@rdlabo/capacitor-brotherprint 6.4.3 → 7.0.0-0

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/GenericMobileLabelModelPrintSettingsViewController.h

@@ -1,50 +0,0 @@
-//
-//  GenericMobileLabelModelPrintSettingsViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 9/27/13.
-//  Copyright (c) 2013 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/PrintSettingsViewController.h>
-#import <BRLMPrinterKit/GenericMobileLabelModelPrintSettings.h>
-#import <BRLMPrinterKit/PrintSettingTableViewController.h> // for PrintSettingTableViewResponder protocol, internal use only
-
-
-////////////////////////////////////////////////////////////////////////////////
-
-
-//*********************************************************************
-// GenericMobileLabelModelPrintSettingsViewController INTERFACE
-//
-//*** IMPORTANT: *** DO NOT INSTANTIATE AN OBJECT OF THIS CLASS!!!!! ***
-// The GenericMobileLabelModelPrintSettingsViewController class is essentially an
-// ABSTRACT class.
-// Instead, you should instantiate the model-specific class,
-// e.g. RJ4040PrintSettingsViewController.
-//*********************************************************************
-
-
-@interface GenericMobileLabelModelPrintSettingsViewController : PrintSettingsViewController < UITableViewDelegate, UITableViewDataSource, PrintSettingTableViewResponder>
-{
-}
-
-// "style" MUST be set to UITableViewStyleGrouped!!
--(id)initWithStyle:(UITableViewStyle)style;
-
-
-// SDK Designers: The PrintSettingsViewController superclass defines several properties:
-//   printSettings, popoverSize, rowHeight, fontSize, printSettingsDelegate,
-//   showIPAddressHelpButton, IPAddressHelpFileName, and showSettingsOptionMask.
-// So, they are not defined in here.
-// However, this class and/or a model-specific subclass should "init" these properties
-// and handle setter overrides (if necessary).
-//
-// SDK Users: You should be familiar with the superclass properties so you can set
-// them accordingly, in particular the printSettingsDelegate (which handles
-// the PrintSettingsResponder protocol).
-
-
-@end
-
-

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/GenericPocketJetPrintSettings.h

