@metamesh/modeling 0.14.0 → 0.15.0

package/dist/docs/reference/geometry/{buildHelicalThreadRidgeMesh.md → helicalThreadRidgeMesh.md}

@@ -1,8 +1,8 @@
-# buildHelicalThreadRidgeMesh
+# helicalThreadRidgeMesh
 
 Builds closed thread-ridge components with every profile locked to the shaft's radial/axial frame. The mesh is intended for union with its minor-envelope cylinder and never owns WASM objects.
 
-**buildHelicalThreadRidgeMesh**(`options`: [`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md)): [`TriangleMesh`](TriangleMesh.md)
+**helicalThreadRidgeMesh**(`options`: [`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -20,7 +20,7 @@ Builds closed thread-ridge components with every profile locked to the shaft's r
 
   Nominal major diameter before any caller-owned fit compensation.
 
-- [`profile`](HelicalThreadRidgeMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](HelicalThreadRidgeMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -37,7 +37,7 @@ Builds closed thread-ridge components with every profile locked to the shaft's r
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](HelicalThreadRidgeMeshOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](HelicalThreadRidgeMeshOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -65,4 +65,4 @@ Builds closed thread-ridge components with every profile locked to the shaft's r
 - [HelicalThreadRidgeMeshOptions](HelicalThreadRidgeMeshOptions.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/{buildHelicalThreadSolidMesh.md → helicalThreadSolidMesh.md}

@@ -1,8 +1,8 @@
-# buildHelicalThreadSolidMesh
+# helicalThreadSolidMesh
 
 Builds one closed threaded cylinder without a ridge/core Boolean seam.
 
-**buildHelicalThreadSolidMesh**(`options`: [`HelicalThreadSolidMeshOptions`](HelicalThreadSolidMeshOptions.md)): [`TriangleMesh`](TriangleMesh.md)
+**helicalThreadSolidMesh**(`options`: [`HelicalThreadSolidMeshOptions`](HelicalThreadSolidMeshOptions.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -26,7 +26,7 @@ arrays.
 
   Nominal major diameter before any caller-owned fit compensation.
 
-- [`profile`](HelicalThreadSolidMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](HelicalThreadSolidMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -43,7 +43,7 @@ arrays.
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](HelicalThreadSolidMeshOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](HelicalThreadSolidMeshOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -99,4 +99,4 @@ arrays.
 - [HelicalThreadSolidMeshOptions](HelicalThreadSolidMeshOptions.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/inverseTransform3.md

@@ -31,4 +31,4 @@ A new frozen transform whose composition with the input is identity.
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/isGeometryError.md

@@ -23,4 +23,4 @@ Recognizes structured geometry errors from separately bundled Modeling copies in
 
 - [GeometryError](GeometryError.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/joinTriangleMeshes.md

@@ -33,4 +33,4 @@ Fresh typed arrays with indices offset to their source vertex ranges.
 
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/layoutRow.md

@@ -40,4 +40,4 @@ readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/length2.md

@@ -27,4 +27,4 @@ Returns Euclidean vector length in the vector's coordinate units.
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/length3.md

@@ -27,4 +27,4 @@ Returns Euclidean vector length in the vector's coordinate units.
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/lerp2.md

@@ -39,4 +39,4 @@ Linearly interpolates two vectors; `t` is dimensionless and may extrapolate.
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/lerp3.md

@@ -39,4 +39,4 @@ Linearly interpolates two vectors; `t` is dimensionless and may extrapolate.
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/linearPatternTransforms.md

@@ -1,6 +1,6 @@
 # linearPatternTransforms
 
-Equal linear placements in millimetres, including the original at the origin.
+Spatial XYZ matrix placements in millimetres, including the original at the origin.
 
 **linearPatternTransforms**(`options`: [`LinearPatternOptions`](LinearPatternOptions.md)): readonly [`Transform3Matrix`](Transform3Matrix.md)[]
 
@@ -28,4 +28,4 @@ readonly [`Transform3Matrix`](Transform3Matrix.md)[]
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/loftMesh.md

@@ -19,6 +19,7 @@ seam and original vertices; unequal counts gain subdivisions or repeated fan slo
 Both ends use ear-clipped caps, supporting concave profiles without center fans.
 Intermediate slices interpolate placed world vertices, never frame axes.
 Transformed coordinates must fit finite Float32 mesh storage.
+Path2 profiles must be closed; raw point collections are interpreted as closed.
 
