@matter/types 0.16.0-alpha.0-20251104-8c3166ea3 → 0.16.0-alpha.0-20251107-6bcb5baf4

package/dist/cjs/clusters/thermostat.js

@@ -61,7 +61,7 @@ var Thermostat;
      * If this bit is set, it shall indicate the occupied state else if the bit if not set, it shall indicate the
      * unoccupied state.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.6.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.6.1
      */
     occupied: (0, import_BitmapSchema.BitFlag)(0)
   };
@@ -131,19 +131,19 @@ var Thermostat;
      * be represented by a 16 bits unsigned integer to designate the minutes since midnight. For example, 6am will
      * be represented by 360 minutes since midnight and 11:30pm will be represented by 1410 minutes since midnight.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.29.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.29.1
      */
     transitionTime: (0, import_TlvObject.TlvField)(0, import_TlvNumber.TlvUInt16.bound({ max: 1439 })),
     /**
      * This field shall represent the heat setpoint to be applied at this associated transition start time.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.29.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.29.2
      */
     heatSetpoint: (0, import_TlvObject.TlvField)(1, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16)),
     /**
      * This field shall represent the cool setpoint to be applied at this associated transition start time.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.29.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.29.3
      */
     coolSetpoint: (0, import_TlvObject.TlvField)(2, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16))
   });
@@ -153,7 +153,7 @@ var Thermostat;
      * device supports more than 10 transitions in its schedule they can send this by sending more than 1 “Set
      * Weekly Schedule” command, each containing the separate information that the device needs to set.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.2.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.2.1
      */
     numberOfTransitionsForSequence: (0, import_TlvObject.TlvField)(0, import_TlvNumber.TlvUInt8),
     /**
@@ -165,7 +165,7 @@ var Thermostat;
      * Each setpoint transition will begin with the day of week for this transition. There can be up to 10
      * transitions for each command.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.2.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.2.2
      */
     dayOfWeekForSequence: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
     /**
@@ -189,13 +189,13 @@ var Thermostat;
      * Both bits must be respected, even if the HEAT or COOL feature is not supported, to ensure the command is
      * decoded and handled correctly.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.2.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.2.3
      */
     modeForSequence: (0, import_TlvObject.TlvField)(2, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleMode)),
     /**
      * This field shall contain the list of setpoint transitions used to update the specified daily schedules
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.2.4
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.2.4
      */
     transitions: (0, import_TlvObject.TlvField)(3, (0, import_TlvArray.TlvArray)(Thermostat2.TlvWeeklyScheduleTransition, { maxLength: 10 }))
   });
@@ -204,14 +204,14 @@ var Thermostat;
      * This field shall indicate the number of days the client would like to return the setpoint values for and
      * could be any combination of single days or the entire week.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.3.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.3.1
      */
     daysToReturn: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
     /**
      * This field shall indicate the mode the client would like to return the set point values for and could be any
      * combination of heat only, cool only or heat & cool.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.3.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.3.2
      */
     modeToReturn: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleMode))
   });
@@ -245,19 +245,19 @@ var Thermostat;
     /**
      * This field shall specify a PresetScenarioEnum value supported by this thermostat.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.28.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.28.1
      */
     presetScenario: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvEnum)()),
     /**
      * This field shall specify a limit for the number of presets for this PresetScenarioEnum.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.28.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.28.2
      */
     numberOfPresets: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvUInt8),
     /**
      * This field shall specify a bitmap of features for this PresetTypeStruct.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.28.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.28.3
      */
     presetTypeFeatures: (0, import_TlvObject.TlvField)(2, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt16, Thermostat2.PresetTypeFeatures))
   });
@@ -269,13 +269,13 @@ var Thermostat;
      * This field shall only be null when the encompassing PresetStruct is appended to the Presets attribute for the
      * purpose of creating a new Preset. Refer to Presets for the creation of Preset handles.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.27.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.27.1
      */
     presetHandle: (0, import_TlvObject.TlvField)(0, (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvByteString.bound({ maxLength: 16 }))),
     /**
      * This field shall indicate the associated PresetScenarioEnum value for this preset.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.27.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.27.2
      */
     presetScenario: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvEnum)()),
     /**
@@ -284,28 +284,28 @@ var Thermostat;
