@possumtech/rummy 2.0.1 → 2.1.0

package/turns/cli_1777465095132/turn_002.txt

@@ -0,0 +1,236 @@
+
+============================================================
+TURN 2 — model=gemma run=cli_1777465095132
+============================================================
+
+--- SYSTEM ---
+XML Commands Available: <think/>, <get/>, <set/>, <env/>, <sh/>, <rm/>, <cp/>, <mv/>, <update/>
+
+# FCRM State Machine
+
+You are a Folksonomic Context Relevance Maximization (FCRM) State Machine.
+
+YOU MUST ONLY perform the actions corresponding with your current stage:
+* Definition Stage: Defining what's unknown into unknown:// entries
+* Discovery Stage: Selecting an unknown, discovering relevant source entries and prompts, then distilling them into known:// entries
+* Demotion Stage: Demoting the unknown entries, source entries, prompts, and log events after distillation is completed
+* Deployment Stage: Acting on the current prompt
+* Resolution Stage: Evaluation of context relevance maximization, state machine compliance, and prompt resolution.
+
+## Visibility States: Promote and Demote Visibility State to Control Context Relevance
+* visible: Fully visible, but uses `tokens="N"` context budget
+* summarized: Approximate, summary information, very small context budget penalty
+* archived: Hidden from Context, but can be retrieved later with <get path="..."/>
+
+Tip: You can leverage the FCRM's Visibility States with folksonomic taxonomies and tags to store and recall unlimited information.
+Tip: When an entry is "visible", it will appear in both the summarized and visible sections.
+Tip: The `tokens="N"` shows how much context memory is consumed if "visible". Entries only consume tokens when at "visible" visibility.
+
+YOU MUST NOT allow the `tokens="N"` sum of irrelevant source entries, prompts, or log events to exceed `tokensFree` budget.
+YOU MUST NOT skip or avoid state machine steps or the Resolution Stage will fail.
+
+# Commands
+
+YOU MUST NOT use shell commands for project file operations. Project files are entries that require XML Commands.
+Example: <set path="projectFile.txt">new file content</set>
+Example: <get path="src/*.txt" manifest/>
+
+Tip: Project files, entries, prompts, and log events are all accessible with the XML Commands. If there's no `{scheme}://` prefix, it's a repo file path.
+
+## <think>[reasoning]</think> - Think before acting
+
+* Use <think></think> before any other tools to plan your approach
+
+* Reasoning inside <think></think> is private — it does not appear in your context
+
+## <get path="[path/to/file]"/> - Promote an entry
+
+Example: <get path="src/app.js"/>
+
+Example: <get path="known://*">auth</get>
+
+Example: <get path="src/**/*.js">authentication</get>
+
+Example: <get path="src/**/*.js" manifest>authentication</get>
+
+Example: <get path="src/agent/AgentLoop.js" line="644" limit="80"/>
+
+Example: <get path="sh://turn_3/npm_test_1" line="-50"/>
+
+Example: <get path="https://en.wikipedia.org/wiki/Long_Page" line="1" limit="200"/>
+
+* Paths accept patterns: `src/**/*.js`, `known://api_*`
+
+* Body text filters results by content match (can use glob, regex, jsonpath, or xpath patterns)
+
+* `line` and `limit` read a slice without promoting the entry, which costs as many tokens as the slice contains. Negative `line` reads from the end (tail).
+
+* `manifest` lists the paths and their token amounts instead of performing the operation; useful for bulk and pattern matching tasks.
+
+* Remember to <set path="..." visibility="summarize"/> when entries or log events are no longer relevant.
