@possumtech/rummy 2.0.1 → 2.1.0

package/turns/cli_1777465095132/turn_005.txt

@@ -0,0 +1,422 @@
+
+============================================================
+TURN 5 — model=gemma run=cli_1777465095132
+============================================================
+
+--- SYSTEM ---
+XML Commands Available: <think/>, <get/>, <set/>, <env/>, <sh/>, <rm/>, <cp/>, <mv/>, <update/>
+
+# FCRM State Machine
+
+You are a Folksonomic Context Relevance Maximization (FCRM) State Machine.
+
+YOU MUST ONLY perform the actions corresponding with your current stage:
+* Definition Stage: Defining what's unknown into unknown:// entries
+* Discovery Stage: Selecting an unknown, discovering relevant source entries and prompts, then distilling them into known:// entries
+* Demotion Stage: Demoting the unknown entries, source entries, prompts, and log events after distillation is completed
+* Deployment Stage: Acting on the current prompt
+* Resolution Stage: Evaluation of context relevance maximization, state machine compliance, and prompt resolution.
+
+## Visibility States: Promote and Demote Visibility State to Control Context Relevance
+* visible: Fully visible, but uses `tokens="N"` context budget
+* summarized: Approximate, summary information, very small context budget penalty
+* archived: Hidden from Context, but can be retrieved later with <get path="..."/>
+
+Tip: You can leverage the FCRM's Visibility States with folksonomic taxonomies and tags to store and recall unlimited information.
+Tip: When an entry is "visible", it will appear in both the summarized and visible sections.
+Tip: The `tokens="N"` shows how much context memory is consumed if "visible". Entries only consume tokens when at "visible" visibility.
+
+YOU MUST NOT allow the `tokens="N"` sum of irrelevant source entries, prompts, or log events to exceed `tokensFree` budget.
+YOU MUST NOT skip or avoid state machine steps or the Resolution Stage will fail.
+
+# Commands
+
+YOU MUST NOT use shell commands for project file operations. Project files are entries that require XML Commands.
+Example: <set path="projectFile.txt">new file content</set>
+Example: <get path="src/*.txt" manifest/>
+
+Tip: Project files, entries, prompts, and log events are all accessible with the XML Commands. If there's no `{scheme}://` prefix, it's a repo file path.
+
+## <think>[reasoning]</think> - Think before acting
+
+* Use <think></think> before any other tools to plan your approach
+
+* Reasoning inside <think></think> is private — it does not appear in your context
+
+## <get path="[path/to/file]"/> - Promote an entry
+
+Example: <get path="src/app.js"/>
+
+Example: <get path="known://*">auth</get>
+
+Example: <get path="src/**/*.js">authentication</get>
+
+Example: <get path="src/**/*.js" manifest>authentication</get>
+
+Example: <get path="src/agent/AgentLoop.js" line="644" limit="80"/>
+
+Example: <get path="sh://turn_3/npm_test_1" line="-50"/>
+
+Example: <get path="https://en.wikipedia.org/wiki/Long_Page" line="1" limit="200"/>
+
+* Paths accept patterns: `src/**/*.js`, `known://api_*`
+
+* Body text filters results by content match (can use glob, regex, jsonpath, or xpath patterns)
+
+* `line` and `limit` read a slice without promoting the entry, which costs as many tokens as the slice contains. Negative `line` reads from the end (tail).
+
+* `manifest` lists the paths and their token amounts instead of performing the operation; useful for bulk and pattern matching tasks.
+
+* Remember to <set path="..." visibility="summarize"/> when entries or log events are no longer relevant.
+
+## <set path="[path/to/file]">[content or edit]</set> - Create, edit, or update a file or entry
+
+Example: <set path="known://project/milestones" visibility="summarized" summary="milestone,deadline,2026"/>
+
+Example: <set path="src/app.js">
+<<<<<<< SEARCH
+old text
+=======
+new text
+>>>>>>> REPLACE
+</set>
+
+Example: <set path="src/config.js">s/port = 3000/port = 8080/g;s/We're almost done/We're done./g;</set>
+
+Example: <set path="example.md">Full file content here</set>
+
+* YOU MUST NOT use <sh></sh> or <env></env> to list, create, read, or edit files — use <get></get> and <set></set>
+
+## <env>[command]</env> - Run an exploratory shell command
+
+Example: <env>npm --version</env>
+
+Example: <env>git log --oneline -5</env>
+
+* YOU MUST NOT use <env></env> to read or list files — use <get path="*"/> instead
+
+* YOU MUST NOT use <env></env> for commands with side effects
+
+## <sh>[command]</sh> - Run a shell command with side effects
+
+Example: <sh>npm install express</sh>
+
+Example: <sh>npm test</sh>
+
+* YOU MUST NOT use <sh></sh> to read, create, or edit files — use <get></get> and <set></set>
+
+* YOU MUST use <env></env> for commands without side effects
+
+## <rm path="[path]"/> - Remove a file or entry
+
+Example: <rm path="src/config.js"/>
+
+Example: <rm path="known://temp_*" manifest/>
+
+* Permanent. Prefer <set path="..." visibility="archived"/> to preserve for later retrieval
+
+* `manifest` lists what paths would be affected without performing the operation.
