@oneuptime/common 13.0.5 → 13.0.7

package/Tests/Utils/Slo/SloProjection.test.ts

@@ -0,0 +1,1039 @@
+import AggregationInterval from "../../../Types/BaseDatabase/AggregationInterval";
+import SloMultiMonitorMode from "../../../Types/ServiceLevelObjective/SloMultiMonitorMode";
+import SloWindowType from "../../../Types/ServiceLevelObjective/SloWindowType";
+import {
+  getSloBudgetTier,
+  isRollingWindowNotYetFull,
+  SloBudgetTier,
+} from "../../../Utils/Slo/SloHealth";
+import {
+  getLowestBurnRateThreshold,
+  getRollingWindowFill,
+  getRollingWindowFillFraction,
+  getSliDeltaPercentagePoints,
+  getSliDeltaText,
+  getSloAllowedDowntime,
+  getSloBudgetBarGeometry,
+  getSloBudgetRunway,
+  getSloChartBucketSeconds,
+  getSloComplianceWindowRange,
+  getSloIdealBurnPoints,
+  isBurnRateAtOrAboveThreshold,
+  isSliBelowTarget,
+  SloAllowedDowntime,
+  SloBudgetBarGeometry,
+  SloBudgetRunway,
+  SloBudgetRunwayData,
+  SloBudgetRunwayKind,
+  SloComplianceWindowRange,
+  SloIdealBurnPoint,
+  SloProjectionTone,
+  SloRollingWindowFill,
+  SloRollingWindowFillData,
+} from "../../../Utils/Slo/SloProjection";
+import { describe, expect, test } from "@jest/globals";
+
+/*
+ * The SLO overview's forward-looking numbers. Every clock is fixed and every
+ * calendar case names its timezone, so nothing here depends on when or where
+ * the suite runs.
+ */
+
+const DAY_SECONDS: number = 24 * 60 * 60;
+
+// A Tuesday in mid-September: 15.5 days before the UTC month resets.
+const NOW: Date = new Date("2026-09-15T12:00:00.000Z");
+const SECONDS_UNTIL_UTC_RESET: number = 15.5 * DAY_SECONDS;
+
+type RunwayFunction = (
+  overrides: Partial<SloBudgetRunwayData>,
+) => SloBudgetRunway;
+
+const runway: RunwayFunction = (
+  overrides: Partial<SloBudgetRunwayData>,
+): SloBudgetRunway => {
+  return getSloBudgetRunway({
+    windowType: SloWindowType.Rolling,
+    windowDays: 30,
+    timezone: "UTC",
+    targetPercentage: 99.9,
+    multiMonitorMode: SloMultiMonitorMode.AnyDown,
+    errorBudgetRemainingSeconds: 1300,
+    currentBurnRate: 2,
+    now: NOW,
+    ...overrides,
+  });
+};
+
+describe("getRollingWindowFillFraction", () => {
+  // 99.9% over 30 days allows 2592 seconds of downtime.
+  const base: SloRollingWindowFillData = {
+    windowType: SloWindowType.Rolling,
+    windowDays: 30,
+    targetPercentage: 99.9,
+    errorBudgetTotalSeconds: 648,
+    multiMonitorMode: SloMultiMonitorMode.AnyDown,
+  };
+
+  test("is the prorated budget over the full-window budget", () => {
+    expect(getRollingWindowFillFraction(base)).toBeCloseTo(0.25, 9);
+  });
+
+  test("clamps a budget slightly over the full window to 1", () => {
+    expect(
+      getRollingWindowFillFraction({ ...base, errorBudgetTotalSeconds: 3000 }),
+    ).toBe(1);
+  });
+
+  test("uses the 30-day default when windowDays is missing", () => {
+    expect(
+      getRollingWindowFillFraction({ ...base, windowDays: null }),
+    ).toBeCloseTo(0.25, 9);
+    expect(
+      getRollingWindowFillFraction({ ...base, windowDays: undefined }),
+    ).toBeCloseTo(0.25, 9);
+  });
+
+  test("does not apply to calendar months, whose budget is never prorated", () => {
+    expect(
+      getRollingWindowFillFraction({
+        ...base,
+        windowType: SloWindowType.CalendarMonth,
+      }),
+    ).toBeNull();
+  });
+
+  test("does not apply to Monitor Seconds Average, whose budget sums monitors", () => {
+    expect(
+      getRollingWindowFillFraction({
+        ...base,
+        multiMonitorMode: SloMultiMonitorMode.MonitorSecondsAverage,
+      }),
+    ).toBeNull();
+  });
+
+  test.each([
+    ["missing", undefined],
+    ["null", null],
+    ["zero", 0],
+    ["negative", -10],
+    ["NaN", NaN],
+  ])(
+    "is null when the budget total is %s",
+    (_label: string, total: number | null | undefined) => {
+      expect(
+        getRollingWindowFillFraction({
+          ...base,
+          errorBudgetTotalSeconds: total,
+        }),
+      ).toBeNull();
+    },
+  );
+
+  test.each([
+    ["missing", null],
+    ["zero", 0],
+    ["one hundred", 100],
+    ["above one hundred", 120],
+  ])(
+    "is null when the target is %s",
+    (_label: string, target: number | null) => {
+      expect(
+        getRollingWindowFillFraction({ ...base, targetPercentage: target }),
+      ).toBeNull();
+    },
+  );
+
+  test("is null for a window of zero or negative days", () => {
+    expect(getRollingWindowFillFraction({ ...base, windowDays: 0 })).toBeNull();
+    expect(
+      getRollingWindowFillFraction({ ...base, windowDays: -5 }),
+    ).toBeNull();
+  });
+
+  /*
+   * The chip that replaced the "Window not yet full" banner must appear in
+   * exactly the cases the banner did. Fractions are kept clear of the 0.99
+   * boundary itself, where the two computations can differ in the last bit.
