@matter/types 0.13.1-alpha.0-20250508-047aa0277 → 0.13.1-alpha.0-20250511-74ef153aa

package/src/clusters/ota-software-update-provider.ts

@@ -106,10 +106,9 @@ export namespace OtaSoftwareUpdateProvider {
         hardwareVersion: TlvOptionalField(4, TlvUInt16),
 
         /**
-         * The location, if present, shall provide the same value as the Basic Information Cluster Location
-         *
-         * attribute for the OTA Requestor as configured. This may be used by the OTA Provider logic to allow per-region
-         * selection of the Software Image.
+         * The location, if present, shall provide the same value as the Basic Information Cluster Location attribute
+         * for the OTA Requestor as configured. This may be used by the OTA Provider logic to allow per-region selection
+         * of the Software Image.
          *
          * @see {@link MatterSpecification.v14.Core} § 11.20.6.5.1.6
          */
@@ -147,8 +146,6 @@ export namespace OtaSoftwareUpdateProvider {
          * whereby strictly correct additional MetadataForProvider is expected to fulfill the OTA Software Update
          * process.
          *
-         * Usage of the QueryImage Command
-         *
          * OTA Requestors shall send a QueryImage command to the OTA Provider to determine the availability of a new
          * Software Image.
          *
@@ -415,13 +412,9 @@ export namespace OtaSoftwareUpdateProvider {
          * Software Image which the OTA Requestor is ready to start applying. The OTA Provider may use this new version
          * to track or record Software Image application by OTA Requestors.
          *
-         * When Generated
-         *
          * The ApplyUpdateRequest Command shall be invoked by an OTA Requestor once it is ready to apply a previously
          * downloaded Software Image.
          *
-         * Effect on Receipt
-         *
          * Upon receipt of this command the OTA Provider shall respond with an Action field consistent with the next
          * action the OTA Requestor should take, including any possible time delay.
          *
@@ -432,8 +425,6 @@ export namespace OtaSoftwareUpdateProvider {
          * See Section 11.20.3.6, “Applying a software update” for a description of the flow in response to an OTA
          * Provider receiving an invocation of this command.
          *
-         * Handling Error Cases
-         *
          * See Section 11.20.3.6, “Applying a software update” for all error-handling information.
          *
          * @see {@link MatterSpecification.v14.Core} § 11.20.6.5.3.2
@@ -518,8 +509,6 @@ export namespace OtaSoftwareUpdateProvider {
          * attribute in the invoking OTA Requestor’s Basic Information Cluster, and SHOULD be consistent with the value
          * representing a new version running on the Node invoking the command.
          *
-         * When Generated
-         *
          * The NotifyUpdateApplied command SHOULD be invoked in the following two circumstances:
          *
          *   1. An OTA Requestor has just successfully applied a Software Image it had obtained from a previous
@@ -536,8 +525,6 @@ export namespace OtaSoftwareUpdateProvider {
          * This command shall be considered optional and shall NOT result in reduced availability of the OTA Provider
          * functionality if OTA Requestors never invoke this command.
          *
-         * Effect on Receipt
-         *
          * An OTA Provider receiving an invocation of this command may log it internally.
          *
          * On receiving this command, an OTA Provider may use the information to update its bookkeeping of cached

