@matter/types 0.16.0-alpha.0-20251104-8c3166ea3 → 0.16.0-alpha.0-20251107-6bcb5baf4

package/dist/cjs/clusters/window-covering.js

@@ -52,7 +52,7 @@ var WindowCovering;
     /**
      * This field shall specify the requested physical lift/slide position in unit cm (centimeters).
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.4.1
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.4.1
      */
     liftValue: (0, import_TlvObject.TlvField)(0, import_TlvNumber.TlvUInt16)
   });
@@ -60,7 +60,7 @@ var WindowCovering;
     /**
      * This field shall specify the requested physical tilt position in unit 0.1° (tenth of a degrees).
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.6.1
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.6.1
      */
     tiltValue: (0, import_TlvObject.TlvField)(0, import_TlvNumber.TlvUInt16)
   });
@@ -88,7 +88,7 @@ var WindowCovering;
      *
      *   • 1 = Operational
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.1
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.1.1
      */
     operational: (0, import_BitmapSchema.BitFlag)(0),
     onlineReserved: (0, import_BitmapSchema.BitFlag)(1),
@@ -101,7 +101,7 @@ var WindowCovering;
      *
      *   • 1 = Lift movement is reversed
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.2
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.1.2
      */
     liftMovementReversed: (0, import_BitmapSchema.BitFlag)(2),
     /**
@@ -113,7 +113,7 @@ var WindowCovering;
      *
      *   • 1 = Lift control is position aware (PA_LF)
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.3
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.1.3
      */
     liftPositionAware: (0, import_BitmapSchema.BitFlag)(3),
     /**
@@ -125,7 +125,7 @@ var WindowCovering;
      *
      *   • 1 = Tilt control is position aware (PA_TL)
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.4
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.1.4
      */
     tiltPositionAware: (0, import_BitmapSchema.BitFlag)(4),
     /**
@@ -138,7 +138,7 @@ var WindowCovering;
      *
      *   • 1 = Encoder Controlled
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.5
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.1.5
      */
     liftEncoderControlled: (0, import_BitmapSchema.BitFlag)(5),
     /**
@@ -151,7 +151,7 @@ var WindowCovering;
      *
      *   • 1 = Encoder Controlled
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.6
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.1.6
      */
     tiltEncoderControlled: (0, import_BitmapSchema.BitFlag)(6)
   };
@@ -162,7 +162,7 @@ var WindowCovering;
      * These bits shall indicate in which direction the covering is currently moving or if it has stopped. Global
      * operational state shall always reflect the overall motion of the device.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.3.1
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.3.1
      */
     global: (0, import_BitmapSchema.BitFieldEnum)(0, 2),
     /**
@@ -170,7 +170,7 @@ var WindowCovering;
      *
      * These bits shall indicate in which direction the covering’s lift is currently moving or if it has stopped.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.3.2
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.3.2
      */
     lift: (0, import_BitmapSchema.BitFieldEnum)(2, 2),
     /**
@@ -178,7 +178,7 @@ var WindowCovering;
      *
      * These bits shall indicate in which direction the covering’s tilt is currently moving or if it has stopped.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.3.3
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.3.3
      */
     tilt: (0, import_BitmapSchema.BitFieldEnum)(4, 2)
   };
@@ -226,7 +226,7 @@ var WindowCovering;
      *
      *   • 1 = Lift movement is reversed
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.2.1
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.2.1
      */
     motorDirectionReversed: (0, import_BitmapSchema.BitFlag)(0),
     /**
@@ -238,7 +238,7 @@ var WindowCovering;
      *
      *   • 1 = Calibration mode
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.2.2
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.2.2
      */
     calibrationMode: (0, import_BitmapSchema.BitFlag)(1),
     /**
@@ -250,7 +250,7 @@ var WindowCovering;
      *
      *   • 1 = Maintenance mode
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.2.3
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.2.3
      */
     maintenanceMode: (0, import_BitmapSchema.BitFlag)(2),