+   */
+  describe("agrees with SloHealth.isRollingWindowNotYetFull", () => {
+    const cases: Array<[number, number, number]> = [];
+
+    for (const windowDays of [1, 7, 30, 90]) {
+      for (const target of [90, 99, 99.5, 99.9, 99.99]) {
+        for (const fraction of [
+          0.0001, 0.1, 0.5, 0.9, 0.98, 0.9899, 0.9901, 0.995, 1, 1.3,
+        ]) {
+          cases.push([windowDays, target, fraction]);
+        }
+      }
+    }
+
+    test.each(cases)(
+      "%d days at %d%% with %d of the window filled",
+      (windowDays: number, target: number, fraction: number) => {
+        const data: SloRollingWindowFillData = {
+          windowType: SloWindowType.Rolling,
+          windowDays: windowDays,
+          targetPercentage: target,
+          errorBudgetTotalSeconds:
+            fraction * (1 - target / 100) * windowDays * DAY_SECONDS,
+          multiMonitorMode: SloMultiMonitorMode.AnyDown,
+        };
+
+        const computed: number | null = getRollingWindowFillFraction(data);
+
+        expect(computed).not.toBeNull();
+        expect(computed! < 0.99).toBe(isRollingWindowNotYetFull(data));
+      },
+    );
+  });
+});
+
+describe("getRollingWindowFill", () => {
+  const base: SloRollingWindowFillData = {
+    windowType: SloWindowType.Rolling,
+    windowDays: 30,
+    targetPercentage: 99.9,
+    errorBudgetTotalSeconds: 648,
+    multiMonitorMode: SloMultiMonitorMode.AnyDown,
+  };
+
+  test("labels a young window with a floored percentage", () => {
+    const fill: SloRollingWindowFill | null = getRollingWindowFill(base);
+
+    expect(fill).not.toBeNull();
+    // Exactly a quarter must not float-floor to 24%.
+    expect(fill!.percent).toBe(25);
+    expect(fill!.label).toBe("Window 25% full");
+    expect(fill!.isNotYetFull).toBe(true);
+  });
+
+  test("never rounds a nearly full window up to 100%", () => {
+    const fill: SloRollingWindowFill | null = getRollingWindowFill({
+      ...base,
+      errorBudgetTotalSeconds: 2592 * 0.995,
+    });
+
+    expect(fill!.percent).toBe(99);
+    // Within the 1% tolerance: mature, so the hint is not shown.
