@pascal-app/editor 1.0.3 → 1.0.4

package/src/components/editor/floor-aware-camera-controls.ts

@@ -0,0 +1,324 @@
+import { CameraControlsImpl } from '@react-three/drei'
+import { Vector3 } from 'three'
+import {
+  floorLimitAt,
+  glideFloorLimit,
+  ORBIT_FLOOR_CLEARANCE,
+  orbitCameraAboveFloor,
+} from '../../lib/orbit-floor-clearance'
+
+const virtualTarget = new Vector3()
+const virtualPosition = new Vector3()
+const groundedPosition = new Vector3()
+const drawnTarget = new Vector3()
+const shiftDelta = new Vector3()
+// Below this height over the level's floor limit the surface under the camera
+// is looked up; higher up it cannot matter.
+const SURFACE_BAND = 3
+// While the limit glides up over a platform's edge, the camera still never
+// sits closer than this to the floor it is over.
+const SURFACE_MIN_GAP = 0.05
+
+/** The walkable surface under the camera (see `FloorSurface`). */
+export type CameraFloorSurface = {
+  /** Changes whenever an earlier answer may no longer hold. */
+  readonly revision: number
+  topAt(x: number, z: number, levelY: number): number | null
+}
+
+/**
+ * Orbit controls whose own state never puts a perspective camera under the
+ * floor surface below it: an orbit past the clearance keeps the camera on it
+ * and pitches the view up (walls do not stop it: it passes through them). The
+ * push and pitch are applied to the controls' own target and angle, so every
+ * reader (`getPosition`, `getTarget`, `camera.position`, truck speed,
+ * snapshots) sees the pose that is drawn. `floorShift` is the
+ * push currently applied; the orbit underneath it is what a later rotate or
+ * zoom continues from, which is why orbiting back up returns the exact
+ * earlier pose.
+ */
+export class FloorAwareCameraControls extends CameraControlsImpl {
+  /**
+   * The active level's floor plus the clearance: the limit where no floor
+   * surface is found under the camera. Null turns the floor off.
+   */
+  floorMinY: number | null = null
+  /** Walkable surface of the active level; the limit follows its top. */
+  floorSurface: CameraFloorSurface | null = null
+  // The floor limit under the camera, eased as the camera crosses floors of
+  // different heights; the last floor found on this level, kept over holes
+  // (a stair void) and through a slab's rebuild; and the last lookup, reused
+  // at rest.
+  private surfaceMinY: number | null = null
+  private surfaceTop: number | null = null
+  private surfaceLevelY: number | null = null
+  private surfaceQuery = { x: Number.NaN, z: Number.NaN, revision: -1, top: null as number | null }
+  private frame = 0
+  private frameDelta = 0
+  private glideFrame = -1
+  private readonly floorShift = new Vector3()
+  // How much steeper the drawn view is than the orbit (the look-up pitch).
+  private polarShift = 0
+  // A pose written with `setLookAt` (applied pose, saved view, snapshot
+  // replay) is shown exactly, even under the clearance; the floor holds at
+  // its height until the orbit heads back above the clearance or the floor
+  // itself changes (another level).
+  private heldMinY: number | null = null
+  private heldFloorMinY: number | null = null
+  private relativeMove = false
+  private relativeRotate = false
+  private readonly floorUpdateEvent = { type: 'update' }
+  /** The lowest the camera may sit right now: the clearance above the floor under it. */
+  get floorLimitY() {
+    return this.surfaceMinY ?? this.floorMinY
+  }
+
+  // Level navigation translates the orbit's floor, rather than its pushed target.
+  getOrbitTarget(out: Vector3) {
+    return this.getTarget(out).sub(this.floorShift)
+  }
+
+  /** The orbit's own polar angle, under the floor's look-up pitch. */
+  get orbitPolarAngle() {
+    return this._spherical.phi - this.polarShift
+  }
+
+  // Back to the orbit under the floor's push and pitch. Nothing is drawn in
+  // between: the next update re-derives the same drawn pose from it.
+  private dropFloorShift() {
+    this._target.sub(this.floorShift)
+    this._targetEnd.sub(this.floorShift)
+    this._spherical.phi -= this.polarShift
+    this._sphericalEnd.phi -= this.polarShift
+    this.floorShift.set(0, 0, 0)
+    this.polarShift = 0
+  }
+
+  override moveTo(x: number, y: number, z: number, enableTransition = false) {
+    // Absolute destinations replace the orbit; trucks keep its remembered push.