     /**
@@ -262,7 +262,7 @@ var WindowCovering;
      *
      *   • 1 = LEDs will display feedback
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.2.4
+     * @see {@link MatterSpecification.v142.Cluster} § 5.3.5.2.4
      */
     ledFeedback: (0, import_BitmapSchema.BitFlag)(3)
   };
@@ -325,28 +325,28 @@ var WindowCovering;
        * Indicates the maximum possible encoder position possible (Unit cm, centimeters) to position the height of
        * the window covering lift.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.2
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.2
        */
       physicalClosedLimitLift: (0, import_Cluster.OptionalFixedAttribute)(1, import_TlvNumber.TlvUInt16, { default: 0 }),
       /**
        * Indicates the actual lift position (Unit cm, centimeters) of the window covering from the fully-open
        * position.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.4
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.4
        */
       currentPositionLift: (0, import_Cluster.OptionalAttribute)(3, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt16), { persistent: true, default: null }),
       /**
        * Indicates the open limit for lifting the window covering whether position (in centimeters) is encoded or
        * timed.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.17
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.17
        */
       installedOpenLimitLift: (0, import_Cluster.Attribute)(16, import_TlvNumber.TlvUInt16.bound({ max: 65534 }), { persistent: true, default: 0 }),
       /**
        * Indicates the closed limit for lifting the window covering whether position (in centimeters) is encoded
        * or timed.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.18
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.18
        */
       installedClosedLimitLift: (0, import_Cluster.Attribute)(
         17,
@@ -361,28 +361,28 @@ var WindowCovering;
        * Indicates the maximum possible encoder position possible (Unit 0.1°, tenths of a degree) to position the
        * angle of the window covering tilt.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.3
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.3
        */
       physicalClosedLimitTilt: (0, import_Cluster.OptionalFixedAttribute)(2, import_TlvNumber.TlvUInt16, { default: 0 }),
       /**
        * Indicates the actual tilt position (Unit 0.1°, tenths of a degree) of the window covering from the
        * fully-open position.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.5
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.5
        */
       currentPositionTilt: (0, import_Cluster.OptionalAttribute)(4, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt16), { persistent: true, default: null }),
       /**
        * Indicates the open limit for tilting the window covering whether position (in tenth of a degree) is
        * encoded or timed.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.19
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.19
        */
       installedOpenLimitTilt: (0, import_Cluster.Attribute)(18, import_TlvNumber.TlvUInt16.bound({ max: 65534 }), { persistent: true, default: 0 }),
       /**
        * Indicates the closed limit for tilting the window covering whether position (in tenth of a degree) is
        * encoded or timed.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.20
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.20
        */
       installedClosedLimitTilt: (0, import_Cluster.Attribute)(
         19,
@@ -397,7 +397,7 @@ var WindowCovering;
        * Indicates the total number of lift/slide actuations applied to the window covering since the device was
        * installed.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.6
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.6
        */
       numberOfActuationsLift: (0, import_Cluster.OptionalAttribute)(5, import_TlvNumber.TlvUInt16, { persistent: true, default: 0 })
     },
@@ -422,7 +422,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.5
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.5
        */
       goToLiftPercentage: (0, import_Cluster.OptionalCommand)(5, WindowCovering2.TlvGoToLiftPercentageRequest, 5, import_Cluster.TlvNoResponse)
     }
@@ -433,7 +433,7 @@ var WindowCovering;
        * Indicates the total number of tilt actuations applied to the window covering since the device was
        * installed.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.7
