@oneuptime/common 14.0.7 → 14.0.9

package/Tests/App/Dashboard/FlowTopTalkersZoomRefetch.test.tsx

@@ -0,0 +1,722 @@
+/** @timezone UTC */
+
+import "@testing-library/jest-dom";
+import {
+  afterEach,
+  beforeEach,
+  describe,
+  expect,
+  jest,
+  test,
+} from "@jest/globals";
+import {
+  act,
+  cleanup,
+  fireEvent,
+  render,
+  screen,
+  waitFor,
+} from "@testing-library/react";
+import * as React from "react";
+import getJestMockFunction, { MockFunction } from "../../MockType";
+
+/*
+ * Issue #4105 review on the network device Traffic card (FlowTopTalkers),
+ * whose bandwidth chart zooms the card's range: a drag and a double-click are
+ * now everyday gestures on it, and each one refetches the whole card.
+ *
+ *   - sdn-2: every refetch used to swap the card's body - three tiles, the
+ *     chart and four top-N tables, about a page - for a small loader, so the
+ *     page collapsed under the pointer that had just dragged or double-clicked
+ *     and was thrown back when the data landed. The last data now stays on
+ *     screen, dimmed and marked "Refreshing", as the Database overview and
+ *     MetricView keep theirs; only the very first load shows the loader.
+ *   - sdn-6: a zoom into a quiet stretch showed "No flow data yet" and the
+ *     NetFlow setup steps, as if export were not configured on a device the
+ *     reader had just seen exporting. It now says there were no flows in the
+ *     selected time range and how to get back; the setup steps stay for an
+ *     unzoomed preset window.
+ *   - sdn-1, end to end: a two-week response through the whole card draws
+ *     every bucket and peaks at the Max it prints (the real DataPointUtil over
+ *     the chart's props).
+ *
+ * The network (the top-talkers POST) and the card's range picker (a stand-in
+ * that can pick a preset or a custom range) are replaced; the area chart is
+ * ChartZoomStandIn, which resolves its zoom exactly as the real wrapper does.
+ */
+
+const DEVICE_ID: string = "11111111-1111-4111-8111-111111111111";
+const NOW: Date = new Date("2026-09-28T12:00:00.000Z");
+const MINUTE: number = 60 * 1000;
+const ZOOM_START: Date = new Date("2026-09-28T11:20:00.000Z");
+const ZOOM_END: Date = new Date("2026-09-28T11:40:00.000Z");
+const CUSTOM_START: Date = new Date("2026-09-28T09:00:00.000Z");
+const CUSTOM_END: Date = new Date("2026-09-28T10:00:00.000Z");
+const BANDWIDTH_CHART: string = "Bandwidth [Mbps]";
+// The Flows tile over two weeks: a flow a minute, as the tile formats it.
+const TWO_WEEKS_OF_FLOWS: string = (14 * 24 * 60).toLocaleString();
+
+const apiPostMock: MockFunction = getJestMockFunction();
+
+jest.mock("../../../UI/Components/Charts/Area/AreaChart", () => {
+  return {
+    ...(jest.requireActual(
+      "../../../UI/Components/Charts/Area/AreaChart",
+    ) as Record<string, unknown>),
+    __esModule: true,
+    default: (jest.requireActual("./ChartZoomStandIn") as { default: unknown })
+      .default,
+  };
+});
+
+// The card's picker: shows its range, and picks a preset or a custom range.