+    if (!this.relativeMove) {
+      // Travel from the orbit under the push, not from the pushed target: the
+      // push is recomputed on the way, so nothing jumps, and a low camera
+      // does not start the trip lifted above its orbit.
+      this.dropFloorShift()
+      this.heldMinY = null
+    }
+    return super.moveTo(x, y, z, enableTransition)
+  }
+
+  override fitToBox(...args: Parameters<CameraControlsImpl['fitToBox']>) {
+    // Framing starts from the orbit, not from the floor's look-up pitch.
+    this.dropFloorShift()
+    return super.fitToBox(...args)
+  }
+
+  override rotate(azimuthAngle: number, polarAngle: number, enableTransition = false) {
+    this.relativeRotate = true
+    try {
+      return super.rotate(azimuthAngle, polarAngle, enableTransition)
+    } finally {
+      this.relativeRotate = false
+    }
+  }
+
+  override rotateTo(azimuthAngle: number, polarAngle: number, enableTransition = false) {
+    // An absolute angle is the orbit's; drags (`rotate`) keep the look-up pitch.
+    if (!this.relativeRotate) this.dropFloorShift()
+    return super.rotateTo(azimuthAngle, polarAngle, enableTransition)
+  }
+
+  override truck(x: number, y: number, enableTransition = false) {
+    this.relativeMove = true
+    try {
+      return super.truck(x, y, enableTransition)
+    } finally {
+      this.relativeMove = false
+    }
+  }
+
+  override forward(distance: number, enableTransition = false) {
+    this.relativeMove = true
+    try {
+      return super.forward(distance, enableTransition)
+    } finally {
+      this.relativeMove = false
+    }
+  }
+
+  override elevate(height: number, enableTransition = false) {
+    this.relativeMove = true
+    try {
+      return super.elevate(height, enableTransition)
+    } finally {
+      this.relativeMove = false
+    }
+  }
+
+  override setLookAt(
+    positionX: number,
+    positionY: number,
+    positionZ: number,
+    targetX: number,
+    targetY: number,
+    targetZ: number,
+    enableTransition = false,
+  ) {
+    const done = super.setLookAt(
+      positionX,
+      positionY,
+      positionZ,
+      targetX,
+      targetY,
+      targetZ,
+      enableTransition,
+    )
+    this.floorShift.set(0, 0, 0)
+    this.polarShift = 0
+    this.heldMinY = positionY
+    this.heldFloorMinY = this.floorMinY
+    return done
+  }
+
+  override update(delta: number): boolean {
+    // The base constructor runs one update before this class's fields exist.
+    if (this.floorShift !== undefined) {
+      this.frame += 1
+      this.frameDelta = delta
+    }
+    const updated = super.update(delta)
+    // The base constructor runs one update before this class's fields exist.
+    if (this.floorShift !== undefined && this.keepAboveFloor() && !updated) {
+      super.dispatchEvent(this.floorUpdateEvent)
+      return true
+    }
+    return updated
+  }
+
+  override dispatchEvent(event: Parameters<CameraControlsImpl['dispatchEvent']>[0]) {
+    // Base update listeners run before update returns; publish the drawn pose.
+    if (event.type === 'update' && this.floorShift !== undefined) this.keepAboveFloor()
+    super.dispatchEvent(event)
+  }
+
+  private keepAboveFloor() {
+    const floorMinY = 'isOrthographicCamera' in this._camera ? null : this.floorMinY
+    if (floorMinY === null) {
+      // Floor off: what is drawn becomes the orbit, so turning it back on
+      // never jumps.
+      this.floorShift.set(0, 0, 0)
+      this.polarShift = 0
+      this.heldMinY = null
+      this.forgetFloorSurface()
+      return false
+    }
+
+    const levelY = floorMinY - ORBIT_FLOOR_CLEARANCE
+    if (levelY !== this.surfaceLevelY) {
+      this.forgetFloorSurface()
+      this.surfaceLevelY = levelY
+    }
+    const knownLimitY = this.surfaceMinY ?? floorMinY
+    const endCameraY =
+      this._targetEnd.y -
+      this.floorShift.y +
+      this._sphericalEnd.radius * Math.cos(this._sphericalEnd.phi - this.polarShift)
+    if (this.heldFloorMinY !== floorMinY || endCameraY >= knownLimitY) {
+      this.heldMinY = null
+      this.heldFloorMinY = floorMinY
+    }
+    // The orbit never aims below the level's floor: the pivot's destination is
+    // lifted, so a transition toward it glides rather than jumps.
