@opengsd/gsd-core 1.11.0 → 1.12.0

package/gsd-core/workflows/resume-project.md

@@ -20,7 +20,7 @@ Instantly restore full project context so "Where were we?" has an immediate, com
 Load all context in one call:
 
 ```bash
-_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
+_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; _gsd_at() { for _p; do if [ -f "$_p" ]; then GSD_TOOLS="$_p"; return 0; fi; done; return 1; }; if _gsd_at "${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif unset -f gsd_run; _G="$(command -v gsd_run)"; then GSD_TOOLS="$_G"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif _gsd_at "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd_run is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; GSD_IDENTITY_STATUS=unverified; case "$(gsd_run runtime-identity --raw 2>/dev/null || true)" in '{"packageName":"@opengsd/gsd-core"'*'}') GSD_IDENTITY_STATUS=ok;; esac; export GSD_IDENTITY_STATUS; [ "$GSD_IDENTITY_STATUS" = ok ] || echo "WARNING: \"$GSD_TOOLS\" did not prove it is @opengsd/gsd-core - it is either a different package or an @opengsd/gsd-core older than the runtime-identity verb. See docs/how-to/diagnose-a-foreign-gsd-tools.md" >&2; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
 INIT=$(gsd_run query init.resume)
 if [[ "$INIT" == @file:* ]]; then INIT=$(cat "${INIT#@file:}"); fi
 ```
@@ -133,17 +133,13 @@ fi
 Present complete project status to user:
 
 ```
-╔══════════════════════════════════════════════════════════════╗
-║  PROJECT STATUS                                               ║
-╠══════════════════════════════════════════════════════════════╣
-║  Building: [one-liner from PROJECT.md "What This Is"]         ║
-║                                                               ║
-║  Phase: [X] of [Y] - [Phase name]                            ║
-║  Plan:  [A] of [B] - [Status]                                ║
-║  Progress: [██████░░░░] XX%                                  ║
-║                                                               ║
-║  Last activity: [date] - [what happened]                     ║
-╚══════════════════════════════════════════════════════════════╝
+### PROJECT STATUS
+
+Building: [one-liner from PROJECT.md "What This Is"]
+Phase: [X] of [Y] - [Phase name]
+Plan:  [A] of [B] - [Status]
+Progress: [██████░░░░] XX%
+Last activity: [date] - [what happened]
 
 [If incomplete work found:]
 ⚠️  Incomplete work detected:

package/gsd-core/workflows/review.md

@@ -14,7 +14,7 @@ A plan that survives review from 2-3 independent AI systems is more robust.
 Check which AI CLIs are available on the system:
 
 ```bash
-_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
+_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; _gsd_at() { for _p; do if [ -f "$_p" ]; then GSD_TOOLS="$_p"; return 0; fi; done; return 1; }; if _gsd_at "${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif unset -f gsd_run; _G="$(command -v gsd_run)"; then GSD_TOOLS="$_G"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif _gsd_at "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd_run is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; GSD_IDENTITY_STATUS=unverified; case "$(gsd_run runtime-identity --raw 2>/dev/null || true)" in '{"packageName":"@opengsd/gsd-core"'*'}') GSD_IDENTITY_STATUS=ok;; esac; export GSD_IDENTITY_STATUS; [ "$GSD_IDENTITY_STATUS" = ok ] || echo "WARNING: \"$GSD_TOOLS\" did not prove it is @opengsd/gsd-core - it is either a different package or an @opengsd/gsd-core older than the runtime-identity verb. See docs/how-to/diagnose-a-foreign-gsd-tools.md" >&2; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
 # Check each CLI
 command -v gemini >/dev/null 2>&1 && echo "gemini:available" || echo "gemini:missing"
 command -v claude >/dev/null 2>&1 && echo "claude:available" || echo "claude:missing"
@@ -316,7 +316,11 @@ reintroduce the flag (even spelled out in prose — a regression test bans the l
 If `section_manifest` is `null` or `"reviewer-instances-note-2"` is in its `included` list: read and execute `gsd-core/workflows/review/steps/reviewer-instances-note-2.md`. Otherwise skip — do not read the file.
 <!-- /gsd:section -->
 
