@matter/types 0.13.0-alpha.0-20250311-3eb0af5f2 → 0.13.0-alpha.0-20250322-f085fa576

package/src/clusters/power-source.ts

@@ -944,10 +944,9 @@ export namespace PowerSource {
     export const WiredComponent = MutableCluster.Component({
         attributes: {
             /**
-             * Indicates the assessed RMS or DC voltage currently provided by the hard-wired source, in mV
-             * (millivolts). A value of NULL shall indicate the Node is currently unable to assess the value. If the
-             * wired source is not connected, but the Node is still able to assess a value, then the assessed value may
-             * be reported.
+             * Indicates the assessed RMS or DC voltage currently provided by the hard-wired source, in mV (millivolts).
+             * A value of NULL shall indicate the Node is currently unable to assess the value. If the wired source is
+             * not connected, but the Node is still able to assess a value, then the assessed value may be reported.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.7.4
              */
@@ -955,8 +954,8 @@ export namespace PowerSource {
 
             /**
              * Indicates the assessed frequency of the voltage, currently provided by the hard-wired source, in Hz. A
-             * value of NULL shall indicate the Node is currently unable to assess the value. If the wired source is
-             * not connected, but the Node is still able to assess a value, then the assessed value may be reported.
+             * value of NULL shall indicate the Node is currently unable to assess the value. If the wired source is not
+             * connected, but the Node is still able to assess a value, then the assessed value may be reported.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.7.5
              */
@@ -1006,12 +1005,12 @@ export namespace PowerSource {
             /**
              * Indicates the set of wired faults currently detected by the Node on this power source. This set is
              * represented as a list of WiredFaultEnum. When the Node detects a fault has been raised, the appropriate
-             * WiredFaultEnum value shall be added to this list, provided it is not already present. This list shall
-             * NOT contain more than one instance of a specific WiredFaultEnum value. When the Node detects all
-             * conditions contributing to a fault have been cleared, the corresponding WiredFaultEnum value shall be
-             * removed from this list. An empty list shall indicate there are currently no active faults. The order of
-             * this list SHOULD have no significance. Clients interested in monitoring changes in active faults may
-             * subscribe to this attribute, or they may subscribe to WiredFaultChange.
+             * WiredFaultEnum value shall be added to this list, provided it is not already present. This list shall NOT
+             * contain more than one instance of a specific WiredFaultEnum value. When the Node detects all conditions
+             * contributing to a fault have been cleared, the corresponding WiredFaultEnum value shall be removed from
+             * this list. An empty list shall indicate there are currently no active faults. The order of this list
+             * SHOULD have no significance. Clients interested in monitoring changes in active faults may subscribe to
+             * this attribute, or they may subscribe to WiredFaultChange.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.7.11
              */
@@ -1024,8 +1023,8 @@ export namespace PowerSource {
 
         events: {
             /**
-             * The WiredFaultChange Event shall be generated when the set of wired faults currently detected by the
-             * Node on this wired power source changes. This event shall correspond to a change in value of
+             * The WiredFaultChange Event shall be generated when the set of wired faults currently detected by the Node
+             * on this wired power source changes. This event shall correspond to a change in value of
              * ActiveWiredFaults.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.8.1
@@ -1066,8 +1065,8 @@ export namespace PowerSource {
             batPercentRemaining: OptionalAttribute(0xc, TlvNullable(TlvUInt8.bound({ max: 200 }))),
 
             /**
-             * Indicates the estimated time in seconds before the battery will no longer be able to provide power to
-             * the Node. A value of NULL shall indicate the Node is currently unable to assess the value.
+             * Indicates the estimated time in seconds before the battery will no longer be able to provide power to the
+             * Node. A value of NULL shall indicate the Node is currently unable to assess the value.
              *
              * Changes to this attribute shall only be marked as reportable in the following cases:
              *
@@ -1091,8 +1090,8 @@ export namespace PowerSource {
 
