@matter/types 0.13.0-alpha.0-20250311-3eb0af5f2 → 0.13.0-alpha.0-20250322-f085fa576

package/dist/cjs/clusters/water-heater-management.d.ts

@@ -309,8 +309,8 @@ export declare namespace WaterHeaterManagement {
              * can be computed by taking the specific heat capacity of water (4182 J/kg °C) and by knowing the current
              * temperature of the water, the tank volume and target temperature.
              *
-             * For example, if the target temperature was 60°C, the current temperature was 20°C and the tank volume
-             * was 100L:
+             * For example, if the target temperature was 60°C, the current temperature was 20°C and the tank volume was
+             * 100L:
              *
              * Mass of water = 1kg per Litre
              *
@@ -335,9 +335,9 @@ export declare namespace WaterHeaterManagement {
              * For example, a direct electric immersion heating element can be close to 100% efficient, so the
              * electrical energy needed to heat the hot water is nearly the same as the EstimatedHeatEnergyRequired.
              * However some forms of heating, such as an air-source heat pump which extracts heat from ambient air,
-             * requires much less electrical energy to heat hot water. Heat pumps can be produce 3kWh of heat output
-             * for 1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside
-             * the scope of this cluster.
+             * requires much less electrical energy to heat hot water. Heat pumps can be produce 3kWh of heat output for
+             * 1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside the
+             * scope of this cluster.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 9.5.7.4
              */
@@ -350,27 +350,27 @@ export declare namespace WaterHeaterManagement {
     const TankPercentComponent: {
         readonly attributes: {
             /**
-             * Indicates an approximate level of hot water stored in the tank, which might help consumers understand
-             * the amount of hot water remaining in the tank. The accuracy of this attribute is manufacturer specific.
+             * Indicates an approximate level of hot water stored in the tank, which might help consumers understand the
+             * amount of hot water remaining in the tank. The accuracy of this attribute is manufacturer specific.
              *
              * In most hot water tanks, there is a stratification effect where the hot water layer rests above a cooler
-             * layer of water below. For this reason cold water is fed in at the bottom of the tank and the hot water
-             * is drawn from the top.
+             * layer of water below. For this reason cold water is fed in at the bottom of the tank and the hot water is
+             * drawn from the top.
              *
              * Some water tanks might use multiple temperature probes to estimate the level of the hot water layer. A
              * water heater with multiple temperature probes is likely to implement an algorithm to estimate the hot
-             * water tank percentage by taking into account the temperature values of each probe to determine the
-             * height of the hot water.
+             * water tank percentage by taking into account the temperature values of each probe to determine the height
+             * of the hot water.
              *
-             * However it might be possible with a single temperature probe to estimate how much hot water is left
-             * using a simpler algorithm:
+             * However it might be possible with a single temperature probe to estimate how much hot water is left using
+             * a simpler algorithm:
              *
              * For example, if the target temperature was 60°C, the CurrentTemperature was 40°C from a single
              * temperature probe measuring the average water temperature and the temperature of incoming cold water
              * (COLD_WATER_TEMP) was assumed to be 20°C:
              *
-             * TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature - COLD_WATER_TEMP))
-             * * 100)
+             * TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature - COLD_WATER_TEMP)) *
+             * 100)
              *
              * TankPercentage = min( max(TankPercentage,0), 100)
              *
@@ -651,8 +651,8 @@ export declare namespace WaterHeaterManagement {
                      * can be computed by taking the specific heat capacity of water (4182 J/kg °C) and by knowing the current
                      * temperature of the water, the tank volume and target temperature.
                      *
-                     * For example, if the target temperature was 60°C, the current temperature was 20°C and the tank volume
-                     * was 100L:
+                     * For example, if the target temperature was 60°C, the current temperature was 20°C and the tank volume was
+                     * 100L:
                      *
                      * Mass of water = 1kg per Litre
                      *
@@ -677,9 +677,9 @@ export declare namespace WaterHeaterManagement {
                      * For example, a direct electric immersion heating element can be close to 100% efficient, so the
                      * electrical energy needed to heat the hot water is nearly the same as the EstimatedHeatEnergyRequired.
                      * However some forms of heating, such as an air-source heat pump which extracts heat from ambient air,
-                     * requires much less electrical energy to heat hot water. Heat pumps can be produce 3kWh of heat output
-                     * for 1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside
-                     * the scope of this cluster.
+                     * requires much less electrical energy to heat hot water. Heat pumps can be produce 3kWh of heat output for
+                     * 1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside the
+                     * scope of this cluster.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 9.5.7.4
                      */
@@ -693,27 +693,27 @@ export declare namespace WaterHeaterManagement {
             readonly component: {
                 readonly attributes: {
                     /**
-                     * Indicates an approximate level of hot water stored in the tank, which might help consumers understand
-                     * the amount of hot water remaining in the tank. The accuracy of this attribute is manufacturer specific.
