@matter/types 0.17.4 → 0.17.5-alpha.0-20260704-9ea70abfa

package/dist/esm/clusters/water-heater-management.d.ts

@@ -20,7 +20,7 @@ import type { MaybePromise } from "@matter/general";
  * Heating of hot water is one of the main energy uses in homes, and when coupled with the Energy Management cluster, it
  * can help consumers save cost (e.g. using power at cheaper times or from local solar PV generation).
  *
- * @see {@link MatterSpecification.v151.Cluster} § 9.5
+ * @see {@link MatterSpecification.v16.Cluster} § 9.5
  */
 export declare namespace WaterHeaterManagement {
     /**
@@ -34,7 +34,7 @@ export declare namespace WaterHeaterManagement {
     export const name: "WaterHeaterManagement";
 
     /**
-     * The cluster revision assigned by {@link MatterSpecification.v151.Cluster}.
+     * The cluster revision assigned by {@link MatterSpecification.v16.Cluster}.
      */
     export const revision: 2;
 
@@ -53,14 +53,14 @@ export declare namespace WaterHeaterManagement {
          * Indicates the heat sources that the water heater can call on for heating. If a bit is set then the water
          * heater supports the corresponding heat source.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.1
          */
         heaterTypes: WaterHeaterHeatSource;
 
         /**
          * Indicates if the water heater is heating water. If a bit is set then the corresponding heat source is active.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.2
          */
         heatDemand: WaterHeaterHeatSource;
 
@@ -69,7 +69,7 @@ export declare namespace WaterHeaterManagement {
          *
          * See Section 9.5.8.1, "Boost Command" and Section 9.5.8.2, "CancelBoost Command" for more details.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.6
          */
         boostState: BoostState;
     }
@@ -82,7 +82,7 @@ export declare namespace WaterHeaterManagement {
          * Indicates the volume of water that the hot water tank can hold (in units of Litres). This allows an energy
          * management system to estimate the required heating energy needed to reach the target temperature.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.3
          */
         tankVolume: number;
 
@@ -111,7 +111,7 @@ export declare namespace WaterHeaterManagement {
          *   1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside the
          *   scope of this cluster.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.4
          */
         estimatedHeatRequired: number | bigint;
     }
@@ -143,7 +143,7 @@ export declare namespace WaterHeaterManagement {
          *   was assumed to be 20°C: TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature
          *   - COLD_WATER_TEMP)) * 100) TankPercentage = min( max(TankPercentage,0), 100) TankPercentage = 50%
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.5
          */
         tankPercentage: number;
     }
@@ -159,14 +159,14 @@ export declare namespace WaterHeaterManagement {
          * Indicates the heat sources that the water heater can call on for heating. If a bit is set then the water
          * heater supports the corresponding heat source.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.1
          */
         heaterTypes: WaterHeaterHeatSource;
 
         /**
          * Indicates if the water heater is heating water. If a bit is set then the corresponding heat source is active.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.2
          */
         heatDemand: WaterHeaterHeatSource;
 
@@ -175,7 +175,7 @@ export declare namespace WaterHeaterManagement {
          *
          * See Section 9.5.8.1, "Boost Command" and Section 9.5.8.2, "CancelBoost Command" for more details.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.6
          */
         boostState: BoostState;
 
@@ -183,7 +183,7 @@ export declare namespace WaterHeaterManagement {
          * Indicates the volume of water that the hot water tank can hold (in units of Litres). This allows an energy
          * management system to estimate the required heating energy needed to reach the target temperature.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.3
          */
         tankVolume: number;
 
@@ -212,7 +212,7 @@ export declare namespace WaterHeaterManagement {
          *   1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside the
          *   scope of this cluster.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.4
          */
         estimatedHeatRequired: number | bigint;
 
@@ -239,7 +239,7 @@ export declare namespace WaterHeaterManagement {
          *   was assumed to be 20°C: TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature
          *   - COLD_WATER_TEMP)) * 100) TankPercentage = min( max(TankPercentage,0), 100) TankPercentage = 50%
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.7.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.7.5
          */
         tankPercentage: number;
     }
@@ -251,7 +251,7 @@ export declare namespace WaterHeaterManagement {
         /**
          * Allows a client to request that the water heater is put into a Boost state.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.8.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.8.1
          */
         boost(request: BoostRequest): MaybePromise;
 
@@ -260,7 +260,7 @@ export declare namespace WaterHeaterManagement {
          *
          * This command has no payload.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.8.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.8.2
          */
         cancelBoost(): MaybePromise;
     }
@@ -279,14 +279,14 @@ export declare namespace WaterHeaterManagement {
          *
          * The corresponding structure fields within the WaterHeaterBoostInfoStruct are copied from the Boost command.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.9.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.9.1
          */
         boostStarted: BoostStartedEvent;
 
