@openclaw/signal 2026.9.5 → 2026.9.6

package/node_modules/pako/lib/zlib/inftrees.js

@@ -0,0 +1,343 @@
+'use strict';
+
+// (C) 1995-2013 Jean-loup Gailly and Mark Adler
+// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
+//
+// This software is provided 'as-is', without any express or implied
+// warranty. In no event will the authors be held liable for any damages
+// arising from the use of this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. The origin of this software must not be misrepresented; you must not
+//   claim that you wrote the original software. If you use this software
+//   in a product, an acknowledgment in the product documentation would be
+//   appreciated but is not required.
+// 2. Altered source versions must be plainly marked as such, and must not be
+//   misrepresented as being the original software.
+// 3. This notice may not be removed or altered from any source distribution.
+
+var utils = require('../utils/common');
+
+var MAXBITS = 15;
+var ENOUGH_LENS = 852;
+var ENOUGH_DISTS = 592;
+//var ENOUGH = (ENOUGH_LENS+ENOUGH_DISTS);
+
+var CODES = 0;
+var LENS = 1;
+var DISTS = 2;
+
+var lbase = [ /* Length codes 257..285 base */
+  3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+  35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0
+];
+
+var lext = [ /* Length codes 257..285 extra */
+  16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+  19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78
+];
+
+var dbase = [ /* Distance codes 0..29 base */
+  1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+  257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+  8193, 12289, 16385, 24577, 0, 0
+];
+
+var dext = [ /* Distance codes 0..29 extra */
+  16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+  23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+  28, 28, 29, 29, 64, 64
+];
+
+module.exports = function inflate_table(type, lens, lens_index, codes, table, table_index, work, opts)
+{
+  var bits = opts.bits;
+      //here = opts.here; /* table entry for duplication */
+
+  var len = 0;               /* a code's length in bits */
+  var sym = 0;               /* index of code symbols */
+  var min = 0, max = 0;          /* minimum and maximum code lengths */
+  var root = 0;              /* number of index bits for root table */
+  var curr = 0;              /* number of index bits for current table */
+  var drop = 0;              /* code bits to drop for sub-table */
+  var left = 0;                   /* number of prefix codes available */
+  var used = 0;              /* code entries in table used */
+  var huff = 0;              /* Huffman code */
+  var incr;              /* for incrementing code, index */
+  var fill;              /* index for replicating entries */
+  var low;               /* low bits for current root entry */
+  var mask;              /* mask for low root bits */
+  var next;             /* next available space in table */
+  var base = null;     /* base value table to use */
+  var base_index = 0;
+//  var shoextra;    /* extra bits table to use */
+  var end;                    /* use base and extra for symbol > end */
+  var count = new utils.Buf16(MAXBITS + 1); //[MAXBITS+1];    /* number of codes of each length */
+  var offs = new utils.Buf16(MAXBITS + 1); //[MAXBITS+1];     /* offsets in table for each length */
+  var extra = null;
+  var extra_index = 0;
+
+  var here_bits, here_op, here_val;
+
+  /*
+   Process a set of code lengths to create a canonical Huffman code.  The
+   code lengths are lens[0..codes-1].  Each length corresponds to the
+   symbols 0..codes-1.  The Huffman code is generated by first sorting the
+   symbols by length from short to long, and retaining the symbol order
+   for codes with equal lengths.  Then the code starts with all zero bits
+   for the first code of the shortest length, and the codes are integer
+   increments for the same length, and zeros are appended as the length
+   increases.  For the deflate format, these bits are stored backwards
+   from their more natural integer increment ordering, and so when the
+   decoding tables are built in the large loop below, the integer codes
+   are incremented backwards.
+
+   This routine assumes, but does not check, that all of the entries in
+   lens[] are in the range 0..MAXBITS.  The caller must assure this.
+   1..MAXBITS is interpreted as that code length.  zero means that that
+   symbol does not occur in this code.
+
+   The codes are sorted by computing a count of codes for each length,
+   creating from that a table of starting indices for each length in the
+   sorted table, and then entering the symbols in order in the sorted
+   table.  The sorted table is work[], with that space being provided by
+   the caller.
+
+   The length counts are used for other purposes as well, i.e. finding
+   the minimum and maximum length codes, determining if there are any
+   codes at all, checking for a valid set of lengths, and looking ahead
+   at length counts to determine sub-table sizes when building the
+   decoding tables.