+                     * Indicates an approximate level of hot water stored in the tank, which might help consumers understand the
+                     * amount of hot water remaining in the tank. The accuracy of this attribute is manufacturer specific.
                      *
                      * In most hot water tanks, there is a stratification effect where the hot water layer rests above a cooler
-                     * layer of water below. For this reason cold water is fed in at the bottom of the tank and the hot water
-                     * is drawn from the top.
+                     * layer of water below. For this reason cold water is fed in at the bottom of the tank and the hot water is
+                     * drawn from the top.
                      *
                      * Some water tanks might use multiple temperature probes to estimate the level of the hot water layer. A
                      * water heater with multiple temperature probes is likely to implement an algorithm to estimate the hot
-                     * water tank percentage by taking into account the temperature values of each probe to determine the
-                     * height of the hot water.
+                     * water tank percentage by taking into account the temperature values of each probe to determine the height
+                     * of the hot water.
                      *
-                     * However it might be possible with a single temperature probe to estimate how much hot water is left
-                     * using a simpler algorithm:
+                     * However it might be possible with a single temperature probe to estimate how much hot water is left using
+                     * a simpler algorithm:
                      *
                      * For example, if the target temperature was 60°C, the CurrentTemperature was 40°C from a single
                      * temperature probe measuring the average water temperature and the temperature of incoming cold water
                      * (COLD_WATER_TEMP) was assumed to be 20°C:
                      *
-                     * TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature - COLD_WATER_TEMP))
-                     * * 100)
+                     * TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature - COLD_WATER_TEMP)) *
+                     * 100)
                      *
                      * TankPercentage = min( max(TankPercentage,0), 100)
                      *
@@ -996,8 +996,8 @@ export declare namespace WaterHeaterManagement {
                      * can be computed by taking the specific heat capacity of water (4182 J/kg °C) and by knowing the current
                      * temperature of the water, the tank volume and target temperature.
                      *
-                     * For example, if the target temperature was 60°C, the current temperature was 20°C and the tank volume
-                     * was 100L:
+                     * For example, if the target temperature was 60°C, the current temperature was 20°C and the tank volume was
+                     * 100L:
                      *
                      * Mass of water = 1kg per Litre
                      *
@@ -1022,9 +1022,9 @@ export declare namespace WaterHeaterManagement {
                      * For example, a direct electric immersion heating element can be close to 100% efficient, so the
                      * electrical energy needed to heat the hot water is nearly the same as the EstimatedHeatEnergyRequired.
                      * However some forms of heating, such as an air-source heat pump which extracts heat from ambient air,
-                     * requires much less electrical energy to heat hot water. Heat pumps can be produce 3kWh of heat output
-                     * for 1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside
-                     * the scope of this cluster.
+                     * requires much less electrical energy to heat hot water. Heat pumps can be produce 3kWh of heat output for
+                     * 1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside the
+                     * scope of this cluster.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 9.5.7.4
                      */
@@ -1038,27 +1038,27 @@ export declare namespace WaterHeaterManagement {
             readonly component: {
                 readonly attributes: {
                     /**
-                     * Indicates an approximate level of hot water stored in the tank, which might help consumers understand
-                     * the amount of hot water remaining in the tank. The accuracy of this attribute is manufacturer specific.
+                     * Indicates an approximate level of hot water stored in the tank, which might help consumers understand the
+                     * amount of hot water remaining in the tank. The accuracy of this attribute is manufacturer specific.
                      *
                      * In most hot water tanks, there is a stratification effect where the hot water layer rests above a cooler
-                     * layer of water below. For this reason cold water is fed in at the bottom of the tank and the hot water
-                     * is drawn from the top.
+                     * layer of water below. For this reason cold water is fed in at the bottom of the tank and the hot water is
+                     * drawn from the top.
                      *
                      * Some water tanks might use multiple temperature probes to estimate the level of the hot water layer. A
                      * water heater with multiple temperature probes is likely to implement an algorithm to estimate the hot
-                     * water tank percentage by taking into account the temperature values of each probe to determine the
-                     * height of the hot water.
+                     * water tank percentage by taking into account the temperature values of each probe to determine the height
+                     * of the hot water.
