@matter/types 0.13.1-alpha.0-20250508-047aa0277 → 0.13.1-alpha.0-20250511-74ef153aa

package/src/clusters/general-commissioning.ts

@@ -61,9 +61,7 @@ export namespace GeneralCommissioning {
          *
          * This command shall result in success with an ErrorCode value of OK in the SetTCAcknowledgementsResponse if
          * all required terms were accepted by the user. Specifically, all bits have a value of 1 in TCAcknowledgements
-         * whose ordinal is marked as required in the file located at EnhancedSe
-         *
-         * tupFlowTCUrl.
+         * whose ordinal is marked as required in the file located at EnhancedSetupFlowTCUrl.
          *
          * If the TCVersion field is less than the TCMinRequiredVersion, then the ErrorCode of TCMinVersionNotMet shall
          * be returned and TCAcknowledgements shall remain unchanged.
@@ -102,18 +100,18 @@ export namespace GeneralCommissioning {
         ValueOutsideRange = 1,
 
         /**
-         * Executed CommissioningComplete outside CASE session.
+         * Executed CommissioningComplet e outside CASE session.
          */
         InvalidAuthentication = 2,
 
         /**
-         * Executed CommissioningComplete when there was no active Fail-Safe context.
+         * Executed CommissioningComplet e when there was no active Fail-Safe context.
          */
         NoFailSafe = 3,
 
         /**
-         * Attempting to arm fail- safe or execute CommissioningComplete from a fabric different than the one associated
-         * with the current fail- safe context.
+         * Attempting to arm fail-safe or execute CommissioningComplet e from a fabric different than the one associated
+         * with the current fail-safe context.
          */
         BusyWithOtherAdmin = 4,
 
@@ -500,9 +498,8 @@ export namespace GeneralCommissioning {
              * LocationCapability is statically set by the manufacturer and indicates if this Node needs to be told an
              * exact RegulatoryLocation. For example a Node which is "Indoor Only" would not be certified for outdoor
              * use at all, and thus there is no need for a commissioner to set or ask the user about whether the device
-             * will be used inside or outside. However a device which states its capability is
-             *
-             * "Indoor/Outdoor" means it would like clarification if possible.
+             * will be used inside or outside. However a device which states its capability is "Indoor/Outdoor" means it
+             * would like clarification if possible.
              *
              * For Nodes without radio network interfaces (e.g. Ethernet-only devices), the value IndoorOutdoor shall
              * always be used.
@@ -520,8 +517,9 @@ export namespace GeneralCommissioning {
             ),
 