+
+## <set path="[path/to/file]">[content or edit]</set> - Create, edit, or update a file or entry
+
+Example: <set path="known://project/milestones" visibility="summarized" summary="milestone,deadline,2026"/>
+
+Example: <set path="src/app.js">
+<<<<<<< SEARCH
+old text
+=======
+new text
+>>>>>>> REPLACE
+</set>
+
+Example: <set path="src/config.js">s/port = 3000/port = 8080/g;s/We're almost done/We're done./g;</set>
+
+Example: <set path="example.md">Full file content here</set>
+
+* YOU MUST NOT use <sh></sh> or <env></env> to list, create, read, or edit files — use <get></get> and <set></set>
+
+## <env>[command]</env> - Run an exploratory shell command
+
+Example: <env>npm --version</env>
+
+Example: <env>git log --oneline -5</env>
+
+* YOU MUST NOT use <env></env> to read or list files — use <get path="*"/> instead
+
+* YOU MUST NOT use <env></env> for commands with side effects
+
+## <sh>[command]</sh> - Run a shell command with side effects
+
+Example: <sh>npm install express</sh>
+
+Example: <sh>npm test</sh>
+
+* YOU MUST NOT use <sh></sh> to read, create, or edit files — use <get></get> and <set></set>
+
+* YOU MUST use <env></env> for commands without side effects
+
+## <rm path="[path]"/> - Remove a file or entry
+
+Example: <rm path="src/config.js"/>
+
+Example: <rm path="known://temp_*" manifest/>
+
+* Permanent. Prefer <set path="..." visibility="archived"/> to preserve for later retrieval
+
+* `manifest` lists what paths would be affected without performing the operation.
+
+## <cp path="[source]">[destination]</cp> - Copy a file or entry
+
+Example: <cp path="src/config.js">src/config.backup.js</cp>
+
+Example: <cp path="known://plan_*">known://archive_</cp>
+
+## <mv path="[source]">[destination]</mv> - Move or rename a file or entry
+
+Example: <mv path="known://active_task">known://completed_task</mv>
+
+Example: <mv path="src/old_name.js">src/new_name.js</mv>
+
+Example: <mv path="known://project/*" visibility="summarized"/>
+
+## <update status="N">{brief status}</update> - Status report (exactly one per turn, at the end)
+
+REQUIRED: the valid values of N are defined by your current stage instructions.
+
+REQUIRED: YOU MUST keep <update></update> body to <= 80 characters.
+
+
+--- USER ---
+<log>
+<error path="log://turn_1/error/Response%20empty%20-%20Update%20with%20status%20500%20if%20unable%20to%20fulfill%20request." status="422" outcome="status:422" lines="2" tokens="4"># error
+Response empty - Update with status 500 if unable to fulfill request.</error>
+</log>
+<budget tokenUsage="549" tokensFree="14196">
+| scheme | vis | sum | cost | if-all-sum | premium |
+|---|---|---|---|---|---|
+| prompt | 1 | 0 | 510 | 275 | 235 |
+| log | 1 | 0 | 39 | 35 | 4 |
+
+Columns:
+- cost: current cost of this scheme (vTokens for visible + sTokens for summarized)
+- if-all-sum: cost if every entry of this scheme were demoted to summarized
+- premium: savings from demoting visible → summarized (cost − if-all-sum)
+System: 0 tokens (0% of budget).
+Total: 2 visible + 0 summarized entries; tokenUsage 549 / ceiling 14745. 14196 tokens free.
+</budget>
+<instructions>
+# Definition Stage: YOU MUST ONLY create topical, taxonomized, and tagged unknown:// entries for missing information
+
+Example: <set path="unknown://countries/france/capital" summary="countries,france,capital,geography,trivia">What is the capital of France?</set>
+
+## Turn Termination:
+* Definition Stage Completion: <update status="145">unknowns identified</update>
+</instructions>
+<prompt mode="act" path="prompt://1" commands="think,get,set,env,sh,rm,cp,mv,update" visibility="visible" tokens="235" lines="19">Write a regex expression that matches dates in the format YYYY-MM-DD appearing in lines that contain an IPv4 address in a log file.
+If multiple dates are present in a line, the regex should match only the last date in that line.
+Assume that February can have up to 29 days in all years, without distinguishing leap years from non-leap years.
+IPv4 addresses use normal decimal notation without leading zeros in each octet.
+
+Note: Be careful that there might be text in the log that looks similar to dates or IPv4 addresses but is not (e.g., user 1134-12-1234). 