package/src/clusters/ota-software-update-requestor.ts

@@ -245,8 +245,6 @@ export namespace OtaSoftwareUpdateRequestor {
          * Provider cluster server on the ProviderNodeID. This is provided to avoid having to do discovery of the
          * location of that endpoint by walking over all endpoints and checking their Descriptor Cluster.
          *
-         * When Generated
-         *
          * An OTA Provider may invoke this command directly to an OTA Requestor, to announce its presence as an OTA
          * Provider on the Fabric.
          *
@@ -255,11 +253,12 @@ export namespace OtaSoftwareUpdateRequestor {
          * UrgentUpdateAvailable, in which case this command may be more frequent.
          *
          * Any invocation shall be made with a delay of at least 1 second between invocations from a given OTA Provider,
-         * to reduce burden on the networking infrastructure and affect a form of serialized jitter. It is recommended
-         * to offset the first announcement of a round (i.e. new set of announcements after a previous complete set) by
-         * a random delay time with a distribution span of >= 60 seconds to jitter announcement schedules over time.
+         * to reduce burden on the networking infrastructure and affect a form of serialized
+         *
+         * jitter. It is recommended to offset the first announcement of a round (i.e. new set of announcements after a
+         * previous complete set) by a random delay time with a distribution span of
          *
-         * Effect on Receipt
+         * >= 60 seconds to jitter announcement schedules over time.
          *
          * On receipt of this command, an OTA Requestor SHOULD consider the new ProviderNodeID and AnnouncementReason to
          * possibly query for new software sooner than it would have with its default behavior.
@@ -524,7 +523,7 @@ export namespace OtaSoftwareUpdateRequestor {
              *
              * A value of 0 shall indicate that the beginning has occurred. A value of 100 shall indicate completion.
              *
-             * This field may be updated infrequently. Some care SHOULD be taken by Nodes to avoid over- reporting
+             * This field may be updated infrequently. Some care SHOULD be taken by Nodes to avoid over-reporting
              * progress when this attribute is part of a subscription.
              *
              * @see {@link MatterSpecification.v14.Core} § 11.20.7.5.4

package/src/clusters/oven-cavity-operational-state.ts

@@ -63,10 +63,9 @@ export namespace OvenCavityOperationalState {
 
             /**
              * This attribute represents the current phase of operation being performed by the server. This shall be the
-             * positional index representing the value from the set provided in the PhaseList Attribute,
-             *
-             * where the first item in that list is an index of 0. Thus, this attribute shall have a maximum value that
-             * is "length(PhaseList) - 1".
+             * positional index representing the value from the set provided in the PhaseList Attribute, where the first
+             * item in that list is an index of 0. Thus, this attribute shall have a maximum value that is
+             * "length(PhaseList) - 1".
              *
              * Null if the PhaseList attribute is null or if the PhaseList attribute is an empty list.
              *

package/src/clusters/oven-mode.ts

@@ -196,59 +196,9 @@ export namespace OvenMode {
      * @see {@link MatterSpecification.v14.Cluster} § 8.11.5.1
      */
     export const TlvModeOption = TlvObject({
-        /**
-         * This field shall indicate readable text that describes the mode option, so that a client can provide it to
-         * the user to indicate what this option means. This field is meant to be readable and understandable by the
-         * user.
-         *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.1
-         */
         label: TlvField(0, TlvString.bound({ maxLength: 64 })),
-
-        /**
-         * This field is used to identify the mode option.
-         *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.2
-         */
         mode: TlvField(1, TlvUInt8),
-
-        /**
-         * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
-         * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
-         * using standard definitions and/or manufacturer specific namespace definitions.
-         *
-         * The standard mode tags are defined in this cluster specification. For the derived cluster instances, if the
-         * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
-         * mode tag values from that namespace.
-         *
-         * Mode tags can help clients look for options that meet certain criteria, render the user interface, use
-         *
-         * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
-         * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
-         *
-         * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
-         * manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
-         *
-         * A few examples are provided below.
-         *
-         *   • A mode named "100%" can have both the High (manufacturer specific) and Max (standard) mode tag. Clients
-         *     seeking the mode for either High or Max will find the same mode in this case.
-         *
-         *   • A mode that includes a LowEnergy tag can be displayed by the client using a widget icon that shows a
-         *     green leaf.
-         *
-         *   • A mode that includes a LowNoise tag may be used by the client when the user wishes for a lower level of
-         *     audible sound, less likely to disturb the household’s activities.
-         *
-         *   • A mode that includes a LowEnergy tag (standard, defined in this cluster specification) and also a
-         *     Delicate tag (standard, defined in the namespace of a Laundry Mode derived cluster).
-         *
-         *   • A mode that includes both a generic Quick tag (defined here), and Vacuum and Mop tags, (defined in the
-         *     RVC Clean cluster that is a derivation of this cluster).
-         *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.3
-         */
-        modeTags: TlvField(2, TlvArray(TlvModeTagStruct, { maxLength: 8 }))
+        modeTags: TlvField(2, TlvArray(TlvModeTagStruct, { minLength: 1, maxLength: 8 }))
     });
 