             /**
-             * Indicates whether this device supports "concurrent connection flow" commissioning mode (see Section 5.5,
-             * “Commissioning Flows”). If false, the device only supports "non-concurrent connection flow" mode.
+             * This attribute shall indicate whether this device supports "concurrent connection flow" commissioning
+             * mode (see Section 5.5, “Commissioning Flows”). If false, the device only supports "non-concurrent
+             * connection flow" mode.
              *
              * @see {@link MatterSpecification.v14.Core} § 11.10.6.5
              */
@@ -553,7 +551,7 @@ export namespace GeneralCommissioning {
              *     fail-safe timer shall be armed for that duration.
              *
              *   • If ExpiryLengthSeconds is non-zero and the fail-safe timer was currently armed, and the accessing
-             *     Fabric matches the fail-safe context’s associated Fabric, then the fail-safe timer shall be re- armed
+             *     Fabric matches the fail-safe context’s associated Fabric, then the fail-safe timer shall be re-armed
              *     to expire in ExpiryLengthSeconds.
              *
              *   • Otherwise, the command shall leave the current fail-safe state unchanged and immediately respond with
@@ -616,36 +614,36 @@ export namespace GeneralCommissioning {
              * following sequence of clean-up steps shall be executed, in order, by the receiver:
              *
              *   1. Terminate any open PASE secure session by clearing any associated Secure Session Context at the
-             *       Server.
+             *      Server.
              *
              *   2. Revoke the temporary administrative privileges granted to any open PASE session (see Section
-             *       6.6.2.9, “Bootstrapping of the Access Control Cluster”) at the Server.
+             *      6.6.2.9, “Bootstrapping of the Access Control Cluster”) at the Server.
              *
              *   3. If an AddNOC or UpdateNOC command has been successfully invoked, terminate all CASE sessions
-             *       associated with the Fabric whose Fabric Index is recorded in the Fail-Safe context (see
-             *       ArmFailSafe) by clearing any associated Secure Session Context at the Server.
+             *      associated with the Fabric whose Fabric Index is recorded in the Fail-Safe context (see ArmFailSafe)
+             *      by clearing any associated Secure Session Context at the Server.
              *
              *   4. Reset the configuration of all Network Commissioning Networks attribute to their state prior to the
-             *       Fail-Safe being armed.
+             *      Fail-Safe being armed.
              *
              *   5. If an UpdateNOC command had been successfully invoked, revert the state of operational key pair, NOC
-             *       and ICAC for that Fabric to the state prior to the Fail-Safe timer being armed, for the Fabric
-             *       Index that was the subject of the UpdateNOC command.
+             *      and ICAC for that Fabric to the state prior to the Fail-Safe timer being armed, for the Fabric Index
+             *      that was the subject of the UpdateNOC command.
              *
              *   6. If an AddNOC command had been successfully invoked, achieve the equivalent effect of invoking the
-             *       RemoveFabric command against the Fabric Index stored in the Fail-Safe Context for the Fabric Index
-             *       that was the subject of the AddNOC command. This shall remove all associations to that Fabric
-             *       including all fabric-scoped data, and may possibly factory-reset the device depending on current
-             *       device state. This shall only apply to Fabrics added during the fail-safe period as the result of
-             *       the AddNOC command.
+             *      RemoveFabric command against the Fabric Index stored in the Fail-Safe Context for the Fabric Index
+             *      that was the subject of the AddNOC command. This shall remove all associations to that Fabric
+             *      including all fabric-scoped data, and may possibly factory-reset the device depending on current
+             *      device state. This shall only apply to Fabrics added during the fail-safe period as the result of
+             *      the AddNOC command.
              *
              *   7. If the CSRRequest command had been successfully invoked, but no AddNOC or UpdateNOC command had been
-             *       successfully invoked, then the new operational key pair temporarily generated for the purposes of
-             *       NOC addition or update (see Node Operational CSR Procedure) shall be removed as it is no longer
-             *       needed.
+             *      successfully invoked, then the new operational key pair temporarily generated for the purposes of
+             *      NOC addition or update (see Node Operational CSR Procedure) shall be removed as it is no longer
+             *      needed.
              *
              *   8. Remove any RCACs added by the AddTrustedRootCertificate command that are not currently referenced by
-             *       any entry in the Fabrics attribute.
+             *      any entry in the Fabrics attribute.
              *
              *   9. Reset the Breadcrumb attribute to zero.
              *
@@ -678,9 +676,8 @@ export namespace GeneralCommissioning {
              * Location attribute reflected by the Basic Information Cluster configuration, but the
              * SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error.
              *
-             * If the LocationCapability attribute is not Indoor/Outdoor and the NewRegulatoryConfig value
-             *
-             * received does not match either the Indoor or Outdoor fixed value in LocationCapability, then the
+             * If the LocationCapability attribute is not Indoor/Outdoor and the NewRegulatoryConfig value received does
+             * not match either the Indoor or Outdoor fixed value in LocationCapability, then the
              * SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error and the
              * RegulatoryConfig attribute and associated internal radio configuration shall remain unchanged.
              *
@@ -716,9 +713,8 @@ export namespace GeneralCommissioning {
              * or other Administrator operations requiring usage of the Fail Safe timer. It ensures that the Server is
              * configured in a state such that it still has all necessary elements to be fully operable within a Fabric,
              * such as ACL entries (see Section 9.10, “Access Control Cluster”) and operational credentials (see Section
-             * 6.4, “Node Operational Credentials Specification”), and that the Node is reachable using CASE
-             *
-             * (CASE)”) over an operational network.
+             * 6.4, “Node Operational Credentials Specification”), and that the Node is reachable using CASE (see
+             * Section 4.14.2, “Certificate Authenticated Session Establishment (CASE)”) over an operational network.
              *
              * An ErrorCode of NoFailSafe shall be responded to the invoker if the CommissioningComplete command was
              * received when no Fail-Safe context exists.

