@pascal-app/nodes 1.0.3 → 1.0.5

package/dist/duct-fitting/tool.js

@@ -1,23 +1,23 @@
 'use client';
 import { jsx as _jsx, jsxs as _jsxs } from "react/jsx-runtime";
 import { DuctFittingNode, emitter, useScene } from '@pascal-app/core';
-import { CursorSphere, EDITOR_LAYER, isGridSnapActive, isMagneticSnapActive, triggerSFX, useEditor, useInteractionScope, } from '@pascal-app/editor';
+import { CursorSphere, EDITOR_LAYER, isGridSnapActive, isMagneticSnapActive, isTypingTarget, triggerSFX, useEditor, useInteractionScope, } from '@pascal-app/editor';
+import { alignDrawPoint, clearDrawAlignment, collectScenePorts, } from '@pascal-app/editor/distribution';
 import { useViewer } from '@pascal-app/viewer';
 import { Html } from '@react-three/drei';
 import { useEffect, useMemo, useRef, useState } from 'react';
 import { Euler, Mesh, Quaternion, Vector3 } from 'three';
-import { accessoryCursor } from '../shared/accessory-cursor';
-import { accessoryMateQuaternion, inheritFittingProfile, placeAccessPanel, } from '../shared/accessory-placement';
-import { findAccessoryPort, snapAccessoryPoint, subscribeAccessorySnapping, } from '../shared/accessory-snapping';
-import { ConnectionFeedback } from '../shared/connection-feedback';
-import { alignDrawPoint, clearDrawAlignment } from '../shared/draw-alignment';
-import { AXIS_VECTORS, cycleRotationAxis, getRotationAxis, ROTATE_STEP_RAD, } from '../shared/fitting-rotation';
-import { createFittingSurfaceSupport } from '../shared/fitting-surface-support';
-import { LevelOffsetGroup } from '../shared/level-offset-group';
-import { collectScenePorts, DUCT_PORT_SYSTEMS } from '../shared/ports';
-import { ductFittingDefinition } from './definition';
-import { buildDuctFittingGeometry } from './geometry';
-import { localFittingPorts } from './ports';
+import { accessoryCursor } from '../shared/accessory-cursor.js';
+import { accessoryMateQuaternion, inheritFittingProfile, placeAccessPanel, } from '../shared/accessory-placement.js';
+import { findAccessoryPort, snapAccessoryPoint, subscribeAccessorySnapping, } from '../shared/accessory-snapping.js';
+import { ConnectionFeedback } from '../shared/connection-feedback.js';
+import { AXIS_VECTORS, cycleRotationAxis, getRotationAxis, ROTATE_STEP_RAD, } from '../shared/fitting-rotation.js';
+import { createFittingSurfaceSupport } from '../shared/fitting-surface-support.js';
+import { LevelOffsetGroup } from '../shared/level-offset-group.js';
+import { DUCT_PORT_SYSTEMS } from '../shared/port-systems.js';
+import { ductFittingDefinition } from './definition.js';
+import { buildDuctFittingGeometry } from './geometry.js';
+import { localFittingPorts } from './ports.js';
 const PREVIEW_OPACITY = 0.55;
 /**
  * Resolve where the fitting would land for a cursor at `raw`:
@@ -208,8 +208,7 @@ const DuctFittingTool = () => {
             triggerSFX('sfx:item-place');
         };
         const onKeyDown = (e) => {
-            const tag = e.target?.tagName;
-            if (tag === 'INPUT' || tag === 'TEXTAREA')
+            if (isTypingTarget(e.target))
                 return;
             const key = e.key;
             if (key === 'r' || key === 'R' || key === 't' || key === 'T') {

package/dist/duct-segment/continuation.d.ts

@@ -1,7 +1,7 @@
 import { type AnyNode, type AnyNodeId, type DuctFittingNode, type FloorplanAffordance } from '@pascal-app/core';
-import { type RunContinuationHandlePlan } from '../shared/elbow-branch-continuation';
-import type { RunBodyHit, ScenePort } from '../shared/ports';
-import type { DuctSegmentNode } from './schema';
+import type { RunBodyHit, ScenePort } from '@pascal-app/editor/distribution';
+import { type RunContinuationHandlePlan } from '../shared/elbow-branch-continuation.js';
+import type { DuctSegmentNode } from './schema.js';
 export type DuctEndpoint = 'start' | 'end';
 export type DuctContinuationSeed = {
     duct: DuctSegmentNode;

package/dist/duct-segment/continuation.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"continuation.d.ts","sourceRoot":"","sources":["../../src/duct-segment/continuation.ts"],"names":[],"mappings":"AAAA,OAAO,EACL,KAAK,OAAO,EACZ,KAAK,SAAS,EACd,KAAK,eAAe,EACpB,KAAK,mBAAmB,EAEzB,MAAM,kBAAkB,CAAA;AAGzB,OAAO,EAIL,KAAK,yBAAyB,EAE/B,MAAM,qCAAqC,CAAA;AAC5C,OAAO,KAAK,EAAE,UAAU,EAAE,SAAS,EAAE,MAAM,iBAAiB,CAAA;AAE5D,OAAO,KAAK,EAAE,eAAe,EAAE,MAAM,UAAU,CAAA;AAE/C,MAAM,MAAM,YAAY,GAAG,OAAO,GAAG,KAAK,CAAA;AAE1C,MAAM,MAAM,oBAAoB,GAAG;IACjC,IAAI,EAAE,eAAe,CAAA;IACrB,IAAI,EAAE,SAAS,GAAG,IAAI,CAAA;IACtB,IAAI,EAAE,UAAU,GAAG,IAAI,CAAA;IACvB,eAAe,CAAC,EAAE,eAAe,CAAA;CAClC,CAAA;AAYD,wBAAgB,gBAAgB,CAAC,IAAI,EAAE,eAAe,EAAE,QAAQ,EAAE,YAAY,GAAG,SAAS,GAAG,IAAI,CAkBhG;AAED,wBAAgB,2BAA2B,CACzC,IAAI,EAAE,eAAe,EACrB,QAAQ,EAAE,YAAY,EACtB,GAAG,SAAO,GACT,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG,IAAI,CAQjC;AAED,wBAAgB,0BAA0B,CACxC,IAAI,EAAE,eAAe,EACrB,QAAQ,EAAE,YAAY,EACtB,KAAK,EAAE,QAAQ,CAAC,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,CAAC,EACxC,GAAG,SAAO,GACT,yBAAyB,GAAG,IAAI,CAGlC;AAED,wBAAgB,2BAA2B,CACzC,QAAQ,EAAE,OAAO,EACjB,KAAK,EAAE,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,GAC7B,oBAAoB,GAAG,IAAI,CAiD7B;AAED,wBAAgB,kBAAkB,CAChC,IAAI,EAAE,eAAe,EACrB,YAAY,EAAE,MAAM,EACpB,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAC9B,IAAI,CAmBN;AAED,wBAAgB,wBAAwB,CACtC,IAAI,EAAE,eAAe,EACrB,QAAQ,EAAE,YAAY,EACtB,SAAS,CAAC,EAAE,SAAS,GACpB,IAAI,CAiBN;AAED,eAAO,MAAM,0BAA0B,EAAE,mBAAmB,CAAC,eAAe,CAiB3E,CAAA;AAED,eAAO,MAAM,oBAAoB,EAAE,mBAAmB,CAAC,eAAe,CAiBrE,CAAA;AAED,wBAAgB,2BAA2B,IAAI,oBAAoB,GAAG,IAAI,CAKzE"}
+{"version":3,"file":"continuation.d.ts","sourceRoot":"","sources":["../../src/duct-segment/continuation.ts"],"names":[],"mappings":"AAAA,OAAO,EACL,KAAK,OAAO,EACZ,KAAK,SAAS,EACd,KAAK,eAAe,EACpB,KAAK,mBAAmB,EAEzB,MAAM,kBAAkB,CAAA;AAEzB,OAAO,KAAK,EAAE,UAAU,EAAE,SAAS,EAAE,MAAM,iCAAiC,CAAA;AAE5E,OAAO,EAIL,KAAK,yBAAyB,EAE/B,MAAM,qCAAqC,CAAA;AAE5C,OAAO,KAAK,EAAE,eAAe,EAAE,MAAM,UAAU,CAAA;AAE/C,MAAM,MAAM,YAAY,GAAG,OAAO,GAAG,KAAK,CAAA;AAE1C,MAAM,MAAM,oBAAoB,GAAG;IACjC,IAAI,EAAE,eAAe,CAAA;IACrB,IAAI,EAAE,SAAS,GAAG,IAAI,CAAA;IACtB,IAAI,EAAE,UAAU,GAAG,IAAI,CAAA;IACvB,eAAe,CAAC,EAAE,eAAe,CAAA;CAClC,CAAA;AAYD,wBAAgB,gBAAgB,CAAC,IAAI,EAAE,eAAe,EAAE,QAAQ,EAAE,YAAY,GAAG,SAAS,GAAG,IAAI,CAkBhG;AAED,wBAAgB,2BAA2B,CACzC,IAAI,EAAE,eAAe,EACrB,QAAQ,EAAE,YAAY,EACtB,GAAG,SAAO,GACT,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG,IAAI,CAQjC;AAED,wBAAgB,0BAA0B,CACxC,IAAI,EAAE,eAAe,EACrB,QAAQ,EAAE,YAAY,EACtB,KAAK,EAAE,QAAQ,CAAC,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,CAAC,EACxC,GAAG,SAAO,GACT,yBAAyB,GAAG,IAAI,CAGlC;AAED,wBAAgB,2BAA2B,CACzC,QAAQ,EAAE,OAAO,EACjB,KAAK,EAAE,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,GAC7B,oBAAoB,GAAG,IAAI,CAiD7B;AAED,wBAAgB,kBAAkB,CAChC,IAAI,EAAE,eAAe,EACrB,YAAY,EAAE,MAAM,EACpB,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAC9B,IAAI,CAmBN;AAED,wBAAgB,wBAAwB,CACtC,IAAI,EAAE,eAAe,EACrB,QAAQ,EAAE,YAAY,EACtB,SAAS,CAAC,EAAE,SAAS,GACpB,IAAI,CAiBN;AAED,eAAO,MAAM,0BAA0B,EAAE,mBAAmB,CAAC,eAAe,CAiB3E,CAAA;AAED,eAAO,MAAM,oBAAoB,EAAE,mBAAmB,CAAC,eAAe,CAiBrE,CAAA;AAED,wBAAgB,2BAA2B,IAAI,oBAAoB,GAAG,IAAI,CAKzE"}

