npm - @metamesh/modeling - Versions diffs - 0.14.0 → 0.15.0 - Mend

@metamesh/modeling 0.14.0 → 0.15.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (716) hide show

package/dist/docs/reference/geometry/resamplePolyline2.md CHANGED Viewed

@@ -28,7 +28,7 @@ const loop = resamplePolyline2([[0,0],[5,0],[5,5],[0,5]], {closed: true, segment
   Millimetre sampling policy; circularSegments applies only to arcs.
-- [`maximumVertices`](PolylineResamplingOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](PolylineResamplingOptions.md#maxvertices) · `number` · Optional
   Output vertex ceiling of at least two; may only lower limits.maxPathPoints.
@@ -61,4 +61,4 @@ Only final 2D output vectors are copied and frozen. No immutable 3D intermediate
 - [SampledCurve2](SampledCurve2.md)
 - [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resamplePolyline3.md CHANGED Viewed

@@ -28,7 +28,7 @@ const path = resamplePolyline3([[0,0,0],[10,0,0],[10,10,0]], {segments: 8});
   Millimetre sampling policy; circularSegments applies only to arcs.
-- [`maximumVertices`](PolylineResamplingOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](PolylineResamplingOptions.md#maxvertices) · `number` · Optional
   Output vertex ceiling of at least two; may only lower limits.maxPathPoints.
@@ -64,4 +64,4 @@ may bridge original corners. Sampling never silently lowers the requested detail
 - [SampledCurve3](SampledCurve3.md)
 - [Vector3Tuple](Vector3Tuple.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveAlignedCircularSegments.md CHANGED Viewed

@@ -15,7 +15,7 @@ const alignedSegments = resolveAlignedCircularSegments(20, { alignTo: [4, 6] });
 `alignTo` must be non-empty and contain only positive safe integers. Its checked least common
 multiple defines the alignment grid. An exact `segments` value wins over
 `resolution.circularSegments` and adaptive sampling, but is never rounded: it must already be
-aligned and meet `minimumSegments`. Adaptive counts are rounded upward and fail with
+aligned and meet `minSegments`. Adaptive counts are rounded upward and fail with
 `COMPLEXITY_LIMIT` when the aligned result exceeds the configured safety cap.
 ## Parameters
@@ -47,7 +47,7 @@ Required alignment factors plus optional floor, exact count, and resolution.
   Explicit sampling allocation ceilings.
-- [`minimumSegments`](AlignedCircularSegmentsOptions.md#minimumsegments) · `number` · Optional · Default: `3`
+- [`minSegments`](AlignedCircularSegmentsOptions.md#minsegments) · `number` · Optional · Default: `3`
   Additional full-circle segment floor, as a safe integer of at least three.
@@ -56,7 +56,7 @@ Required alignment factors plus optional floor, exact count, and resolution.
   Exact full-circle segment count.
   This takes precedence over `resolution.circularSegments` and adaptive sampling, and must
-  already satisfy every alignment factor and `minimumSegments`.
+  already satisfy every alignment factor and `minSegments`.
 - [`resolution`](AlignedCircularSegmentsOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
@@ -80,4 +80,4 @@ An aligned full-circle segment count.
 - [AlignedCircularSegmentsOptions](AlignedCircularSegmentsOptions.md)
 - [resolveCircularSegments](resolveCircularSegments.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveArcSegments.md CHANGED Viewed

@@ -2,7 +2,7 @@
 Resolves the number of segments needed for a circular arc.
-**resolveArcSegments**(`radius`: `number`, `angleDegrees`: `number`, `policy?`: [`CircularResolutionOptions`](CircularResolutionOptions.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): `number`
+**resolveArcSegments**(`radius`: `number`, `angle`: `number`, `policy?`: [`CircularResolutionOptions`](CircularResolutionOptions.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): `number`
@@ -25,9 +25,9 @@ Arc radius in millimetres.
-<a id="angledegrees"></a>
+<a id="angle"></a>
-**`angleDegrees`** · `number` · Required
+**`angle`** · `number` · Required
 Non-zero signed sweep angle no greater than 360 degrees in magnitude.
@@ -64,4 +64,4 @@ Segment count for the requested arc span.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [resolveCircularSegments](resolveCircularSegments.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveCircularSegments.md CHANGED Viewed

@@ -59,4 +59,4 @@ Full-circle segment count.
 - [resolveAlignedCircularSegments](resolveAlignedCircularSegments.md)
 - [resolveArcSegments](resolveArcSegments.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveCylindricalGear.md CHANGED Viewed

@@ -28,4 +28,4 @@ currently supported.
 - [CylindricalGearDimensions](CylindricalGearDimensions.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveCylindricalGearPair.md CHANGED Viewed