package/src/clusters/general-diagnostics.ts

@@ -73,7 +73,7 @@ export namespace GeneralDiagnostics {
         /**
          * This field shall indicate the number of times to repeat the Value in the PayloadTestResponse’s Payload field.
          *
-         * Effect upon receipt
+         * ### Effect upon receipt
          *
          * This command shall respond with a response status of CONSTRAINT_ERROR if either:
          *
@@ -90,10 +90,9 @@ export namespace GeneralDiagnostics {
          *   • If Value is 0x55 and the Count is zero, then the PayloadTestResponse would have the Payload field set to
          *     an empty octet string.
          *
-         *   • If Value is 0xA5 and the Count is 10, the PayloadTestResponse would have the Payload field set
-         *
-         * to a content whose hexadecimal representation would be A5A5A5A5A5A5A5A5A5A5, and base64 representation would
-         * be paWlpaWlpaWlpQ==.
+         *   • If Value is 0xA5 and the Count is 10, the PayloadTestResponse would have the Payload field set to a
+         *     content whose hexadecimal representation would be A5A5A5A5A5A5A5A5A5A5, and base64 representation would
+         *     be paWlpaWlpaWlpQ==.
          *
          * @see {@link MatterSpecification.v14.Core} § 11.12.7.4.3
          */
@@ -200,10 +199,9 @@ export namespace GeneralDiagnostics {
         offPremiseServicesReachableIPv6: TlvField(3, TlvNullable(TlvBoolean)),
 
         /**
-         * This field shall contain the current link-layer address for a 802.3 or IEEE 802.11-2020 network
-         *
-         * interface and contain the current extended MAC address for a 802.15.4 interface. The byte order of the octstr
-         * shall be in wire byte order. For addresses values less than 64 bits, the first two bytes shall be zero.
+         * This field shall contain the current link-layer address for a 802.3 or IEEE 802.11-2020 network interface and
+         * contain the current extended MAC address for a 802.15.4 interface. The byte order of the octstr shall be in
+         * wire byte order. For addresses values less than 64 bits, the first two bytes shall be zero.
          *
          * @see {@link MatterSpecification.v14.Core} § 11.12.5.6.5
          */
@@ -361,7 +359,7 @@ export namespace GeneralDiagnostics {
         CellularFault = 2,
 
         /**
-         * The Node has encountered a fault with its802.15.4 radio.
+         * The Node has encountered a fault with its 802.15.4 radio.
          */
         ThreadFault = 3,
 
@@ -440,9 +438,8 @@ export namespace GeneralDiagnostics {
          * Values of EventTrigger in the range 0xFFFF_FFFF_0000_0000 through 0xFFFF_FFFF_FFFF_FFFF are reserved for
          * testing use by manufacturers and will not appear in CSA certification test literature.
          *
-         * If the value of EventTrigger received is not supported by the receiving Node, this command shall
-         *
-         * fail with a status code of INVALID_COMMAND.
+         * If the value of EventTrigger received is not supported by the receiving Node, this command shall fail with a
+         * status code of INVALID_COMMAND.
          *
          * Otherwise, if the EnableKey value matches the configured internal value for a particular Node, and the
          * EventTrigger value matches a supported test event trigger value, the command shall succeed and execute the
@@ -721,12 +718,10 @@ export namespace GeneralDiagnostics {
              * The ActiveHardwareFaults attribute shall indicate the set of faults currently detected by the Node. When
              * the Node detects a fault has been raised, the appropriate HardwareFaultEnum value shall be added to this
              * list. This list shall NOT contain more than one instance of a specific HardwareFaultEnum value. When the
-             * Node detects that all conditions contributing to a fault has been
-             *
-             * cleared, the corresponding HardwareFaultEnum value shall be removed from this list. An empty list shall
-             * indicate there are currently no active faults. The order of this list SHOULD have no significance.
-             * Clients interested in monitoring changes in active faults may subscribe to this attribute, or they may
-             * subscribe to HardwareFaultChange.
+             * Node detects that all conditions contributing to a fault has been cleared, the corresponding
+             * HardwareFaultEnum value shall be removed from this list. An empty list shall indicate there are currently
+             * no active faults. The order of this list SHOULD have no significance. Clients interested in monitoring
+             * changes in active faults may subscribe to this attribute, or they may subscribe to HardwareFaultChange.
              *
              * @see {@link MatterSpecification.v14.Core} § 11.12.6.6
              */
@@ -785,10 +780,10 @@ export namespace GeneralDiagnostics {
 