package/dist/duct-segment/continuation.js

@@ -1,8 +1,8 @@
 import { useScene, } from '@pascal-app/core';
 import { useEditor } from '@pascal-app/editor';
 import { useViewer } from '@pascal-app/viewer';
-import { findMatedScenePorts, planDuctElbowBranchPromotion, planDuctTeeCrossPromotion, resolveDuctContinuationHandle, } from '../shared/elbow-branch-continuation';
-import { ductPortDiameterIn } from './geometry';
+import { findMatedScenePorts, planDuctElbowBranchPromotion, planDuctTeeCrossPromotion, resolveDuctContinuationHandle, } from '../shared/elbow-branch-continuation.js';
+import { ductPortDiameterIn } from './geometry.js';
 export function ductEndpointPort(duct, endpoint) {
     if (duct.path.length < 2)
         return null;

package/dist/duct-segment/definition.d.ts

@@ -1,4 +1,4 @@
 import { type NodeDefinition } from '@pascal-app/core';
-import { DuctSegmentNode } from './schema';
+import { DuctSegmentNode } from './schema.js';
 export declare const ductSegmentDefinition: NodeDefinition<typeof DuctSegmentNode>;
 //# sourceMappingURL=definition.d.ts.map

package/dist/duct-segment/definition.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"definition.d.ts","sourceRoot":"","sources":["../../src/duct-segment/definition.ts"],"names":[],"mappings":"AAAA,OAAO,EAAgB,KAAK,cAAc,EAAY,MAAM,kBAAkB,CAAA;AAS9E,OAAO,EAAE,eAAe,EAAE,MAAM,UAAU,CAAA;AAoC1C,eAAO,MAAM,qBAAqB,EAAE,cAAc,CAAC,OAAO,eAAe,CAyJxE,CAAA"}
+{"version":3,"file":"definition.d.ts","sourceRoot":"","sources":["../../src/duct-segment/definition.ts"],"names":[],"mappings":"AAAA,OAAO,EAA+B,KAAK,cAAc,EAAY,MAAM,kBAAkB,CAAA;AAS7F,OAAO,EAAE,eAAe,EAAE,MAAM,UAAU,CAAA;AAoC1C,eAAO,MAAM,qBAAqB,EAAE,cAAc,CAAC,OAAO,eAAe,CAyJxE,CAAA"}

package/dist/duct-segment/definition.js

@@ -1,13 +1,13 @@
-import { useScene } from '@pascal-app/core';
-import { ductBodyPaint, ductBodySlots } from '../shared/duct-body-paint';
-import { createPathPointMoveAffordance } from '../shared/path-point-affordance';
-import { createSegmentMoveAffordance } from '../shared/path-segment-affordance';
-import { createRunHangerToolHint } from '../shared/run-hanger-mode';
-import { ductBranchAffordance, ductContinuationAffordance } from './continuation';
-import { buildDuctSegmentFloorplan } from './floorplan';
-import { buildDuctSegmentGeometry, ductPortDiameterIn } from './geometry';
-import { ductSegmentParametrics } from './parametrics';
-import { DuctSegmentNode } from './schema';
+import { ductBodySlots, useScene } from '@pascal-app/core';
+import { ductBodyPaint } from '../shared/duct-body-paint.js';
+import { createPathPointMoveAffordance } from '../shared/path-point-affordance.js';
+import { createSegmentMoveAffordance } from '../shared/path-segment-affordance.js';
+import { createRunHangerToolHint } from '../shared/run-hanger-mode.js';
+import { ductBranchAffordance, ductContinuationAffordance } from './continuation.js';
+import { buildDuctSegmentFloorplan } from './floorplan.js';
+import { buildDuctSegmentGeometry, ductPortDiameterIn } from './geometry.js';
+import { ductSegmentParametrics } from './parametrics.js';
+import { DuctSegmentNode } from './schema.js';
 /**
  * Phase 1 of the HVAC node system — round duct segment as a polyline.
  *
@@ -98,7 +98,7 @@ export const ductSegmentDefinition = {
     },
     system: {
         module: async () => ({
-            default: (await import('../shared/run-hanger-system')).DuctHangerSystem,
+            default: (await import('../shared/run-hanger-system.js')).DuctHangerSystem,
         }),
     },
     floorplanDependsOnSiblings: true,
@@ -152,13 +152,13 @@ export const ductSegmentDefinition = {
     // mounts via the editor's SelectionAffordanceManager — not `def.system`,
     // which the viewer package mounts for the read-only route.
     affordanceTools: {
-        selection: () => import('./selection'),
+        selection: () => import('./selection.js'),
         // Ghost-preview duplicate / move. Duplicate is pure drag-to-place: a
         // translucent copy of the run follows the cursor and only lands on the
         // commit click — nothing is inserted into the scene before that.
-        move: () => import('./move-tool'),
+        move: () => import('./move-tool.js'),
     },
-    tool: () => import('./tool'),
+    tool: () => import('./tool.js'),
     toolHints: [
         { key: 'Click', label: 'Start segment' },
         { key: 'Click again', label: 'Place and continue' },

