@openclaw/signal 2026.9.5 → 2026.9.6

package/node_modules/pako/lib/zlib/README

@@ -0,0 +1,59 @@
+Content of this folder follows zlib C sources as close as possible.
+That's intended to simplify maintainability and guarantee equal API
+and result.
+
+Key differences:
+
+- Everything is in JavaScript.
+- No platform-dependent blocks.
+- Some things like crc32 rewritten to keep size small and make JIT
+  work better.
+- Some code is different due missed features in JS (macros, pointers,
+  structures, header files)
+- Specific API methods are not implemented (see notes in root readme)
+
+This port is based on zlib 1.2.8.
+
+This port is under zlib license (see below) with contribution and addition of javascript
+port under expat license (see LICENSE at root of project)
+
+Copyright:
+(C) 1995-2013 Jean-loup Gailly and Mark Adler
+(C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
+
+
+From zlib's README
+=============================================================================
+
+Acknowledgments:
+
+  The deflate format used by zlib was defined by Phil Katz.  The deflate and
+  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
+  people who reported problems and suggested various improvements in zlib; they
+  are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2013 Jean-loup Gailly and Mark Adler
+
+Copyright (c) <''year''> <''copyright holders''>
+
+This software is provided 'as-is', without any express or implied
+warranty. In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must not
+   claim that you wrote the original software. If you use this software
+   in a product, an acknowledgment in the product documentation would be
+   appreciated but is not required.
+2. Altered source versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
+
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu

package/node_modules/pako/lib/zlib/adler32.js

@@ -0,0 +1,51 @@
+'use strict';
+
+// Note: adler32 takes 12% for level 0 and 2% for level 6.
+// It isn't worth it to make additional optimizations as in original.
+// Small size is preferable.
+
+// (C) 1995-2013 Jean-loup Gailly and Mark Adler
+// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
+//
+// This software is provided 'as-is', without any express or implied
+// warranty. In no event will the authors be held liable for any damages
+// arising from the use of this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. The origin of this software must not be misrepresented; you must not
+//   claim that you wrote the original software. If you use this software
+//   in a product, an acknowledgment in the product documentation would be
+//   appreciated but is not required.
+// 2. Altered source versions must be plainly marked as such, and must not be
+//   misrepresented as being the original software.
+// 3. This notice may not be removed or altered from any source distribution.
+
+function adler32(adler, buf, len, pos) {
+  var s1 = (adler & 0xffff) |0,
+      s2 = ((adler >>> 16) & 0xffff) |0,
+      n = 0;
+
+  while (len !== 0) {
+    // Set limit ~ twice less than 5552, to keep
+    // s2 in 31-bits, because we force signed ints.
+    // in other case %= will fail.
+    n = len > 2000 ? 2000 : len;
+    len -= n;
+
+    do {
+      s1 = (s1 + buf[pos++]) |0;
+      s2 = (s2 + s1) |0;
+    } while (--n);
+
+    s1 %= 65521;
+    s2 %= 65521;
+  }
+
+  return (s1 | (s2 << 16)) |0;
+}
+
+
+module.exports = adler32;

package/node_modules/pako/lib/zlib/constants.js

@@ -0,0 +1,68 @@
+'use strict';
+
+// (C) 1995-2013 Jean-loup Gailly and Mark Adler
+// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
+//
+// This software is provided 'as-is', without any express or implied
+// warranty. In no event will the authors be held liable for any damages
+// arising from the use of this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. The origin of this software must not be misrepresented; you must not
+//   claim that you wrote the original software. If you use this software
+//   in a product, an acknowledgment in the product documentation would be
+//   appreciated but is not required.
+// 2. Altered source versions must be plainly marked as such, and must not be
+//   misrepresented as being the original software.
+// 3. This notice may not be removed or altered from any source distribution.
+
+module.exports = {
+
+  /* Allowed flush values; see deflate() and inflate() below for details */
+  Z_NO_FLUSH:         0,
+  Z_PARTIAL_FLUSH:    1,
+  Z_SYNC_FLUSH:       2,
+  Z_FULL_FLUSH:       3,
+  Z_FINISH:           4,
+  Z_BLOCK:            5,
+  Z_TREES:            6,
+
+  /* Return codes for the compression/decompression functions. Negative values
+  * are errors, positive values are used for special but normal events.
+  */
+  Z_OK:               0,
+  Z_STREAM_END:       1,
+  Z_NEED_DICT:        2,
+  Z_ERRNO:           -1,
+  Z_STREAM_ERROR:    -2,
+  Z_DATA_ERROR:      -3,
+  //Z_MEM_ERROR:     -4,
+  Z_BUF_ERROR:       -5,
+  //Z_VERSION_ERROR: -6,
+
+  /* compression levels */
+  Z_NO_COMPRESSION:         0,
+  Z_BEST_SPEED:             1,
+  Z_BEST_COMPRESSION:       9,
+  Z_DEFAULT_COMPRESSION:   -1,
+
+
+  Z_FILTERED:               1,
+  Z_HUFFMAN_ONLY:           2,
+  Z_RLE:                    3,
+  Z_FIXED:                  4,
+  Z_DEFAULT_STRATEGY:       0,
+
+  /* Possible values of the data_type field (though see inflate()) */
+  Z_BINARY:                 0,
+  Z_TEXT:                   1,
+  //Z_ASCII:                1, // = Z_TEXT (deprecated)
+  Z_UNKNOWN:                2,
+
+  /* The deflate compression method */
+  Z_DEFLATED:               8
+  //Z_NULL:                 null // Use -1 or null inline, depending on var type
+};

package/node_modules/pako/lib/zlib/crc32.js

@@ -0,0 +1,59 @@
+'use strict';
+
+// Note: we can't get significant speed boost here.
+// So write code to minimize size - no pregenerated tables
+// and array tools dependencies.
+
+// (C) 1995-2013 Jean-loup Gailly and Mark Adler
+// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
+//
+// This software is provided 'as-is', without any express or implied
+// warranty. In no event will the authors be held liable for any damages
+// arising from the use of this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. The origin of this software must not be misrepresented; you must not
+//   claim that you wrote the original software. If you use this software
+//   in a product, an acknowledgment in the product documentation would be
+//   appreciated but is not required.
+// 2. Altered source versions must be plainly marked as such, and must not be
+//   misrepresented as being the original software.
+// 3. This notice may not be removed or altered from any source distribution.
+
+// Use ordinary array, since untyped makes no boost here
+function makeTable() {
+  var c, table = [];
+
+  for (var n = 0; n < 256; n++) {
+    c = n;
+    for (var k = 0; k < 8; k++) {
+      c = ((c & 1) ? (0xEDB88320 ^ (c >>> 1)) : (c >>> 1));
+    }
+    table[n] = c;
+  }
+
+  return table;
+}
+
+// Create table on load. Just 255 signed longs. Not a problem.
+var crcTable = makeTable();
+
+
+function crc32(crc, buf, len, pos) {
+  var t = crcTable,
+      end = pos + len;
+
+  crc ^= -1;
+
+  for (var i = pos; i < end; i++) {
+    crc = (crc >>> 8) ^ t[(crc ^ buf[i]) & 0xFF];
+  }
+
+  return (crc ^ (-1)); // >>> 0;
+}
+
+
+module.exports = crc32;