         commands: {
             /**
-             * This command shall be supported to provide a means for certification tests to trigger some test-
-             * plan-specific events, necessary to assist in automation of device interactions for some certification
-             * test cases. This command shall NOT cause any changes to the state of the device that persist after the
-             * last fabric is removed.
+             * This command shall be supported to provide a means for certification tests to trigger some
+             * test-plan-specific events, necessary to assist in automation of device interactions for some
+             * certification test cases. This command shall NOT cause any changes to the state of the device that
+             * persist after the last fabric is removed.
              *
              * The fields for the TestEventTrigger command are as follows:
              *

package/src/clusters/group-key-management.ts

@@ -224,10 +224,10 @@ export namespace GroupKeyManagement {
          *
          * The AllNodes method minimizes the number of multicast addresses to which a receiver node needs to subscribe.
          *
-         * NOTE
+         * > [!NOTE]
          *
-         * Support for GroupKeyMulticastPolicy is provisional. Correct default behavior is that implied by value
-         * PerGroupID.
+         * > Support for GroupKeyMulticastPolicy is provisional. Correct default behavior is that implied by value
+         *   PerGroupID.
          *
          * @see {@link MatterSpecification.v14.Core} § 11.2.5.4.9
          */
@@ -357,10 +357,9 @@ export namespace GroupKeyManagement {
 
             /**
              * This attribute is a list of GroupInfoMapStruct entries. Each entry provides read-only information about
-             * how a given logical Group ID maps to a particular set of endpoints, and a name for the group.
-             *
-             * The content of this attribute reflects data managed via the Groups cluster (see AppClusters), and is in
-             * general terms referred to as the 'node-wide Group Table'.
+             * how a given logical Group ID maps to a particular set of endpoints, and a name for the group. The content
+             * of this attribute reflects data managed via the Groups cluster (see AppClusters), and is in general terms
+             * referred to as the 'node-wide Group Table'.
              *
              * The GroupTable shall NOT contain any entry whose GroupInfoMapStruct has an empty Endpoints list. If a
              * RemoveGroup or RemoveAllGroups command causes the removal of a group mapping from its last mapped
@@ -394,7 +393,7 @@ export namespace GroupKeyManagement {
              * This command is used by Administrators to set the state of a given Group Key Set, including atomically
              * updating the state of all epoch keys.
              *
-             * Effect on Receipt
+             * ### Effect on Receipt
              *
              * The following validations shall be done against the content of the GroupKeySet field:
              *
@@ -436,13 +435,12 @@ export namespace GroupKeyManagement {
              *     being null, then this command shall fail with an INVALID_COMMAND status code responded to the client.
              *
              * If there exists a Group Key Set associated with the accessing fabric which has the same GroupKeySetID as
-             * that provided in the GroupKeySet field, then the contents of that group key set shall be
-             *
-             * replaced. A replacement shall be done by executing the equivalent of entirely removing the previous Group
-             * Key Set with the given GroupKeySetID, followed by an addition of a Group Key Set with the provided
-             * configuration. Otherwise, if the GroupKeySetID did not match an existing entry, a new Group Key Set
-             * associated with the accessing fabric shall be created with the provided data. The Group Key Set shall be
-             * written to non-volatile storage.
+             * that provided in the GroupKeySet field, then the contents of that group key set shall be replaced. A
+             * replacement shall be done by executing the equivalent of entirely removing the previous Group Key Set
+             * with the given GroupKeySetID, followed by an addition of a Group Key Set with the provided configuration.
+             * Otherwise, if the GroupKeySetID did not match an existing entry, a new Group Key Set associated with the
+             * accessing fabric shall be created with the provided data. The Group Key Set shall be written to
+             * non-volatile storage.
              *
              * Upon completion, this command shall send a status code back to the initiator:
              *
@@ -461,7 +459,7 @@ export namespace GroupKeyManagement {
             /**
              * This command is used by Administrators to read the state of a given Group Key Set.
              *
-             * Effect on Receipt
+             * ### Effect on Receipt
              *
              * If there exists a Group Key Set associated with the accessing fabric which has the same GroupKeySetID as
              * that provided in the GroupKeySetID field, then the contents of that Group Key Set shall be sent in a
@@ -483,7 +481,7 @@ export namespace GroupKeyManagement {
             /**
              * This command is used by Administrators to remove all state of a given Group Key Set.
              *
-             * Effect on Receipt
+             * ### Effect on Receipt
              *
              * If there exists a Group Key Set associated with the accessing fabric which has the same GroupKeySetID as
              * that provided in the GroupKeySetID field, then the contents of that Group Key Set shall be removed,
@@ -514,7 +512,7 @@ export namespace GroupKeyManagement {
              * This command is used by Administrators to query a list of all Group Key Sets associated with the
              * accessing fabric.
              *
-             * Effect on Receipt
+             * ### Effect on Receipt
              *
              * Upon receipt, this command shall iterate all stored GroupKeySetStruct associated with the accessing
              * fabric and generate a KeySetReadAllIndicesResponse command containing the list of GroupKeySetID values
@@ -551,9 +549,8 @@ export namespace GroupKeyManagement {
      * require Administer privilege.
      *
      * Each group entry includes a membership list of zero of more endpoints that are members of the group on the node.
-     * Modification of this membership list is done via the Groups cluster, which is
-     *
-     * scoped to an endpoint. Please see the System Model specification for more information on groups.
+     * Modification of this membership list is done via the Groups cluster, which is scoped to an endpoint. Please see
+     * the System Model specification for more information on groups.
      *
      * GroupKeyManagementCluster supports optional features that you can enable with the
      * GroupKeyManagementCluster.with() factory method.