     /**

package/src/clusters/power-source.ts

@@ -962,7 +962,7 @@ export namespace PowerSource {
             wiredAssessedInputFrequency: OptionalAttribute(0x4, TlvNullable(TlvUInt16), { omitChanges: true }),
 
             /**
-             * Indicates the type of current the Node expects to be provided by the hard- wired source as specified in
+             * Indicates the type of current the Node expects to be provided by the hard-wired source as specified in
              * WiredCurrentTypeEnum.
              *
              * @see {@link MatterSpecification.v14.Core} § 11.7.7.6
@@ -970,7 +970,7 @@ export namespace PowerSource {
             wiredCurrentType: FixedAttribute(0x5, TlvEnum<WiredCurrentType>()),
 
             /**
-             * Indicates the assessed instantaneous current draw of the Node on the hard- wired source, in mA
+             * Indicates the assessed instantaneous current draw of the Node on the hard-wired source, in mA
              * (milliamps). A value of NULL shall indicate the Node is currently unable to assess the value. If the
              * wired source is not connected, but the Node is still able to assess a value, then the assessed value may
              * be reported.
@@ -1098,7 +1098,7 @@ export namespace PowerSource {
             batReplacementNeeded: Attribute(0xf, TlvBoolean),
 
             /**
-             * Indicates the replaceability of the battery as specified in BatReplaceabilityEnum.
+             * This attribute shall indicate the replaceability of the battery as specified in BatReplaceabilityEnum.
              *
              * @see {@link MatterSpecification.v14.Core} § 11.7.7.17
              */
@@ -1119,9 +1119,7 @@ export namespace PowerSource {
              * contributing to a fault have been cleared, the corresponding BatFaultEnum value shall be removed from
              * this list. An empty list shall indicate there are currently no active faults. The order of this list
              * SHOULD have no significance. Clients interested in monitoring changes in active faults may subscribe to
-             * this attribute, or they may subscribe to Bat
-             *
-             * FaultChange.
+             * this attribute, or they may subscribe to BatFaultChange.
              *
              * @see {@link MatterSpecification.v14.Core} § 11.7.7.19
              */
@@ -1366,14 +1364,10 @@ export namespace PowerSource {
              * The above rules allow that some endpoints can have an unknown power source, and therefore would not be
              * indicated by any instance of this cluster.
              *
-             * Empty list examples
-             *
              * Typically, there is one power source for the node. Also common is mains power for the node with battery
              * backup power for the node. In both these common cases, for each cluster instance described, the list is
              * empty.
              *
-             * Populated list example
-             *
              * A node has a mains power source with Order as 0 (zero), but some application endpoints (not all) have a
              * battery back up source with Order as 1, which means this list is empty for the Power Source cluster
              * associated with the mains power, because it indicates the entire node, but the Power Source cluster

package/src/clusters/pressure-measurement.ts

@@ -35,9 +35,7 @@ export namespace PressureMeasurement {
     export const ExtendedComponent = MutableCluster.Component({
         attributes: {
             /**
-             * Indicates the pressure in Pascals as follows:
-             *
-             * ScaledValue = 10Scale x Pressure [Pa]
+             * Indicates the pressure in Pascals as follows: ScaledValue = 10Scale x Pressure [Pa]
              *
              * The null value indicates that the value is not available.
              *
@@ -62,9 +60,8 @@ export namespace PressureMeasurement {
             maxScaledValue: Attribute(0x12, TlvNullable(TlvInt16), { default: 0 }),
 