+jest.mock("../../../UI/Components/Date/RangeStartAndEndDateView", () => {
+  return {
+    __esModule: true,
+    default: (props: {
+      dashboardStartAndEndDate: { range: string };
+      onChange: (value: unknown) => void;
+    }): React.ReactElement => {
+      const { default: InBetweenType } = jest.requireActual(
+        "../../../Types/BaseDatabase/InBetween",
+      ) as { default: new (start: Date, end: Date) => unknown };
+      return (
+        <div>
+          <span data-testid="card-picker">
+            {props.dashboardStartAndEndDate.range}
+          </span>
+          <button
+            type="button"
+            onClick={() => {
+              props.onChange({ range: "Past 2 Weeks" });
+            }}
+          >
+            Pick Past 2 Weeks
+          </button>
+          <button
+            type="button"
+            onClick={() => {
+              props.onChange({
+                range: "Custom",
+                startAndEndDate: new InBetweenType(
+                  new Date("2026-09-28T09:00:00.000Z"),
+                  new Date("2026-09-28T10:00:00.000Z"),
+                ),
+              });
+            }}
+          >
+            Pick 09:00 to 10:00
+          </button>
+        </div>
+      );
+    },
+  };
+});
+
+jest.mock("../../../UI/Utils/Project", () => {
+  return {
+    __esModule: true,
+    default: {
+      getCurrentProjectId: (): unknown => {
+        const { default: ObjectIDType } = jest.requireActual(
+          "../../../Types/ObjectID",
+        ) as { default: new (id: string) => unknown };
+        return new ObjectIDType("10000000-0000-4000-8000-000000000001");
+      },
+    },
+  };
+});
+
+jest.mock("../../../UI/Utils/API/API", () => {
+  return {
+    __esModule: true,
+    default: {
+      post: (...args: Array<unknown>): unknown => {
+        return apiPostMock(...args);
+      },
+      getFriendlyMessage: (error: Error): string => {
+        return error.message;
+      },
+    },
+  };
+});
+
+import FlowTopTalkers from "../../../../App/FeatureSet/Dashboard/src/Components/NetworkDevice/FlowTopTalkers";
+import {
+  getStandInChart,
+  resetStandInCharts,
+  standInDrag,
+} from "./ChartZoomStandIn";
+import { RESET_TIME_RANGE_ZOOM_BUTTON_TEST_ID } from "../../../UI/Components/Charts/TimeRangeZoom/ResetTimeRangeZoomButton";
+import ChartDataPoint from "../../../UI/Components/Charts/ChartLibrary/Types/ChartDataPoint";
+import SeriesPoints from "../../../UI/Components/Charts/Types/SeriesPoints";
+import { XAxis } from "../../../UI/Components/Charts/Types/XAxis/XAxis";
+import YAxis from "../../../UI/Components/Charts/Types/YAxis/YAxis";
+import DataPointUtil from "../../../UI/Components/Charts/Utils/DataPoint";
+import ObjectID from "../../../Types/ObjectID";
+import TimeRange from "../../../Types/Time/TimeRange";
+
+interface FlowRequest {
+  startTime: string;
+  endTime: string;
+}
+
+type FlowResponse = { data: Record<string, unknown> };
+
+function requestOf(call: Array<unknown>): FlowRequest {
+  return (call[0] as { data: FlowRequest }).data;
+}
+
+function lastFlowRequest(): FlowRequest {
+  const calls: Array<Array<unknown>> = apiPostMock.mock.calls;
+  const last: Array<unknown> | undefined = calls[calls.length - 1];
+  if (!last) {
+    throw new Error("The top talkers were never fetched");
+  }
+  return requestOf(last);
+}
+
+function requestMinutes(request: FlowRequest): number {
+  return (Date.parse(request.endTime) - Date.parse(request.startTime)) / MINUTE;
+}
+
+// The API's bucket width for a window (pickBucketSeconds).
+function apiBucketSeconds(request: FlowRequest): number {
+  const windowSeconds: number = Math.floor(
+    (Date.parse(request.endTime) - Date.parse(request.startTime)) / 1000,
+  );
+  return Math.max(60, Math.ceil(Math.ceil(windowSeconds / 120) / 60) * 60);
+}
+
+/*
+ * What the endpoint answers for a window: figures that depend on its length
+ * (so a card that did not follow the range shows the wrong number), a bucket
+ * at 1 Mbps for every bucket of the window but one at `burstMbps`, and the
+ * window echoed back.