+    expect(fill!.isNotYetFull).toBe(false);
+  });
+
+  test("says 'under 1%' for a brand-new SLO rather than '0% full'", () => {
+    const fill: SloRollingWindowFill | null = getRollingWindowFill({
+      ...base,
+      errorBudgetTotalSeconds: 10,
+    });
+
+    expect(fill!.percent).toBe(0);
+    expect(fill!.label).toBe("Window under 1% full");
+    expect(fill!.isNotYetFull).toBe(true);
+  });
+
+  test("is null whenever the fraction is", () => {
+    expect(
+      getRollingWindowFill({
+        ...base,
+        windowType: SloWindowType.CalendarMonth,
+      }),
+    ).toBeNull();
+    expect(
+      getRollingWindowFill({ ...base, errorBudgetTotalSeconds: null }),
+    ).toBeNull();
+  });
+});
+
+describe("getSloBudgetRunway", () => {
+  describe("placeholders", () => {
+    test("says 'not evaluated' until the worker has written the budget", () => {
+      expect(runway({ errorBudgetRemainingSeconds: null })).toEqual({
+        kind: SloBudgetRunwayKind.NotEvaluated,
+        tone: SloProjectionTone.Neutral,
+        value: "—",
+        description: "Not evaluated yet",
+        runwaySeconds: null,
+        secondsUntilReset: null,
+      });
+    });
+
+    test("says 'not evaluated' while the burn rate is missing or not a number", () => {
+      expect(runway({ currentBurnRate: undefined }).kind).toBe(
+        SloBudgetRunwayKind.NotEvaluated,
+      );
+      expect(runway({ currentBurnRate: NaN }).kind).toBe(
+        SloBudgetRunwayKind.NotEvaluated,
+      );
+      expect(runway({ errorBudgetRemainingSeconds: Infinity }).kind).toBe(
+        SloBudgetRunwayKind.NotEvaluated,
+      );
+    });
+
+    test("hides the projection for Monitor Seconds Average, whose seconds are monitor-seconds", () => {
+      expect(
+        runway({ multiMonitorMode: SloMultiMonitorMode.MonitorSecondsAverage }),
+      ).toEqual({
+        kind: SloBudgetRunwayKind.NotProjected,
+        tone: SloProjectionTone.Neutral,
+        value: "—",
+        description: "Not projected when downtime is averaged across monitors",
+        runwaySeconds: null,
+        secondsUntilReset: null,
+      });
+    });
+
+    test.each([[null], [0], [100], [101]])(
+      "does not project with an unusable target (%p)",
+      (target: number | null) => {
+        const result: SloBudgetRunway = runway({ targetPercentage: target });
+
+        expect(result.kind).toBe(SloBudgetRunwayKind.NotProjected);
+        expect(result.description).toBe("Needs a target between 0% and 100%");
+      },
+    );
+  });
+
+  describe("overspent", () => {
+    test("says by how much a rolling budget is over", () => {
+      expect(runway({ errorBudgetRemainingSeconds: -750 })).toEqual({
+        kind: SloBudgetRunwayKind.Overspent,
+        tone: SloProjectionTone.Danger,
+        value: "Overspent",
+        description: "12m 30s over budget",
+        runwaySeconds: 0,
+        secondsUntilReset: null,
+      });
+    });
+
+    test("an exactly empty budget is spent, not overspent by 0s", () => {
+      const result: SloBudgetRunway = runway({
+        errorBudgetRemainingSeconds: 0,
+      });
+
+      expect(result.kind).toBe(SloBudgetRunwayKind.Overspent);
+      expect(result.description).toBe("Budget fully spent");
+    });
+
+    test("a calendar month also says when the budget comes back", () => {
+      const result: SloBudgetRunway = runway({
+        windowType: SloWindowType.CalendarMonth,
+        errorBudgetRemainingSeconds: -750,
+      });
+
+      expect(result.description).toBe(
+        "12m 30s over budget · resets in 15d 12h",
+      );
+      expect(result.secondsUntilReset).toBe(SECONDS_UNTIL_UTC_RESET);
+    });
+
+    test("overspent wins even when nothing is burning right now", () => {
+      expect(
+        runway({ errorBudgetRemainingSeconds: -1, currentBurnRate: 0 }).kind,
+      ).toBe(SloBudgetRunwayKind.Overspent);
+    });
+  });
+
+  describe("not burning", () => {
+    test("names the lookback the burn rate was measured over", () => {
+      expect(runway({ currentBurnRate: 0 })).toEqual({
+        kind: SloBudgetRunwayKind.NotBurning,
+        tone: SloProjectionTone.Good,
+        value: "Not burning",
+        description: "No budget spent in the last 1h",
+        runwaySeconds: null,
+        secondsUntilReset: null,
+      });
+    });
+
+    test("treats an impossible negative burn as no burn", () => {
+      expect(runway({ currentBurnRate: -3 }).kind).toBe(
+        SloBudgetRunwayKind.NotBurning,
+      );
+    });
+
+    test("a calendar month adds the reset", () => {
+      expect(
+        runway({
+          windowType: SloWindowType.CalendarMonth,
+          currentBurnRate: 0,
+        }).description,
+      ).toBe("No budget spent in the last 1h · resets in 15d 12h");
+    });
+  });
+
+  describe("rolling windows", () => {
+    test("projects remaining / (burn x allowed) and flags a multi-day runway as a warning", () => {
+      // 1300 / (2 x 0.001) = 650,000s = 7d 12h 33m 20s.
+      const result: SloBudgetRunway = runway({
+        errorBudgetRemainingSeconds: 1300,
+        currentBurnRate: 2,
+      });
+
+      expect(result.kind).toBe(SloBudgetRunwayKind.RunsOut);
+      expect(result.tone).toBe(SloProjectionTone.Warning);
+      expect(result.value).toBe("~7d 12h");
+      expect(result.description).toBe(
+        "Until exhausted, at the burn rate of the last 1h",
+      );
+      expect(result.runwaySeconds).toBeCloseTo(650000, 3);
+      expect(result.secondsUntilReset).toBeNull();
+    });
+
+    test("a runway of a day or less is an emergency", () => {
+      // 30 / (14.4 x 0.001) = 2083.3s.