@@ -1,99 +0,0 @@
-//
-//  GenericPocketJetPrintSettings.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 9/23/15.
-//  Copyright (c) 2012-15 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/PrintSettings.h>
-
-typedef enum
-{
-    kCustomPaperAlignLeft = 0,
-    kCustomPaperAlignCenter,
-} CUSTOMPAPERALIGN;
-
-@interface GenericPocketJetPrintSettings : PrintSettings <PrintSettingsDelegate>
-{
-    // provide subclasses with access to readonly properties via ivars.
-    // Because they are readonly, there is no "Setter" method available in the superclass.
-    // The subclasses should be the only place where these properties are set.
-    // But, they will be used in this superclass.
-    // Users of this superclass can read the values if desired, but in most cases this
-    // will not be necessary.
-    int _resolutionHorz;
-    int _resolutionVert;
-    int _customPaperWidthDotsMin;
-    int _customPaperWidthDotsMax;
-    int _customPaperLengthDotsMin;
-    int _customPaperLengthDotsMax;
-    int _extraFeedMax;
-}
-
-
-//*** IMPORTANT (for SDK Users):
-// *** DO NOT INSTANTIATE AN OBJECT OF THIS CLASS!!!!! ***
-// The GenericPocketJetPrintSettings class is essentially an ABSTRACT class.
-// Instead, you should instantiate the model-specific class, e.g. PJ673PrintSettings.
-
-//*** The following properties should be set by your app code, either PROGRAMMATICALLY
-// or by using one of the PrintSettingsViewControllers (which may not set all properties).
-
-// The properties and methods in this super-class will be COMMON for all
-// of the PocketJet printer models.
-
-// SDK Users: All of the properties below (and those in the PrintSettings superclass)
-// are settable by you to change the printer behavior.
-// If you are not using the PrintSettingsViewController (either the SDK's or your own custom one),
-// then you should set each of these properties programmatically to your desired setting.
-@property (nonatomic, assign) PAPERSIZE paperSize;
-@property (nonatomic, assign) PAPERTYPE paperType;
-@property (nonatomic, assign) FORMFEEDMODE formFeedMode;
-@property (nonatomic,assign) int extraFeed; // used with kFormFeedModeNoFeed only
-@property (nonatomic, assign) DENSITY density;
-// These 3 properties are used ONLY when paperSize is set to kPaperSizeCustom!
-@property (nonatomic, assign) int customPaperWidthDots;
-@property (nonatomic, assign) int customPaperLengthDots;
-@property (nonatomic, assign) CUSTOMPAPERALIGN customPaperAlign;
-
-
-//*** The properties below are READ ONLY. SDK Users can NOT set them!!
-// Each subclass MUST set them to their model-specific values in their init method.
-// The purpose of this GenericPocketJetPrintSettings class is to implement COMMON
-// code so it does not have to be duplicated for each similar printer model. However, it
-// requires these model-dependent properties to be set by the SUBCLASS.
-@property (readonly, nonatomic, assign) int resolutionHorz;
-@property (readonly, nonatomic, assign) int resolutionVert;
-@property (readonly, nonatomic, assign) int customPaperWidthDotsMin;
-@property (readonly, nonatomic, assign) int customPaperWidthDotsMax;
-@property (readonly, nonatomic, assign) int customPaperLengthDotsMin;
-@property (readonly, nonatomic, assign) int customPaperLengthDotsMax;
-@property (readonly, nonatomic, assign) int extraFeedMax;
-
-
-// *** PrintSettingsDelegate protocol
-// All subclasses of PrintSettings are required to implement these methods.
-// validatePrintSettings - This function assures that all properties are in range
-// and that there are no conflicting settings. 
-- (BOOL)validatePrintSettings;
-- (void) loadPreferences;
-- (void) savePreferences;
-//generate strings from CURRENT settings, for convenience.
-// This is part of the PrintSettingsDelegateProtocol too.
-- (NSString *)stringFromCurrentPaperType;
-- (NSString *)stringFromCurrentPaperSize;
-- (NSString *)stringFromCurrentFormFeedMode;
-- (NSString *)stringFromCurrentExtraFeed;
-- (NSString *)stringFromCurrentDensity;
-
-
-//*** generate strings from constants, for convenience
-- (NSString *)stringFromPaperType: (PAPERTYPE)paperType;
-- (NSString *)stringFromPaperSize: (PAPERSIZE)paperSize;
-- (NSString *)stringFromFormFeedMode: (FORMFEEDMODE)ffmode;
-- (NSString *)stringFromExtraFeed:(int)extraFeed;
-- (NSString *)stringFromDensity: (DENSITY)density;
-
-
-@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/GenericPocketJetPrintSettingsViewController.h

@@ -1,47 +0,0 @@
-//
-//  GenericPocketJetPrintSettingsViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 8/8/12.
-//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/PrintSettingsViewController.h>
-#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
-#import <BRLMPrinterKit/PrintSettingTableViewController.h> // for PrintSettingTableViewResponder protocol, internal use only
-
-
-
-
-//*********************************************************************
-// GenericPocketJetPrintSettingsViewController INTERFACE
-//
-//*** IMPORTANT: *** DO NOT INSTANTIATE AN OBJECT OF THIS CLASS!!!!! ***
-// The GenericPocketJetPrintSettingsViewController class is essentially an
-// ABSTRACT class.
-// Instead, you should instantiate the model-specific class,
-// e.g. PJ673PrintSettingsViewController.
-//*********************************************************************
-
-@interface GenericPocketJetPrintSettingsViewController : PrintSettingsViewController <UITableViewDelegate, UITableViewDataSource, PrintSettingTableViewResponder>
-{
-}
-
-// "style" MUST be set to UITableViewStyleGrouped!!
--(id)initWithStyle:(UITableViewStyle)style;
-
-// SDK Designers: The PrintSettingsViewController superclass defines several properties:
-//   printSettings, popoverSize, rowHeight, fontSize, printSettingsDelegate,
-//   showIPAddressHelpButton, IPAddressHelpFileName, and showSettingsOptionMask.
-// So, they are not defined in here.
-// However, this class and/or a model-specific subclass should "init" these properties
-// and handle setter overrides (if necessary).
-//
-// SDK Users: You should be familiar with the superclass properties so you can set
-// them accordingly, in particular the printSettingsDelegate (which handles
-// the PrintSettingsResponder protocol).
-
-
-@end
-
-

