@matter/types 0.17.4 → 0.17.5-alpha.0-20260704-9ea70abfa

package/dist/esm/clusters/energy-evse.d.ts

@@ -45,7 +45,7 @@ import type { MaybePromise, Bytes } from "@matter/general";
  * (e.g. a weak Wi-Fi signal). It also allows for a charging profile to be pre-configured, in case there is a temporary
  * communications loss during a charging session.
  *
- * @see {@link MatterSpecification.v151.Cluster} § 9.3
+ * @see {@link MatterSpecification.v16.Cluster} § 9.3
  */
 export declare namespace EnergyEvse {
     /**
@@ -59,7 +59,7 @@ export declare namespace EnergyEvse {
     export const name: "EnergyEvse";
 
     /**
-     * The cluster revision assigned by {@link MatterSpecification.v151.Cluster}.
+     * The cluster revision assigned by {@link MatterSpecification.v16.Cluster}.
      */
     export const revision: 4;
 
@@ -90,14 +90,14 @@ export declare namespace EnergyEvse {
          *
          * A null value shall indicate that the state cannot be determined.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.1
          */
         state: State | null;
 
         /**
          * Indicates whether the EV is currently allowed to charge from or discharge to the EVSE.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.2
          */
         supplyState: SupplyState;
 
@@ -108,7 +108,7 @@ export declare namespace EnergyEvse {
          * FaultStateEnum, except NoError. For all values of SupplyState other than DisabledError, the FaultState
          * attribute shall be NoError.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.3
          */
         faultState: FaultState;
 
@@ -123,7 +123,7 @@ export declare namespace EnergyEvse {
          * This attribute shall be persisted, for example a temporary power failure should not stop the vehicle from
          * being charged.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.4
          */
         chargingEnabledUntil: number | null;
 
@@ -132,7 +132,7 @@ export declare namespace EnergyEvse {
          * implementation of a self-managed network of EVSEs. It is assumed that the device will allow the setting of
          * such values by an installer.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.6
          */
         circuitCapacity: number | bigint;
 
@@ -141,7 +141,7 @@ export declare namespace EnergyEvse {
          *
          * The attribute can be set using the EnableCharging command.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.7
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.7
          */
         minimumChargeCurrent: number | bigint;
 
@@ -161,22 +161,22 @@ export declare namespace EnergyEvse {
          *   CableAssemblyCurrentLimit (detected by the EVSE when the cable is plugged in) - MaximumChargeCurrent field
          *   in the EnableCharging command - UserMaximumChargeCurrent attribute
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.8
          */
         maximumChargeCurrent: number | bigint;
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8
          */
         sessionId: number | null;
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8
          */
         sessionDuration: number | null;
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8
          */
         sessionEnergyCharged: number | bigint | null;
 
@@ -193,7 +193,7 @@ export declare namespace EnergyEvse {
          * Its default value SHOULD be initialized to the same as the CircuitCapacity attribute. This value shall be
          * persisted across reboots to ensure it does not cause charging issues during temporary power failures.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.10
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.10
          */
         userMaximumChargeCurrent?: number | bigint;
 
@@ -208,7 +208,7 @@ export declare namespace EnergyEvse {
          * starting at 00:30, then the EVSE must compute a random delay between 0-599s and add this to its initial
          * planned start time.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.11
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.11
          */
         randomizationDelayWindow?: number;
     }
@@ -228,7 +228,7 @@ export declare namespace EnergyEvse {
          * This attribute shall be persisted, for example a temporary power failure should not stop the vehicle from
          * being discharged.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.5
          */
         dischargingEnabledUntil: number | null;
 
@@ -243,12 +243,12 @@ export declare namespace EnergyEvse {
          *   CableAssemblyCurrentLimit (detected by the EVSE when the cable is plugged in) - MaximumDischargeCurrent
          *   field in the EnableDischarging command
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.9
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.9
          */
         maximumDischargeCurrent: number | bigint;
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8
          */
         sessionEnergyDischarged: number | bigint | null;
     }
@@ -264,7 +264,7 @@ export declare namespace EnergyEvse {
          * A null value indicates that there is no scheduled charging (for example, the EVSE Mode is set to use Manual
          * mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is enabled.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.12
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.12
          */
         nextChargeStartTime: number | null;
 
