@rdlabo/capacitor-brotherprint 6.4.3 → 7.0.0-0

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ883PrintSettings.h

@@ -1,46 +0,0 @@
-//
-//  PJ883PrintSettings.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 5/6/22.
-//  Copyright (c) 2022 BMS. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
-
-
-@interface PJ883PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
-
-// These constants below are provided for reference only. DO NOT MODIFY!
-#define PJ883_RESOLUTION_HORZ 300
-#define PJ883_RESOLUTION_VERT 300
-
-// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
-#define PJ883_MAX_EXTRAFEEDDOTS (11*PJ883_RESOLUTION_VERT)
-
-// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
-// And, the setter functions will clip to these values. The reasons for these choices are described below.
-// If you require something different for some reason, please contact Technical Support.
-#define PJ883_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
-#define PJ883_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
-#define PJ883_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
-#define PJ883_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
-
-//*** IMPORTANT ***
-// SDK Users:
-// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
-// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ883PrintSettings).
-//
-// For a list of important properties in the settings that your application needs to set,
-// refer to the GenericPocketJetPrintSettings superclass.
-
-// SDK Designers:
-// The GenericPocketJetPrintSettings class handles all the important work.
-// This subclass only needs to provide the model-specific data to the generic class.
-
-//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
-@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
-@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
-
-
-@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ883PrintSettingsViewController.h

@@ -1,42 +0,0 @@
-//
-//  PJ883PrintSettingsViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 5/6/22.
-//  Copyright (c) 2022 BMS. All rights reserved.
-
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
-#import <BRLMPrinterKit/PJ883PrintSettings.h>
-
-// This is the DEFAULT popup contentSize for PJ883PrintSettingsViewController.
-//
-// You can override this by setting the "popoverSize" property (defined in the
-// PrintSettingsViewController superclass) to something different
-// before showing the ViewController.
-//
-// The popoverSize setting will be propagated to all of the "child" ViewControllers
-// of the main ViewController so all of the detail views will be the SAME size as each other.
-//
-// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
-//#define PJ883POPUPCONTENTSIZE CGSizeMake(400,480)
-#define PJ883POPUPCONTENTSIZE CGSizeMake(400,548)
-#define PJ883POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
-
-/*
- This class is a subclass of GenericPocketJetPrintSettingsViewController,
- which implements all the major functionality.
- 
- *** SDK Users:
- DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
- Always instantiate a model-specific class, e.g. PJ883PrintSettingsViewController
- */
-
-@interface PJ883PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
-{
-}
-
-@end
-
-

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PrintSettingTableViewController.h

@@ -1,51 +0,0 @@
-//
-//  PrintSettingTableViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 2/11/13.
-//  Copyright (c) 2013 Brother Mobile Solutions. All rights reserved.
-//
-// NOTE: This is a generic implementation for all print settings that use a
-// TableView to display the settings. It handles only a single setting at a time.
-//
-// NOTE: This class is used INTERNALLY to the SDK only. But, we need to make this a PUBLIC header file
-// because other public headers need to #import it due to the PrintSettingTableViewResponder protocol.
-
-#import <UIKit/UIKit.h>
-
-@protocol PrintSettingTableViewResponder
-// The "tableViewItemChanged" function must be implemented by the class that
-// uses this PrintSettingTableViewController.
-// This function is responsible to:
-// (1) set the new value to its copy of the printSettings,
-// (2) handle any "mutually exclusive" settings (such as FFMode and PaperType),
-// (3) call "printSettingsDidChange" function per the "PrintSettingsSetter"
-// protocol to pass the settings change notification along
-- (void)tableViewItemChanged: (int)whichSetting newItemValue:(int)newItemValue;
-@end
-
-@protocol PrintSettingTableViewSetter
-@property (assign, nonatomic) id <PrintSettingTableViewResponder> printSettingDelegate;
-@end
-
-
-@interface PrintSettingTableViewController : UITableViewController <UITableViewDelegate, UITableViewDataSource, PrintSettingTableViewSetter>
-{
-    UITableViewCell *_cellWithCheck;
-}
-// used internally only
-@property (nonatomic, retain) UITableViewCell *cellWithCheck;
-
-// Must be set by caller.