-Lanes run **sequentially, not in parallel** — concurrent invocation trips provider rate limits.
+Lanes run **sequentially by default** — concurrent invocation trips provider rate limits, and a lane
+lost to one is a cross-AI review that quietly went blind in one eye. A project whose providers can
+accept the concurrency opts in with `review.parallel_lanes: true` (#3034): the selected lanes are
+dispatched together and **all** joined before aggregation. The default is unchanged, and convergence
+cycles stay sequential either way — only the lanes *within* one pass overlap.
 
 ```bash
 # #2962: zsh aborts the block on an unmatched for-list glob (nomatch); bash passes it through. nullglob both.
@@ -327,6 +331,13 @@ REPO_ROOT="$(git rev-parse --show-toplevel 2>/dev/null || pwd)"
 # SELECTED_REVIEWERS is the comma-separated result of reviewer selection (ADR-0011 precedence:
 # explicit flags > --all > review.default_reviewers > all detected). Unchanged by this phase.
 
+# #3034: opt-in concurrent lane dispatch. STRICT equality on "true" is deliberate — "1", "yes" and
+# "TRUE" must NOT opt in, so a mistyped config gets the conservative behaviour rather than firing
+# concurrent requests at a rate-limited provider. Note the `|| echo "false"` fallback is the
+# OPPOSITE polarity from the commit_docs guard, which fails OPEN: there, failing open preserves the
+# user's intent; here it would fire exactly the requests the default exists to prevent.
+PARALLEL_LANES=$(gsd_run query config-get review.parallel_lanes --raw 2>/dev/null || echo "false")
+
 # Shared budget-trim helper. Was defined inside the Ollama leg; it is lane-agnostic, so it is
 # hoisted here now that any lane may declare a promptBudgetKey. Returns non-zero when the budget
 # is too small for the minimum review set (prompt-budget exit 2 / 11).
@@ -360,7 +371,20 @@ gsd_run query review-lane plan \
   --selected "$SELECTED_REVIEWERS" --run-dir "$RUN_DIR" --repo-root "$REPO_ROOT" --json \
   > "$RUN_DIR/gsd-review-lanes.json"
 
-for SLUG in $(echo "$SELECTED_REVIEWERS" | tr ',' ' '); do
+# One lane, start to finish. Hoisted into a function so the sequential and concurrent paths share
+# ONE body: two dispatch bodies kept in sync by hand is the generative-fix divergence ADR-2782 spent
+# a phase deleting, and it is what let #2494/#2605 be filed twice as the same defect.
+#
+# The result goes to a SLUG-SCOPED file, never a shared append. Concurrent O_APPEND is atomic only
+# below PIPE_BUF (4096 on Linux, 512 on some platforms), so a lane result above that bound could
+# interleave — and write_reviews parses this JSONL to render the models:/model_sources: frontmatter,
+# so a torn line is a broken REVIEWS.md, not a cosmetic log defect.
+run_review_lane() {
+  # `local` is hygiene, not a live fix: each `&`-dispatched call already forks its own subshell, so
+  # concurrent lanes cannot share these today. Scoped anyway so the isolation is a property of this
+  # function rather than of the dispatch mechanism happening to fork.
+  local SLUG LANE_BUDGET PROMPT_ARG TRIMMED
+  SLUG="$1"