@@ -28,4 +28,4 @@ the same hand. The function validates those conjugate pitch invariants.
 - [CylindricalGearPairDimensions](CylindricalGearPairDimensions.md)
 - [CylindricalGearPairSpec](CylindricalGearPairSpec.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveExtrusionDivisions.md CHANGED Viewed

@@ -48,11 +48,11 @@ Twist, scale, exact divisions, and physical resolution controls.
   Operation-level physical policy over the nearest model scope.
-- [`scaleTop`](ExtrusionSamplingOptions.md#scaletop) · `number` \| [`Vector2Tuple`](Vector2Tuple.md) · Optional
+- [`scaleTop`](ExtrusionSamplingOptions.md#scaletop) · `number` \| [`Vector2Input`](Vector2Input.md) · Optional
   Finite uniform or XY scale of the top profile; defaults to one.
-- [`twistDegrees`](ExtrusionSamplingOptions.md#twistdegrees) · `number` · Optional
+- [`twist`](ExtrusionSamplingOptions.md#twist) · `number` · Optional
   Finite rotation of the top profile about +Z, in degrees; defaults to zero.
@@ -71,4 +71,4 @@ Number of intermediate copies, excluding the two end profiles.
 - [ExtrusionSamplingOptions](ExtrusionSamplingOptions.md)
 - [RegionData](RegionData.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveGeometrySamplingLimits.md CHANGED Viewed

@@ -23,4 +23,4 @@ Resolves finite positive safe-integer allocation ceilings without ambient state.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveGeometryTolerance.md CHANGED Viewed

@@ -56,4 +56,4 @@ A complete tolerance policy including the scale-resolved distance.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ResolvedGeometryTolerance](ResolvedGeometryTolerance.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolvePrintableThreadFitPolicy.md CHANGED Viewed

@@ -24,4 +24,4 @@ Resolves and validates a named or caller-defined print-fit policy.
 - [PrintableThreadFit](PrintableThreadFit.md)
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveRackPitch.md CHANGED Viewed

@@ -24,4 +24,4 @@ Resolves a rack segment that is conjugate with the same normal cylindrical pitch
 - [RackPitchDimensions](RackPitchDimensions.md)
 - [RackPitchSpec](RackPitchSpec.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveThreadCircularSegments.md CHANGED Viewed

@@ -7,7 +7,7 @@ Resolves a role-independent, start-aligned facet count from the larger female ma
 An exact `circularSegments` value must already be divisible by `starts`; it is never silently
-raised. Adaptive policies align upward and fail if that would exceed `maximumSegments`.
+raised. Adaptive policies align upward and fail if that would exceed `maxSegments`.
 ## Parameters
@@ -19,7 +19,7 @@ raised. Adaptive policies align upward and fail if that would exceed `maximumSeg
   Nominal major diameter before role-specific compensation.
-- [`profile`](ThreadCircularSegmentsOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](ThreadCircularSegmentsOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
   Validated mating profile whose pitch and flank capacities govern tessellation.
@@ -31,7 +31,7 @@ raised. Adaptive policies align upward and fail if that would exceed `maximumSeg
   Printable fit whose larger compensated female envelope governs tessellation.
-- [`maximumRadialOutset`](ThreadCircularSegmentsOptions.md#maximumradialoutset) · `number` · Optional
+- [`maxRadialOutset`](ThreadCircularSegmentsOptions.md#maxradialoutset) · `number` · Optional
   Maximum active female face outset beyond the compensated major envelope, in millimetres.
   This keeps a compensated male/female pair on one role-independent grid when an internal
@@ -56,4 +56,4 @@ raised. Adaptive policies align upward and fail if that would exceed `maximumSeg
 - [ThreadCircularSegmentsOptions](ThreadCircularSegmentsOptions.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/reverseTriangleMesh.md CHANGED Viewed

@@ -27,4 +27,4 @@ Fresh position and index buffers; the input remains unchanged.
 - [TriangleMesh](TriangleMesh.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/revolveMesh.md CHANGED Viewed