package/src/clusters/groups.ts

@@ -280,9 +280,8 @@ export namespace Groups {
         groupId: TlvField(0, TlvGroupId),
 
         /**
-         * This field may be set to a human-readable name for the group. If the client has no name for the
-         *
-         * group, the GroupName field shall be set to the empty string.
+         * This field may be set to a human-readable name for the group. If the client has no name for the group, the
+         * GroupName field shall be set to the empty string.
          *
          * Support of group names is optional and is indicated by the FeatureMap and NameSupport attribute.
          *

package/src/clusters/icd-management.ts

@@ -118,10 +118,9 @@ export namespace IcdManagement {
          * For example, if the MonitoredSubject is Node ID 0x1111_2222_3333_AAAA, and one of the subscribers to the
          * server on the entry’s associated fabric bears that Node ID, then the entry matches.
          *
-         * Another example is if the MonitoredSubject has the value 0xFFFF_FFFD_AA12_0002, and one of the
-         *
-         * subscribers to the server on the entry’s associated fabric bears the CASE Authenticated TAG value 0xAA12 and
-         * the version 0x0002 or higher within its NOC, then the entry matches.
+         * Another example is if the MonitoredSubject has the value 0xFFFF_FFFD_AA12_0002, and one of the subscribers to
+         * the server on the entry’s associated fabric bears the CASE Authenticated TAG value 0xAA12 and the version
+         * 0x0002 or higher within its NOC, then the entry matches.
          *
          * @see {@link MatterSpecification.v14.Core} § 9.17.5.3.2
          */
@@ -380,8 +379,6 @@ export namespace IcdManagement {
          * This field shall provide the actual duration that the ICD server can stay active from the time it receives
          * the StayActiveRequest command.
          *
-         * ### Minimum Value for PromisedActiveDuration
-         *
          * The minimum value of the PromisedActiveDuration field shall be equal to either 30000 milliseconds or
          * StayActiveDuration (from the received StayActiveRequest command), whichever is smaller.
          *
@@ -447,7 +444,7 @@ export namespace IcdManagement {
              * Indicates the maximum time in seconds between two Check-In messages when back-off is active. The
              * MaximumCheckInBackoff shall NOT be smaller than the IdleModeDuration.
              *
-             * If the MaximumCheckInBackoff is equal to the IdleModeDuration, it means the ICD does notback- off.
+             * If the MaximumCheckInBackoff is equal to the IdleModeDuration, it means the ICD does not back-off.
              *
              * @see {@link MatterSpecification.v14.Core} § 9.17.6.10
              */
@@ -518,7 +515,7 @@ export namespace IcdManagement {
     export const LongIdleTimeSupportComponent = MutableCluster.Component({
         attributes: {
             /**
-             * Indicates the operating mode of the ICD as specified in the OperatingModeEnum.
+             * This attribute shall indicate the operating mode of the ICD as specified in the OperatingModeEnum.
              *
              *   • If the ICD is operating as a LIT ICD, OperatingMode shall be LIT.
              *