+ */
+function flowResponse(
+  request: FlowRequest,
+  burstMbps: number = 1,
+): FlowResponse {
+  const minutes: number = requestMinutes(request);
+  const bucketSeconds: number = apiBucketSeconds(request);
+  const bucketMs: number = bucketSeconds * 1000;
+  const firstMs: number =
+    Math.floor(Date.parse(request.startTime) / bucketMs) * bucketMs;
+  const count: number = Math.ceil(
+    (Date.parse(request.endTime) - firstMs) / bucketMs,
+  );
+  const series: Array<Record<string, unknown>> = [];
+  for (let index: number = 0; index < count; index++) {
+    const mbps: number = index === Math.floor(count / 2) ? burstMbps : 1;
+    series.push({
+      time: new Date(firstMs + index * bucketMs).toISOString(),
+      octets: (mbps * 1_000_000 * bucketSeconds) / 8,
+      packets: 1,
+    });
+  }
+  return {
+    data: {
+      totalOctets: minutes * 1000,
+      totalPackets: minutes * 10,
+      totalFlows: minutes,
+      topSources: [{ key: `10.0.0.${minutes}`, octets: 3000, packets: 20 }],
+      topDestinations: [{ key: "10.0.0.9", octets: 2000, packets: 10 }],
+      topProtocolPorts: [
+        { protocolNumber: 6, destinationPort: 443, octets: 5000, packets: 30 },
+      ],
+      topConversations: [],
+      series: series,
+      seriesBucketSeconds: bucketSeconds,
+      windowStartAt: request.startTime,
+      windowEndAt: request.endTime,
+    },
+  };
+}
+
+function quietResponse(request: FlowRequest): FlowResponse {
+  return {
+    data: {
+      totalOctets: 0,
+      totalPackets: 0,
+      totalFlows: 0,
+      series: [],
+      seriesBucketSeconds: apiBucketSeconds(request),
+      windowStartAt: request.startTime,
+      windowEndAt: request.endTime,
+    },
+  };
+}
+
+// Answers every window from now on with `answer`.
+function answerWith(answer: (request: FlowRequest) => FlowResponse): void {
+  apiPostMock.mockImplementation(async (args: unknown) => {
+    return answer((args as { data: FlowRequest }).data);
+  });
+}
+
+// Holds the NEXT fetch until the test lets it land.
+interface HeldFetch {
+  land: (response: FlowResponse) => Promise<void>;
+  fail: (error: Error) => Promise<void>;
+}
+
+function holdNextFetch(): HeldFetch {
+  let resolveFetch: (value: unknown) => void = (): void => {};
+  let rejectFetch: (error: Error) => void = (): void => {};
+  apiPostMock.mockImplementationOnce(() => {
+    return new Promise(
+      (resolve: (value: unknown) => void, reject: (error: Error) => void) => {
+        resolveFetch = resolve;
+        rejectFetch = reject;
+      },
+    );
+  });
+  return {
+    land: async (response: FlowResponse): Promise<void> => {
+      await act(async () => {
+        resolveFetch(response);
+      });
+      await flush();
+    },
+    fail: async (error: Error): Promise<void> => {
+      await act(async () => {
+        rejectFetch(error);
+      });
+      await flush();
+    },
+  };
+}
+
+async function flush(): Promise<void> {
+  for (let i: number = 0; i < 8; i++) {
+    await act(async () => {
+      await Promise.resolve();
+    });
+  }
+}
+
+function chart(): HTMLElement {
+  return screen.getByTestId(`chart ${BANDWIDTH_CHART}`);
+}
+
+async function renderCard(): Promise<void> {
+  render(<FlowTopTalkers networkDeviceId={new ObjectID(DEVICE_ID)} />);
+  await flush();
+  await waitFor(() => {
+    expect(chart()).toBeInTheDocument();
+  });
+}
+
+async function dragAcrossBandwidth(
+  start: Date = ZOOM_START,
+  end: Date = ZOOM_END,
+): Promise<void> {
+  standInDrag.start = start;
+  standInDrag.end = end;
+  fireEvent.click(
+    screen.getByRole("button", { name: `Drag across ${BANDWIDTH_CHART}` }),
+  );
+  await flush();
+}
+
+function tileValue(title: string): string {
+  const tile: HTMLElement | null = screen
+    .getByRole("button", { name: `About ${title}` })
+    .closest("div.rounded-md");
+  return (
+    (tile?.querySelector("div.text-2xl") as HTMLElement | null)?.textContent ||
+    ""
+  );
+}
+
+function pickerLabel(): string {
+  return screen.getByTestId("card-picker").textContent || "";
+}
+
+function body(): HTMLElement {
+  return screen.getByTestId("flow-top-talkers-body");
+}
+
+// Everything that says the card is refetching over the data it shows.