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/ImageCreationBlock.h

@@ -1,17 +0,0 @@
-//
-//  ImageCreationBlock.h
-//  BRLMPrinterKit
-//
-//  Created by banro on 2021/11/15.
-//  Copyright © 2021 Brother Industries. All rights reserved.
-//
-
-#ifndef ImageCreationBlock_h
-#define ImageCreationBlock_h
-
-#import <Foundation/Foundation.h>
-
-// _Nonnullを一つでも使うと、そのヘッダーファイル内全ての関数に警告が表示されてしまうのでヘッダーを分離している
-typedef _Nonnull CGImageRef (^ImageCreationBlock)(void);
-
-#endif /* ImageCreationBlock_h */

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ673PrintSettings.h

@@ -1,43 +0,0 @@
-//
-//  PJ673PrintSettings.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 9/11/12.
-//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
-
-@interface PJ673PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
-
-// These constants below are provided for reference only. DO NOT MODIFY!
-#define PJ673_RESOLUTION_HORZ 300
-#define PJ673_RESOLUTION_VERT 300
-
-// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
-#define PJ673_MAX_EXTRAFEEDDOTS (11*PJ673_RESOLUTION_VERT)
-
-// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
-// And, the setter functions will clip to these values. The reasons for these choices are described below.
-// If you require something different for some reason, please contact Technical Support.
-#define PJ673_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
-#define PJ673_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
-#define PJ673_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
-#define PJ673_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
-
-//*** IMPORTANT ***
-// SDK Users:
-// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
-// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ673PrintSettings).
-//
-// For a list of important properties in the settings that your application needs to set,
-// refer to the GenericPocketJetPrintSettings superclass.
-
-// SDK Designers:
-// The GenericPocketJetPrintSettings class handles all the important work.
-// This subclass only needs to provide the model-specific data to the generic class.
-
-//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
-
-
-@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ673PrintSettingsViewController.h

@@ -1,40 +0,0 @@
-//
-//  PJ673PrintSettingsViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 8/8/12.
-//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
-#import <BRLMPrinterKit/PJ673PrintSettings.h>
-
-// This is the DEFAULT popup contentSize for PJ673PrintSettingsViewController.
-//
-// You can override this by setting the "popoverSize" property (defined in the
-// PrintSettingsViewController superclass) to something different
-// before showing the ViewController.
-//
-// The popoverSize setting will be propagated to all of the "child" ViewControllers
-// of the main ViewController so all of the detail views will be the SAME size as each other.
-//
-// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
-#define PJ673POPUPCONTENTSIZE CGSizeMake(400,480)
-#define PJ673POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
-
-/*
- This class is a subclass of GenericPocketJetPrintSettingsViewController,
- which implements all the major functionality.
- 
- *** SDK Users:
- DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
- Always instantiate a model-specific class, e.g. PJ673PrintSettingsViewController
- */
-
-@interface PJ673PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
-{
-}
-
-@end
-
-

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ763MFiPrintSettings.h

@@ -1,45 +0,0 @@
-//
-//  PJ763MFiPrintSettings.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 9/11/12.
-//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
-
-@interface PJ763MFiPrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
-
-// These constants below are provided for reference only. DO NOT MODIFY!
-#define PJ763MFi_RESOLUTION_HORZ 300
-#define PJ763MFi_RESOLUTION_VERT 300
-
-// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
-#define PJ763MFi_MAX_EXTRAFEEDDOTS (11*PJ763MFi_RESOLUTION_VERT)
-
-// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
-// And, the setter functions will clip to these values. The reasons for these choices are described below.
-// If you require something different for some reason, please contact Technical Support.
-#define PJ763MFi_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
-#define PJ763MFi_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
-#define PJ763MFi_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
-#define PJ763MFi_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
-
-//*** IMPORTANT ***
-// SDK Users:
-// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
-// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ763MFiPrintSettings).
-//
-// For a list of important properties in the settings that your application needs to set,
-// refer to the GenericPocketJetPrintSettings superclass.
-
-// SDK Designers:
-// The GenericPocketJetPrintSettings class handles all the important work.
-// This subclass only needs to provide the model-specific data to the generic class.
-
-//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
-@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
-@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
-
-
-@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ763MFiPrintSettingsViewController.h