package/dist/duct-segment/floorplan.d.ts

@@ -1,5 +1,5 @@
 import type { FloorplanGeometry, GeometryContext } from '@pascal-app/core';
-import type { DuctSegmentNode } from './schema';
+import type { DuctSegmentNode } from './schema.js';
 /**
  * Floor-plan representation of a duct run: the path drawn at the duct's
  * real width (plan-unit stroke so it scales with zoom), with a dashed

package/dist/duct-segment/floorplan.js

@@ -1,6 +1,6 @@
-import { runHangerFloorplan } from '../shared/run-hangers';
-import { ductContinuationHandlePlan, ductEndpointPort } from './continuation';
-import { INCHES_TO_METERS } from './geometry';
+import { runHangerFloorplan } from '../shared/run-hangers.js';
+import { ductContinuationHandlePlan, ductEndpointPort } from './continuation.js';
+import { INCHES_TO_METERS } from './geometry.js';
 const SUPPLY_CENTERLINE = '#d4825a';
 const RETURN_CENTERLINE = '#5a8ad4';
 const BODY_COLOR = '#9ca3af';

package/dist/duct-segment/geometry.d.ts

@@ -1,7 +1,7 @@
 import type { GeometryContext } from '@pascal-app/core';
 import { type ColorPreset, type RenderShading } from '@pascal-app/viewer';
 import { ExtrudeGeometry, Group, type Material, Mesh, Vector3 } from 'three';
-import type { DuctSegmentNode } from './schema';
+import type { DuctSegmentNode } from './schema.js';
 export declare const INCHES_TO_METERS = 0.0254;
 /**
  * Area-equivalent round diameter (inches) for a rect cross-section —

package/dist/duct-segment/geometry.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"geometry.d.ts","sourceRoot":"","sources":["../../src/duct-segment/geometry.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAA;AACvD,OAAO,EACL,KAAK,WAAW,EAEhB,KAAK,aAAa,EAGnB,MAAM,oBAAoB,CAAA;AAC3B,OAAO,EAIL,eAAe,EACf,KAAK,EACL,KAAK,QAAQ,EAEb,IAAI,EAMJ,OAAO,EACR,MAAM,OAAO,CAAA;AAGd,OAAO,KAAK,EAAE,eAAe,EAAE,MAAM,UAAU,CAAA;AAE/C,eAAO,MAAM,gBAAgB,SAAS,CAAA;AAuBtC;;;;GAIG;AACH,wBAAgB,oBAAoB,CAAC,OAAO,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,GAAG,MAAM,CAE9E;AAED;;;GAGG;AACH,wBAAgB,wBAAwB,CAAC,OAAO,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,GAAG,MAAM,CAKlF;AAED,kEAAkE;AAClE,wBAAgB,kBAAkB,CAAC,IAAI,EAAE;IACvC,KAAK,CAAC,EAAE,OAAO,GAAG,MAAM,GAAG,MAAM,CAAA;IACjC,QAAQ,EAAE,MAAM,CAAA;IAChB,KAAK,CAAC,EAAE,MAAM,CAAA;IACd,MAAM,CAAC,EAAE,MAAM,CAAA;CAChB,GAAG,MAAM,CAQT;AAED;;;;;;;GAOG;AACH,wBAAgB,eAAe,CAAC,GAAG,EAAE,OAAO,EAAE,IAAI,SAAI,GAAG;IAAE,KAAK,EAAE,OAAO,CAAC;IAAC,MAAM,EAAE,OAAO,CAAA;CAAE,CAW3F;AAED;;;;;;;GAOG;AACH,wBAAgB,yBAAyB,CACvC,SAAS,EAAE,OAAO,EAClB,UAAU,EAAE,MAAM,EAClB,OAAO,EAAE,OAAO,EAChB,MAAM,EAAE,OAAO,GACd,MAAM,CAeR;AAED;;;;;;GAMG;AACH,wBAAgB,gBAAgB,CAC9B,KAAK,EAAE,OAAO,EACd,GAAG,EAAE,OAAO,EACZ,MAAM,EAAE,MAAM,EACd,OAAO,EAAE,MAAM,EACf,QAAQ,EAAE,QAAQ,EAClB,IAAI,EAAE,MAAM,EACZ,IAAI,SAAI,GACP,IAAI,GAAG,IAAI,CAcb;AAiBD;;;;GAIG;AACH,wBAAgB,yBAAyB,CACvC,MAAM,EAAE,MAAM,EACd,OAAO,EAAE,MAAM,EACf,OAAO,EAAE,MAAM,GACd,eAAe,CASjB;AAED;;;GAGG;AACH,wBAAgB,gBAAgB,CAC9B,KAAK,EAAE,OAAO,EACd,GAAG,EAAE,OAAO,EACZ,MAAM,EAAE,MAAM,EACd,OAAO,EAAE,MAAM,EACf,QAAQ,EAAE,QAAQ,EAClB,IAAI,EAAE,MAAM,EACZ,IAAI,SAAI,GACP,IAAI,GAAG,IAAI,CAab;AAED;;;GAGG;AACH,wBAAgB,YAAY,CAC1B,KAAK,EAAE,OAAO,EACd,GAAG,EAAE,OAAO,EACZ,MAAM,EAAE,MAAM,EACd,QAAQ,EAAE,QAAQ,EAClB,IAAI,EAAE,MAAM,GACX,IAAI,GAAG,IAAI,CAcb;AAyED,KAAK,cAAc,GAAG;IACpB,YAAY,EAAE,aAAa,GAAG,QAAQ,GAAG,MAAM,GAAG,YAAY,CAAA;IAC9D,MAAM,EAAE,QAAQ,GAAG,QAAQ,CAAA;IAC3B,KAAK,CAAC,EAAE,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,CAAA;CAC/B,CAAA;AAMD;;;;;GAKG;AACH,wBAAgB,kBAAkB,CAChC,IAAI,EAAE,cAAc,EACpB,cAAc,CAAC,EAAE,eAAe,CAAC,WAAW,CAAC,EAC7C,OAAO,GAAE,aAA0B,EACnC,QAAQ,UAAO,EACf,WAAW,GAAE,WAAoB,EACjC,UAAU,CAAC,EAAE,MAAM,GAClB,QAAQ,CAYV;AAED;;;;;;;;;;;;;;;GAeG;AACH,wBAAgB,wBAAwB,CACtC,IAAI,EAAE,eAAe,EACrB,GAAG,CAAC,EAAE,eAAe,EACrB,OAAO,GAAE,aAA0B,EACnC,QAAQ,UAAO,EACf,WAAW,GAAE,WAAoB,EACjC,UAAU,CAAC,EAAE,MAAM,GAClB,KAAK,CA0HP"}
+{"version":3,"file":"geometry.d.ts","sourceRoot":"","sources":["../../src/duct-segment/geometry.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAA;AAEvD,OAAO,EACL,KAAK,WAAW,EAEhB,KAAK,aAAa,EAGnB,MAAM,oBAAoB,CAAA;AAC3B,OAAO,EAIL,eAAe,EACf,KAAK,EACL,KAAK,QAAQ,EAEb,IAAI,EAMJ,OAAO,EACR,MAAM,OAAO,CAAA;AAEd,OAAO,KAAK,EAAE,eAAe,EAAE,MAAM,UAAU,CAAA;AAE/C,eAAO,MAAM,gBAAgB,SAAS,CAAA;AAuBtC;;;;GAIG;AACH,wBAAgB,oBAAoB,CAAC,OAAO,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,GAAG,MAAM,CAE9E;AAED;;;GAGG;AACH,wBAAgB,wBAAwB,CAAC,OAAO,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,GAAG,MAAM,CAKlF;AAED,kEAAkE;AAClE,wBAAgB,kBAAkB,CAAC,IAAI,EAAE;IACvC,KAAK,CAAC,EAAE,OAAO,GAAG,MAAM,GAAG,MAAM,CAAA;IACjC,QAAQ,EAAE,MAAM,CAAA;IAChB,KAAK,CAAC,EAAE,MAAM,CAAA;IACd,MAAM,CAAC,EAAE,MAAM,CAAA;CAChB,GAAG,MAAM,CAQT;AAED;;;;;;;GAOG;AACH,wBAAgB,eAAe,CAAC,GAAG,EAAE,OAAO,EAAE,IAAI,SAAI,GAAG;IAAE,KAAK,EAAE,OAAO,CAAC;IAAC,MAAM,EAAE,OAAO,CAAA;CAAE,CAW3F;AAED;;;;;;;GAOG;AACH,wBAAgB,yBAAyB,CACvC,SAAS,EAAE,OAAO,EAClB,UAAU,EAAE,MAAM,EAClB,OAAO,EAAE,OAAO,EAChB,MAAM,EAAE,OAAO,GACd,MAAM,CAeR;AAED;;;;;;GAMG;AACH,wBAAgB,gBAAgB,CAC9B,KAAK,EAAE,OAAO,EACd,GAAG,EAAE,OAAO,EACZ,MAAM,EAAE,MAAM,EACd,OAAO,EAAE,MAAM,EACf,QAAQ,EAAE,QAAQ,EAClB,IAAI,EAAE,MAAM,EACZ,IAAI,SAAI,GACP,IAAI,GAAG,IAAI,CAcb;AAiBD;;;;GAIG;AACH,wBAAgB,yBAAyB,CACvC,MAAM,EAAE,MAAM,EACd,OAAO,EAAE,MAAM,EACf,OAAO,EAAE,MAAM,GACd,eAAe,CASjB;AAED;;;GAGG;AACH,wBAAgB,gBAAgB,CAC9B,KAAK,EAAE,OAAO,EACd,GAAG,EAAE,OAAO,EACZ,MAAM,EAAE,MAAM,EACd,OAAO,EAAE,MAAM,EACf,QAAQ,EAAE,QAAQ,EAClB,IAAI,EAAE,MAAM,EACZ,IAAI,SAAI,GACP,IAAI,GAAG,IAAI,CAab;AAED;;;GAGG;AACH,wBAAgB,YAAY,CAC1B,KAAK,EAAE,OAAO,EACd,GAAG,EAAE,OAAO,EACZ,MAAM,EAAE,MAAM,EACd,QAAQ,EAAE,QAAQ,EAClB,IAAI,EAAE,MAAM,GACX,IAAI,GAAG,IAAI,CAcb;AAyED,KAAK,cAAc,GAAG;IACpB,YAAY,EAAE,aAAa,GAAG,QAAQ,GAAG,MAAM,GAAG,YAAY,CAAA;IAC9D,MAAM,EAAE,QAAQ,GAAG,QAAQ,CAAA;IAC3B,KAAK,CAAC,EAAE,MAAM,CAAC,MAAM,EAAE,MAAM,CAAC,CAAA;CAC/B,CAAA;AAMD;;;;;GAKG;AACH,wBAAgB,kBAAkB,CAChC,IAAI,EAAE,cAAc,EACpB,cAAc,CAAC,EAAE,eAAe,CAAC,WAAW,CAAC,EAC7C,OAAO,GAAE,aAA0B,EACnC,QAAQ,UAAO,EACf,WAAW,GAAE,WAAoB,EACjC,UAAU,CAAC,EAAE,MAAM,GAClB,QAAQ,CAYV;AAED;;;;;;;;;;;;;;;GAeG;AACH,wBAAgB,wBAAwB,CACtC,IAAI,EAAE,eAAe,EACrB,GAAG,CAAC,EAAE,eAAe,EACrB,OAAO,GAAE,aAA0B,EACnC,QAAQ,UAAO,EACf,WAAW,GAAE,WAAoB,EACjC,UAAU,CAAC,EAAE,MAAM,GAClB,KAAK,CA0HP"}