-@property (nonatomic, assign) int whichPrintSetting;
-@property (nonatomic, retain) NSString *viewTitle;
-@property (nonatomic, retain) NSArray *tableItemArray;
-@property (nonatomic, assign) int initialItemValueToCheck;
-@property (nonatomic, assign) UITableViewCellStyle cellStyle;
-@property (nonatomic, retain) NSString *section0Title;
-
-// The class which implements the printSettingDidChange function.
-// This MUST be set by the CALLER before we are loaded. It cannot be nil!!
-@property (assign, nonatomic) id <PrintSettingTableViewResponder> printSettingDelegate;
-
-@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PrintSettings.h

@@ -1,543 +0,0 @@
-//
-//  PrintSettings.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 9/11/12.
-//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
-//
-// NOTE: This is the super-class that contains properties and methods common to each printer model.
-
-#import <Foundation/Foundation.h>
-
-//#define ALLOW_BT_TEMPORARILY 1 // TODO: define or undefine this if applicable
-
-
-//*********************************************************************
-// PrintSettingsDelegate PROTOCOL
-//
-// Subclasses of PrintSettings are required to implement the following protocol.
-@protocol PrintSettingsDelegate
-
-//*** Methods
-// SDK Users: These are primary API methods that you may want to use!
-- (BOOL) validatePrintSettings;
-// TODO: Consider changing proto to return BOOL instead of void.
-// For loadPrefs, return FALSE if it detects that they have never been saved previously.
-// This could be helpful in some ISV scenarios.
-- (void) loadPreferences;
-- (void) savePreferences;
-
-// These are only convenience methods, if needed. But, we need to assure that each
-// subclass (and/or the superclass) implements them by adding them to the protocol.
-- (NSString *)stringFromCurrentPaperType;
-- (NSString *)stringFromCurrentPaperSize;
-- (NSString *)stringFromCurrentFormFeedMode;
-- (NSString *)stringFromCurrentExtraFeed;
-- (NSString *)stringFromCurrentDensity;
-
-// NOTE: IPAddress is already an NSString so don't need an API function for it.
-// NOTE: bluetoothDeviceName is already an NSString so don't need an API function for it.
-- (NSString *)stringFromCurrentChannelType;
-- (NSString *)stringFromCurrentIPPort;
-- (NSString *)stringFromCurrentScaleMode;
-- (NSString *)stringFromCurrentOrientation;
-- (NSString *)stringFromCurrentMargins;
-- (NSString *)stringFromCurrentHalftone;
-- (NSString *)stringFromCurrentThreshold;
-- (NSString *)stringFromCurrentCompress;
-- (NSString *)stringFromCurrentInvert;
-- (NSString *)stringFromCurrentPrinterModel;
-
-//*** Strings for custom properties not included in the GenericXXX class.
-// PJ
-- (NSString *)stringFromCurrentRollCase;
-- (NSString *)stringFromCurrentPrintSpeed;
-
-// RJ/TD
-- (NSString *)stringFromCurrentCoolingDelayEnabled;
-- (NSString *)stringFromCurrentCutterOptions;
-- (NSString *)stringFromCurrentResolution;
-
-//*** Properties
-// NOTE: If you wish to get/set any model-dependent properties, then you
-// will need to use (or cast to) an object of the specific subclass.
-// You will NOT be able to use an object of type "PrintSettings *" to
-// access these properties; the compiler will give a "may not respond to" warning.
-//
-// For example 1:
-//   PrintSettings *mySettings = [[PJ673PrintSettings alloc] init];
-//   // NO!!
-//   [mySettings setFormFeedMode:kFormFeedModeFixedPage];
-//   // YES!!
-//   [(PJ673PrintSettings *)mySettings setFormFeedMode:kFormFeedModeFixedPage];
-//
-// For example 2:
-//   PJ673PrintSettings *mySettings = [[PJ673PrintSettings alloc] init];
-//   [mySettings setFormFeedMode:kFormFeedModeFixedPage]; // OK!!
-//
-// Though many subclass  properties are common to all models,
-// (e.g. paperType, formFeedMode, extraFeed, density), and we COULD put
-// those into this protocol, this is not going to be possible when we
-// get to "paperSize", since PJ-673 handles this very differently from
-// RJ4/TD2 models. So, you will need a specific subclass for that anyway.
-//
-// Furthermore, if we were to put these into this protocol, then the
-// PrintSettings superclass will be required to add these properties to
-// the interface and synthesize them, though they will NEVER be used.
