@metamesh/modeling 0.17.0 → 0.18.0

package/dist/docs/reference/geometry/preflightThreadedNut.md

@@ -11,16 +11,14 @@ host execution. It resolves body/cutter dimensions without mesh buffers or nativ
 `thread` contains conservative cutter estimates, excluding the body and Boolean result.
 Successful preflight leaves mesh validity, native construction, and manufacturing fit to later checks.
 
+See `mesh.preflightThreadSolid` for standalone mesh estimates.
+
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`ThreadedNutOptions`](ThreadedNutOptions.md) · Required
 
-- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
-
-  Validated periodic profile repeated around the shaft.
-
 - [`nominalMajorDiameter`](ThreadedNutOptions.md#nominalmajordiameter) · `number` · Required
 
   Nominal major diameter before female compensation and faceting correction.
@@ -37,6 +35,27 @@ Successful preflight leaves mesh validity, native construction, and manufacturin
 
   Across-flats width for hex/square or diameter for round, in millimetres.
 
+- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
+
+  Validated periodic profile repeated around the shaft.
+
+- [`fit`](ThreadedNutOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
+
+  Printable fit or caller-calibrated allowances. Default: `normal`.
+
+- [`innerBevel`](ThreadedNutOptions.md#innerbevel) · [`Bevel`](Bevel.md) · Optional
+
+  Opening bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4); zero disables.
+
+- [`outerBevel`](ThreadedNutOptions.md#outerbevel) · [`Bevel`](Bevel.md) · Optional
+
+  Body bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4).
+  Use [0, "auto"] to keep the outside bottom flat without disabling its inner opening bevel.
+
+- [`bodyResolution`](ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+
+  Optional physical policy for a round body, independent of the thread's matched facet grid.
+
 - [`ends`](ThreadedNutOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
 
   Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
@@ -66,26 +85,6 @@ Successful preflight leaves mesh validity, native construction, and manufacturin
 
   Optional numerical tolerance overrides.
 
-- [`fit`](ThreadedNutOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
-- [`bevel`](ThreadedNutOptions.md#bevel) · [`ThreadedNutBevel`](ThreadedNutBevel.md) · Optional
-
-  Nut body bevel selection. Default: `automatic`.
-
-- [`bodyResolution`](ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
-
-  Optional physical policy for a round body, independent of the thread's matched facet grid.
-
-- [`chamferSize`](ThreadedNutOptions.md#chamfersize) · `number` · Optional
-
-  45-degree body chamfer extent. Default: `min(profile.depth, thickness/4)`.
-
-- [`flushBuildPlateBottom`](ThreadedNutOptions.md#flushbuildplatebottom) · `boolean` · Optional
-
-  Leave the bottom outside edge flat for build-plate adhesion. Default: `false`.
-
 
 
 ## Returns
@@ -97,10 +96,9 @@ Successful preflight leaves mesh validity, native construction, and manufacturin
 
 - [ThreadedNutOptions](ThreadedNutOptions.md)
 - [ThreadedNutPreflight](ThreadedNutPreflight.md)
-- [preflightHelicalThreadSolidMesh](preflightHelicalThreadSolidMesh.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/preflightThreadedRod.md

@@ -2,7 +2,7 @@
 
 Resolves compensated rod dimensions and checks conservative mesh estimates against output limits.
 
-**preflightThreadedRod**(`options`: [`ThreadedRodOptions`](ThreadedRodOptions.md)): [`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+**preflightThreadedRod**(`options`: [`ThreadedRodOptions`](ThreadedRodOptions.md)): [`ThreadSolidPreflight`](ThreadSolidPreflight.md)
 
 
 
@@ -10,12 +10,19 @@ This pure operation uses explicit resolution and limits or package defaults, wit
 host execution. It creates planning data without mesh buffers or native objects; returned row
 and triangle counts are estimates. Mesh validity and native construction are checked later.
 
+See `mesh.preflightThreadSolid` for standalone mesh estimates.
+See `mesh.threadSolid` for standalone mesh construction.
+
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`ThreadedRodOptions`](ThreadedRodOptions.md) · Required
 
+- [`nominalMajorDiameter`](ThreadedRodOptions.md#nominalmajordiameter) · `number` · Required
+
+  Nominal major diameter before male compensation.
+
 - [`length`](ThreadedRodOptions.md#length) · `number` · Required
 
   Total threaded axial length in millimetres.
@@ -24,9 +31,14 @@ and triangle counts are estimates. Mesh validity and native construction are che
 
   Validated periodic profile repeated around the shaft.
 
