@nataliapc/mcp-openmsx 1.1.5 → 1.1.8

package/resources/bios/MSX2_SUBROM_BIOS_calls.md

@@ -0,0 +1,734 @@
+# MSX 2 SUBROM BIOS Entries  
+
+## MSX 2 SUBROM BIOS Entries
+
+These are additional BIOS routines which are available in the MSX 2 standard. No new subrom calls were introduced on the MSX 2+ / turbo R. They are located in the so-called SUBROM, which is an alternate BIOS page, switched when necessary. You can call the SUBROM by putting the jump address in register IX and then calling the BIOS routine `EXTROM` (#15F) or `SUBROM` (#15C). Please note that officially it is illegal to call the SUBROM using `CALSLT` because this will cause trouble with some DiskROMs. Therefore, it cannot be called directly from MSX-DOS environment. There is a workaround for that though, which is described in [this article](#msxdocs://bios/Calling_BIOS_from_MSX-DOS).
+
+* [Basic calls](#basic-calls)
+* [Double BIOS calls](#double-bios-calls)
+* [MSX 2 specific calls](#msx-2-specific-calls)
+* [Palette-functions](#palette-functions)
+* [BIT-BLIT routines](#bit-blit-routines)
+
+### BASIC calls
+
+#### PAINT (Basic!)
+```
+Address  : #0069
+Function : Paints graphical screen
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### PSET (Basic!)
+```
+Address  : #006D
+Function : Sets a point
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### ATRSCN (Basic!)
+```
+Address  : #0071
+Function : Scans color attribute
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### GLINE (Basic!)
+```
+Address  : #0075
+Function : Draws a line
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### DOBOXF (Basic!)
+```
+Address  : #0079
+Function : Draws a filled box
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### DOLINE (Basic!)
+```
+Address  : #007D
+Function : Draws a line
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### BOXLIN (Basic!)
+```
+Address  : #0081
+Function : Draws a box
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### DOGRPH
+```
+Address  : #0085
+Function : Draws a line
+Input    : BC, HL are start coordinates
+           GXPOS, GYPOS are end-coordinates
+           ATRBYT for attribute
+           LOGOPR for logical operator
+Registers: AF
+```
+#### GRPPRT
+```
+Address  : #0089
+Function : Places a character on graphic screen
+Input    : A  - Character
+           ATRBYT for attribute
+           LOGOPR for logical operator
+```
+#### SCALXY
+```
+Address  : #008D
+Function : Clip coordinates (till border of screen)
+Input    : BC - X-position
+           DE - Y-position
+Output   : BC - X-position bordered
+           DE - Y-position bordered
+Registers: AF
+```
+#### MAPXYC
+```
+Address  : #0091
+Function : Converts an X,Y position to an address: and mask in CLOC and CMASK
+Input    : BC - X-position
+           DE - Y-position
+Output   : HL - VRAM address: In SCREEN 3    (in CLOC too)
+           A  - Mask          In SCREEN 3    (in CMASK too)
+           HL - X-position In SCREEN 5->8 (in CLOC too)
+           A  - Y-position In SCREEN 5->8 (in CMASK too)
+Registers: F
+```
+#### READC
+```
+Address  : #0095
+Function : Reads attribute of pixel
+Input    : X-position in CLOC
+           Y-position in CMASK
+Output   : A  - the attribute
+Registers: AF
+```
+#### SETATR
+```
+Address  : #0099
+Function : Set attribute in ATRBYT
+Input    : A  - attribute
+Output   : C-flag set if attribute is wrong
+Registers: F
+```
+#### SETC
+```
+Address  : #009D
+Function : Set attribute of pixel
+Input    : X-position in CLOC
+           Y-position in CMASK
+           Attribute-byte in ATRBYT
+Registers: AF
+```
+#### TRIGHT
+```
+Address  : #00A1
+Function : Moves pixel to the right
+Input    : X-position in CLOC
+           Yposition in CMASK
+Output   : New X-position in CLOC
+           New Y-position in CMASK
+           C-flag set if border of screen is reached
+Registers: AF
+Remark   : SCREEN 3 only
+```
+#### RIGHTC
+```
+Address  : #00A5
+Function : Moves pixel to the right