         /**
          * This event shall be generated whenever the BoostState transitions from Active to Inactive.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.9.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.9.2
          */
         boostEnded: void;
     }
@@ -303,14 +303,14 @@ export declare namespace WaterHeaterManagement {
          *
          * The corresponding structure fields within the WaterHeaterBoostInfoStruct are copied from the Boost command.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.9.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.9.1
          */
         boostStarted: BoostStartedEvent;
 
         /**
          * This event shall be generated whenever the BoostState transitions from Active to Inactive.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.9.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.9.2
          */
         boostEnded: void;
     }
@@ -325,7 +325,7 @@ export declare namespace WaterHeaterManagement {
     /**
      * These are optional features supported by WaterHeaterManagementCluster.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.5.4
+     * @see {@link MatterSpecification.v16.Cluster} § 9.5.4
      */
     export enum Feature {
         /**
@@ -344,7 +344,7 @@ export declare namespace WaterHeaterManagement {
     }
 
     /**
-     * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.1
+     * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.1
      */
     export class WaterHeaterHeatSource {
         constructor(values?: Partial<WaterHeaterHeatSource> | number);
@@ -376,7 +376,7 @@ export declare namespace WaterHeaterManagement {
     }
 
     /**
-     * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.2
+     * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.2
      */
     export enum BoostState {
         /**
@@ -393,7 +393,7 @@ export declare namespace WaterHeaterManagement {
     /**
      * Allows a client to request that the water heater is put into a Boost state.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.5.8.1
+     * @see {@link MatterSpecification.v16.Cluster} § 9.5.8.1
      */
     export class BoostRequest {
         constructor(values?: Partial<BoostRequest>);
@@ -405,7 +405,7 @@ export declare namespace WaterHeaterManagement {
      *
      * The corresponding structure fields within the WaterHeaterBoostInfoStruct are copied from the Boost command.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.5.9.1
+     * @see {@link MatterSpecification.v16.Cluster} § 9.5.9.1
      */
     export class BoostStartedEvent {
         constructor(values?: Partial<BoostStartedEvent>);
@@ -413,7 +413,7 @@ export declare namespace WaterHeaterManagement {
     }
 
     /**
-     * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.3
+     * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.3
      */
     export class WaterHeaterBoostInfo {
         constructor(values?: Partial<WaterHeaterBoostInfo>);
@@ -421,7 +421,7 @@ export declare namespace WaterHeaterManagement {
         /**
          * This field shall indicate the time period, in seconds, for which the boost state is activated.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.3.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.3.1
          */
         duration: number;
 
@@ -435,7 +435,7 @@ export declare namespace WaterHeaterManagement {
          *
          *   - the TargetPercentage (if specified).
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.3.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.3.2
          */
         oneShot?: boolean;
 
@@ -445,7 +445,7 @@ export declare namespace WaterHeaterManagement {
          *
          * The choice of which heat sources are activated is manufacturer specific.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.3.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.3.3
          */
         emergencyBoost?: boolean;
 
@@ -458,7 +458,7 @@ export declare namespace WaterHeaterManagement {
          * The value of this field shall be within the constraints of the MinHeatSetpointLimit and MaxHeatSetpointLimit
          * attributes (inclusive), of the thermostat cluster.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.3.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.3.4
          */
         temporarySetpoint?: number;
 
@@ -466,7 +466,7 @@ export declare namespace WaterHeaterManagement {
          * This field shall indicate the target percentage of hot water in the tank that the TankPercentage attribute
          * must reach before the heating is switched off.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.3.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.3.5
          */
         targetPercentage?: number;
 
@@ -481,7 +481,7 @@ export declare namespace WaterHeaterManagement {
          *
          * This field shall be less than or equal to the TargetPercentage field.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.5.6.3.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.5.6.3.6
          */
         targetReheat?: number;
     }

package/dist/esm/clusters/water-heater-mode.d.ts

@@ -19,7 +19,7 @@ import type { VendorId } from "../datatype/VendorId.js";
  * This cluster is derived from the Mode Base cluster and defines additional mode tags and namespaced enumerated values
  * for water heater devices.
  *
- * @see {@link MatterSpecification.v151.Cluster} § 9.6
+ * @see {@link MatterSpecification.v16.Cluster} § 9.6
  */
 export declare namespace WaterHeaterMode {
     /**
@@ -33,7 +33,7 @@ export declare namespace WaterHeaterMode {
     export const name: "WaterHeaterMode";
 