package/src/clusters/identify.ts

@@ -43,7 +43,7 @@ export namespace Identify {
         Display = 4,
 
         /**
-         * Presentation will be conveyed by actuator functionality such as through a window blind operation or in- wall
+         * Presentation will be conveyed by actuator functionality such as through a window blind operation or in-wall
          * relay.
          */
         Actuator = 5

package/src/clusters/index.ts

@@ -72,7 +72,7 @@ export { HepaFilterMonitoringCluster, HepaFilterMonitoring } from "./hepa-filter
 export { IcdManagementCluster, IcdManagement } from "./icd-management.js";
 export { IdentifyCluster, Identify } from "./identify.js";
 export { IlluminanceMeasurementCluster, IlluminanceMeasurement } from "./illuminance-measurement.js";
-export { JointFabricDatastoreClusterCluster, JointFabricDatastoreCluster } from "./joint-fabric-datastore-cluster.js";
+export { JointFabricDatastoreCluster, JointFabricDatastore } from "./joint-fabric-datastore.js";
 export { JointFabricPkiCluster, JointFabricPki } from "./joint-fabric-pki.js";
 export { KeypadInputCluster, KeypadInput } from "./keypad-input.js";
 export { Label } from "./label.js";

package/src/clusters/{joint-fabric-datastore-cluster.ts → joint-fabric-datastore.ts}

@@ -26,7 +26,7 @@ import { TlvNoArguments } from "../tlv/TlvNoArguments.js";
 import { Identity } from "#general";
 import { ClusterRegistry } from "../cluster/ClusterRegistry.js";
 
-export namespace JointFabricDatastoreCluster {
+export namespace JointFabricDatastore {
     /**
      * @see {@link MatterSpecification.v14.Core} § 11.24.5.4
      */
@@ -406,7 +406,7 @@ export namespace JointFabricDatastoreCluster {
      */
     export const ClusterInstance = MutableCluster({
         id: 0x752,
-        name: "JointFabricDatastoreCluster",
+        name: "JointFabricDatastore",
         revision: 1,
 
         attributes: {
@@ -642,8 +642,6 @@ export namespace JointFabricDatastoreCluster {
      * The Admin level of access to the Joint Fabric Datastore cluster server shall be limited to JF Administrator Nodes
      * identified using the Administrator CAT.
      *
-     * NOTE Support for Joint Fabric Datastore cluster is provisional.
-     *
      * @see {@link MatterSpecification.v14.Core} § 11.24
      */
     export interface Cluster extends Identity<typeof ClusterInstance> {}
@@ -652,6 +650,6 @@ export namespace JointFabricDatastoreCluster {
     export const Complete = Cluster;
 }
 
-export type JointFabricDatastoreClusterCluster = JointFabricDatastoreCluster.Cluster;
-export const JointFabricDatastoreClusterCluster = JointFabricDatastoreCluster.Cluster;
-ClusterRegistry.register(JointFabricDatastoreCluster.Complete);
+export type JointFabricDatastoreCluster = JointFabricDatastore.Cluster;
+export const JointFabricDatastoreCluster = JointFabricDatastore.Cluster;
+ClusterRegistry.register(JointFabricDatastore.Complete);

package/src/clusters/joint-fabric-pki.ts

@@ -124,7 +124,7 @@ export namespace JointFabricPki {
         Ok = 0,
 
         /**
-         * Anchor Transfer was not started due to on- going Datastore operations
+         * Anchor Transfer was not started due to on-going Datastore operations
          */
         TransferAnchorStatusDatastoreBusy = 1,
 