+Input    : See TRIGHT
+Output   : See TRIGHT (except for the C-flag remark)
+Registers: AF
+Remark   : SCREEN 3 only
+```
+#### TLEFTC
+```
+Address  : #00A9
+Function : Moves pixel to the left
+Input    : See TRIGHT
+Output   : See TRIGHT
+Registers: AF
+```
+#### LEFTC
+```
+Address  : #00AD
+Function : Moves pixel to the left
+Input    : See RIGHTC
+Output   : See RIGHTC
+Registers: AF
+Remark   : SCREEN 3 only
+```
+#### TDOWNC
+```
+Address  : #00B1
+Function : Moves pixel down
+Input    : See TRIGHT
+Output   : See TRIGHT
+Registers: AF
+```
+#### DOWNC
+```
+Address  : #00B5
+Function : Moves pixel down
+Input    : See RIGHTC
+Output   : See RIGHTC
+Registers: AF
+Remark   : SCREEN 3 only
+```
+#### TUPC
+```
+Address  : #00B9
+Function : Moves pixel up
+Input    : See TRIGHT
+Output   : See TRIGHT
+Registers: AF
+```
+#### UPC
+```
+Address  : #00BD
+Function : Moves pixel up
+Input    : See RIGHTC
+Output   : See RIGHTC
+Registers: AF
+Remark   : SCREEN 3 only
+```
+#### SCANR
+```
+Address  : #00C1
+Function : Scans pixels to the right
+Input    : B  - 'Suspend'-flag
+           C  - Border-counting
+Output   : DE - Border-counting
+           C  - 'Pixel-changed'-flag
+Registers: All
+```
+#### SCANL
+```
+Address  : #00C5
+Function : Scans pixels to the left
+Input    : DE - Border-counting
+Output   : DE - Border-counting
+           C  - 'Pixel-changed'-flag
+Registers: All
+```
+#### NVBXLN
+```
+Address  : #00C9
+Function : Draws a box
+Input    : BC - X start-position
+           DE - Y-start-position
+           X end-position in GXPOS
+           Y-end-position in GYPOS
+           Attribute in ATRBYT
+           Logical operator in LOGOPR
+Registers: All
+```
+#### NVBXFL
+```
+Address  : #00CD
+Function : Draws a filled box
+Input    : See NVBXLN
+Registers: All
+```
+
+### Double BIOS calls
+
+The following routines are called from the equally named calls in the MAIN ROM, and therefor the input and results will not be shown, nor will the register changes. For that, refer to the corresponding call in the MSX1-BIOS.
+
+#### CHGMOD
+```
+Address  : #00D1
+Function : Switches to given screenmode
+```
+#### INITXT
+```
+Address  : #00D5
+Function : Switches to SCREEN 0
+```
+#### INIT32
+```
+Address  : #00D9
+Function : Switches to SCREEN 1
+```
+#### INIGRP
+```
+Address  : #00DD
+Function : Switches to SCREEN 2
+```
+#### INIMLT
+```
+Address  : #00E1
+Function : Switches to SCREEN 3
+```
+#### SETTXT
+```
+Address  : #00E5
+Function : Switches VDP in SCREEN 0
+```
+#### SETT32
+```
+Address  : #00E9
+Function : Switches VDP in SCREEN 1
+```
+#### SETGRP
+```
+Address  : #00ED
+Function : Switches VDP in SCREEN 2
+```
+#### SETMLT
+```
+Address  : #00F1
+Function : Switches VDP in SCREEN 3
+```
+#### CLRSPR
+```
+Address  : #00F5
+Function : Initialises sprite tables
+```
+#### CALPAT
+```
+Address  : #00F9
+Function : Returns address of sprite pattern-table
+```
+#### CALATR
+```
+Address  : #00FD
+Function : Returns address of sprite attribute-table
+```
+#### GSPSIZ
+```
+Address  : #0101
+Function : Returns current sprite-size
+```
+
+### MSX 2 specific calls
+
+#### GETPAT
+```
+Address  : #0105
+Function : Returns current pattern of a character
+Input    : A  - ASCII code of character
+Output   : Pattern in PATWRK starting from address #FC40
+Registers: All
+Remark   : Same as routine in MSX1-BIOS, but there is doesn't exist as
+           a BIOS-call
+```
+#### WTRVRM
+```
+Address  : #0109
+Function : Writes data in VRAM (#0000 - #ffff)
+Input    : HL - Address
+           A  - Value
+Registers: AF
+```
+#### RDVRM
+```
+Address  : #010D
+Function : Reads content in VRAM (#0000 - #ffff)
+Input    : HL - Address
+Output   : A  - Read value
+Registers: AF
+```
+#### CHGCLR
+```
+Address  : #0111
+Function : Changes screen colors
+Input    : A  - Screenmode
+           See MSX1BIOS.HTM (CHGCLR)  
+Registers: All
+```
+#### CLS
+```
+Address  : #0115
+Function : Clear screen
+Registers: All