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.7
        */
       numberOfActuationsTilt: (0, import_Cluster.OptionalAttribute)(6, import_TlvNumber.TlvUInt16, { persistent: true, default: 0 })
     },
@@ -458,7 +458,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.7
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.7
        */
       goToTiltPercentage: (0, import_Cluster.OptionalCommand)(8, WindowCovering2.TlvGoToTiltPercentageRequest, 8, import_Cluster.TlvNoResponse)
     }
@@ -469,7 +469,7 @@ var WindowCovering;
        * Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is
        * equal to CurrentPositionLiftPercent100ths attribute divided by 100.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.11
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.11
        */
       currentPositionLiftPercentage: (0, import_Cluster.OptionalAttribute)(
         8,
@@ -480,13 +480,13 @@ var WindowCovering;
        * Indicates the position where the window covering lift will go or is moving to as a percentage (Unit
        * 0.01%).
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.13
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.13
        */
       targetPositionLiftPercent100ths: (0, import_Cluster.Attribute)(11, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvPercent100ths), { default: null }),
       /**
        * Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.9
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.9
        */
       currentPositionLiftPercent100ths: (0, import_Cluster.Attribute)(
         14,
@@ -515,7 +515,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.5
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.5
        */
       goToLiftPercentage: (0, import_Cluster.Command)(5, WindowCovering2.TlvGoToLiftPercentageRequest, 5, import_Cluster.TlvNoResponse)
     }
@@ -526,7 +526,7 @@ var WindowCovering;
        * Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is
        * equal to CurrentPositionTiltPercent100ths attribute divided by 100.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.12
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.12
        */
       currentPositionTiltPercentage: (0, import_Cluster.OptionalAttribute)(
         9,
@@ -537,13 +537,13 @@ var WindowCovering;
        * Indicates the position where the window covering tilt will go or is moving to as a percentage (Unit
        * 0.01%).
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.14
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.14
        */
       targetPositionTiltPercent100ths: (0, import_Cluster.Attribute)(12, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvPercent100ths), { default: null }),
       /**
        * Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.10
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.10
        */
       currentPositionTiltPercent100ths: (0, import_Cluster.Attribute)(
         15,
@@ -572,7 +572,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.7
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.7
        */
       goToTiltPercentage: (0, import_Cluster.Command)(8, WindowCovering2.TlvGoToTiltPercentageRequest, 8, import_Cluster.TlvNoResponse)
     }
@@ -583,7 +583,7 @@ var WindowCovering;
        * This command is used to set the target lift position of the window covering to the value specified in the
        * command.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.4
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.4
        */
       goToLiftValue: (0, import_Cluster.OptionalCommand)(4, WindowCovering2.TlvGoToLiftValueRequest, 4, import_Cluster.TlvNoResponse)
     }
@@ -594,7 +594,7 @@ var WindowCovering;
        * This command is used to set the target tilt position of the window covering to the value specified in the
        * command.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.6
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.6
        */
       goToTiltValue: (0, import_Cluster.OptionalCommand)(7, WindowCovering2.TlvGoToTiltValueRequest, 7, import_Cluster.TlvNoResponse)
     }
@@ -609,13 +609,13 @@ var WindowCovering;
        * is lift Open and Close) or slide left to right (e.g. for a sliding curtain, Left and Right is lift Open
        * and Close).
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.4.1
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.4.1
        */
       lift: (0, import_BitmapSchema.BitFlag)(0),
       /**