             /**
              * Indicates if the battery needs to be replaced. Replacement may be simple routine maintenance, such as
-             * with a single use, non-rechargeable cell. Replacement, however, may also indicate end of life, or
-             * serious fault with a rechargeable or even non-replaceable cell.
+             * with a single use, non-rechargeable cell. Replacement, however, may also indicate end of life, or serious
+             * fault with a rechargeable or even non-replaceable cell.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.7.16
              */
@@ -1131,8 +1130,8 @@ export namespace PowerSource {
 
         events: {
             /**
-             * The BatFaultChange Event shall be generated when the set of battery faults currently detected by the
-             * Node on this battery power source changes. This event shall correspond to a change in value of
+             * The BatFaultChange Event shall be generated when the set of battery faults currently detected by the Node
+             * on this battery power source changes. This event shall correspond to a change in value of
              * ActiveBatFaults.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.8.2
@@ -1200,8 +1199,8 @@ export namespace PowerSource {
     export const ReplaceableOrRechargeableComponent = MutableCluster.Component({
         attributes: {
             /**
-             * Indicates the preferred minimum charge capacity rating in mAh of individual, user- or
-             * factory-serviceable battery cells or packs in the battery source.
+             * Indicates the preferred minimum charge capacity rating in mAh of individual, user- or factory-serviceable
+             * battery cells or packs in the battery source.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.7.25
              */
@@ -1223,8 +1222,8 @@ export namespace PowerSource {
             batChargeState: Attribute(0x1a, TlvEnum<BatChargeState>()),
 
             /**
-             * Indicates the estimated time in seconds before the battery source will be at full charge. A value of
-             * NULL shall indicate the Node is currently unable to assess the value.
+             * Indicates the estimated time in seconds before the battery source will be at full charge. A value of NULL
+             * shall indicate the Node is currently unable to assess the value.
              *
              * Changes to this attribute shall only be marked as reportable in the following cases:
              *
@@ -1259,9 +1258,9 @@ export namespace PowerSource {
              * appropriate BatChargeFaultEnum value shall be added to this list, provided it is not already present.
              * This list shall NOT contain more than one instance of a specific BatChargeFaultEnum value. When the Node
              * detects all conditions contributing to a fault have been cleared, the corresponding BatChargeFaultEnum
-             * value shall be removed from this list. An empty list shall indicate there are currently no active
-             * faults. The order of this list SHOULD have no significance. Clients interested in monitoring changes in
-             * active faults may subscribe to this attribute, or they may subscribe to the BatFaultChange event.
+             * value shall be removed from this list. An empty list shall indicate there are currently no active faults.
+             * The order of this list SHOULD have no significance. Clients interested in monitoring changes in active
+             * faults may subscribe to this attribute, or they may subscribe to the BatFaultChange event.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.7.31
              */
@@ -1274,8 +1273,8 @@ export namespace PowerSource {
 
         events: {
             /**
-             * The BatChargeFaultChange Event shall be generated when the set of charge faults currently detected by
-             * the Node on this battery power source changes. This event shall correspond to a change in value of
+             * The BatChargeFaultChange Event shall be generated when the set of charge faults currently detected by the
+             * Node on this battery power source changes. This event shall correspond to a change in value of
              * ActiveBatChargeFaults.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.7.8.3
@@ -1353,8 +1352,8 @@ export namespace PowerSource {
 
             /**
              * Indicates a list of endpoints that are powered by the source defined by this cluster. Multiple instances
-             * of this cluster may list the same endpoint, because it is possible for power for an endpoint to come
-             * from multiple sources. In that case the Order attribute indicates their priority.
+             * of this cluster may list the same endpoint, because it is possible for power for an endpoint to come from
+             * multiple sources. In that case the Order attribute indicates their priority.
              *
              * For each power source on a node, there shall only be one instance of this cluster.
              *
@@ -1410,8 +1409,8 @@ export namespace PowerSource {
 
     /**
      * This cluster is used to describe the configuration and capabilities of a physical power source that provides
-     * power to one or more endpoints on a node. In case the node has multiple power sources, each shall be described
-     * by its own cluster instance. Each instance of this cluster may be associated with one or more endpoints or the
+     * power to one or more endpoints on a node. In case the node has multiple power sources, each shall be described by
+     * its own cluster instance. Each instance of this cluster may be associated with one or more endpoints or the
      * entire node.
      *
      * Per the Matter specification you cannot use {@link PowerSourceCluster} without enabling certain feature
@@ -1559,8 +1558,8 @@ export namespace PowerSource {
     /**
      * This cluster supports all PowerSource features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/power-topology.ts