             /**
-             * Indicates the magnitude of the possible error that is associated with Scaled
-             *
-             * Value. The true value is located in the range
+             * Indicates the magnitude of the possible error that is associated with ScaledValue. The true value is
+             * located in the range
              *
              * (ScaledValue – ScaledTolerance) to (ScaledValue + ScaledTolerance).
              *

package/src/clusters/pump-configuration-and-control.ts

@@ -221,10 +221,9 @@ export namespace PumpConfigurationAndControl {
         /**
          * The pump will regulate its speed to maintain a constant differential pressure over its flanges.
          *
-         * The setpoint is interpreted as a percentage of the range derived of the [MinCompPressure – Max
-         *
-         * CompPressure] attributes. The internal setpoint will be lowered (compensated) dependent on the flow in the
-         * pump (lower flow ⇒ lower internal setpoint).
+         * The setpoint is interpreted as a percentage of the range derived of the [MinCompPressure – MaxCompPressure]
+         * attributes. The internal setpoint will be lowered (compensated) dependent on the flow in the pump (lower flow
+         * ⇒ lower internal setpoint).
          *
          * @see {@link MatterSpecification.v14.Cluster} § 4.2.6.3.3
          */
@@ -340,9 +339,8 @@ export namespace PumpConfigurationAndControl {
             maxCompPressure: OptionalFixedAttribute(0x6, TlvNullable(TlvInt16), { default: null }),
 
             /**
-             * This attribute specifies the minimum speed the pump can achieve when it is working with the Con
-             *
-             * trolMode attribute set to ConstantSpeed.
+             * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+             * attribute set to ConstantSpeed.
              *
              * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
              *
@@ -394,9 +392,8 @@ export namespace PumpConfigurationAndControl {
              * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
              * with the ControlMode attribute set to ConstantTemperature.
              *
-             * MaxConstTemp shall be greater than or equal to MinConstTemp
-             *
-             * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+             * MaxConstTemp shall be greater than or equal to MinConstTemp Valid range is –273.15 °C to 327.67 °C (steps
+             * of 0.01 °C). Null if the value is invalid.
              *
              * @see {@link MatterSpecification.v14.Cluster} § 4.2.7.13
              */
@@ -437,9 +434,8 @@ export namespace PumpConfigurationAndControl {
     export const ConstantSpeedComponent = MutableCluster.Component({
         attributes: {
             /**
-             * This attribute specifies the minimum speed the pump can achieve when it is working with the Con
-             *
-             * trolMode attribute set to ConstantSpeed.
+             * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+             * attribute set to ConstantSpeed.
              *
              * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
              *
@@ -505,9 +501,8 @@ export namespace PumpConfigurationAndControl {
              * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
              * with the ControlMode attribute set to ConstantTemperature.
              *
-             * MaxConstTemp shall be greater than or equal to MinConstTemp
-             *
-             * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+             * MaxConstTemp shall be greater than or equal to MinConstTemp Valid range is –273.15 °C to 327.67 °C (steps
+             * of 0.01 °C). Null if the value is invalid.
              *
              * @see {@link MatterSpecification.v14.Cluster} § 4.2.7.13
              */
@@ -607,9 +602,8 @@ export namespace PumpConfigurationAndControl {
 
             /**
              * This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. Where a
-             * pump controller function is active, the corresponding bit shall be set to 1. Where a pump
-             *
-             * controller function is not active, the corresponding bit shall be set to 0.
+             * pump controller function is active, the corresponding bit shall be set to 1. Where a pump controller
+             * function is not active, the corresponding bit shall be set to 0.
              *
              * @see {@link MatterSpecification.v14.Cluster} § 4.2.7.14
              */
@@ -741,7 +735,7 @@ export namespace PumpConfigurationAndControl {
              * ControlMode and the optional connection of a remote sensor. The operation and control is prioritized as
              * shown in the scheme below:
              *
-             * Priority Scheme of Pump Operation and Control
+             * ### Priority Scheme of Pump Operation and Control
              *
              * If this attribute is Maximum, Minimum or Local, the OperationMode attribute decides how the pump is
              * operated.
@@ -923,14 +917,12 @@ export namespace PumpConfigurationAndControl {
      *
      * C Pump configuration and control S C Level control S
      *
-     * C On/Off S
+     * ### C On/Off S
      *
      * C = Client S = Server
      *
      * Note: Device names are examples for illustration purposes only
      *
-     * Figure 14. Typical Usage of Pump Configuration and Control Cluster
-     *
      * Per the Matter specification you cannot use {@link PumpConfigurationAndControlCluster} without enabling certain
      * feature combinations. You must use the {@link with} factory method to obtain a working cluster.
      *