package/dist/duct-segment/geometry.js

@@ -1,7 +1,7 @@
+import { DUCT_BODY_SLOT_DEFAULT, DUCT_BODY_SLOT_ID } from '@pascal-app/core';
 import { createSurfaceRoleMaterial, resolveMaterialRef, resolveSlotDefaultMaterial, } from '@pascal-app/viewer';
 import { BoxGeometry, CatmullRomCurve3, CylinderGeometry, ExtrudeGeometry, Group, Matrix4, Mesh, MeshStandardMaterial, Quaternion, Shape, SphereGeometry, TubeGeometry, Vector3, } from 'three';
-import { DUCT_BODY_SLOT_DEFAULT, DUCT_BODY_SLOT_ID } from '../shared/duct-body-paint';
-import { buildRunHangers } from '../shared/run-hangers';
+import { buildRunHangers } from '../shared/run-hangers.js';
 export const INCHES_TO_METERS = 0.0254;
 // Insulation wraps the duct in a roughly uniform shell. A strictly physical
 // mapping (fiberglass ≈ R-3.2 per inch) makes low R-values nearly invisible

package/dist/duct-segment/index.d.ts

@@ -1,4 +1,4 @@
-export { ductSegmentDefinition } from './definition';
-export { buildDuctSegmentGeometry } from './geometry';
-export { DuctSegmentNode } from './schema';
+export { ductSegmentDefinition } from './definition.js';
+export { buildDuctSegmentGeometry } from './geometry.js';
+export { DuctSegmentNode } from './schema.js';
 //# sourceMappingURL=index.d.ts.map

package/dist/duct-segment/index.js

@@ -1,3 +1,3 @@
-export { ductSegmentDefinition } from './definition';
-export { buildDuctSegmentGeometry } from './geometry';
-export { DuctSegmentNode } from './schema';
+export { ductSegmentDefinition } from './definition.js';
+export { buildDuctSegmentGeometry } from './geometry.js';
+export { DuctSegmentNode } from './schema.js';

package/dist/duct-segment/move-tool.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"move-tool.d.ts","sourceRoot":"","sources":["../../src/duct-segment/move-tool.tsx"],"names":[],"mappings":"AAEA,OAAO,EAEL,KAAK,OAAO,EAQb,MAAM,kBAAkB,CAAA;AAkFzB;;;;;;;;;;;;;;;GAeG;AACH,eAAO,MAAM,mBAAmB,EAAE,KAAK,CAAC,EAAE,CAAC;IAAE,IAAI,EAAE,OAAO,CAAA;CAAE,CAsT3D,CAAA;AA0DD,eAAe,mBAAmB,CAAA"}
+{"version":3,"file":"move-tool.d.ts","sourceRoot":"","sources":["../../src/duct-segment/move-tool.tsx"],"names":[],"mappings":"AAEA,OAAO,EAEL,KAAK,OAAO,EAQb,MAAM,kBAAkB,CAAA;AAoFzB;;;;;;;;;;;;;;;GAeG;AACH,eAAO,MAAM,mBAAmB,EAAE,KAAK,CAAC,EAAE,CAAC;IAAE,IAAI,EAAE,OAAO,CAAA;CAAE,CA4T3D,CAAA;eA0Dc,mBAAmB"}