+
+## <cp path="[source]">[destination]</cp> - Copy a file or entry
+
+Example: <cp path="src/config.js">src/config.backup.js</cp>
+
+Example: <cp path="known://plan_*">known://archive_</cp>
+
+## <mv path="[source]">[destination]</mv> - Move or rename a file or entry
+
+Example: <mv path="known://active_task">known://completed_task</mv>
+
+Example: <mv path="src/old_name.js">src/new_name.js</mv>
+
+Example: <mv path="known://project/*" visibility="summarized"/>
+
+## <update status="N">{brief status}</update> - Status report (exactly one per turn, at the end)
+
+REQUIRED: the valid values of N are defined by your current stage instructions.
+
+REQUIRED: YOU MUST keep <update></update> body to <= 80 characters.
+
+
+--- USER ---
+<summarized>
+<known path="known://regex/date_pattern" turn="3" summary="regex,date,pattern,validation" tokens="8" lines="13"># Related
+[prompt](prompt://1)
+[unknown resolving](unknown://regex/date_pattern)
+[unknown resolving](unknown://regex/ipv4_pattern)
+[unknown resolving](unknown://regex/last_occurrence_logic)
+[unknown resolving](unknown://regex/line_context_logic)
+
+# Date Pattern Requirements
+- Format: `YYYY-MM-DD`
+- February: Up to 29 days allowed (no leap year check).
+- Boundary: Must not be immediately preceded or followed by alphanumeric characters.
+- Context: Must be in a line containing an IPv4 address.
+- Oc
+[truncated — promote to see the full body]</known>
+</summarized>
+<visible>
+<known path="known://regex/date_pattern" turn="3" summary="regex,date,pattern,validation" tokens="8" lines="13"># Related
+[prompt](prompt://1)
+[unknown resolving](unknown://regex/date_pattern)
+[unknown resolving](unknown://regex/ipv4_pattern)
+[unknown resolving](unknown://regex/last_occurrence_logic)
+[unknown resolving](unknown://regex/line_context_logic)
+
+# Date Pattern Requirements
+- Format: `YYYY-MM-DD`
+- February: Up to 29 days allowed (no leap year check).
+- Boundary: Must not be immediately preceded or followed by alphanumeric characters.
+- Context: Must be in a line containing an IPv4 address.
+- Occurrence: If multiple dates exist, match only the last one.</known>
+</visible>
+<log>
+<error path="log://turn_1/error/Response%20empty%20-%20Update%20with%20status%20500%20if%20unable%20to%20fulfill%20request." status="422" outcome="status:422" lines="2" tokens="4"># error
+Response empty - Update with status 500 if unable to fulfill request.</error>
+<set path="log://turn_2/set/unknown%3A//regex/date_pattern" target="unknown://regex/date_pattern" status="200" summary="regex,date,pattern,validation" lines="1" tokens="0"># set unknown://regex/date_pattern 0→33 tokens
+<<<<<<< SEARCH
+=======
+Pattern for YYYY-MM-DD (Feb 29 allowed) and boundary constraints.
+>>>>>>> REPLACE</set>
+<set path="log://turn_2/set/unknown%3A//regex/ipv4_pattern" target="unknown://regex/ipv4_pattern" status="200" summary="regex,ipv4,pattern,validation" lines="1" tokens="0"># set unknown://regex/ipv4_pattern 0→32 tokens
+<<<<<<< SEARCH
+=======
+Pattern for IPv4 without leading zeros and boundary constraints.
+>>>>>>> REPLACE</set>
+<set path="log://turn_2/set/unknown%3A//regex/last_occurrence_logic" target="unknown://regex/last_occurrence_logic" status="200" summary="regex,logic,last_match" lines="1" tokens="0"># set unknown://regex/last_occurrence_logic 0→33 tokens
+<<<<<<< SEARCH
+=======
+Strategy to match only the last occurrence of a pattern in a line.