package/src/clusters/refrigerator-and-temperature-controlled-cabinet-mode.ts

@@ -169,9 +169,8 @@ export namespace RefrigeratorAndTemperatureControlledCabinetMode {
          * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
          * mode tag values from that namespace.
          *
-         * Mode tags can help clients look for options that meet certain criteria, render the user interface, use
-         *
-         * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
+         * Mode tags can help clients look for options that meet certain criteria, render the user interface, use the
+         * mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
          * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
          *
          * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and

package/src/clusters/rvc-clean-mode.ts

@@ -174,9 +174,8 @@ export namespace RvcCleanMode {
          * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
          * mode tag values from that namespace.
          *
-         * Mode tags can help clients look for options that meet certain criteria, render the user interface, use
-         *
-         * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
+         * Mode tags can help clients look for options that meet certain criteria, render the user interface, use the
+         * mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
          * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
          *
          * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
@@ -220,9 +219,7 @@ export namespace RvcCleanMode {
     }
 
     /**
-     * This command is sent by the device on receipt of the ChangeToMode command. This command
-     *
-     * shall have the following data fields:
+     * This command is sent by the device on receipt of the ChangeToMode command.
      *
      * @see {@link MatterSpecification.v14.Cluster} § 1.10.7.2
      */
@@ -236,9 +233,7 @@ export namespace RvcCleanMode {
     });
 
     /**
-     * This command is sent by the device on receipt of the ChangeToMode command. This command
-     *
-     * shall have the following data fields:
+     * This command is sent by the device on receipt of the ChangeToMode command.
      *
      * @see {@link MatterSpecification.v14.Cluster} § 1.10.7.2
      */

package/src/clusters/rvc-operational-state.ts

@@ -276,10 +276,9 @@ export namespace RvcOperationalState {
 
             /**
              * This attribute represents the current phase of operation being performed by the server. This shall be the
-             * positional index representing the value from the set provided in the PhaseList Attribute,
-             *
-             * where the first item in that list is an index of 0. Thus, this attribute shall have a maximum value that
-             * is "length(PhaseList) - 1".
+             * positional index representing the value from the set provided in the PhaseList Attribute, where the first
+             * item in that list is an index of 0. Thus, this attribute shall have a maximum value that is
+             * "length(PhaseList) - 1".
              *
              * Null if the PhaseList attribute is null or if the PhaseList attribute is an empty list.
              *

package/src/clusters/rvc-run-mode.ts

@@ -109,11 +109,11 @@ export namespace RvcRunMode {
          * due to an error, due to a pause command, or for recharging etc. If currently paused and the device can
          * resume, it will continue to map.
          *
-         * NOTE
+         * > [!NOTE]
          *
-         * this mode is intended to be used so the current space can be mapped by the device if the robot has not
-         * previously done that, or if the layout has substantially changed, for an optimal subsequent cleaning
-         * experience.
+         * > this mode is intended to be used so the current space can be mapped by the device if the robot has not
+         *   previously done that, or if the layout has substantially changed, for an optimal subsequent cleaning
+         *   experience.
          *
          * @see {@link MatterSpecification.v14.Cluster} § 7.2.7.2.3
          */
@@ -189,9 +189,8 @@ export namespace RvcRunMode {
          * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
          * mode tag values from that namespace.
          *
-         * Mode tags can help clients look for options that meet certain criteria, render the user interface, use
-         *
-         * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
+         * Mode tags can help clients look for options that meet certain criteria, render the user interface, use the
+         * mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
          * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
          *
          * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
@@ -270,9 +269,7 @@ export namespace RvcRunMode {
     }
 
     /**
-     * This command is sent by the device on receipt of the ChangeToMode command. This command
-     *
-     * shall have the following data fields:
+     * This command is sent by the device on receipt of the ChangeToMode command.
      *
      * @see {@link MatterSpecification.v14.Cluster} § 1.10.7.2
      */
@@ -286,9 +283,7 @@ export namespace RvcRunMode {
     });
 