 ## Parameters
 
@@ -69,4 +70,4 @@ Transformed coordinates must fit finite Float32 mesh storage.
 - [LoftOptions](LoftOptions.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/matchProfiles.md

@@ -48,4 +48,4 @@ readonly [`CorrespondingProfile`](CorrespondingProfile.md)[]
 - [MatchProfilesOptions](MatchProfilesOptions.md)
 - [Profile](Profile.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/measureInternalCylindricalGearPairMotion.md

@@ -45,4 +45,4 @@ misses. It is a deterministic model check, not a certified gear-rating calculati
 - [CylindricalGearPairMotionReport](CylindricalGearPairMotionReport.md)
 - [CylindricalGearPairSpec](CylindricalGearPairSpec.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/meshBounds.md

@@ -32,4 +32,4 @@ Fresh immutable minimum and maximum XYZ tuples.
 - [Bounds3](Bounds3.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/minimumCylindricalGearToothCountWithoutUndercut.md

@@ -2,7 +2,7 @@
 
 Returns the smallest unshifted full-depth external tooth count that avoids rack-cutter undercut.
 
-**minimumCylindricalGearToothCountWithoutUndercut**(`spec?`: `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngleDegrees"` \| `"pressureAngleDegrees"`\>\>): `number`
+**minimumCylindricalGearToothCountWithoutUndercut**(`spec?`: `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngle"` \| `"pressureAngle"`\>\>): `number`
 
 
 
@@ -13,7 +13,7 @@ count `z_v = z / cos³(beta)`, so increasing helix angle can reduce the physical
 
 <a id="spec"></a>
 
-**`spec`** · `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngleDegrees"` \| `"pressureAngleDegrees"`\>\> · Optional
+**`spec`** · `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngle"` \| `"pressureAngle"`\>\> · Optional
 
 
 
@@ -26,4 +26,4 @@ count `z_v = z / cos³(beta)`, so increasing helix angle can reduce the physical
 
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalize2.md

@@ -33,4 +33,4 @@ Returns a unit vector; `epsilon` is a finite, non-negative length threshold (def
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalize3.md

@@ -33,4 +33,4 @@ Returns a unit vector; `epsilon` is a finite, non-negative length threshold (def
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalizeContour.md

@@ -42,4 +42,4 @@ returned unchanged when their winding and tolerance policy match.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalizePolygon.md

@@ -34,4 +34,4 @@ may be returned unchanged under the same tolerance policy.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [PolygonData](PolygonData.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalizeRegion.md

@@ -30,4 +30,4 @@ Validates a disjoint explicit region and returns immutable normalized data. Prev
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [RegionData](RegionData.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/optimizePlanarPatches.md

@@ -28,44 +28,44 @@ Closed, consistently wound indexed triangle mesh in arbitrary consistent units.
 
 Patch eligibility, numeric tolerance, and deterministic work bounds.
 
-- [`maximumFlipAttempts`](PlanarMeshOptimizationOptions.md#maximumflipattempts) · `number` · Optional
+- [`maxFlipAttempts`](PlanarMeshOptimizationOptions.md#maxflipattempts) · `number` · Optional
 
   Maximum attempted edge evaluations. By default this is twenty times the initial candidate
   edge count, capped at `1000000`.
 
-- [`maximumEdgeRevisits`](PlanarMeshOptimizationOptions.md#maximumedgerevisits) · `number` · Optional
+- [`maxEdgeRevisits`](PlanarMeshOptimizationOptions.md#maxedgerevisits) · `number` · Optional
 
   Maximum times one edge may be reconsidered after neighbouring flips. Defaults to `12`.
 
-- [`maximumPatchTriangleCount`](PlanarMeshOptimizationOptions.md#maximumpatchtrianglecount) · `number` · Optional
+- [`maxPatchTriangles`](PlanarMeshOptimizationOptions.md#maxpatchtriangles) · `number` · Optional
 
   Maximum triangles allowed in one selected patch. Defaults to `50000`.
 
-- [`maximumProcessedTriangleCount`](PlanarMeshOptimizationOptions.md#maximumprocessedtrianglecount) · `number` · Optional
+- [`maxProcessedTriangles`](PlanarMeshOptimizationOptions.md#maxprocessedtriangles) · `number` · Optional
 
   Maximum cumulative triangles across selected patches. Defaults to `200000`.
 