                      *
-                     * However it might be possible with a single temperature probe to estimate how much hot water is left
-                     * using a simpler algorithm:
+                     * However it might be possible with a single temperature probe to estimate how much hot water is left using
+                     * a simpler algorithm:
                      *
                      * For example, if the target temperature was 60°C, the CurrentTemperature was 40°C from a single
                      * temperature probe measuring the average water temperature and the temperature of incoming cold water
                      * (COLD_WATER_TEMP) was assumed to be 20°C:
                      *
-                     * TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature - COLD_WATER_TEMP))
-                     * * 100)
+                     * TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature - COLD_WATER_TEMP)) *
+                     * 100)
                      *
                      * TankPercentage = min( max(TankPercentage,0), 100)
                      *
@@ -1072,8 +1072,8 @@ export declare namespace WaterHeaterManagement {
         }];
     }, []>;
     /**
-     * This cluster is used to allow clients to control the operation of a hot water heating appliance so that it can
-     * be used with energy management.
+     * This cluster is used to allow clients to control the operation of a hot water heating appliance so that it can be
+     * used with energy management.
      *
      * Heating of hot water is one of the main energy uses in homes, and when coupled with the Energy Management
      * cluster, it can help consumers save cost (e.g. using power at cheaper times or from local solar PV generation).
@@ -1359,8 +1359,8 @@ export declare namespace WaterHeaterManagement {
     /**
      * This cluster supports all WaterHeaterManagement features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     interface Complete extends Identity<typeof CompleteInstance> {
     }

package/dist/cjs/clusters/water-heater-management.js

@@ -149,8 +149,8 @@ var WaterHeaterManagement;
        * can be computed by taking the specific heat capacity of water (4182 J/kg °C) and by knowing the current
        * temperature of the water, the tank volume and target temperature.
        *
-       * For example, if the target temperature was 60°C, the current temperature was 20°C and the tank volume
-       * was 100L:
+       * For example, if the target temperature was 60°C, the current temperature was 20°C and the tank volume was
+       * 100L:
        *
        * Mass of water = 1kg per Litre
        *
@@ -175,9 +175,9 @@ var WaterHeaterManagement;
        * For example, a direct electric immersion heating element can be close to 100% efficient, so the
        * electrical energy needed to heat the hot water is nearly the same as the EstimatedHeatEnergyRequired.
        * However some forms of heating, such as an air-source heat pump which extracts heat from ambient air,
-       * requires much less electrical energy to heat hot water. Heat pumps can be produce 3kWh of heat output
-       * for 1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside
-       * the scope of this cluster.
+       * requires much less electrical energy to heat hot water. Heat pumps can be produce 3kWh of heat output for
+       * 1kWh of electrical energy input. The conversion between heat energy and electrical energy is outside the
+       * scope of this cluster.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 9.5.7.4
        */
@@ -187,27 +187,27 @@ var WaterHeaterManagement;
   WaterHeaterManagement2.TankPercentComponent = import_MutableCluster.MutableCluster.Component({
     attributes: {
       /**
-       * Indicates an approximate level of hot water stored in the tank, which might help consumers understand
-       * the amount of hot water remaining in the tank. The accuracy of this attribute is manufacturer specific.
+       * Indicates an approximate level of hot water stored in the tank, which might help consumers understand the
+       * amount of hot water remaining in the tank. The accuracy of this attribute is manufacturer specific.
        *
        * In most hot water tanks, there is a stratification effect where the hot water layer rests above a cooler
-       * layer of water below. For this reason cold water is fed in at the bottom of the tank and the hot water
-       * is drawn from the top.
+       * layer of water below. For this reason cold water is fed in at the bottom of the tank and the hot water is
+       * drawn from the top.
        *
        * Some water tanks might use multiple temperature probes to estimate the level of the hot water layer. A
        * water heater with multiple temperature probes is likely to implement an algorithm to estimate the hot
-       * water tank percentage by taking into account the temperature values of each probe to determine the
-       * height of the hot water.
+       * water tank percentage by taking into account the temperature values of each probe to determine the height
+       * of the hot water.
        *
-       * However it might be possible with a single temperature probe to estimate how much hot water is left
-       * using a simpler algorithm:
+       * However it might be possible with a single temperature probe to estimate how much hot water is left using
+       * a simpler algorithm:
        *
        * For example, if the target temperature was 60°C, the CurrentTemperature was 40°C from a single
        * temperature probe measuring the average water temperature and the temperature of incoming cold water
        * (COLD_WATER_TEMP) was assumed to be 20°C:
        *
-       * TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature - COLD_WATER_TEMP))
-       * * 100)
+       * TankPercentage = int(((current temperature - COLD_WATER_TEMP) / (target temperature - COLD_WATER_TEMP)) *
+       * 100)
        *
        * TankPercentage = min( max(TankPercentage,0), 100)
        *

package/dist/cjs/clusters/water-heater-mode.d.ts

@@ -79,8 +79,8 @@ export declare namespace WaterHeaterMode {
          */
         Manual = 16385,
         /**
-         * While in modes with this tag, the device will attempt to keep the water warm based on the Schedules
-         * attribute of the associated Thermostat cluster.