package/dist/duct-segment/move-tool.js

@@ -1,17 +1,18 @@
 'use client';
 import { jsx as _jsx, jsxs as _jsxs } from "react/jsx-runtime";
 import { analyzePortConnectivity, DuctSegmentNode, emitter, sceneRegistry, useScene, } from '@pascal-app/core';
-import { consumePlacementDragRelease, DragBoundingBox, EDITOR_LAYER, isAlignmentGuideActive, isGridSnapActive, isMagneticSnapActive, markToolCancelConsumed, stripPlacementMetadataFlags, triggerSFX, useAlignmentGuides, useEditor, } from '@pascal-app/editor';
+import { consumePlacementDragRelease, copyCollectionIds, DragBoundingBox, EDITOR_LAYER, isAlignmentGuideActive, isGridSnapActive, isMagneticSnapActive, markToolCancelConsumed, stripPlacementMetadataFlags, triggerSFX, useAlignmentGuides, useEditor, } from '@pascal-app/editor';
+import { collectScenePorts } from '@pascal-app/editor/distribution';
 import { useViewer } from '@pascal-app/viewer';
 import { useEffect, useRef, useState } from 'react';
 import { Matrix4, Vector3 } from 'three';
-import { collectGhostAlignmentCandidates, resolveGhostAlignment, } from '../shared/ghost-alignment';
-import { DuctSegmentGhost, FittingGhost } from '../shared/mep-ghost';
-import { collectScenePorts, DUCT_PORT_SYSTEMS } from '../shared/ports';
-import { startRunMoveConnectivity } from '../shared/run-move-connectivity';
-import { planRunTranslationOffsets, } from '../shared/run-translation-offset';
-import { translateWallRun } from '../shared/wall-run-move';
-import { rectSectionAxes } from './geometry';
+import { collectGhostAlignmentCandidates, resolveGhostAlignment, } from '../shared/ghost-alignment.js';
+import { DuctSegmentGhost, FittingGhost } from '../shared/mep-ghost.js';
+import { DUCT_PORT_SYSTEMS } from '../shared/port-systems.js';
+import { startRunMoveConnectivity } from '../shared/run-move-connectivity.js';
+import { planRunTranslationOffsets, } from '../shared/run-translation-offset.js';
+import { translateWallRun } from '../shared/wall-run-move.js';
+import { rectSectionAxes } from './geometry.js';
 const GHOST_COLOR = '#818cf8';
 const GHOST_OPACITY = 0.5;
 const IN_TO_M = 0.0254;
@@ -226,7 +227,13 @@ export const MoveDuctSegmentTool = ({ node }) => {
                     metadata: stripPlacementMetadataFlags(node.metadata),
                     visible: true,
                 });
-                useScene.getState().createNode(created, node.parentId);
+                useScene.getState().createNodes([
+                    {
+                        node: created,
+                        parentId: node.parentId,
+                        collectionIds: copyCollectionIds(node),
+                    },
+                ]);
                 selectId = created.id;
             }
             else {

package/dist/duct-segment/parametrics.d.ts

@@ -1,4 +1,4 @@
 import { type ParametricDescriptor } from '@pascal-app/core';
-import type { DuctSegmentNode } from './schema';
+import type { DuctSegmentNode } from './schema.js';
 export declare const ductSegmentParametrics: ParametricDescriptor<DuctSegmentNode>;
 //# sourceMappingURL=parametrics.d.ts.map

package/dist/duct-segment/parametrics.js

@@ -1,9 +1,9 @@
 import { useScene } from '@pascal-app/core';
 import { Vector3 } from 'three';
-import { getDuctFittingPorts } from '../duct-fitting/ports';
-import { findAutomaticRunEndCapIds } from '../shared/automatic-run-end-cap';
-import { fittingDeletionPlansForRun } from '../shared/fitting-deletion-cleanup';
-import { rollToContinueAcrossElbow } from './geometry';
+import { getDuctFittingPorts } from '../duct-fitting/ports.js';
+import { findAutomaticRunEndCapIds } from '../shared/automatic-run-end-cap.js';
+import { fittingDeletionPlansForRun } from '../shared/fitting-deletion-cleanup.js';
+import { rollToContinueAcrossElbow } from './geometry.js';
 /** A run endpoint sitting this close to a collar counts as mated. */
 const MATE_TOL_M = 0.03;
 function dist2(a, b) {
@@ -100,7 +100,7 @@ export const ductSegmentParametrics = {
         ...findAutomaticRunEndCapIds(duct.id, nodes, 'duct-fitting'),
         ...fittingDeletionPlansForRun(duct, nodes, requestedDeleteIds, false).flatMap((plan) => plan.deleteFitting ? [plan.fittingId, ...plan.cascadeDeleteIds] : []),
     ],
-    trailingSection: () => import('../shared/run-hanger-inspector'),
+    trailingSection: () => import('../shared/run-hanger-inspector.js'),
     groups: [
         {
             label: 'Hangers',

package/dist/duct-segment/selection.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"selection.d.ts","sourceRoot":"","sources":["../../src/duct-segment/selection.tsx"],"names":[],"mappings":"AA+IA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA6BG;AACH,QAAA,MAAM,8BAA8B,0CAuCnC,CAAA;AA68CD,eAAe,8BAA8B,CAAA"}
+{"version":3,"file":"selection.d.ts","sourceRoot":"","sources":["../../src/duct-segment/selection.tsx"],"names":[],"mappings":"AAgJA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA6BG;AACH,QAAA,MAAM,8BAA8B,0CAuCnC,CAAA;eA68Cc,8BAA8B"}

package/dist/duct-segment/selection.js

@@ -1,23 +1,24 @@
 'use client';
-import { jsx as _jsx, jsxs as _jsxs, Fragment as _Fragment } from "react/jsx-runtime";
+import { Fragment as _Fragment, jsx as _jsx, jsxs as _jsxs } from "react/jsx-runtime";
 import { analyzePortConnectivity, DuctSegmentNode, nodeRegistry, pauseSceneHistory, resolveConnectivityUpdates, resumeSceneHistory, sceneRegistry, useLiveNodeOverrides, useScene, } from '@pascal-app/core';
 import { clearPlacementSurface, DimensionPill, isAngleSnapActive, isGridSnapActive, swallowNextClick, triggerSFX, useEditor, } from '@pascal-app/editor';
+import { collectScenePorts, findNearestPortXZ } from '@pascal-app/editor/distribution';
 import { useViewer } from '@pascal-app/viewer';
 import { Html } from '@react-three/drei';
 import { createPortal, useFrame, useThree } from '@react-three/fiber';
 import { useEffect, useMemo, useRef, useState } from 'react';
 import { Euler, Matrix4, Plane, Quaternion, Raycaster, Vector2, Vector3, } from 'three';
-import { newAutoOffsetGroupId, readAutoOffsetTag, translateAutoOffsetBase, withAutoOffsetTag, withoutAutoOffsetTag, } from '../shared/auto-offset-tag';
-import { planRunEndCapFollowUpdates } from '../shared/automatic-run-end-cap';
-import { detectFittingEndpoint, planFittingEndpointReaim, } from '../shared/fitting-endpoint-reaim';
-import { DuctSegmentGhost, FittingGhost } from '../shared/mep-ghost';
-import { collectScenePorts, DUCT_PORT_SYSTEMS, findNearestPortXZ } from '../shared/ports';
-import { planRunTranslationOffsets } from '../shared/run-translation-offset';
-import { ContinuePlusHandle, HandleCube, MoveChevron, RotateArc } from '../shared/selection-handles';
-import { planVerticalOffsets } from '../shared/vertical-offset';
-import { refreshWallRunAttachment } from '../shared/wall-run-move';
-import { activateDuctContinuation, ductContinuationHandlePlan, } from './continuation';
-import { INCHES_TO_METERS } from './geometry';
+import { newAutoOffsetGroupId, readAutoOffsetTag, translateAutoOffsetBase, withAutoOffsetTag, withoutAutoOffsetTag, } from '../shared/auto-offset-tag.js';
+import { planRunEndCapFollowUpdates } from '../shared/automatic-run-end-cap.js';
+import { detectFittingEndpoint, planFittingEndpointReaim, } from '../shared/fitting-endpoint-reaim.js';
+import { DuctSegmentGhost, FittingGhost } from '../shared/mep-ghost.js';
+import { DUCT_PORT_SYSTEMS } from '../shared/port-systems.js';
+import { planRunTranslationOffsets } from '../shared/run-translation-offset.js';
+import { ContinuePlusHandle, HandleCube, MoveChevron, RotateArc } from '../shared/selection-handles.js';
+import { planVerticalOffsets } from '../shared/vertical-offset.js';
+import { refreshWallRunAttachment } from '../shared/wall-run-move.js';
+import { activateDuctContinuation, ductContinuationHandlePlan, } from './continuation.js';
+import { INCHES_TO_METERS } from './geometry.js';
 /** Port-snap radius for dragged run endpoints (meters, XZ). */
 const PORT_SNAP_RADIUS_M = 0.4;
 // In-world arrow handle layout (meters) — the arrows stand off the run body so