+function expectRefreshingOverLastData(): void {
+  expect(screen.queryByTestId("component-loader")).not.toBeInTheDocument();
+  expect(screen.getByTestId("flow-refreshing")).toHaveTextContent("Refreshing");
+  expect(body()).toHaveClass("opacity-75");
+  expect(body().parentElement).toHaveAttribute("aria-busy", "true");
+}
+
+function expectSettled(): void {
+  expect(screen.queryByTestId("component-loader")).not.toBeInTheDocument();
+  expect(screen.queryByTestId("flow-refreshing")).not.toBeInTheDocument();
+  expect(body()).not.toHaveClass("opacity-75");
+  expect(body().parentElement).toHaveAttribute("aria-busy", "false");
+}
+
+beforeEach(() => {
+  jest.useFakeTimers({ doNotFake: ["nextTick", "setImmediate"] });
+  jest.setSystemTime(NOW);
+  apiPostMock.mockReset();
+  resetStandInCharts();
+  answerWith((request: FlowRequest) => {
+    return flowResponse(request);
+  });
+});
+
+afterEach(() => {
+  cleanup();
+  jest.useRealTimers();
+});
+
+describe("Traffic card: a zoom or a reset refetches over the data on screen (sdn-2)", () => {
+  test("the first load shows the loader, and nothing else", async () => {
+    const first: HeldFetch = holdNextFetch();
+    render(<FlowTopTalkers networkDeviceId={new ObjectID(DEVICE_ID)} />);
+    await flush();
+
+    expect(screen.getByTestId("component-loader")).toBeInTheDocument();
+    expect(
+      screen.queryByTestId("flow-top-talkers-body"),
+    ).not.toBeInTheDocument();
+    expect(screen.queryByTestId("flow-refreshing")).not.toBeInTheDocument();
+
+    await first.land(flowResponse(lastFlowRequest()));
+
+    expect(tileValue("Flows")).toBe("60");
+    expectSettled();
+  });
+
+  test("a drag keeps the tiles, the chart and the tables on screen while the zoom's fetch runs", async () => {
+    await renderCard();
+    const chartBeforeZoom: HTMLElement = chart();
+    const zoomFetch: HeldFetch = holdNextFetch();
+
+    await dragAcrossBandwidth();
+
+    // The picker already reads the zoom; the body still shows the past hour.
+    expect(pickerLabel()).toBe(TimeRange.CUSTOM);
+    expect(tileValue("Flows")).toBe("60");
+    expect(screen.getByText("10.0.0.60")).toBeInTheDocument();
+    expect(screen.getByText("Top Protocols & Ports")).toBeInTheDocument();
+    // The very chart that was dragged: still mounted, not re-created.