+```
+#### CLRTXT
+```
+Address  : #0119
+Function : Clear Text-screen
+Registers: All
+```
+#### DSPFNK
+```
+Address  : #011D
+Function : Display the function keys
+Registers: All
+```
+#### DELLNO
+```
+Address  : #0121
+Function : Remove line in text screen
+Input    : L  - Line Number
+Registers: All
+```
+#### INSLNO
+```
+Address  : #0125
+Function : Add line to text screen
+Input    : L  - Line Number
+Registers: All
+```
+#### PUTVRM
+```
+Address  : #0129
+Function : Put character on text screen
+Input    : H  - Y-position
+           L  - X-position
+Registers: AF
+```
+#### WRTVDP
+```
+Address  : #012D
+Function : Write to VDP-register
+Input    : B  - Value to write
+           C  - Register number
+Registers: AF, BC
+```
+#### VDPSTA
+```
+Address  : #0131
+Function : Read VDP-status
+Input    : A  - Status register
+Output   : A  - Read value
+Registers: F
+```
+#### KYKLOK
+```
+Address  : #0135
+Function : Control KANA-key and KANA-lamp (Japan)
+Registers: AF
+```
+#### PUTCHR
+```
+Address  : #0139
+Function : Gets a key-code of keyboard, conversion to KANA and in
+           buffer (Japan)
+Input    : Z-flag set if not in conversion mode
+Registers: All
+```
+#### SETPAG
+```
+Address  : #013D
+Function : Switches the page
+Input    : ACPAGE - Active page
+           DPPAGE - display page number
+Registers: AF
+```
+
+### Palette-functions
+
+#### INIPLT
+```
+Address  : #0141
+Function : Initialises the palette (current palet is save in VRAM)
+Registers: AF, BC, DE
+```
+#### RSTPLT
+```
+Address  : #0145
+Function : Restores palette from VRAM
+Registers: AF, BC, DE
+```
+#### GETPLT
+```
+Address  : #0149
+Function : Obtains the colorcodes from the palette
+Input    : A  - Colorcode
+Output   : B  - RRRRBBBB
+           C  - xxxxGGGG
+Registers: AF, DE
+```
+#### SETPLT
+```
+Address  : #014D
+Function : Sets the color code to the palette
+Input    : D  - Colorcode
+           E  - xxxxGGGG
+           A  - RRRRBBBB
+Registers: AF
+```
+#### PUTSPRT (Basic!)
+```
+Address  : #0151
+Function : Set sprites
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### COLOR (Basic!)
+```
+Address  : #0155
+Function : Changes Screen- or spritecolor, or palettevalues
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### SCREEN (Basic!)
+```
+Address  : #0159
+Function : Changes screenmode
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### WIDTHS (Basic!)
+```
+Address  : #015D
+Function : Changes textscreen-width
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### VDP (Basic!)
+```
+Address  : #0161
+Function : Sets VDP-register
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### VDPF (Basic!)
+```
+Address  : #0165
+Function : Reads VDP-register
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### BASE (Basic!)
+```
+Address  : #0169
+Function : Sets VDP base-register
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### BASEF (Basic!)
+```
+Address  : #016D
+Function : Reads VDP base-register
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### VPOKE (Basic!)
+```
+Address  : #0171
+Function : Writes a byte to VRAM
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### VPEEK (Basic!)
+```
+Address  : #0175
+Function : Reads a byte from VRAM
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### SETS (Basic!)
+```
+Address  : #0179
+Function : Sets BEEP, ADJUST, TIME and DATE
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### BEEP
+```
+Address  : #017D
+Function : Generates beep
+Registers: All
+```
+#### PROMPT
+```
+Address  : #0181
+Function : Shows prompt (default: “Ok”)
+Registers: All
+```
+#### SDFSCR
+```
+Address  : #0185
+Function : Recovers screen-parameters of clock-chip. When C-flag is set
+           function-key text will be displayd
+Input    : C-flag reset after MSX-DOS call
+Registers: All
+```
+#### SETSCR
+```
+Address  : #0189
+Function : Recovers screen-parameter and prints Welcome message
+Registers: All
+```
+#### SCOPY (Basic!)