+>>>>>>> REPLACE</set>
+<set path="log://turn_2/set/unknown%3A//regex/line_context_logic" target="unknown://regex/line_context_logic" status="200" summary="regex,logic,context" lines="1" tokens="0"># set unknown://regex/line_context_logic 0→31 tokens
+<<<<<<< SEARCH
+=======
+How to match a date only if the line contains an IPv4 address.
+>>>>>>> REPLACE</set>
+<update path="log://turn_2/update/unknowns%20identified" status="145" lines="2" tokens="0"># update
+unknowns identified</update>
+<get path="log://turn_3/get/prompt%3A//1" target="prompt://1" status="200" lines="19" tokens="235"># get prompt://1
+prompt://1 promoted</get>
+<set path="log://turn_3/set/known%3A//regex/date_pattern" target="known://regex/date_pattern" status="200" summary="regex,date,pattern,validation" lines="13" tokens="8"># set known://regex/date_pattern 0→280 tokens
+<<<<<<< SEARCH
+=======
+# Related
+[prompt](prompt://1)
+[unknown resolving](unknown://regex/date_pattern)
+[unknown resolving](unknown://regex/ipv4_pattern)
+[unknown resolving](unknown://regex/last_occurrence_logic)
+[unknown resolving](unknown://regex/line_context_logic)
+
+# Date Pattern Requirements
+- Format: `YYYY-MM-DD`
+- February: Up to 29 days allowed (no leap year check).
+- Boundary: Must not be immediately preceded or followed by alphanumeric characters.
+- Context: Must be in a line containing an IPv4 address.
+- Occurrence: If multiple dates exist, match only the last one.
+>>>>>>> REPLACE</set>
+<update path="log://turn_3/update/discovering%20and%20distilling%20more%20for%20the%20selected%20unknown" status="155" lines="2" tokens="0"># update
+discovering and distilling more for the selected unknown</update>
+<error path="log://turn_4/error/Response%20empty%20-%20Update%20with%20status%20500%20if%20unable%20to%20fulfill%20request." status="422" outcome="status:422" lines="2" tokens="4"># error
+Response empty - Update with status 500 if unable to fulfill request.</error>
+</log>
+<unknowns>
+<unknown path="unknown://regex/date_pattern" turn="2" summary="regex,date,pattern,validation" visibility="summarized" tokens="0">Pattern for YYYY-MM-DD (Feb 29 allowed) and boundary constraints.</unknown>
+<unknown path="unknown://regex/ipv4_pattern" turn="2" summary="regex,ipv4,pattern,validation" visibility="summarized" tokens="0">Pattern for IPv4 without leading zeros and boundary constraints.</unknown>
+<unknown path="unknown://regex/last_occurrence_logic" turn="2" summary="regex,logic,last_match" visibility="summarized" tokens="0">Strategy to match only the last occurrence of a pattern in a line.</unknown>
+<unknown path="unknown://regex/line_context_logic" turn="2" summary="regex,logic,context" visibility="summarized" tokens="0">How to match a date only if the line contains an IPv4 address.</unknown>
+</unknowns>
+<budget tokenUsage="1458" tokensFree="13287">
+| scheme | vis | sum | cost | if-all-sum | premium |
+|---|---|---|---|---|---|
+| log | 10 | 0 | 774 | 286 | 488 |
+| known | 1 | 0 | 280 | 272 | 8 |
+| prompt | 0 | 1 | 275 | 275 | 0 |
+| unknown | 0 | 4 | 129 | 129 | 0 |
+
+Columns:
+- cost: current cost of this scheme (vTokens for visible + sTokens for summarized)
+- if-all-sum: cost if every entry of this scheme were demoted to summarized
+- premium: savings from demoting visible → summarized (cost − if-all-sum)
+System: 0 tokens (0% of budget).
+Total: 11 visible + 5 summarized entries; tokenUsage 1458 / ceiling 14745. 13287 tokens free.
+</budget>
+<instructions>
+# Discovery Stage: YOU MUST select an unknown:// entry, then discover its source entries and distill them into known:// entries
+
+YOU MUST create topical, taxonomized, and tagged known:// entries to resolve the selected unknown:// entry.
+YOU MUST reference all related source entries and prompts.
+YOU MUST ONLY populate known entries with promoted information, NOT from your own training data or opinion.
+YOU MUST immediately demote unknowns, source entries, prompts, and log events after they are distilled, irrelevant, or resolved.
+
+Tip: Check the `tokens="N"` of the source entries against the `tokensFree="N"` constraint before promoting entries.
+Tip: You can use <get path="..." manifest/> to list paths and their token amounts for bulk operations without performing them.