   # Per-lane prompt budget. The lane declares its own `promptBudgetKey`; `plan` resolved it,
   # applying #2797's sentinel rule (-1 = unset → fall back to the global budget; 0 legitimately
   # means "do not trim this lane"). Trimming itself stays in prompt-budget, which owns it.
@@ -378,7 +402,9 @@ for SLUG in $(echo "$SELECTED_REVIEWERS" | tr ',' ' '); do
       # response used to (#2605), so leave the skip visible in the review output, not only on stderr.
       echo "$SLUG review skipped: prompt budget (${LANE_BUDGET} tokens) too small for the minimum review set." \
         > "$RUN_DIR/gsd-review-$SLUG.md"
-      continue
+      # Was `continue` when this was a loop body. Inside a function that keyword is not the loop
+      # control it looks like — `return 0` is what skips this lane and leaves it with no result line.
+      return 0
     fi
   fi
 
@@ -387,7 +413,50 @@ for SLUG in $(echo "$SELECTED_REVIEWERS" | tr ',' ' '); do
   # normal, failing to run one somebody asked for is an error.
   gsd_run query review-lane invoke --slug "$SLUG" \
     --run-dir "$RUN_DIR" --repo-root "$REPO_ROOT" $PROMPT_ARG $EXPLICIT_FLAG --json \
-    >> "$RUN_DIR/gsd-review-lane-results.jsonl"
+    > "$RUN_DIR/gsd-review-lane-result-$SLUG.json"
+}
+
+# Split ONCE, de-duplicated, and reuse for both loops below. Two reasons, and the second is
+# load-bearing: a slug repeated in SELECTED_REVIEWERS would put TWO concurrent background jobs on
+# `> "$RUN_DIR/gsd-review-lane-result-$SLUG.json"` — the same file, both truncating. The shared-append
+# form this replaced could not corrupt itself that way, so de-duping is what keeps the concurrent
+# path no worse than the sequential one. Selection de-dupes today (the roster is a Set;
+# review.default_reviewers normalizes lowercase-unique), but reachability analysis is not a contract
+# and the next caller should not have to redo it.
+#
+# A plain string accumulator, not an array: zsh and bash disagree on array indexing and this block
+# runs under both (see the nullglob/NULL_GLOB pairing above).
+DISPATCH_SLUGS=""
+for SLUG in $(echo "$SELECTED_REVIEWERS" | tr ',' ' '); do
+  case " $DISPATCH_SLUGS " in
+    *" $SLUG "*) continue ;;
+  esac
+  DISPATCH_SLUGS="$DISPATCH_SLUGS $SLUG"
+done
+
+for SLUG in $DISPATCH_SLUGS; do
+  if [ "$PARALLEL_LANES" = "true" ]; then
+    run_review_lane "$SLUG" &
+  else
+    run_review_lane "$SLUG"
+  fi
+done
+
+# Join every dispatched lane. A bare `wait` with no background jobs returns 0, so the sequential
+# path needs no guard around it. NOTHING below this line may run before every lane has finished —
+# write_reviews renders REVIEWS.md and the consensus summary from the aggregate below, and a review
+# assembled from a partial set looks complete while silently missing a reviewer.
+wait
+
+# Aggregate in SELECTED_REVIEWERS order, NOT completion order, so the JSONL a concurrent run
+# produces is byte-identical to the one a sequential run produces. This is post-join and therefore
+# single-threaded, so `>>` here is safe. A lane that was budget-skipped, or that never started,
+# leaves no result file and correctly contributes no line.
+for SLUG in $DISPATCH_SLUGS; do
+  LANE_RESULT="$RUN_DIR/gsd-review-lane-result-$SLUG.json"
+  if [ -f "$LANE_RESULT" ]; then
+    cat "$LANE_RESULT" >> "$RUN_DIR/gsd-review-lane-results.jsonl"
+  fi
 done
 ```
 