@@ -1,41 +0,0 @@
-//
-//  PJ763MFiPrintSettingsViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 8/8/12.
-//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
-#import <BRLMPrinterKit/PJ763MFiPrintSettings.h>
-
-// This is the DEFAULT popup contentSize for PJ763MFiPrintSettingsViewController.
-//
-// You can override this by setting the "popoverSize" property (defined in the
-// PrintSettingsViewController superclass) to something different
-// before showing the ViewController.
-//
-// The popoverSize setting will be propagated to all of the "child" ViewControllers
-// of the main ViewController so all of the detail views will be the SAME size as each other.
-//
-// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
-//#define PJ763MFiPOPUPCONTENTSIZE CGSizeMake(400,480)
-#define PJ763MFiPOPUPCONTENTSIZE CGSizeMake(400,548)
-#define PJ763MFiPOPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
-
-/*
- This class is a subclass of GenericPocketJetPrintSettingsViewController,
- which implements all the major functionality.
- 
- *** SDK Users:
- DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
- Always instantiate a model-specific class, e.g. PJ763MFiPrintSettingsViewController
- */
-
-@interface PJ763MFiPrintSettingsViewController : GenericPocketJetPrintSettingsViewController
-{
-}
-
-@end
-
-

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ773PrintSettings.h

@@ -1,46 +0,0 @@
-//
-//  PJ773PrintSettings.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 9/11/12.
-//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
-
-
-@interface PJ773PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
-
-// These constants below are provided for reference only. DO NOT MODIFY!
-#define PJ773_RESOLUTION_HORZ 300
-#define PJ773_RESOLUTION_VERT 300
-
-// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
-#define PJ773_MAX_EXTRAFEEDDOTS (11*PJ773_RESOLUTION_VERT)
-
-// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
-// And, the setter functions will clip to these values. The reasons for these choices are described below.
-// If you require something different for some reason, please contact Technical Support.
-#define PJ773_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
-#define PJ773_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
-#define PJ773_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
-#define PJ773_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
-
-//*** IMPORTANT ***
-// SDK Users:
-// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
-// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ773PrintSettings).
-//
-// For a list of important properties in the settings that your application needs to set,
-// refer to the GenericPocketJetPrintSettings superclass.
-
-// SDK Designers:
-// The GenericPocketJetPrintSettings class handles all the important work.
-// This subclass only needs to provide the model-specific data to the generic class.
-
-//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
-@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
-@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
-
-
-@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ773PrintSettingsViewController.h

@@ -1,41 +0,0 @@
-//
-//  PJ773PrintSettingsViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 8/8/12.
-//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
-#import <BRLMPrinterKit/PJ773PrintSettings.h>
-
-// This is the DEFAULT popup contentSize for PJ773PrintSettingsViewController.
-//
-// You can override this by setting the "popoverSize" property (defined in the
-// PrintSettingsViewController superclass) to something different
-// before showing the ViewController.
-//
-// The popoverSize setting will be propagated to all of the "child" ViewControllers
-// of the main ViewController so all of the detail views will be the SAME size as each other.
-//
-// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
-//#define PJ773POPUPCONTENTSIZE CGSizeMake(400,480)
-#define PJ773POPUPCONTENTSIZE CGSizeMake(400,548)
-#define PJ773POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
-
-/*
- This class is a subclass of GenericPocketJetPrintSettingsViewController,
- which implements all the major functionality.
- 
- *** SDK Users:
- DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
- Always instantiate a model-specific class, e.g. PJ773PrintSettingsViewController
- */
-
-@interface PJ773PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
-{
-}
-
-@end
-
-

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ862PrintSettings.h

@@ -1,47 +0,0 @@
-//
-//  PJ862PrintSettings.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 5/6/22.
-//  Copyright (c) 2022 BMS. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
-
-
-@interface PJ862PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
-
-// These constants below are provided for reference only. DO NOT MODIFY!
-// NOTE: Printer is actually 203x203, but Command Ref Guide is defining all specs as though 200x200.
-#define PJ862_RESOLUTION_HORZ 200
-#define PJ862_RESOLUTION_VERT 200
-
-// Arbitrarily restrict extraFeed to 11". There is no reason to be larger.
-#define PJ862_MAX_EXTRAFEEDDOTS (11*PJ862_RESOLUTION_VERT)
-
-// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
-// And, the setter functions will clip to these values. The reasons for these choices are described below.
-// If you require something different for some reason, please contact Technical Support.
-#define PJ862_CUSTOM_WIDTHDOTS_MIN 800 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
-#define PJ862_CUSTOM_WIDTHDOTS_MAX 1700 // 8.5" = max paper width
-#define PJ862_CUSTOM_LENGTHDOTS_MIN 400 // 2" to allow PerfRoll paper to print anything due to large unprintable area
-#define PJ862_CUSTOM_LENGTHDOTS_MAX 20000 // 100", arbitrary
-
-//*** IMPORTANT ***
-// SDK Users:
-// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
-// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ862PrintSettings).
-//
-// For a list of important properties in the settings that your application needs to set,
-// refer to the GenericPocketJetPrintSettings superclass.
-
-// SDK Designers:
-// The GenericPocketJetPrintSettings class handles all the important work.
-// This subclass only needs to provide the model-specific data to the generic class.
-
-//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
-@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
-@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
-
-
-@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ862PrintSettingsViewController.h