+    const pivotEndY = this._targetEnd.y - this.floorShift.y
+    if (this.heldMinY === null && pivotEndY < levelY) {
+      this._targetEnd.y += levelY - pivotEndY
+      this._needsUpdate = true
+    }
+
+    const { radius, theta } = this._spherical
+    const orbitPolar = this._spherical.phi - this.polarShift
+    virtualTarget.copy(this._target).sub(this.floorShift)
+    virtualPosition.setFromSphericalCoords(radius, orbitPolar, theta).add(virtualTarget)
+    // Where the camera is headed at the limit known so far; then the floor
+    // under that spot, in the same pass, so no motion skips the lookup.
+    let minY = this.heldLimit(knownLimitY)
+    let drawnPolar = orbitCameraAboveFloor(groundedPosition, virtualPosition, virtualTarget, minY)
+    const limitY = this.resolveFloorLimit(groundedPosition, levelY)
+    if (limitY !== knownLimitY) {
+      minY = this.heldLimit(limitY)
+      drawnPolar = orbitCameraAboveFloor(groundedPosition, virtualPosition, virtualTarget, minY)
+    }
+    // The drawn target sits the orbit's distance out along the drawn view.
+    drawnTarget.setFromSphericalCoords(radius, drawnPolar, theta).negate().add(groundedPosition)
+    shiftDelta.subVectors(drawnTarget, this._target)
+    const polarDelta = drawnPolar - orbitPolar - this.polarShift
+    if (shiftDelta.lengthSq() < 1e-12 && Math.abs(polarDelta) < 1e-9) return false
+
+    this._target.add(shiftDelta)
+    this._targetEnd.add(shiftDelta)
+    this._spherical.phi += polarDelta
+    this._sphericalEnd.phi += polarDelta
+    this.floorShift.add(shiftDelta)
+    this.polarShift += polarDelta
+    this._camera.position.copy(groundedPosition)
+    this._camera.lookAt(this._target)
+    this._needsUpdate = true
+    return true
+  }
+
+  /**
+   * The user has taken over: a written pose under the clearance stops being
+   * held, and the limit eases up from where the camera is rather than popping.
+   */
+  releaseWrittenPose() {
+    if (this.heldMinY === null) return
+    this.heldMinY = null
+    const y = this._camera.position.y
+    this.surfaceMinY = Math.min(this.surfaceMinY ?? y, y)
+  }
+
+  // A written pose may sit under the clearance, but not under the floor itself.
+  private heldLimit(limitY: number) {
+    if (this.heldMinY === null) return limitY
+    return Math.min(limitY, Math.max(this.heldMinY, limitY - ORBIT_FLOOR_CLEARANCE))
+  }
+
+  private forgetFloorSurface() {
+    this.surfaceMinY = null
+    this.surfaceTop = null
+    this.surfaceQuery.revision = -1
+  }
+
+  /**
+   * The floor limit at `position`: the clearance above the floor surface under
+   * it, eased once per frame as the floor height changes. Over a hole, or
+   * while a slab is rebuilt, the last floor found on this level holds; with
+   * none found yet, the level's own floor does. Far above the floor nothing
+   * is cast and the floor is forgotten.
+   */
+  private resolveFloorLimit(position: Vector3, levelY: number) {
+    const surface = this.floorSurface
+    if (!surface || position.y > levelY + ORBIT_FLOOR_CLEARANCE + SURFACE_BAND) {
+      this.forgetFloorSurface()
+      return levelY + ORBIT_FLOOR_CLEARANCE
+    }
+
+    const query = this.surfaceQuery
+    const revision = surface.revision
+    if (position.x !== query.x || position.z !== query.z || revision !== query.revision) {
+      query.x = position.x
+      query.z = position.z
+      query.revision = revision
+      query.top = surface.topAt(position.x, position.z, levelY)
+      if (query.top !== null) this.surfaceTop = query.top
+    }
+    const floorTop = this.surfaceTop ?? levelY
+    const step = this.glideFrame === this.frame ? 0 : this.frameDelta
+    this.glideFrame = this.frame
+    const limit = Math.max(
+      glideFloorLimit(this.surfaceMinY, floorLimitAt(floorTop, levelY), step),
+      floorTop + SURFACE_MIN_GAP,
+    )
+    this.surfaceMinY = limit