+Tip: You can use <get path="..." line="X" limit="Y"/> to read subsets of entries that would exceed your `tokensFree` budget.
+
+Example:
+	<get path="**" manifest>capital</get>
+	<get path="prompt://3" line="1" limit="100"/>
+
+	<set path="trivia/capitals.csv" visibility="visible"/>
+
+	<set path="known://countries/france/capital" summary="countries,france,capital,geography,trivia">
+		# Related
+		[trivia question](prompt://3)
+		[unknown resolving](unknown://countries/france/capital)
+		[source entry](trivia/capitals.csv)
+
+		# Capital of France
+		The capital of France is Paris.
+
+		{...}
+	</set>
+
+	<set path="prompt://3" visibility="summarized"/>
+	<set path="unknown://countries/france/capital" visibility="summarized"/>
+	<set path="unknown://countries/france/seat_of_government" summary="RESOLVED: Not necessary" visibility="summarized"/>
+	<set path="trivia/capitals.csv" visibility="summarized"/>
+
+## Turn Termination (CHOOSE ONLY ONE):
+* Definition Stage Return: <update status="154">returning to Definition Stage</update>
+* Discovery Stage Continuation: <update status="155">discovering and distilling more for the selected unknown</update>
+* Discovery Stage Completion: <update status="156">this unknown's known entries written</update>
+</instructions>
+<prompt mode="act" path="prompt://1" commands="think,get,set,env,sh,rm,cp,mv,update" visibility="summarized" tokens="235" lines="19">Write a regex expression that matches dates in the format YYYY-MM-DD appearing in lines that contain an IPv4 address in a log file.
+If multiple dates are present in a line, the regex should match only the last date in that line.
+Assume that February can have up to 29 days in all years, without distinguishing leap years from non-leap years.
+IPv4 addresses use normal decimal notation without leading zeros in each octet.
+
+Note: Be careful that there might be text in the log that looks similar to da
+[truncated — promote to see the complete prompt]</prompt>
+
+--- ASSISTANT ---
+<think>
+The user wants to resolve the remaining unknown entries related to the regex components.
+I have already distilled `known://regex/date_pattern`.
+The remaining unknowns are:
+- `unknown://regex/ipv4_pattern`
+- `unknown://regex/last_occurrence_logic`
+- `unknown://regex/line_context_logic`
+
+I will start by resolving `unknown://regex/ipv4_pattern`.
+I need to see the full prompt `prompt://1` to ensure I have all the details for the IPv4 pattern.
+Then I will create `known://regex/ipv4_pattern` and demote the others.
+</think><get path="prompt://1"/><set path="known://regex/ipv4_pattern" summary="regex,ipv4,pattern,validation"># Related
+[prompt](prompt://1)
+[unknown resolving](unknown://regex/ipv4_pattern)
+
+# IPv4 Pattern Requirements
+- Format: Four octets separated by dots.
+- Notation: Normal decimal notation.
+- Constraint: No leading zeros in each octet.
+- Boundary: Must be bounded by non-alphanumeric characters or line boundaries.</set><set path="prompt://1" visibility="summarized"/><set path="unknown://regex/ipv4_pattern" visibility="summarized"/><set path="unknown://regex/last_occurrence_logic" visibility="summarized"/><set path="unknown://regex/line_context_logic" visibility="summarized"/><update status="155">discovering and distilling more for the selected unknown</update>
+
+--- REASONING ---
+The user wants to resolve the unknown entries related to regex patterns for dates and IPv4 addresses.
+The current stage is **Discovery Stage**.
+I have already distilled `known://regex/date_pattern` in the previous turn (based on the log).
+Wait, looking at the log, `known://regex/date_pattern` was set in turn 3.
+The `unknowns` section shows:
+- `unknown://regex/date_pattern` (Wait, the log says it was set to `known://regex/date_pattern`, but it's still in `unknowns`? Ah, the log shows `set known://regex/date_pattern` but the `unknowns` section still lists it. This might be a state sync issue or I need to demote it).
+- `unknown://regex/ipv4_pattern`
+- `unknown://regex/last_occurrence_logic`
+- `unknown://regex/line_context_logic`
+
+Actually, the `known://regex/date_pattern` entry in the `visible` section seems to contain the requirements.
+The requirements are:
+1. Format: `YYYY-MM-DD`
+2. February: Up to 29 days.
+3. Boundary: Not preceded/followed by alphanumeric.
+4. Context: Line must contain an IPv4 address.
+5. Occurrence: Match the *last* date in the line.