        * The Tilt feature applies to window coverings with vertical or horizontal strips.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.4.2
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.4.2
        */
       tilt: (0, import_BitmapSchema.BitFlag)(1),
       /**
@@ -629,7 +629,7 @@ var WindowCovering;
        * As a general rule, absolute positioning (in centimeters or tenth of a degrees) SHOULD NOT be supported
        * for new implementations.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.4.4
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.4.4
        */
       absolutePosition: (0, import_BitmapSchema.BitFlag)(3),
       /**
@@ -649,7 +649,7 @@ var WindowCovering;
        *
        * If the window covering supports both the LF and TL features, the following types are allowed to be used:
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.1
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.1
        */
       type: (0, import_Cluster.FixedAttribute)(0, (0, import_TlvNumber.TlvEnum)(), { default: 0 /* Rollershade */ }),
       /**
@@ -658,13 +658,13 @@ var WindowCovering;
        * To change settings, devices shall write to the Mode attribute. The behavior causing the setting or
        * clearing of each bit is vendor specific.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.8
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.8
        */
       configStatus: (0, import_Cluster.Attribute)(7, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, WindowCovering2.ConfigStatus), { persistent: true }),
       /**
        * Indicates the currently ongoing operations and applies to all type of devices.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.15
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.15
        */
       operationalStatus: (0, import_Cluster.Attribute)(10, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, WindowCovering2.OperationalStatus)),
       /**
@@ -681,7 +681,7 @@ var WindowCovering;
        *
        * The table below helps to match the EndProductType attribute with the Type attribute.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.16
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.16
        */
       endProductType: (0, import_Cluster.FixedAttribute)(13, (0, import_TlvNumber.TlvEnum)(), { default: 0 /* RollerShade */ }),
       /**
@@ -694,7 +694,7 @@ var WindowCovering;
        * write interaction to the Mode attribute, with an unsupported mode bit or any out of bounds bits set, must
        * be ignored and a response containing the status of CONSTRAINT_ERROR will be returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.21
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.21
        */
       mode: (0, import_Cluster.WritableAttribute)(
         23,
@@ -706,7 +706,7 @@ var WindowCovering;
        * movements. By default for nominal operation all flags are cleared (0). A device might support none, one
        * or several bit flags from this attribute (all optional).
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.22
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.6.22
        */
       safetyStatus: (0, import_Cluster.OptionalAttribute)(26, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt16, WindowCovering2.SafetyStatus))
     },
@@ -741,7 +741,7 @@ var WindowCovering;
        *
        *   • CurrentPositionTilt attribute shall be equal to the InstalledOpenLimitTilt attribute.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.1
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.1
        */
       upOrOpen: (0, import_Cluster.Command)(0, import_TlvNoArguments.TlvNoArguments, 0, import_Cluster.TlvNoResponse),
       /**
@@ -774,7 +774,7 @@ var WindowCovering;
        *
        *   • CurrentPositionTilt attribute shall be equal to the InstalledClosedLimitTilt attribute.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.2
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.2
        */
       downOrClose: (0, import_Cluster.Command)(1, import_TlvNoArguments.TlvNoArguments, 1, import_Cluster.TlvNoResponse),
       /**
@@ -787,7 +787,7 @@ var WindowCovering;
        *   • TargetPositionTiltPercent100ths attribute will be set to CurrentPositionTiltPercent100ths attribute
        *     value.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.3
+       * @see {@link MatterSpecification.v142.Cluster} § 5.3.7.3
        */
       stopMotion: (0, import_Cluster.Command)(2, import_TlvNoArguments.TlvNoArguments, 2, import_Cluster.TlvNoResponse)
     },