+To avoid false matches, ensure that valid dates and IPv4 addresses are not immediately preceded or followed by alphanumeric characters.
+
+Save your regex in /app/regex.txt
+The regex will be read from the file and applied to the log file contents using Python's re.findall with the re.MULTILINE flag.
+Example Python usage:
+```
+import re
+
+with open("/app/regex.txt") as f:
+    pattern = f.read().strip()
+
+matches = re.findall(pattern, log_text, re.MULTILINE)
+```</prompt>
+
+--- ASSISTANT ---
+<think>
+The user wants a regex that matches the last `YYYY-MM-DD` date on a line, provided that the line also contains an IPv4 address. The regex must avoid false positives by ensuring no alphanumeric characters surround the date or the IPv4 address.
+
+I need to define the components of this regex and the logic for "last occurrence" and "line containing IPv4".
+
+Unknowns:
+1. `unknown://regex/ipv4_pattern`: Pattern for IPv4 (no leading zeros, boundary constraints).
+2. `unknown://regex/date_pattern`: Pattern for YYYY-MM-DD (Feb 29 allowed, boundary constraints).
+3. `unknown://regex/last_occurrence_logic`: Strategy to match only the last date in a line using a single regex with `re.findall`.
+4. `unknown://regex/line_context_logic`: How to ensure the line contains an IPv4 while the match itself is the date.
+</think><set path="unknown://regex/ipv4_pattern" summary="regex,ipv4,pattern,validation">Pattern for IPv4 without leading zeros and boundary constraints.</set><set path="unknown://regex/date_pattern" summary="regex,date,pattern,validation">Pattern for YYYY-MM-DD (Feb 29 allowed) and boundary constraints.</set><set path="unknown://regex/last_occurrence_logic" summary="regex,logic,last_match">Strategy to match only the last occurrence of a pattern in a line.</set><set path="unknown://regex/line_context_logic" summary="regex,logic,context">How to match a date only if the line contains an IPv4 address.</set><update status="145">unknowns identified</update>
+
+--- REASONING ---
+The user wants a regex that matches `YYYY-MM-DD` dates in lines containing an IPv4 address.
+Constraints:
+1.  Format: `YYYY-MM-DD`.
+2.  Constraint: Match only the *last* date in a line if multiple exist.
+3.  Date validation: February can have up to 29 days.
+4.  IPv4: Normal decimal notation, no leading zeros.
+5.  False Positives: Avoid alphanumeric characters immediately preceding or following the date or the IPv4 address.
+6.  Output: Save to `/app/regex.txt`.
+7.  Environment: Python `re.findall` with `re.MULTILINE`.
+
+Missing Information/Unknowns:
+- What constitutes a "line" in the context of the log file? (Usually `\n` delimited).
+- How to ensure "only the last date" is matched using a single regex with `re.findall`? `re.findall` returns all non-overlapping matches. If I want the *last* one in a line, I might need to use lookaheads or structure the regex to consume everything up to the last date.
+- The "no alphanumeric characters" constraint: This implies word boundaries `\b` or specific lookaround assertions like `(?<![a-zA-Z0-9])` and `(?![a-zA-Z0-9])`.
+
+Let's define the unknowns.
+
+1.  `unknown://regex/last_date_logic`: How to structure a regex to pick the last occurrence of a pattern in a line when using `re.findall`.
+2.  `unknown://regex/ipv4_pattern`: A robust pattern for IPv4 without leading zeros and with boundary constraints.
+3.  `unknown://regex/date_pattern`: A pattern for `YYYY-MM-DD` with the specific day/month constraints (Feb 29) and boundary constraints.
+4.  `unknown://regex/combined_logic`: How to combine the IPv4 presence requirement with the date matching requirement in a single regex that works with `re.findall`.
+
+Wait, the prompt says: "Write a regex expression that matches dates... appearing in lines that contain an IPv4 address".
+This sounds like the regex itself must validate the line contains an IPv4.
+If the regex is applied to the whole log text with `re.MULTILINE`, a single regex must:
+1.  Match a line.
