@metamesh/modeling 0.17.0 → 0.18.0

package/dist/docs/reference/geometry/ArcCurve2.md

@@ -71,4 +71,4 @@ Nonzero signed sweep in degrees, bounded to one complete turn.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ArcCurve3.md

@@ -95,4 +95,4 @@ Nonzero signed sweep in degrees, bounded to one complete turn.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/AttachOptions.md

@@ -65,4 +65,4 @@ Optional numeric comparison overrides.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/AxisAngleRotation3.md

@@ -64,4 +64,4 @@ Excluded when the angle is expressed in radians.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bevel.md

@@ -0,0 +1,18 @@
+# Bevel
+
+One size for both ends, or independent sizes in bottom/top order. Zero disables an end.
+
+**Bevel** = [`BevelSize`](BevelSize.md) \| readonly \[`bottom`: [`BevelSize`](BevelSize.md), `top`: [`BevelSize`](BevelSize.md)\]
+
+
+
+
+## Related APIs
+
+- [BevelSize](BevelSize.md)
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BevelSize.md

@@ -0,0 +1,14 @@
+# BevelSize
+
+Nonnegative 45-degree axial/radial bevel size in millimetres, or factory automatic sizing.
+
+**BevelSize** = `number` \| `"auto"`
+
+
+
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bounds2-type.md

@@ -124,4 +124,4 @@ Returns this value's frozen plain record; repeated calls do not allocate.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bounds2Data.md

@@ -42,4 +42,4 @@ Inclusive minimum X/Y coordinates.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bounds2Input.md

@@ -18,4 +18,4 @@ An immutable XY bounds value or its plain min/max representation.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bounds2Options.md

@@ -2,25 +2,67 @@
 
 XY bounds construction from existing extrema or nonnegative dimensions, never both.
 
-**Bounds2Options** = [`Bounds2Input`](Bounds2Input.md) & `object` \| \{ `size`: [`Vector2Data`](Vector2Data.md); `center?`: `boolean`; `min?`: `never`; `max?`: `never`; \}
+**Bounds2Options** = \{ `min`: [`Vector2Input`](Vector2Input.md); `max`: [`Vector2Input`](Vector2Input.md); `size?`: `never`; `center?`: `never`; \} \| \{ `size`: [`Vector2Input`](Vector2Input.md); `center?`: `boolean`; `min?`: `never`; `max?`: `never`; \}
 
 
 
 ## Union Members
 
-[`Bounds2Input`](Bounds2Input.md) & `object`
+### Type Literal
+
+\{ `min`: [`Vector2Input`](Vector2Input.md); `max`: [`Vector2Input`](Vector2Input.md); `size?`: `never`; `center?`: `never`; \}
+
+#### min
+
+
+
+`readonly` **min**: [`Vector2Input`](Vector2Input.md)
+
+
+
+Inclusive minimum XY coordinates in millimetres.
+
+#### max
+
+
+
+`readonly` **max**: [`Vector2Input`](Vector2Input.md)
+
+
+
+Inclusive maximum XY coordinates in millimetres.
+
+#### size?
+
+
+
+`readonly` `optional` **size?**: `never`
+
+
+
+Size construction cannot be combined with extrema.
+
+#### center?
+
+
+
+`readonly` `optional` **center?**: `never`
+
+
+
+Center applies only to size construction.
 
 ***
 
 ### Type Literal
 
-\{ `size`: [`Vector2Data`](Vector2Data.md); `center?`: `boolean`; `min?`: `never`; `max?`: `never`; \}
+\{ `size`: [`Vector2Input`](Vector2Input.md); `center?`: `boolean`; `min?`: `never`; `max?`: `never`; \}
 
 #### size
 
 
 
-`readonly` **size**: [`Vector2Data`](Vector2Data.md)
+`readonly` **size**: [`Vector2Input`](Vector2Input.md)
 
 
 
@@ -59,9 +101,7 @@ Maximum coordinates are unavailable when size is supplied.
 
 ## Related APIs
 
-- [Bounds2](Bounds2-type.md)
-- [Bounds2Input](Bounds2Input.md)
-- [Vector2Data](Vector2Data.md)
+- [Vector2Input](Vector2Input.md)
 
 ## Guides
 
@@ -69,4 +109,4 @@ Maximum coordinates are unavailable when size is supplied.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bounds3-type.md

@@ -124,4 +124,4 @@ Returns this value's frozen plain record; repeated calls do not allocate.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bounds3Data.md

@@ -42,4 +42,4 @@ Inclusive minimum X/Y/Z coordinates.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bounds3Input.md

@@ -18,4 +18,4 @@ An immutable XYZ bounds value or its plain min/max representation.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Bounds3Options.md

@@ -2,25 +2,67 @@
 
 XYZ bounds construction from existing extrema or nonnegative dimensions, never both.
 