-- [`minimumPatchTriangleCount`](PlanarMeshOptimizationOptions.md#minimumpatchtrianglecount) · `number` · Optional
+- [`minPatchTriangles`](PlanarMeshOptimizationOptions.md#minpatchtriangles) · `number` · Optional
 
   Minimum triangles required before a planar patch is eligible. Defaults to `8`.
 
-- [`triggerMaximumAspectRatio`](PlanarMeshOptimizationOptions.md#triggermaximumaspectratio) · `number` · Optional
+- [`triggerMaxAspectRatio`](PlanarMeshOptimizationOptions.md#triggermaxaspectratio) · `number` · Optional
 
   Select patches whose worst normalized aspect ratio exceeds this value. Defaults to `12`.
 
-- [`triggerMaximumFanRatio`](PlanarMeshOptimizationOptions.md#triggermaximumfanratio) · `number` · Optional
+- [`triggerMaxFanRatio`](PlanarMeshOptimizationOptions.md#triggermaxfanratio) · `number` · Optional
 
   Select patches whose largest per-vertex triangle share exceeds this ratio. Defaults to `0.2`.
 
-- [`triggerMaximumVertexTriangleIncidence`](PlanarMeshOptimizationOptions.md#triggermaximumvertextriangleincidence) · `number` · Optional
+- [`triggerMaxVertexTriangleIncidence`](PlanarMeshOptimizationOptions.md#triggermaxvertextriangleincidence) · `number` · Optional
 
   Select patches whose largest vertex triangle incidence exceeds this value. Defaults to `16`.
 
-- [`triggerMinimumAngleDegrees`](PlanarMeshOptimizationOptions.md#triggerminimumangledegrees) · `number` · Optional
+- [`triggerMinAngleDegrees`](PlanarMeshOptimizationOptions.md#triggerminangledegrees) · `number` · Optional
 
   Select patches whose smallest interior angle is below this many degrees. Defaults to `8`.
 
-- [`maximumTriangleCount`](PlanarMeshOptimizationOptions.md#maximumtrianglecount) · `number` · Optional
+- [`maxTriangles`](PlanarMeshOptimizationOptions.md#maxtriangles) · `number` · Optional
 
   Maximum number of triangles inspected. Defaults to `200000`.
 
@@ -88,4 +88,4 @@ Optimized connectivity and before/after diagnostics, or an unchanged safe fallba
 - [PlanarMeshOptimizationResult](PlanarMeshOptimizationResult.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/path2.md

@@ -0,0 +1,42 @@
+# path2
+
+Snapshots finite XY coordinates as an immutable sampled path, independent of engine initialization. Open paths may be empty or have one point; closed paths need three vertices and omit a duplicated seam. Repeated adjacent vertices are retained. No winding normalization or filling is performed. Malformed dimensions or topology throw INVALID_ARGUMENT; nonfinite coordinates or measurement overflow throw NON_FINITE_VALUE; exhausted allocation ceilings throw COMPLEXITY_LIMIT GeometryError. A path input retains its closure. Limits bound construction only; resampling takes its own limits.
+
+**path2**(`input`: [`Path2Input`](Path2Input.md), `options?`: [`PathOptions`](PathOptions.md)): [`Path2`](Path2-type.md)
+
+
+
+## Parameters
+
+<a id="input"></a>
+
+**`input`** · [`Path2Input`](Path2Input.md) · Required
+
+
+
+<a id="options"></a>
+
+**`options`** · [`PathOptions`](PathOptions.md) · Optional
+
+- [`closed`](PathOptions.md#closed) · `boolean` · Optional
+
+  Connects the last vertex to the first; closed paths omit the repeated seam. Defaults to false.
+
+- [`limits`](PathOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+
+  Construction point ceiling; defaults to package sampling limits. Later sampling has its own options.
+
+
+
+## Returns
+
+[`Path2`](Path2-type.md)
+
+
+## Related APIs
+
+- [Path2](Path2-type.md)
+- [Path2Input](Path2Input.md)
+- [PathOptions](PathOptions.md)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/path3.md