@@ -187,8 +187,6 @@ export namespace JointFabricPki {
      * An instance of the Joint Fabric PKI Cluster only applies to Joint Fabric Administrator nodes fulfilling the role
      * of Anchor CA.
      *
-     * NOTE Support for Joint Fabric PKI Cluster is provisional.
-     *
      * @see {@link MatterSpecification.v14.Core} § 11.25
      */
     export interface Cluster extends Identity<typeof ClusterInstance> {}

package/src/clusters/keypad-input.ts

@@ -177,7 +177,7 @@ export namespace KeypadInput {
     }
 
     /**
-     * This command shall be generated in response to a SendKey command. The data for this command shall be as follows:
+     * This command shall be generated in response to a SendKey command.
      *
      * @see {@link MatterSpecification.v14.Cluster} § 6.8.6.2
      */
@@ -191,7 +191,7 @@ export namespace KeypadInput {
     });
 
     /**
-     * This command shall be generated in response to a SendKey command. The data for this command shall be as follows:
+     * This command shall be generated in response to a SendKey command.
      *
      * @see {@link MatterSpecification.v14.Cluster} § 6.8.6.2
      */

package/src/clusters/laundry-washer-controls.ts

@@ -94,8 +94,9 @@ export namespace LaundryWasherControls {
              * 1. If a value is received that is outside of the defined constraints, a CONSTRAINT_ERROR shall be sent as
              * the response. If a value is attempted to be written that doesn’t match a valid index (e.g. an index of 5
              * when the list has 4 values), a CONSTRAINT_ERROR shall be sent as the response. If null is written to this
-             * attribute, there will be no spin speed for the selected cycle. If the value is null, there will be no
-             * spin speed on the current mode.
+             * attribute, there will be no spin speed for the
+             *
+             * selected cycle. If the value is null, there will be no spin speed on the current mode.
              *
              * @see {@link MatterSpecification.v14.Cluster} § 8.6.6.2
              */
@@ -111,10 +112,9 @@ export namespace LaundryWasherControls {
             /**
              * Indicates how many times a rinse cycle shall be performed on a device for the current mode of operation.
              * A value of None shall indicate that no rinse cycle will be performed. This value may be set by the client
-             * to adjust the number of rinses that are performed for
-             *
-             * the current mode of operation. If the device is not in a compatible state to accept the provided value,
-             * an INVALID_IN_STATE error shall be sent as the response.
+             * to adjust the number of rinses that are performed for the current mode of operation. If the device is not
+             * in a compatible state to accept the provided value, an INVALID_IN_STATE error shall be sent as the
+             * response.
              *
              * @see {@link MatterSpecification.v14.Cluster} § 8.6.6.3
              */

package/src/clusters/laundry-washer-mode.ts

@@ -158,59 +158,9 @@ export namespace LaundryWasherMode {
      * @see {@link MatterSpecification.v14.Cluster} § 8.5.5.1
      */
     export const TlvModeOption = TlvObject({
-        /**
-         * This field shall indicate readable text that describes the mode option, so that a client can provide it to
-         * the user to indicate what this option means. This field is meant to be readable and understandable by the
-         * user.
-         *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.1
-         */
         label: TlvField(0, TlvString.bound({ maxLength: 64 })),
-
-        /**
-         * This field is used to identify the mode option.
-         *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.2
-         */
         mode: TlvField(1, TlvUInt8),
-
-        /**
-         * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
-         * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
-         * using standard definitions and/or manufacturer specific namespace definitions.
-         *
-         * The standard mode tags are defined in this cluster specification. For the derived cluster instances, if the
-         * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
-         * mode tag values from that namespace.
-         *
-         * Mode tags can help clients look for options that meet certain criteria, render the user interface, use
-         *
-         * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
-         * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
-         *
-         * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
-         * manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
-         *
-         * A few examples are provided below.
-         *
-         *   • A mode named "100%" can have both the High (manufacturer specific) and Max (standard) mode tag. Clients
-         *     seeking the mode for either High or Max will find the same mode in this case.
-         *
-         *   • A mode that includes a LowEnergy tag can be displayed by the client using a widget icon that shows a
-         *     green leaf.
-         *
-         *   • A mode that includes a LowNoise tag may be used by the client when the user wishes for a lower level of
-         *     audible sound, less likely to disturb the household’s activities.
-         *
-         *   • A mode that includes a LowEnergy tag (standard, defined in this cluster specification) and also a
-         *     Delicate tag (standard, defined in the namespace of a Laundry Mode derived cluster).
-         *
-         *   • A mode that includes both a generic Quick tag (defined here), and Vacuum and Mop tags, (defined in the
-         *     RVC Clean cluster that is a derivation of this cluster).
-         *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.3
-         */
-        modeTags: TlvField(2, TlvArray(TlvModeTagStruct, { maxLength: 8 }))
+        modeTags: TlvField(2, TlvArray(TlvModeTagStruct, { minLength: 1, maxLength: 8 }))
     });
 