+    expect(chart()).toBe(chartBeforeZoom);
+    expectRefreshingOverLastData();
+
+    await zoomFetch.land(
+      flowResponse({
+        startTime: ZOOM_START.toISOString(),
+        endTime: ZOOM_END.toISOString(),
+      }),
+    );
+
+    expect(tileValue("Flows")).toBe("20");
+    expect(screen.getByText("10.0.0.20")).toBeInTheDocument();
+    expect(screen.queryByText("10.0.0.60")).not.toBeInTheDocument();
+    expect(chart()).toBe(chartBeforeZoom);
+    expectSettled();
+  });
+
+  test("a double-click on the chart keeps the zoomed figures on screen while the reset's fetch runs", async () => {
+    await renderCard();
+    await dragAcrossBandwidth();
+    await waitFor(() => {
+      expect(tileValue("Flows")).toBe("20");
+    });
+    const chartBeforeReset: HTMLElement = chart();
+    const resetFetch: HeldFetch = holdNextFetch();
+
+    fireEvent.doubleClick(chart());
+    await flush();
+
+    expect(pickerLabel()).toBe(TimeRange.PAST_ONE_HOUR);
+    expect(tileValue("Flows")).toBe("20");
+    expect(chart()).toBe(chartBeforeReset);
+    expectRefreshingOverLastData();
+
+    await resetFetch.land(flowResponse(lastFlowRequest()));
+
+    expect(requestMinutes(lastFlowRequest())).toBe(60);
+    expect(tileValue("Flows")).toBe("60");
+    expect(chart()).toBe(chartBeforeReset);
+    expectSettled();
+  });
+
+  test("Reset zoom beside the picker does the same", async () => {
+    await renderCard();
+    await dragAcrossBandwidth();
+    await waitFor(() => {
+      expect(tileValue("Flows")).toBe("20");
+    });
+    const resetFetch: HeldFetch = holdNextFetch();
+
+    fireEvent.click(screen.getByTestId(RESET_TIME_RANGE_ZOOM_BUTTON_TEST_ID));
+    await flush();
+
+    expect(tileValue("Flows")).toBe("20");
+    expectRefreshingOverLastData();
+
+    await resetFetch.land(flowResponse(lastFlowRequest()));
+
+    expect(tileValue("Flows")).toBe("60");
+    expectSettled();
+  });
+
+  test("a new pick on the picker refetches over the data on screen too", async () => {
+    await renderCard();
+    const pickFetch: HeldFetch = holdNextFetch();
+
+    fireEvent.click(screen.getByRole("button", { name: "Pick Past 2 Weeks" }));
+    await flush();
+
+    expect(tileValue("Flows")).toBe("60");
+    expectRefreshingOverLastData();
+
+    await pickFetch.land(flowResponse(lastFlowRequest()));
+
+    expect(tileValue("Flows")).toBe(TWO_WEEKS_OF_FLOWS);
+    expectSettled();
+  });
+
+  test("a failed refetch keeps the last data, under an inline note that it could not refresh", async () => {
+    await renderCard();
+    const zoomFetch: HeldFetch = holdNextFetch();
+
+    await dragAcrossBandwidth();
+    await zoomFetch.fail(new Error("The probe did not answer"));
+
+    const note: HTMLElement = screen.getByRole("alert");
+    expect(note).toHaveTextContent(
+      "Couldn't refresh — showing previously loaded data. The probe did not answer",
+    );
+    expect(tileValue("Flows")).toBe("60");
+    expect(chart()).toBeInTheDocument();
+    expectSettled();
+
+    // The next fetch that lands clears the note.
+    fireEvent.click(screen.getByRole("button", { name: "Pick Past 2 Weeks" }));
+    await flush();
+    await waitFor(() => {
+      expect(tileValue("Flows")).toBe(TWO_WEEKS_OF_FLOWS);
+    });
+    expect(screen.queryByRole("alert")).not.toBeInTheDocument();
+  });
+
+  test("a failed first load still shows the full error, with nothing stale to keep", async () => {
+    apiPostMock.mockImplementation(async () => {
+      throw new Error("The probe did not answer");
+    });
+    render(<FlowTopTalkers networkDeviceId={new ObjectID(DEVICE_ID)} />);
+    await flush();
+
+    expect(screen.getByText("The probe did not answer")).toBeInTheDocument();
+    expect(screen.queryByRole("alert")).not.toBeInTheDocument();
+    expect(
+      screen.queryByTestId("flow-top-talkers-body"),