+      const result: SloBudgetRunway = runway({
+        errorBudgetRemainingSeconds: 30,
+        currentBurnRate: 14.4,
+      });
+
+      expect(result.tone).toBe(SloProjectionTone.Danger);
+      expect(result.value).toBe("~34m 43s");
+    });
+
+    test("exactly one day is still danger; just over a day is a warning", () => {
+      // Target 75% leaves an exact 0.25, so these runways are exact.
+      expect(
+        runway({
+          targetPercentage: 75,
+          errorBudgetRemainingSeconds: 0.25 * DAY_SECONDS,
+          currentBurnRate: 1,
+        }).tone,
+      ).toBe(SloProjectionTone.Danger);
+
+      expect(
+        runway({
+          targetPercentage: 75,
+          errorBudgetRemainingSeconds: 0.25 * DAY_SECONDS + 1,
+          currentBurnRate: 1,
+        }).tone,
+      ).toBe(SloProjectionTone.Warning);
+    });
+
+    test("under a minute reads 'Under 1m', not '~0s'", () => {
+      const result: SloBudgetRunway = runway({
+        targetPercentage: 75,
+        errorBudgetRemainingSeconds: 10,
+        currentBurnRate: 1,
+      });
+
+      expect(result.value).toBe("Under 1m");
+      expect(result.tone).toBe(SloProjectionTone.Danger);
+      expect(result.runwaySeconds).toBe(40);
+    });
+
+    test("sanity: a full budget burning at exactly 1x lasts exactly one window", () => {
+      // 0.25 x 30 days of budget at 1x.
+      const result: SloBudgetRunway = runway({
+        targetPercentage: 75,
+        errorBudgetRemainingSeconds: 0.25 * 30 * DAY_SECONDS,
+        currentBurnRate: 1,
+      });
+
+      expect(result.runwaySeconds).toBe(30 * DAY_SECONDS);
+      expect(result.kind).toBe(SloBudgetRunwayKind.Sustainable);
+    });
+
+    test("a full 99.9% budget at 1x is sustainable despite float error in the allowed fraction", () => {
+      const result: SloBudgetRunway = runway({
+        targetPercentage: 99.9,
+        errorBudgetRemainingSeconds: 2592,
+        currentBurnRate: 1,
+      });
+
+      expect(result.runwaySeconds).toBeCloseTo(30 * DAY_SECONDS, 3);
+      expect(result.kind).toBe(SloBudgetRunwayKind.Sustainable);
+    });
+
+    test("a runway beyond the window is sustainable — the budget regenerates faster than it burns", () => {
+      // 2000 / (0.5 x 0.001) = 4,000,000s, well past 30 days.
+      expect(
+        runway({ errorBudgetRemainingSeconds: 2000, currentBurnRate: 0.5 }),
+      ).toEqual({
+        kind: SloBudgetRunwayKind.Sustainable,
+        tone: SloProjectionTone.Good,
+        value: "Sustainable",
+        description:
+          "Outlasts the 30-day window, at the burn rate of the last 1h",
+        runwaySeconds: expect.closeTo(4000000, 3),
+        secondsUntilReset: null,
+      });
+    });
+
+    test("measures sustainability against the SLO's own window, defaulting to 30 days", () => {
+      const sevenDayRunway: SloBudgetRunway = runway({
+        windowDays: 7,
+        targetPercentage: 75,
+        errorBudgetRemainingSeconds: 0.25 * 10 * DAY_SECONDS,
+        currentBurnRate: 1,
+      });
+
+      expect(sevenDayRunway.kind).toBe(SloBudgetRunwayKind.Sustainable);
+      expect(sevenDayRunway.description).toBe(
+        "Outlasts the 7-day window, at the burn rate of the last 1h",
+      );
+
+      // 10 days of runway is short of the 30-day default window.
+      expect(
+        runway({
+          windowDays: null,
+          targetPercentage: 75,
+          errorBudgetRemainingSeconds: 0.25 * 10 * DAY_SECONDS,
+          currentBurnRate: 1,
+        }).kind,
+      ).toBe(SloBudgetRunwayKind.RunsOut);
+    });
+  });
+
+  describe("calendar months", () => {
+    test("a budget that runs out before the reset says so, with the reset", () => {
+      // 1000 / (1 x 0.001) = 1,000,000s = 11d 13h 46m 40s < 15d 12h.