@@ -180,8 +180,8 @@ export namespace PowerTopology {
     /**
      * This cluster supports all PowerTopology features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/pressure-measurement.ts

@@ -193,8 +193,8 @@ export namespace PressureMeasurement {
     /**
      * This cluster supports all PressureMeasurement features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/proxy-discovery.ts

@@ -38,8 +38,8 @@ export namespace ProxyDiscovery {
         numAttributePaths: TlvField(1, TlvUInt16),
 
         /**
-         * The number of event paths the client will have in the subscription request. This is a heuristic/hint to
-         * allow a Proxy to better ascertain whether it can support the ensuing subscription.
+         * The number of event paths the client will have in the subscription request. This is a heuristic/hint to allow
+         * a Proxy to better ascertain whether it can support the ensuing subscription.
          *
          * @see {@link MatterSpecification.v13.Core} § 9.15.12.4.1.3
          */
@@ -74,8 +74,8 @@ export namespace ProxyDiscovery {
 
     /**
      * This cluster contains commands needed to do proxy discovery as defined in the Section 9.15.7.3, “Step 2: Proxy
-     * Discovery” and Section 9.15.7.4, “Step 3: Proxy Response” steps of the overall Section 9.15.7, “Proxy Discovery
-     * & Assignment Flow”.
+     * Discovery” and Section 9.15.7.4, “Step 3: Proxy Response” steps of the overall Section 9.15.7, “Proxy Discovery &
+     * Assignment Flow”.
      *
      * @see {@link MatterSpecification.v13.Core} § 9.15.12
      */

package/src/clusters/pump-configuration-and-control.ts

@@ -153,8 +153,8 @@ export namespace PumpConfigurationAndControl {
         /**
          * A remote temperature sensor is used as the sensor for the regulation of the pump.
          *
-         * If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is
-         * interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue])
+         * If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is interpreted
+         * as a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue])
          *
          * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.6
          */
@@ -209,10 +209,10 @@ export namespace PumpConfigurationAndControl {
         /**
          * The pump will regulate its speed to maintain a constant differential pressure over its flanges.
          *
-         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case
-         * of the internal pressure sensor, this will be the range derived from the [MinConstPressure –
-         * MaxConstPressure] attributes. In case of a remote pressure sensor, this will be the range derived from the
-         * [MinMeasuredValue – MaxMeasuredValue] attributes of the remote pressure sensor.
+         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case of
+         * the internal pressure sensor, this will be the range derived from the [MinConstPressure – MaxConstPressure]
+         * attributes. In case of a remote pressure sensor, this will be the range derived from the [MinMeasuredValue –
+         * MaxMeasuredValue] attributes of the remote pressure sensor.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.2
          */
@@ -233,9 +233,9 @@ export namespace PumpConfigurationAndControl {
         /**
          * The pump will regulate its speed to maintain a constant flow through the pump.
          *
-         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case
-         * of the internal flow sensor, this will be the range derived from the [MinConstFlow – MaxConstFlow]
-         * attributes. In case of a remote flow sensor, this will be the range derived from the [MinMeasuredValue –
+         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case of
+         * the internal flow sensor, this will be the range derived from the [MinConstFlow – MaxConstFlow] attributes.
+         * In case of a remote flow sensor, this will be the range derived from the [MinMeasuredValue –
          * MaxMeasuredValue] attributes of the remote flow sensor.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.4
@@ -245,22 +245,22 @@ export namespace PumpConfigurationAndControl {
         /**
          * The pump will regulate its speed to maintain a constant temperature.
          *
-         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case
-         * of the internal temperature sensor, this will be the range derived from the [MinConstTemp – MaxConstTemp]
-         * attributes. In case of a remote temperature sensor, this will be the range derived from the
-         * [MinMeasuredValue – MaxMeasuredValue] attributes of the remote temperature sensor.
+         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case of
+         * the internal temperature sensor, this will be the range derived from the [MinConstTemp – MaxConstTemp]
+         * attributes. In case of a remote temperature sensor, this will be the range derived from the [MinMeasuredValue
+         * – MaxMeasuredValue] attributes of the remote temperature sensor.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.5
          */
         ConstantTemperature = 5,
 