      * Within each subset of presets sharing the same PresetScenario field value, there shall NOT be any presets
      * with the same value, including null as a value, in the Name field.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.27.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.27.3
      */
     name: (0, import_TlvObject.TlvOptionalField)(2, (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvString.bound({ maxLength: 64 }))),
     /**
      * This field shall indicate the cooling setpoint for the preset. Refer to Setpoint Limits for value
      * constraints.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.27.4
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.27.4
      */
     coolingSetpoint: (0, import_TlvObject.TlvOptionalField)(3, import_TlvNumber.TlvInt16),
     /**
      * This field shall indicate the heating setpoint for the preset. Refer to Setpoint Limits for value
      * constraints.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.27.5
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.27.5
      */
     heatingSetpoint: (0, import_TlvObject.TlvOptionalField)(4, import_TlvNumber.TlvInt16),
     /**
      * This field shall indicate whether the preset is marked as "built-in", meaning that it can be modified, but it
      * cannot be deleted.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.27.6
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.27.6
      */
     builtIn: (0, import_TlvObject.TlvField)(5, (0, import_TlvNullable.TlvNullable)(import_TlvBoolean.TlvBoolean))
   });
@@ -314,7 +314,7 @@ var Thermostat;
      * This field shall specify the value of the PresetHandle field on the PresetStruct to be made active. If the
      * field is set to null, that indicates there should be no active preset.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.9.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.9.1
      */
     presetHandle: (0, import_TlvObject.TlvField)(0, (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvByteString.bound({ maxLength: 16 })))
   });
@@ -338,7 +338,7 @@ var Thermostat;
      * field on the encompassing ScheduleTypeStruct supports specifying presets on ScheduleTransitionStructs
      * contained in its Transitions field.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.11.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.11.1
      */
     supportsPresets: (0, import_BitmapSchema.BitFlag)(0),
     /**
@@ -348,7 +348,7 @@ var Thermostat;
      * field on the encompassing ScheduleTypeStruct supports specifying setpoints on ScheduleTransitionStructs
      * contained in its Transitions field.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.11.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.11.2
      */
     supportsSetpoints: (0, import_BitmapSchema.BitFlag)(1),
     /**
@@ -357,7 +357,7 @@ var Thermostat;
      * This bit shall indicate that any ScheduleStruct with a SystemMode field whose value matches the SystemMode
      * field on the encompassing ScheduleTypeStruct supports setting the value of the Name field.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.11.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.11.3
      */
     supportsNames: (0, import_BitmapSchema.BitFlag)(2),
     /**
@@ -366,7 +366,7 @@ var Thermostat;
      * This bit shall indicate that any ScheduleStruct with a SystemMode field whose value matches the SystemMode
      * field on the encompassing ScheduleTypeStruct supports setting its SystemMode field to Off.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.11.4
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.11.4
      */
     supportsOff: (0, import_BitmapSchema.BitFlag)(3)
   };
@@ -375,20 +375,20 @@ var Thermostat;
      * This field shall specify a SystemModeEnum supported by this thermostat for Schedules. The only valid values
      * for this field shall be Auto, Heat, and Cool.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.32.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.32.1
      */
     systemMode: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvEnum)()),
     /**
      * This field shall specify a limit for the number of Schedules for this SystemMode.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.32.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.32.2
      */
     numberOfSchedules: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvUInt8),
     /**
      * This field shall specify a bitmap of features for this schedule entry. At least one of SupportsPresets and
      * SupportsSetpoints shall be set.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.32.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.32.3
      */
     scheduleTypeFeatures: (0, import_TlvObject.TlvField)(2, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt16, Thermostat2.ScheduleTypeFeatures))
   });
@@ -397,7 +397,7 @@ var Thermostat;
      * This field shall specify a bitmask of days of the week that the transition applies to. The Vacation bit shall
      * NOT be set; vacation schedules shall be set via the vacation preset.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.31.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.31.1
      */
     dayOfWeek: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
     /**
@@ -406,14 +406,14 @@ var Thermostat;
      *
      * Handling of transitions during the changeover of Daylight Saving Time is implementation-dependent.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.31.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.31.2
      */
     transitionTime: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvUInt16.bound({ max: 1439 })),
     /**
      * This field shall specify the preset used at the TransitionTime. If this field is provided, then the
      * SystemMode, CoolingSetpoint and HeatingSetpoint fields shall NOT be provided.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.31.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.31.3
      */
     presetHandle: (0, import_TlvObject.TlvOptionalField)(2, import_TlvString.TlvByteString.bound({ maxLength: 16 })),