@@ -2,7 +2,7 @@
 Revolves a non-duplicated closed `[radius, z]` profile around +Z.
-`const` **revolveMesh**: (`profile`: readonly [`Vector2Tuple`](Vector2Tuple.md)[], `options?`: [`RevolveOptions`](RevolveOptions.md)) => [`TriangleMesh`](TriangleMesh.md)
+`const` **revolveMesh**: (`input`: [`Path2Input`](Path2Input.md), `options?`: [`RevolveOptions`](RevolveOptions.md)) => [`TriangleMesh`](TriangleMesh.md)
@@ -12,21 +12,20 @@ axis is emitted once and joined as a triangle fan, avoiding coincident seam
 vertices and zero-area quads. Profile edges that lie entirely on the axis
 collapse to the solid's interior and are intentionally omitted.
 Profile coordinates must fit finite Float32 mesh storage.
+Path2 profiles must be closed; raw point collections have an implicit closing edge.
 ## Example: Partial revolution with end caps
 ```ts
 // Each point is [radius, Z]; the profile seam is implicit.
-revolveMesh([[0, 0], [12, 0], [8, 20], [0, 20]], { revolveDegrees: 270 });
+revolveMesh([[0, 0], [12, 0], [8, 20], [0, 20]], { degrees: 270 });
 ```
 ## Parameters
-<a id="profile"></a>
+<a id="input"></a>
-**`profile`** · readonly [`Vector2Tuple`](Vector2Tuple.md)[] · Required
-Closed CCW `[radius, z]` profile without a duplicated seam point.
+**`input`** · [`Path2Input`](Path2Input.md) · Required
@@ -47,9 +46,10 @@ Optional physical or exact circumferential sampling controls. Defaults to `{}`.
   Operation-level physical tessellation policy over the active model-wide policy.
-- [`revolveDegrees`](RevolveOptions.md#revolvedegrees) · `number` · Optional
+- [`degrees`](RevolveOptions.md#degrees) · `number` · Optional · Default: `360`
-  Positive angular sweep no greater than 360 degrees; partial revolutions have end caps.
+  Positive sweep in degrees, no greater than 360. Defaults to a full revolution;
+  smaller sweeps form partial revolutions with end caps.
   Segment counts describe a complete circle and scale to this angular span. Native filled
   revolutions require at least three sweep intervals: adaptive sampling refines to that floor,
   while exact counts that imply fewer intervals reject. Pure revolveMesh supports one interval.
@@ -69,8 +69,8 @@ A closed indexed triangle mesh revolved counter-clockwise around +Z.
 ## Related APIs
+- [Path2Input](Path2Input.md)
 - [RevolveOptions](RevolveOptions.md)
 - [TriangleMesh](TriangleMesh.md)
-- [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/rotate2.md CHANGED Viewed

@@ -33,4 +33,4 @@ Rotates a finite vector counter-clockwise in XY by `degrees` about the origin. T
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/rotationTransform3.md CHANGED Viewed

@@ -50,4 +50,4 @@ A frozen row-major transform.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/roundClosedPolylinePath.md CHANGED Viewed

@@ -2,7 +2,7 @@
 Replaces each vertex of a non-duplicated closed polyline with a sampled quadratic corner in the same coordinate system as the input.
-`const` **roundClosedPolylinePath**: (`points`: readonly [`Vector3Tuple`](Vector3Tuple.md)[], `radius`: `number`, `segmentsPerCorner`: `number`, `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>) => readonly [`Vector3Tuple`](Vector3Tuple.md)[]
+`const` **roundClosedPolylinePath**: (`input`: [`Path3Input`](Path3Input.md), `radius`: `number`, `segmentsPerCorner`: `number`, `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>) => readonly [`Vector3Tuple`](Vector3Tuple.md)[]
@@ -10,12 +10,13 @@ Replaces each vertex of a non-duplicated closed polyline with a sampled quadrati
 45% of adjacent segment lengths to prevent neighboring corners from crossing.
 The returned path does not duplicate its closing point.
 Coordinates and radius must be finite; input and output are each limited by maxPathPoints (default 100000).
+Requires a closed path value; raw tuples are interpreted as closed. Invalid inputs throw GeometryError.
 ## Parameters
-<a id="points"></a>
+<a id="input"></a>
-**`points`** · readonly [`Vector3Tuple`](Vector3Tuple.md)[] · Required
+**`input`** · [`Path3Input`](Path3Input.md) · Required
@@ -45,6 +46,7 @@ readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 ## Related APIs
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
+- [Path3Input](Path3Input.md)
 - [Vector3Tuple](Vector3Tuple.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleContour.md CHANGED Viewed