@@ -404,9 +473,7 @@ blocked, not silently redirected** (ADR-2782 D5).
 
 Display progress:
 ```
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- GSD ► CROSS-AI REVIEW — Phase {N}
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+### GSD ► CROSS-AI REVIEW — Phase {N}
 
 ◆ Reviewing with {CLI}... done ✓
 ◆ Reviewing with {CLI}... done ✓
@@ -414,6 +481,61 @@ Display progress:
 </step>
 
 <step name="write_reviews">
+**#3352 (ADR-3473 §8.5): no artifact from failed inputs.** Before rendering anything, gate on
+whether any lane actually produced a result — "every lane failed" is exactly "the aggregate
+JSONL has zero lines" (§`invoke_reviewers`'s aggregation loop already builds this file as a
+byproduct; a lane that never started or was budget-skipped contributes no line either way).
+
+```bash
+RUN_DIR="{run_dir}"
+JSONL="$RUN_DIR/gsd-review-lane-results.jsonl"
+LANE_LINES=0
+[ -f "$JSONL" ] && LANE_LINES=$(wc -l < "$JSONL" | tr -d ' ')
+
+TOTAL_LANE_FAILURE="false"
+ALL_LANES_SKIPPED="false"
+if [ "${LANE_LINES:-0}" -eq 0 ]; then
+  # Zero lines means every dispatched lane left no result JSON — either every one
+  # was budget-skipped (N5: a skip is not a failure) or every one actually failed
+  # to run. Re-derive the dispatched-slug set the same way invoke_reviewers did
+  # (SELECTED_REVIEWERS is a shell block boundary — recompute, do not assume the
+  # earlier step's local DISPATCH_SLUGS variable survived into this block).
+  DISPATCH_SLUGS=""
+  for SLUG in $(echo "$SELECTED_REVIEWERS" | tr ',' ' '); do
+    case " $DISPATCH_SLUGS " in
+      *" $SLUG "*) continue ;;
+    esac
+    DISPATCH_SLUGS="$DISPATCH_SLUGS $SLUG"
+  done
+  # Distinguish by whether every dispatched slug's stub markdown says "skipped":
+  # a skip stub always does (see run_review_lane's budget branch, which writes
+  # this exact text before returning without ever invoking the lane); a real
+  # failure stub does not. If a slug has no stub at all, it is not a skip.
+  DISPATCHED_COUNT=0
+  SKIPPED_COUNT=0
+  for SLUG in $DISPATCH_SLUGS; do
+    DISPATCHED_COUNT=$((DISPATCHED_COUNT + 1))
+    STUB="$RUN_DIR/gsd-review-$SLUG.md"
+    if [ -f "$STUB" ] && grep -q "review skipped: prompt budget" "$STUB" 2>/dev/null; then
+      SKIPPED_COUNT=$((SKIPPED_COUNT + 1))
+    fi
+  done
+  if [ "$DISPATCHED_COUNT" -gt 0 ] && [ "$SKIPPED_COUNT" -eq "$DISPATCHED_COUNT" ]; then
+    ALL_LANES_SKIPPED="true"
+  else
+    TOTAL_LANE_FAILURE="true"
+  fi
+fi
+```
+
+- **If `ALL_LANES_SKIPPED=true`:** do NOT write `REVIEWS.md` and do NOT run the commit below —
+  there is nothing to review. Report to the user that every selected lane was budget-skipped
+  (not a failure) and stop; do not proceed to `present_results`' summary claiming a review ran.
+- **If `TOTAL_LANE_FAILURE=true`:** do NOT write `REVIEWS.md` and do NOT run the commit below.
+  Report the total lane failure to the user (name the lanes that were dispatched and point at
+  their `.err`/stub files preserved under `.review-diagnostics/` by `present_results`) and stop.
+- **Otherwise** (at least one lane produced a result — R1, unchanged): proceed exactly as below.
+
 Combine all review responses into `{phase_dir}/{padded_phase}-REVIEWS.md`:
 
 After all reviewers complete, collect trim metadata files written during the run. For each reviewer that was trimmed (i.e. a `.metadata.json` file exists and `hardFailed` or `omitted` is non-empty, or `projectMdShrunk` is true, or `planTruncationPct > 0`), include a `trimmed_reviewers` block in the frontmatter. Omit the key entirely if no reviewer was trimmed.
@@ -497,19 +619,33 @@ trimmed_reviewers:        # only present if at least one reviewer was trimmed
 {where reviewers disagreed — worth investigating}
 ```
 