     /**
@@ -421,21 +421,21 @@ var Thermostat;
      * default for the schedule. The only valid values for this field shall be Auto, Heat, Cool and Off. This field
      * shall only be included when the required system mode differs from the schedule’s default SystemMode.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.31.4
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.31.4
      */
     systemMode: (0, import_TlvObject.TlvOptionalField)(3, (0, import_TlvNumber.TlvEnum)()),
     /**
      * This field shall specify the cooling setpoint for the transition. If PresetHandle is set, this field shall
      * NOT be included. Refer to Setpoint Limits for value constraints.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.31.5
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.31.5
      */
     coolingSetpoint: (0, import_TlvObject.TlvOptionalField)(4, import_TlvNumber.TlvInt16),
     /**
      * This field shall specify the cooling setpoint for the transition. If PresetHandle is set, this field shall
      * NOT be included. Refer to Setpoint Limits for value constraints.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.31.6
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.31.6
      */
     heatingSetpoint: (0, import_TlvObject.TlvOptionalField)(5, import_TlvNumber.TlvInt16)
   });
@@ -447,26 +447,26 @@ var Thermostat;
      * This field shall only be null when the encompassing ScheduleStruct is appended to the Schedules attribute for
      * the purpose of creating a new Schedule. Refer to Schedules for the creation of Schedule handles.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.30.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.30.1
      */
     scheduleHandle: (0, import_TlvObject.TlvField)(0, (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvByteString.bound({ maxLength: 16 }))),
     /**
      * This field shall specify the default thermostat system mode for transitions in this schedule. The only valid
      * values for this field shall be Auto, Heat, and Cool.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.30.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.30.2
      */
     systemMode: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvEnum)()),
     /**
      * This field shall specify a name for the ScheduleStruct.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.30.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.30.3
      */
     name: (0, import_TlvObject.TlvOptionalField)(2, import_TlvString.TlvString.bound({ maxLength: 64 })),
     /**
      * This field shall indicate the default PresetHandle value for transitions in this schedule.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.30.4
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.30.4
      */
     presetHandle: (0, import_TlvObject.TlvOptionalField)(3, import_TlvString.TlvByteString.bound({ maxLength: 16 })),
     /**
@@ -497,14 +497,14 @@ var Thermostat;
      * ScheduleTransitionStruct with the largest TransitionTime field from the set of ScheduleTransitionStructs
      * whose DayOfWeek field matches the current day of the week.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.30.5
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.30.5
      */
     transitions: (0, import_TlvObject.TlvField)(4, (0, import_TlvArray.TlvArray)(Thermostat2.TlvScheduleTransition, { minLength: 1 })),
     /**
      * This field shall indicate whether the schedule is marked as "built-in", meaning that it can be modified, but
      * it cannot be deleted.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.30.6
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.30.6
      */
     builtIn: (0, import_TlvObject.TlvField)(5, (0, import_TlvNullable.TlvNullable)(import_TlvBoolean.TlvBoolean))
   });
@@ -512,7 +512,7 @@ var Thermostat;
     /**
      * This field shall specify the value of the ScheduleHandle field on the ScheduleStruct to be made active.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.8.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.8.1
      */
     scheduleHandle: (0, import_TlvObject.TlvField)(0, import_TlvString.TlvByteString.bound({ maxLength: 16 }))
   });
@@ -530,7 +530,7 @@ var Thermostat;
      *
      *   • 11 = Reserved
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.5.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.5.1
      */
     coolingStage: (0, import_BitmapSchema.BitField)(0, 2),
     /**
@@ -546,7 +546,7 @@ var Thermostat;
      *
      *   • 11 = Reserved
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.5.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.5.2
      */
     heatingStage: (0, import_BitmapSchema.BitField)(2, 2),
     /**
@@ -558,7 +558,7 @@ var Thermostat;
      *
      *   • 1 = Heat Pump
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.5.3
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.5.3
      */
     heatingIsHeatPump: (0, import_BitmapSchema.BitFlag)(4),
     /**
@@ -570,7 +570,7 @@ var Thermostat;
      *
      *   • 1 = Uses fuel
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.8.5.4
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.8.5.4
      */
     heatingUsesFuel: (0, import_BitmapSchema.BitFlag)(5)
   };
@@ -718,14 +718,14 @@ var Thermostat;
     /**
      * The field shall specify which setpoints are to be adjusted.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.1.1
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.1.1
      */
     mode: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvEnum)()),
     /**
      * This field shall indicate the amount (possibly negative) that should be added to the setpoint(s), in steps of
      * 0.1°C.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.1.2
+     * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.1.2
      */
     amount: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvInt8)
   });
@@ -755,7 +755,7 @@ var Thermostat;
        * Indicates whether the heated/cooled space is occupied or not, as measured locally or remotely (over the
        * network).