@@ -275,7 +275,7 @@ export declare namespace EnergyEvse {
          * A null value indicates that there is no scheduled charging (for example, the EVSE Mode is set to use Manual
          * mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is enabled.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.13
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.13
          */
         nextChargeTargetTime: number | null;
 
@@ -287,7 +287,7 @@ export declare namespace EnergyEvse {
          * mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is enabled, or
          * that the next ChargingTargetStruct is using the TargetSoC value to charge the vehicle.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.14
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.14
          */
         nextChargeRequiredEnergy: number | bigint | null;
 
@@ -300,7 +300,7 @@ export declare namespace EnergyEvse {
          *
          * If the SOC feature is not supported, only the values null and 100% are supported.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.15
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.15
          */
         nextChargeTargetSoC: number | null;
 
@@ -323,7 +323,7 @@ export declare namespace EnergyEvse {
          *   10,000 x 4800 / 1,000,000 = 48 km AddedRange (Miles) = AddedEnergy (Wh) x ApproxEVEfficiency (km/kWh x
          *   1000) x 0.6213 = 29.82 Miles
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.16
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.16
          */
         approximateEvEfficiency?: number | null;
     }
@@ -337,14 +337,14 @@ export declare namespace EnergyEvse {
          * is only available on EVSEs which can read the state of charge from the vehicle and that support the SOC
          * feature. If the StateOfCharge cannot be read from the vehicle it shall be returned with a NULL value.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.17
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.17
          */
         stateOfCharge: number | null;
 
         /**
          * Indicates the capacity of the EV battery in mWh. This value is always positive.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.18
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.18
          */
         batteryCapacity: number | bigint | null;
     }
@@ -361,7 +361,7 @@ export declare namespace EnergyEvse {
          *
          * A null value shall indicate that this is unknown.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.19
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.19
          */
         vehicleId: string | null;
     }
@@ -389,14 +389,14 @@ export declare namespace EnergyEvse {
          *
          * A null value shall indicate that the state cannot be determined.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.1
          */
         state: State | null;
 
         /**
          * Indicates whether the EV is currently allowed to charge from or discharge to the EVSE.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.2
          */
         supplyState: SupplyState;
 
@@ -407,7 +407,7 @@ export declare namespace EnergyEvse {
          * FaultStateEnum, except NoError. For all values of SupplyState other than DisabledError, the FaultState
          * attribute shall be NoError.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.3
          */
         faultState: FaultState;
 
@@ -422,7 +422,7 @@ export declare namespace EnergyEvse {
          * This attribute shall be persisted, for example a temporary power failure should not stop the vehicle from
          * being charged.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.4
          */
         chargingEnabledUntil: number | null;
 
@@ -431,7 +431,7 @@ export declare namespace EnergyEvse {
          * implementation of a self-managed network of EVSEs. It is assumed that the device will allow the setting of
          * such values by an installer.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.6
          */
         circuitCapacity: number | bigint;
 
@@ -440,7 +440,7 @@ export declare namespace EnergyEvse {
          *
          * The attribute can be set using the EnableCharging command.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.7
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.7
          */
         minimumChargeCurrent: number | bigint;
 
@@ -460,22 +460,22 @@ export declare namespace EnergyEvse {
          *   CableAssemblyCurrentLimit (detected by the EVSE when the cable is plugged in) - MaximumChargeCurrent field
          *   in the EnableCharging command - UserMaximumChargeCurrent attribute
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.8
          */
         maximumChargeCurrent: number | bigint;
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8
          */
         sessionId: number | null;
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8
          */
         sessionDuration: number | null;
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8
          */
         sessionEnergyCharged: number | bigint | null;
 
@@ -492,7 +492,7 @@ export declare namespace EnergyEvse {
          * Its default value SHOULD be initialized to the same as the CircuitCapacity attribute. This value shall be
          * persisted across reboots to ensure it does not cause charging issues during temporary power failures.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.10
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.10
          */
         userMaximumChargeCurrent: number | bigint;
 
@@ -507,7 +507,7 @@ export declare namespace EnergyEvse {
          * starting at 00:30, then the EVSE must compute a random delay between 0-599s and add this to its initial
          * planned start time.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.11
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.11
          */
         randomizationDelayWindow: number;
 
@@ -522,7 +522,7 @@ export declare namespace EnergyEvse {
          * This attribute shall be persisted, for example a temporary power failure should not stop the vehicle from
          * being discharged.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.5
          */
         dischargingEnabledUntil: number | null;
 