+         * While in modes with this tag, the device will attempt to keep the water warm based on the Schedules attribute
+         * of the associated Thermostat cluster.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 9.6.7.1.3
          */
@@ -143,9 +143,9 @@ export declare namespace WaterHeaterMode {
          */
         mode: import("../tlv/TlvObject.js").FieldType<number>;
         /**
-         * This field shall contain a list of tags that are associated with the mode option. This may be used by
-         * clients to determine the full or the partial semantics of a certain mode, depending on which tags they
-         * understand, using standard definitions and/or manufacturer specific namespace definitions.
+         * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
+         * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
+         * using standard definitions and/or manufacturer specific namespace definitions.
          *
          * The standard mode tags are defined in this cluster specification. For the derived cluster instances, if the
          * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
@@ -156,8 +156,8 @@ export declare namespace WaterHeaterMode {
          * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
          * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
          *
-         * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard
-         * and manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
+         * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
+         * manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
          *
          * A few examples are provided below.
          *
@@ -233,8 +233,8 @@ export declare namespace WaterHeaterMode {
              * At least one entry in the SupportedModes attribute shall include the Off mode tag in the ModeTags field
              * list.
              *
-             * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT
-             * also include an additional instance of any one of these tag types.
+             * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT also
+             * include an additional instance of any one of these tag types.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 9.6.6.1
              */
@@ -254,9 +254,9 @@ export declare namespace WaterHeaterMode {
                  */
                 mode: import("../tlv/TlvObject.js").FieldType<number>;
                 /**
-                 * This field shall contain a list of tags that are associated with the mode option. This may be used by
-                 * clients to determine the full or the partial semantics of a certain mode, depending on which tags they
-                 * understand, using standard definitions and/or manufacturer specific namespace definitions.
+                 * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
+                 * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
+                 * using standard definitions and/or manufacturer specific namespace definitions.
                  *
                  * The standard mode tags are defined in this cluster specification. For the derived cluster instances, if the
                  * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
@@ -267,8 +267,8 @@ export declare namespace WaterHeaterMode {
                  * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
                  * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
                  *
-                 * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard
-                 * and manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
+                 * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
+                 * manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
                  *
                  * A few examples are provided below.
                  *
@@ -328,7 +328,10 @@ export declare namespace WaterHeaterMode {
              */
             readonly changeToMode: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                 newMode: import("../tlv/TlvObject.js").FieldType<number>;
-            }>, void, any>;
+            }>, import("../tlv/TlvObject.js").TypeFromFields<{
+                status: import("../tlv/TlvObject.js").FieldType<import("../index.js").Status>;
+                statusText: import("../tlv/TlvObject.js").FieldType<string>;
+            }>, any>;
         };
         /**
          * This metadata controls which WaterHeaterModeCluster elements matter.js activates for specific feature
@@ -364,8 +367,8 @@ export declare namespace WaterHeaterMode {
              * At least one entry in the SupportedModes attribute shall include the Off mode tag in the ModeTags field
              * list.
              *
-             * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT
-             * also include an additional instance of any one of these tag types.
+             * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT also
+             * include an additional instance of any one of these tag types.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 9.6.6.1
              */
@@ -385,9 +388,9 @@ export declare namespace WaterHeaterMode {
                  */
                 mode: import("../tlv/TlvObject.js").FieldType<number>;
                 /**
-                 * This field shall contain a list of tags that are associated with the mode option. This may be used by
-                 * clients to determine the full or the partial semantics of a certain mode, depending on which tags they
-                 * understand, using standard definitions and/or manufacturer specific namespace definitions.
+                 * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
+                 * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
+                 * using standard definitions and/or manufacturer specific namespace definitions.
                  *
                  * The standard mode tags are defined in this cluster specification. For the derived cluster instances, if the
                  * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
@@ -398,8 +401,8 @@ export declare namespace WaterHeaterMode {
                  * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
                  * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
                  *
-                 * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard
-                 * and manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
+                 * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
+                 * manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
                  *
                  * A few examples are provided below.