     /**
-     * The cluster revision assigned by {@link MatterSpecification.v151.Cluster}.
+     * The cluster revision assigned by {@link MatterSpecification.v16.Cluster}.
      */
     export const revision: 1;
 
@@ -57,12 +57,12 @@ export declare namespace WaterHeaterMode {
          * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT also
          * include an additional instance of any one of these tag types.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.6.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.6.1
          */
         supportedModes: ModeOption[];
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.6
          */
         currentMode: number;
     }
@@ -83,12 +83,12 @@ export declare namespace WaterHeaterMode {
          * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT also
          * include an additional instance of any one of these tag types.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.6.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.6.1
          */
         supportedModes: ModeOption[];
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.6
          */
         currentMode: number;
     }
@@ -102,7 +102,7 @@ export declare namespace WaterHeaterMode {
          *
          * On receipt of this command the device shall respond with a ChangeToModeResponse command.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 1.10.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 1.10.7.1
          */
         changeToMode(request: ModeBase.ChangeToModeRequest): MaybePromise<ModeBase.ChangeToModeResponse>;
     }
@@ -118,7 +118,7 @@ export declare namespace WaterHeaterMode {
     /**
      * These are optional features supported by WaterHeaterModeCluster.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.6.4
+     * @see {@link MatterSpecification.v16.Cluster} § 9.6.4
      */
     export enum Feature {
         /**
@@ -133,7 +133,7 @@ export declare namespace WaterHeaterMode {
      * The table below lists the changes relative to the Mode Base cluster for the fields of the ModeOptionStruct type.
      * A blank field indicates no change.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.6.5.1
+     * @see {@link MatterSpecification.v16.Cluster} § 9.6.5.1
      */
     export class ModeOption {
         constructor(values?: Partial<ModeOption>);
@@ -143,19 +143,19 @@ export declare namespace WaterHeaterMode {
          * the user to indicate what this option means. This field is meant to be readable and understandable by the
          * user.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 1.10.5.2.1
+         * @see {@link MatterSpecification.v16.Cluster} § 1.10.5.2.1
          */
         label: string;
 
         /**
          * This field is used to identify the mode option.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 1.10.5.2.2
+         * @see {@link MatterSpecification.v16.Cluster} § 1.10.5.2.2
          */
         mode: number;
 
         /**
-         * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
+         * This field shall contain a list of tags that are associated with the mode option. This can be used by clients
          * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
          * using standard definitions and/or manufacturer specific namespace definitions.
          *
@@ -190,66 +190,66 @@ export declare namespace WaterHeaterMode {
          *   - A mode that includes both a generic Quick tag (defined here), and Vacuum and Mop tags, (defined in the
          *     RVC Clean cluster that is a derivation of this cluster).
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 1.10.5.2.3
+         * @see {@link MatterSpecification.v16.Cluster} § 1.10.5.2.3
          */
         modeTags: ModeTagStruct[];
     }
 
     export enum ModeTag {
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         Auto = 0,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         Quick = 1,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         Quiet = 2,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         LowNoise = 3,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         LowEnergy = 4,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         Vacation = 5,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         Min = 6,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         Max = 7,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         Night = 8,
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1
          */
         Day = 9,
 
         /**
          * While in modes with this tag, the device will not attempt to keep the water warm.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1.1
          */
         Off = 16384,
 
@@ -257,7 +257,7 @@ export declare namespace WaterHeaterMode {
          * While in modes with this tag, the device will attempt to keep the water warm based on the
          * OccupiedHeatingSetpoint attribute of the associated Thermostat cluster.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1.2
          */
         Manual = 16385,
 
@@ -265,7 +265,7 @@ export declare namespace WaterHeaterMode {
          * While in modes with this tag, the device will attempt to keep the water warm based on the Schedules attribute
          * of the associated Thermostat cluster.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.6.7.1.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.6.7.1.3
          */
         Timed = 16386
     }
@@ -273,7 +273,7 @@ export declare namespace WaterHeaterMode {
     /**
      * A Mode Tag is meant to be interpreted by the client for the purpose the cluster serves.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 1.10.5.1
+     * @see {@link MatterSpecification.v16.Cluster} § 1.10.5.1
      */
     export class ModeTagStruct {
         constructor(values?: Partial<ModeTagStruct>);
@@ -289,7 +289,7 @@ export declare namespace WaterHeaterMode {
          * whose purpose is to choose the amount of sugar, or in a cluster whose purpose is to choose the amount of
          * salt.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 1.10.5.1.1
+         * @see {@link MatterSpecification.v16.Cluster} § 1.10.5.1.1
          */
         mfgCode?: VendorId;
 