-**Bounds3Options** = [`Bounds3Input`](Bounds3Input.md) & `object` \| \{ `size`: [`Vector3Data`](Vector3Data.md); `center?`: `boolean`; `min?`: `never`; `max?`: `never`; \}
+**Bounds3Options** = \{ `min`: [`Vector3Input`](Vector3Input.md); `max`: [`Vector3Input`](Vector3Input.md); `size?`: `never`; `center?`: `never`; \} \| \{ `size`: [`Vector3Input`](Vector3Input.md); `center?`: `boolean`; `min?`: `never`; `max?`: `never`; \}
 
 
 
 ## Union Members
 
-[`Bounds3Input`](Bounds3Input.md) & `object`
+### Type Literal
+
+\{ `min`: [`Vector3Input`](Vector3Input.md); `max`: [`Vector3Input`](Vector3Input.md); `size?`: `never`; `center?`: `never`; \}
+
+#### min
+
+
+
+`readonly` **min**: [`Vector3Input`](Vector3Input.md)
+
+
+
+Inclusive minimum XYZ coordinates in millimetres.
+
+#### max
+
+
+
+`readonly` **max**: [`Vector3Input`](Vector3Input.md)
+
+
+
+Inclusive maximum XYZ coordinates in millimetres.
+
+#### size?
+
+
+
+`readonly` `optional` **size?**: `never`
+
+
+
+Size construction cannot be combined with extrema.
+
+#### center?
+
+
+
+`readonly` `optional` **center?**: `never`
+
+
+
+Center applies only to size construction.
 
 ***
 
 ### Type Literal
 
-\{ `size`: [`Vector3Data`](Vector3Data.md); `center?`: `boolean`; `min?`: `never`; `max?`: `never`; \}
+\{ `size`: [`Vector3Input`](Vector3Input.md); `center?`: `boolean`; `min?`: `never`; `max?`: `never`; \}
 
 #### size
 
 
 
-`readonly` **size**: [`Vector3Data`](Vector3Data.md)
+`readonly` **size**: [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -59,9 +101,7 @@ Maximum coordinates are unavailable when size is supplied.
 
 ## Related APIs
 
-- [Bounds3](Bounds3-type.md)
-- [Bounds3Input](Bounds3Input.md)
-- [Vector3Data](Vector3Data.md)
+- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
@@ -69,4 +109,4 @@ Maximum coordinates are unavailable when size is supplied.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoundsFit2.md

@@ -50,4 +50,4 @@ Bounds after scaling and translation.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoundsFit3.md

@@ -50,4 +50,4 @@ Bounds after scaling and translation.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoundsFitOptions.md

@@ -21,4 +21,4 @@ Positive upper scale limit; use 1 to prevent enlargement. Omitted permits enlarg
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoxAnchorFace.md

@@ -12,4 +12,4 @@ Named face on an axis-aligned box.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoxAnchorOptions.md

@@ -8,7 +8,7 @@ Box dimensions and construction origin for one named face anchor.
 
 
 
-`readonly` **size**: `number` \| [`Vector3Data`](Vector3Data.md)
+`readonly` **size**: `number` \| [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -44,7 +44,7 @@ Centers the box around its construction origin; defaults to true, matching box()
 
 
 
-`readonly` `optional` **origin?**: [`Vector3Data`](Vector3Data.md)
+`readonly` `optional` **origin?**: [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -54,11 +54,11 @@ Construction origin; centered-box center or noncentered minimum corner. Defaults
 ## Related APIs
 
 - [BoxAnchorFace](BoxAnchorFace.md)
-- [Vector3Data](Vector3Data.md)
+- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoxEdge.md

@@ -4,4 +4,4 @@ Box edges use +Z top, +Y front and +X right; vertical names list front/back firs
 
 **BoxEdge** = `"top-front"` \| `"top-back"` \| `"top-left"` \| `"top-right"` \| `"bottom-front"` \| `"bottom-back"` \| `"bottom-left"` \| `"bottom-right"` \| `"front-left"` \| `"front-right"` \| `"back-left"` \| `"back-right"`
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoxEdgeSelection.md

@@ -11,4 +11,4 @@ Named individual edges or top/bottom rims and all four vertical edges.
 
 - [BoxEdge](BoxEdge.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoxEdgeTreatments.md

@@ -12,4 +12,4 @@ Independent treatments for disjoint named edge selections; overlapping selection
 - [BoxEdgeSelection](BoxEdgeSelection.md)
 - [EdgeTreatment](EdgeTreatment.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/BoxOptions.md

@@ -40,7 +40,7 @@ Centers the box on the XYZ origin when `true`; otherwise its minimum corner is a
 
 
 
-`readonly` **size**: `number` \| [`Vector3Data`](Vector3Data.md)
+`readonly` **size**: `number` \| [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -82,6 +82,6 @@ Applied after local construction; Section attachment must preserve the XY plane.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [PrimitiveAttachment](PrimitiveAttachment.md)
 - [PrimitiveAttachmentOptions](PrimitiveAttachmentOptions.md)
-- [Vector3Data](Vector3Data.md)
+- [Vector3Input](Vector3Input.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ButtressPressureFlankSide.md

@@ -11,4 +11,4 @@ Axial side carrying the near-normal pressure flank of a buttress thread.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ButtressThreadProfileSpec.md

@@ -94,4 +94,4 @@ Optional numerical tolerance overrides.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ChamferedEdgeTreatment.md

@@ -26,4 +26,4 @@ Selects a straight bevel between adjoining surfaces.
 