@@ -0,0 +1,42 @@
+# path3
+
+Snapshots finite XYZ coordinates as an immutable sampled path with the same closure, seam, allocation and error rules as path2. Analytic curves must be sampled explicitly first.
+
+**path3**(`input`: [`Path3Input`](Path3Input.md), `options?`: [`PathOptions`](PathOptions.md)): [`Path3`](Path3-type.md)
+
+
+
+## Parameters
+
+<a id="input"></a>
+
+**`input`** · [`Path3Input`](Path3Input.md) · Required
+
+
+
+<a id="options"></a>
+
+**`options`** · [`PathOptions`](PathOptions.md) · Optional
+
+- [`closed`](PathOptions.md#closed) · `boolean` · Optional
+
+  Connects the last vertex to the first; closed paths omit the repeated seam. Defaults to false.
+
+- [`limits`](PathOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+
+  Construction point ceiling; defaults to package sampling limits. Later sampling has its own options.
+
+
+
+## Returns
+
+[`Path3`](Path3-type.md)
+
+
+## Related APIs
+
+- [Path3](Path3-type.md)
+- [Path3Input](Path3Input.md)
+- [PathOptions](PathOptions.md)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/pathPatternTransforms.md

@@ -2,7 +2,7 @@
 
 Equal physical arc-length placements along a sampled XYZ path. Tangent orientation maps +Z onto the local path tangent; fixed orientation only translates. Closed paths omit a repeated seam. Explicit sampling ceilings bound both input points and output placements.
 
-**pathPatternTransforms**(`path`: readonly [`Vector3Tuple`](Vector3Tuple.md)[], `options`: [`PathPatternOptions`](PathPatternOptions.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): readonly [`Transform3Matrix`](Transform3Matrix.md)[]
+**pathPatternTransforms**(`path`: [`Path3Input`](Path3Input.md), `options`: [`PathPatternOptions`](PathPatternOptions.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): readonly [`Transform3Matrix`](Transform3Matrix.md)[]
 
 
 
@@ -10,7 +10,7 @@ Equal physical arc-length placements along a sampled XYZ path. Tangent orientati
 
 <a id="path"></a>
 
-**`path`** · readonly [`Vector3Tuple`](Vector3Tuple.md)[] · Required
+**`path`** · [`Path3Input`](Path3Input.md) · Required
 
 
 
@@ -24,11 +24,11 @@ Equal physical arc-length placements along a sampled XYZ path. Tangent orientati
 
 - [`closed`](PathPatternOptions.md#closed) · `boolean` · Optional
 
-  Include the closing edge without duplicating the seam; defaults to false.
+  Raw point closure defaults to false; a path value supplies closure and rejects conflicts.
 
 - [`orientation`](PathPatternOptions.md#orientation) · `"fixed"` \| `"tangent"` · Optional
 
-  Preserve the source orientation, or align its +Z to the path tangent; defaults to fixed.
+  Preserve orientation, or align local +X for Sections / +Z for Solids to the tangent. Defaults to fixed.
 
 
 
@@ -46,12 +46,12 @@ readonly [`Transform3Matrix`](Transform3Matrix.md)[]
 ## Related APIs
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
+- [Path3Input](Path3Input.md)
 - [PathPatternOptions](PathPatternOptions.md)
 - [Transform3Matrix](Transform3Matrix.md)
-- [Vector3Tuple](Vector3Tuple.md)
 
 ## Guides
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/preflightHeightfield.md

@@ -31,4 +31,4 @@ Checks grid dimensions, coordinate precision, and allocation bounds before evalu
 - [HeightfieldPreflight](HeightfieldPreflight.md)
 - [ModelingLimits](ModelingLimits.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/preflightHelicalThreadSolidMesh.md

@@ -20,7 +20,7 @@ Validates a direct thread solid and returns its conservative allocation estimate
 
   Nominal major diameter before any caller-owned fit compensation.
 
-- [`profile`](HelicalThreadSolidMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](HelicalThreadSolidMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -37,7 +37,7 @@ Validates a direct thread solid and returns its conservative allocation estimate
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](HelicalThreadSolidMeshOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](HelicalThreadSolidMeshOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -93,4 +93,4 @@ Validates a direct thread solid and returns its conservative allocation estimate
 - [HelicalThreadSolidMeshOptions](HelicalThreadSolidMeshOptions.md)
 - [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/preflightInternalThreadCutter.md

@@ -16,7 +16,7 @@ Preflights the exact extended mesh used by the internal thread cutter constructo
 
   Total threaded axial length in millimetres.
 