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.4
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.4
        */
       occupancy: (0, import_Cluster.Attribute)(
         2,
@@ -772,11 +772,11 @@ var Thermostat;
        *
        * ### Refer to Setpoint Limits for constraints
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.5
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.5
        */
       absMinHeatSetpointLimit: (0, import_Cluster.OptionalFixedAttribute)(3, import_TlvNumber.TlvInt16, { default: 700 }),
       /**
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9
        */
       absMaxHeatSetpointLimit: (0, import_Cluster.OptionalFixedAttribute)(4, import_TlvNumber.TlvInt16, { default: 3e3 }),
       /**
@@ -785,7 +785,7 @@ var Thermostat;
        *
        * This attribute is reported regularly and may be used to control a heating device.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.10
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.10
        */
       piHeatingDemand: (0, import_Cluster.OptionalAttribute)(8, import_TlvNumber.TlvUInt8.bound({ max: 100 })),
       /**
@@ -805,7 +805,7 @@ var Thermostat;
        * either does not support the OCC feature or the Occupied bit is set on the Occupancy attribute, the value
        * of the ActivePresetHandle attribute shall be set to null.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.14
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.14
        */
       occupiedHeatingSetpoint: (0, import_Cluster.WritableAttribute)(18, import_TlvNumber.TlvInt16, { persistent: true, default: 2e3 }),
       /**
@@ -821,7 +821,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.17
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.17
        */
       minHeatSetpointLimit: (0, import_Cluster.OptionalWritableAttribute)(
         21,
@@ -837,7 +837,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.18
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.18
        */
       maxHeatSetpointLimit: (0, import_Cluster.OptionalWritableAttribute)(
         22,
@@ -849,7 +849,7 @@ var Thermostat;
   Thermostat2.CoolingComponent = import_MutableCluster.MutableCluster.Component({
     attributes: {
       /**
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9
        */
       absMinCoolSetpointLimit: (0, import_Cluster.OptionalFixedAttribute)(5, import_TlvNumber.TlvInt16, { default: 1600 }),
       /**
@@ -858,7 +858,7 @@ var Thermostat;
        *
        * ### Refer to Setpoint Limits for constraints
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.8
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.8
        */
       absMaxCoolSetpointLimit: (0, import_Cluster.OptionalFixedAttribute)(6, import_TlvNumber.TlvInt16, { default: 3200 }),
       /**
@@ -867,7 +867,7 @@ var Thermostat;
        *
        * This attribute is reported regularly and may be used to control a cooling device.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.9
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.9
        */
       piCoolingDemand: (0, import_Cluster.OptionalAttribute)(7, import_TlvNumber.TlvUInt8.bound({ max: 100 })),
       /**
@@ -887,7 +887,7 @@ var Thermostat;
        * either does not support the OCC feature or the Occupied bit is set on the Occupancy attribute, the value
        * of the ActivePresetHandle attribute shall be set to null.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.13
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.13
        */
       occupiedCoolingSetpoint: (0, import_Cluster.WritableAttribute)(17, import_TlvNumber.TlvInt16, { persistent: true, default: 2600 }),
       /**
@@ -899,7 +899,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.19
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.19
        */
       minCoolSetpointLimit: (0, import_Cluster.OptionalWritableAttribute)(
         23,
@@ -915,7 +915,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.20
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.20
        */
       maxCoolSetpointLimit: (0, import_Cluster.OptionalWritableAttribute)(
         24,
@@ -943,7 +943,7 @@ var Thermostat;
        * > Prior to revision 8 of this cluster specification the value of this attribute was constrained to a
        *   range of -2.5°C to 2.5°C.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.12
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.12
        */
       localTemperatureCalibration: (0, import_Cluster.OptionalWritableAttribute)(
         16,
@@ -971,7 +971,7 @@ var Thermostat;
        * Occupied bit is not set on the Occupancy attribute, the value of the ActivePresetHandle attribute shall
        * be set to null.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.15
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.15
        */
       unoccupiedCoolingSetpoint: (0, import_Cluster.WritableAttribute)(19, import_TlvNumber.TlvInt16, { persistent: true, default: 2600 })
     }
@@ -996,7 +996,7 @@ var Thermostat;
        * Occupied bit is not set on the Occupancy attribute, the value of the ActivePresetHandle attribute shall