                  *
@@ -459,7 +462,10 @@ export declare namespace WaterHeaterMode {
              */
             readonly changeToMode: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                 newMode: import("../tlv/TlvObject.js").FieldType<number>;
-            }>, void, any>;
+            }>, import("../tlv/TlvObject.js").TypeFromFields<{
+                status: import("../tlv/TlvObject.js").FieldType<import("../index.js").Status>;
+                statusText: import("../tlv/TlvObject.js").FieldType<string>;
+            }>, any>;
         };
         /**
          * This metadata controls which WaterHeaterModeCluster elements matter.js activates for specific feature

package/dist/cjs/clusters/water-heater-mode.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"water-heater-mode.d.ts","sourceRoot":"","sources":["../../../src/clusters/water-heater-mode.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH,6CAA6C;AAE7C,OAAO,EAAE,cAAc,EAAE,MAAM,uCAAuC,CAAC;AACvE,OAAO,EAAE,OAAO,EAAE,MAAM,2BAA2B,CAAC;AACpD,OAAO,EAAE,cAAc,EAAE,SAAS,EAAE,OAAO,EAAiB,MAAM,uBAAuB,CAAC;AAM1F,OAAO,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAC;AAC1C,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACrD,OAAO,EAAE,QAAQ,EAAE,MAAM,UAAU,CAAC;AAGpC,yBAAiB,eAAe,CAAC;IAC7B;;;;OAIG;IACH,KAAY,OAAO;QACf;;;;WAIG;QACH,KAAK,UAAU;KAClB;IAED,KAAY,OAAO;QACf;;WAEG;QACH,IAAI,IAAI;QAER;;WAEG;QACH,KAAK,IAAI;QAET;;WAEG;QACH,KAAK,IAAI;QAET;;WAEG;QACH,QAAQ,IAAI;QAEZ;;WAEG;QACH,SAAS,IAAI;QAEb;;WAEG;QACH,QAAQ,IAAI;QAEZ;;WAEG;QACH,GAAG,IAAI;QAEP;;WAEG;QACH,GAAG,IAAI;QAEP;;WAEG;QACH,KAAK,IAAI;QAET;;WAEG;QACH,GAAG,IAAI;QAEP;;;;WAIG;QACH,GAAG,QAAQ;QAEX;;;;;WAKG;QACH,MAAM,QAAQ;QAEd;;;;;WAKG;QACH,KAAK,QAAQ;KAChB;IAED;;;;OAIG;IACI,MAAM,gBAAgB;QACzB;;;;;;;;;;;;WAYG;;QAGH;;;;;WAKG;;MAEL,CAAC;IAEH;;;;OAIG;IACH,UAAiB,aAAc,SAAQ,cAAc,CAAC,OAAO,gBAAgB,CAAC;KAAG;IAEjF;;;;;OAKG;IACI,MAAM,aAAa;QACtB;;;;;;WAMG;;QAGH;;;;WAIG;;QAGH;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;WAmCG;;YAzFH;;;;;;;;;;;;eAYG;;YAGH;;;;;eAKG;;;MAuEL,CAAC;IAEH;;;;;OAKG;IACH,UAAiB,UAAW,SAAQ,cAAc,CAAC,OAAO,aAAa,CAAC;KAAG;IAE3E;;OAEG;IACI,MAAM,IAAI;;;;;YAMT;;;;eAIG;;;;YAKH;;;;;;;;;;;eAWG;;gBA5FP;;;;;;mBAMG;;gBAGH;;;;mBAIG;;gBAGH;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;mBAmCG;;oBAzFH;;;;;;;;;;;;uBAYG;;oBAGH;;;;;uBAKG;;;;YAqHC;;eAEG;;;;YAKH;;;;;;eAMG;;;;;QAIP;;;WAGG;;;;;;;KAEL,CAAC;IAEH;;OAEG;IACI,MAAM,eAAe;;;;;YAtDpB;;;;eAIG;;;;YAKH;;;;;;;;;;;eAWG;;gBA5FP;;;;;;mBAMG;;gBAGH;;;;mBAIG;;gBAGH;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;mBAmCG;;oBAzFH;;;;;;;;;;;;uBAYG;;oBAGH;;;;;uBAKG;;;;YAqHC;;eAEG;;;;YAKH;;;;;;eAMG;;;;;QAIP;;;WAGG;;;;;;;UAO4C,CAAC;IAEpD;;;;;;;;OAQG;IACH,UAAiB,OAAQ,SAAQ,QAAQ,CAAC,OAAO,eAAe,CAAC;KAAG;IAE7D,MAAM,OAAO,EAAE,OAAyB,CAAC;IACzC,MAAM,QAAQ,SAAU,CAAC;CACnC;AAED,MAAM,MAAM,sBAAsB,GAAG,eAAe,CAAC,OAAO,CAAC;AAC7D,eAAO,MAAM,sBAAsB,yBAA0B,CAAC"}