-Commit:
+Commit (only reached when `TOTAL_LANE_FAILURE` and `ALL_LANES_SKIPPED` are both `false` — the
+gate above):
 ```bash
 gsd_run query commit "docs: cross-AI review for phase {N}" --files {phase_dir}/{padded_phase}-REVIEWS.md
 ```
 </step>
 
 <step name="present_results">
-Display summary:
+**If `write_reviews` set `TOTAL_LANE_FAILURE=true` or `ALL_LANES_SKIPPED=true`, skip the success
+summary below entirely** — no `REVIEWS.md` was written or committed, so there is nothing to
+present as complete. Report instead:
+
+```
+### GSD ► REVIEW FAILED
+
+Phase {N}: every selected reviewer lane {failed to produce a result|was budget-skipped} — no
+REVIEWS.md was written.
+
+{If the preserve+cleanup block below reports success: "Diagnostics preserved:
+{phase_dir}/.review-diagnostics/". If it reports failure: relay its own warning verbatim —
+it names the intact run directory holding the un-preserved evidence instead.}
+```
+
+Otherwise (at least one lane succeeded), display summary:
 
 ```
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- GSD ► REVIEW COMPLETE
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+### GSD ► REVIEW COMPLETE
 
 Phase {N} reviewed by {count} AI systems.
 
@@ -522,10 +658,52 @@ To incorporate feedback into planning:
   /gsd:plan-phase {N} --reviews
 ```
 
-Clean up — remove the run's temp directory now that REVIEWS.md is committed:
+**#3352 (ADR-3473 §8.5, R3): preserve per-lane evidence before destroying it.** Regardless of
+which branch above ran, the run's temp directory is the only record that a lane failed at all —
+copy it beside the phase's artifacts BEFORE cleanup. A lane that produced no output at all (L4)
+leaves nothing to preserve; that is a smaller diagnostics folder, not a fabricated one, and is
+NOT a preservation failure. This copy is deliberately NOT part of the commit above (N6) — that
+step names only `{padded_phase}-REVIEWS.md` explicitly, never a directory glob, so
+`.review-diagnostics/` is never swept into it.
+
+Preservation and cleanup MUST run in the same fenced block below (a shell variable cannot
+survive across separate fences — each is its own process). `mkdir -p` and every `cp` are
+exit-status checked; `rm -rf "$RUN_DIR"` runs ONLY if nothing was preserved (nothing to
+preserve is not a failure) or everything that needed preserving was copied successfully. If
+preservation fails partway, `$RUN_DIR` is left intact and a message names it as the location of
+the un-preserved evidence — a leftover temp directory is far cheaper than destroyed evidence:
 
 ```bash
-rm -rf "{run_dir}"
+shopt -s nullglob 2>/dev/null; setopt NULL_GLOB 2>/dev/null
+
+RUN_DIR="{run_dir}"
+DIAG_DIR="{phase_dir}/.review-diagnostics"
+
+_DIAG_MD=( "$RUN_DIR"/gsd-review-*.md )
+_DIAG_ERR=()
+for f in "$RUN_DIR"/gsd-review-*.err; do
+  [ -s "$f" ] && _DIAG_ERR+=("$f")
+done
+
+_PRESERVE_OK=true
+if [ ${#_DIAG_MD[@]} -gt 0 ] || [ ${#_DIAG_ERR[@]} -gt 0 ]; then
+  if mkdir -p "$DIAG_DIR"; then
+    if [ ${#_DIAG_MD[@]} -gt 0 ] && ! cp "${_DIAG_MD[@]}" "$DIAG_DIR/"; then
+      _PRESERVE_OK=false
+    fi
+    if [ ${#_DIAG_ERR[@]} -gt 0 ] && ! cp "${_DIAG_ERR[@]}" "$DIAG_DIR/"; then
+      _PRESERVE_OK=false
+    fi
+  else
+    _PRESERVE_OK=false
+  fi
+fi
+
+if [ "$_PRESERVE_OK" = "true" ]; then
+  rm -rf "$RUN_DIR"
+else
+  echo "WARNING: evidence preservation to $DIAG_DIR failed — leaving the un-preserved run directory intact at: $RUN_DIR" >&2
+fi
 ```
 </step>
 