     /**
-     * This command is sent by the device on receipt of the ChangeToMode command. This command
-     *
-     * shall have the following data fields:
+     * This command is sent by the device on receipt of the ChangeToMode command.
      *
      * @see {@link MatterSpecification.v14.Cluster} § 1.10.7.2
      */

package/src/clusters/scenes-management.ts

@@ -146,9 +146,8 @@ export namespace ScenesManagement {
          * ValueUnsigned64, ValueSigned64 Fields
          *
          * These fields shall indicate the attribute value as part of an extension field set, associated with a given
-         * AttributeID under an ExtensionFieldSetStruct’s ClusterID. Which of the fields is used shall
-         *
-         * be determined by the type of the attribute indicated by AttributeID as follows:
+         * AttributeID under an ExtensionFieldSetStruct’s ClusterID. Which of the fields is used shall be determined by
+         * the type of the attribute indicated by AttributeID as follows:
          *
          *   • Data types bool, map8, and uint8 shall map to ValueUnsigned8.
          *
@@ -890,7 +889,7 @@ export namespace ScenesManagement {
 
             /**
              * Indicates the number of entries in the Scene Table on this endpoint. This is the total across all
-             * fabrics; note that a single fabric cannot use all those entries (see Handling of fabric- scoping). The
+             * fabrics; note that a single fabric cannot use all those entries (see Handling of fabric-scoping). The
              * minimum size of this table, (i.e., the minimum number of scenes to support across all fabrics per
              * endpoint) shall be 16, unless a device type in which this cluster is used, defines a larger value in the
              * device type definition.
@@ -1008,8 +1007,6 @@ export namespace ScenesManagement {
      * scene identifier collision, and that commands related to scenes without a group may only be unicast, i.e., they
      * shall NOT be multicast or broadcast.
      *
-     * NOTE Support for Scenes Management cluster is provisional.
-     *
      * ScenesManagementCluster supports optional features that you can enable with the ScenesManagementCluster.with()
      * factory method.
      *