+   */
+
+  /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+  for (len = 0; len <= MAXBITS; len++) {
+    count[len] = 0;
+  }
+  for (sym = 0; sym < codes; sym++) {
+    count[lens[lens_index + sym]]++;
+  }
+
+  /* bound code lengths, force root to be within code lengths */
+  root = bits;
+  for (max = MAXBITS; max >= 1; max--) {
+    if (count[max] !== 0) { break; }
+  }
+  if (root > max) {
+    root = max;
+  }
+  if (max === 0) {                     /* no symbols to code at all */
+    //table.op[opts.table_index] = 64;  //here.op = (var char)64;    /* invalid code marker */
+    //table.bits[opts.table_index] = 1;   //here.bits = (var char)1;
+    //table.val[opts.table_index++] = 0;   //here.val = (var short)0;
+    table[table_index++] = (1 << 24) | (64 << 16) | 0;
+
+
+    //table.op[opts.table_index] = 64;
+    //table.bits[opts.table_index] = 1;
+    //table.val[opts.table_index++] = 0;
+    table[table_index++] = (1 << 24) | (64 << 16) | 0;
+
+    opts.bits = 1;
+    return 0;     /* no symbols, but wait for decoding to report error */
+  }
+  for (min = 1; min < max; min++) {
+    if (count[min] !== 0) { break; }
+  }
+  if (root < min) {
+    root = min;
+  }
+
+  /* check for an over-subscribed or incomplete set of lengths */
+  left = 1;
+  for (len = 1; len <= MAXBITS; len++) {
+    left <<= 1;
+    left -= count[len];
+    if (left < 0) {
+      return -1;
+    }        /* over-subscribed */
+  }
+  if (left > 0 && (type === CODES || max !== 1)) {
+    return -1;                      /* incomplete set */
+  }
+
+  /* generate offsets into symbol table for each length for sorting */
+  offs[1] = 0;
+  for (len = 1; len < MAXBITS; len++) {
+    offs[len + 1] = offs[len] + count[len];
+  }
+
+  /* sort symbols by length, by symbol order within each length */
+  for (sym = 0; sym < codes; sym++) {
+    if (lens[lens_index + sym] !== 0) {
+      work[offs[lens[lens_index + sym]]++] = sym;
+    }
+  }
+
+  /*
+   Create and fill in decoding tables.  In this loop, the table being
+   filled is at next and has curr index bits.  The code being used is huff
+   with length len.  That code is converted to an index by dropping drop
+   bits off of the bottom.  For codes where len is less than drop + curr,
+   those top drop + curr - len bits are incremented through all values to
+   fill the table with replicated entries.
+
+   root is the number of index bits for the root table.  When len exceeds
+   root, sub-tables are created pointed to by the root entry with an index
+   of the low root bits of huff.  This is saved in low to check for when a
+   new sub-table should be started.  drop is zero when the root table is
+   being filled, and drop is root when sub-tables are being filled.
+
+   When a new sub-table is needed, it is necessary to look ahead in the
+   code lengths to determine what size sub-table is needed.  The length
+   counts are used for this, and so count[] is decremented as codes are
+   entered in the tables.
+
+   used keeps track of how many table entries have been allocated from the
+   provided *table space.  It is checked for LENS and DIST tables against
+   the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+   the initial root table size constants.  See the comments in inftrees.h
+   for more information.
+
+   sym increments through all symbols, and the loop terminates when
+   all codes of length max, i.e. all codes, have been processed.  This
+   routine permits incomplete codes, so another loop after this one fills
+   in the rest of the decoding tables with invalid code markers.