+{"version":3,"file":"water-heater-mode.d.ts","sourceRoot":"","sources":["../../../src/clusters/water-heater-mode.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH,6CAA6C;AAE7C,OAAO,EAAE,cAAc,EAAE,MAAM,uCAAuC,CAAC;AACvE,OAAO,EAAE,OAAO,EAAE,MAAM,2BAA2B,CAAC;AACpD,OAAO,EAAE,cAAc,EAAE,SAAS,EAAE,OAAO,EAAE,MAAM,uBAAuB,CAAC;AAM3E,OAAO,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAC;AAC1C,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACrD,OAAO,EAAE,QAAQ,EAAE,MAAM,UAAU,CAAC;AAGpC,yBAAiB,eAAe,CAAC;IAC7B;;;;OAIG;IACH,KAAY,OAAO;QACf;;;;WAIG;QACH,KAAK,UAAU;KAClB;IAED,KAAY,OAAO;QACf;;WAEG;QACH,IAAI,IAAI;QAER;;WAEG;QACH,KAAK,IAAI;QAET;;WAEG;QACH,KAAK,IAAI;QAET;;WAEG;QACH,QAAQ,IAAI;QAEZ;;WAEG;QACH,SAAS,IAAI;QAEb;;WAEG;QACH,QAAQ,IAAI;QAEZ;;WAEG;QACH,GAAG,IAAI;QAEP;;WAEG;QACH,GAAG,IAAI;QAEP;;WAEG;QACH,KAAK,IAAI;QAET;;WAEG;QACH,GAAG,IAAI;QAEP;;;;WAIG;QACH,GAAG,QAAQ;QAEX;;;;;WAKG;QACH,MAAM,QAAQ;QAEd;;;;;WAKG;QACH,KAAK,QAAQ;KAChB;IAED;;;;OAIG;IACI,MAAM,gBAAgB;QACzB;;;;;;;;;;;;WAYG;;QAGH;;;;;WAKG;;MAEL,CAAC;IAEH;;;;OAIG;IACH,UAAiB,aAAc,SAAQ,cAAc,CAAC,OAAO,gBAAgB,CAAC;KAAG;IAEjF;;;;;OAKG;IACI,MAAM,aAAa;QACtB;;;;;;WAMG;;QAGH;;;;WAIG;;QAGH;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;WAmCG;;YAzFH;;;;;;;;;;;;eAYG;;YAGH;;;;;eAKG;;;MAuEL,CAAC;IAEH;;;;;OAKG;IACH,UAAiB,UAAW,SAAQ,cAAc,CAAC,OAAO,aAAa,CAAC;KAAG;IAE3E;;OAEG;IACI,MAAM,IAAI;;;;;YAMT;;;;eAIG;;;;YAKH;;;;;;;;;;;eAWG;;gBA5FP;;;;;;mBAMG;;gBAGH;;;;mBAIG;;gBAGH;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;mBAmCG;;oBAzFH;;;;;;;;;;;;uBAYG;;oBAGH;;;;;uBAKG;;;;YAqHC;;eAEG;;;;YAKH;;;;;;eAMG;;;;;;;;QAIP;;;WAGG;;;;;;;KAEL,CAAC;IAEH;;OAEG;IACI,MAAM,eAAe;;;;;YAtDpB;;;;eAIG;;;;YAKH;;;;;;;;;;;eAWG;;gBA5FP;;;;;;mBAMG;;gBAGH;;;;mBAIG;;gBAGH;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;mBAmCG;;oBAzFH;;;;;;;;;;;;uBAYG;;oBAGH;;;;;uBAKG;;;;YAqHC;;eAEG;;;;YAKH;;;;;;eAMG;;;;;;;;QAIP;;;WAGG;;;;;;;UAO4C,CAAC;IAEpD;;;;;;;;OAQG;IACH,UAAiB,OAAQ,SAAQ,QAAQ,CAAC,OAAO,eAAe,CAAC;KAAG;IAE7D,MAAM,OAAO,EAAE,OAAyB,CAAC;IACzC,MAAM,QAAQ,SAAU,CAAC;CACnC;AAED,MAAM,MAAM,sBAAsB,GAAG,eAAe,CAAC,OAAO,CAAC;AAC7D,eAAO,MAAM,sBAAsB,yBAA0B,CAAC"}

package/dist/cjs/clusters/water-heater-mode.js

@@ -98,9 +98,9 @@ var WaterHeaterMode;
      */
     mode: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvUInt8),
     /**
-     * This field shall contain a list of tags that are associated with the mode option. This may be used by
-     * clients to determine the full or the partial semantics of a certain mode, depending on which tags they
-     * understand, using standard definitions and/or manufacturer specific namespace definitions.
+     * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
+     * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
+     * using standard definitions and/or manufacturer specific namespace definitions.
      *
      * The standard mode tags are defined in this cluster specification. For the derived cluster instances, if the
      * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
@@ -111,8 +111,8 @@ var WaterHeaterMode;
      * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
      * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
      *
-     * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard
-     * and manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
+     * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
+     * manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
      *
      * A few examples are provided below.
      *
@@ -155,8 +155,8 @@ var WaterHeaterMode;
        * At least one entry in the SupportedModes attribute shall include the Off mode tag in the ModeTags field
        * list.
        *
-       * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT
-       * also include an additional instance of any one of these tag types.