@@ -1,41 +0,0 @@
-//
-//  PJ862PrintSettingsViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 5/6/22.
-//  Copyright (c) 2022 BMS. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
-#import <BRLMPrinterKit/PJ862PrintSettings.h>
-
-// This is the DEFAULT popup contentSize for PJ862PrintSettingsViewController.
-//
-// You can override this by setting the "popoverSize" property (defined in the
-// PrintSettingsViewController superclass) to something different
-// before showing the ViewController.
-//
-// The popoverSize setting will be propagated to all of the "child" ViewControllers
-// of the main ViewController so all of the detail views will be the SAME size as each other.
-//
-// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
-//#define PJ862POPUPCONTENTSIZE CGSizeMake(400,480)
-#define PJ862POPUPCONTENTSIZE CGSizeMake(400,548)
-#define PJ862POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
-
-/*
- This class is a subclass of GenericPocketJetPrintSettingsViewController,
- which implements all the major functionality.
- 
- *** SDK Users:
- DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
- Always instantiate a model-specific class, e.g. PJ862PrintSettingsViewController
- */
-
-@interface PJ862PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
-{
-}
-
-@end
-
-

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ863PrintSettings.h

@@ -1,46 +0,0 @@
-//
-//  PJ863PrintSettings.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 5/6/22.
-//  Copyright (c) 2022 BMS. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
-
-
-@interface PJ863PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
-
-// These constants below are provided for reference only. DO NOT MODIFY!
-#define PJ863_RESOLUTION_HORZ 300
-#define PJ863_RESOLUTION_VERT 300
-
-// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
-#define PJ863_MAX_EXTRAFEEDDOTS (11*PJ863_RESOLUTION_VERT)
-
-// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
-// And, the setter functions will clip to these values. The reasons for these choices are described below.
-// If you require something different for some reason, please contact Technical Support.
-#define PJ863_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
-#define PJ863_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
-#define PJ863_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
-#define PJ863_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
-
-//*** IMPORTANT ***
-// SDK Users:
-// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
-// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ863PrintSettings).
-//
-// For a list of important properties in the settings that your application needs to set,
-// refer to the GenericPocketJetPrintSettings superclass.
-
-// SDK Designers:
-// The GenericPocketJetPrintSettings class handles all the important work.
-// This subclass only needs to provide the model-specific data to the generic class.
-
-//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
-@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
-@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
-
-
-@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ863PrintSettingsViewController.h

@@ -1,41 +0,0 @@
-//
-//  PJ863PrintSettingsViewController.h
-//  BMSPrinterKit
-//
-//  Created by BMS on 5/6/22.
-//  Copyright (c) 2022 BMS. All rights reserved.
-//
-
-#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
-#import <BRLMPrinterKit/PJ863PrintSettings.h>
-
-// This is the DEFAULT popup contentSize for PJ863PrintSettingsViewController.
-//
-// You can override this by setting the "popoverSize" property (defined in the
-// PrintSettingsViewController superclass) to something different
-// before showing the ViewController.
-//
-// The popoverSize setting will be propagated to all of the "child" ViewControllers
-// of the main ViewController so all of the detail views will be the SAME size as each other.
-//
-// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
-//#define PJ863POPUPCONTENTSIZE CGSizeMake(400,480)
-#define PJ863POPUPCONTENTSIZE CGSizeMake(400,548)
-#define PJ863POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
-
-/*
- This class is a subclass of GenericPocketJetPrintSettingsViewController,
- which implements all the major functionality.
- 
- *** SDK Users:
- DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
- Always instantiate a model-specific class, e.g. PJ863PrintSettingsViewController
- */
-
-@interface PJ863PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
-{
-}
-
-@end
-
-