+2.  Ensure the line contains an IPv4.
+3.  Capture the last date in that line.
+
+Actually, `re.findall` returns the captured groups or the whole match. If I want to "match dates", the match itself should be the date.
+If I use a pattern like `^.*(IPv4_PATTERN).*?(DATE_PATTERN)(?![^ \n]*DATE_PATTERN).*$` it might work, but `re.findall` with `re.MULTILINE` treats `^` and `$` as start/end of lines.
+
+Let's refine the unknowns.
+
+--- USAGE ---
+{"completion_tokens":1040,"prompt_tokens":2186,"total_tokens":3226,"prompt_tokens_details":{"cached_tokens":1460}}

package/turns/cli_1777465095132/turn_003.txt

@@ -0,0 +1,287 @@
+
+============================================================
+TURN 3 — model=gemma run=cli_1777465095132
+============================================================
+
+--- SYSTEM ---
+XML Commands Available: <think/>, <get/>, <set/>, <env/>, <sh/>, <rm/>, <cp/>, <mv/>, <update/>
+
+# FCRM State Machine
+
+You are a Folksonomic Context Relevance Maximization (FCRM) State Machine.
+
+YOU MUST ONLY perform the actions corresponding with your current stage:
+* Definition Stage: Defining what's unknown into unknown:// entries
+* Discovery Stage: Selecting an unknown, discovering relevant source entries and prompts, then distilling them into known:// entries
+* Demotion Stage: Demoting the unknown entries, source entries, prompts, and log events after distillation is completed
+* Deployment Stage: Acting on the current prompt
+* Resolution Stage: Evaluation of context relevance maximization, state machine compliance, and prompt resolution.
+
+## Visibility States: Promote and Demote Visibility State to Control Context Relevance
+* visible: Fully visible, but uses `tokens="N"` context budget
+* summarized: Approximate, summary information, very small context budget penalty
+* archived: Hidden from Context, but can be retrieved later with <get path="..."/>
+
+Tip: You can leverage the FCRM's Visibility States with folksonomic taxonomies and tags to store and recall unlimited information.
+Tip: When an entry is "visible", it will appear in both the summarized and visible sections.
+Tip: The `tokens="N"` shows how much context memory is consumed if "visible". Entries only consume tokens when at "visible" visibility.
+
+YOU MUST NOT allow the `tokens="N"` sum of irrelevant source entries, prompts, or log events to exceed `tokensFree` budget.
+YOU MUST NOT skip or avoid state machine steps or the Resolution Stage will fail.
+
+# Commands
+
+YOU MUST NOT use shell commands for project file operations. Project files are entries that require XML Commands.
+Example: <set path="projectFile.txt">new file content</set>
+Example: <get path="src/*.txt" manifest/>
+
+Tip: Project files, entries, prompts, and log events are all accessible with the XML Commands. If there's no `{scheme}://` prefix, it's a repo file path.
+
+## <think>[reasoning]</think> - Think before acting
+
+* Use <think></think> before any other tools to plan your approach
+
+* Reasoning inside <think></think> is private — it does not appear in your context
+
+## <get path="[path/to/file]"/> - Promote an entry
+
+Example: <get path="src/app.js"/>
+
+Example: <get path="known://*">auth</get>
+
+Example: <get path="src/**/*.js">authentication</get>
+
+Example: <get path="src/**/*.js" manifest>authentication</get>
+
+Example: <get path="src/agent/AgentLoop.js" line="644" limit="80"/>
+
+Example: <get path="sh://turn_3/npm_test_1" line="-50"/>
+
+Example: <get path="https://en.wikipedia.org/wiki/Long_Page" line="1" limit="200"/>
+
+* Paths accept patterns: `src/**/*.js`, `known://api_*`
+
+* Body text filters results by content match (can use glob, regex, jsonpath, or xpath patterns)
+
+* `line` and `limit` read a slice without promoting the entry, which costs as many tokens as the slice contains. Negative `line` reads from the end (tail).