package/gsd-core/workflows/scan.md

@@ -39,7 +39,7 @@ Exit.
 ## Step 2: Check for existing documents
 
 ```bash
-_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
+_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; _gsd_at() { for _p; do if [ -f "$_p" ]; then GSD_TOOLS="$_p"; return 0; fi; done; return 1; }; if _gsd_at "${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif unset -f gsd_run; _G="$(command -v gsd_run)"; then GSD_TOOLS="$_G"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif _gsd_at "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd_run is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; GSD_IDENTITY_STATUS=unverified; case "$(gsd_run runtime-identity --raw 2>/dev/null || true)" in '{"packageName":"@opengsd/gsd-core"'*'}') GSD_IDENTITY_STATUS=ok;; esac; export GSD_IDENTITY_STATUS; [ "$GSD_IDENTITY_STATUS" = ok ] || echo "WARNING: \"$GSD_TOOLS\" did not prove it is @opengsd/gsd-core - it is either a different package or an @opengsd/gsd-core older than the runtime-identity verb. See docs/how-to/diagnose-a-foreign-gsd-tools.md" >&2; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
 INIT=$(gsd_run query init.map-codebase 2>/dev/null || echo "{}")
 if [[ "$INIT" == @file:* ]]; then INIT=$(cat "${INIT#@file:}"); fi
 ```

package/gsd-core/workflows/secure-phase.md

@@ -16,8 +16,8 @@ Valid GSD subagent types (use exact names — do not fall back to 'general-purpo
 ## 0. Initialize
 
 ```bash
-_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
-RESPONSE_LANGUAGE=$(gsd_run query config-get response_language --default "" 2>/dev/null || echo "")
+_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; _gsd_at() { for _p; do if [ -f "$_p" ]; then GSD_TOOLS="$_p"; return 0; fi; done; return 1; }; if _gsd_at "${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif unset -f gsd_run; _G="$(command -v gsd_run)"; then GSD_TOOLS="$_G"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif _gsd_at "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd_run is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; GSD_IDENTITY_STATUS=unverified; case "$(gsd_run runtime-identity --raw 2>/dev/null || true)" in '{"packageName":"@opengsd/gsd-core"'*'}') GSD_IDENTITY_STATUS=ok;; esac; export GSD_IDENTITY_STATUS; [ "$GSD_IDENTITY_STATUS" = ok ] || echo "WARNING: \"$GSD_TOOLS\" did not prove it is @opengsd/gsd-core - it is either a different package or an @opengsd/gsd-core older than the runtime-identity verb. See docs/how-to/diagnose-a-foreign-gsd-tools.md" >&2; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
+RESPONSE_LANGUAGE=$(gsd_run query config-get response_language --raw --default "" 2>/dev/null || echo "")
 INIT=$(gsd_run query init.phase-op "${PHASE_ARG}")
 if [[ "$INIT" == @file:* ]]; then INIT=$(cat "${INIT#@file:}"); fi
 AGENT_SKILLS_AUDITOR=$(gsd_run query agent-skills gsd-security-auditor)

package/gsd-core/workflows/settings-advanced.md

@@ -22,7 +22,7 @@ Read all files referenced by the invoking prompt's execution_context before star
 Ensure config exists and resolve the workstream-aware config path (mirrors `settings.md`):
 