-- [`nominalMajorDiameter`](ThreadedRodOptions.md#nominalmajordiameter) · `number` · Required
+- [`bevel`](ThreadedRodOptions.md#bevel) · [`Bevel`](Bevel.md) · Optional
 
-  Nominal major diameter before male compensation.
+  Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
+  or one sixth of the compensated male minor/female major radius for blunt ends.
+
+- [`fit`](ThreadedRodOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
+
+  Printable fit or caller-calibrated allowances. Default: `normal`.
 
 - [`ends`](ThreadedRodOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
 
@@ -57,39 +69,20 @@ and triangle counts are estimates. Mesh validity and native construction are che
 
   Optional numerical tolerance overrides.
 
-- [`bevelBottom`](ThreadedRodOptions.md#bevelbottom) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=0.
-
-- [`bevelSize`](ThreadedRodOptions.md#bevelsize) · `number` · Optional
-
-  Axial bevel extent in millimetres. Active blunt ends default to one sixth of the compensated
-  male minor radius or female major radius; other ends default to the profile depth.
-
-- [`bevelTop`](ThreadedRodOptions.md#beveltop) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=length.
-
-- [`fit`](ThreadedRodOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
 
 
 ## Returns
 
-[`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+[`ThreadSolidPreflight`](ThreadSolidPreflight.md)
 
 
 ## Related APIs
 
-- [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 - [ThreadedRodOptions](ThreadedRodOptions.md)
-- [helicalThreadSolidMesh](helicalThreadSolidMesh.md)
-- [preflightHelicalThreadSolidMesh](preflightHelicalThreadSolidMesh.md)
+- [ThreadSolidPreflight](ThreadSolidPreflight.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/projectOntoPlane3.md

@@ -34,4 +34,4 @@ Removes the component parallel to a normalized plane normal.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/radialPatternTransforms.md

@@ -28,4 +28,4 @@ readonly [`Transform3Data`](Transform3Data.md)[]
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/rectangleContour.md

@@ -1,6 +1,6 @@
 # rectangleContour
 
-Creates an immutable sampled CCW rectangle boundary. Round radius zero is square; tangent saturated endpoints occur once.
+Creates an immutable sampled CCW rectangle boundary.
 