@@ -33,7 +33,7 @@ Closed contour in millimetres unless positive scales convert its coordinates.
 **`options`** · [`SampleContourOptions`](SampleContourOptions.md) · Optional
-Physical resolution and unique vertex budget; defaults to 4096 vertices.
+Physical resolution and unique vertex budget; defaults to min(4096, maxProfilePoints).
 - [`widthScale`](SampleContourOptions.md#widthscale) · `number` · Optional
@@ -47,7 +47,7 @@ Physical resolution and unique vertex budget; defaults to 4096 vertices.
   Physical policy evaluated after scaling, using the shared curve sampler.
-- [`maximumVertices`](SampleContourOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](SampleContourOptions.md#maxvertices) · `number` · Optional
   Unique output vertex ceiling, at least three, within maxProfilePoints. Defaults to min(4096, maxProfilePoints).
@@ -74,4 +74,4 @@ Frozen counterclockwise loop in millimetres, without a repeated seam endpoint.
 - [ContourCurve](ContourCurve.md)
 - [SampleContourOptions](SampleContourOptions.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleCurve2.md CHANGED Viewed

@@ -9,7 +9,7 @@ Samples a planar curve with the same guarantees and policy as spatial sampling.
 ## Example
 ```ts
-const turn = sampleCurve2({kind: "arc", center: [0,0], radius: 10, sweepDegrees: 90});
+const turn = sampleCurve2({kind: "arc", center: [0,0], radius: 10, sweepAngle: 90});
 ```
 ## Parameters
@@ -32,7 +32,7 @@ const turn = sampleCurve2({kind: "arc", center: [0,0], radius: 10, sweepDegrees:
   Millimetre sampling policy; circularSegments applies only to arcs.
-- [`maximumVertices`](CurveSamplingOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](CurveSamplingOptions.md#maxvertices) · `number` · Optional
   Output vertex ceiling of at least two; may only lower limits.maxPathPoints.
@@ -58,4 +58,4 @@ frozen. At stationary tangents, outgoing secants are preferred and endpoints use
 - [CurveSamplingOptions](CurveSamplingOptions.md)
 - [SampledCurve2](SampledCurve2.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleCurve3.md CHANGED Viewed

@@ -32,7 +32,7 @@ const path = sampleCurve3({kind: "cubic", start: [0,0,0], control1: [5,0,0], con
   Millimetre sampling policy; circularSegments applies only to arcs.
-- [`maximumVertices`](CurveSamplingOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](CurveSamplingOptions.md#maxvertices) · `number` · Optional
   Output vertex ceiling of at least two; may only lower limits.maxPathPoints.
@@ -58,4 +58,4 @@ bound the full control hull. Full-circle arcs repeat their endpoint; closed poly
 - [CurveSamplingOptions](CurveSamplingOptions.md)
 - [SampledCurve3](SampledCurve3.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleCylindricalGearOutline.md CHANGED Viewed

@@ -55,4 +55,4 @@ seam point, and contains no holes. Its center is the origin and its axis is
 - [CylindricalGearOutlineOptions](CylindricalGearOutlineOptions.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleHelix.md CHANGED Viewed

@@ -1,6 +1,6 @@
 # sampleHelix
-Creates `segments + 1` points including exact helix endpoints from finite positive dimensions. Integrated weights must remain finite. The maxPathPoints ceiling defaults to 100000; excessive exact counts reject before evaluating axial weights or allocating sample arrays.
+Creates `segments + 1` points including exact helix endpoints from finite positive dimensions. Integrated weights must remain finite. The maxPathPoints ceiling defaults to 100000; excessive exact counts reject before evaluating axial weights or allocating sample arrays. Invalid inputs use GeometryError; exceptions thrown by axialWeight propagate unchanged.
 `const` **sampleHelix**: (`{
   turns,
@@ -38,4 +38,4 @@ readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 - [SampleHelixOptions](SampleHelixOptions.md)
 - [Vector3Tuple](Vector3Tuple.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleInternalCylindricalGearSpaceOutline.md CHANGED Viewed

@@ -56,4 +56,4 @@ when used as a region hole.
 - [CylindricalGearOutlineOptions](CylindricalGearOutlineOptions.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleRackToothPath.md CHANGED Viewed

@@ -2,7 +2,7 @@
 Samples the open top boundary of a finite rack in its XY pitch plane.
-**sampleRackToothPath**(`spec`: [`RackPitchSpec`](RackPitchSpec.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): [`Path2`](Path2.md)
+**sampleRackToothPath**(`spec`: [`RackPitchSpec`](RackPitchSpec.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): [`Path2Data`](Path2Data.md)
@@ -27,13 +27,13 @@ the owning generator.
 ## Returns
-[`Path2`](Path2.md)
+[`Path2Data`](Path2Data.md)
 ## Related APIs
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-- [Path2](Path2.md)
+- [Path2Data](Path2Data.md)
 - [RackPitchSpec](RackPitchSpec.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleSideProfile.md CHANGED Viewed