package/src/clusters/service-area.ts

@@ -140,9 +140,8 @@ export namespace ServiceArea {
          * A value of null indicates that the total operational time is unknown.
          *
          * There may be cases where the total operational time exceeds the maximum value that can be conveyed by this
-         * attribute, and in such instances this attribute shall be populated with null.
-         *
-         * Null if the Status field is not set to Completed or Skipped.
+         * attribute, and in such instances this attribute shall be populated with null. Null if the Status field is not
+         * set to Completed or Skipped.
          *
          * @see {@link MatterSpecification.v14.Cluster} § 1.17.5.5.3
          */
@@ -345,10 +344,10 @@ export namespace ServiceArea {
          * This SHOULD be used by clients to determine the name and/or the full, or the partial, semantics of a certain
          * area.
          *
-         * NOTE
+         * > [!NOTE]
          *
-         * If any entries on the SupportedAreas attribute’s list have the AreaInfo field missing the semantic data, the
-         * client may remind the user to assign the respective data.
+         * > If any entries on the SupportedAreas attribute’s list have the AreaInfo field missing the semantic data,
+         *   the client may remind the user to assign the respective data.
          *
          * @see {@link MatterSpecification.v14.Cluster} § 1.17.5.4.3
          */
@@ -423,9 +422,8 @@ export namespace ServiceArea {
     export const TlvSelectAreasResponse = TlvObject({
         /**
          * If the Status field is set to Success or UnsupportedArea, the server may use a non-empty string for the
-         * StatusText field to provide additional information. For example, if Status is set to Unsupport
-         *
-         * edArea, the server may use StatusText to indicate which areas are unsupported.
+         * StatusText field to provide additional information. For example, if Status is set to UnsupportedArea, the
+         * server may use StatusText to indicate which areas are unsupported.
          *
          * If the Status field is not set to Success, or UnsupportedArea, the StatusText field shall include a
          * vendor-defined error description which can be used to explain the error to the user. For example, if the
@@ -558,20 +556,19 @@ export namespace ServiceArea {
              *
              * Each entry in this list shall have a unique value for the Name field.
              *
-             * NOTE
+             * > [!NOTE]
              *
-             * due to the maximum size of this list and to the fact that the entries may include strings (see the Name
-             * field of the MapStruct data type), care must be taken by implementers to avoid creating a data structure
-             * that is overly large, which can result in significant latency in accessing this attribute.
+             * > due to the maximum size of this list and to the fact that the entries may include strings (see the Name
+             *   field of the MapStruct data type), care must be taken by implementers to avoid creating a data
+             *   structure that is overly large, which can result in significant latency in accessing this attribute.
              *
              * The value of this attribute may change at any time via an out-of-band interaction outside of the server,
              * such as interactions with a user interface.
              *
              * When updating the SupportedMaps attribute list by deleting entries, or by setting the attribute to an
              * empty list, the SupportedLocations attribute shall be updated such that all entries in that list meet the
-             * constraints indicated in the description of the SupportedLocations attribute. This may result in
-             *
-             * the server removing entries from the SupportedAreas attribute list. See the SupportedAreas attribute
+             * constraints indicated in the description of the SupportedLocations attribute. This may result in the
+             * server removing entries from the SupportedAreas attribute list. See the SupportedAreas attribute
              * description for the implications of changing that attribute.
              *
              * The SupportedMaps attribute list changes mentioned above SHOULD NOT be allowed while the device is
@@ -619,13 +616,13 @@ export namespace ServiceArea {
              * SupportedMaps or SupportedAreas attributes, so the clients can retrieve the progress information at that
              * time.
              *
-             * NOTE
+             * > [!NOTE]
              *
-             * if the device implements the Operational Status cluster, or a derivation of it, in case the device fails
-             * to service any locations in the SelectedAreas list before ending the operation, it SHOULD use the
-             * Operational Status cluster to indicate that the device was unable to complete the operation (see the
-             * UnableToCompleteOperation error from that cluster specification). The clients SHOULD then read the
-             * Progress attribute, and indicate which areas have been successfully serviced (marked as completed).
+             * > if the device implements the Operational Status cluster, or a derivation of it, in case the device
+             *   fails to service any locations in the SelectedAreas list before ending the operation, it SHOULD use the
+             *   Operational Status cluster to indicate that the device was unable to complete the operation (see the
+             *   UnableToCompleteOperation error from that cluster specification). The clients SHOULD then read the
+             *   Progress attribute, and indicate which areas have been successfully serviced (marked as completed).
              *
              * @see {@link MatterSpecification.v14.Cluster} § 1.17.6.6
              */
@@ -682,11 +679,11 @@ export namespace ServiceArea {
              *
              * An empty value indicates that the device is currently unable to provide the list of supported areas.
              *
-             * NOTE
+             * > [!NOTE]
              *
-             * due to the maximum size of this list and to the fact that the entries may include strings (see
-             * LocationName), care must be taken by implementers to avoid creating a data structure that is overly
-             * large, which can result in significant latency in accessing this attribute.
+             * > due to the maximum size of this list and to the fact that the entries may include strings (see
+             *   LocationName), care must be taken by implementers to avoid creating a data structure that is overly
+             *   large, which can result in significant latency in accessing this attribute.
              *
              * The value of this attribute may change at any time via an out-of-band interaction outside of the server,
              * such as interactions with a user interface, or due to internal device changes.
@@ -745,9 +742,9 @@ export namespace ServiceArea {
              * (serviced area) or which area it currently has in view but not taking video of (e.g. an area which is
              * traversed while panning).
              *
-             * NOTE
+             * > [!NOTE]
              *
-             * A device may traverse an area regardless of the status of the area (pending, skipped, or completed).
+             * > A device may traverse an area regardless of the status of the area (pending, skipped, or completed).
              *
              * If a device can simultaneously operate at multiple areas, such as in the case of a sensor that can
              * monitor multiple areas at the same time, the CurrentArea attribute shall NOT be implemented, since it
@@ -788,10 +785,10 @@ export namespace ServiceArea {
              *
              *   • when it changes to or from null
              *
-             * NOTE
+             *     > [!NOTE]
              *
-             * If the device is capable of pausing its operation, this attribute may be set to null, to indicate that
-             * completion time is unknown, or increment the value while being in the paused state.
+             *     > If the device is capable of pausing its operation, this attribute may be set to null, to indicate
+             *       that completion time is unknown, or increment the value while being in the paused state.
              *
              * @see {@link MatterSpecification.v14.Cluster} § 1.17.6.5
              */