+    return limit
+  }
+}

package/src/components/editor/floor-openings-overlay.tsx

@@ -0,0 +1,243 @@
+'use client'
+
+import {
+  type AnyNode,
+  type AnyNodeId,
+  type FloorOpeningNode,
+  resolveCeilingHeight,
+  sceneRegistry,
+  useScene,
+} from '@pascal-app/core'
+import { useViewer } from '@pascal-app/viewer'
+import { type ThreeEvent, useFrame } from '@react-three/fiber'
+import { useEffect, useMemo, useRef } from 'react'
+import {
+  BufferGeometry,
+  DoubleSide,
+  Float32BufferAttribute,
+  type Group,
+  ShapeUtils,
+  Vector2,
+} from 'three'
+import { LineBasicNodeMaterial, MeshBasicNodeMaterial } from 'three/webgpu'
+import { useCeilingEditSession } from '../../lib/ceiling-edit-session'
+import { EDITOR_LAYER } from '../../lib/constants'
+import { openingRoom, roomSurfaceOpenings, useFloorEditSession } from '../../lib/floor-edit-session'
+import { useOpeningDraft } from '../../lib/floor-opening-draft'
+import { roomFloorElevation } from '../../lib/room-handle-drag'
+import { PolygonEditor } from '../tools/shared/polygon-editor'
+
+// The openings of the room being edited ("Edit floor", "Edit ceiling", or a
+// "Cut opening" in progress), outlined where they cut: amber, a light fill to
+// click them by, and the selected one's corner handles. Openings are intent
+// nodes with no mesh of their own — the surfaces they cut show the void.
+
+const COLOR = '#f59e0b'
+const LIFT = 0.015
+
+type Nodes = Readonly<Record<string, AnyNode>>
+
+/** Where an opening is drawn: its room's floor, or the ceiling it was drawn on. */
+export function openingElevation(nodes: Nodes, opening: FloorOpeningNode): number {
+  if (opening.hostZoneId) return roomFloorElevation(nodes, opening.hostZoneId)
+  const zoneId = openingRoom(nodes, opening)
+  if (opening.drawnOn === 'ceiling') {
+    const ceiling = Object.values(nodes).find(
+      (node) =>
+        node.type === 'ceiling' && node.parentId === opening.parentId && node.zoneId === zoneId,
+    )
+    return ceiling?.type === 'ceiling'
+      ? resolveCeilingHeight(ceiling, nodes as Record<AnyNodeId, AnyNode>)
+      : 2.5
+  }
+  return zoneId ? roomFloorElevation(nodes, zoneId) : 0.05
+}
+
+function useShownOpenings(): { levelId: string | null; openings: FloorOpeningNode[] } {
+  const nodes = useScene((s) => s.nodes)
+  const floorSession = useFloorEditSession((s) => s.session)
+  const ceilingSession = useCeilingEditSession((s) => s.session)
+  const draftHost = useOpeningDraft((s) => s.host)
+  const selectedId = useViewer((s) =>
+    s.selection.selectedIds.length === 1 ? s.selection.selectedIds[0] : null,
+  )
+  return useMemo(() => {
+    const shown = new Map<string, FloorOpeningNode>()
+    const add = (list: FloorOpeningNode[]) => {
+      for (const opening of list) shown.set(opening.id, opening)
+    }
+    let levelId: string | null = null
+    if (floorSession) {
+      add(roomSurfaceOpenings(nodes, floorSession.zoneId, 'floor'))
+      levelId = floorSession.levelId
+    }
+    if (ceilingSession?.zoneId) {
+      add(roomSurfaceOpenings(nodes, ceilingSession.zoneId, 'ceiling'))
+      levelId = ceilingSession.levelId
+    }
+    if (draftHost) {
+      add(roomSurfaceOpenings(nodes, draftHost.zoneId, draftHost.drawnOn))
+      levelId = draftHost.levelId
+    }
+    const selected = selectedId ? nodes[selectedId as AnyNodeId] : undefined
+    if (selected?.type === 'floor-opening') {
+      shown.set(selected.id, selected)
+      levelId = selected.parentId
+    }
+    return {
+      levelId,
+      openings: [...shown.values()].filter((opening) => opening.parentId === levelId),
+    }
+  }, [nodes, floorSession, ceilingSession, draftHost, selectedId])
+}
+
+function outlineGeometry(polygon: FloorOpeningNode['polygon'], y: number) {
+  const positions: number[] = []
+  polygon.forEach((a, i) => {
+    const b = polygon[(i + 1) % polygon.length]!