package/dist/cjs/dcl/operational-certificate.d.ts

@@ -51,6 +51,12 @@ export interface OperationalCertificateDclSchema {
      * (RCAC).
      */
     isRoot: boolean;
+    /**
+     * This field SHALL indicate whether the associated certificate is a Vendor Verification Signer Certificate
+     * (VVSC) used to sign vid_verification_statement messages as defined in Section 6.4.10, “Fabric
+     * Table Vendor ID Verification Procedure”.
+     */
+    isVidVerificationSigner: boolean;
     /**
      * This field uniquely identifies the DCL key that was used to register the certificate in DCL, pursuant
      * to DCL policies.
@@ -72,7 +78,8 @@ export interface OperationalCertificateDclSchema {
     vid: number;
     /**
      * The SchemaVersion field value history for this schema is provided below:
-     * * ???
+     * * 0 Initial Release
+     * * 1 Introduction of IsVidVerificationSigner
      */
     schemaVersion: number;
 }

package/dist/cjs/dcl/operational-certificate.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"operational-certificate.d.ts","sourceRoot":"","sources":["../../../src/dcl/operational-certificate.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH;;;GAGG;AACH,MAAM,WAAW,+BAA+B;IAC5C;;;;OAIG;IACH,OAAO,EAAE,MAAM,CAAC;IAEhB;;;;;OAKG;IACH,YAAY,EAAE,MAAM,CAAC;IAErB;;;;OAIG;IACH,MAAM,CAAC,EAAE,MAAM,CAAC;IAEhB;;;;OAIG;IACH,cAAc,CAAC,EAAE,MAAM,CAAC;IAExB;;;;OAIG;IACH,WAAW,CAAC,EAAE,MAAM,CAAC;IAErB;;;;;OAKG;IACH,gBAAgB,CAAC,EAAE,MAAM,CAAC;IAE1B;;;OAGG;IACH,MAAM,EAAE,OAAO,CAAC;IAEhB;;;OAGG;IACH,KAAK,EAAE,MAAM,CAAC;IAEd;;;OAGG;IACH,OAAO,EAAE,MAAM,CAAC;IAEhB;;;OAGG;IACH,YAAY,EAAE,MAAM,CAAC;IAErB;;OAEG;IACH,GAAG,EAAE,MAAM,CAAC;IAEZ;;;OAGG;IACH,aAAa,EAAE,MAAM,CAAC;CACzB"}
+{"version":3,"file":"operational-certificate.d.ts","sourceRoot":"","sources":["../../../src/dcl/operational-certificate.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH;;;GAGG;AACH,MAAM,WAAW,+BAA+B;IAC5C;;;;OAIG;IACH,OAAO,EAAE,MAAM,CAAC;IAEhB;;;;;OAKG;IACH,YAAY,EAAE,MAAM,CAAC;IAErB;;;;OAIG;IACH,MAAM,CAAC,EAAE,MAAM,CAAC;IAEhB;;;;OAIG;IACH,cAAc,CAAC,EAAE,MAAM,CAAC;IAExB;;;;OAIG;IACH,WAAW,CAAC,EAAE,MAAM,CAAC;IAErB;;;;;OAKG;IACH,gBAAgB,CAAC,EAAE,MAAM,CAAC;IAE1B;;;OAGG;IACH,MAAM,EAAE,OAAO,CAAC;IAEhB;;;;OAIG;IACH,uBAAuB,EAAE,OAAO,CAAC;IAEjC;;;OAGG;IACH,KAAK,EAAE,MAAM,CAAC;IAEd;;;OAGG;IACH,OAAO,EAAE,MAAM,CAAC;IAEhB;;;OAGG;IACH,YAAY,EAAE,MAAM,CAAC;IAErB;;OAEG;IACH,GAAG,EAAE,MAAM,CAAC;IAEZ;;;;OAIG;IACH,aAAa,EAAE,MAAM,CAAC;CACzB"}

package/dist/cjs/globals/AtomicAttributeStatus.d.ts

@@ -8,26 +8,26 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
 /**
  * This struct indicates the status of an attribute during an atomic write.
  *
- * @see {@link MatterSpecification.v141.Core} § 7.15.5
+ * @see {@link MatterSpecification.v142.Core} § 7.15.5
  */
 export declare const TlvAtomicAttributeStatus: import("../tlv/TlvObject.js").ObjectSchema<{
     /**
      * This field shall indicate the ID of the attribute with the associated StatusCode.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.15.5.1
+     * @see {@link MatterSpecification.v142.Core} § 7.15.5.1
      */
     attributeId: import("../tlv/TlvObject.js").FieldType<import("../datatype/AttributeId.js").AttributeId>;
     /**
      * This field shall indicate the atomic status of an attribute.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.15.5.2
+     * @see {@link MatterSpecification.v142.Core} § 7.15.5.2
      */
     statusCode: import("../tlv/TlvObject.js").FieldType<Status>;
 }>;
 /**
  * This struct indicates the status of an attribute during an atomic write.
  *
- * @see {@link MatterSpecification.v141.Core} § 7.15.5
+ * @see {@link MatterSpecification.v142.Core} § 7.15.5
  */
 export interface AtomicAttributeStatus extends TypeFromSchema<typeof TlvAtomicAttributeStatus> {
 }

package/dist/cjs/globals/AtomicAttributeStatus.js

@@ -33,13 +33,13 @@ const TlvAtomicAttributeStatus = (0, import_TlvObject.TlvObject)({
   /**
    * This field shall indicate the ID of the attribute with the associated StatusCode.
    *
-   * @see {@link MatterSpecification.v141.Core} § 7.15.5.1
+   * @see {@link MatterSpecification.v142.Core} § 7.15.5.1
    */
   attributeId: (0, import_TlvObject.TlvField)(0, import_AttributeId.TlvAttributeId),
   /**
    * This field shall indicate the atomic status of an attribute.
    *
-   * @see {@link MatterSpecification.v141.Core} § 7.15.5.2
+   * @see {@link MatterSpecification.v142.Core} § 7.15.5.2
    */
   statusCode: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvEnum)())
 });