package/dist/duct-segment/tool.d.ts

@@ -1,6 +1,5 @@
 import { type AnyNode, type DuctFittingNode, DuctSegmentNode } from '@pascal-app/core';
-import { type RunSurfaceTarget } from '../shared/distribution-run-contract';
-import { type RunBodyHit, type ScenePort } from '../shared/ports';
+import { type RunBodyHit, type RunSurfaceTarget, type ScenePort } from '@pascal-app/editor/distribution';
 /** Cross-section shared by the drawn run and its fitting preview. */
 type DraftProfile = {
     shape: 'round' | 'rect' | 'oval';

package/dist/duct-segment/tool.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"tool.d.ts","sourceRoot":"","sources":["../../src/duct-segment/tool.tsx"],"names":[],"mappings":"AAEA,OAAO,EAAE,KAAK,OAAO,EAAE,KAAK,eAAe,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAA;AAuBtF,OAAO,EAA2B,KAAK,gBAAgB,EAAE,MAAM,qCAAqC,CAAA;AAYpG,OAAO,EAKL,KAAK,UAAU,EACf,KAAK,SAAS,EACf,MAAM,iBAAiB,CAAA;AA2IxB,qEAAqE;AACrE,KAAK,YAAY,GAAG;IAClB,KAAK,EAAE,OAAO,GAAG,MAAM,GAAG,MAAM,CAAA;IAChC,QAAQ,EAAE,MAAM,CAAA;IAChB,KAAK,EAAE,MAAM,CAAA;IACb,MAAM,EAAE,MAAM,CAAA;CACf,CAAA;AAED,wBAAgB,qBAAqB,CAAC,OAAO,EAAE,YAAY,EAAE,IAAI,UAAQ,GAAG,MAAM,CAUjF;AAgDD;;;;;6BAK6B;AAC7B,KAAK,YAAY,GAAG;IAClB,iBAAiB,EAAE,MAAM,GAAG,IAAI,CAAA;IAChC,QAAQ,EAAE,eAAe,EAAE,CAAA;IAC3B,KAAK,EAAE,eAAe,EAAE,CAAA;IACxB,KAAK,EAAE,eAAe,EAAE,CAAA;IACxB,OAAO,EAAE;QAAE,EAAE,EAAE,OAAO,CAAC,IAAI,CAAC,CAAC;QAAC,IAAI,EAAE,OAAO,CAAC,OAAO,CAAC,CAAA;KAAE,EAAE,CAAA;IACxD,MAAM,EAAE,OAAO,CAAC,IAAI,CAAC,EAAE,CAAA;CACxB,CAAA;AA4CD;;;;;;;;GAQG;AACH,wBAAgB,YAAY,CAC1B,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAC/B,GAAG,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAC7B,SAAS,EAAE,SAAS,GAAG,IAAI,EAC3B,SAAS,EAAE,UAAU,GAAG,IAAI,EAC5B,OAAO,EAAE,SAAS,GAAG,IAAI,EACzB,OAAO,EAAE,UAAU,GAAG,IAAI,EAC1B,OAAO,EAAE,YAAY,EACrB,KAAK,EAAE,QAAQ,CAAC,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,CAAC,EACxC,OAAO,CAAC,EAAE,gBAAgB,GAAG,IAAI,EACjC,WAAW,UAAQ,EACnB,YAAY,GAAE,OAAO,CAAC,eAAe,CAAM,EAC3C,WAAW,GAAE,QAAQ,GAAG,QAAmB,GAC1C,YAAY,GAAG,IAAI,CAsLrB;AAED,QAAA,MAAM,eAAe,0CAoRpB,CAAA;AAED,eAAe,eAAe,CAAA"}
+{"version":3,"file":"tool.d.ts","sourceRoot":"","sources":["../../src/duct-segment/tool.tsx"],"names":[],"mappings":"AAEA,OAAO,EAAE,KAAK,OAAO,EAAE,KAAK,eAAe,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAA;AAQtF,OAAO,EAOL,KAAK,UAAU,EACf,KAAK,gBAAgB,EACrB,KAAK,SAAS,EAGf,MAAM,iCAAiC,CAAA;AA+JxC,qEAAqE;AACrE,KAAK,YAAY,GAAG;IAClB,KAAK,EAAE,OAAO,GAAG,MAAM,GAAG,MAAM,CAAA;IAChC,QAAQ,EAAE,MAAM,CAAA;IAChB,KAAK,EAAE,MAAM,CAAA;IACb,MAAM,EAAE,MAAM,CAAA;CACf,CAAA;AAED,wBAAgB,qBAAqB,CAAC,OAAO,EAAE,YAAY,EAAE,IAAI,UAAQ,GAAG,MAAM,CAUjF;AAgDD;;;;;6BAK6B;AAC7B,KAAK,YAAY,GAAG;IAClB,iBAAiB,EAAE,MAAM,GAAG,IAAI,CAAA;IAChC,QAAQ,EAAE,eAAe,EAAE,CAAA;IAC3B,KAAK,EAAE,eAAe,EAAE,CAAA;IACxB,KAAK,EAAE,eAAe,EAAE,CAAA;IACxB,OAAO,EAAE;QAAE,EAAE,EAAE,OAAO,CAAC,IAAI,CAAC,CAAC;QAAC,IAAI,EAAE,OAAO,CAAC,OAAO,CAAC,CAAA;KAAE,EAAE,CAAA;IACxD,MAAM,EAAE,OAAO,CAAC,IAAI,CAAC,EAAE,CAAA;CACxB,CAAA;AA4CD;;;;;;;;GAQG;AACH,wBAAgB,YAAY,CAC1B,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAC/B,GAAG,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,EAC7B,SAAS,EAAE,SAAS,GAAG,IAAI,EAC3B,SAAS,EAAE,UAAU,GAAG,IAAI,EAC5B,OAAO,EAAE,SAAS,GAAG,IAAI,EACzB,OAAO,EAAE,UAAU,GAAG,IAAI,EAC1B,OAAO,EAAE,YAAY,EACrB,KAAK,EAAE,QAAQ,CAAC,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,CAAC,EACxC,OAAO,CAAC,EAAE,gBAAgB,GAAG,IAAI,EACjC,WAAW,UAAQ,EACnB,YAAY,GAAE,OAAO,CAAC,eAAe,CAAM,EAC3C,WAAW,GAAE,QAAQ,GAAG,QAAmB,GAC1C,YAAY,GAAG,IAAI,CAwLrB;AAED,QAAA,MAAM,eAAe,0CAuRpB,CAAA;eAEc,eAAe"}