+```
+Address  : #018D
+Function : Copy's VRAM, array and disk-file
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+
+### BIT-BLIT routines
+
+From here on the so-called BIT-BLIT routines are listed, which are mostly executed by the VDP. The parameters must be passed through the system RAM at #F562. See the MSX 2 system variables documentation for more details. HL must always contain the value #F562 when calling.
+
+#### BLTVV
+```
+Address  : #0191
+Function : Copy VRAM to VRAM
+Input    : SX, SY, DX, DY, NX, NY, ARG, L\_OP
+Registers: All
+```
+#### BLTVM
+```
+Address  : #0195
+Function : Copy Main-RAM to VRAM
+Input    : SX - Address of screendata in RAM
+           DX, DY, ARG, L\_OP. NX and NY must be in screendata
+Output   : C-flag set if data failure in RAM
+Registers: All
+```
+#### BLTMV
+```
+Address  : #0199
+Function : Copy VRAM to Main-RAM
+Input    : DX - Address of screendata in RAM
+           SX, SY, ARG, L\_OP. NX and NY must be in screendata
+Registers: All
+```
+#### BLTVD
+```
+Address  : #019D
+Function : Copy Diskfile to VRAM
+Input    : SX -Address of filename.
+           SX, SY, ARG, L\_OP. NX and NY must be in diskfile
+Registers: All
+```
+#### BLTDV
+```
+Address  : #01A1
+Function : Copy VRAM to Diskfile
+Input    : DX - Address of filenaam.
+           SX, SY, NX, NY,ARG
+Registers: All
+```
+#### BLTMD
+```
+Address  : #01A5
+Function : Copy Diskfile to Main-RAM
+Input    : SX - Address of filenaam.
+           DX - start-address
+           DY - end-address (in Main-RAM)
+Registers: All
+```
+#### BLTDM
+```
+Address  : #01A9
+Function : Copy Main-RAM to Diskfile
+Input    : DX - Address of filenaam.
+           SX - start-address
+           SY - end-address  (in Main-RAM)
+Registers: All
+```
+#### NEWPAD
+```
+Address  : #01AD
+Function : Read light pen, mouse and trackball
+Input    : A  - Function call number. Fetch device data first, then read.
+
+           [ 8]   Fetch light pen (#FF if available; touching screen)
+           [ 9]   Read X-position
+           [10]   Read Y-position
+           [11]   Read lightpen-status (#FF if pressed)
+
+           [12]   Fetch mouse/trackball in port 1
+           [13]   Read X-offset
+           [14]   Read Y-offset
+           [15]   No function (always #00)
+
+           [16]   Fetch mouse/trackball in port 2
+           [17]   Read X-offset
+           [18]   Read Y-offset
+           [19]   No function (always #00)
+
+           [20]   Fetch 2nd light pen (#FF if available; touching screen)
+           [21]   Read X-position
+           [22]   Read Y-position
+           [23]   Read light-pen status (#FF if pressed)
+
+Output   : A  - Read value
+Registers: All
+Remark   : Access via [GTPAD](msxbios.php#GTPAD) in the main BIOS, function call numbers 8 and up
+           will be forwarded to this call.
+```
+#### GETPUT (Basic!)
+```
+Address  : #01B1
+Function : GET TIME, GET DATE and PUT KANJI
+Input    : HL - Basic textpointer
+Output   : HL - Adapted Basic textpointer
+Registers: All
+```
+#### CHGMDP
+```
+Address  : #01B5
+Function : sets SCREEN-mode
+Input    : A  - SCREEN-mode
+Registers: All
+```
+#### RESVI
+```
+Address  : #01B9
+Function : Not used... Reserve entry
+```
+#### KNJPRT
+```
+Address  : #01BD
+Function : Puts Kanji-character on graphical screen (5-8)
+Input    : BC - JIS Kanji-character code
+           A  - Display-mode (0=full, 1=even, 2=odd)
+Registers: AF
+```
+#### REDCLK
+```
+Address  : #01F5
+Function : Read clock-RAM
+Input    : C  - clock-RAM address
+                xxBBAAAA
+                  ||++++-- address
+                  ++------ Block-number
+Output   : A  - Read value in lowest four bits
+Registers: F
+```
+#### WRTCLK
+```
+Address  : #01F9
+Function : Write clock-RAM
+Input    : C  - clock-RAM address
+                xxBBAAAA
+                  ||++++-- address  :
+                  ++------ Block-number
+           A  - Value to write
+Registers: F
+```
+
+~BiFi
+
+© 2025 MSX Assembly Page. MSX is a trademark of MSX Licensing Corporation.