-//
-// Furthermore, since TD2 has properties that are specific for it, we
-// cannot add those to this protocol, so again you will have to use
-// (or cast to) a specific subclass to access these.
-//
-// As such, we will NOT add these 'common' model-specific properties
-// to this protocol.
-//
-// NOTE: We did add the corresponding "stringFromCurrentXXX" methods
-// above, because these can be accessed generically, even for PaperSize.
-
-@end // PrintSettingsDelegate protocol
-//*********************************************************************
-
-
-//*********************************************************************
-//*** NSUserDefaults
-// These are the top-level keys. Each model will have its own "dictionary" of subkeys
-// below this key, so all of the keys for a model will be self-contained.
-#define keyPJ673PrintSettings @"PJ-673 Print Settings"
-#define keyPJ763MFiPrintSettings @"PJ-763MFi Print Settings"
-#define keyPJ773PrintSettings @"PJ-773 Print Settings"
-#define keyPJ862PrintSettings @"PJ-862 Print Settings"
-#define keyPJ863PrintSettings @"PJ-863 Print Settings"
-#define keyPJ883PrintSettings @"PJ-883 Print Settings"
-#define keyRJ4040PrintSettings @"RJ-4040 Print Settings"
-#define keyRJ4030AiPrintSettings @"RJ-4030Ai Print Settings"
-#define keyRJ4230BPrintSettings @"RJ-4230B Print Settings"
-#define keyRJ4250WBPrintSettings @"RJ-4250WB Print Settings"
-#define keyRJ3050PrintSettings @"RJ-3050 Print Settings"
-#define keyRJ3050AiPrintSettings @"RJ-3050Ai Print Settings"
-#define keyRJ3150PrintSettings @"RJ-3150 Print Settings"
-#define keyRJ3150AiPrintSettings @"RJ-3150Ai Print Settings"
-#define keyRJ2050PrintSettings @"RJ-2050 Print Settings"
-#define keyRJ2140PrintSettings @"RJ-2140 Print Settings"
-#define keyRJ2150PrintSettings @"RJ-2150 Print Settings"
-#define keyRJ3230BPrintSettings @"RJ-3230B Print Settings"
-#define keyRJ3250WBPrintSettings @"RJ-3250WB Print Settings"
-#define keyTD2120NPrintSettings @"TD-2120N Print Settings"
-#define keyTD2125NPrintSettings @"TD-2125N Print Settings"
-#define keyTD2125NWBPrintSettings @"TD-2125NWB Print Settings"
-#define keyTD2130NPrintSettings @"TD-2130N Print Settings"
-#define keyTD2135NPrintSettings @"TD-2135N Print Settings"
-#define keyTD2135NWBPrintSettings @"TD-2135NWB Print Settings"
-#define keyTD2320DPrintSettings @"TD-2320D Print Settings"
-#define keyTD2320DFPrintSettings @"TD-2320DF Print Settings"
-#define keyTD2350DPrintSettings @"TD-2350D Print Settings"
-#define keyTD2350DFPrintSettings @"TD-2350DF Print Settings"
-#define keyTD2350DSAPrintSettings @"TD-2350DSA Print Settings"
-#define keyTD4550DNWBPrintSettings @"TD-4550DNWB Print Settings"
-
-// common properties from PrintSettings superclass
-#define keyChannelType @"ChannelType"
-#define keyIPAddress @"IPAddress"
-#define keyBluetoothDeviceName @"BluetoothDeviceName"
-#define keyIPPort @"IPPort"
-#define keyScaleMode @"Scale Mode"
-#define keyOrientation @"Orientation"
-#define keyHalftone @"Halftone"
-#define keyThreshold @"Threshold"
-#define keyCompressionOn @"Compress"
-#define keyMarginTop @"MarginTop"
-#define keyMarginLeft @"MarginLeft"
-#define keyMarginBottom @"MarginBottom"
-#define keyMarginRight @"MarginRight"
-#define keyInvertPrintData @"InvertPrintData"
-
-// common properties from each subclass
-#define keyPaperType @"PaperType"
-#define keyFormFeedMode @"FormFeedMode"
-#define keyExtraFeed @"ExtraFeed"
-#define keyDensity @"Density"
-
-// Papersize is handled differently for different models.
-// Some models (e.g. PJ-673) have a set of fixed sizes defined by constants.