+    positions.push(a[0], y, a[1], b[0], y, b[1])
+  })
+  const geometry = new BufferGeometry()
+  geometry.setAttribute('position', new Float32BufferAttribute(positions, 3))
+  return geometry
+}
+
+function fillGeometry(polygon: FloorOpeningNode['polygon'], y: number) {
+  const contour = polygon.map(([x, z]) => new Vector2(x, z))
+  const positions: number[] = []
+  for (const triangle of ShapeUtils.triangulateShape(contour, []))
+    for (const index of triangle) positions.push(contour[index]!.x, y, contour[index]!.y)
+  const geometry = new BufferGeometry()
+  geometry.setAttribute('position', new Float32BufferAttribute(positions, 3))
+  return geometry
+}
+
+function OpeningOutline({
+  opening,
+  elevation,
+  selected,
+  materials,
+}: {
+  opening: FloorOpeningNode
+  elevation: number
+  selected: boolean
+  materials: {
+    line: LineBasicNodeMaterial
+    fill: MeshBasicNodeMaterial
+    fillSelected: MeshBasicNodeMaterial
+  }
+}) {
+  const geometry = useMemo(
+    () => ({
+      line: outlineGeometry(opening.polygon, elevation + LIFT),
+      fill: fillGeometry(opening.polygon, elevation + LIFT),
+    }),
+    [opening.polygon, elevation],
+  )
+  useEffect(
+    () => () => {
+      geometry.line.dispose()
+      geometry.fill.dispose()
+    },
+    [geometry],
+  )
+  const select = (event: ThreeEvent<MouseEvent>) => {
+    event.stopPropagation()
+    useViewer.getState().setSelection({ selectedIds: [opening.id] })
+  }
+  return (
+    <group data-floor-opening={opening.id}>
+      <lineSegments
+        geometry={geometry.line}
+        layers={EDITOR_LAYER}
+        material={materials.line}
+        raycast={() => {}}
+        renderOrder={1001}
+      />
+      <mesh
+        geometry={geometry.fill}
+        layers={EDITOR_LAYER}
+        material={selected ? materials.fillSelected : materials.fill}
+        onClick={select}
+        renderOrder={1000}
+      />
+    </group>
+  )
+}
+
+export function FloorOpeningsOverlay3D() {
+  const { levelId, openings } = useShownOpenings()
+  const nodes = useScene((s) => s.nodes)
+  const readOnly = useScene((s) => s.readOnly)
+  const selectedId = useViewer((s) =>
+    s.selection.selectedIds.length === 1 ? s.selection.selectedIds[0] : null,
+  )
+  const root = useRef<Group>(null)
+  const materials = useMemo(
+    () => ({
+      line: new LineBasicNodeMaterial({ color: COLOR, depthTest: false, depthWrite: false }),
+      fill: new MeshBasicNodeMaterial({
+        color: COLOR,
+        depthTest: false,
+        depthWrite: false,
+        opacity: 0.12,
+        side: DoubleSide,
+        transparent: true,
+      }),
+      fillSelected: new MeshBasicNodeMaterial({
+        color: COLOR,
+        depthTest: false,
+        depthWrite: false,
+        opacity: 0.28,
+        side: DoubleSide,
+        transparent: true,
+      }),
+    }),
+    [],
+  )
+  useEffect(
+    () => () => {
+      materials.line.dispose()
+      materials.fill.dispose()
+      materials.fillSelected.dispose()
+    },
+    [materials],
+  )
+  useFrame(() => {
+    const level = levelId ? sceneRegistry.nodes.get(levelId) : null
+    if (!root.current) return
+    root.current.visible = !!level
+    if (level) {
+      level.updateWorldMatrix(true, false)
+      root.current.matrix.copy(level.matrixWorld)
+    }
+  })
+  if (!levelId || openings.length === 0) return null
+  const selected = openings.find((opening) => opening.id === selectedId) ?? null
+  return (
+    <>
+      <group matrixAutoUpdate={false} ref={root}>
+        {openings.map((opening) => (
+          <OpeningOutline
+            elevation={openingElevation(nodes, opening)}
+            key={opening.id}
+            materials={materials}
+            opening={opening}
+            selected={opening.id === selectedId}
+          />
+        ))}
+      </group>
+      {selected && !readOnly && selected.source !== 'stair' && selected.source !== 'elevator' && (
+        <PolygonEditor
+          allowEdgeMove
+          color={COLOR}
+          levelId={levelId}
+          minVertices={3}
+          onPolygonChange={(polygon) => useScene.getState().updateNode(selected.id, { polygon })}
+          polygon={selected.polygon}
+          surfaceHeight={openingElevation(nodes, selected)}
+        />
+      )}
+    </>
+  )
+}