@@ -537,12 +537,12 @@ export declare namespace EnergyEvse {
          *   CableAssemblyCurrentLimit (detected by the EVSE when the cable is plugged in) - MaximumDischargeCurrent
          *   field in the EnableDischarging command
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.9
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.9
          */
         maximumDischargeCurrent: number | bigint;
 
         /**
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8
          */
         sessionEnergyDischarged: number | bigint | null;
 
@@ -553,7 +553,7 @@ export declare namespace EnergyEvse {
          * A null value indicates that there is no scheduled charging (for example, the EVSE Mode is set to use Manual
          * mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is enabled.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.12
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.12
          */
         nextChargeStartTime: number | null;
 
@@ -564,7 +564,7 @@ export declare namespace EnergyEvse {
          * A null value indicates that there is no scheduled charging (for example, the EVSE Mode is set to use Manual
          * mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is enabled.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.13
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.13
          */
         nextChargeTargetTime: number | null;
 
@@ -576,7 +576,7 @@ export declare namespace EnergyEvse {
          * mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is enabled, or
          * that the next ChargingTargetStruct is using the TargetSoC value to charge the vehicle.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.14
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.14
          */
         nextChargeRequiredEnergy: number | bigint | null;
 
@@ -589,7 +589,7 @@ export declare namespace EnergyEvse {
          *
          * If the SOC feature is not supported, only the values null and 100% are supported.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.15
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.15
          */
         nextChargeTargetSoC: number | null;
 
@@ -612,7 +612,7 @@ export declare namespace EnergyEvse {
          *   10,000 x 4800 / 1,000,000 = 48 km AddedRange (Miles) = AddedEnergy (Wh) x ApproxEVEfficiency (km/kWh x
          *   1000) x 0.6213 = 29.82 Miles
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.16
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.16
          */
         approximateEvEfficiency: number | null;
 
@@ -621,14 +621,14 @@ export declare namespace EnergyEvse {
          * is only available on EVSEs which can read the state of charge from the vehicle and that support the SOC
          * feature. If the StateOfCharge cannot be read from the vehicle it shall be returned with a NULL value.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.17
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.17
          */
         stateOfCharge: number | null;
 
         /**
          * Indicates the capacity of the EV battery in mWh. This value is always positive.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.18
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.18
          */
         batteryCapacity: number | bigint | null;
 
@@ -640,7 +640,7 @@ export declare namespace EnergyEvse {
          *
          * A null value shall indicate that this is unknown.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.8.19
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.8.19
          */
         vehicleId: string | null;
     }
@@ -652,7 +652,7 @@ export declare namespace EnergyEvse {
         /**
          * Allows a client to disable the EVSE from charging and discharging.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.1
          */
         disable(): MaybePromise;
 
@@ -660,14 +660,14 @@ export declare namespace EnergyEvse {
          * This command allows a client to enable the EVSE to charge an EV, and to provide or update the maximum and
          * minimum charge current.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.2
          */
         enableCharging(request: EnableChargingRequest): MaybePromise;
 
         /**
          * Allows a client to put the EVSE into a self-diagnostics mode.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.4
          */
         startDiagnostics(): MaybePromise;
     }
@@ -680,7 +680,7 @@ export declare namespace EnergyEvse {
          * Upon receipt, this shall allow a client to enable the discharge of an EV, and to provide or update the
          * maximum discharge current.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.3
          */
         enableDischarging(request: EnableDischargingRequest): MaybePromise;
     }
@@ -692,21 +692,21 @@ export declare namespace EnergyEvse {
         /**
          * Allows a client to set the user specified charging targets.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.5
          */
         setTargets(request: SetTargetsRequest): MaybePromise;
 
         /**
          * Allows a client to retrieve the current set of charging targets.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.6
          */
         getTargets(): MaybePromise<GetTargetsResponse>;
 
         /**
          * Allows a client to clear all stored charging targets.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.8
          */
         clearTargets(): MaybePromise;
     }
@@ -727,7 +727,7 @@ export declare namespace EnergyEvse {
         /**
          * This event shall be generated when the EV is plugged in.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.1
          */
         evConnected: EvConnectedEvent;
 