 ```bash
-_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
+_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; _gsd_at() { for _p; do if [ -f "$_p" ]; then GSD_TOOLS="$_p"; return 0; fi; done; return 1; }; if _gsd_at "${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" "${_GSD_RUNTIME_ROOT}/.codex/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif unset -f gsd_run; _G="$(command -v gsd_run)"; then GSD_TOOLS="$_G"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif _gsd_at "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/gsd-core/bin/${_GSD_SHIM_NAME}" "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; then gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd_run is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi; GSD_IDENTITY_STATUS=unverified; case "$(gsd_run runtime-identity --raw 2>/dev/null || true)" in '{"packageName":"@opengsd/gsd-core"'*'}') GSD_IDENTITY_STATUS=ok;; esac; export GSD_IDENTITY_STATUS; [ "$GSD_IDENTITY_STATUS" = ok ] || echo "WARNING: \"$GSD_TOOLS\" did not prove it is @opengsd/gsd-core - it is either a different package or an @opengsd/gsd-core older than the runtime-identity verb. See docs/how-to/diagnose-a-foreign-gsd-tools.md" >&2; if [ -n "${CLAUDE_ENV_FILE:-}" ] && [ -n "${GSD_TOOLS:-}" ]; then printf "export PATH='%s':\"\$PATH\"\n" "${GSD_TOOLS%/*}" >> "$CLAUDE_ENV_FILE" 2>/dev/null || true; fi
 gsd_run query config-ensure-section
 if [[ -z "${GSD_CONFIG_PATH:-}" ]]; then
   if [[ -f .planning/active-workstream ]]; then
@@ -51,7 +51,7 @@ Planning Tuning:
 - `workflow.plan_bounce_passes` (default: `2`)
 - `workflow.plan_bounce_script` (default: `null`)
 - `workflow.subagent_timeout` (default: `300000`)
-- `workflow.inline_plan_threshold` (default: `3`)
+- `workflow.inline_plan_threshold` (default: `2`)
 
 Execution Tuning:
 - `workflow.node_repair` (default: `true`)
@@ -434,7 +434,7 @@ AskUserQuestion([
 
 If "Other (Group B or custom)" is selected, prompt the user to enter the runtime name as a free-text string.
 If the selected runtime differs from the stored `runtime` key, update `runtime` via
-`gsd-tools.cjs query config-set runtime <value>` before proceeding to Step C.
+`gsd_run query config-set runtime <value>` before proceeding to Step C.
 
 **Step C — Configure tier overrides for the selected runtime:**
 
@@ -494,7 +494,7 @@ change.
 Merge the new settings into the existing config at `$GSD_CONFIG_PATH`. This merge is the
 core correctness invariant: **preserve every unrelated key** — do not clobber siblings.
 
-Apply each selected value via `gsd-tools.cjs query config-set <key> <value>` so the central
+Apply each selected value via `gsd_run query config-set <key> <value>` so the central
 validator (`isValidConfigKey`) accepts the write and the deep-merge preserves unrelated
 keys and sibling sub-objects.
 
@@ -567,7 +567,7 @@ anything not listed in Sections 1–8 MUST survive the update):
 ```
 
 Never emit a full overwrite of the file that omits keys the user did not touch. Always
-route each write through `gsd-tools.cjs query config-set` so sibling preservation is handled by
+route each write through `gsd_run query config-set` so sibling preservation is handled by
 the central setter.
 </step>
 
@@ -747,9 +747,7 @@ Never write a tier the user explicitly chose to keep; the existing value must su
 Display:
 
 ```text
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- GSD ► ADVANCED SETTINGS UPDATED
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+### GSD ► ADVANCED SETTINGS UPDATED
 
 | Setting                                    | Value |
 |--------------------------------------------|-------|
@@ -809,7 +807,7 @@ UI/AI phase gates), use /gsd:settings.
 - [ ] Numeric inputs validated — non-numeric rejected and re-prompted
 - [ ] Branch-template inputs validated — non-default must contain a placeholder
 - [ ] Null-allowed fields accept an empty input as a clear
-- [ ] Writes routed through `gsd-tools.cjs query config-set` so unrelated keys are preserved
+- [ ] Writes routed through `gsd_run query config-set` so unrelated keys are preserved
 - [ ] Section 7 shows current runtime and built-in tier table
 - [ ] Group B runtimes display "(no built-in default — your runtime handles model selection)"
 - [ ] Override set/clear/keep paths all work correctly for each tier