+
+* `manifest` lists the paths and their token amounts instead of performing the operation; useful for bulk and pattern matching tasks.
+
+* Remember to <set path="..." visibility="summarize"/> when entries or log events are no longer relevant.
+
+## <set path="[path/to/file]">[content or edit]</set> - Create, edit, or update a file or entry
+
+Example: <set path="known://project/milestones" visibility="summarized" summary="milestone,deadline,2026"/>
+
+Example: <set path="src/app.js">
+<<<<<<< SEARCH
+old text
+=======
+new text
+>>>>>>> REPLACE
+</set>
+
+Example: <set path="src/config.js">s/port = 3000/port = 8080/g;s/We're almost done/We're done./g;</set>
+
+Example: <set path="example.md">Full file content here</set>
+
+* YOU MUST NOT use <sh></sh> or <env></env> to list, create, read, or edit files — use <get></get> and <set></set>
+
+## <env>[command]</env> - Run an exploratory shell command
+
+Example: <env>npm --version</env>
+
+Example: <env>git log --oneline -5</env>
+
+* YOU MUST NOT use <env></env> to read or list files — use <get path="*"/> instead
+
+* YOU MUST NOT use <env></env> for commands with side effects
+
+## <sh>[command]</sh> - Run a shell command with side effects
+
+Example: <sh>npm install express</sh>
+
+Example: <sh>npm test</sh>
+
+* YOU MUST NOT use <sh></sh> to read, create, or edit files — use <get></get> and <set></set>
+
+* YOU MUST use <env></env> for commands without side effects
+
+## <rm path="[path]"/> - Remove a file or entry
+
+Example: <rm path="src/config.js"/>
+
+Example: <rm path="known://temp_*" manifest/>
+
+* Permanent. Prefer <set path="..." visibility="archived"/> to preserve for later retrieval
+
+* `manifest` lists what paths would be affected without performing the operation.
+
+## <cp path="[source]">[destination]</cp> - Copy a file or entry
+
+Example: <cp path="src/config.js">src/config.backup.js</cp>
+
+Example: <cp path="known://plan_*">known://archive_</cp>
+
+## <mv path="[source]">[destination]</mv> - Move or rename a file or entry
+
+Example: <mv path="known://active_task">known://completed_task</mv>
+
+Example: <mv path="src/old_name.js">src/new_name.js</mv>
+
+Example: <mv path="known://project/*" visibility="summarized"/>
+
+## <update status="N">{brief status}</update> - Status report (exactly one per turn, at the end)
+
+REQUIRED: the valid values of N are defined by your current stage instructions.
+
+REQUIRED: YOU MUST keep <update></update> body to <= 80 characters.
+
+
+--- USER ---
+<log>
+<error path="log://turn_1/error/Response%20empty%20-%20Update%20with%20status%20500%20if%20unable%20to%20fulfill%20request." status="422" outcome="status:422" lines="2" tokens="4"># error
+Response empty - Update with status 500 if unable to fulfill request.</error>
+<set path="log://turn_2/set/unknown%3A//regex/date_pattern" target="unknown://regex/date_pattern" status="200" summary="regex,date,pattern,validation" lines="1" tokens="0"># set unknown://regex/date_pattern 0→33 tokens
+<<<<<<< SEARCH
+=======
+Pattern for YYYY-MM-DD (Feb 29 allowed) and boundary constraints.
+>>>>>>> REPLACE</set>
+<set path="log://turn_2/set/unknown%3A//regex/ipv4_pattern" target="unknown://regex/ipv4_pattern" status="200" summary="regex,ipv4,pattern,validation" lines="1" tokens="0"># set unknown://regex/ipv4_pattern 0→32 tokens
+<<<<<<< SEARCH
+=======
+Pattern for IPv4 without leading zeros and boundary constraints.
+>>>>>>> REPLACE</set>
+<set path="log://turn_2/set/unknown%3A//regex/last_occurrence_logic" target="unknown://regex/last_occurrence_logic" status="200" summary="regex,logic,last_match" lines="1" tokens="0"># set unknown://regex/last_occurrence_logic 0→33 tokens
+<<<<<<< SEARCH
+=======
+Strategy to match only the last occurrence of a pattern in a line.