+       * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT also
+       * include an additional instance of any one of these tag types.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 9.6.6.1
        */
@@ -178,7 +178,7 @@ var WaterHeaterMode;
        *
        * @see {@link MatterSpecification.v13.Cluster} § 1.10.7.1
        */
-      changeToMode: (0, import_Cluster.Command)(0, import_mode_base.ModeBase.TlvChangeToModeRequest, 0, import_Cluster.TlvNoResponse)
+      changeToMode: (0, import_Cluster.Command)(0, import_mode_base.ModeBase.TlvChangeToModeRequest, 1, import_mode_base.ModeBase.TlvChangeToModeResponse)
     },
     /**
      * This metadata controls which WaterHeaterModeCluster elements matter.js activates for specific feature

package/dist/cjs/clusters/water-heater-mode.js.map

@@ -1,6 +1,6 @@
 {
   "version": 3,
   "sources": ["../../../src/clusters/water-heater-mode.ts"],
-  "mappings": ";;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAQA,4BAA+B;AAC/B,0BAAwB;AACxB,qBAAkE;AAClE,sBAAyB;AACzB,uBAAsD;AACtD,uBAA0B;AAC1B,uBAAkC;AAClC,sBAA4B;AAC5B,uBAAyB;AAGzB,6BAAgC;AAnBhC;AAAA;AAAA;AAAA;AAAA;AAqBO,IAAU;AAAA,CAAV,CAAUA,qBAAV;AAMI,MAAK;AAAL,IAAKC,aAAL;AAMH,IAAAA,SAAA,WAAQ;AAAA,KANA,UAAAD,iBAAA,YAAAA,iBAAA;AASL,MAAK;AAAL,IAAKE,aAAL;AAIH,IAAAA,kBAAA,UAAO,KAAP;AAKA,IAAAA,kBAAA,WAAQ,KAAR;AAKA,IAAAA,kBAAA,WAAQ,KAAR;AAKA,IAAAA,kBAAA,cAAW,KAAX;AAKA,IAAAA,kBAAA,eAAY,KAAZ;AAKA,IAAAA,kBAAA,cAAW,KAAX;AAKA,IAAAA,kBAAA,SAAM,KAAN;AAKA,IAAAA,kBAAA,SAAM,KAAN;AAKA,IAAAA,kBAAA,WAAQ,KAAR;AAKA,IAAAA,kBAAA,SAAM,KAAN;AAOA,IAAAA,kBAAA,SAAM,SAAN;AAQA,IAAAA,kBAAA,YAAS,SAAT;AAQA,IAAAA,kBAAA,WAAQ,SAAR;AAAA,KAxEQ,UAAAF,iBAAA,YAAAA,iBAAA;AAgFL,EAAMA,iBAAA,uBAAmB,4BAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IActC,aAAS,mCAAiB,GAAG,2BAAW;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAQxC,WAAO,2BAAS,OAAG,0BAAoC,CAAC;AAAA,EAC5D,CAAC;AAeM,EAAMA,iBAAA,oBAAgB,4BAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAQnC,WAAO,2BAAS,GAAG,2BAAU,MAAM,EAAE,WAAW,GAAG,CAAC,CAAC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAOrD,UAAM,2BAAS,GAAG,yBAAQ;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAsC1B,cAAU,2BAAS,OAAG,0BAASA,iBAAA,kBAAkB,EAAE,WAAW,EAAE,CAAC,CAAC;AAAA,EACtE,CAAC;AAaM,EAAMA,iBAAA,OAAO,qCAAe,UAAU;AAAA,IACzC,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,UAAU;AAAA,IAEV,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAMN,WAAO,6BAAQ,CAAC;AAAA,IACpB;AAAA,IAEA,YAAY;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAaR,oBAAgB;AAAA,QACZ;AAAA,YACA,0BAASA,iBAAA,eAAe,EAAE,WAAW,GAAG,WAAW,IAAI,CAAC;AAAA,QACxD,EAAE,SAAS,CAAC,EAAE;AAAA,MAClB;AAAA;AAAA;AAAA;AAAA,MAKA,iBAAa,0BAAU,GAAK,2BAAU,EAAE,YAAY,KAAK,CAAC;AAAA,IAC9D;AAAA,IAEA,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAQN,kBAAc,wBAAQ,GAAK,0BAAS,wBAAwB,GAAK,4BAAa;AAAA,IAClF;AAAA;AAAA;AAAA;AAAA;AAAA,IAMA,YAAY,qCAAe,WAAW,EAAE,OAAO,EAAE,OAAO,KAAK,GAAG,WAAW,MAAM,CAAC;AAAA,EACtF,CAAC;AAKM,EAAMA,iBAAA,sBAAkB,sCAAeA,iBAAA,IAAI;AAa3C,EAAMA,iBAAA,UAAmBA,iBAAA;AACzB,EAAMA,iBAAA,WAAWA,iBAAA;AAAA,GAlRX;AAsRV,MAAM,yBAAyB,gBAAgB;AACtD,uCAAgB,SAAS,gBAAgB,QAAQ;",