-#define keyPaperSize @"PaperSize"
-// But, now we added Custom Size capability, so let's add some more keys
-#define keyCustomPaperWidth @"CustomPaperWidth"
-#define keyCustomPaperLength @"CustomPaperLength"
-#define keyCustomPaperAlign @"CustomPaperAlign"
-
-
-// For other models (RJ4040, RJ3050, RJ3150, TD2120N, TD2130N),
-// PaperSize is broken up into the following components
-#define keyPaperWidth @"PaperWidth"
-#define keyPaperLength @"PaperLength"
-#define keyPaperMarginWidth @"PaperMarginWidth"
-#define keyPaperMarginLength @"PaperMarginLength"
-#define keyLabelSpacing @"LabelSpacing"
-#define keyMarkWidth @"MarkWidth"
-#define keyMarkOffset @"MarkOffset"
-// new papersize related keys added in 2.3.4
-#define keyEnergyRank @"EnergyRank"
-#define keySensThrAdj @"Sensor Threshold Adjustment"
-#define keySensDutyAdj @"Sensor Duty Adjustment"
-#define keyHorzPosAdjDots @"Horz Position Adjustment"
-#define keyVertPosAdjDots @"Vert Position Adjustment"
-
-
-// TD2 specific keys
-#define keyPeelerEnabled @"Peeler Enabled"
-#define keyInvert180Degrees @"Invert 180 Degrees"
-
-// TD23 specific keys
-#define keyResolution @"Resolution"
-
-// RJ42 specific keys
-#define keyCoolingDelayEnabled @"Cooling Delay Enabled"
-
-// TD-4550DNWB specific keys
-#define keyCutAtEndOfJobEnabled @"CutAtEnd Enabled"
-#define keyAutoCutEnabled @"AutoCut Enabled"
-#define keyAutoCutEveryNLabels @"AutoCut Every N Labels"
-
-// PJ7 specific keys
-#define keyPrintSpeedOption @"Print Speed Option"
-#define keyRollCaseOption @"Roll Case Option"
-
-// PrintSettingsViewController specific keys
-#define keyBluetoothVCSearchSelectsSerialNumber @"Bluetooth Search Selects Serial Number"
-
-
-//*********************************************************************
-
-
-//*********************************************************************
-//*** Constant Enumerations
-// These are "common" to all printer models
-
-typedef enum
-{
-    // Currently supported printer models
-    // NOTE TO DEVELOPERS: Sometimes the order of the models defined here changes.
-    // While I probably *should* just add new models to the END of the list, instead I sometimes rearrange them
-    // so that they are grouped in a more meaningful way.
-    // Since save/loadPreferences SDK API uses a named key, that shouldn't cause you any problems if the enum changes.
-    // However, if your own app stores this value to preferences separately, I just realized that the value
-    // you saved from older SDK may no longer match the model enum value in a new SDK when you load it from prefs.
-    // As such, if you do store this in preferences,
-    // I recommend that you use **your own** defined enum values (or string values) for the "current model to use",
-    // rather than rely on these being the same with each new SDK release.
-    // If this affects your code in some way after you update to a new SDK, I apologize!!
-    //
-    // SDK Designers: Add new models to the END of this (and all) enum, to avoid changing the raw value for models from previous SDKs!!
-    kPrinterModelPJ673 = 1,
-    kPrinterModelPJ763MFi,
-    kPrinterModelPJ773,
-    kPrinterModelRJ4030Ai,
-    kPrinterModelRJ4040,
-    kPrinterModelRJ4230B,
-    kPrinterModelRJ4250WB,
-    kPrinterModelRJ3050,
-    kPrinterModelRJ3050Ai,
-    kPrinterModelRJ3150,
-    kPrinterModelRJ3150Ai,
-    kPrinterModelRJ2050,
-    kPrinterModelRJ2140,
-    kPrinterModelRJ2150,
-    kPrinterModelTD2120N,
-    kPrinterModelTD2130N,
-    kPrinterModelTD4550DNWB,
-    kPrinterModelRJ3230B,
-    kPrinterModelRJ3250WB,
-    kPrinterModelPJ862,
-    kPrinterModelPJ863,
-    kPrinterModelPJ883,
-    kPrinterModelTD2125N,
-    kPrinterModelTD2125NWB,
-    kPrinterModelTD2135N,
-    kPrinterModelTD2135NWB,
-    kPrinterModelTD2320D,   // NOTE: Each of these TD23xxx models can be either 203 or 300 dpi.