+>>>>>>> REPLACE</set>
+<set path="log://turn_2/set/unknown%3A//regex/line_context_logic" target="unknown://regex/line_context_logic" status="200" summary="regex,logic,context" lines="1" tokens="0"># set unknown://regex/line_context_logic 0→31 tokens
+<<<<<<< SEARCH
+=======
+How to match a date only if the line contains an IPv4 address.
+>>>>>>> REPLACE</set>
+<update path="log://turn_2/update/unknowns%20identified" status="145" lines="2" tokens="0"># update
+unknowns identified</update>
+</log>
+<unknowns>
+<unknown path="unknown://regex/date_pattern" turn="2" summary="regex,date,pattern,validation" visibility="visible" tokens="0">Pattern for YYYY-MM-DD (Feb 29 allowed) and boundary constraints.</unknown>
+<unknown path="unknown://regex/ipv4_pattern" turn="2" summary="regex,ipv4,pattern,validation" visibility="visible" tokens="0">Pattern for IPv4 without leading zeros and boundary constraints.</unknown>
+<unknown path="unknown://regex/last_occurrence_logic" turn="2" summary="regex,logic,last_match" visibility="visible" tokens="0">Strategy to match only the last occurrence of a pattern in a line.</unknown>
+<unknown path="unknown://regex/line_context_logic" turn="2" summary="regex,logic,context" visibility="visible" tokens="0">How to match a date only if the line contains an IPv4 address.</unknown>
+</unknowns>
+<budget tokenUsage="1001" tokensFree="13744">
+| scheme | vis | sum | cost | if-all-sum | premium |
+|---|---|---|---|---|---|
+| prompt | 1 | 0 | 510 | 275 | 235 |
+| log | 6 | 0 | 362 | 178 | 184 |
+| unknown | 4 | 0 | 129 | 129 | 0 |
+
+Columns:
+- cost: current cost of this scheme (vTokens for visible + sTokens for summarized)
+- if-all-sum: cost if every entry of this scheme were demoted to summarized
+- premium: savings from demoting visible → summarized (cost − if-all-sum)
+System: 0 tokens (0% of budget).
+Total: 11 visible + 0 summarized entries; tokenUsage 1001 / ceiling 14745. 13744 tokens free.
+</budget>
+<instructions>
+# Discovery Stage: YOU MUST select an unknown:// entry, then discover its source entries and distill them into known:// entries
+
+YOU MUST create topical, taxonomized, and tagged known:// entries to resolve the selected unknown:// entry.
+YOU MUST reference all related source entries and prompts.
+YOU MUST ONLY populate known entries with promoted information, NOT from your own training data or opinion.
+YOU MUST immediately demote unknowns, source entries, prompts, and log events after they are distilled, irrelevant, or resolved.
+
+Tip: Check the `tokens="N"` of the source entries against the `tokensFree="N"` constraint before promoting entries.
+Tip: You can use <get path="..." manifest/> to list paths and their token amounts for bulk operations without performing them.
+Tip: You can use <get path="..." line="X" limit="Y"/> to read subsets of entries that would exceed your `tokensFree` budget.
+
+Example:
+	<get path="**" manifest>capital</get>
+	<get path="prompt://3" line="1" limit="100"/>
+
+	<set path="trivia/capitals.csv" visibility="visible"/>
+
+	<set path="known://countries/france/capital" summary="countries,france,capital,geography,trivia">
+		# Related
+		[trivia question](prompt://3)
+		[unknown resolving](unknown://countries/france/capital)
+		[source entry](trivia/capitals.csv)
+
+		# Capital of France
+		The capital of France is Paris.