package/dist/duct-segment/tool.js

@@ -2,24 +2,23 @@
 import { jsx as _jsx, jsxs as _jsxs } from "react/jsx-runtime";
 import { DuctSegmentNode } from '@pascal-app/core';
 import { EDITOR_LAYER, triggerSFX, useEditor, usePathDraftPreview, useRegistryToolContext, } from '@pascal-app/editor';
+import { collectScenePorts, createRunWallAttachment, DistributionRunCursor, runDistanceSquared as dist2, findNearestRunBody3D, findRunBodyCrossingSurface, stepNominalRunSize, useDistributionRunTool, } from '@pascal-app/editor/distribution';
 import { useEffect, useMemo, useRef, useState } from 'react';
 import { Euler, Vector3 } from 'three';
-import { getDuctFittingPorts } from '../duct-fitting/ports';
-import { planCrossAtRunBody, planElbowAtPort, planElbowRealign, planTeeAtRunBody, } from '../shared/auto-fitting';
-import { createDuctRunEndCap, findMatedRunEndCapIds, isRunEndCapPort, } from '../shared/automatic-run-end-cap';
-import { ConnectionFeedback } from '../shared/connection-feedback';
-import { createRunWallAttachment } from '../shared/distribution-run-contract';
-import { DistributionRunCursor, runDistanceSquared as dist2, runSectionHalfSizeM, stepNominalRunSize, useDistributionRunTool, } from '../shared/distribution-run-tool';
-import { ductProfilesMatch, planDuctAdapter } from '../shared/duct-adapter';
-import { FITTING_CLEARANCE_MESSAGE, hasFittingClearance } from '../shared/fitting-clearance';
-import { LevelOffsetGroup } from '../shared/level-offset-group';
-import { DuctSegmentGhost, FittingGhost } from '../shared/mep-ghost';
-import { collectScenePorts, DUCT_PORT_SYSTEMS, findNearestRunBody3D, findRunBodyCrossingSurface, } from '../shared/ports';
-import { RunHangerPreview } from '../shared/run-hanger-controls';
-import { useRunHangerMode } from '../shared/run-hanger-mode';
-import { currentDuctContinuationSeed, ductEndpointPort } from './continuation';
-import { ductSegmentDefinition } from './definition';
-import { rectSectionAxes, rollToContinueAcrossElbow } from './geometry';
+import { getDuctFittingPorts } from '../duct-fitting/ports.js';
+import { planCrossAtRunBody, planElbowAtPort, planElbowRealign, planTeeAtRunBody, } from '../shared/auto-fitting.js';
+import { createDuctRunEndCap, findMatedRunEndCapIds, isRunEndCapPort, } from '../shared/automatic-run-end-cap.js';
+import { ConnectionFeedback } from '../shared/connection-feedback.js';
+import { ductProfilesMatch, planDuctAdapter } from '../shared/duct-adapter.js';
+import { FITTING_CLEARANCE_MESSAGE, hasFittingClearance } from '../shared/fitting-clearance.js';
+import { LevelOffsetGroup } from '../shared/level-offset-group.js';
+import { DuctSegmentGhost, FittingGhost } from '../shared/mep-ghost.js';
+import { DUCT_PORT_SYSTEMS, runSectionHalfSizeM } from '../shared/port-systems.js';
+import { RunHangerPreview } from '../shared/run-hanger-controls.js';
+import { useRunHangerMode } from '../shared/run-hanger-mode.js';
+import { currentDuctContinuationSeed, ductEndpointPort } from './continuation.js';
+import { ductSegmentDefinition } from './definition.js';
+import { rectSectionAxes, rollToContinueAcrossElbow } from './geometry.js';
 /**
  * Continuous placement tool for duct segments.
  *
@@ -308,7 +307,9 @@ export function planDuctDraw(start, end, startPort, startBody, endPort, endBody,
         ductEnd = endRealign?.collarPoint ?? end;
     const realigns = [startRealign, endRealign].filter((p) => p !== null);
     const crossHit = surface
-        ? findRunBodyCrossingSurface(start, end, BODY_SNAP_RADIUS_M, surface)
+        ? findRunBodyCrossingSurface(start, end, BODY_SNAP_RADIUS_M, surface, {
+            kinds: ['duct-segment'],
+        })
         : null;
     const crossOwner = crossHit ? nodes[crossHit.nodeId] : null;
     const crossTappedElsewhere = crossHit?.nodeId === trunkBody?.nodeId || crossHit?.nodeId === endTrunkBody?.nodeId;
@@ -433,7 +434,10 @@ const DuctSegmentTool = () => {
             ? { port: continuationSeed.port, body: continuationSeed.body }
             : null,
         getPorts: () => getConnectionPorts(activeLevelId, sceneApi.nodes()),
-        findBody: (point) => findNearestRunBody3D(point, BODY_SNAP_RADIUS_M, { levelId: activeLevelId ?? undefined }),
+        findBody: (point) => findNearestRunBody3D(point, BODY_SNAP_RADIUS_M, {
+            kinds: ['duct-segment'],
+            levelId: activeLevelId ?? undefined,
+        }),
         surfaceClearance: (surface) => surface ? ductSurfaceClearanceM(profileRef.current, surface.kind === 'wall') : 0,
         minimumSegmentLength: 0.08,
         inheritFromConnection: ({ port }) => {

package/dist/duct-terminal/definition.d.ts

@@ -1,5 +1,5 @@
 import type { NodeDefinition } from '@pascal-app/core';
-import { DuctTerminalNode } from './schema';
+import { DuctTerminalNode } from './schema.js';
 /**
  * Phase 3 of the HVAC node system — duct terminals: supply registers,
  * ceiling diffusers, return grilles. The end of the air loop. One typed

package/dist/duct-terminal/definition.js

@@ -1,8 +1,8 @@
-import { buildDuctTerminalFloorplan } from './floorplan';
-import { buildDuctTerminalGeometry } from './geometry';
-import { ductTerminalParametrics } from './parametrics';
-import { getDuctTerminalPorts } from './ports';
-import { DuctTerminalNode } from './schema';
+import { buildDuctTerminalFloorplan } from './floorplan.js';
+import { buildDuctTerminalGeometry } from './geometry.js';
+import { ductTerminalParametrics } from './parametrics.js';
+import { getDuctTerminalPorts } from './ports.js';
+import { DuctTerminalNode } from './schema.js';
 /**
  * Phase 3 of the HVAC node system — duct terminals: supply registers,
  * ceiling diffusers, return grilles. The end of the air loop. One typed
@@ -67,7 +67,7 @@ export const ductTerminalDefinition = {
     ]),
     ports: getDuctTerminalPorts,
     floorplan: buildDuctTerminalFloorplan,
-    tool: () => import('./tool'),
+    tool: () => import('./tool.js'),
     toolHints: [
         { key: 'Click', label: 'Place register' },
         { key: 'M', label: 'Mount: floor / ceiling / wall' },

package/dist/duct-terminal/floorplan.d.ts

@@ -1,5 +1,5 @@
 import type { FloorplanGeometry, GeometryContext } from '@pascal-app/core';
-import type { DuctTerminalNode } from './schema';
+import type { DuctTerminalNode } from './schema.js';
 /**
  * Floor-plan symbol for a duct terminal: the face rectangle (rotated by
  * yaw) with the conventional register cross-slats hinted as a single

package/dist/duct-terminal/floorplan.js

@@ -1,4 +1,4 @@
-import { terminalSystem } from './ports';
+import { terminalSystem } from './ports.js';
 const SUPPLY_COLOR = '#d4825a';
 const RETURN_COLOR = '#5a8ad4';
 const FRAME_STROKE = '#6b7280';