 **rectangleContour**(`options`: [`RectangleContourOptions`](RectangleContourOptions.md)): [`Contour`](Contour.md)
 
@@ -12,15 +12,13 @@ Creates an immutable sampled CCW rectangle boundary. Round radius zero is square
 rectangleContour({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
 ```
 
-Use [rectangle](../model/rectangle.md) for a filled Section.
-
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`RectangleContourOptions`](RectangleContourOptions.md) · Required
 
-- [`size`](RectangleContourOptions.md#size) · `number` \| [`Vector2Data`](Vector2Data.md) · Required
+- [`size`](RectangleContourOptions.md#size) · `number` \| [`Vector2Input`](Vector2Input.md) · Required
 
   Positive uniform size or explicit XY extents in millimetres.
 
@@ -42,6 +40,13 @@ Use [rectangle](../model/rectangle.md) for a filled Section.
 
 [`Contour`](Contour.md)
 
+## Remarks
+
+A zero round radius leaves square corners. When rounded corners meet, their shared endpoints
+appear once.
+
+Use [rectangle](../model/rectangle.md) for a filled Section.
+
 
 ## Related APIs
 
@@ -53,4 +58,4 @@ Use [rectangle](../model/rectangle.md) for a filled Section.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/rectangleProfile.md

@@ -20,7 +20,7 @@ Use [rectangle](../model/rectangle.md) for a filled Section.
 
 **`options`** · [`RectangleProfileOptions`](RectangleProfileOptions.md) · Required
 
-- [`size`](RectangleProfileOptions.md#size) · `number` \| [`Vector2Data`](Vector2Data.md) · Required
+- [`size`](RectangleProfileOptions.md#size) · `number` \| [`Vector2Input`](Vector2Input.md) · Required
 
   Positive uniform size or explicit XY extents in millimetres.
 
@@ -58,4 +58,4 @@ Use [rectangle](../model/rectangle.md) for a filled Section.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/regionArea.md

@@ -35,4 +35,4 @@ Total filled area in square millimetres.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/regionBounds.md

@@ -28,4 +28,4 @@ Returns finite axis-aligned bounds for a non-empty region.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/regularPolygonContour.md

@@ -1,6 +1,6 @@
 # regularPolygonContour
 
-Creates a centered CCW point loop with vertex or face radial sizing and an implicit seam.
+Creates an immutable centered CCW point loop with vertex or face radial sizing and an implicit seam.
 
 `const` **regularPolygonContour**: (`options`: [`RegularPolygonContourOptions`](RegularPolygonContourOptions.md)) => readonly [`Vector2Data`](Vector2Data.md)[]
 
@@ -54,4 +54,4 @@ readonly [`Vector2Data`](Vector2Data.md)[]
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resamplePolyline2.md

@@ -65,4 +65,4 @@ Only final 2D output vectors are copied and frozen. No immutable 3D intermediate
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resamplePolyline3.md

@@ -68,4 +68,4 @@ may bridge original corners. Sampling never silently lowers the requested detail
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveAlignedCircularSegments.md

@@ -80,4 +80,4 @@ An aligned full-circle segment count.
 - [AlignedCircularSegmentsOptions](AlignedCircularSegmentsOptions.md)
 - [resolveCircularSegments](resolveCircularSegments.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveArcSegments.md

@@ -64,4 +64,4 @@ Segment count for the requested arc span.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [resolveCircularSegments](resolveCircularSegments.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveCircularSampling.md

@@ -37,4 +37,4 @@ exhausted limits rather than coarsening. The returned record is immutable and ne
 - [CircleContourOptions](CircleContourOptions.md)
 - [CircularSampling](CircularSampling.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveCircularSegments.md

@@ -59,4 +59,4 @@ Full-circle segment count.
 - [resolveAlignedCircularSegments](resolveAlignedCircularSegments.md)
 - [resolveArcSegments](resolveArcSegments.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveCylindricalGear.md

@@ -32,4 +32,4 @@ currently supported.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveCylindricalGearPair.md

@@ -32,4 +32,4 @@ the same hand. The function validates those conjugate pitch invariants.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveExtrusionDivisions.md

@@ -75,4 +75,4 @@ Number of intermediate copies, excluding the two end profiles.
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveGeometrySamplingLimits.md

@@ -27,4 +27,4 @@ Resolves finite positive safe-integer allocation ceilings without ambient state.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveGeometryTolerance.md

@@ -56,4 +56,4 @@ A complete tolerance policy including the scale-resolved distance.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ResolvedGeometryTolerance](ResolvedGeometryTolerance.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveKnuckleHinge.md

@@ -56,4 +56,4 @@ Manufacturing minima, strength, mounting, retention, handedness, and motion rema
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolvePrintableThreadFitPolicy.md

@@ -28,4 +28,4 @@ Resolves and validates a named or caller-defined print-fit policy.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveRackPitch.md

@@ -28,4 +28,4 @@ Resolves a rack segment that is conjugate with the same normal cylindrical pitch
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveThreadCircularSegments.md

@@ -60,4 +60,4 @@ raised. Adaptive policies align upward and fail if that would exceed `maxSegment
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/rotate2.md

@@ -34,4 +34,4 @@ Rotates a finite vector counter-clockwise in XY by `degrees` about the origin. T
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/rotationTransform3.md

@@ -51,4 +51,4 @@ A frozen row-major transform.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/roundClosedPolylinePath.md

@@ -53,4 +53,4 @@ readonly [`Vector3Data`](Vector3Data.md)[]
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleContour.md

@@ -84,4 +84,4 @@ Frozen counterclockwise loop in millimetres, without a repeated seam endpoint.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleCurve2.md

@@ -61,4 +61,4 @@ Returned planar points and tangents are copied and frozen. At stationary tangent
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleCurve3.md

@@ -62,4 +62,4 @@ bound the full control hull. Full-circle arcs repeat their endpoint; closed poly
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleCylindricalGearOutline.md

@@ -59,4 +59,4 @@ seam point, and contains no holes. Its center is the origin and its axis is
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleHelix.md

@@ -46,4 +46,4 @@ readonly [`Vector3Data`](Vector3Data.md)[]
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleInternalCylindricalGearSpaceOutline.md

@@ -60,4 +60,4 @@ when used as a region hole.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleRackToothPath.md

@@ -40,4 +40,4 @@ readonly [`Vector2Data`](Vector2Data.md)[]
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleSideProfile.md

@@ -80,4 +80,4 @@ Frozen open polyline in millimetres, ordered from lowest to highest anchor.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleTextContours.md

@@ -54,4 +54,4 @@ Frozen contours with original glyph winding and no repeated closing vertex.
 
 - [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleThreadHelices.md

@@ -64,4 +64,4 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/scale2.md

@@ -34,4 +34,4 @@ Multiplies a vector by a dimensionless scalar.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/scale3.md

@@ -40,4 +40,4 @@ scale3([1, 2, 3], 2); // [2, 4, 6]
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/scaleTransform3.md

@@ -36,4 +36,4 @@ A frozen row-major transform.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/signedContourArea.md

@@ -27,4 +27,4 @@ Returns the signed area of a non-duplicated loop; positive means CCW.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/starContour.md

@@ -1,40 +1,42 @@
 # starContour
 
-Creates a centered CCW alternating-radius star within the selected profile sampling ceiling.
+Creates an immutable centered CCW alternating-radius star within the selected profile sampling ceiling.
 
-`const` **starContour**: (`outerRadius`: `number`, `points`: `number`, `innerRadius?`: `number`, `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>) => readonly [`Vector2Data`](Vector2Data.md)[]
+`const` **starContour**: (`options`: [`StarContourOptions`](StarContourOptions.md)) => readonly [`Vector2Data`](Vector2Data.md)[]
 
 
 
 ## Example: Five-point outline
 