+      const result: SloBudgetRunway = runway({
+        windowType: SloWindowType.CalendarMonth,
+        errorBudgetRemainingSeconds: 1000,
+        currentBurnRate: 1,
+      });
+
+      expect(result.kind).toBe(SloBudgetRunwayKind.RunsOut);
+      expect(result.value).toBe("~11d 13h");
+      expect(result.description).toBe(
+        "Until exhausted, at the burn rate of the last 1h · resets in 15d 12h",
+      );
+      expect(result.secondsUntilReset).toBe(SECONDS_UNTIL_UTC_RESET);
+    });
+
+    test("a budget that outlasts the month lasts until reset", () => {
+      expect(
+        runway({
+          windowType: SloWindowType.CalendarMonth,
+          errorBudgetRemainingSeconds: 2000,
+          currentBurnRate: 1,
+        }),
+      ).toEqual({
+        kind: SloBudgetRunwayKind.LastsUntilReset,
+        tone: SloProjectionTone.Good,
+        value: "Lasts until reset",
+        description: "Resets in 15d 12h, at the burn rate of the last 1h",
+        runwaySeconds: expect.closeTo(2000000, 3),
+        secondsUntilReset: SECONDS_UNTIL_UTC_RESET,
+      });
+    });
+
+    test("never reports a calendar month as 'sustainable'", () => {
+      // A runway longer than 30 days but still... after the reset: lasts until reset.
+      expect(
+        runway({
+          windowType: SloWindowType.CalendarMonth,
+          errorBudgetRemainingSeconds: 5000,
+          currentBurnRate: 0.01,
+        }).kind,
+      ).toBe(SloBudgetRunwayKind.LastsUntilReset);
+    });
+
+    test("resolves the reset in the SLO's timezone, not UTC", () => {
+      // 20:00 UTC on Sep 30 is already 05:00 on Oct 1 in Tokyo.
+      const tokyoNow: Date = new Date("2026-09-30T20:00:00.000Z");
+
+      const tokyo: SloBudgetRunway = runway({
+        windowType: SloWindowType.CalendarMonth,
+        timezone: "Asia/Tokyo",
+        currentBurnRate: 0,
+        now: tokyoNow,
+      });
+
+      // Until 2026-11-01T00:00 JST = 2026-10-31T15:00Z.
+      expect(tokyo.secondsUntilReset).toBe(30 * DAY_SECONDS + 19 * 3600);
+      expect(tokyo.description).toBe(
+        "No budget spent in the last 1h · resets in 30d 19h",
+      );
+
+      const utc: SloBudgetRunway = runway({
+        windowType: SloWindowType.CalendarMonth,
+        timezone: "UTC",
+        currentBurnRate: 0,
+        now: tokyoNow,
+      });
+
+      expect(utc.secondsUntilReset).toBe(4 * 3600);
+    });
+
+    test("a missing timezone means UTC, as it does for the worker", () => {
+      expect(
+        runway({
+          windowType: SloWindowType.CalendarMonth,
+          timezone: null,
+          currentBurnRate: 0,
+        }).secondsUntilReset,
+      ).toBe(SECONDS_UNTIL_UTC_RESET);
+    });
+
+    test("an unknown timezone drops the reset rather than guessing one", () => {
+      const result: SloBudgetRunway = runway({
+        windowType: SloWindowType.CalendarMonth,
+        timezone: "Mars/Olympus_Mons",
+        errorBudgetRemainingSeconds: 2000,
+        currentBurnRate: 1,
+      });
+
+      expect(result.secondsUntilReset).toBeNull();
+      expect(result.kind).toBe(SloBudgetRunwayKind.RunsOut);
+      expect(result.value).toBe("~23d 3h");
+      expect(result.description).toBe(
+        "Until exhausted, at the burn rate of the last 1h",
+      );
+    });
+  });
+});
+
+describe("getSloBudgetBarGeometry", () => {
+  test("draws nothing that reads as a claim before the first evaluation", () => {
+    expect(
+      getSloBudgetBarGeometry({ errorBudgetRemainingPercentage: null }),
+    ).toEqual({
+      isEvaluated: false,
+      fillPercent: 0,
+      markerPercent: 20,
+      atRiskThresholdPercentage: 20,
+      tier: SloBudgetTier.Unknown,
+      isOverspent: false,
+    });
+  });
+
+  test("fills to the remaining percentage and marks the SLO's own threshold", () => {
+    expect(
+      getSloBudgetBarGeometry({
+        errorBudgetRemainingPercentage: 42.5,
+        atRiskThresholdPercentage: 25,