     /**

package/src/clusters/level-control.ts

@@ -60,7 +60,7 @@ export namespace LevelControl {
         /**
          * Frequency (FQ)
          *
-         * NOTE The Frequency feature is provisional.
+         * Supports frequency attributes and behavior.
          *
          * @see {@link MatterSpecification.v14.Cluster} § 1.6.4.3
          */
@@ -156,9 +156,7 @@ export namespace LevelControl {
          * close to this rate as the device is able. If the Rate field is null, then the value of the DefaultMoveRate
          * attribute shall be used if that attribute is supported and its value is not null. If the Rate field is null
          * and the DefaultMoveRate attribute is either not supported or set to null, then the device SHOULD move as fast
-         * as it is able. If the device is not able to move at a variable rate, this
-         *
-         * field may be disregarded.
+         * as it is able. If the device is not able to move at a variable rate, this field may be disregarded.
          *
          * @see {@link MatterSpecification.v14.Cluster} § 1.6.7.2.2
          */
@@ -212,10 +210,8 @@ export namespace LevelControl {
 
         /**
          * This field shall indicate the time that shall be taken to perform the step, in tenths of a second. A step is
-         * a change in the CurrentLevel of StepSize units. The actual time taken SHOULD be as close to
-         *
-         * this as the device is able. If the TransitionTime field is equal to null, the device SHOULD move as fast as
-         * it is able.
+         * a change in the CurrentLevel of StepSize units. The actual time taken SHOULD be as close to this as the
+         * device is able. If the TransitionTime field is equal to null, the device SHOULD move as fast as it is able.
          *
          * If the device is not able to move at a variable rate, the TransitionTime field may be disregarded.
          *
@@ -323,7 +319,8 @@ export namespace LevelControl {
     export const FrequencyComponent = MutableCluster.Component({
         attributes: {
             /**
-             * Indicates the frequency at which the device is at CurrentLevel. A CurrentFrequency of 0 is unknown.
+             * This attribute shall indicate the frequency at which the device is at CurrentLevel. A CurrentFrequency of
+             * 0 is unknown.
              *
              * Changes to this attribute shall only be marked as reportable in the following cases:
              *
@@ -399,7 +396,7 @@ export namespace LevelControl {
             /**
              * Frequency
              *
-             * NOTE The Frequency feature is provisional.
+             * Supports frequency attributes and behavior.
              *
              * @see {@link MatterSpecification.v14.Cluster} § 1.6.4.3
              */

package/src/clusters/low-power.ts

@@ -42,10 +42,10 @@ export namespace LowPower {
      * The cluster server for Low Power is implemented by a device that supports a low power mode, such as a TV, Set-top
      * box, or Smart Speaker.
      *
-     * NOTE
+     * > [!NOTE]
      *
-     * We have considered a “DisableLowPowerMode” command but have not added it due to suspected issues with energy
-     * consumption regulations. This can be added in the future.
+     * > We have considered a “DisableLowPowerMode” command but have not added it due to suspected issues with energy
+     *   consumption regulations. This can be added in the future.
      *
      * @see {@link MatterSpecification.v14.Cluster} § 1.11
      */