@@ -735,7 +735,7 @@ export declare namespace EnergyEvse {
          * This event shall be generated when the EV is unplugged or not detected (having been previously plugged in).
          * When the vehicle is unplugged then the session is ended.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.2
          */
         evNotDetected: EvNotDetectedEvent;
 
@@ -744,7 +744,7 @@ export declare namespace EnergyEvse {
          * between charging and discharging under the control of the PowerAdjustment feature of the Device Energy
          * Management cluster of the associated Device Energy Management device.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.3
          */
         energyTransferStarted: EnergyTransferStartedEvent;
 
@@ -753,7 +753,7 @@ export declare namespace EnergyEvse {
          * between charging and discharging under the control of the PowerAdjustment feature of the Device Energy
          * Management cluster of the associated Device Energy Management device.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.4
          */
         energyTransferStopped: EnergyTransferStoppedEvent;
 
@@ -768,7 +768,7 @@ export declare namespace EnergyEvse {
          * the EVSE device shall set the FaultState attribute to NoError and the SupplyState attribute shall be set back
          * to its previous state.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.5
          */
         fault: FaultEvent;
     }
@@ -781,7 +781,7 @@ export declare namespace EnergyEvse {
          * This event shall be generated when a RFID card has been read. This allows a controller to register the card
          * ID and use this to authenticate and start the charging session.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.6
          */
         rfid?: RfidEvent;
     }
@@ -796,7 +796,7 @@ export declare namespace EnergyEvse {
         /**
          * This event shall be generated when the EV is plugged in.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.1
          */
         evConnected: EvConnectedEvent;
 
@@ -804,7 +804,7 @@ export declare namespace EnergyEvse {
          * This event shall be generated when the EV is unplugged or not detected (having been previously plugged in).
          * When the vehicle is unplugged then the session is ended.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.2
          */
         evNotDetected: EvNotDetectedEvent;
 
@@ -813,7 +813,7 @@ export declare namespace EnergyEvse {
          * between charging and discharging under the control of the PowerAdjustment feature of the Device Energy
          * Management cluster of the associated Device Energy Management device.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.3
          */
         energyTransferStarted: EnergyTransferStartedEvent;
 
@@ -822,7 +822,7 @@ export declare namespace EnergyEvse {
          * between charging and discharging under the control of the PowerAdjustment feature of the Device Energy
          * Management cluster of the associated Device Energy Management device.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.4
          */
         energyTransferStopped: EnergyTransferStoppedEvent;
 
@@ -837,7 +837,7 @@ export declare namespace EnergyEvse {
          * the EVSE device shall set the FaultState attribute to NoError and the SupplyState attribute shall be set back
          * to its previous state.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.5
          */
         fault: FaultEvent;
 
@@ -845,7 +845,7 @@ export declare namespace EnergyEvse {
          * This event shall be generated when a RFID card has been read. This allows a controller to register the card
          * ID and use this to authenticate and start the charging session.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.6
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.6
          */
         rfid: RfidEvent;
     }
@@ -868,7 +868,7 @@ export declare namespace EnergyEvse {
     /**
      * These are optional features supported by EnergyEvseCluster.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.4
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.4
      */
     export enum Feature {
         /**
@@ -895,7 +895,7 @@ export declare namespace EnergyEvse {
          *
          * See the Device Energy Management Cluster for more details.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.4.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.4.1
          */
         ChargingPreferences = "ChargingPreferences",
 
@@ -912,7 +912,7 @@ export declare namespace EnergyEvse {
          * Note some EVSEs may use other undefined mechanisms to obtain vehicle State of Charge outside the scope of
          * this cluster.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.4.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.4.2
          */
         SoCReporting = "SoCReporting",
 
@@ -925,7 +925,7 @@ export declare namespace EnergyEvse {
          *
          * If the EVSE supports the Plug and Charge feature, it will only work if a compatible EV is connected.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.4.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.4.3
          */
         PlugAndCharge = "PlugAndCharge",
 
@@ -940,7 +940,7 @@ export declare namespace EnergyEvse {
          * subscribed to by the EVSE Management cluster client. This client may use this to enable the EV to charge or
          * discharge. The lookup and authorization of RIFD UID is outside the scope of this cluster.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.4.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.4.4
          */
         Rfid = "Rfid",
 
@@ -956,13 +956,13 @@ export declare namespace EnergyEvse {
          * minimise the energy flow from/to the grid as the demand in the home and the solar supply to the home both
          * fluctuate.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.4.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.4.5
          */
         V2X = "V2X"
     }
 