-    kPrinterModelTD2320DF,
-    kPrinterModelTD2350D,
-    kPrinterModelTD2350DF,
-    kPrinterModelTD2350DSA,
-    // Add new models at the END of the list, see above!
-
-} PRINTERMODEL;
-
-typedef enum
-{
-    kChannelTypeWIFI = 1,
-    kChannelTypeBluetooth,
-    kChannelTypeFile, // NOTE: When this is selected, SDK will create file "Output.prn" in the App Documents folder.
-} CHANNELTYPE;
-
-typedef enum
-{
-    kHalftoneThreshold = 1,
-    kHalftoneDiffusion,
-} HALFTONE;
-
-typedef enum
-{
-    kScaleModeActualSize = 1,
-    kScaleModeFitPage,
-    kScaleModeFitPageAspect,
-    kScaleModeFitWidthAspectAutoHeight,
-} SCALEMODE;
-
-typedef enum
-{
-    kOrientationPortrait = 1,
-    kOrientationLandscape90,
-    kOrientationPortrait180,
-    kOrientationLandscape270,
-} ORIENTATION;
-
-//*** The following enums are for properties defined in each subclass,
-// i.e. they are model-specific properties (at least as concerns the subset of values supported).
-// We define them here instead of in each subclass' header file so they can hold ALL of the
-// possible values for ALL models to avoid "redefinition of enumerator" compiler errors if we
-// attempt to use the same constant names in different enums within each subclass.
-// *** Each printer model is likely to support only a SUBSET of these values. ***
-// As such, we will handle limiting the available choices in the "setter" function for each
-// property in the appropriate PrintSettings subclass for each model.
-// Refer to the SDK Documentation for a list of values supported by each printer model.
-typedef enum
-{
-    kPaperSizeLetter=1,
-    kPaperSizeLegal,
-    kPaperSizeA4,
-    kPaperSizeCustom,
-} PAPERSIZE;
-
-typedef enum
-{
-    kPaperTypeRoll = 1, // unmarked roll, used by PJ, RJ, and TD
-    kPaperTypeCutsheet, // PJ only
-    kPaperTypePerfRoll, // marked roll, used by PJ, RJ, and TD
-    kPaperTypePerfRollRetract, // marked roll, with forced retraction, used by PJ only
-    kPaperTypeDieCutLabel, // label, used by RJ and TD only
-} PAPERTYPE;
-
-
-typedef enum
-{
-    kFormFeedModeNoFeed=1,
-    kFormFeedModeFixedPage,
-    kFormFeedModeEndOfPage,
-    kFormFeedModeEndOfPageRetract,
-} FORMFEEDMODE;
-
-typedef enum
-{
-    kDensity0 = 0, // start this one at 0 rather than 1. "stringFromDensity" in particular requires this.
-    kDensity1,
-    kDensity2,
-    kDensity3,
-    kDensity4,
-    kDensity5,
-    kDensity6,
-    kDensity7,
-    kDensity8,
-    kDensity9,
-    kDensity10,
-    kDensityUsePrinterSetting, // use value saved to printer, don't send command
-} DENSITY;
-
-// PJ-7, PJ-8 only
-typedef enum
-{
-    kRollCaseOption_None = 1,
-    kRollCaseOption_PARC001_NoAntiCurl,
-    kRollCaseOption_PARC001,
-    kRollCaseOption_UsePrinterSetting, // use value saved to printer, don't send command
-
-    // Add new items at the END of the enum so as not to affect preferences saved with older SDK
-    
-    // TODO: PJ8 appears to have added an option for PARC001_ShortFeed. The Command Ref Guide indicates it's also for PJ7.
-    //  But the PST does not have this option for PJ7. It does for PJ8. For now, don't add it.
-    //  I need to confirm with BIL whether PJ7 supports this or not.
-    //  If user needs it, they can select it in PST for PJ8 and choose "UsePrinterSetting" option in SDK.
-    //
-    // TODO: PJ8 models added a new "Custom" option for roll case.
-    //   * We could add a new enum "kRollCaseOption_Custom" here;
-    //   * HOWEVER, it seems to require 2 additional commands to be sent to setup the custom "lead position"
-    //     and "feed at end of the job". To support this, I have to add these other options to the PSVC.
-    //   * User can configure all of this using the Printer Setting Tool (PST).