 Millimetre setbacks, equal or [first surface, second surface]. Zero or [0, 0] leaves the edge untreated; otherwise both must be positive and fit without overlap.
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CircleContourOptions.md

@@ -16,4 +16,4 @@ Circular profile dimensions with exactly one radius or diameter and explicit sam
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CircularPrimitiveOptions.md

@@ -6,7 +6,6 @@ Tessellation controls shared by circular primitives across Geometry entry points
 
 - [`RevolveOptions`](RevolveOptions.md)
 - [`RoundedEdgeTreatment`](RoundedEdgeTreatment.md)
-- [`TubeOptions`](TubeOptions.md)
 
 ## Properties
 
@@ -54,6 +53,5 @@ Operation-level physical tessellation policy over the active model-wide policy.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [RevolveOptions](RevolveOptions.md)
 - [RoundedEdgeTreatment](RoundedEdgeTreatment.md)
-- [TubeOptions](TubeOptions.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CircularResolutionOptions.md

@@ -104,4 +104,4 @@ Lower full-circle segment count; defaults to 16 or a lower selected circular cei
 - [GeometryResolution](GeometryResolution.md)
 - [RadialSizing](RadialSizing.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CircularSampling.md

@@ -38,4 +38,4 @@ Distance from the origin to every sampled vertex.
 
 Minimum distance from the origin to each straight sampled edge.
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CircularSamplingOptions.md

@@ -11,4 +11,4 @@ Nominal circle size and explicit physical sampling; supply exactly one radius or
 
 - [CircleContourOptions](CircleContourOptions.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ClearanceHoleDimensions.md

@@ -43,4 +43,4 @@ Normal-fit clearance-hole diameter.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ClearanceHoleFit.md

@@ -11,4 +11,4 @@ Common clearance-hole fit categories, ordered from smallest to largest.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CompensatedThreadDiameters.md

@@ -55,4 +55,4 @@ Signed radial shift: negative for male inset, positive for female outset.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Contour.md

@@ -20,4 +20,4 @@ Use PolygonData to assign an exterior and its holes, or ProfileContour2 for iden
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ContourCurve.md

@@ -36,4 +36,4 @@ Ordered chain of 2–32 segments; the final end must exactly match start.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ContourPoint.md

@@ -31,4 +31,4 @@ Upward planar coordinate.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ContourSegment.md

@@ -87,4 +87,4 @@ Next anchor; the final anchor repeats the curve start.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CorrespondingComponent.md

@@ -47,4 +47,4 @@ Clockwise hole contours belonging to this component.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CorrespondingContour.md

@@ -47,4 +47,4 @@ One span identity per point; indices correspond between every matched family mem
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CorrespondingProfile.md

@@ -23,4 +23,4 @@ Ordered components with explicit contour identities.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CorrespondingProfileStation.md

@@ -28,4 +28,4 @@ Already corresponding filled contours with authoritative landmark slots.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CubicBezierCurve2.md

@@ -71,4 +71,4 @@ Final XY point in millimetres.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CubicBezierCurve3.md

@@ -71,4 +71,4 @@ Final XYZ point in millimetres.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Curve2.md

@@ -17,4 +17,4 @@ Reusable planar curve definition.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Curve3.md

@@ -17,4 +17,4 @@ Reusable spatial curve definition.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CurveSamplingOptions.md

@@ -67,4 +67,4 @@ Explicit sampling ceilings; omitted values use package defaults without ambient
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CustomThreadProfileSpec.md

@@ -74,4 +74,4 @@ Optional numerical tolerance overrides.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CylinderAnchorFace.md

@@ -12,4 +12,4 @@ Named face on a cylinder parallel to +Z.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CylinderAnchorOptions.md

@@ -68,7 +68,7 @@ Centers the cylinder along Z; defaults to true, matching cylinder().
 
 
 
-`readonly` `optional` **origin?**: [`Vector3Data`](Vector3Data.md)
+`readonly` `optional` **origin?**: [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -78,11 +78,11 @@ Construction origin; centered-axis midpoint or noncentered bottom axis. Defaults
 ## Related APIs
 
 - [CylinderAnchorFace](CylinderAnchorFace.md)
-- [Vector3Data](Vector3Data.md)
+- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CylinderOptions.md

@@ -50,4 +50,4 @@ Total height along +Z in millimetres.
 - [PrimitiveAttachment](PrimitiveAttachment.md)
 - [RadialSizingOptions](RadialSizingOptions.md)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CylindricalGearDimensions.md

@@ -211,4 +211,4 @@ Helical equivalent spur tooth count, `toothCount / cos³(helixAngle)`.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/CylindricalGearMeshKind.md

@@ -11,4 +11,4 @@ Whether two cylindrical gears mesh on their outside teeth or as a pinion inside
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.18.0`.