+      }),
+    ).toEqual({
+      isEvaluated: true,
+      fillPercent: 42.5,
+      markerPercent: 25,
+      atRiskThresholdPercentage: 25,
+      tier: SloBudgetTier.Healthy,
+      isOverspent: false,
+    });
+  });
+
+  test("clamps an overspent budget to an empty bar but still says it is overspent", () => {
+    const geometry: SloBudgetBarGeometry = getSloBudgetBarGeometry({
+      errorBudgetRemainingPercentage: -340,
+      atRiskThresholdPercentage: 20,
+    });
+
+    expect(geometry.fillPercent).toBe(0);
+    expect(geometry.isOverspent).toBe(true);
+    expect(geometry.tier).toBe(SloBudgetTier.Exhausted);
+  });
+
+  test("an exactly empty budget is exhausted but not overspent", () => {
+    const geometry: SloBudgetBarGeometry = getSloBudgetBarGeometry({
+      errorBudgetRemainingPercentage: 0,
+    });
+
+    expect(geometry.isOverspent).toBe(false);
+    expect(geometry.tier).toBe(SloBudgetTier.Exhausted);
+  });
+
+  test("clamps the fill to 100", () => {
+    expect(
+      getSloBudgetBarGeometry({ errorBudgetRemainingPercentage: 100.4 })
+        .fillPercent,
+    ).toBe(100);
+  });
+
+  test("clamps the marker onto the track but keeps the real threshold", () => {
+    const high: SloBudgetBarGeometry = getSloBudgetBarGeometry({
+      errorBudgetRemainingPercentage: 50,
+      atRiskThresholdPercentage: 150,
+    });
+
+    expect(high.markerPercent).toBe(100);
+    expect(high.atRiskThresholdPercentage).toBe(150);
+
+    expect(
+      getSloBudgetBarGeometry({
+        errorBudgetRemainingPercentage: 50,
+        atRiskThresholdPercentage: -5,
+      }).markerPercent,
+    ).toBe(0);
+  });
+
+  test("falls back to the default threshold for a missing or non-finite one", () => {
+    expect(
+      getSloBudgetBarGeometry({
+        errorBudgetRemainingPercentage: 50,
+        atRiskThresholdPercentage: NaN,
+      }).markerPercent,
+    ).toBe(20);
+  });
+
+  test.each([
+    [-1, 20],
+    [0, 20],
+    [5, 20],
+    [20, 20],
+    [20.01, 20],
+    [35, 40],
+    [40, 40],
+    [41, 40],
+    [99, undefined],
+  ])(
+    "uses exactly getSloBudgetTier's tier (%p remaining, threshold %p)",
+    (remaining: number, threshold: number | undefined) => {
+      expect(
+        getSloBudgetBarGeometry({
+          errorBudgetRemainingPercentage: remaining,
+          atRiskThresholdPercentage: threshold,
+        }).tier,
+      ).toBe(
+        getSloBudgetTier({
+          errorBudgetRemainingPercentage: remaining,
+          atRiskThresholdPercentage: threshold,
+        }),
+      );
+    },
+  );
+});
+
+describe("SLI versus target", () => {
+  test("says how far above the target the SLI is, in percentage points", () => {
+    expect(
+      getSliDeltaText({ currentSliPercentage: 99.95, targetPercentage: 99.9 }),
+    ).toBe("0.05 pp above the 99.9% target");
+  });
+
+  test("says how far below", () => {
+    expect(
+      getSliDeltaText({ currentSliPercentage: 99.812, targetPercentage: 99.9 }),
+    ).toBe("0.088 pp below the 99.9% target");
+  });
+
+  test("exactly on target", () => {
+    expect(
+      getSliDeltaText({ currentSliPercentage: 99.9, targetPercentage: 99.9 }),
+    ).toBe("Exactly on the 99.9% target");
+  });
+
+  test("a gap that rounds to zero still says which side it is on", () => {
+    expect(
+      getSliDeltaText({
+        currentSliPercentage: 99.9004,
+        targetPercentage: 99.9,
+      }),
+    ).toBe("Just above the 99.9% target");
+    expect(
+      getSliDeltaText({
+        currentSliPercentage: 99.8996,
+        targetPercentage: 99.9,
+      }),
+    ).toBe("Just below the 99.9% target");
+  });
+
+  test("is null when either number is unknown", () => {
+    expect(
+      getSliDeltaText({ currentSliPercentage: null, targetPercentage: 99.9 }),
+    ).toBeNull();
+    expect(
+      getSliDeltaText({
+        currentSliPercentage: 99.9,
+        targetPercentage: undefined,
+      }),