         /**
-         * The operation of the pump is automatically optimized to provide the most suitable performance with respect
-         * to comfort and energy savings.
+         * The operation of the pump is automatically optimized to provide the most suitable performance with respect to
+         * comfort and energy savings.
          *
          * This behavior is manufacturer defined. The pump can be stopped by setting the setpoint of the level control
-         * cluster to 0, or by using the On/Off cluster. If the pump is started (at any setpoint), the speed of the
-         * pump is entirely determined by the pump.
+         * cluster to 0, or by using the On/Off cluster. If the pump is started (at any setpoint), the speed of the pump
+         * is entirely determined by the pump.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.6
          */
@@ -606,8 +606,8 @@ export namespace PumpConfigurationAndControl {
             maxFlow: FixedAttribute(0x2, TlvNullable(TlvUInt16), { default: null }),
 
             /**
-             * This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. Where
-             * a pump controller function is active, the corresponding bit shall be set to 1. Where a pump
+             * This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. Where a
+             * pump controller function is active, the corresponding bit shall be set to 1. Where a pump
              *
              * controller function is not active, the corresponding bit shall be set to 0.
              *
@@ -642,8 +642,8 @@ export namespace PumpConfigurationAndControl {
              *     shall match the behavior of the pump.
              *
              *   • A remote sensor is used as the sensor for regulation of the pump. In this case, EffectiveControlMode
-             *     will display ConstantPressure, ConstantFlow or ConstantTemperature if the remote sensor is a
-             *     pressure sensor, a flow sensor or a temperature sensor respectively, regardless of the value of the
+             *     will display ConstantPressure, ConstantFlow or ConstantTemperature if the remote sensor is a pressure
+             *     sensor, a flow sensor or a temperature sensor respectively, regardless of the value of the
              *     ControlMode attribute.
              *
              * In case the ControlMode attribute is not included on the device and no remote sensors are connected, the
@@ -684,9 +684,9 @@ export namespace PumpConfigurationAndControl {
             speed: OptionalAttribute(0x14, TlvNullable(TlvUInt16), { default: null }),
 
             /**
-             * This attribute specifies the accumulated number of hours that the pump has been powered and the motor
-             * has been running. It is updated dynamically as it increases. It is preserved over power cycles of the
-             * pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at 0 (zero).
+             * This attribute specifies the accumulated number of hours that the pump has been powered and the motor has
+             * been running. It is updated dynamically as it increases. It is preserved over power cycles of the pump.
+             * If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at 0 (zero).
              *
              * This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If the
              * value is not available, this attribute will indicate the null value.
@@ -751,8 +751,8 @@ export namespace PumpConfigurationAndControl {
              * control mode Constant pressure and vice versa for flow and temperature type sensors. This is regardless
              * of the setting of the ControlMode attribute.
              *
-             * If this attribute is Normal and no remote sensor is connected, the control mode of the pump is decided
-             * by the ControlMode attribute.
+             * If this attribute is Normal and no remote sensor is connected, the control mode of the pump is decided by
+             * the ControlMode attribute.
              *
              * OperationMode may be changed at any time, even when the pump is running. The behavior of the pump at the
              * point of changing the value of this attribute is vendor-specific.
@@ -1005,8 +1005,8 @@ export namespace PumpConfigurationAndControl {
     /**
      * This cluster supports all PumpConfigurationAndControl features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/radon-concentration-measurement.ts

@@ -22,8 +22,8 @@ export namespace RadonConcentrationMeasurement {
     /**
      * This alias specializes the semantics of {@link ConcentrationMeasurement.Base}.
      *
-     * Per the Matter specification you cannot use {@link RadonConcentrationMeasurementCluster} without enabling
-     * certain feature combinations. You must use the {@link with} factory method to obtain a working cluster.
+     * Per the Matter specification you cannot use {@link RadonConcentrationMeasurementCluster} without enabling certain
+     * feature combinations. You must use the {@link with} factory method to obtain a working cluster.
      */
     export interface Cluster extends Identity<typeof ClusterInstance> {}
 