@@ -29,7 +29,7 @@ Open outline in millimetres unless the positive scales convert its coordinates.
 **`options`** · [`SampleSideProfileOptions`](SampleSideProfileOptions.md) · Optional
-Physical resolution and output budget; defaults to 4096 vertices.
+Physical resolution and output budget; defaults to min(4096, maxProfilePoints).
 - [`radiusScale`](SampleSideProfileOptions.md#radiusscale) · `number` · Optional
@@ -43,7 +43,7 @@ Physical resolution and output budget; defaults to 4096 vertices.
   Shared physical policy, evaluated after scaling; exact circular counts do not affect curves.
-- [`maximumVertices`](SampleSideProfileOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](SampleSideProfileOptions.md#maxvertices) · `number` · Optional
   Maximum output vertex count within maxProfilePoints. Defaults to the smaller of 4096 and that ceiling.
@@ -70,4 +70,4 @@ Frozen open polyline in millimetres, ordered from lowest to highest anchor.
 - [SideProfileCurve](SideProfileCurve.md)
 - [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleTextContours.md CHANGED Viewed

@@ -50,4 +50,4 @@ Frozen contours with original glyph winding and no repeated closing vertex.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [VectorTextLayout](VectorTextLayout.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleThreadHelices.md CHANGED Viewed

@@ -32,7 +32,7 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
   Explicit aggregate path allocation ceilings across all starts.
-- [`phaseDegrees`](ThreadHelixOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](ThreadHelixOptions.md#phase) · `number` · Optional
   Angular offset of the first start in degrees. Default: `0`.
@@ -60,4 +60,4 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 - [SampledThreadHelices](SampledThreadHelices.md)
 - [ThreadHelixOptions](ThreadHelixOptions.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/scale2.md CHANGED Viewed

@@ -33,4 +33,4 @@ Multiplies a vector by a dimensionless scalar.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/scale3.md CHANGED Viewed

@@ -39,4 +39,4 @@ scale3([1, 2, 3], 2); // [2, 4, 6]
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/scaleTransform3.md CHANGED Viewed

@@ -35,4 +35,4 @@ A frozen row-major transform.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/signedContourArea.md CHANGED Viewed

@@ -23,4 +23,4 @@ Returns the signed area of a non-duplicated loop; positive means CCW.
 - [Contour](Contour.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/starContour.md CHANGED Viewed

@@ -48,4 +48,4 @@ readonly [`Vector2Tuple`](Vector2Tuple.md)[]
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/strokeRegionData.md ADDED Viewed

@@ -0,0 +1,63 @@
+# strokeRegionData
+Converts a sampled millimetre path into the filled region covered by a centered stroke.
+**strokeRegionData**(`path`: [`Path2Input`](Path2Input.md), `options`: [`StrokeOptions`](StrokeOptions.md)): [`RegionData`](RegionData.md)
+Closed paths omit a duplicated seam point. Zero-length sampled segments are ignored, while the
+effective path must still contain visible length. Round caps and joins use deterministic physical
+resolution. Bevels fill the outer corner triangle; miters extend the outer edges to their
+intersection, falling back to bevels above SVG's default miter limit of 4.
+## Parameters
+<a id="path"></a>
+**`path`** · [`Path2Input`](Path2Input.md) · Required
+<a id="options"></a>
+**`options`** · [`StrokeOptions`](StrokeOptions.md) · Required
+- [`width`](StrokeOptions.md#width) · `number` · Required
+  Positive total stroke width in millimetres, centered on the sampled path.
+- [`limits`](StrokeOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+  Explicit path, circular and expanded-profile allocation ceilings.
+- [`closed`](StrokeOptions.md#closed) · `boolean` · Optional
+  Raw point closure defaults to false; a Path2 supplies its closure and rejects conflicts.
+- [`cap`](StrokeOptions.md#cap) · [`StrokeCap`](StrokeCap.md) · Optional
+  End-cap treatment for an open path. Ignored for closed paths. Default: `butt`.
+- [`join`](StrokeOptions.md#join) · [`StrokeJoin`](StrokeJoin.md) · Optional
+  Corner treatment; miters exceeding SVG's default limit of 4 become bevels. Default: `miter`.
+- [`resolution`](StrokeOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+  Physical tessellation policy for round caps and joins.
+## Returns
+[`RegionData`](RegionData.md)
+## Related APIs
+- [Path2Input](Path2Input.md)
+- [RegionData](RegionData.md)
+- [StrokeOptions](StrokeOptions.md)
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/subtract2.md CHANGED Viewed

@@ -33,4 +33,4 @@ Subtracts `b` from `a` component-wise.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/subtract3.md CHANGED Viewed

@@ -39,4 +39,4 @@ subtract3([4, 5, 6], [1, 2, 3]); // [3, 3, 3]
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.