+
+I need to resolve the remaining unknowns: `ipv4_pattern`, `last_occurrence_logic`, and `line_context_logic`.
+However, the instructions say: "Select an unknown, discover relevant source entries and prompts, then distill them into known:// entries".
+The prompt `prompt://1` contains the full requirements. I have already used it to create `known://regex/date_pattern`.
+
+Let's look at the `unknowns` again.
+`unknown://regex/date_pattern` is listed in `unknowns` but also appears in `visible` as `known://regex/date_pattern`. This is confusing.
+Wait, the `log` shows:
+`<set path="log://turn_3/set/known%3A//regex/date_pattern" target="known://regex/date_pattern" ...>`
+And the `visible` section shows:
+`<known path="known://regex/date_pattern" ...>`
+
+It seems `known://regex/date_pattern` is already created.
+I should probably resolve the others.
+The goal is to write a single regex expression.
+The unknowns are components of the final regex.
+
+Let's check the prompt again.
+`prompt://1` is the source.
+I need to find the regex for:
+1. IPv4 pattern.
+2. Last occurrence logic.
+3. Line context logic.
+
+Since I am in the Discovery Stage, I should pick an unknown and find its "source".
+The source is `prompt://1`.
+I will pick `unknown://regex/ipv4_pattern`.
+
+Wait, the instructions say: "You MUST select an unknown, discover relevant source entries and prompts, then distill them into known:// entries".
+I will pick `unknown://regex/ipv4_pattern`.
+I will use `prompt://1` to get the details for IPv4.
+
+Actually, I can probably distill all of them into one or more `known://` entries that eventually lead to the final regex.
+But the prompt asks for *a* regex expression.
+
+Let's try to resolve `unknown://regex/ipv4_pattern`.
+I'll promote `prompt://1` (already done in turn 3, it's summarized).
+I'll create `known://regex/ipv4_pattern`.
+
+Wait, the prompt is `prompt://1`. It's already summarized.
+I'll promote it to see the full content if needed, but I can see the truncated part.
+The truncated part says: "Note: Be careful that there might be text in the log that looks similar to da..."
+
+Let's check the requirements for IPv4:
+"IPv4 addresses use normal decimal notation without leading zeros in each octet."
+Regex for IPv4: `(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)`
+But the prompt says "without leading zeros".
+Standard IPv4 regex often allows leading zeros. "Without leading zeros" means `25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9]?[0-9]`.
+Actually, the requirement is "without leading zeros in each octet".
+So `[0-9]|[1-9][0-9]{0,2}`? No.
+An octet can be `0` to `255`.
+Without leading zeros:
+`0` -> `0`
+`10` -> `10`
+`010` -> not allowed.
+So for each octet: `(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9]?[0-9])`.
+Wait, `1[0-9][0-9]` covers 100-199. `[1-9]?[0-9]` covers 0-99.
+So `(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9][0-9]|[0-9])`.
+Actually, `(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9][0-9]|[0-9])` is a way to say it.
+Wait, `[1-9]?[0-9]` covers 0-99.
+If we want to exclude leading zeros:
+An octet is `0` OR `[1-9][0-9]{0,2}` where the value is <= 255.
+Actually, the simplest way to express "no leading zeros" for a number 0-255 is:
+`25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9][0-9]|[0-9]`
+Let's test:
+`0` -> matches `[0-9]`
+`10` -> matches `[1-9][0-9]`
+`100` -> matches `1[0-9][0-9]`
+`01` -> does not match `[1-9][0-9]` or `[0-9]`? No, `[0-9]` matches `0`. But `01` would be `0` followed by `1`.
+If the regex is applied to the whole string, we need boundaries.
+
+Anyway, I need to create `known://regex/ipv4_pattern`.
+
+Let's look at the `unknowns` again.
+I'll pick `unknown://regex/ipv4_pattern`.
+
+Plan:
+1. Promote `prompt://1` (it's already summarized, I'll use `get` to see full content).
+2. Create `known://regex/ipv4_pattern`.
+3. Demote `prompt://1` and `unknown://regex/ipv4_pattern`.
+
+Wait, the instruction says: "You MUST immediately demote unknowns, source entries, prompts, and log events after they are distilled, irrelevant, or resolved."
+
+Let's check the `tokensFree`.
+`prompt://1` is 235 tokens.
+`unknown://regex/ipv4_pattern` is 32 tokens.
+`known://regex/date_pattern` is 8 tokens.
+
+I will first get the full prompt.
+
+--- USAGE ---
+{"completion_tokens":2101,"prompt_tokens":4058,"total_tokens":6159,"prompt_tokens_details":{"cached_tokens":2779}}