+    ).toBeNull();
+  });
+
+  test("the rounded delta never prints -0", () => {
+    expect(
+      Object.is(
+        getSliDeltaPercentagePoints({
+          currentSliPercentage: 99.8996,
+          targetPercentage: 99.9,
+        }),
+        0,
+      ),
+    ).toBe(true);
+  });
+
+  test("isSliBelowTarget compares unrounded and is false when unknown", () => {
+    expect(
+      isSliBelowTarget({
+        currentSliPercentage: 99.8996,
+        targetPercentage: 99.9,
+      }),
+    ).toBe(true);
+    expect(
+      isSliBelowTarget({ currentSliPercentage: 99.9, targetPercentage: 99.9 }),
+    ).toBe(false);
+    expect(
+      isSliBelowTarget({ currentSliPercentage: null, targetPercentage: 99.9 }),
+    ).toBe(false);
+  });
+});
+
+describe("burn rate thresholds", () => {
+  test("picks the lowest usable threshold, skipping ones the worker skips", () => {
+    expect(
+      getLowestBurnRateThreshold([14.4, 6, undefined, null, 0, -1, NaN, 2]),
+    ).toBe(2);
+  });
+
+  test("is null when no threshold is usable", () => {
+    expect(getLowestBurnRateThreshold([])).toBeNull();
+    expect(getLowestBurnRateThreshold([null, 0, -2])).toBeNull();
+  });
+
+  test("compares with >= like the worker, and is false when anything is unknown", () => {
+    expect(isBurnRateAtOrAboveThreshold({ burnRate: 2, threshold: 2 })).toBe(
+      true,
+    );
+    expect(isBurnRateAtOrAboveThreshold({ burnRate: 1.99, threshold: 2 })).toBe(
+      false,
+    );
+    expect(isBurnRateAtOrAboveThreshold({ burnRate: null, threshold: 2 })).toBe(
+      false,
+    );
+    expect(isBurnRateAtOrAboveThreshold({ burnRate: 5, threshold: null })).toBe(
+      false,
+    );
+    expect(isBurnRateAtOrAboveThreshold({ burnRate: 5, threshold: 0 })).toBe(
+      false,
+    );
+  });
+});
+
+describe("getSloAllowedDowntime", () => {
+  test("restates a rolling target as downtime per window", () => {
+    const allowed: SloAllowedDowntime | null = getSloAllowedDowntime({
+      targetPercentage: 99.9,
+      windowType: SloWindowType.Rolling,
+      windowDays: 30,
+      now: NOW,
+    });
+
+    expect(allowed!.seconds).toBeCloseTo(2592, 6);
+    expect(allowed!.periodText).toBe("per rolling 30 days");
+  });
+
+  test("singular day, and the 30-day default", () => {
+    expect(
+      getSloAllowedDowntime({
+        targetPercentage: 75,
+        windowDays: 1,
+        now: NOW,
+      })!.periodText,
+    ).toBe("per rolling 1 day");
+
+    expect(
+      getSloAllowedDowntime({
+        targetPercentage: 75,
+        windowDays: null,
+        now: NOW,
+      })!.seconds,
+    ).toBe(0.25 * 30 * DAY_SECONDS);
+  });
+
+  test("a calendar month uses this month's real length", () => {
+    const february: SloAllowedDowntime | null = getSloAllowedDowntime({
+      targetPercentage: 75,
+      windowType: SloWindowType.CalendarMonth,
+      timezone: "UTC",
+      now: new Date("2026-02-10T00:00:00.000Z"),
+    });
+
+    expect(february!.seconds).toBe(0.25 * 28 * DAY_SECONDS);
+    expect(february!.periodText).toBe("this calendar month");
+  });
+
+  test("a DST month in the SLO's timezone is an hour short", () => {
+    // US clocks spring forward on 2026-03-08.
+    expect(
+      getSloAllowedDowntime({
+        targetPercentage: 75,
+        windowType: SloWindowType.CalendarMonth,
+        timezone: "America/New_York",
+        now: new Date("2026-03-15T12:00:00.000Z"),
+      })!.seconds,
+    ).toBe(0.25 * (31 * DAY_SECONDS - 3600));
+  });
+
+  test("rounds away the float error that made the card read 43m 11s", () => {
+    // 1 - 99.9 / 100 is 0.0010000000000000009, and the formatters floor.
+    expect(
+      getSloAllowedDowntime({
+        targetPercentage: 99.9,
+        windowType: SloWindowType.Rolling,
+        windowDays: 30,
+        now: NOW,
+      })!.seconds,
+    ).toBe(2592);
+
+    // 1 - 99.95 / 100 lands just BELOW 0.0005, which floored 21m 36s to 21m 35s.