 ```ts
-starContour(12, 5, 6);
+starContour({ outerRadius: 12, innerRadius: 6, points: 5 });
 ```
 
 ## Parameters
 
-<a id="outerradius"></a>
+<a id="options"></a>
 
-**`outerRadius`** · `number` · Required
+**`options`** · [`StarContourOptions`](StarContourOptions.md) · Required
 
+- [`outerRadius`](StarContourOptions.md#outerradius) · `number` · Required
 
+  Positive outer vertex radius in millimetres.
 
-<a id="points"></a>
+- [`innerRadius`](StarContourOptions.md#innerradius) · `number` · Required
 
-**`points`** · `number` · Required
+  Positive inner vertex radius in millimetres, smaller than the outer radius.
 
+- [`points`](StarContourOptions.md#points) · `number` · Required
 
+  Integer outer point count, at least three; output contains twice as many vertices.
 
-<a id="innerradius"></a>
+- [`rotation`](StarContourOptions.md#rotation) · `number` · Optional
 
-**`innerRadius`** · `number` · Optional
+  Counterclockwise rotation in degrees; defaults to zero with an outer vertex on +X.
 
+- [`limits`](StarContourOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
 
-
-<a id="limits"></a>
-
-**`limits`** · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+  Explicit sampling ceilings, bounded by the host policy during modeling.
 
 
 
@@ -45,11 +47,11 @@ readonly [`Vector2Data`](Vector2Data.md)[]
 
 ## Related APIs
 
-- [GeometrySamplingLimits](GeometrySamplingLimits.md)
+- [StarContourOptions](StarContourOptions.md)
 - [Vector2Data](Vector2Data.md)
 
 ## Guides
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/strokeRegionData.md

@@ -64,4 +64,4 @@ intersection, falling back to bevels above SVG's default miter limit of 4.
 
 - [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/subtract2.md

@@ -34,4 +34,4 @@ Subtracts `b` from `a` component-wise.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/subtract3.md

@@ -40,4 +40,4 @@ subtract3([4, 5, 6], [1, 2, 3]); // [3, 3, 3]
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/threadProfile.md

@@ -38,4 +38,4 @@ non-decreasing, periodic at their endpoints, and reach radial zero.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/transform2.md

@@ -42,4 +42,4 @@ Use `toData()` for frozen matrix interchange.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/transform3.md

@@ -44,4 +44,4 @@ Use `toData()` for frozen matrix interchange.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.