     /**
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.2
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.2
      */
     export enum State {
         /**
@@ -1002,7 +1002,7 @@ export declare namespace EnergyEvse {
     }
 
     /**
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.3
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.3
      */
     export enum SupplyState {
         /**
@@ -1038,7 +1038,7 @@ export declare namespace EnergyEvse {
     }
 
     /**
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.4
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.4
      */
     export enum FaultState {
         /**
@@ -1131,7 +1131,7 @@ export declare namespace EnergyEvse {
      * This command allows a client to enable the EVSE to charge an EV, and to provide or update the maximum and minimum
      * charge current.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.2
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.2
      */
     export class EnableChargingRequest {
         constructor(values?: Partial<EnableChargingRequest>);
@@ -1142,7 +1142,7 @@ export declare namespace EnergyEvse {
          * A value in the past in this field shall disable the EVSE charging whereas a null value shall enable it
          * permanently.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.2.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.2.1
          */
         chargingEnabledUntil: number | null;
 
@@ -1153,7 +1153,7 @@ export declare namespace EnergyEvse {
          * The value of the MinimumChargeCurrent attribute shall be set to the value of this field (see Section 9.3.8.7,
          * "MinimumChargeCurrent Attribute" for further details).
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.2.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.2.2
          */
         minimumChargeCurrent: number | bigint;
 
@@ -1165,7 +1165,7 @@ export declare namespace EnergyEvse {
          * attribute. For example, if the UserMaximumChargeCurrent attribute is adjusted below then this value, and then
          * later adjusted above this value, the resulting MaximumChargeCurrent attribute will be limited to this value.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.2.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.2.3
          */
         maximumChargeCurrent: number | bigint;
     }
@@ -1174,7 +1174,7 @@ export declare namespace EnergyEvse {
      * Upon receipt, this shall allow a client to enable the discharge of an EV, and to provide or update the maximum
      * discharge current.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.3
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.3
      */
     export class EnableDischargingRequest {
         constructor(values?: Partial<EnableDischargingRequest>);
@@ -1185,7 +1185,7 @@ export declare namespace EnergyEvse {
          * A value in the past in this field shall disable the EVSE discharging whereas a null value shall enable EVSE
          * discharging permanently.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.3.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.3.1
          */
         dischargingEnabledUntil: number | null;
 
@@ -1194,7 +1194,7 @@ export declare namespace EnergyEvse {
          * limit can be advertised to an EV in 0.6A steps. The value of the MaximumDischargeCurrent attribute shall be
          * stored and persisted across reboots by the EVSE to the value of this field.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.3.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.3.2
          */
         maximumDischargeCurrent: number | bigint;
     }
@@ -1202,7 +1202,7 @@ export declare namespace EnergyEvse {
     /**
      * Allows a client to set the user specified charging targets.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.5
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.5
      */
     export class SetTargetsRequest {
         constructor(values?: Partial<SetTargetsRequest>);
@@ -1212,7 +1212,7 @@ export declare namespace EnergyEvse {
          * days of the week. Each of the days of the week may only be included in a single ChargingTargetSchedule within
          * this list field.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.5.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.5.1
          */
         chargingTargetSchedules: ChargingTargetSchedule[];
     }
@@ -1220,7 +1220,7 @@ export declare namespace EnergyEvse {
     /**
      * The GetTargetsResponse is sent in response to the GetTargets Command.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.7
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.7
      */
     export class GetTargetsResponse {
         constructor(values?: Partial<GetTargetsResponse>);
@@ -1229,7 +1229,7 @@ export declare namespace EnergyEvse {
          * This field shall indicate a list of up to 7 sets of daily charging targets together with their associated
          * days of the week.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.9.7.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.9.7.1
          */
         chargingTargetSchedules: ChargingTargetSchedule[];
     }
@@ -1237,7 +1237,7 @@ export declare namespace EnergyEvse {
     /**
      * This event shall be generated when the EV is plugged in.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.1
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.1
      */
     export class EvConnectedEvent {
         constructor(values?: Partial<EvConnectedEvent>);
@@ -1245,7 +1245,7 @@ export declare namespace EnergyEvse {
         /**
          * This is the new session ID created after the vehicle is plugged in.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.1.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.1.1
          */
         sessionId: number;
     }
@@ -1254,7 +1254,7 @@ export declare namespace EnergyEvse {
      * This event shall be generated when the EV is unplugged or not detected (having been previously plugged in). When
      * the vehicle is unplugged then the session is ended.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.2
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.2
      */
     export class EvNotDetectedEvent {
         constructor(values?: Partial<EvNotDetectedEvent>);
@@ -1262,14 +1262,14 @@ export declare namespace EnergyEvse {
         /**
          * This field shall indicate the current value of the SessionID attribute.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.2.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.2.1
          */
         sessionId: number;
 