@@ -32,8 +32,8 @@ export namespace RadonConcentrationMeasurement {
     /**
      * This cluster supports all RadonConcentrationMeasurement features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export const CompleteInstance = MutableCluster({
         ...ConcentrationMeasurement.Complete,

package/src/clusters/refrigerator-alarm.ts

@@ -75,14 +75,14 @@ export namespace RefrigeratorAlarm {
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.15.8.1.1
          */
-        active: TlvField(1, TlvBitmap(TlvUInt32, Alarm)),
+        active: TlvField(0, TlvBitmap(TlvUInt32, Alarm)),
 
         /**
          * This field shall indicate those alarms that have become inactive.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.15.8.1.2
          */
-        inactive: TlvField(2, TlvBitmap(TlvUInt32, Alarm)),
+        inactive: TlvField(1, TlvBitmap(TlvUInt32, Alarm)),
 
         /**
          * This field shall be a copy of the new State attribute value that resulted in the event being generated. That
@@ -90,14 +90,14 @@ export namespace RefrigeratorAlarm {
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.15.8.1.4
          */
-        state: TlvField(3, TlvBitmap(TlvUInt32, Alarm)),
+        state: TlvField(2, TlvBitmap(TlvUInt32, Alarm)),
 
         /**
          * This field shall be a copy of the Mask attribute when this event was generated.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.15.8.1.3
          */
-        mask: TlvField(4, TlvBitmap(TlvUInt32, Alarm))
+        mask: TlvField(3, TlvBitmap(TlvUInt32, Alarm))
     });
 
     /**
@@ -168,8 +168,8 @@ export namespace RefrigeratorAlarm {
             state: Attribute(0x2, TlvBitmap(TlvUInt32, Alarm)),
 
             /**
-             * Indicates a bitmap where each bit shall represent whether or not an alarm is supported. The value of
-             * true means the alarm is supported, otherwise the alarm is not supported.
+             * Indicates a bitmap where each bit shall represent whether or not an alarm is supported. The value of true
+             * means the alarm is supported, otherwise the alarm is not supported.
              *
              * If an alarm is not supported, the corresponding bit in Mask, Latch, and State shall be false.
              *
@@ -203,8 +203,8 @@ export namespace RefrigeratorAlarm {
     export const ClusterInstance = MutableCluster(Base);
 
     /**
-     * This cluster is a derived cluster of Alarm Base cluster and provides the alarm definition related to
-     * refrigerator and temperature controlled cabinet devices.
+     * This cluster is a derived cluster of Alarm Base cluster and provides the alarm definition related to refrigerator
+     * and temperature controlled cabinet devices.
      *
      * RefrigeratorAlarmCluster supports optional features that you can enable with the RefrigeratorAlarmCluster.with()
      * factory method.
@@ -235,8 +235,8 @@ export namespace RefrigeratorAlarm {
     /**
      * This cluster supports all RefrigeratorAlarm features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/refrigerator-and-temperature-controlled-cabinet-mode.ts

@@ -8,7 +8,7 @@
 
 import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
 import { BitFlag } from "../schema/BitmapSchema.js";
-import { FixedAttribute, Attribute, Command, TlvNoResponse } from "../cluster/Cluster.js";
+import { FixedAttribute, Attribute, Command } from "../cluster/Cluster.js";
 import { TlvArray } from "../tlv/TlvArray.js";
 import { TlvField, TlvOptionalField, TlvObject } from "../tlv/TlvObject.js";
 import { TlvString } from "../tlv/TlvString.js";
@@ -161,9 +161,9 @@ export namespace RefrigeratorAndTemperatureControlledCabinetMode {
         mode: TlvField(1, TlvUInt8),
 