+    expect(
+      getSloAllowedDowntime({
+        targetPercentage: 99.95,
+        windowType: SloWindowType.CalendarMonth,
+        timezone: "Europe/Berlin",
+        now: new Date("2026-09-15T12:00:00.000Z"),
+      })!.seconds,
+    ).toBe(1296);
+  });
+
+  test("keeps a genuinely fractional allowance", () => {
+    expect(
+      getSloAllowedDowntime({
+        targetPercentage: 99.999,
+        windowDays: 1,
+        now: NOW,
+      })!.seconds,
+    ).toBe(0.864);
+  });
+
+  test("is null for an unusable target or an unknown calendar timezone", () => {
+    expect(
+      getSloAllowedDowntime({ targetPercentage: 100, now: NOW }),
+    ).toBeNull();
+    expect(
+      getSloAllowedDowntime({
+        targetPercentage: 99.9,
+        windowType: SloWindowType.CalendarMonth,
+        timezone: "Mars/Olympus_Mons",
+        now: NOW,
+      }),
+    ).toBeNull();
+  });
+});
+
+describe("getSloComplianceWindowRange", () => {
+  test("a rolling window ends now and starts its own length ago", () => {
+    const range: SloComplianceWindowRange = getSloComplianceWindowRange({
+      windowType: SloWindowType.Rolling,
+      windowDays: 7,
+      now: NOW,
+    });
+
+    expect(range.startDate.toISOString()).toBe("2026-09-08T12:00:00.000Z");
+    expect(range.endDate).toBe(NOW);
+    expect(range.axisEndDate).toBe(NOW);
+  });
+
+  test("a rolling window without days uses 30", () => {
+    expect(
+      getSloComplianceWindowRange({
+        windowDays: null,
+        now: NOW,
+      }).startDate.toISOString(),
+    ).toBe("2026-08-16T12:00:00.000Z");
+  });
+
+  test("a calendar month runs from the start of the month to its reset, in the SLO's timezone", () => {
+    const range: SloComplianceWindowRange = getSloComplianceWindowRange({
+      windowType: SloWindowType.CalendarMonth,
+      timezone: "Asia/Tokyo",
+      now: new Date("2026-09-30T20:00:00.000Z"),
+    });
+
+    expect(range.startDate.toISOString()).toBe("2026-09-30T15:00:00.000Z");
+    expect(range.endDate.toISOString()).toBe("2026-09-30T20:00:00.000Z");
+    expect(range.axisEndDate.toISOString()).toBe("2026-10-31T15:00:00.000Z");
+  });
+
+  test("an unknown calendar timezone still charts the UTC month", () => {
+    const range: SloComplianceWindowRange = getSloComplianceWindowRange({
+      windowType: SloWindowType.CalendarMonth,
+      timezone: "Mars/Olympus_Mons",
+      now: NOW,
+    });
+
+    expect(range.startDate.toISOString()).toBe("2026-09-01T00:00:00.000Z");
+    expect(range.axisEndDate.toISOString()).toBe("2026-10-01T00:00:00.000Z");
+  });
+});
+
+describe("getSloIdealBurnPoints", () => {
+  const start: Date = new Date("2026-09-01T00:00:00.000Z");
+  const end: Date = new Date("2026-09-01T04:00:00.000Z");
+
+  test("one point per step from 100% down to 0% at the end", () => {
+    const points: Array<SloIdealBurnPoint> = getSloIdealBurnPoints({
+      startDate: start,
+      endDate: end,
+      stepSeconds: 3600,
+    });
+
+    expect(
+      points.map((point: SloIdealBurnPoint) => {
+        return [point.x.toISOString(), point.y];
+      }),
+    ).toEqual([
+      ["2026-09-01T00:00:00.000Z", 100],
+      ["2026-09-01T01:00:00.000Z", 75],
+      ["2026-09-01T02:00:00.000Z", 50],
+      ["2026-09-01T03:00:00.000Z", 25],
+      ["2026-09-01T04:00:00.000Z", 0],
+    ]);
+  });
+
+  test("is empty for an empty or reversed range", () => {
+    expect(
+      getSloIdealBurnPoints({
+        startDate: end,
+        endDate: start,
+        stepSeconds: 60,
+      }),
+    ).toEqual([]);
+    expect(
+      getSloIdealBurnPoints({
+        startDate: start,
+        endDate: start,
+        stepSeconds: 60,
+      }),
+    ).toEqual([]);
+  });
+
+  test("an unusable step still draws the line end to end", () => {
+    expect(
+      getSloIdealBurnPoints({
+        startDate: start,
+        endDate: end,
+        stepSeconds: 0,
+      }).map((point: SloIdealBurnPoint) => {
+        return point.y;
+      }),
+    ).toEqual([100, 0]);
+  });
+
+  test("caps the point count for a tiny step over a long range", () => {
+    const points: Array<SloIdealBurnPoint> = getSloIdealBurnPoints({
+      startDate: start,
+      endDate: new Date("2026-10-01T00:00:00.000Z"),
+      stepSeconds: 1,
+    });
+
+    expect(points.length).toBeLessThanOrEqual(2001);
+    expect(points[0]!.y).toBe(100);
+    expect(points[points.length - 1]!.y).toBe(0);
+
+    for (let index: number = 1; index < points.length; index++) {
+      expect(points[index]!.y).toBeLessThan(points[index - 1]!.y);
+    }
+  });
+});
+
+describe("getSloChartBucketSeconds", () => {
+  test.each([
+    [AggregationInterval.Minute, 60],
+    [AggregationInterval.FiveMinutes, 300],
+    [AggregationInterval.FifteenMinutes, 900],
+    [AggregationInterval.ThirtyMinutes, 1800],
+    [AggregationInterval.Hour, 3600],
+    [AggregationInterval.Day, DAY_SECONDS],
+    [AggregationInterval.Week, 7 * DAY_SECONDS],
+    [AggregationInterval.Month, null],
+    [AggregationInterval.Year, null],
+    [AggregationInterval.Total, null],
+  ])(
+    "%s is %p seconds",
+    (interval: AggregationInterval, seconds: number | null) => {
+      expect(getSloChartBucketSeconds(interval)).toBe(seconds);
+    },
+  );
+});