        * be set to null.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.16
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.16
        */
       unoccupiedHeatingSetpoint: (0, import_Cluster.WritableAttribute)(20, import_TlvNumber.TlvInt16, { persistent: true, default: 2e3 })
     }
@@ -1017,7 +1017,7 @@ var Thermostat;
        * For backwards compatibility, this attribute is optionally writeable. However any writes to this attribute
        * shall be silently ignored.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.21
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.21
        */
       minSetpointDeadBand: (0, import_Cluster.WritableAttribute)(
         25,
@@ -1029,7 +1029,7 @@ var Thermostat;
        * can only be Off, Cool or Heat. This attribute is intended to provide additional information when the
        * thermostat’s system mode is in auto mode.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.25
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.25
        */
       thermostatRunningMode: (0, import_Cluster.OptionalAttribute)(
         30,
@@ -1047,19 +1047,19 @@ var Thermostat;
        * This attribute may be able to be used as the base to determine if the device supports weekly scheduling
        * by reading the attribute. Successful response means that the weekly scheduling is supported.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.26
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.26
        */
       startOfWeek: (0, import_Cluster.FixedAttribute)(32, (0, import_TlvNumber.TlvEnum)()),
       /**
        * Indicates how many weekly schedule transitions the thermostat is capable of handling.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.27
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.27
        */
       numberOfWeeklyTransitions: (0, import_Cluster.FixedAttribute)(33, import_TlvNumber.TlvUInt8, { default: 0 }),
       /**
        * Indicates how many daily schedule transitions the thermostat is capable of handling.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.28
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.28
        */
       numberOfDailyTransitions: (0, import_Cluster.FixedAttribute)(34, import_TlvNumber.TlvUInt8, { default: 0 })
     },
@@ -1073,7 +1073,7 @@ var Thermostat;
        * leave all other days unchanged. If the schedule is larger than what fits in one frame or contains more
        * than 10 transitions, the schedule shall then be sent using multiple SetWeeklySchedule Commands.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.2
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.2
        */
       setWeeklySchedule: (0, import_Cluster.Command)(
         1,
@@ -1083,7 +1083,7 @@ var Thermostat;
         { invokeAcl: import_model.AccessLevel.Manage }
       ),
       /**
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.3
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.3
        */
       getWeeklySchedule: (0, import_Cluster.Command)(2, Thermostat2.TlvGetWeeklyScheduleRequest, 0, Thermostat2.TlvGetWeeklyScheduleResponse),
       /**
@@ -1092,7 +1092,7 @@ var Thermostat;
        * Upon receipt, all transitions currently stored shall be cleared and a default response of SUCCESS shall
        * be sent in response. There are no error responses to this command.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.5
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.5
        */
       clearWeeklySchedule: (0, import_Cluster.Command)(3, import_TlvNoArguments.TlvNoArguments, 3, import_Cluster.TlvNoResponse, { invokeAcl: import_model.AccessLevel.Manage })
     }
@@ -1120,7 +1120,7 @@ var Thermostat;
        * Thermostat server shall set its OccupiedSetback value to OccupiedSetbackMin and shall send a Write
        * Attribute Response command with a Status Code field enumeration of SUCCESS response.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.36
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.36
        */
       occupiedSetback: (0, import_Cluster.WritableAttribute)(
         52,
@@ -1133,7 +1133,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.37
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.37
        */
       occupiedSetbackMin: (0, import_Cluster.FixedAttribute)(53, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8), { default: null }),
       /**
@@ -1142,7 +1142,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.38
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.38
        */
       occupiedSetbackMax: (0, import_Cluster.FixedAttribute)(54, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8.bound({ max: 254 })), { default: null })
     }
@@ -1171,7 +1171,7 @@ var Thermostat;
        * the Thermostat server shall set its UnoccupiedSetback value to UnoccupiedSetbackMin and shall send a
        * Write Attribute Response command with a Status Code field enumeration of SUCCESS response.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.39
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.39
