a.u), a.t / 2), eb = at(P, right(b.u), b.t / 2);
+            const c = cross(ea, a.u, eb, b.u), limit = 2 * Math.max(a.t, b.t);
+            if (c && hyp(c.x - P.x, c.y - P.y) <= limit) {
+                ccw.set(i, c);
+                cw.set((i + 1) % sorted.length, c);
+                continue;
+            }
+            // too sharp (or parallel sides that don't meet): each side stops square, and a bevel closes the corner
+            ccw.set(i, ea);
+            cw.set((i + 1) % sorted.length, eb);
+            if (hyp(ea.x - eb.x, ea.y - eb.y) > 1e-6)
+                bevels.push({ id: null, of: a.id, pts: [P, ea, eb] });
+        }
+        sorted.forEach((e, i) => corners.set(e.id + '|' + pid, { l: ccw.get(i), r: cw.get(i), joint: true }));
+    }
+    const out = [];
+    for (const [id, l] of walls) {
+        const a = corners.get(id + '|' + l.a), b = corners.get(id + '|' + l.b);
+        if (!a || !b)
+            continue;
+        // at the start, away from it is along the wall; at the end, back along it — so its left is the wall's right
+        const pts = [a.r, b.l, ...(b.joint ? [sk.points[l.b]] : []), b.r, a.l, ...(a.joint ? [sk.points[l.a]] : [])];
+        out.push({ id, of: id, pts: pts.map(p => ({ x: p.x, y: p.y })) });
+    }
+    return [...out, ...bevels];
+}
+//# sourceMappingURL=wallshape.js.map