         /**
-         * This field shall contain a list of tags that are associated with the mode option. This may be used by
-         * clients to determine the full or the partial semantics of a certain mode, depending on which tags they
-         * understand, using standard definitions and/or manufacturer specific namespace definitions.
+         * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
+         * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
+         * using standard definitions and/or manufacturer specific namespace definitions.
          *
          * The standard mode tags are defined in this cluster specification. For the derived cluster instances, if the
          * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
@@ -174,8 +174,8 @@ export namespace RefrigeratorAndTemperatureControlledCabinetMode {
          * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
          * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
          *
-         * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard
-         * and manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
+         * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
+         * manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
          *
          * A few examples are provided below.
          *
@@ -251,7 +251,7 @@ export namespace RefrigeratorAndTemperatureControlledCabinetMode {
              *
              * @see {@link MatterSpecification.v13.Cluster} § 1.10.7.1
              */
-            changeToMode: Command(0x0, ModeBase.TlvChangeToModeRequest, 0x0, TlvNoResponse)
+            changeToMode: Command(0x0, ModeBase.TlvChangeToModeRequest, 0x1, ModeBase.TlvChangeToModeResponse)
         },
 
         /**

package/src/clusters/resource-monitoring.ts

@@ -73,8 +73,8 @@ export namespace ResourceMonitoring {
     }
 
     /**
-     * Indicate the type of identifier used to describe the product. Devices SHOULD use globally-recognized IDs over
-     * OEM specific ones.
+     * Indicate the type of identifier used to describe the product. Devices SHOULD use globally-recognized IDs over OEM
+     * specific ones.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 2.8.5.3
      */
@@ -232,8 +232,8 @@ export namespace ResourceMonitoring {
             inPlaceIndicator: OptionalAttribute(0x3, TlvBoolean),
 
             /**
-             * This attribute may indicates the time at which the resource has been changed, if supported by the
-             * server. The attribute shall be null if it was never set or is unknown.
+             * This attribute may indicates the time at which the resource has been changed, if supported by the server.
+             * The attribute shall be null if it was never set or is unknown.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 2.8.6.5
              */
@@ -296,8 +296,8 @@ export namespace ResourceMonitoring {
     /**
      * This cluster supports all ResourceMonitoring features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/rvc-clean-mode.ts

@@ -8,7 +8,7 @@
 
 import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
 import { BitFlag } from "../schema/BitmapSchema.js";
-import { FixedAttribute, Attribute, Command, TlvNoResponse } from "../cluster/Cluster.js";
+import { FixedAttribute, Attribute, Command } from "../cluster/Cluster.js";
 import { TlvArray } from "../tlv/TlvArray.js";
 import { TlvField, TlvOptionalField, TlvObject } from "../tlv/TlvObject.js";
 import { TlvString } from "../tlv/TlvString.js";
@@ -166,9 +166,9 @@ export namespace RvcCleanMode {
         mode: TlvField(1, TlvUInt8),
 
         /**
-         * This field shall contain a list of tags that are associated with the mode option. This may be used by
-         * clients to determine the full or the partial semantics of a certain mode, depending on which tags they
-         * understand, using standard definitions and/or manufacturer specific namespace definitions.
+         * This field shall contain a list of tags that are associated with the mode option. This may be used by clients
+         * to determine the full or the partial semantics of a certain mode, depending on which tags they understand,
+         * using standard definitions and/or manufacturer specific namespace definitions.
          *
          * The standard mode tags are defined in this cluster specification. For the derived cluster instances, if the
          * specification of the derived cluster defines a namespace, the set of standard mode tags also includes the
@@ -179,8 +179,8 @@ export namespace RvcCleanMode {
          * the mode in an automation, or to craft help text their voice-driven interfaces. A mode tag shall be either a
          * standard tag or a manufacturer specific tag, as defined in each ModeTagStruct list entry.
          *
-         * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard
-         * and manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
+         * A mode option may have more than one mode tag. A mode option may be associated with a mixture of standard and
+         * manufacturer specific mode tags. A mode option shall be associated with at least one standard mode tag.
          *
          * A few examples are provided below.
          *
@@ -263,7 +263,7 @@ export namespace RvcCleanMode {
              *
              * @see {@link MatterSpecification.v13.Cluster} § 1.10.7.1
              */
-            changeToMode: Command(0x0, ModeBase.TlvChangeToModeRequest, 0x0, TlvNoResponse)
+            changeToMode: Command(0x0, ModeBase.TlvChangeToModeRequest, 0x1, ModeBase.TlvChangeToModeResponse)
         },
 