+   */
+
+  /* set up for code type */
+  // poor man optimization - use if-else instead of switch,
+  // to avoid deopts in old v8
+  if (type === CODES) {
+    base = extra = work;    /* dummy value--not used */
+    end = 19;
+
+  } else if (type === LENS) {
+    base = lbase;
+    base_index -= 257;
+    extra = lext;
+    extra_index -= 257;
+    end = 256;
+
+  } else {                    /* DISTS */
+    base = dbase;
+    extra = dext;
+    end = -1;
+  }
+
+  /* initialize opts for loop */
+  huff = 0;                   /* starting code */
+  sym = 0;                    /* starting code symbol */
+  len = min;                  /* starting code length */
+  next = table_index;              /* current table to fill in */
+  curr = root;                /* current table index bits */
+  drop = 0;                   /* current bits to drop from code for index */
+  low = -1;                   /* trigger new sub-table when len > root */
+  used = 1 << root;          /* use root table entries */
+  mask = used - 1;            /* mask for comparing low */
+
+  /* check available table space */
+  if ((type === LENS && used > ENOUGH_LENS) ||
+    (type === DISTS && used > ENOUGH_DISTS)) {
+    return 1;
+  }
+
+  /* process all codes and make table entries */
+  for (;;) {
+    /* create table entry */
+    here_bits = len - drop;
+    if (work[sym] < end) {
+      here_op = 0;
+      here_val = work[sym];
+    }
+    else if (work[sym] > end) {
+      here_op = extra[extra_index + work[sym]];
+      here_val = base[base_index + work[sym]];
+    }
+    else {
+      here_op = 32 + 64;         /* end of block */
+      here_val = 0;
+    }
+
+    /* replicate for those indices with low len bits equal to huff */
+    incr = 1 << (len - drop);
+    fill = 1 << curr;
+    min = fill;                 /* save offset to next table */
+    do {
+      fill -= incr;
+      table[next + (huff >> drop) + fill] = (here_bits << 24) | (here_op << 16) | here_val |0;
+    } while (fill !== 0);
+
+    /* backwards increment the len-bit code huff */
+    incr = 1 << (len - 1);
+    while (huff & incr) {
+      incr >>= 1;
+    }
+    if (incr !== 0) {
+      huff &= incr - 1;
+      huff += incr;
+    } else {
+      huff = 0;
+    }
+
+    /* go to next symbol, update count, len */
+    sym++;
+    if (--count[len] === 0) {
+      if (len === max) { break; }
+      len = lens[lens_index + work[sym]];
+    }
+
+    /* create new sub-table if needed */
+    if (len > root && (huff & mask) !== low) {
+      /* if first time, transition to sub-tables */
+      if (drop === 0) {
+        drop = root;
+      }
+
+      /* increment past last table */
+      next += min;            /* here min is 1 << curr */
+
+      /* determine length of next table */
+      curr = len - drop;
+      left = 1 << curr;
+      while (curr + drop < max) {
+        left -= count[curr + drop];
+        if (left <= 0) { break; }
+        curr++;
+        left <<= 1;
+      }
+
+      /* check for enough space */
+      used += 1 << curr;
+      if ((type === LENS && used > ENOUGH_LENS) ||
+        (type === DISTS && used > ENOUGH_DISTS)) {
+        return 1;
+      }
+
+      /* point entry in root table to sub-table */
+      low = huff & mask;
+      /*table.op[low] = curr;
+      table.bits[low] = root;
+      table.val[low] = next - opts.table_index;*/
+      table[low] = (root << 24) | (curr << 16) | (next - table_index) |0;
+    }
+  }
+
+  /* fill in remaining table entry if code is incomplete (guaranteed to have
+   at most one remaining entry, since if the code is incomplete, the
+   maximum code length that was allowed to get this far is one bit) */
+  if (huff !== 0) {
+    //table.op[next + huff] = 64;            /* invalid code marker */
+    //table.bits[next + huff] = len - drop;
+    //table.val[next + huff] = 0;
+    table[next + huff] = ((len - drop) << 24) | (64 << 16) |0;
+  }
+
+  /* set return parameters */
+  //opts.table_index += used;
+  opts.bits = root;
+  return 0;
+};

package/node_modules/pako/lib/zlib/messages.js

@@ -0,0 +1,32 @@
+'use strict';
+
+// (C) 1995-2013 Jean-loup Gailly and Mark Adler
+// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
+//
+// This software is provided 'as-is', without any express or implied
+// warranty. In no event will the authors be held liable for any damages
+// arising from the use of this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. The origin of this software must not be misrepresented; you must not
+//   claim that you wrote the original software. If you use this software
+//   in a product, an acknowledgment in the product documentation would be
+//   appreciated but is not required.
+// 2. Altered source versions must be plainly marked as such, and must not be
+//   misrepresented as being the original software.
+// 3. This notice may not be removed or altered from any source distribution.
+
+module.exports = {
+  2:      'need dictionary',     /* Z_NEED_DICT       2  */
+  1:      'stream end',          /* Z_STREAM_END      1  */
+  0:      '',                    /* Z_OK              0  */
+  '-1':   'file error',          /* Z_ERRNO         (-1) */
+  '-2':   'stream error',        /* Z_STREAM_ERROR  (-2) */
+  '-3':   'data error',          /* Z_DATA_ERROR    (-3) */
+  '-4':   'insufficient memory', /* Z_MEM_ERROR     (-4) */
+  '-5':   'buffer error',        /* Z_BUF_ERROR     (-5) */
+  '-6':   'incompatible version' /* Z_VERSION_ERROR (-6) */
+};