-- [`profile`](InternalThreadCutterOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](InternalThreadCutterOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -37,7 +37,7 @@ Preflights the exact extended mesh used by the internal thread cutter constructo
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](InternalThreadCutterOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](InternalThreadCutterOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -82,4 +82,4 @@ Preflights the exact extended mesh used by the internal thread cutter constructo
 - [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 - [InternalThreadCutterOptions](InternalThreadCutterOptions.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/preflightSvgRegion.md

@@ -53,4 +53,4 @@ The canonical normalized region plus bounded source, topology, and safe-repair f
 - [SvgImportOptions](SvgImportOptions.md)
 - [SvgRegionPreflight](SvgRegionPreflight.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/preflightThreadedNut.md

@@ -12,7 +12,7 @@ Resolves a nut's exact body/cutter chamfer and preflights its extended thread me
 
 **`options`** · [`ThreadedNutOptions`](ThreadedNutOptions.md) · Required
 
-- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -45,7 +45,7 @@ Resolves a nut's exact body/cutter chamfer and preflights its extended thread me
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](ThreadedNutOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](ThreadedNutOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -93,4 +93,4 @@ Resolves a nut's exact body/cutter chamfer and preflights its extended thread me
 - [ThreadedNutOptions](ThreadedNutOptions.md)
 - [ThreadedNutPreflight](ThreadedNutPreflight.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/preflightThreadedRod.md

@@ -16,7 +16,7 @@ Preflights the exact compensated direct mesh used by the threaded rod constructo
 
   Total threaded axial length in millimetres.
 
-- [`profile`](ThreadedRodOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](ThreadedRodOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -37,7 +37,7 @@ Preflights the exact compensated direct mesh used by the threaded rod constructo
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](ThreadedRodOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](ThreadedRodOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -82,4 +82,4 @@ Preflights the exact compensated direct mesh used by the threaded rod constructo
 - [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 - [ThreadedRodOptions](ThreadedRodOptions.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/projectOntoPlane3.md

@@ -33,4 +33,4 @@ Removes the component parallel to a normalized plane normal.
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/radialPatternTransforms.md

@@ -12,22 +12,6 @@ Rotations about an explicit axis; angles use degrees and the first placement is
 
 **`options`** · [`RadialPatternOptions`](RadialPatternOptions.md) · Required
 
-- [`count`](RadialPatternOptions.md#count) · `number` · Required
-
-  Number of solids to return, including the original.
-
-- [`axis`](RadialPatternOptions.md#axis) · [`Vector3Tuple`](Vector3Tuple.md) · Required
-
-  Axis of the right-handed rotation. Its magnitude is ignored.
-
-- [`angleDegrees`](RadialPatternOptions.md#angledegrees) · `number` · Required
-
-  Signed rotation from one copy to the next, in degrees.
-
-- [`center`](RadialPatternOptions.md#center) · [`Vector3Tuple`](Vector3Tuple.md) · Optional
-
-  Rotation center in world coordinates. Defaults to the origin.
-
 
 
 ## Returns
@@ -44,4 +28,4 @@ readonly [`Transform3Matrix`](Transform3Matrix.md)[]
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/rectangleContour.md

@@ -46,4 +46,4 @@ rectangleContour({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
 - [Contour](Contour.md)
 - [RectangleContourOptions](RectangleContourOptions.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/rectangleProfile.md

@@ -50,4 +50,4 @@ rectangleProfile({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
 - [Profile](Profile.md)
 - [RectangleProfileOptions](RectangleProfileOptions.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/regionArea.md

@@ -31,4 +31,4 @@ Total filled area in square millimetres.
 
 - [RegionData](RegionData.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/regionBounds.md

@@ -24,4 +24,4 @@ Returns finite axis-aligned bounds for a non-empty region.
 - [Bounds2](Bounds2.md)
 - [RegionData](RegionData.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/regularPolygonContour.md

@@ -34,7 +34,7 @@ regularPolygonContour({ radius: 10, sides: 6, sizing: "face" });
 
   Vertex sizing is inscribed; face sizing circumscribes the nominal radius. Defaults to vertex.
 
-- [`rotationDegrees`](RegularPolygonContourOptions.md#rotationdegrees) · `number` · Optional
+- [`rotation`](RegularPolygonContourOptions.md#rotation) · `number` · Optional
 
   Counterclockwise rotation in degrees; defaults to zero with a vertex on +X.
 
@@ -50,4 +50,4 @@ readonly [`Vector2Tuple`](Vector2Tuple.md)[]
 - [RegularPolygonContourOptions](RegularPolygonContourOptions.md)
 - [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.15.0`.