+  "mappings": ";;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAQA,4BAA+B;AAC/B,0BAAwB;AACxB,qBAAmD;AACnD,sBAAyB;AACzB,uBAAsD;AACtD,uBAA0B;AAC1B,uBAAkC;AAClC,sBAA4B;AAC5B,uBAAyB;AAGzB,6BAAgC;AAnBhC;AAAA;AAAA;AAAA;AAAA;AAqBO,IAAU;AAAA,CAAV,CAAUA,qBAAV;AAMI,MAAK;AAAL,IAAKC,aAAL;AAMH,IAAAA,SAAA,WAAQ;AAAA,KANA,UAAAD,iBAAA,YAAAA,iBAAA;AASL,MAAK;AAAL,IAAKE,aAAL;AAIH,IAAAA,kBAAA,UAAO,KAAP;AAKA,IAAAA,kBAAA,WAAQ,KAAR;AAKA,IAAAA,kBAAA,WAAQ,KAAR;AAKA,IAAAA,kBAAA,cAAW,KAAX;AAKA,IAAAA,kBAAA,eAAY,KAAZ;AAKA,IAAAA,kBAAA,cAAW,KAAX;AAKA,IAAAA,kBAAA,SAAM,KAAN;AAKA,IAAAA,kBAAA,SAAM,KAAN;AAKA,IAAAA,kBAAA,WAAQ,KAAR;AAKA,IAAAA,kBAAA,SAAM,KAAN;AAOA,IAAAA,kBAAA,SAAM,SAAN;AAQA,IAAAA,kBAAA,YAAS,SAAT;AAQA,IAAAA,kBAAA,WAAQ,SAAR;AAAA,KAxEQ,UAAAF,iBAAA,YAAAA,iBAAA;AAgFL,EAAMA,iBAAA,uBAAmB,4BAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IActC,aAAS,mCAAiB,GAAG,2BAAW;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAQxC,WAAO,2BAAS,OAAG,0BAAoC,CAAC;AAAA,EAC5D,CAAC;AAeM,EAAMA,iBAAA,oBAAgB,4BAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAQnC,WAAO,2BAAS,GAAG,2BAAU,MAAM,EAAE,WAAW,GAAG,CAAC,CAAC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAOrD,UAAM,2BAAS,GAAG,yBAAQ;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAsC1B,cAAU,2BAAS,OAAG,0BAASA,iBAAA,kBAAkB,EAAE,WAAW,EAAE,CAAC,CAAC;AAAA,EACtE,CAAC;AAaM,EAAMA,iBAAA,OAAO,qCAAe,UAAU;AAAA,IACzC,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,UAAU;AAAA,IAEV,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAMN,WAAO,6BAAQ,CAAC;AAAA,IACpB;AAAA,IAEA,YAAY;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAaR,oBAAgB;AAAA,QACZ;AAAA,YACA,0BAASA,iBAAA,eAAe,EAAE,WAAW,GAAG,WAAW,IAAI,CAAC;AAAA,QACxD,EAAE,SAAS,CAAC,EAAE;AAAA,MAClB;AAAA;AAAA;AAAA;AAAA,MAKA,iBAAa,0BAAU,GAAK,2BAAU,EAAE,YAAY,KAAK,CAAC;AAAA,IAC9D;AAAA,IAEA,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAQN,kBAAc,wBAAQ,GAAK,0BAAS,wBAAwB,GAAK,0BAAS,uBAAuB;AAAA,IACrG;AAAA;AAAA;AAAA;AAAA;AAAA,IAMA,YAAY,qCAAe,WAAW,EAAE,OAAO,EAAE,OAAO,KAAK,GAAG,WAAW,MAAM,CAAC;AAAA,EACtF,CAAC;AAKM,EAAMA,iBAAA,sBAAkB,sCAAeA,iBAAA,IAAI;AAa3C,EAAMA,iBAAA,UAAmBA,iBAAA;AACzB,EAAMA,iBAAA,WAAWA,iBAAA;AAAA,GAlRX;AAsRV,MAAM,yBAAyB,gBAAgB;AACtD,uCAAgB,SAAS,gBAAgB,QAAQ;",
   "names": ["WaterHeaterMode", "Feature", "ModeTag"]
 }

package/dist/cjs/clusters/water-tank-level-monitoring.d.ts

@@ -105,8 +105,8 @@ export declare namespace WaterTankLevelMonitoring {
     /**
      * This cluster supports all WaterTankLevelMonitoring features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     const CompleteInstance: MutableCluster<{
         readonly id: 121;