+    ).not.toBeInTheDocument();
+    expect(screen.queryByTestId("component-loader")).not.toBeInTheDocument();
+  });
+
+  test("a zoom, then a reset before the zoom's data lands: the slower, older answer never lands", async () => {
+    await renderCard();
+    const zoomFetch: HeldFetch = holdNextFetch();
+
+    await dragAcrossBandwidth();
+    fireEvent.click(screen.getByTestId(RESET_TIME_RANGE_ZOOM_BUTTON_TEST_ID));
+    await flush();
+    await waitFor(() => {
+      expect(screen.queryByTestId("flow-refreshing")).not.toBeInTheDocument();
+    });
+
+    await zoomFetch.land(
+      flowResponse({
+        startTime: ZOOM_START.toISOString(),
+        endTime: ZOOM_END.toISOString(),
+      }),
+    );
+
+    expect(tileValue("Flows")).toBe("60");
+    expect(pickerLabel()).toBe(TimeRange.PAST_ONE_HOUR);
+    expectSettled();
+  });
+});
+
+describe("Traffic card: an empty window after a zoom is not an onboarding screen (sdn-6)", () => {
+  test("a zoom into a quiet stretch says there were no flows there, and how to get back", async () => {
+    await renderCard();
+    answerWith((request: FlowRequest) => {
+      return requestMinutes(request) < 60
+        ? quietResponse(request)
+        : flowResponse(request);
+    });
+
+    await dragAcrossBandwidth();
+
+    const empty: HTMLElement = await screen.findByTestId("flow-no-data");
+    expect(empty).toHaveTextContent("No flows in the selected time range.");
+    expect(empty).toHaveTextContent(
+      "This device sent no flow records in the stretch you zoomed into. Double-click here, or use Reset zoom, to go back to the past 1 hour.",
+    );
+    expect(empty).not.toHaveTextContent("No flow data yet.");
+    expect(empty).not.toHaveTextContent("PROBE_NETFLOW_RECEIVER_ENABLED");
+    // It takes the double-click, so a double-click must not select a word.
+    expect(empty).toHaveClass("select-none");
+
+    fireEvent.doubleClick(empty);
+    await flush();
+
+    await waitFor(() => {
+      expect(chart()).toBeInTheDocument();
+    });
+    expect(requestMinutes(lastFlowRequest())).toBe(60);
+    expect(pickerLabel()).toBe(TimeRange.PAST_ONE_HOUR);
+  });
+
+  test("the unzoomed past hour with no flows keeps the NetFlow setup steps, and its text stays selectable", async () => {
+    answerWith(quietResponse);
+    render(<FlowTopTalkers networkDeviceId={new ObjectID(DEVICE_ID)} />);
+    await flush();
+
+    const empty: HTMLElement = await screen.findByTestId("flow-no-data");
+    expect(empty).toHaveTextContent("No flow data yet.");
+    expect(empty).toHaveTextContent(
+      "Flow export is not configured for this device, or nothing has arrived in the past 1 hour.",
+    );
+    expect(empty).toHaveTextContent("PROBE_NETFLOW_RECEIVER_ENABLED=true");
+    expect(empty).not.toHaveTextContent("Double-click");
+    expect(empty).not.toHaveClass("select-none");
+  });
+
+  test("another preset with no flows keeps the setup steps too, for that window", async () => {
+    await renderCard();
+    answerWith(quietResponse);
+
+    fireEvent.click(screen.getByRole("button", { name: "Pick Past 2 Weeks" }));
+    await flush();
+
+    const empty: HTMLElement = await screen.findByTestId("flow-no-data");
+    expect(empty).toHaveTextContent("No flow data yet.");
+    expect(empty).toHaveTextContent("nothing has arrived in the past 2 weeks");
+  });
+
+  test("a custom range picked on the card, with no flows: no setup steps, and no zoom to undo", async () => {
+    await renderCard();
+    answerWith(quietResponse);
+
+    fireEvent.click(
+      screen.getByRole("button", { name: "Pick 09:00 to 10:00" }),
+    );
+    await flush();
+
+    const empty: HTMLElement = await screen.findByTestId("flow-no-data");
+    expect([lastFlowRequest().startTime, lastFlowRequest().endTime]).toEqual([
+      CUSTOM_START.toISOString(),
+      CUSTOM_END.toISOString(),