package/dist/cjs/globals/AtomicRequestType.d.ts

@@ -5,7 +5,7 @@
  */
 /*** THIS FILE IS GENERATED, DO NOT EDIT ***/
 /**
- * @see {@link MatterSpecification.v141.Core} § 7.15.4
+ * @see {@link MatterSpecification.v142.Core} § 7.15.4
  */
 export declare enum AtomicRequestType {
     /**

package/dist/cjs/globals/Currency.d.ts

@@ -9,7 +9,7 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  *
  * This data type represents a currency with an associated number of decimal points.
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.51
+ * @see {@link MatterSpecification.v142.Core} § 7.19.2.51
  */
 export declare const TlvCurrency: import("../tlv/TlvObject.js").ObjectSchema<{
     currency: import("../tlv/TlvObject.js").FieldType<number>;
@@ -20,7 +20,7 @@ export declare const TlvCurrency: import("../tlv/TlvObject.js").ObjectSchema<{
  *
  * This data type represents a currency with an associated number of decimal points.
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.51
+ * @see {@link MatterSpecification.v142.Core} § 7.19.2.51
  */
 export interface Currency extends TypeFromSchema<typeof TlvCurrency> {
 }

package/dist/cjs/globals/Locationdesc.d.ts

@@ -9,7 +9,7 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  *
  * This data type shall be represented by the following structure:
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.49
+ * @see {@link MatterSpecification.v142.Core} § 7.19.2.49
  */
 export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema<{
     /**
@@ -19,7 +19,7 @@ export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema
      * synthesized user-friendly, understandable, names for the location, rather than opaque values such as "private" or
      * "2fe7c241-a50a-4863-896e-c5878da5ed68".
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.1
+     * @see {@link MatterSpecification.v142.Core} § 7.19.2.49.1
      */
     locationName: import("../tlv/TlvObject.js").FieldType<string>;
     /**
@@ -49,7 +49,7 @@ export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema
      * > Handling complex level situations, such as half levels (side split houses), or the levels from an apartment
      *   building, is up to the client and/or user.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.2
+     * @see {@link MatterSpecification.v142.Core} § 7.19.2.49.2
      */
     floorNumber: import("../tlv/TlvObject.js").FieldType<number | null>;
     /**
@@ -63,7 +63,7 @@ export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema
      * > This field only indicates the type of the area. Multiple areas of the same type, such as bedrooms, may exist in
      *   a user’s home.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.3
+     * @see {@link MatterSpecification.v142.Core} § 7.19.2.49.3
      */
     areaType: import("../tlv/TlvObject.js").FieldType<number | null>;
 }>;
@@ -72,7 +72,7 @@ export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema
  *
  * This data type shall be represented by the following structure:
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.49
+ * @see {@link MatterSpecification.v142.Core} § 7.19.2.49
  */
 export interface Locationdesc extends TypeFromSchema<typeof TlvLocationdesc> {
 }

package/dist/cjs/globals/Locationdesc.js

@@ -38,7 +38,7 @@ const TlvLocationdesc = (0, import_TlvObject.TlvObject)({
    * synthesized user-friendly, understandable, names for the location, rather than opaque values such as "private" or
    * "2fe7c241-a50a-4863-896e-c5878da5ed68".
    *
-   * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.1
+   * @see {@link MatterSpecification.v142.Core} § 7.19.2.49.1
    */
   locationName: (0, import_TlvObject.TlvField)(0, import_TlvString.TlvString.bound({ maxLength: 128 })),
   /**
@@ -68,7 +68,7 @@ const TlvLocationdesc = (0, import_TlvObject.TlvObject)({
    * > Handling complex level situations, such as half levels (side split houses), or the levels from an apartment
    *   building, is up to the client and/or user.
    *
-   * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.2
+   * @see {@link MatterSpecification.v142.Core} § 7.19.2.49.2
    */
   floorNumber: (0, import_TlvObject.TlvField)(1, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16)),
   /**
@@ -82,7 +82,7 @@ const TlvLocationdesc = (0, import_TlvObject.TlvObject)({
    * > This field only indicates the type of the area. Multiple areas of the same type, such as bedrooms, may exist in
    *   a user’s home.
    *
-   * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.3
+   * @see {@link MatterSpecification.v142.Core} § 7.19.2.49.3
    */
   areaType: (0, import_TlvObject.TlvField)(2, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8))
 });