+
+		{...}
+	</set>
+
+	<set path="prompt://3" visibility="summarized"/>
+	<set path="unknown://countries/france/capital" visibility="summarized"/>
+	<set path="unknown://countries/france/seat_of_government" summary="RESOLVED: Not necessary" visibility="summarized"/>
+	<set path="trivia/capitals.csv" visibility="summarized"/>
+
+## Turn Termination (CHOOSE ONLY ONE):
+* Definition Stage Return: <update status="154">returning to Definition Stage</update>
+* Discovery Stage Continuation: <update status="155">discovering and distilling more for the selected unknown</update>
+* Discovery Stage Completion: <update status="156">this unknown's known entries written</update>
+</instructions>
+<prompt mode="act" path="prompt://1" commands="think,get,set,env,sh,rm,cp,mv,update" visibility="visible" tokens="235" lines="19">Write a regex expression that matches dates in the format YYYY-MM-DD appearing in lines that contain an IPv4 address in a log file.
+If multiple dates are present in a line, the regex should match only the last date in that line.
+Assume that February can have up to 29 days in all years, without distinguishing leap years from non-leap years.
+IPv4 addresses use normal decimal notation without leading zeros in each octet.
+
+Note: Be careful that there might be text in the log that looks similar to dates or IPv4 addresses but is not (e.g., user 1134-12-1234). 
+To avoid false matches, ensure that valid dates and IPv4 addresses are not immediately preceded or followed by alphanumeric characters.
+
+Save your regex in /app/regex.txt
+The regex will be read from the file and applied to the log file contents using Python's re.findall with the re.MULTILINE flag.
+Example Python usage:
+```
+import re
+
+with open("/app/regex.txt") as f:
+    pattern = f.read().strip()
+
+matches = re.findall(pattern, log_text, re.MULTILINE)
+```</prompt>
+
+--- ASSISTANT ---
+<think>
+I will select `unknown://regex/date_pattern` to begin the discovery process. I need to extract the specific regex requirements from `prompt://1` to resolve all related unknowns.
+</think><get path="prompt://1"/><set path="known://regex/date_pattern" visibility="visible" summary="regex,date,pattern,validation"># Related
+[prompt](prompt://1)
+[unknown resolving](unknown://regex/date_pattern)
+[unknown resolving](unknown://regex/ipv4_pattern)
+[unknown resolving](unknown://regex/last_occurrence_logic)
+[unknown resolving](unknown://regex/line_context_logic)
+
+# Date Pattern Requirements
+- Format: `YYYY-MM-DD`
+- February: Up to 29 days allowed (no leap year check).
+- Boundary: Must not be immediately preceded or followed by alphanumeric characters.
+- Context: Must be in a line containing an IPv4 address.
+- Occurrence: If multiple dates exist, match only the last one.
+</set><set path="prompt://1" visibility="summarized"/><set path="unknown://regex/date_pattern" visibility="summarized"/><set path="unknown://regex/ipv4_pattern" visibility="summarized"/><set path="unknown://regex/last_occurrence_logic" visibility="summarized"/><set path="unknown://regex/line_context_logic" visibility="summarized"/><update status="155">discovering and distilling more for the selected unknown</update>
+
+--- REASONING ---
+The user wants to resolve the unknown entries related to regex patterns for dates and IPv4 addresses.
+The prompt `prompt://1` contains the core requirements.
+
+Current unknowns:
+1. `unknown://regex/date_pattern`
+2. `unknown://regex/ipv4_pattern`
+3. `unknown://regex/last_occurrence_logic`
+4. `unknown://regex/line_context_logic`
+
+I will start by selecting `unknown://regex/date_pattern` and attempt to distill the requirements from `prompt://1` into known entries.
+
+Plan:
+1. Select `unknown://regex/date_pattern`.
+2. Get `prompt://1` to extract the logic for the date pattern, IPv4 pattern, and the context/occurrence logic.
+3. Create `known://regex/date_pattern`, `known://regex/ipv4_pattern`, `known://regex/last_occurrence_logic`, and `known://regex/line_context_logic`.
+4. Demote the prompt and the unknowns.
+
+Let's check the prompt content first.
+
+--- USAGE ---
+{"completion_tokens":565,"prompt_tokens":3320,"total_tokens":3885,"prompt_tokens_details":{"cached_tokens":1567}}