+    ]);
+    expect(empty).toHaveTextContent("No flows in the selected time range.");
+    expect(empty).toHaveTextContent(
+      "This device sent no flow records in this window.",
+    );
+    expect(empty).not.toHaveTextContent("Double-click");
+    expect(empty).not.toHaveTextContent("No flow data yet.");
+    expect(empty).not.toHaveClass("select-none");
+  });
+
+  test("a quiet zoom inside a custom range points back to the time range before the zoom", async () => {
+    await renderCard();
+    fireEvent.click(
+      screen.getByRole("button", { name: "Pick 09:00 to 10:00" }),
+    );
+    await flush();
+    await waitFor(() => {
+      expect(tileValue("Flows")).toBe("60");
+    });
+    answerWith((request: FlowRequest) => {
+      return requestMinutes(request) < 60
+        ? quietResponse(request)
+        : flowResponse(request);
+    });
+
+    await dragAcrossBandwidth(
+      new Date("2026-09-28T09:10:00.000Z"),
+      new Date("2026-09-28T09:20:00.000Z"),
+    );
+
+    const empty: HTMLElement = await screen.findByTestId("flow-no-data");
+    expect(empty).toHaveTextContent(
+      "Double-click here, or use Reset zoom, to go back to the time range before the zoom.",
+    );
+  });
+
+  test("while a reset from a quiet zoom refetches, the empty state keeps its words: the setup steps never flash up", async () => {
+    await renderCard();
+    answerWith((request: FlowRequest) => {
+      return requestMinutes(request) < 60
+        ? quietResponse(request)
+        : flowResponse(request);
+    });
+    await dragAcrossBandwidth();
+    const empty: HTMLElement = await screen.findByTestId("flow-no-data");
+    const resetFetch: HeldFetch = holdNextFetch();
+
+    fireEvent.doubleClick(empty);
+    await flush();
+
+    // The picker is back on the past hour, but the data is still the zoom's.
+    expect(pickerLabel()).toBe(TimeRange.PAST_ONE_HOUR);
+    expect(screen.getByTestId("flow-no-data")).toHaveTextContent(
+      "No flows in the selected time range.",
+    );
+    expect(screen.getByTestId("flow-no-data")).not.toHaveTextContent(
+      "No flow data yet.",
+    );
+    expectRefreshingOverLastData();
+
+    await resetFetch.land(flowResponse(lastFlowRequest()));
+
+    expect(chart()).toBeInTheDocument();
+    expect(tileValue("Flows")).toBe("60");
+    expectSettled();
+  });
+});
+
+describe("Traffic card: a two-week window draws every bucket, peaking at its Max (sdn-1, end to end)", () => {
+  test("the whole card over a two-week response: one row per bucket, and the burst is drawn at 900 Mbps", async () => {
+    await renderCard();
+    answerWith((request: FlowRequest) => {
+      return flowResponse(request, 900);
+    });
+
+    fireEvent.click(screen.getByRole("button", { name: "Pick Past 2 Weeks" }));
+    await flush();
+    await waitFor(() => {
+      expect(tileValue("Flows")).toBe(TWO_WEEKS_OF_FLOWS);
+    });
+
+    const props: { data: Array<SeriesPoints>; xAxis: XAxis; yAxis: YAxis } =
+      getStandInChart(BANDWIDTH_CHART).props as unknown as {
+        data: Array<SeriesPoints>;
+        xAxis: XAxis;
+        yAxis: YAxis;
+      };
+    const rows: Array<ChartDataPoint> = DataPointUtil.getChartDataPoints({
+      seriesPoints: props.data,
+      xAxis: props.xAxis,
+      yAxis: props.yAxis,
+    });
+    const plotted: Array<number> = rows
+      .map((row: ChartDataPoint): unknown => {
+        return row["Bandwidth"];
+      })
+      .filter((value: unknown): value is number => {
+        return typeof value === "number";
+      });
+
+    // 168-minute buckets: 121 of them, each its own point.
+    expect(props.data[0]!.data).toHaveLength(121);
+    expect(plotted).toHaveLength(121);
+    expect(Math.max(...plotted)).toBe(900);
+    expect(screen.getByText("Max").parentElement).toHaveTextContent(
+      "Max 900 Mbps",
+    );
+  });
+});