        */
       unoccupiedSetback: (0, import_Cluster.WritableAttribute)(
         55,
@@ -1184,7 +1184,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.40
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.40
        */
       unoccupiedSetbackMin: (0, import_Cluster.FixedAttribute)(56, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8), { default: null }),
       /**
@@ -1193,7 +1193,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.41
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.41
        */
       unoccupiedSetbackMax: (0, import_Cluster.FixedAttribute)(57, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8.bound({ max: 254 })), { default: null })
     }
@@ -1204,20 +1204,20 @@ var Thermostat;
        * Indicates the supported PresetScenarioEnum values, limits on how many presets can be created for each
        * PresetScenarioEnum, and whether or not a thermostat can transition automatically to a given scenario.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.51
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.51
        */
       presetTypes: (0, import_Cluster.FixedAttribute)(72, (0, import_TlvArray.TlvArray)(Thermostat2.TlvPresetType), { default: [] }),
       /**
        * Indicates the maximum number of entries supported by the Presets attribute.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.53
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.53
        */
       numberOfPresets: (0, import_Cluster.FixedAttribute)(74, import_TlvNumber.TlvUInt8, { default: 0 }),
       /**
        * Indicates the PresetHandle of the active preset. If this attribute is null, then there is no active
        * preset.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.57
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.57
        */
       activePresetHandle: (0, import_Cluster.Attribute)(
         78,
@@ -1296,7 +1296,7 @@ var Thermostat;
        *
        *   2. Otherwise, the attribute status shall be SUCCESS.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.59
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.59
        */
       presets: (0, import_Cluster.WritableAttribute)(
         80,
@@ -1306,7 +1306,7 @@ var Thermostat;
     },
     commands: {
       /**
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.9
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.9
        */
       setActivePresetRequest: (0, import_Cluster.Command)(6, Thermostat2.TlvSetActivePresetRequest, 6, import_Cluster.TlvNoResponse)
     }
@@ -1318,30 +1318,30 @@ var Thermostat;
        * each SystemMode value, and whether or not a given SystemMode value supports transitions to Presets,
        * target setpoints, or both.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.52
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.52
        */
       scheduleTypes: (0, import_Cluster.FixedAttribute)(73, (0, import_TlvArray.TlvArray)(Thermostat2.TlvScheduleType), { default: [] }),
       /**
        * Indicates the maximum number of entries supported by the Schedules attribute.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.54
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.54
        */
       numberOfSchedules: (0, import_Cluster.FixedAttribute)(75, import_TlvNumber.TlvUInt8, { default: 0 }),
       /**
        * Indicates the maximum number of transitions per Schedules attribute entry.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.55
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.55
        */
       numberOfScheduleTransitions: (0, import_Cluster.FixedAttribute)(76, import_TlvNumber.TlvUInt8, { default: 0 }),
       /**
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9
        */
       numberOfScheduleTransitionPerDay: (0, import_Cluster.FixedAttribute)(77, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8), { default: null }),
       /**
        * Indicates the ScheduleHandle of the active schedule. A null value in this attribute indicates that there
        * is no active schedule.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.58
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.58
        */
       activeScheduleHandle: (0, import_Cluster.Attribute)(
         79,
@@ -1456,7 +1456,7 @@ var Thermostat;
        *
        *   2. Otherwise, the attribute status shall be SUCCESS.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.60
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.60
        */
       schedules: (0, import_Cluster.WritableAttribute)(
         81,
@@ -1466,7 +1466,7 @@ var Thermostat;
     },
     commands: {
       /**
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.8
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.8
        */
       setActiveScheduleRequest: (0, import_Cluster.Command)(5, Thermostat2.TlvSetActiveScheduleRequest, 5, import_Cluster.TlvNoResponse)
     }
@@ -1505,14 +1505,14 @@ var Thermostat;
        * externally, for example due to the temperature control being done by a separate subsystem which does not