-    //     And, in our SDK user/ISV can already choose the "UsePrinterSetting" option to choose whatever is configured
-    //     with the PST, so we don't send command at print time to override the PST setting.
-    //   * So for now, I will NOT add this new option.
-    
-
-} ROLL_CASE_OPTION;
-
-// PJ-7, PJ-8 only
-// NOTE: Renamed the enums to be more generic, since PJ8 has changed the speeds associated with the same command value
-// sent to printer as compared to PJ7 models.
-// We can modify the strings used in our GUI by overriding the stringFromPrintSpeed method for each model.
-typedef enum
-{
-    // NOTE: added new PJ8 only options below "UsePrinterSetting" so as not to change if enum was saved to preferences
-    // with old enum values.
-    // TODO: We should modify save/loadPreferences to use Strings instead of enums for ALL settings so we are free
-    // to change enum value order in future SDK releases.
-    
-
-                                            //*** Old PJ7 enum values were named as below...
-    kPrintSpeedOption_HighSpeed = 1,          // kPrintSpeedOption_65mmpersec = 1, // 2.5 ips
-    kPrintSpeedOption_MedHighSpeed,           // kPrintSpeedOption_48mmpersec,     // 1.9 ips
-    kPrintSpeedOption_MedLowSpeed,            // kPrintSpeedOption_41mmpersec,     // 1.6 ips
-    kPrintSpeedOption_LowSpeed,               // kPrintSpeedOption_27mmpersec,     // 1.1 ips
-    kPrintSpeedOption_UsePrinterSetting,      // use value saved to printer, don't send command
-    kPrintSpeedOption_FastDraftQuality,     // PJ8 only
-    kPrintSpeedOption_FastLineConversion,   // PJ8 only
-    
-    // Add new items at the END of the enum so as not to affect preferences saved with older SDK
-    
-} PRINT_SPEED_OPTION;
-
-// NOTE: This is only used with models which can have variable resolution, e.g. TD-23xx models.
-typedef enum
-{
-    kResolution203 = 203,
-    kResolution300 = 300
-} RESOLUTION;
-
-//*********************************************************************
-
-
-//*********************************************************************
-//*** struct definitions
-
-// Arbitrarily limit the size (in dots) of each margin dimension to something rational.
-// These values are used when setting and validating the margins.
-#define MARGINDOTSMIN 0
-#define MARGINDOTSMAX 1000
-
-typedef struct 
-{
-    int top;
-    int left;
-    int bottom;
-    int right;
-} MARGINS, *pMARGINS;
-//*********************************************************************
-
-
-@interface PrintSettings : NSObject <PrintSettingsDelegate>
-{
-    // provide subclasses with access to READONLY properties via ivars.
-    // Because they are readonly, there is no "Setter" method available in the superclass.
-    // The subclasses should be the only place where these properties are set.
-    // But, they will be used in this superclass.
-    // Users of this superclass can read the values if desired, but in most cases this
-    // will not be necessary.
-    PRINTERMODEL _printerModel;
-    
-    // provide subclasses with access to non-readonly ivars too, especially if subclass implements setter override.
-    CHANNELTYPE _channelType;
-
-}
-
-// NOTE: This superclass contains properties that will be common to all subclasses.
-
-// SDK Users: All of the properties below (and those in the PrintSettings subclasses)
-// are settable by you to change the printer behavior.
-// If you are not using the PrintSettingsViewController (either the SDK's or your own custom one),
-// then you should set each of these properties programmatically to your desired setting.
-
-@property (nonatomic, assign) CHANNELTYPE channelType;
-@property (nonatomic, retain) NSString *IPAddress;
-@property (nonatomic, assign) int IPPort;
-@property (nonatomic, retain) NSString *bluetoothDeviceNameOrSerialNumber;
-
-@property (nonatomic, assign) SCALEMODE scaleMode;
-@property (nonatomic, assign) ORIENTATION orientation;
-@property (nonatomic, assign) MARGINS marginDots;
-
-@property (nonatomic, assign) HALFTONE halftone;
-// INCREASE this value to make printout darker. Decrease to make it lighter. Default is 128.
-@property (nonatomic, assign) Byte threshold;
-@property (nonatomic, assign) BOOL compress;
-// NOTE: Added this property to allow inverting the print data (i.e. black<->white)
-// But, not adding this to the ViewController. It must be set programmatically.