package/dist/duct-terminal/geometry.d.ts

@@ -1,5 +1,5 @@
 import { Group } from 'three';
-import type { DuctTerminalNode } from './schema';
+import type { DuctTerminalNode } from './schema.js';
 /**
  * Pure geometry builder for a duct terminal, in the node's LOCAL frame —
  * `<ParametricNodeRenderer>` applies `position` + yaw, and the builder

package/dist/duct-terminal/geometry.js

@@ -1,6 +1,6 @@
 import { BoxGeometry, CylinderGeometry, Group, Mesh, MeshStandardMaterial, Vector3, } from 'three';
-import { createOvalSectionGeometry, INCHES_TO_METERS } from '../duct-segment/geometry';
-import { COLLAR_LENGTH, mountQuaternion, terminalSystem } from './ports';
+import { createOvalSectionGeometry, INCHES_TO_METERS } from '../duct-segment/geometry.js';
+import { COLLAR_LENGTH, mountQuaternion, terminalSystem } from './ports.js';
 const RADIAL_SEGMENTS = 20;
 /** Radial clearance (meters) the collar sleeve carries over the duct's
  *  nominal cross-section, so a run leaving at the advertised size nests

package/dist/duct-terminal/index.d.ts

@@ -1,5 +1,5 @@
-export { ductTerminalDefinition } from './definition';
-export { buildDuctTerminalGeometry } from './geometry';
-export { getDuctTerminalPorts } from './ports';
-export { DuctTerminalNode } from './schema';
+export { ductTerminalDefinition } from './definition.js';
+export { buildDuctTerminalGeometry } from './geometry.js';
+export { getDuctTerminalPorts } from './ports.js';
+export { DuctTerminalNode } from './schema.js';
 //# sourceMappingURL=index.d.ts.map

package/dist/duct-terminal/index.js

@@ -1,4 +1,4 @@
-export { ductTerminalDefinition } from './definition';
-export { buildDuctTerminalGeometry } from './geometry';
-export { getDuctTerminalPorts } from './ports';
-export { DuctTerminalNode } from './schema';
+export { ductTerminalDefinition } from './definition.js';
+export { buildDuctTerminalGeometry } from './geometry.js';
+export { getDuctTerminalPorts } from './ports.js';
+export { DuctTerminalNode } from './schema.js';

package/dist/duct-terminal/parametrics.d.ts

@@ -1,4 +1,4 @@
 import type { ParametricDescriptor } from '@pascal-app/core';
-import type { DuctTerminalNode } from './schema';
+import type { DuctTerminalNode } from './schema.js';
 export declare const ductTerminalParametrics: ParametricDescriptor<DuctTerminalNode>;
 //# sourceMappingURL=parametrics.d.ts.map

package/dist/duct-terminal/ports.d.ts

@@ -1,6 +1,6 @@
 import type { NodePort } from '@pascal-app/core';
 import { Quaternion } from 'three';
-import type { DuctTerminalNode } from './schema';
+import type { DuctTerminalNode } from './schema.js';
 /** Collar stub length in meters behind the face. */
 export declare const COLLAR_LENGTH = 0.12;
 /**

package/dist/duct-terminal/ports.js

@@ -1,5 +1,5 @@
 import { Euler, Quaternion, Vector3 } from 'three';
-import { equivalentDiameterIn, ovalEquivalentDiameterIn } from '../duct-segment/geometry';
+import { equivalentDiameterIn, ovalEquivalentDiameterIn } from '../duct-segment/geometry.js';
 /** Collar stub length in meters behind the face. */
 export const COLLAR_LENGTH = 0.12;
 /**

package/dist/duct-terminal/tool.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"tool.d.ts","sourceRoot":"","sources":["../../src/duct-terminal/tool.tsx"],"names":[],"mappings":"AAmJA;;;;;;;;;GASG;AACH,QAAA,MAAM,gBAAgB,0CAyYrB,CAAA;AAED,eAAe,gBAAgB,CAAA"}
+{"version":3,"file":"tool.d.ts","sourceRoot":"","sources":["../../src/duct-terminal/tool.tsx"],"names":[],"mappings":"AAyJA;;;;;;;;;GASG;AACH,QAAA,MAAM,gBAAgB,0CAwYrB,CAAA;eAEc,gBAAgB"}

package/dist/duct-terminal/tool.js

@@ -1,20 +1,20 @@
 'use client';
-import { jsx as _jsx, Fragment as _Fragment, jsxs as _jsxs } from "react/jsx-runtime";
+import { Fragment as _Fragment, jsx as _jsx, jsxs as _jsxs } from "react/jsx-runtime";
 import { DuctTerminalNode, emitter, pointInPolygon, resolveCeilingHeight, resolveLevelId, resolveSupportSlabPatch, sceneRegistry, useScene, } from '@pascal-app/core';
-import { CursorSphere, getFloorStackPreviewPosition, getSpatialPointerId, isGridSnapActive, isMagneticSnapActive, triggerSFX, useEditor, } from '@pascal-app/editor';
+import { CursorSphere, getFloorStackPreviewPosition, getSpatialPointerId, isGridSnapActive, isMagneticSnapActive, isTypingTarget, triggerSFX, useEditor, } from '@pascal-app/editor';
+import { alignDrawPoint, clearDrawAlignment, collectScenePorts, findNearestPort3D, } from '@pascal-app/editor/distribution';
 import { useViewer } from '@pascal-app/viewer';
 import { Html } from '@react-three/drei';
 import { useThree } from '@react-three/fiber';
 import { useEffect, useMemo, useRef, useState } from 'react';
 import { Euler, Matrix3, Matrix4, Plane, Quaternion, Raycaster, Vector2, Vector3 } from 'three';
-import { subscribeAccessorySnapping } from '../shared/accessory-snapping';
-import { ConnectionFeedback } from '../shared/connection-feedback';
-import { alignDrawPoint, clearDrawAlignment } from '../shared/draw-alignment';
-import { LevelOffsetGroup } from '../shared/level-offset-group';
-import { collectScenePorts, DUCT_PORT_SYSTEMS, findNearestPort3D } from '../shared/ports';
-import { ductTerminalDefinition } from './definition';
-import { buildDuctTerminalGeometry } from './geometry';
-import { COLLAR_LENGTH, getDuctTerminalPorts, mountQuaternion } from './ports';
+import { subscribeAccessorySnapping } from '../shared/accessory-snapping.js';
+import { ConnectionFeedback } from '../shared/connection-feedback.js';
+import { LevelOffsetGroup } from '../shared/level-offset-group.js';
+import { DUCT_PORT_SYSTEMS } from '../shared/port-systems.js';
+import { ductTerminalDefinition } from './definition.js';
+import { buildDuctTerminalGeometry } from './geometry.js';
+import { COLLAR_LENGTH, getDuctTerminalPorts, mountQuaternion } from './ports.js';
 const PREVIEW_OPACITY = 0.55;
 /** R/T yaw step — 45°. */
 const ROTATE_STEP_RAD = Math.PI / 4;
@@ -371,8 +371,7 @@ const DuctTerminalTool = () => {
                 commit(p);
         };
         const onKeyDown = (e) => {
-            const tag = e.target?.tagName;
-            if (tag === 'INPUT' || tag === 'TEXTAREA')
+            if (isTypingTarget(e.target))
                 return;
             const key = e.key;
             if (key === 'm' || key === 'M') {

package/dist/elevator/definition.d.ts

@@ -1,5 +1,5 @@
 import { type NodeDefinition } from '@pascal-app/core';
-import { ElevatorNode } from './schema';
+import { ElevatorNode } from './schema.js';
 /**
  * Elevator — Stage A registration. Wrap-exports the legacy renderer +
  * the three legacy systems (runtime / interaction / opening) bundled