         /**

package/src/clusters/rvc-operational-state.ts

@@ -40,9 +40,9 @@ export namespace RvcOperationalState {
      * ### Table 14. RVC Resume Compatibility
      *
      * While in the Charging or Docked states, the device shall NOT attempt to resume unless it transitioned to those
-     * states while operating and can resume, such as, for example, if it is recharging while in a cleaning cycle.
-     * Else, if the operational state is Charging or Docked but there’s no operation to resume or the operation can’t
-     * be resumed, the device shall respond with an OperationalCommandResponse command with an ErrorStateID of
+     * states while operating and can resume, such as, for example, if it is recharging while in a cleaning cycle. Else,
+     * if the operational state is Charging or Docked but there’s no operation to resume or the operation can’t be
+     * resumed, the device shall respond with an OperationalCommandResponse command with an ErrorStateID of
      * CommandInvalidInState but take no further action.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 7.4.4.1
@@ -99,8 +99,8 @@ export namespace RvcOperationalState {
 
         /**
          * This field shall be present if the OperationalStateID is from the set reserved for Manufacturer Specific
-         * States, otherwise it shall NOT be present. If present, this shall contain a human-readable description of
-         * the operational state.
+         * States, otherwise it shall NOT be present. If present, this shall contain a human-readable description of the
+         * operational state.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.14.4.2.2
          */
@@ -226,8 +226,8 @@ export namespace RvcOperationalState {
     export const TlvOperationalCommandResponse = TlvObject({
         /**
          * This shall indicate the success or otherwise of the attempted command invocation. On a successful invocation
-         * of the attempted command, the ErrorStateID shall be populated with NoError. Please see the individual
-         * command sections for additional specific requirements on population.
+         * of the attempted command, the ErrorStateID shall be populated with NoError. Please see the individual command
+         * sections for additional specific requirements on population.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.14.6.5.1
          */
@@ -265,10 +265,10 @@ export namespace RvcOperationalState {
 
         attributes: {
             /**
-             * Indicates a list of names of different phases that the device can go through for the selected function
-             * or mode. The list may not be in sequence order. For example in a washing machine this could include
-             * items such as "pre-soak", "rinse", and "spin". These phases are manufacturer specific and may change
-             * when a different function or mode is selected.
+             * Indicates a list of names of different phases that the device can go through for the selected function or
+             * mode. The list may not be in sequence order. For example in a washing machine this could include items
+             * such as "pre-soak", "rinse", and "spin". These phases are manufacturer specific and may change when a
+             * different function or mode is selected.
              *
              * A null value indicates that the device does not present phases during its operation. When this
              * attribute’s value is null, the CurrentPhase attribute shall also be set to null.
@@ -278,8 +278,8 @@ export namespace RvcOperationalState {
             phaseList: Attribute(0x0, TlvNullable(TlvArray(TlvString, { maxLength: 32 }))),
 
             /**
-             * This attribute represents the current phase of operation being performed by the server. This shall be
-             * the positional index representing the value from the set provided in the PhaseList Attribute,
+             * This attribute represents the current phase of operation being performed by the server. This shall be the
+             * positional index representing the value from the set provided in the PhaseList Attribute,
              *
              * where the first item in that list is an index of 0. Thus, this attribute shall have a maximum value that
              * is "length(PhaseList) - 1".
@@ -313,8 +313,8 @@ export namespace RvcOperationalState {
              *
              *   • When it changes at a rate significantly different from one unit per second.
              *
-             * Changes to this attribute merely due to the normal passage of time with no other dynamic change of
-             * device state shall NOT be reported.
+             * Changes to this attribute merely due to the normal passage of time with no other dynamic change of device
+             * state shall NOT be reported.
              *
              * As this attribute is not being reported during a regular countdown, clients SHOULD NOT rely on the
              * reporting of this attribute in order to keep track of the remaining duration.
@@ -386,8 +386,8 @@ export namespace RvcOperationalState {
 
         events: {
             /**
-             * This event is generated when a reportable error condition is detected. A device that generates this
-             * event shall also set the OperationalState attribute to Error, indicating an error condition.
+             * This event is generated when a reportable error condition is detected. A device that generates this event
+             * shall also set the OperationalState attribute to Error, indicating an error condition.
              *
              * This event shall contain the following fields:
              *