        * offer a view into the currently measured temperature, but allows setpoints to be provided.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.4.1
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.4.1
        */
       localTemperatureNotExposed: (0, import_BitmapSchema.BitFlag)(6),
       /**
        * This feature indicates that the thermostat is capable of schedules. If this feature is supported, the
        * thermostat shall support a mechanism to do time synchronization.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.4.2
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.4.2
        */
       matterScheduleConfiguration: (0, import_BitmapSchema.BitFlag)(7),
       /**
@@ -1534,13 +1534,13 @@ var Thermostat;
        *   • Otherwise, if the LTNE feature is supported, there is no feedback externally available for the
        *     LocalTemperatureCalibration. In that case, the LocalTemperature attribute shall always report null.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.2
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.2
        */
       localTemperature: (0, import_Cluster.Attribute)(0, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16)),
       /**
        * Indicates the outdoor temperature, as measured locally or remotely (over the network).
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.3
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.3
        */
       outdoorTemperature: (0, import_Cluster.OptionalAttribute)(1, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16), { default: null }),
       /**
@@ -1549,7 +1549,7 @@ var Thermostat;
        * parameters are set via software, there shall be read/write access in order to provide remote programming
        * capability.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.11
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.11
        * @deprecated
        */
       hvacSystemTypeConfiguration: (0, import_Cluster.OptionalWritableAttribute)(
@@ -1567,7 +1567,7 @@ var Thermostat;
        * If the LocalTemperature RemoteSensing bit is written with a value of 1 when the LTNE feature is present,
        * the write shall fail and the server shall report a CONSTRAINT_ERROR.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.22
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.22
        */
       remoteSensing: (0, import_Cluster.OptionalWritableAttribute)(
         26,
@@ -1582,7 +1582,7 @@ var Thermostat;
        * value of this attribute shall remain unchanged. This behavior is in place for backwards compatibility
        * with existing thermostats.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.23
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.23
        */
       controlSequenceOfOperation: (0, import_Cluster.WritableAttribute)(
         27,
@@ -1593,7 +1593,7 @@ var Thermostat;
        * Indicates the current operating mode of the thermostat. Its value shall be limited by the
        * ControlSequenceOfOperation attribute.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.24
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.24
        */
       systemMode: (0, import_Cluster.WritableAttribute)(
         28,
@@ -1618,7 +1618,7 @@ var Thermostat;
        * If this attribute is updated to SetpointHoldOff and the SetpointHoldExpiryTimestamp is supported, the
        * server shall set the SetpointHoldExpiryTimestamp to null.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.29
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.29
        */
       temperatureSetpointHold: (0, import_Cluster.OptionalWritableAttribute)(
         35,
@@ -1637,7 +1637,7 @@ var Thermostat;
        * If this attribute is set to null and the SetpointHoldExpiryTimestamp is supported, the server shall set
        * the SetpointHoldExpiryTimestamp to null.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.30
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.30
        */
       temperatureSetpointHoldDuration: (0, import_Cluster.OptionalWritableAttribute)(
         36,
@@ -1662,7 +1662,7 @@ var Thermostat;
        * > Modifying the ScheduleActive bit does not clear or delete previous weekly schedule programming
        *   configurations.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.31
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.31
        */
       thermostatProgrammingOperationMode: (0, import_Cluster.OptionalWritableAttribute)(
         37,
@@ -1673,7 +1673,7 @@ var Thermostat;
        * Indicates the current relay state of the heat, cool, and fan relays. Unimplemented outputs shall be
        * treated as if they were Off.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.32
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.32
        */
       thermostatRunningState: (0, import_Cluster.OptionalAttribute)(41, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt16, Thermostat2.RelayState)),
       /**
@@ -1685,7 +1685,7 @@ var Thermostat;
        * provider). Because automation services may initiate frequent setpoint changes, this attribute clearly