         /**
          * This field shall indicate the value of the State attribute prior to the EV not being detected.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.2.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.2.2
          */
         state: State;
 
@@ -1277,7 +1277,7 @@ export declare namespace EnergyEvse {
          * This field shall indicate the total duration of the session, from the start of the session when the EV was
          * plugged in, until it was unplugged.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.2.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.2.3
          */
         sessionDuration: number;
 
@@ -1287,7 +1287,7 @@ export declare namespace EnergyEvse {
          * Note that if bi-directional charging occurs during the session, then this value shall only include the sum of
          * energy transferred from the EVSE to the EV, and shall NOT be a net value of charging and discharging energy.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.2.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.2.4
          */
         sessionEnergyCharged: number | bigint;
 
@@ -1298,7 +1298,7 @@ export declare namespace EnergyEvse {
          * of energy transferred from the EV to the EVSE, and shall NOT be a net value of charging and discharging
          * energy.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.2.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.2.5
          */
         sessionEnergyDischarged?: number | bigint;
     }
@@ -1308,7 +1308,7 @@ export declare namespace EnergyEvse {
      * between charging and discharging under the control of the PowerAdjustment feature of the Device Energy Management
      * cluster of the associated Device Energy Management device.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.3
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.3
      */
     export class EnergyTransferStartedEvent {
         constructor(values?: Partial<EnergyTransferStartedEvent>);
@@ -1316,14 +1316,14 @@ export declare namespace EnergyEvse {
         /**
          * This field shall indicate the value of the SessionID attribute at the time the event was generated.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.3.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.3.1
          */
         sessionId: number;
 
         /**
          * This field shall indicate the value of the State attribute at the time the event was generated.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.3.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.3.2
          */
         state: State;
 
@@ -1333,7 +1333,7 @@ export declare namespace EnergyEvse {
          * A non-zero value indicates that the EV has been enabled for charging and the value is taken directly from the
          * MaximumChargeCurrent attribute. A zero value indicates that the EV has not been enabled for charging.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.3.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.3.3
          */
         maximumCurrent: number | bigint;
 
@@ -1344,7 +1344,7 @@ export declare namespace EnergyEvse {
          * the MaximumDischargeCurrent attribute. A zero value indicates that the EV has not been enabled for
          * discharging.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.3.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.3.4
          */
         maximumDischargeCurrent?: number | bigint;
     }
@@ -1354,7 +1354,7 @@ export declare namespace EnergyEvse {
      * between charging and discharging under the control of the PowerAdjustment feature of the Device Energy Management
      * cluster of the associated Device Energy Management device.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.4
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.4
      */
     export class EnergyTransferStoppedEvent {
         constructor(values?: Partial<EnergyTransferStoppedEvent>);
@@ -1362,21 +1362,21 @@ export declare namespace EnergyEvse {
         /**
          * This field shall indicate the value of the SessionID attribute prior to the energy transfer stopping.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.4.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.4.1
          */
         sessionId: number;
 
         /**
          * This field shall indicate the value of the State attribute prior to the energy transfer stopping.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.4.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.4.2
          */
         state: State;
 
         /**
          * This field shall indicate the reason why the energy transferred stopped.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.4.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.4.3
          */
         reason: EnergyTransferStoppedReason;
 
@@ -1384,7 +1384,7 @@ export declare namespace EnergyEvse {
          * This field shall indicate the amount of energy transferred from the EVSE to the EV since the previous
          * EnergyTransferStarted event, in mWh.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.4.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.4.4
          */
         energyTransferred: number | bigint;
 