@@ -297,7 +297,7 @@ export declare namespace WaterHeaterMode {
          * This field shall indicate the mode tag within a mode tag namespace which is either manufacturer specific or
          * standard.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 1.10.5.1.2
+         * @see {@link MatterSpecification.v16.Cluster} § 1.10.5.1.2
          */
         value: ModeTag | ModeBase.ModeTag;
     }

package/dist/esm/clusters/water-tank-level-monitoring.d.ts

@@ -27,7 +27,7 @@ export declare namespace WaterTankLevelMonitoring {
     export const name: "WaterTankLevelMonitoring";
 
     /**
-     * The cluster revision assigned by {@link MatterSpecification.v151.Cluster}.
+     * The cluster revision assigned by {@link MatterSpecification.v16.Cluster}.
      */
     export const revision: 1;
 
@@ -46,7 +46,7 @@ export declare namespace WaterTankLevelMonitoring {
          * This attribute shall be populated with a value from ChangeIndicationEnum that is indicative of the current
          * requirement to change the resource.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.3
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.3
          */
         changeIndication: ResourceMonitoring.ChangeIndication;
 
@@ -54,7 +54,7 @@ export declare namespace WaterTankLevelMonitoring {
          * Indicates whether a resource is currently installed. A value of true shall indicate that a resource is
          * installed. A value of false shall indicate that a resource is not installed.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.4
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.4
          */
         inPlaceIndicator?: boolean;
 
@@ -62,7 +62,7 @@ export declare namespace WaterTankLevelMonitoring {
          * This attribute may indicates the time at which the resource has been changed, if supported by the server. The
          * attribute shall be null if it was never set or is unknown.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.5
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.5
          */
         lastChangedTime?: number | null;
     }
@@ -74,7 +74,7 @@ export declare namespace WaterTankLevelMonitoring {
         /**
          * Indicates the current condition of the resource in percent.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.1
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.1
          */
         condition: number;
 
@@ -82,7 +82,7 @@ export declare namespace WaterTankLevelMonitoring {
          * Indicates the direction of change for the condition of the resource over time, which helps to determine
          * whether a higher or lower condition value is considered optimal.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.2
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.2
          */
         degradationDirection: ResourceMonitoring.DegradationDirection;
     }
@@ -95,7 +95,7 @@ export declare namespace WaterTankLevelMonitoring {
          * Indicates the list of supported products that may be used as replacements for the current resource. Each item
          * in this list represents a unique ReplacementProductStruct.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.6
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.6
          */
         replacementProductList: ResourceMonitoring.ReplacementProduct[];
     }
@@ -111,7 +111,7 @@ export declare namespace WaterTankLevelMonitoring {
          * This attribute shall be populated with a value from ChangeIndicationEnum that is indicative of the current
          * requirement to change the resource.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.3
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.3
          */
         changeIndication: ResourceMonitoring.ChangeIndication;
 
@@ -119,7 +119,7 @@ export declare namespace WaterTankLevelMonitoring {
          * Indicates whether a resource is currently installed. A value of true shall indicate that a resource is
          * installed. A value of false shall indicate that a resource is not installed.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.4
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.4
          */
         inPlaceIndicator: boolean;
 
@@ -127,14 +127,14 @@ export declare namespace WaterTankLevelMonitoring {
          * This attribute may indicates the time at which the resource has been changed, if supported by the server. The
          * attribute shall be null if it was never set or is unknown.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.5
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.5
          */
         lastChangedTime: number | null;
 
         /**
          * Indicates the current condition of the resource in percent.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.1
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.1
          */
         condition: number;
 
@@ -142,7 +142,7 @@ export declare namespace WaterTankLevelMonitoring {
          * Indicates the direction of change for the condition of the resource over time, which helps to determine
          * whether a higher or lower condition value is considered optimal.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.2
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.2
          */
         degradationDirection: ResourceMonitoring.DegradationDirection;
 
@@ -150,7 +150,7 @@ export declare namespace WaterTankLevelMonitoring {
          * Indicates the list of supported products that may be used as replacements for the current resource. Each item
          * in this list represents a unique ReplacementProductStruct.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.6.6
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.6.6
          */
         replacementProductList: ResourceMonitoring.ReplacementProduct[];
     }
@@ -165,7 +165,7 @@ export declare namespace WaterTankLevelMonitoring {
          * LastChangedTime to be updated automatically based on the clock of the server, if the server supports setting
          * the attribute.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 2.8.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 2.8.7.1
          */
         resetCondition(): MaybePromise;
     }
@@ -185,7 +185,7 @@ export declare namespace WaterTankLevelMonitoring {
     /**
      * These are optional features supported by WaterTankLevelMonitoringCluster.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 2.8.4
+     * @see {@link MatterSpecification.v16.Cluster} § 2.8.4
      */
     export enum Feature {
         /**