-@property (nonatomic, assign) BOOL bInvert;
-
-//*** NOTE: The following properties are NOT used for printing,
-// but they are part of the PrintSettings superclass for convenience.
-
-// For save/loadPreferences, each subclass MUST set this during init.
-// NOTE: If desired, the caller can set this to be different from the default, so not using readonly attribute.
-@property (nonatomic, retain) NSString *preferencesKey; 
-
-//*** The following properties are used ONLY by the PrintSettingsViewController(s)
-// They are specified here only to allow SDK-related preferences to be stored in their own container
-// along with the rest of the preferences.
-@property (nonatomic, assign) BOOL bBluetoothVCSearchSelectsSerialNumber;
-
-
-//*** READONLY properties. Values will be set by the subclass. SDK User can NOT change it.
-// printerModel may be useful if the subclass  (e.g. PJ673PrintSettings) object instance is
-// stored inside the app using a superclass (e.g. PrintSettings) object reference.
-// This can be used to perform model-specific behavior in your app, if necessary.
-@property (readonly, nonatomic, assign) PRINTERMODEL printerModel;
-
-// *** PrintSettingsDelegate protocol
-// All subclasses of PrintSettings are required to implement these methods.
-// validatePrintSettings - This function assures that all properties are in range
-// and that there are no conflicting settings.
-- (BOOL) validatePrintSettings;
-- (void) loadPreferences;
-- (void) savePreferences;
-
-// These are only convenience methods, if needed. But, we need to assure that each
-// subclass (and/or the superclass) implements them by adding them to the protocol.
-
-//*** generate strings from CURRENT values of properties, for convenience
-- (NSString *)stringFromCurrentPaperType;
-- (NSString *)stringFromCurrentPaperSize;
-- (NSString *)stringFromCurrentFormFeedMode;
-- (NSString *)stringFromCurrentExtraFeed;
-- (NSString *)stringFromCurrentDensity;
-
-// NOTE: IPAddress is already an NSString so don't need an API function for it.
-// NOTE: bluetoothDeviceName is already an NSString so don't need an API function for it.
-- (NSString *)stringFromCurrentChannelType;
-- (NSString *)stringFromCurrentIPPort;
-- (NSString *)stringFromCurrentScaleMode;
-- (NSString *)stringFromCurrentOrientation;
-- (NSString *)stringFromCurrentMargins;
-- (NSString *)stringFromCurrentHalftone;
-- (NSString *)stringFromCurrentThreshold;
-- (NSString *)stringFromCurrentCompress;
-- (NSString *)stringFromCurrentInvert;
-- (NSString *)stringFromCurrentPrinterModel;
-// Strings for custom properties not included in the GenericXXX class.
-// PJ
-- (NSString *)stringFromCurrentRollCase;
-- (NSString *)stringFromCurrentPrintSpeed;
-// RJ/TD
-- (NSString *)stringFromCurrentCoolingDelayEnabled;
-- (NSString *)stringFromCurrentCutterOptions; // TD-4550DNWB and all TD23xx only for now.
-- (NSString *)stringFromCurrentResolution; // all TD23xx only for now.
-
-
-//*** generate strings from SPECIFIC constants, for convenience
-// NOTE: IPAddress is already an NSString so don't need an API function for it.
-// NOTE: bluetoothDeviceName is already an NSString so don't need an API function for it.
-- (NSString *)stringFromChannelType:(CHANNELTYPE)channelType;
-- (NSString *)stringFromIPPort: (int)ipPort;
-- (NSString *)stringFromScaleMode:(SCALEMODE)scaleMode;
-- (NSString *)stringFromOrientation:(ORIENTATION)orientation;
-- (NSString *)stringFromMargins:(MARGINS)margins;
-- (NSString *)stringFromHalftone: (HALFTONE)halftone;
-- (NSString *)stringFromThreshold:(Byte)threshold;
-- (NSString *)stringFromBool: (BOOL)boolValue; // used with compress, invert
-- (NSString *)stringFromPrinterModel: (PRINTERMODEL)model;
-// Strings for custom properties not included in the GenericXXX class.
-// PJ
-- (NSString *)stringFromRollCase:(ROLL_CASE_OPTION)rollCaseOption;
-- (NSString *)stringFromPrintSpeed:(PRINT_SPEED_OPTION)printSpeedOption;
-// RJ/TD
-- (NSString *)stringFromCutEveryNLabels:(Byte)nLabels;
-
-@end