package/dist/cjs/globals/MeasurementAccuracy.d.ts

@@ -9,20 +9,20 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  * This struct represents the set of accuracy ranges for a given measurement, the maximum and minimum values for the
  * measurement, and whether the measurement is directly measured or just estimated from other information.
  *
- * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3
+ * @see {@link MatterSpecification.v142.Cluster} § 2.1.3.3
  */
 export declare const TlvMeasurementAccuracy: import("../tlv/TlvObject.js").ObjectSchema<{
     /**
      * This field shall indicate the type of measurement for the accuracy provided.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.1
+     * @see {@link MatterSpecification.v142.Cluster} § 2.1.3.3.1
      */
     measurementType: import("../tlv/TlvObject.js").FieldType<MeasurementType>;
     /**
      * This field shall indicate whether the associated measurement was directly measured. If this field is not set to
      * true, then the associated measurement was estimated.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.2
+     * @see {@link MatterSpecification.v142.Cluster} § 2.1.3.3.2
      */
     measured: import("../tlv/TlvObject.js").FieldType<boolean>;
     minMeasuredValue: import("../tlv/TlvObject.js").FieldType<number | bigint>;
@@ -40,7 +40,7 @@ export declare const TlvMeasurementAccuracy: import("../tlv/TlvObject.js").Objec
      * one more the value of the RangeMax field on the previous MeasurementAccuracyRangeStruct in this list (i.e. there
      * shall be no gaps in the accuracy ranges, and the ranges shall be in increasing order).
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.5
+     * @see {@link MatterSpecification.v142.Cluster} § 2.1.3.3.5
      */
     accuracyRanges: import("../tlv/TlvObject.js").FieldType<import("../tlv/TlvObject.js").TypeFromFields<{
         rangeMin: import("../tlv/TlvObject.js").FieldType<number | bigint>;
@@ -57,7 +57,7 @@ export declare const TlvMeasurementAccuracy: import("../tlv/TlvObject.js").Objec
  * This struct represents the set of accuracy ranges for a given measurement, the maximum and minimum values for the
  * measurement, and whether the measurement is directly measured or just estimated from other information.
  *
- * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3
+ * @see {@link MatterSpecification.v142.Cluster} § 2.1.3.3
  */
 export interface MeasurementAccuracy extends TypeFromSchema<typeof TlvMeasurementAccuracy> {
 }

package/dist/cjs/globals/MeasurementAccuracy.js

@@ -35,14 +35,14 @@ const TlvMeasurementAccuracy = (0, import_TlvObject.TlvObject)({
   /**
    * This field shall indicate the type of measurement for the accuracy provided.
    *
-   * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.1
+   * @see {@link MatterSpecification.v142.Cluster} § 2.1.3.3.1
    */
   measurementType: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvEnum)()),
   /**
    * This field shall indicate whether the associated measurement was directly measured. If this field is not set to
    * true, then the associated measurement was estimated.
    *
-   * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.2
+   * @see {@link MatterSpecification.v142.Cluster} § 2.1.3.3.2
    */
   measured: (0, import_TlvObject.TlvField)(1, import_TlvBoolean.TlvBoolean),
   minMeasuredValue: (0, import_TlvObject.TlvField)(2, import_TlvNumber.TlvInt64),
@@ -60,7 +60,7 @@ const TlvMeasurementAccuracy = (0, import_TlvObject.TlvObject)({
    * one more the value of the RangeMax field on the previous MeasurementAccuracyRangeStruct in this list (i.e. there
    * shall be no gaps in the accuracy ranges, and the ranges shall be in increasing order).
    *
-   * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.5
+   * @see {@link MatterSpecification.v142.Cluster} § 2.1.3.3.5
    */
   accuracyRanges: (0, import_TlvObject.TlvField)(4, (0, import_TlvArray.TlvArray)(import_MeasurementAccuracyRange.TlvMeasurementAccuracyRange, { minLength: 1 }))
 });