@@ -1392,7 +1392,7 @@ export declare namespace EnergyEvse {
          * This field shall indicate the amount of energy transferred from the EV to the EVSE since the previous
          * EnergyTransferStarted event, in mWh.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.4.5
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.4.5
          */
         energyDischarged?: number | bigint;
     }
@@ -1408,7 +1408,7 @@ export declare namespace EnergyEvse {
      * EVSE device shall set the FaultState attribute to NoError and the SupplyState attribute shall be set back to its
      * previous state.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.5
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.5
      */
     export class FaultEvent {
         constructor(values?: Partial<FaultEvent>);
@@ -1417,28 +1417,28 @@ export declare namespace EnergyEvse {
          * This field shall indicate the value of the SessionID attribute prior to the Fault State being changed. A
          * value of null indicates no sessions have occurred before the fault occurred.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.5.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.5.1
          */
         sessionId: number | null;
 
         /**
          * This field shall indicate the value of the State attribute prior to the Fault State being changed.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.5.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.5.2
          */
         state: State;
 
         /**
          * This field shall indicate the value of the FaultState attribute prior to the Fault State being changed.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.5.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.5.3
          */
         faultStatePreviousState: FaultState;
 
         /**
          * This field shall indicate the current value of the FaultState attribute.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.5.4
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.5.4
          */
         faultStateCurrentState: FaultState;
     }
@@ -1447,7 +1447,7 @@ export declare namespace EnergyEvse {
      * This event shall be generated when a RFID card has been read. This allows a controller to register the card ID
      * and use this to authenticate and start the charging session.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.6
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.6
      */
     export class RfidEvent {
         constructor(values?: Partial<RfidEvent>);
@@ -1455,13 +1455,13 @@ export declare namespace EnergyEvse {
         /**
          * The UID field (ISO 14443A UID) is either 4, 7 or 10 bytes.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.10.6.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.10.6.1
          */
         uid: Bytes;
     }
 
     /**
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.1
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.1
      */
     export class TargetDayOfWeek {
         constructor(values?: Partial<TargetDayOfWeek> | number);
@@ -1503,7 +1503,7 @@ export declare namespace EnergyEvse {
     }
 
     /**
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.5
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.5
      */
     export enum EnergyTransferStoppedReason {
         /**
@@ -1537,7 +1537,7 @@ export declare namespace EnergyEvse {
      *   ChargingTime (s) = (3600 x RequiredEnergy (wH)) / Power (W) To compute the charging time: Charging StartTime =
      *   TargetTimeMinutesPastMidnight - ChargingTime
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.6
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.6
      */
     export class ChargingTarget {
         constructor(values?: Partial<ChargingTarget>);
@@ -1565,7 +1565,7 @@ export declare namespace EnergyEvse {
          * that the EVSE may need to begin charging immediately, and may not be able to guarantee that the vehicle will
          * be able to reach the target.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.6.1
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.6.1
          */
         targetTimeMinutesPastMidnight: number;
 
@@ -1591,7 +1591,7 @@ export declare namespace EnergyEvse {
          *   - if the AddedEnergy field has not been provided, the EVSE SHOULD assume the vehicle is empty and charge
          *     until the vehicle stops demanding a charge.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.6.2
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.6.2
          */
         targetSoC?: number;
 
@@ -1615,7 +1615,7 @@ export declare namespace EnergyEvse {
          *   value to the Battery Capacity of the vehicle, since the EV may also require energy for heating and cooling
          *   of the battery during charging, or for heating or cooling the cabin.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.6.3
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.6.3
          */
         addedEnergy?: number | bigint;
     }
@@ -1623,7 +1623,7 @@ export declare namespace EnergyEvse {
     /**
      * This represents a set of user specified charging targets for an EV for a set of specified days.
      *
-     * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.7
+     * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.7
      */
     export class ChargingTargetSchedule {
         constructor(values?: Partial<ChargingTargetSchedule>);
@@ -1632,14 +1632,14 @@ export declare namespace EnergyEvse {
          * This field shall indicate the days of the week that the charging targets SHOULD be associated to. This field
          * is a bitmap and therefore the associated targets could be applied to multiple days.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.8
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.8
          */
         dayOfWeekForSequence: TargetDayOfWeek;
 
         /**
          * This field shall indicate a list of up to 10 charging targets for each of the associated days of the week.
          *
-         * @see {@link MatterSpecification.v151.Cluster} § 9.3.7.9
+         * @see {@link MatterSpecification.v16.Cluster} § 9.3.7.9
          */
         chargingTargets: ChargingTarget[];
     }