        * differentiates the source of setpoint changes made at the thermostat.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.33
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.33
        */
       setpointChangeSource: (0, import_Cluster.OptionalAttribute)(
         48,
@@ -1699,13 +1699,13 @@ var Thermostat;
        *
        * The null value indicates that the previous setpoint was unknown.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.34
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.34
        */
       setpointChangeAmount: (0, import_Cluster.OptionalAttribute)(49, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16), { default: null }),
       /**
        * Indicates the time in UTC at which the SetpointChangeAmount attribute change was recorded.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.35
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.35
        */
       setpointChangeSourceTimestamp: (0, import_Cluster.OptionalAttribute)(50, import_TlvNumber.TlvEpochS, { default: 0 }),
       /**
@@ -1734,7 +1734,7 @@ var Thermostat;
        * when a setpoint is of a specified amount greater than the measured temperature. This allows the heated
        * space to be quickly heated to the desired level set by the user.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.42
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.42
        */
       emergencyHeatDelta: (0, import_Cluster.OptionalWritableAttribute)(
         58,
@@ -1745,7 +1745,7 @@ var Thermostat;
        * Indicates the type of Mini Split ACTypeEnum of Mini Split AC is defined depending on how Cooling and
        * Heating condition is achieved by Mini Split AC.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.43
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.43
        */
       acType: (0, import_Cluster.OptionalWritableAttribute)(
         64,
@@ -1755,7 +1755,7 @@ var Thermostat;
       /**
        * Indicates capacity of Mini Split AC in terms of the format defined by the ACCapacityFormat attribute
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.44
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.44
        */
       acCapacity: (0, import_Cluster.OptionalWritableAttribute)(
         65,
@@ -1765,7 +1765,7 @@ var Thermostat;
       /**
        * Indicates type of refrigerant used within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.45
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.45
        */
       acRefrigerantType: (0, import_Cluster.OptionalWritableAttribute)(
         66,
@@ -1775,7 +1775,7 @@ var Thermostat;
       /**
        * Indicates the type of compressor used within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.46
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.46
        */
       acCompressorType: (0, import_Cluster.OptionalWritableAttribute)(
         67,
@@ -1785,7 +1785,7 @@ var Thermostat;
       /**
        * Indicates the type of errors encountered within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.47
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.47
        */
       acErrorCode: (0, import_Cluster.OptionalWritableAttribute)(
         68,
@@ -1795,7 +1795,7 @@ var Thermostat;
       /**
        * Indicates the position of Louver on the AC.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.48
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.48
        */
       acLouverPosition: (0, import_Cluster.OptionalWritableAttribute)(
         69,
@@ -1805,13 +1805,13 @@ var Thermostat;
       /**
        * Indicates the temperature of the AC coil, as measured locally or remotely (over the network).
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.49
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.49
        */
       acCoilTemperature: (0, import_Cluster.OptionalAttribute)(70, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16), { default: null }),
       /**
        * Indicates the format for the ACCapacity attribute.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.50
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.50
        */
       acCapacityFormat: (0, import_Cluster.OptionalWritableAttribute)(
         71,
@@ -1830,7 +1830,7 @@ var Thermostat;
        * If the TemperatureSetpointHold is set to SetpointHoldOff, this attribute shall be set to null indicating
        * there is no hold on the Thermostat.
        *
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.9.61
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.9.61
        */
       setpointHoldExpiryTimestamp: (0, import_Cluster.OptionalAttribute)(
         82,
@@ -1840,7 +1840,7 @@ var Thermostat;
     },
     commands: {
       /**
-       * @see {@link MatterSpecification.v141.Cluster} § 4.3.10.1
+       * @see {@link MatterSpecification.v142.Cluster} § 4.3.10.1
        */
       setpointRaiseLower: (0, import_Cluster.Command)(0, Thermostat2.TlvSetpointRaiseLowerRequest, 0, import_Cluster.TlvNoResponse),
       atomicRequest: (0, import_Cluster.Command)(254, Thermostat2.TlvAtomicRequest, 253, Thermostat2.TlvAtomicResponse)